diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/smsc911x.c | 30 |
1 files changed, 22 insertions, 8 deletions
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 27d2d7c45519..6e175e5555a1 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1742,6 +1742,21 @@ static const struct net_device_ops smsc911x_netdev_ops = { #endif }; +/* copies the current mac address from hardware to dev->dev_addr */ +static void __devinit smsc911x_read_mac_address(struct net_device *dev) +{ + struct smsc911x_data *pdata = netdev_priv(dev); + u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); + u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); + + dev->dev_addr[0] = (u8)(mac_low32); + dev->dev_addr[1] = (u8)(mac_low32 >> 8); + dev->dev_addr[2] = (u8)(mac_low32 >> 16); + dev->dev_addr[3] = (u8)(mac_low32 >> 24); + dev->dev_addr[4] = (u8)(mac_high16); + dev->dev_addr[5] = (u8)(mac_high16 >> 8); +} + /* Initializing private device structures, only called from probe */ static int __devinit smsc911x_init(struct net_device *dev) { @@ -1829,6 +1844,12 @@ static int __devinit smsc911x_init(struct net_device *dev) SMSC_WARNING(PROBE, "This driver is not intended for this chip revision"); + /* workaround for platforms without an eeprom, where the mac address + * is stored elsewhere and set by the bootloader. This saves the + * mac address before resetting the device */ + if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) + smsc911x_read_mac_address(dev); + /* Reset the LAN911x */ if (smsc911x_soft_reset(pdata)) return -ENODEV; @@ -2009,14 +2030,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) } else { /* Try reading mac address from device. if EEPROM is present * it will already have been set */ - u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); - u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); - dev->dev_addr[0] = (u8)(mac_low32); - dev->dev_addr[1] = (u8)(mac_low32 >> 8); - dev->dev_addr[2] = (u8)(mac_low32 >> 16); - dev->dev_addr[3] = (u8)(mac_low32 >> 24); - dev->dev_addr[4] = (u8)(mac_high16); - dev->dev_addr[5] = (u8)(mac_high16 >> 8); + smsc911x_read_mac_address(dev); if (is_valid_ether_addr(dev->dev_addr)) { /* eeprom values are valid so use them */ |
