summaryrefslogtreecommitdiffstats
path: root/drivers/pci/dwc/pcie-designware.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/dwc/pcie-designware.c')
-rw-r--r--drivers/pci/dwc/pcie-designware.c233
1 files changed, 233 insertions, 0 deletions
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
new file mode 100644
index 000000000000..7e1fb7d6643c
--- /dev/null
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -0,0 +1,233 @@
+/*
+ * Synopsys Designware PCIe host controller driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+/* PCIe Port Logic registers */
+#define PLR_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
+#define PCIE_PHY_DEBUG_R1_LINK_UP (0x1 << 4)
+#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING (0x1 << 29)
+
+int dw_pcie_read(void __iomem *addr, int size, u32 *val)
+{
+ if ((uintptr_t)addr & (size - 1)) {
+ *val = 0;
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ if (size == 4) {
+ *val = readl(addr);
+ } else if (size == 2) {
+ *val = readw(addr);
+ } else if (size == 1) {
+ *val = readb(addr);
+ } else {
+ *val = 0;
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+int dw_pcie_write(void __iomem *addr, int size, u32 val)
+{
+ if ((uintptr_t)addr & (size - 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (size == 4)
+ writel(val, addr);
+ else if (size == 2)
+ writew(val, addr);
+ else if (size == 1)
+ writeb(val, addr);
+ else
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+u32 dw_pcie_readl_dbi(struct dw_pcie *pci, u32 reg)
+{
+ if (pci->ops->readl_dbi)
+ return pci->ops->readl_dbi(pci, reg);
+
+ return readl(pci->dbi_base + reg);
+}
+
+void dw_pcie_writel_dbi(struct dw_pcie *pci, u32 reg, u32 val)
+{
+ if (pci->ops->writel_dbi)
+ pci->ops->writel_dbi(pci, reg, val);
+ else
+ writel(val, pci->dbi_base + reg);
+}
+
+static u32 dw_pcie_readl_unroll(struct dw_pcie *pci, u32 index, u32 reg)
+{
+ u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+ return dw_pcie_readl_dbi(pci, offset + reg);
+}
+
+static void dw_pcie_writel_unroll(struct dw_pcie *pci, u32 index, u32 reg,
+ u32 val)
+{
+ u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
+
+ dw_pcie_writel_dbi(pci, offset + reg, val);
+}
+
+void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
+ u64 cpu_addr, u64 pci_addr, u32 size)
+{
+ u32 retries, val;
+
+ if (pci->iatu_unroll_enabled) {
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
+ lower_32_bits(cpu_addr));
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
+ upper_32_bits(cpu_addr));
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
+ lower_32_bits(cpu_addr + size - 1));
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
+ lower_32_bits(pci_addr));
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
+ upper_32_bits(pci_addr));
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
+ type);
+ dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
+ PCIE_ATU_ENABLE);
+ } else {
+ dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
+ PCIE_ATU_REGION_OUTBOUND | index);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
+ lower_32_bits(cpu_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
+ upper_32_bits(cpu_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
+ lower_32_bits(cpu_addr + size - 1));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
+ lower_32_bits(pci_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
+ upper_32_bits(pci_addr));
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
+ }
+
+ /*
+ * Make sure ATU enable takes effect before any subsequent config
+ * and I/O accesses.
+ */
+ for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
+ if (pci->iatu_unroll_enabled)
+ val = dw_pcie_readl_unroll(pci, index,
+ PCIE_ATU_UNR_REGION_CTRL2);
+ else
+ val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
+
+ if (val == PCIE_ATU_ENABLE)
+ return;
+
+ usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
+ }
+ dev_err(pci->dev, "iATU is not being enabled\n");
+}
+
+int dw_pcie_wait_for_link(struct dw_pcie *pci)
+{
+ int retries;
+
+ /* check if the link is up or not */
+ for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
+ if (dw_pcie_link_up(pci)) {
+ dev_info(pci->dev, "link up\n");
+ return 0;
+ }
+ usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
+ }
+
+ dev_err(pci->dev, "phy link never came up\n");
+
+ return -ETIMEDOUT;
+}
+
+int dw_pcie_link_up(struct dw_pcie *pci)
+{
+ u32 val;
+
+ if (pci->ops->link_up)
+ return pci->ops->link_up(pci);
+
+ val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
+ return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
+ (!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
+}
+
+void dw_pcie_setup(struct dw_pcie *pci)
+{
+ int ret;
+ u32 val;
+ u32 lanes;
+ struct device *dev = pci->dev;
+ struct device_node *np = dev->of_node;
+
+ ret = of_property_read_u32(np, "num-lanes", &lanes);
+ if (ret)
+ lanes = 0;
+
+ /* set the number of lanes */
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
+ val &= ~PORT_LINK_MODE_MASK;
+ switch (lanes) {
+ case 1:
+ val |= PORT_LINK_MODE_1_LANES;
+ break;
+ case 2:
+ val |= PORT_LINK_MODE_2_LANES;
+ break;
+ case 4:
+ val |= PORT_LINK_MODE_4_LANES;
+ break;
+ case 8:
+ val |= PORT_LINK_MODE_8_LANES;
+ break;
+ default:
+ dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes);
+ return;
+ }
+ dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
+
+ /* set link width speed control register */
+ val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+ val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
+ switch (lanes) {
+ case 1:
+ val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
+ break;
+ case 2:
+ val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
+ break;
+ case 4:
+ val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
+ break;
+ case 8:
+ val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
+ break;
+ }
+ dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+}
OpenPOWER on IntegriCloud