diff options
Diffstat (limited to 'drivers/parisc')
| -rw-r--r-- | drivers/parisc/Kconfig | 33 | ||||
| -rw-r--r-- | drivers/parisc/ccio-dma.c | 1 | ||||
| -rw-r--r-- | drivers/parisc/dino.c | 5 | ||||
| -rw-r--r-- | drivers/parisc/eisa.c | 4 | ||||
| -rw-r--r-- | drivers/parisc/gsc.c | 9 | ||||
| -rw-r--r-- | drivers/parisc/iosapic.c | 2 | ||||
| -rw-r--r-- | drivers/parisc/led.c | 12 | ||||
| -rw-r--r-- | drivers/parisc/pdc_stable.c | 223 | ||||
| -rw-r--r-- | drivers/parisc/power.c | 1 | ||||
| -rw-r--r-- | drivers/parisc/sba_iommu.c | 18 | ||||
| -rw-r--r-- | drivers/parisc/superio.c | 4 |
11 files changed, 254 insertions, 58 deletions
diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig index 3f5de867acd7..1d3b84b4af3f 100644 --- a/drivers/parisc/Kconfig +++ b/drivers/parisc/Kconfig @@ -140,18 +140,37 @@ config CHASSIS_LCD_LED If unsure, say Y. config PDC_CHASSIS - bool "PDC chassis State Panel support" + bool "PDC chassis state codes support" default y help - Say Y here if you want to enable support for the LED State front - panel as found on E class, and support for the GSP Virtual Front - Panel (LED State and message logging) as found on high end - servers such as A, L and N-class. - - This has nothing to do with Chassis LCD and LED support. + Say Y here if you want to enable support for Chassis codes. + That includes support for LED State front panel as found on E + class, and support for the GSP Virtual Front Panel (LED State and + message logging) as found on high end servers such as A, L and + N-class. + This driver will also display progress messages on LCD display, + such as "INI", "RUN" and "FLT", and might thus clobber messages + shown by the LED/LCD driver. + This driver updates the state panel (LED and/or LCD) upon system + state change (eg: boot, shutdown or panic). If unsure, say Y. + +config PDC_CHASSIS_WARN + bool "PDC chassis warnings support" + depends on PROC_FS + default y + help + Say Y here if you want to enable support for Chassis warnings. + This will add a proc entry '/proc/chassis' giving some information + about the overall health state of the system. + This includes NVRAM battery level, overtemp or failures such as + fans or power units. + + If unsure, say Y. + + config PDC_STABLE tristate "PDC Stable Storage support" depends on SYSFS diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index a5d826237b26..68cb3a080050 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -31,7 +31,6 @@ ** the coherency design originally worked out. Only PCX-W does. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/init.h> #include <linux/mm.h> diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index 6e8ed0c81a6c..0d96c50ffe9c 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -43,7 +43,6 @@ ** for PCI drivers devices which implement/use MMIO registers. */ -#include <linux/config.h> #include <linux/delay.h> #include <linux/types.h> #include <linux/kernel.h> @@ -299,7 +298,7 @@ struct pci_port_ops dino_port_ops = { static void dino_disable_irq(unsigned int irq) { - struct dino_device *dino_dev = irq_desc[irq].handler_data; + struct dino_device *dino_dev = irq_desc[irq].chip_data; int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS); DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq); @@ -311,7 +310,7 @@ static void dino_disable_irq(unsigned int irq) static void dino_enable_irq(unsigned int irq) { - struct dino_device *dino_dev = irq_desc[irq].handler_data; + struct dino_device *dino_dev = irq_desc[irq].chip_data; int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS); u32 tmp; diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c index 9d3bd15bf53b..884965cedec9 100644 --- a/drivers/parisc/eisa.c +++ b/drivers/parisc/eisa.c @@ -340,7 +340,7 @@ static int __devinit eisa_probe(struct parisc_device *dev) } pcibios_register_hba(&eisa_dev.hba); - result = request_irq(dev->irq, eisa_irq, SA_SHIRQ, "EISA", &eisa_dev); + result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev); if (result) { printk(KERN_ERR "EISA: request_irq failed!\n"); return result; @@ -350,7 +350,7 @@ static int __devinit eisa_probe(struct parisc_device *dev) irq_desc[2].action = &irq2_action; for (i = 0; i < 16; i++) { - irq_desc[i].handler = &eisa_interrupt_type; + irq_desc[i].chip = &eisa_interrupt_type; } EISA_bus = 1; diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c index 16d40f95978d..b45aa5c675a0 100644 --- a/drivers/parisc/gsc.c +++ b/drivers/parisc/gsc.c @@ -14,7 +14,6 @@ */ #include <linux/bitops.h> -#include <linux/config.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -109,7 +108,7 @@ int gsc_find_local_irq(unsigned int irq, int *global_irqs, int limit) static void gsc_asic_disable_irq(unsigned int irq) { - struct gsc_asic *irq_dev = irq_desc[irq].handler_data; + struct gsc_asic *irq_dev = irq_desc[irq].chip_data; int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32); u32 imr; @@ -124,7 +123,7 @@ static void gsc_asic_disable_irq(unsigned int irq) static void gsc_asic_enable_irq(unsigned int irq) { - struct gsc_asic *irq_dev = irq_desc[irq].handler_data; + struct gsc_asic *irq_dev = irq_desc[irq].chip_data; int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32); u32 imr; @@ -164,8 +163,8 @@ int gsc_assign_irq(struct hw_interrupt_type *type, void *data) if (irq > GSC_IRQ_MAX) return NO_IRQ; - irq_desc[irq].handler = type; - irq_desc[irq].handler_data = data; + irq_desc[irq].chip = type; + irq_desc[irq].chip_data = data; return irq++; } diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c index 7a458d5bc751..1fbda77cefc2 100644 --- a/drivers/parisc/iosapic.c +++ b/drivers/parisc/iosapic.c @@ -619,7 +619,7 @@ iosapic_set_irt_data( struct vector_info *vi, u32 *dp0, u32 *dp1) static struct vector_info *iosapic_get_vector(unsigned int irq) { - return irq_desc[irq].handler_data; + return irq_desc[irq].chip_data; } static void iosapic_disable_irq(unsigned int irq) diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c index 298f2ddb2c17..bf00fa2537bb 100644 --- a/drivers/parisc/led.c +++ b/drivers/parisc/led.c @@ -23,7 +23,6 @@ * David Pye <dmp@davidmpye.dyndns.org> */ -#include <linux/config.h> #include <linux/module.h> #include <linux/stddef.h> /* for offsetof() */ #include <linux/init.h> @@ -411,16 +410,17 @@ static __inline__ int led_get_net_activity(void) static __inline__ int led_get_diskio_activity(void) { static unsigned long last_pgpgin, last_pgpgout; - struct page_state pgstat; + unsigned long events[NR_VM_EVENT_ITEMS]; int changed; - get_full_page_state(&pgstat); /* get no of sectors in & out */ + all_vm_events(events); /* Just use a very simple calculation here. Do not care about overflow, since we only want to know if there was activity or not. */ - changed = (pgstat.pgpgin != last_pgpgin) || (pgstat.pgpgout != last_pgpgout); - last_pgpgin = pgstat.pgpgin; - last_pgpgout = pgstat.pgpgout; + changed = (events[PGPGIN] != last_pgpgin) || + (events[PGPGOUT] != last_pgpgout); + last_pgpgin = events[PGPGIN]; + last_pgpgout = events[PGPGOUT]; return (changed ? LED_DISK_IO : 0); } diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index bbeabe3fc4c6..ea1b7a63598e 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -28,8 +28,15 @@ * following code can deal with just 96 bytes of Stable Storage, and all * sizes between 96 and 192 bytes (provided they are multiple of struct * device_path size, eg: 128, 160 and 192) to provide full information. - * The code makes no use of data above 192 bytes. One last word: there's one - * path we can always count on: the primary path. + * One last word: there's one path we can always count on: the primary path. + * Anything above 224 bytes is used for 'osdep2' OS-dependent storage area. + * + * The first OS-dependent area should always be available. Obviously, this is + * not true for the other one. Also bear in mind that reading/writing from/to + * osdep2 is much more expensive than from/to osdep1. + * NOTE: We do not handle the 2 bytes OS-dep area at 0x5D, nor the first + * 2 bytes of storage available right after OSID. That's a total of 4 bytes + * sacrificed: -ETOOLAZY :P * * The current policy wrt file permissions is: * - write: root only @@ -64,15 +71,18 @@ #include <asm/uaccess.h> #include <asm/hardware.h> -#define PDCS_VERSION "0.22" +#define PDCS_VERSION "0.30" #define PDCS_PREFIX "PDC Stable Storage" #define PDCS_ADDR_PPRI 0x00 #define PDCS_ADDR_OSID 0x40 +#define PDCS_ADDR_OSD1 0x48 +#define PDCS_ADDR_DIAG 0x58 #define PDCS_ADDR_FSIZ 0x5C #define PDCS_ADDR_PCON 0x60 #define PDCS_ADDR_PALT 0x80 #define PDCS_ADDR_PKBD 0xA0 +#define PDCS_ADDR_OSD2 0xE0 MODULE_AUTHOR("Thibaut VARENE <varenet@parisc-linux.org>"); MODULE_DESCRIPTION("sysfs interface to HP PDC Stable Storage data"); @@ -82,6 +92,9 @@ MODULE_VERSION(PDCS_VERSION); /* holds Stable Storage size. Initialized once and for all, no lock needed */ static unsigned long pdcs_size __read_mostly; +/* holds OS ID. Initialized once and for all, hopefully to 0x0006 */ +static u16 pdcs_osid __read_mostly; + /* This struct defines what we need to deal with a parisc pdc path entry */ struct pdcspath_entry { rwlock_t rw_lock; /* to protect path entry access */ @@ -609,27 +622,64 @@ static ssize_t pdcs_osid_read(struct subsystem *entry, char *buf) { char *out = buf; - __u32 result; - char *tmpstr = NULL; if (!entry || !buf) return -EINVAL; - /* get OSID */ - if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK) + out += sprintf(out, "%s dependent data (0x%.4x)\n", + os_id_to_string(pdcs_osid), pdcs_osid); + + return out - buf; +} + +/** + * pdcs_osdep1_read - Stable Storage OS-Dependent data area 1 output. + * @entry: An allocated and populated subsytem struct. We don't use it tho. + * @buf: The output buffer to write to. + * + * This can hold 16 bytes of OS-Dependent data. + */ +static ssize_t +pdcs_osdep1_read(struct subsystem *entry, char *buf) +{ + char *out = buf; + u32 result[4]; + + if (!entry || !buf) + return -EINVAL; + + if (pdc_stable_read(PDCS_ADDR_OSD1, &result, sizeof(result)) != PDC_OK) return -EIO; - /* the actual result is 16 bits away */ - switch (result >> 16) { - case 0x0000: tmpstr = "No OS-dependent data"; break; - case 0x0001: tmpstr = "HP-UX dependent data"; break; - case 0x0002: tmpstr = "MPE-iX dependent data"; break; - case 0x0003: tmpstr = "OSF dependent data"; break; - case 0x0004: tmpstr = "HP-RT dependent data"; break; - case 0x0005: tmpstr = "Novell Netware dependent data"; break; - default: tmpstr = "Unknown"; break; - } - out += sprintf(out, "%s (0x%.4x)\n", tmpstr, (result >> 16)); + out += sprintf(out, "0x%.8x\n", result[0]); + out += sprintf(out, "0x%.8x\n", result[1]); + out += sprintf(out, "0x%.8x\n", result[2]); + out += sprintf(out, "0x%.8x\n", result[3]); + + return out - buf; +} + +/** + * pdcs_diagnostic_read - Stable Storage Diagnostic register output. + * @entry: An allocated and populated subsytem struct. We don't use it tho. + * @buf: The output buffer to write to. + * + * I have NFC how to interpret the content of that register ;-). + */ +static ssize_t +pdcs_diagnostic_read(struct subsystem *entry, char *buf) +{ + char *out = buf; + u32 result; + + if (!entry || !buf) + return -EINVAL; + + /* get diagnostic */ + if (pdc_stable_read(PDCS_ADDR_DIAG, &result, sizeof(result)) != PDC_OK) + return -EIO; + + out += sprintf(out, "0x%.4x\n", (result >> 16)); return out - buf; } @@ -645,7 +695,7 @@ static ssize_t pdcs_fastsize_read(struct subsystem *entry, char *buf) { char *out = buf; - __u32 result; + u32 result; if (!entry || !buf) return -EINVAL; @@ -664,6 +714,39 @@ pdcs_fastsize_read(struct subsystem *entry, char *buf) } /** + * pdcs_osdep2_read - Stable Storage OS-Dependent data area 2 output. + * @entry: An allocated and populated subsytem struct. We don't use it tho. + * @buf: The output buffer to write to. + * + * This can hold pdcs_size - 224 bytes of OS-Dependent data, when available. + */ +static ssize_t +pdcs_osdep2_read(struct subsystem *entry, char *buf) +{ + char *out = buf; + unsigned long size; + unsigned short i; + u32 result; + + if (unlikely(pdcs_size <= 224)) + return -ENODATA; + + size = pdcs_size - 224; + + if (!entry || !buf) + return -EINVAL; + + for (i=0; i<size; i+=4) { + if (unlikely(pdc_stable_read(PDCS_ADDR_OSD2 + i, &result, + sizeof(result)) != PDC_OK)) + return -EIO; + out += sprintf(out, "0x%.8x\n", result); + } + + return out - buf; +} + +/** * pdcs_auto_write - This function handles autoboot/search flag modifying. * @entry: An allocated and populated subsytem struct. We don't use it tho. * @buf: The input buffer to read from. @@ -770,13 +853,100 @@ pdcs_autosearch_write(struct subsystem *entry, const char *buf, size_t count) return pdcs_auto_write(entry, buf, count, PF_AUTOSEARCH); } +/** + * pdcs_osdep1_write - Stable Storage OS-Dependent data area 1 input. + * @entry: An allocated and populated subsytem struct. We don't use it tho. + * @buf: The input buffer to read from. + * @count: The number of bytes to be read. + * + * This can store 16 bytes of OS-Dependent data. We use a byte-by-byte + * write approach. It's up to userspace to deal with it when constructing + * its input buffer. + */ +static ssize_t +pdcs_osdep1_write(struct subsystem *entry, const char *buf, size_t count) +{ + u8 in[16]; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (!entry || !buf || !count) + return -EINVAL; + + if (unlikely(pdcs_osid != OS_ID_LINUX)) + return -EPERM; + + if (count > 16) + return -EMSGSIZE; + + /* We'll use a local copy of buf */ + memset(in, 0, 16); + memcpy(in, buf, count); + + if (pdc_stable_write(PDCS_ADDR_OSD1, &in, sizeof(in)) != PDC_OK) + return -EIO; + + return count; +} + +/** + * pdcs_osdep2_write - Stable Storage OS-Dependent data area 2 input. + * @entry: An allocated and populated subsytem struct. We don't use it tho. + * @buf: The input buffer to read from. + * @count: The number of bytes to be read. + * + * This can store pdcs_size - 224 bytes of OS-Dependent data. We use a + * byte-by-byte write approach. It's up to userspace to deal with it when + * constructing its input buffer. + */ +static ssize_t +pdcs_osdep2_write(struct subsystem *entry, const char *buf, size_t count) +{ + unsigned long size; + unsigned short i; + u8 in[4]; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + if (!entry || !buf || !count) + return -EINVAL; + + if (unlikely(pdcs_size <= 224)) + return -ENOSYS; + + if (unlikely(pdcs_osid != OS_ID_LINUX)) + return -EPERM; + + size = pdcs_size - 224; + + if (count > size) + return -EMSGSIZE; + + /* We'll use a local copy of buf */ + + for (i=0; i<count; i+=4) { + memset(in, 0, 4); + memcpy(in, buf+i, (count-i < 4) ? count-i : 4); + if (unlikely(pdc_stable_write(PDCS_ADDR_OSD2 + i, &in, + sizeof(in)) != PDC_OK)) + return -EIO; + } + + return count; +} + /* The remaining attributes. */ static PDCS_ATTR(size, 0444, pdcs_size_read, NULL); static PDCS_ATTR(autoboot, 0644, pdcs_autoboot_read, pdcs_autoboot_write); static PDCS_ATTR(autosearch, 0644, pdcs_autosearch_read, pdcs_autosearch_write); static PDCS_ATTR(timer, 0444, pdcs_timer_read, NULL); -static PDCS_ATTR(osid, 0400, pdcs_osid_read, NULL); +static PDCS_ATTR(osid, 0444, pdcs_osid_read, NULL); +static PDCS_ATTR(osdep1, 0600, pdcs_osdep1_read, pdcs_osdep1_write); +static PDCS_ATTR(diagnostic, 0400, pdcs_diagnostic_read, NULL); static PDCS_ATTR(fastsize, 0400, pdcs_fastsize_read, NULL); +static PDCS_ATTR(osdep2, 0600, pdcs_osdep2_read, pdcs_osdep2_write); static struct subsys_attribute *pdcs_subsys_attrs[] = { &pdcs_attr_size, @@ -784,7 +954,10 @@ static struct subsys_attribute *pdcs_subsys_attrs[] = { &pdcs_attr_autosearch, &pdcs_attr_timer, &pdcs_attr_osid, + &pdcs_attr_osdep1, + &pdcs_attr_diagnostic, &pdcs_attr_fastsize, + &pdcs_attr_osdep2, NULL, }; @@ -865,6 +1038,7 @@ pdc_stable_init(void) { struct subsys_attribute *attr; int i, rc = 0, error = 0; + u32 result; /* find the size of the stable storage */ if (pdc_stable_get_size(&pdcs_size) != PDC_OK) @@ -876,6 +1050,13 @@ pdc_stable_init(void) printk(KERN_INFO PDCS_PREFIX " facility v%s\n", PDCS_VERSION); + /* get OSID */ + if (pdc_stable_read(PDCS_ADDR_OSID, &result, sizeof(result)) != PDC_OK) + return -EIO; + + /* the actual result is 16 bits away */ + pdcs_osid = (u16)(result >> 16); + /* For now we'll register the stable subsys within this driver */ if ((rc = firmware_register(&stable_subsys))) goto fail_firmreg; @@ -887,7 +1068,7 @@ pdc_stable_init(void) /* register the paths subsys as a subsystem of stable subsys */ kset_set_kset_s(&paths_subsys, stable_subsys); - if ((rc= subsystem_register(&paths_subsys))) + if ((rc = subsystem_register(&paths_subsys))) goto fail_subsysreg; /* now we create all "files" for the paths subsys */ diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c index 0bcab83b4080..fad5a33bf0fa 100644 --- a/drivers/parisc/power.c +++ b/drivers/parisc/power.c @@ -35,7 +35,6 @@ * runtime through the "/proc/sys/kernel/power" procfs entry. */ -#include <linux/config.h> #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 278f325021ee..8b4732815511 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -19,7 +19,6 @@ ** FIXME: add DMA hint support programming in both sba and lba modules. */ -#include <linux/config.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/spinlock.h> @@ -316,10 +315,10 @@ static int reserve_sba_gart = 1; ** ** Superdome (in particular, REO) allows only 64-bit CSR accesses. */ -#define READ_REG32(addr) le32_to_cpu(__raw_readl(addr)) -#define READ_REG64(addr) le64_to_cpu(__raw_readq(addr)) -#define WRITE_REG32(val, addr) __raw_writel(cpu_to_le32(val), addr) -#define WRITE_REG64(val, addr) __raw_writeq(cpu_to_le64(val), addr) +#define READ_REG32(addr) readl(addr) +#define READ_REG64(addr) readq(addr) +#define WRITE_REG32(val, addr) writel((val), (addr)) +#define WRITE_REG64(val, addr) writeq((val), (addr)) #ifdef CONFIG_64BIT #define READ_REG(addr) READ_REG64(addr) @@ -1427,7 +1426,7 @@ sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT)); ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64); - DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits)\n", + DBG_INIT("%s() hpa 0x%p IOV %dMB (%d bits)\n", __FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20, iov_order + PAGE_SHIFT); @@ -1764,7 +1763,7 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, sba_dev->num_ioc = num_ioc; for (i = 0; i < num_ioc; i++) { - unsigned long ioc_hpa = sba_dev->ioc[i].ioc_hpa; + void __iomem *ioc_hpa = sba_dev->ioc[i].ioc_hpa; unsigned int j; for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) { @@ -1776,7 +1775,8 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, * Improves netperf UDP_STREAM by ~10% for bcm5701. */ if (IS_PLUTO(sba_dev->iodc)) { - unsigned long rope_cfg, cfg_val; + void __iomem *rope_cfg; + unsigned long cfg_val; rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j; cfg_val = READ_REG(rope_cfg); @@ -1902,7 +1902,7 @@ sba_common_init(struct sba_device *sba_dev) * (bit #61, big endian), we have to flush and sync every time * IO-PDIR is changed in Ike/Astro. */ - if (boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC) { + if (ioc_needs_fdc) { printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n"); } else { printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n"); diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c index 828eb45062de..4ee26a6d9e25 100644 --- a/drivers/parisc/superio.c +++ b/drivers/parisc/superio.c @@ -271,7 +271,7 @@ superio_init(struct pci_dev *pcidev) else printk(KERN_ERR PFX "USB regulator not initialized!\n"); - if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT, + if (request_irq(pdev->irq, superio_interrupt, IRQF_DISABLED, SUPERIO, (void *)sio)) { printk(KERN_ERR PFX "could not get irq\n"); @@ -360,7 +360,7 @@ int superio_fixup_irq(struct pci_dev *pcidev) #endif for (i = 0; i < 16; i++) { - irq_desc[i].handler = &superio_interrupt_type; + irq_desc[i].chip = &superio_interrupt_type; } /* |
