diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 71 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/regs.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_82575.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_hwmon.c | 14 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 76 |
7 files changed, 98 insertions, 79 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index dff7bff8b8e0..121a865c7fbd 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -782,6 +782,59 @@ release: } /** + * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications + * preventing further DMA write requests. Workaround the issue by disabling + * the de-assertion of the clock request when in 1Gpbs mode. + **/ +static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) +{ + u32 fextnvm6 = er32(FEXTNVM6); + s32 ret_val = 0; + + if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { + u16 kmrn_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = + e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto release; + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg & + ~E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto release; + + usleep_range(10, 20); + + ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); +release: + hw->phy.ops.release(hw); + } else { + /* clear FEXTNVM6 bit 8 on link down or 10/100 */ + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Work-around I218 hang issue */ + if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + ret_val = e1000_k1_workaround_lpt_lp(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; @@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { - u16 phy_reg; + u16 phy_reg, device_id = hw->adapter->pdev->device; + + if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + u32 fextnvm6 = er32(FEXTNVM6); + + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index b6d3174d7d2d..8bf4655c2e17 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -92,6 +92,8 @@ #define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 +#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index 794fe1497666..a7e6a3e37257 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -42,6 +42,7 @@ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 84e7e0909def..b64542acfa34 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) switch (hw->phy.type) { case e1000_phy_i210: case e1000_phy_m88: - if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); - else + break; + default: ret_val = igb_copper_link_setup_m88(hw); + break; + } break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index d27edbc63923..25151401c2ab 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -447,7 +447,7 @@ struct igb_adapter { #endif struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; - struct igb_i2c_client_list *i2c_clients; + struct i2c_client *i2c_client; }; #define IGB_FLAG_HAS_MSI (1 << 0) diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 0a9b073d0b03..4623502054d5 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -39,6 +39,10 @@ #include <linux/pci.h> #ifdef CONFIG_IGB_HWMON +struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)), +}; + /* hwmon callback functions */ static ssize_t igb_hwmon_show_location(struct device *dev, struct device_attribute *attr, @@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter) unsigned int i; int n_attrs; int rc = 0; + struct i2c_client *client = NULL; /* If this method isn't defined we don't support thermals */ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) @@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter) if (rc) goto exit; + /* init i2c_client */ + client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info); + if (client == NULL) { + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); + goto exit; + } + adapter->i2c_client = client; + /* Allocation space for max attributes * max num sensors * values (loc, temp, max, caution) */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ed79a1c53b59..4dbd62968c7a 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } -static const struct i2c_board_info i350_sensor_info = { - I2C_BOARD_INFO("i350bb", 0Xf8), -}; - /* igb_init_i2c - Init I2C interface * @adapter: pointer to adapter structure * @@ -6227,13 +6223,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring, /* If we spanned a buffer we have a huge mess so test for it */ BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))); - /* Guarantee this function can be used by verifying buffer sizes */ - BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD + - NET_IP_ALIGN + - IGB_TS_HDR_LEN + - ETH_FRAME_LEN + - ETH_FCS_LEN)); - rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; page = rx_buffer->page; prefetchw(page); @@ -7724,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } -static DEFINE_SPINLOCK(i2c_clients_lock); - -/* igb_get_i2c_client - returns matching client - * in adapters's client list. - * @adapter: adapter struct - * @dev_addr: device address of i2c needed. - */ -static struct i2c_client * -igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) -{ - ulong flags; - struct igb_i2c_client_list *client_list; - struct i2c_client *client = NULL; - struct i2c_board_info client_info = { - I2C_BOARD_INFO("igb", 0x00), - }; - - spin_lock_irqsave(&i2c_clients_lock, flags); - client_list = adapter->i2c_clients; - - /* See if we already have an i2c_client */ - while (client_list) { - if (client_list->client->addr == (dev_addr >> 1)) { - client = client_list->client; - goto exit; - } else { - client_list = client_list->next; - } - } - - /* no client_list found, create a new one */ - client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC); - if (client_list == NULL) - goto exit; - - /* dev_addr passed to us is left-shifted by 1 bit - * i2c_new_device call expects it to be flush to the right. - */ - client_info.addr = dev_addr >> 1; - client_info.platform_data = adapter; - client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); - if (client_list->client == NULL) { - dev_info(&adapter->pdev->dev, - "Failed to create new i2c device..\n"); - goto err_no_client; - } - - /* insert new client at head of list */ - client_list->next = adapter->i2c_clients; - adapter->i2c_clients = client_list; - - client = client_list->client; - goto exit; - -err_no_client: - kfree(client_list); -exit: - spin_unlock_irqrestore(&i2c_clients_lock, flags); - return client; -} - /* igb_read_i2c_byte - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read @@ -7798,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = 0; @@ -7835,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = E1000_SWFW_PHY0_SM; |
