diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 18 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_sriov.c | 29 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 2 |
3 files changed, 46 insertions, 3 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index eca762d954c6..f0d0c5aad2b4 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3077,6 +3077,14 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, ixgbe_configure_srrctl(adapter, ring); ixgbe_configure_rscctl(adapter, ring); + /* If operating in IOV mode set RLPML for X540 */ + if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && + hw->mac.type == ixgbe_mac_X540) { + rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK; + rxdctl |= ((ring->netdev->mtu + ETH_HLEN + + ETH_FCS_LEN + VLAN_HLEN) | IXGBE_RXDCTL_RLPML_EN); + } + if (hw->mac.type == ixgbe_mac_82598EB) { /* * enable cache line friendly hardware writes: @@ -5441,8 +5449,14 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; /* MTU < 68 is an error and causes problems on some kernels */ - if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) - return -EINVAL; + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED && + hw->mac.type != ixgbe_mac_X540) { + if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) + return -EINVAL; + } else { + if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) + return -EINVAL; + } e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); /* must set new MTU before calling down or up */ diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c index 187b3a16ec1f..fb4868d0a32d 100644 --- a/drivers/net/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ixgbe/ixgbe_sriov.c @@ -110,6 +110,33 @@ static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add); } +void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf) +{ + struct ixgbe_hw *hw = &adapter->hw; + int new_mtu = msgbuf[1]; + u32 max_frs; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + /* Only X540 supports jumbo frames in IOV mode */ + if (adapter->hw.mac.type != ixgbe_mac_X540) + return; + + /* MTU < 68 is an error and causes problems on some kernels */ + if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) { + e_err(drv, "VF mtu %d out of range\n", new_mtu); + return; + } + + max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) & + IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT; + if (max_frs < new_mtu) { + max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs); + } + + e_info(hw, "VF requests change max MTU to %d\n", new_mtu); +} + static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) { u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); @@ -302,7 +329,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) hash_list, vf); break; case IXGBE_VF_SET_LPE: - WARN_ON((msgbuf[0] & 0xFFFF) == IXGBE_VF_SET_LPE); + ixgbe_set_vf_lpe(adapter, msgbuf); break; case IXGBE_VF_SET_VLAN: add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index fd3358f54139..ab65d13969fd 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1680,6 +1680,8 @@ #define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */ #define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */ #define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ +#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */ +#define IXGBE_RXDCTL_RLPML_EN 0x00008000 #define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ #define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ |
