summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/ethernet/sfc/efx.c207
-rw-r--r--drivers/net/ethernet/sfc/enum.h12
-rw-r--r--drivers/net/ethernet/sfc/net_driver.h1
-rw-r--r--drivers/net/ethernet/sfc/siena.c22
4 files changed, 216 insertions, 26 deletions
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 11a81084bec4..5e1ddc559b4f 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -21,7 +21,9 @@
#include <linux/ethtool.h>
#include <linux/topology.h>
#include <linux/gfp.h>
+#include <linux/pci.h>
#include <linux/cpu_rmap.h>
+#include <linux/aer.h>
#include "net_driver.h"
#include "efx.h"
#include "nic.h"
@@ -71,17 +73,19 @@ const char *const efx_loopback_mode_names[] = {
const unsigned int efx_reset_type_max = RESET_TYPE_MAX;
const char *const efx_reset_type_names[] = {
- [RESET_TYPE_INVISIBLE] = "INVISIBLE",
- [RESET_TYPE_ALL] = "ALL",
- [RESET_TYPE_WORLD] = "WORLD",
- [RESET_TYPE_DISABLE] = "DISABLE",
- [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
- [RESET_TYPE_INT_ERROR] = "INT_ERROR",
- [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY",
- [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH",
- [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH",
- [RESET_TYPE_TX_SKIP] = "TX_SKIP",
- [RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
+ [RESET_TYPE_INVISIBLE] = "INVISIBLE",
+ [RESET_TYPE_ALL] = "ALL",
+ [RESET_TYPE_RECOVER_OR_ALL] = "RECOVER_OR_ALL",
+ [RESET_TYPE_WORLD] = "WORLD",
+ [RESET_TYPE_RECOVER_OR_DISABLE] = "RECOVER_OR_DISABLE",
+ [RESET_TYPE_DISABLE] = "DISABLE",
+ [RESET_TYPE_TX_WATCHDOG] = "TX_WATCHDOG",
+ [RESET_TYPE_INT_ERROR] = "INT_ERROR",
+ [RESET_TYPE_RX_RECOVERY] = "RX_RECOVERY",
+ [RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH",
+ [RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH",
+ [RESET_TYPE_TX_SKIP] = "TX_SKIP",
+ [RESET_TYPE_MC_FAILURE] = "MC_FAILURE",
};
#define EFX_MAX_MTU (9 * 1024)
@@ -117,9 +121,12 @@ MODULE_PARM_DESC(separate_tx_channels,
static int napi_weight = 64;
/* This is the time (in jiffies) between invocations of the hardware
- * monitor. On Falcon-based NICs, this will:
+ * monitor.
+ * On Falcon-based NICs, this will:
* - Check the on-board hardware monitor;
* - Poll the link state and reconfigure the hardware as necessary.
+ * On Siena-based NICs for power systems with EEH support, this will give EEH a
+ * chance to start.
*/
static unsigned int efx_monitor_interval = 1 * HZ;
@@ -203,13 +210,14 @@ static void efx_stop_all(struct efx_nic *efx);
#define EFX_ASSERT_RESET_SERIALISED(efx) \
do { \
if ((efx->state == STATE_READY) || \
+ (efx->state == STATE_RECOVERY) || \
(efx->state == STATE_DISABLED)) \
ASSERT_RTNL(); \
} while (0)
static int efx_check_disabled(struct efx_nic *efx)
{
- if (efx->state == STATE_DISABLED) {
+ if (efx->state == STATE_DISABLED || efx->state == STATE_RECOVERY) {
netif_err(efx, drv, efx->net_dev,
"device is disabled due to earlier errors\n");
return -EIO;
@@ -677,7 +685,7 @@ static void efx_stop_datapath(struct efx_nic *efx)
BUG_ON(efx->port_enabled);
/* Only perform flush if dma is enabled */
- if (dev->is_busmaster) {
+ if (dev->is_busmaster && efx->state != STATE_RECOVERY) {
rc = efx_nic_flush_queues(efx);
if (rc && EFX_WORKAROUND_7803(efx)) {
@@ -1590,13 +1598,15 @@ static void efx_start_all(struct efx_nic *efx)
efx_start_port(efx);
efx_start_datapath(efx);
- /* Start the hardware monitor if there is one. Otherwise (we're link
- * event driven), we have to poll the PHY because after an event queue
- * flush, we could have a missed a link state change */
- if (efx->type->monitor != NULL) {
+ /* Start the hardware monitor if there is one */
+ if (efx->type->monitor != NULL)
queue_delayed_work(efx->workqueue, &efx->monitor_work,
efx_monitor_interval);
- } else {
+
+ /* If link state detection is normally event-driven, we have
+ * to poll now because we could have missed a change
+ */
+ if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) {
mutex_lock(&efx->mac_lock);
if (efx->phy_op->poll(efx))
efx_link_status_changed(efx);
@@ -2303,7 +2313,9 @@ int efx_reset(struct efx_nic *efx, enum reset_type method)
out:
/* Leave device stopped if necessary */
- disabled = rc || method == RESET_TYPE_DISABLE;
+ disabled = rc ||
+ method == RESET_TYPE_DISABLE ||
+ method == RESET_TYPE_RECOVER_OR_DISABLE;
rc2 = efx_reset_up(efx, method, !disabled);
if (rc2) {
disabled = true;
@@ -2322,13 +2334,48 @@ out:
return rc;
}
+/* Try recovery mechanisms.
+ * For now only EEH is supported.
+ * Returns 0 if the recovery mechanisms are unsuccessful.
+ * Returns a non-zero value otherwise.
+ */
+static int efx_try_recovery(struct efx_nic *efx)
+{
+#ifdef CONFIG_EEH
+ /* A PCI error can occur and not be seen by EEH because nothing
+ * happens on the PCI bus. In this case the driver may fail and
+ * schedule a 'recover or reset', leading to this recovery handler.
+ * Manually call the eeh failure check function.
+ */
+ struct eeh_dev *eehdev =
+ of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
+
+ if (eeh_dev_check_failure(eehdev)) {
+ /* The EEH mechanisms will handle the error and reset the
+ * device if necessary.
+ */
+ return 1;
+ }
+#endif
+ return 0;
+}
+
/* The worker thread exists so that code that cannot sleep can
* schedule a reset for later.
*/
static void efx_reset_work(struct work_struct *data)
{
struct efx_nic *efx = container_of(data, struct efx_nic, reset_work);
- unsigned long pending = ACCESS_ONCE(efx->reset_pending);
+ unsigned long pending;
+ enum reset_type method;
+
+ pending = ACCESS_ONCE(efx->reset_pending);
+ method = fls(pending) - 1;
+
+ if ((method == RESET_TYPE_RECOVER_OR_DISABLE ||
+ method == RESET_TYPE_RECOVER_OR_ALL) &&
+ efx_try_recovery(efx))
+ return;
if (!pending)
return;
@@ -2340,7 +2387,7 @@ static void efx_reset_work(struct work_struct *data)
* it cannot change again.
*/
if (efx->state == STATE_READY)
- (void)efx_reset(efx, fls(pending) - 1);
+ (void)efx_reset(efx, method);
rtnl_unlock();
}
@@ -2349,11 +2396,20 @@ void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
{
enum reset_type method;
+ if (efx->state == STATE_RECOVERY) {
+ netif_dbg(efx, drv, efx->net_dev,
+ "recovering: skip scheduling %s reset\n",
+ RESET_TYPE(type));
+ return;
+ }
+
switch (type) {
case RESET_TYPE_INVISIBLE:
case RESET_TYPE_ALL:
+ case RESET_TYPE_RECOVER_OR_ALL:
case RESET_TYPE_WORLD:
case RESET_TYPE_DISABLE:
+ case RESET_TYPE_RECOVER_OR_DISABLE:
method = type;
netif_dbg(efx, drv, efx->net_dev, "scheduling %s reset\n",
RESET_TYPE(method));
@@ -2563,6 +2619,8 @@ static void efx_pci_remove(struct pci_dev *pci_dev)
efx_fini_struct(efx);
pci_set_drvdata(pci_dev, NULL);
free_netdev(efx->net_dev);
+
+ pci_disable_pcie_error_reporting(pci_dev);
};
/* NIC VPD information
@@ -2735,6 +2793,11 @@ static int efx_pci_probe(struct pci_dev *pci_dev,
netif_warn(efx, probe, efx->net_dev,
"failed to create MTDs (%d)\n", rc);
+ rc = pci_enable_pcie_error_reporting(pci_dev);
+ if (rc && rc != -EINVAL)
+ netif_warn(efx, probe, efx->net_dev,
+ "pci_enable_pcie_error_reporting failed (%d)\n", rc);
+
return 0;
fail4:
@@ -2859,12 +2922,112 @@ static const struct dev_pm_ops efx_pm_ops = {
.restore = efx_pm_resume,
};
+/* A PCI error affecting this device was detected.
+ * At this point MMIO and DMA may be disabled.
+ * Stop the software path and request a slot reset.
+ */
+pci_ers_result_t efx_io_error_detected(struct pci_dev *pdev,
+ enum pci_channel_state state)
+{
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ rtnl_lock();
+
+ if (efx->state != STATE_DISABLED) {
+ efx->state = STATE_RECOVERY;
+ efx->reset_pending = 0;
+
+ efx_device_detach_sync(efx);
+
+ efx_stop_all(efx);
+ efx_stop_interrupts(efx, false);
+
+ status = PCI_ERS_RESULT_NEED_RESET;
+ } else {
+ /* If the interface is disabled we don't want to do anything
+ * with it.
+ */
+ status = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ rtnl_unlock();
+
+ pci_disable_device(pdev);
+
+ return status;
+}
+
+/* Fake a successfull reset, which will be performed later in efx_io_resume. */
+pci_ers_result_t efx_io_slot_reset(struct pci_dev *pdev)
+{
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
+ int rc;
+
+ if (pci_enable_device(pdev)) {
+ netif_err(efx, hw, efx->net_dev,
+ "Cannot re-enable PCI device after reset.\n");
+ status = PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ rc = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (rc) {
+ netif_err(efx, hw, efx->net_dev,
+ "pci_cleanup_aer_uncorrect_error_status failed (%d)\n", rc);
+ /* Non-fatal error. Continue. */
+ }
+
+ return status;
+}
+
+/* Perform the actual reset and resume I/O operations. */
+static void efx_io_resume(struct pci_dev *pdev)
+{
+ struct efx_nic *efx = pci_get_drvdata(pdev);
+ int rc;
+
+ rtnl_lock();
+
+ if (efx->state == STATE_DISABLED)
+ goto out;
+
+ rc = efx_reset(efx, RESET_TYPE_ALL);
+ if (rc) {
+ netif_err(efx, hw, efx->net_dev,
+ "efx_reset failed after PCI error (%d)\n", rc);
+ } else {
+ efx->state = STATE_READY;
+ netif_dbg(efx, hw, efx->net_dev,
+ "Done resetting and resuming IO after PCI error.\n");
+ }
+
+out:
+ rtnl_unlock();
+}
+
+/* For simplicity and reliability, we always require a slot reset and try to
+ * reset the hardware when a pci error affecting the device is detected.
+ * We leave both the link_reset and mmio_enabled callback unimplemented:
+ * with our request for slot reset the mmio_enabled callback will never be
+ * called, and the link_reset callback is not used by AER or EEH mechanisms.
+ */
+static struct pci_error_handlers efx_err_handlers = {
+ .error_detected = efx_io_error_detected,
+ .slot_reset = efx_io_slot_reset,
+ .resume = efx_io_resume,
+};
+
static struct pci_driver efx_pci_driver = {
.name = KBUILD_MODNAME,
.id_table = efx_pci_table,
.probe = efx_pci_probe,
.remove = efx_pci_remove,
.driver.pm = &efx_pm_ops,
+ .err_handler = &efx_err_handlers,
};
/**************************************************************************
diff --git a/drivers/net/ethernet/sfc/enum.h b/drivers/net/ethernet/sfc/enum.h
index 182dbe2cc6e4..ab8fb5889e55 100644
--- a/drivers/net/ethernet/sfc/enum.h
+++ b/drivers/net/ethernet/sfc/enum.h
@@ -137,8 +137,12 @@ enum efx_loopback_mode {
* Reset methods are numbered in order of increasing scope.
*
* @RESET_TYPE_INVISIBLE: Reset datapath and MAC (Falcon only)
+ * @RESET_TYPE_RECOVER_OR_ALL: Try to recover. Apply RESET_TYPE_ALL
+ * if unsuccessful.
* @RESET_TYPE_ALL: Reset datapath, MAC and PHY
* @RESET_TYPE_WORLD: Reset as much as possible
+ * @RESET_TYPE_RECOVER_OR_DISABLE: Try to recover. Apply RESET_TYPE_DISABLE if
+ * unsuccessful.
* @RESET_TYPE_DISABLE: Reset datapath, MAC and PHY; leave NIC disabled
* @RESET_TYPE_TX_WATCHDOG: reset due to TX watchdog
* @RESET_TYPE_INT_ERROR: reset due to internal error
@@ -150,9 +154,11 @@ enum efx_loopback_mode {
*/
enum reset_type {
RESET_TYPE_INVISIBLE = 0,
- RESET_TYPE_ALL = 1,
- RESET_TYPE_WORLD = 2,
- RESET_TYPE_DISABLE = 3,
+ RESET_TYPE_RECOVER_OR_ALL = 1,
+ RESET_TYPE_ALL = 2,
+ RESET_TYPE_WORLD = 3,
+ RESET_TYPE_RECOVER_OR_DISABLE = 4,
+ RESET_TYPE_DISABLE = 5,
RESET_TYPE_MAX_METHOD,
RESET_TYPE_TX_WATCHDOG,
RESET_TYPE_INT_ERROR,
diff --git a/drivers/net/ethernet/sfc/net_driver.h b/drivers/net/ethernet/sfc/net_driver.h
index c83fe090406d..9e900817d2ab 100644
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -429,6 +429,7 @@ enum nic_state {
STATE_UNINIT = 0, /* device being probed/removed or is frozen */
STATE_READY = 1, /* hardware ready and netdev registered */
STATE_DISABLED = 2, /* device disabled due to hardware errors */
+ STATE_RECOVERY = 3, /* device recovering from PCI error */
};
/*
diff --git a/drivers/net/ethernet/sfc/siena.c b/drivers/net/ethernet/sfc/siena.c
index ba40f67e4f05..e07ff0d3f26b 100644
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -202,7 +202,7 @@ out:
static enum reset_type siena_map_reset_reason(enum reset_type reason)
{
- return RESET_TYPE_ALL;
+ return RESET_TYPE_RECOVER_OR_ALL;
}
static int siena_map_reset_flags(u32 *flags)
@@ -245,6 +245,22 @@ static int siena_reset_hw(struct efx_nic *efx, enum reset_type method)
return efx_mcdi_reset_port(efx);
}
+#ifdef CONFIG_EEH
+/* When a PCI device is isolated from the bus, a subsequent MMIO read is
+ * required for the kernel EEH mechanisms to notice. As the Solarflare driver
+ * was written to minimise MMIO read (for latency) then a periodic call to check
+ * the EEH status of the device is required so that device recovery can happen
+ * in a timely fashion.
+ */
+static void siena_monitor(struct efx_nic *efx)
+{
+ struct eeh_dev *eehdev =
+ of_node_to_eeh_dev(pci_device_to_OF_node(efx->pci_dev));
+
+ eeh_dev_check_failure(eehdev);
+}
+#endif
+
static int siena_probe_nvconfig(struct efx_nic *efx)
{
u32 caps = 0;
@@ -665,7 +681,11 @@ const struct efx_nic_type siena_a0_nic_type = {
.init = siena_init_nic,
.dimension_resources = siena_dimension_resources,
.fini = efx_port_dummy_op_void,
+#ifdef CONFIG_EEH
+ .monitor = siena_monitor,
+#else
.monitor = NULL,
+#endif
.map_reset_reason = siena_map_reset_reason,
.map_reset_flags = siena_map_reset_flags,
.reset = siena_reset_hw,
OpenPOWER on IntegriCloud