diff options
Diffstat (limited to 'drivers/pci/hotplug/cpci_hotplug_pci.c')
-rw-r--r-- | drivers/pci/hotplug/cpci_hotplug_pci.c | 352 |
1 files changed, 25 insertions, 327 deletions
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 2e969616f298..69eb4fc54f2f 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -32,11 +32,7 @@ #include "pci_hotplug.h" #include "cpci_hotplug.h" -#if !defined(MODULE) #define MY_NAME "cpci_hotplug" -#else -#define MY_NAME THIS_MODULE->name -#endif extern int cpci_debug; @@ -127,38 +123,6 @@ u16 cpci_get_hs_csr(struct slot* slot) return hs_csr; } -#if 0 -u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr) -{ - int hs_cap; - u16 new_hs_csr; - - hs_cap = pci_bus_find_capability(slot->bus, - slot->devfn, - PCI_CAP_ID_CHSWP); - if(!hs_cap) { - return 0xFFFF; - } - - /* Write out the new value */ - if(pci_bus_write_config_word(slot->bus, - slot->devfn, - hs_cap + 2, - hs_csr)) { - return 0xFFFF; - } - - /* Read back what we just wrote out */ - if(pci_bus_read_config_word(slot->bus, - slot->devfn, - hs_cap + 2, - &new_hs_csr)) { - return 0xFFFF; - } - return new_hs_csr; -} -#endif - int cpci_check_and_clear_ins(struct slot* slot) { int hs_cap; @@ -261,7 +225,6 @@ int cpci_led_on(struct slot* slot) return -ENODEV; } if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) { - /* Set LOO */ hs_csr |= HS_CSR_LOO; if(pci_bus_write_config_word(slot->bus, slot->devfn, @@ -293,7 +256,6 @@ int cpci_led_off(struct slot* slot) return -ENODEV; } if(hs_csr & HS_CSR_LOO) { - /* Clear LOO */ hs_csr &= ~HS_CSR_LOO; if(pci_bus_write_config_word(slot->bus, slot->devfn, @@ -312,257 +274,23 @@ int cpci_led_off(struct slot* slot) * Device configuration functions */ -static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev) -{ - u8 irq_pin; - int r; - - dbg("%s - enter", __FUNCTION__); - - /* NOTE: device already setup from prior scan */ - - /* FIXME: How would we know if we need to enable the expansion ROM? */ - pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L); - - /* Assign resources */ - dbg("assigning resources for %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - for (r = 0; r < 6; r++) { - struct resource *res = dev->resource + r; - if(res->flags) - pci_assign_resource(dev, r); - } - dbg("finished assigning resources for %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - - /* Does this function have an interrupt at all? */ - dbg("checking for function interrupt"); - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin); - if(irq_pin) { - dbg("function uses interrupt pin %d", irq_pin); - } - - /* - * Need to explicitly set irq field to 0 so that it'll get assigned - * by the pcibios platform dependent code called by pci_enable_device. - */ - dev->irq = 0; - - dbg("enabling device"); - pci_enable_device(dev); /* XXX check return */ - dbg("now dev->irq = %d", dev->irq); - if(irq_pin && dev->irq) { - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - - /* Can't use pci_insert_device at the moment, do it manually for now */ - pci_proc_attach_device(dev); - dbg("notifying drivers"); - //pci_announce_device_to_drivers(dev); - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev) +static void cpci_enable_device(struct pci_dev *dev) { - int rc; - struct pci_bus* child; - struct resource* r; - u8 max, n; - u16 command; - - dbg("%s - enter", __FUNCTION__); + struct pci_bus *bus; - /* Do basic bridge initialization */ - rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); - if(rc) { - printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__); - } - rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); - if(rc) { - printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__); - } - rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4); - if(rc) { - printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__); - } - - /* - * Set parent bridge's subordinate field so that configuration space - * access will work in pci_scan_bridge and friends. - */ - max = pci_max_busnr(); - bus->subordinate = max + 1; - pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1); - - /* Scan behind bridge */ - n = pci_scan_bridge(bus, dev, max, 2); - child = pci_find_bus(0, max + 1); - if (!child) - return -ENODEV; - pci_proc_attach_bus(child); - - /* - * Update parent bridge's subordinate field if there were more bridges - * behind the bridge that was scanned. - */ - if(n > max) { - bus->subordinate = n; - pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n); - } - - /* - * Update the bridge resources of the bridge to accommodate devices - * behind it. - */ - pci_bus_size_bridges(child); - pci_bus_assign_resources(child); - - /* Enable resource mapping via command register */ - command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - r = child->resource[0]; - if(r && r->start) { - command |= PCI_COMMAND_IO; - } - r = child->resource[1]; - if(r && r->start) { - command |= PCI_COMMAND_MEMORY; - } - r = child->resource[2]; - if(r && r->start) { - command |= PCI_COMMAND_MEMORY; - } - rc = pci_write_config_word(dev, PCI_COMMAND, command); - if(rc) { - err("Error setting command register"); - return rc; - } - - /* Set bridge control register */ - command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA; - rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command); - if(rc) { - err("Error setting bridge control register"); - return rc; - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_bus) -{ - int rc; - struct pci_dev *dev = wrapped_dev->dev; - struct pci_bus *bus = wrapped_bus->bus; - struct slot* slot; - - dbg("%s - enter", __FUNCTION__); - - /* - * We need to fix up the hotplug representation with the Linux - * representation. - */ - if(wrapped_dev->data) { - slot = (struct slot*) wrapped_dev->data; - slot->dev = dev; - } - - /* If it's a bridge, scan behind it for devices */ + pci_enable_device(dev); if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - rc = cpci_configure_bridge(bus, dev); - if(rc) - return rc; - } - - /* Actually configure device */ - if(dev) { - rc = cpci_configure_dev(bus, dev); - if(rc) - return rc; - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_bus) -{ - struct pci_dev *dev = wrapped_dev->dev; - struct slot* slot; - - dbg("%s - enter", __FUNCTION__); - if(!dev) - return -ENODEV; - - /* Remove the Linux representation */ - if(pci_remove_device_safe(dev)) { - err("Could not remove device\n"); - return -1; - } - - /* - * Now remove the hotplug representation. - */ - if(wrapped_dev->data) { - slot = (struct slot*) wrapped_dev->data; - slot->dev = NULL; - } else { - dbg("No hotplug representation for %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus, - struct pci_dev_wrapped *wrapped_dev) -{ - struct pci_bus *bus = wrapped_bus->bus; - struct pci_bus *parent = bus->self->bus; - - dbg("%s - enter", __FUNCTION__); - - /* The cleanup code for proc entries regarding buses should be in the kernel... */ - if(bus->procdir) - dbg("detach_pci_bus %s", bus->procdir->name); - pci_proc_detach_bus(bus); - - /* The cleanup code should live in the kernel... */ - bus->self->subordinate = NULL; - - /* unlink from parent bus */ - list_del(&bus->node); - - /* Now, remove */ - if(bus) - kfree(bus); - - /* Update parent's subordinate field */ - if(parent) { - u8 n = pci_bus_max_busnr(parent); - if(n < parent->subordinate) { - parent->subordinate = n; - pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n); + bus = dev->subordinate; + list_for_each_entry(dev, &bus->devices, bus_list) { + cpci_enable_device(dev); } } - dbg("%s - exit", __FUNCTION__); - return 0; } -static struct pci_visit configure_functions = { - .visit_pci_dev = configure_visit_pci_dev, -}; - -static struct pci_visit unconfigure_functions_phase2 = { - .post_visit_pci_bus = unconfigure_visit_pci_bus_phase2, - .post_visit_pci_dev = unconfigure_visit_pci_dev_phase2 -}; - - int cpci_configure_slot(struct slot* slot) { - int rc = 0; + unsigned char busnr; + struct pci_bus *child; dbg("%s - enter", __FUNCTION__); @@ -588,74 +316,44 @@ int cpci_configure_slot(struct slot* slot) slot->dev = pci_find_slot(slot->bus->number, slot->devfn); if(slot->dev == NULL) { err("Could not find PCI device for slot %02x", slot->number); - return 0; + return 1; } } - dbg("slot->dev = %p", slot->dev); - if(slot->dev) { - struct pci_dev *dev; - struct pci_dev_wrapped wrapped_dev; - struct pci_bus_wrapped wrapped_bus; - int i; - - memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped)); - memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped)); - - for (i = 0; i < 8; i++) { - dev = pci_find_slot(slot->bus->number, - PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i)); - if(!dev) - continue; - wrapped_dev.dev = dev; - wrapped_bus.bus = slot->dev->bus; - if(i) - wrapped_dev.data = NULL; - else - wrapped_dev.data = (void*) slot; - rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus); - } + + if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr); + child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr); + pci_do_scan_bus(child); + pci_bus_size_bridges(child); } - dbg("%s - exit, rc = %d", __FUNCTION__, rc); - return rc; + pci_bus_assign_resources(slot->dev->bus); + + cpci_enable_device(slot->dev); + + dbg("%s - exit", __FUNCTION__); + return 0; } int cpci_unconfigure_slot(struct slot* slot) { - int rc = 0; int i; - struct pci_dev_wrapped wrapped_dev; - struct pci_bus_wrapped wrapped_bus; struct pci_dev *dev; dbg("%s - enter", __FUNCTION__); - if(!slot->dev) { err("No device for slot %02x\n", slot->number); return -ENODEV; } - memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped)); - memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped)); - for (i = 0; i < 8; i++) { dev = pci_find_slot(slot->bus->number, PCI_DEVFN(PCI_SLOT(slot->devfn), i)); if(dev) { - wrapped_dev.dev = dev; - wrapped_bus.bus = dev->bus; - if(i) - wrapped_dev.data = NULL; - else - wrapped_dev.data = (void*) slot; - dbg("%s - unconfigure phase 2", __FUNCTION__); - rc = pci_visit_dev(&unconfigure_functions_phase2, - &wrapped_dev, - &wrapped_bus); - if(rc) - break; + pci_remove_bus_device(dev); + slot->dev = NULL; } } - dbg("%s - exit, rc = %d", __FUNCTION__, rc); - return rc; + dbg("%s - exit", __FUNCTION__); + return 0; } |