summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/3c505.c2
-rw-r--r--drivers/net/8139too.c6
-rw-r--r--drivers/net/Kconfig54
-rwxr-xr-xdrivers/net/amd8111e.c2
-rw-r--r--drivers/net/cs89x0.c1
-rw-r--r--drivers/net/e1000/e1000_main.c29
-rw-r--r--drivers/net/eql.c16
-rw-r--r--drivers/net/ne.c4
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c2
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c7
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c11
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c2
-rw-r--r--drivers/net/plip.c29
-rw-r--r--drivers/net/tg3.c417
-rw-r--r--drivers/net/tg3.h15
-rw-r--r--drivers/net/via-velocity.h4
-rw-r--r--drivers/net/wan/sdla_fr.c7
-rw-r--r--drivers/net/wan/sdla_ft1.c3
-rw-r--r--drivers/net/wan/sdla_ppp.c3
-rw-r--r--drivers/net/wan/sdla_x25.c3
-rw-r--r--drivers/net/wan/wanpipe_multppp.c9
-rw-r--r--drivers/net/wireless/airo.c2
-rw-r--r--drivers/net/wireless/orinoco_cs.c2
23 files changed, 473 insertions, 157 deletions
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index ad17f17e8e7a..111601ca4ca3 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -272,7 +272,7 @@ static inline void set_hsf(struct net_device *dev, int hsf)
static int start_receive(struct net_device *, pcb_struct *);
-inline static void adapter_reset(struct net_device *dev)
+static inline void adapter_reset(struct net_device *dev)
{
unsigned long timeout;
elp_device *adapter = dev->priv;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 5a4a08a7c951..4c2cf7bbd252 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -126,14 +126,14 @@
#define USE_IO_OPS 1
#endif
-/* define to 1 to enable copious debugging info */
-#undef RTL8139_DEBUG
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
/* define to 1 to disable lightweight runtime debugging checks */
#undef RTL8139_NDEBUG
-#ifdef RTL8139_DEBUG
+#if RTL8139_DEBUG
/* note: prints function name for you */
# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
#else
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9a07ff7a7777..8a835eb58808 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -23,9 +23,12 @@ config NETDEVICES
If unsure, say Y.
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
config DUMMY
tristate "Dummy net driver support"
- depends on NETDEVICES
---help---
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
@@ -45,7 +48,6 @@ config DUMMY
config BONDING
tristate "Bonding driver support"
- depends on NETDEVICES
depends on INET
---help---
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
@@ -63,7 +65,6 @@ config BONDING
config EQUALIZER
tristate "EQL (serial line load balancing) support"
- depends on NETDEVICES
---help---
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
@@ -83,7 +84,6 @@ config EQUALIZER
config TUN
tristate "Universal TUN/TAP device driver support"
- depends on NETDEVICES
select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
@@ -107,7 +107,7 @@ config TUN
config NET_SB1000
tristate "General Instruments Surfboard 1000"
- depends on NETDEVICES && PNP
+ depends on PNP
---help---
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
@@ -129,16 +129,14 @@ config NET_SB1000
If you don't have this card, of course say N.
-if NETDEVICES
source "drivers/net/arcnet/Kconfig"
-endif
#
# Ethernet
#
menu "Ethernet (10 or 100Mbit)"
- depends on NETDEVICES && !UML
+ depends on !UML
config NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
@@ -1137,7 +1135,7 @@ config IBMLANA
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
- depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES
+ depends on NET_ETHERNET && PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
@@ -1760,7 +1758,7 @@ endmenu
#
menu "Ethernet (1000 Mbit)"
- depends on NETDEVICES && !UML
+ depends on !UML
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2091,7 +2089,7 @@ endmenu
#
menu "Ethernet (10000 Mbit)"
- depends on NETDEVICES && !UML
+ depends on !UML
config IXGB
tristate "Intel(R) PRO/10GbE support"
@@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig"
config ISERIES_VETH
tristate "iSeries Virtual Ethernet driver support"
- depends on NETDEVICES && PPC_ISERIES
+ depends on PPC_ISERIES
config FDDI
bool "FDDI driver support"
- depends on NETDEVICES && (PCI || EISA)
+ depends on (PCI || EISA)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2239,7 +2237,7 @@ config SKFP
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
- depends on NETDEVICES && EXPERIMENTAL && INET && PCI
+ depends on EXPERIMENTAL && INET && PCI
help
HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS
config PLIP
tristate "PLIP (parallel port) support"
- depends on NETDEVICES && PARPORT
+ depends on PARPORT
---help---
PLIP (Parallel Line Internet Protocol) is used to create a
reasonably fast mini network consisting of two (or, rarely, more)
@@ -2307,7 +2305,6 @@ config PLIP
config PPP
tristate "PPP (point-to-point protocol) support"
- depends on NETDEVICES
---help---
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
@@ -2443,7 +2440,6 @@ config PPPOATM
config SLIP
tristate "SLIP (serial line) support"
- depends on NETDEVICES
---help---
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
@@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6
config NET_FC
bool "Fibre Channel driver support"
- depends on NETDEVICES && SCSI && PCI
+ depends on SCSI && PCI
help
Fibre Channel is a high speed serial protocol mainly used to connect
large storage devices to the computer; it is compatible with and
@@ -2523,7 +2519,7 @@ config NET_FC
config SHAPER
tristate "Traffic Shaper (EXPERIMENTAL)"
- depends on NETDEVICES && EXPERIMENTAL
+ depends on EXPERIMENTAL
---help---
The traffic shaper is a virtual network device that allows you to
limit the rate of outgoing data flow over some other network device.
@@ -2544,9 +2540,27 @@ config SHAPER
config NETCONSOLE
tristate "Network console logging support (EXPERIMENTAL)"
- depends on NETDEVICES && EXPERIMENTAL
+ depends on EXPERIMENTAL
---help---
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
+endif #NETDEVICES
+
+config NETPOLL
+ def_bool NETCONSOLE
+
+config NETPOLL_RX
+ bool "Netpoll support for trapping incoming packets"
+ default n
+ depends on NETPOLL
+
+config NETPOLL_TRAP
+ bool "Netpoll traffic trapping"
+ default n
+ depends on NETPOLL
+
+config NET_POLL_CONTROLLER
+ def_bool NETPOLL
+
endmenu
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 8618012df06a..d9ba8be72af8 100755
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1290,7 +1290,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg
writel(intr0, mmio + INT0);
/* Check if Receive Interrupt has occurred. */
-#if CONFIG_AMD8111E_NAPI
+#ifdef CONFIG_AMD8111E_NAPI
if(intr0 & RINT0){
if(netif_rx_schedule_prep(dev)){
/* Disable receive interupts */
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index b96d6fb1929e..2c6dc24c3728 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1450,6 +1450,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
/* Write the contents of the packet */
outsw(dev->base_addr + TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
spin_unlock_irq(&lp->lock);
+ lp->stats.tx_bytes += skb->len;
dev->trans_start = jiffies;
dev_kfree_skb (skb);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cb7f051a60ad..5e5d2c3c7ce4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -162,7 +162,6 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
-static int e1000_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
static int e1000_suspend(struct pci_dev *pdev, uint32_t state);
#ifdef CONFIG_PM
static int e1000_resume(struct pci_dev *pdev);
@@ -173,12 +172,6 @@ static int e1000_resume(struct pci_dev *pdev);
static void e1000_netpoll (struct net_device *netdev);
#endif
-struct notifier_block e1000_notifier_reboot = {
- .notifier_call = e1000_notify_reboot,
- .next = NULL,
- .priority = 0
-};
-
/* Exported from other modules */
extern void e1000_check_options(struct e1000_adapter *adapter);
@@ -221,9 +214,7 @@ e1000_init_module(void)
printk(KERN_INFO "%s\n", e1000_copyright);
ret = pci_module_init(&e1000_driver);
- if(ret >= 0) {
- register_reboot_notifier(&e1000_notifier_reboot);
- }
+
return ret;
}
@@ -239,7 +230,6 @@ module_init(e1000_init_module);
static void __exit
e1000_exit_module(void)
{
- unregister_reboot_notifier(&e1000_notifier_reboot);
pci_unregister_driver(&e1000_driver);
}
@@ -3652,23 +3642,6 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
}
static int
-e1000_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
-{
- struct pci_dev *pdev = NULL;
-
- switch(event) {
- case SYS_DOWN:
- case SYS_HALT:
- case SYS_POWER_OFF:
- while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
- if(pci_dev_driver(pdev) == &e1000_driver)
- e1000_suspend(pdev, 3);
- }
- }
- return NOTIFY_DONE;
-}
-
-static int
e1000_suspend(struct pci_dev *pdev, uint32_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
diff --git a/drivers/net/eql.c b/drivers/net/eql.c
index dd6865820372..aa1569182fd6 100644
--- a/drivers/net/eql.c
+++ b/drivers/net/eql.c
@@ -132,7 +132,7 @@ static struct net_device_stats *eql_get_stats(struct net_device *dev);
#define eql_is_slave(dev) ((dev->flags & IFF_SLAVE) == IFF_SLAVE)
#define eql_is_master(dev) ((dev->flags & IFF_MASTER) == IFF_MASTER)
-static void eql_kill_one_slave(slave_t *slave);
+static void eql_kill_one_slave(slave_queue_t *queue, slave_t *slave);
static void eql_timer(unsigned long param)
{
@@ -149,7 +149,7 @@ static void eql_timer(unsigned long param)
if (slave->bytes_queued < 0)
slave->bytes_queued = 0;
} else {
- eql_kill_one_slave(slave);
+ eql_kill_one_slave(&eql->queue, slave);
}
}
@@ -214,9 +214,10 @@ static int eql_open(struct net_device *dev)
return 0;
}
-static void eql_kill_one_slave(slave_t *slave)
+static void eql_kill_one_slave(slave_queue_t *queue, slave_t *slave)
{
list_del(&slave->list);
+ queue->num_slaves--;
slave->dev->flags &= ~IFF_SLAVE;
dev_put(slave->dev);
kfree(slave);
@@ -232,8 +233,7 @@ static void eql_kill_slave_queue(slave_queue_t *queue)
list_for_each_safe(this, tmp, head) {
slave_t *s = list_entry(this, slave_t, list);
- eql_kill_one_slave(s);
- queue->num_slaves--;
+ eql_kill_one_slave(queue, s);
}
spin_unlock_bh(&queue->lock);
@@ -318,7 +318,7 @@ static slave_t *__eql_schedule_slaves(slave_queue_t *queue)
}
} else {
/* We found a dead slave, kill it. */
- eql_kill_one_slave(slave);
+ eql_kill_one_slave(queue, slave);
}
}
return best_slave;
@@ -393,7 +393,7 @@ static int __eql_insert_slave(slave_queue_t *queue, slave_t *slave)
duplicate_slave = __eql_find_slave_dev(queue, slave->dev);
if (duplicate_slave != 0)
- eql_kill_one_slave(duplicate_slave);
+ eql_kill_one_slave(queue, duplicate_slave);
list_add(&slave->list, &queue->all_slaves);
queue->num_slaves++;
@@ -471,7 +471,7 @@ static int eql_emancipate(struct net_device *master_dev, slaving_request_t __use
slave_dev);
if (slave) {
- eql_kill_one_slave(slave);
+ eql_kill_one_slave(&eql->queue, slave);
ret = 0;
}
}
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 6c57096aa2e1..d209a1556b2e 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -129,9 +129,9 @@ bad_clone_list[] __initdata = {
#define NESM_START_PG 0x40 /* First page of TX buffer */
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
-#ifdef CONFIG_PLAT_MAPPI
+#if defined(CONFIG_PLAT_MAPPI)
# define DCR_VAL 0x4b
-#elif CONFIG_PLAT_OAKS32R
+#elif defined(CONFIG_PLAT_OAKS32R)
# define DCR_VAL 0x48
#else
# define DCR_VAL 0x49
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index dbb941004ae9..980d7e5d66cb 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1671,7 +1671,7 @@ static void set_multicast_list(struct net_device *dev)
static struct pcmcia_device_id nmclan_ids[] = {
PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
- PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet", 0x0ebf1d60, 0x00b2e941),
+ PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index e1664aef3dfd..9f22d138e3ad 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1639,7 +1639,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
@@ -1683,7 +1683,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
- PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM", 0xbb7fbdd7, 0x5ba10d49),
PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
@@ -1719,6 +1718,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
+ PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
@@ -1737,6 +1737,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
+ PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
@@ -1753,7 +1754,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
- PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline ", 0x0733cc81, 0x5e07cfa0),
+ PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index fbc2f58ff688..d652e1eddb45 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -41,6 +41,7 @@
#include <linux/ioport.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
+#include <linux/jiffies.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
@@ -2092,7 +2093,7 @@ static void media_check(u_long arg)
}
/* Ignore collisions unless we've had no rx's recently */
- if (jiffies - dev->last_rx > HZ) {
+ if (time_after(jiffies, dev->last_rx + HZ)) {
if (smc->tx_err || (smc->media_status & EPH_16COL))
media |= EPH_16COL;
}
@@ -2331,8 +2332,8 @@ static struct pcmcia_device_id smc91c92_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
@@ -2342,8 +2343,8 @@ static struct pcmcia_device_id smc91c92_ids[] = {
PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
- PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
- PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+ PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
+ PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 9f33bad174e9..ce143f08638a 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1985,7 +1985,7 @@ static struct pcmcia_device_id xirc2ps_ids[] = {
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 21537ee3a6a7..1bd22cd40c75 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -160,7 +160,7 @@ static struct net_device_stats *plip_get_stats(struct net_device *dev);
static int plip_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
static int plip_preempt(void *handle);
static void plip_wakeup(void *handle);
-
+
enum plip_connection_state {
PLIP_CN_NONE=0,
PLIP_CN_RECEIVE,
@@ -231,8 +231,8 @@ struct net_local {
atomic_t kill_timer;
struct semaphore killed_timer_sem;
};
-
-inline static void enable_parport_interrupts (struct net_device *dev)
+
+static inline void enable_parport_interrupts (struct net_device *dev)
{
if (dev->irq != -1)
{
@@ -242,7 +242,7 @@ inline static void enable_parport_interrupts (struct net_device *dev)
}
}
-inline static void disable_parport_interrupts (struct net_device *dev)
+static inline void disable_parport_interrupts (struct net_device *dev)
{
if (dev->irq != -1)
{
@@ -252,7 +252,7 @@ inline static void disable_parport_interrupts (struct net_device *dev)
}
}
-inline static void write_data (struct net_device *dev, unsigned char data)
+static inline void write_data (struct net_device *dev, unsigned char data)
{
struct parport *port =
((struct net_local *)dev->priv)->pardev->port;
@@ -260,14 +260,14 @@ inline static void write_data (struct net_device *dev, unsigned char data)
port->ops->write_data (port, data);
}
-inline static unsigned char read_status (struct net_device *dev)
+static inline unsigned char read_status (struct net_device *dev)
{
struct parport *port =
((struct net_local *)dev->priv)->pardev->port;
return port->ops->read_status (port);
}
-
+
/* Entry point of PLIP driver.
Probe the hardware, and register/initialize the driver.
@@ -316,7 +316,7 @@ plip_init_netdev(struct net_device *dev)
spin_lock_init(&nl->lock);
}
-
+
/* Bottom half handler for the delayed request.
This routine is kicked by do_timer().
Request `plip_bh' to be invoked. */
@@ -471,7 +471,7 @@ plip_bh_timeout_error(struct net_device *dev, struct net_local *nl,
return TIMEOUT;
}
-
+
static int
plip_none(struct net_device *dev, struct net_local *nl,
struct plip_local *snd, struct plip_local *rcv)
@@ -481,7 +481,7 @@ plip_none(struct net_device *dev, struct net_local *nl,
/* PLIP_RECEIVE --- receive a byte(two nibbles)
Returns OK on success, TIMEOUT on timeout */
-inline static int
+static inline int
plip_receive(unsigned short nibble_timeout, struct net_device *dev,
enum plip_nibble_state *ns_p, unsigned char *data_p)
{
@@ -582,7 +582,6 @@ static __be16 plip_type_trans(struct sk_buff *skb, struct net_device *dev)
return htons(ETH_P_802_2);
}
-
/* PLIP_RECEIVE_PACKET --- receive a packet */
static int
plip_receive_packet(struct net_device *dev, struct net_local *nl,
@@ -702,7 +701,7 @@ plip_receive_packet(struct net_device *dev, struct net_local *nl,
/* PLIP_SEND --- send a byte (two nibbles)
Returns OK on success, TIMEOUT when timeout */
-inline static int
+static inline int
plip_send(unsigned short nibble_timeout, struct net_device *dev,
enum plip_nibble_state *ns_p, unsigned char data)
{
@@ -902,7 +901,7 @@ plip_error(struct net_device *dev, struct net_local *nl,
return OK;
}
-
+
/* Handle the parallel port interrupts. */
static void
plip_interrupt(int irq, void *dev_id, struct pt_regs * regs)
@@ -957,7 +956,7 @@ plip_interrupt(int irq, void *dev_id, struct pt_regs * regs)
spin_unlock_irq(&nl->lock);
}
-
+
static int
plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
{
@@ -1238,7 +1237,7 @@ plip_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
}
return 0;
}
-
+
static int parport[PLIP_MAX] = { [0 ... PLIP_MAX-1] = -1 };
static int timid;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 54640686e983..201a550f0bcc 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.33"
-#define DRV_MODULE_RELDATE "July 5, 2005"
+#define DRV_MODULE_VERSION "3.34"
+#define DRV_MODULE_RELDATE "July 25, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -90,7 +90,7 @@
/* hardware minimum and maximum for a single frame's data payload */
#define TG3_MIN_MTU 60
#define TG3_MAX_MTU(tp) \
- (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ? 9000 : 1500)
+ ((tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) ? 9000 : 1500)
/* These numbers seem to be hard coded in the NIC firmware somehow.
* You can't change the ring sizes, but you can change where you place
@@ -221,6 +221,10 @@ static struct pci_device_id tg3_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753F,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
+ { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5781,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX,
@@ -508,6 +512,9 @@ static void tg3_switch_clocks(struct tg3 *tp)
u32 clock_ctrl = tr32(TG3PCI_CLOCK_CTRL);
u32 orig_clock_ctrl;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ return;
+
orig_clock_ctrl = clock_ctrl;
clock_ctrl &= (CLOCK_CTRL_FORCE_CLKRUN |
CLOCK_CTRL_CLKRUN_OENABLE |
@@ -907,7 +914,7 @@ out:
if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
/* Cannot do read-modify-write on 5401 */
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
- } else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ } else if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
u32 phy_reg;
/* Set bit 14 with read-modify-write to preserve other bits */
@@ -919,7 +926,7 @@ out:
/* Set phy register 0x10 bit 0 to high fifo elasticity to support
* jumbo frames transmission.
*/
- if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
+ if (tp->tg3_flags2 & TG3_FLG2_JUMBO_CAPABLE) {
u32 phy_reg;
if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, &phy_reg))
@@ -1093,7 +1100,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
tp->link_config.orig_autoneg = tp->link_config.autoneg;
}
- if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
+ if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
tp->link_config.speed = SPEED_10;
tp->link_config.duplex = DUPLEX_HALF;
tp->link_config.autoneg = AUTONEG_ENABLE;
@@ -1145,6 +1152,8 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
CLOCK_CTRL_ALTCLK |
CLOCK_CTRL_PWRDOWN_PLL133);
udelay(40);
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ /* do nothing */
} else if (!((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))) {
u32 newbits1, newbits2;
@@ -1238,6 +1247,25 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv
u32 old_tx_mode = tp->tx_mode;
if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) {
+
+ /* Convert 1000BaseX flow control bits to 1000BaseT
+ * bits before resolving flow control.
+ */
+ if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
+ local_adv &= ~(ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ remote_adv &= ~(LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
+
+ if (local_adv & ADVERTISE_1000XPAUSE)
+ local_adv |= ADVERTISE_PAUSE_CAP;
+ if (local_adv & ADVERTISE_1000XPSE_ASYM)
+ local_adv |= ADVERTISE_PAUSE_ASYM;
+ if (remote_adv & LPA_1000XPAUSE)
+ remote_adv |= LPA_PAUSE_CAP;
+ if (remote_adv & LPA_1000XPAUSE_ASYM)
+ remote_adv |= LPA_PAUSE_ASYM;
+ }
+
if (local_adv & ADVERTISE_PAUSE_CAP) {
if (local_adv & ADVERTISE_PAUSE_ASYM) {
if (remote_adv & LPA_PAUSE_CAP)
@@ -2498,12 +2526,226 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
return 0;
}
+static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
+{
+ int current_link_up, err = 0;
+ u32 bmsr, bmcr;
+ u16 current_speed;
+ u8 current_duplex;
+
+ tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+ tw32_f(MAC_MODE, tp->mac_mode);
+ udelay(40);
+
+ tw32(MAC_EVENT, 0);
+
+ tw32_f(MAC_STATUS,
+ (MAC_STATUS_SYNC_CHANGED |
+ MAC_STATUS_CFG_CHANGED |
+ MAC_STATUS_MI_COMPLETION |
+ MAC_STATUS_LNKSTATE_CHANGED));
+ udelay(40);
+
+ if (force_reset)
+ tg3_phy_reset(tp);
+
+ current_link_up = 0;
+ current_speed = SPEED_INVALID;
+ current_duplex = DUPLEX_INVALID;
+
+ err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+ err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+
+ err |= tg3_readphy(tp, MII_BMCR, &bmcr);
+
+ if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
+ (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
+ /* do nothing, just check for link up at the end */
+ } else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
+ u32 adv, new_adv;
+
+ err |= tg3_readphy(tp, MII_ADVERTISE, &adv);
+ new_adv = adv & ~(ADVERTISE_1000XFULL | ADVERTISE_1000XHALF |
+ ADVERTISE_1000XPAUSE |
+ ADVERTISE_1000XPSE_ASYM |
+ ADVERTISE_SLCT);
+
+ /* Always advertise symmetric PAUSE just like copper */
+ new_adv |= ADVERTISE_1000XPAUSE;
+
+ if (tp->link_config.advertising & ADVERTISED_1000baseT_Half)
+ new_adv |= ADVERTISE_1000XHALF;
+ if (tp->link_config.advertising & ADVERTISED_1000baseT_Full)
+ new_adv |= ADVERTISE_1000XFULL;
+
+ if ((new_adv != adv) || !(bmcr & BMCR_ANENABLE)) {
+ tg3_writephy(tp, MII_ADVERTISE, new_adv);
+ bmcr |= BMCR_ANENABLE | BMCR_ANRESTART;
+ tg3_writephy(tp, MII_BMCR, bmcr);
+
+ tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
+ tp->tg3_flags2 |= TG3_FLG2_PHY_JUST_INITTED;
+ tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+
+ return err;
+ }
+ } else {
+ u32 new_bmcr;
+
+ bmcr &= ~BMCR_SPEED1000;
+ new_bmcr = bmcr & ~(BMCR_ANENABLE | BMCR_FULLDPLX);
+
+ if (tp->link_config.duplex == DUPLEX_FULL)
+ new_bmcr |= BMCR_FULLDPLX;
+
+ if (new_bmcr != bmcr) {
+ /* BMCR_SPEED1000 is a reserved bit that needs
+ * to be set on write.
+ */
+ new_bmcr |= BMCR_SPEED1000;
+
+ /* Force a linkdown */
+ if (netif_carrier_ok(tp->dev)) {
+ u32 adv;
+
+ err |= tg3_readphy(tp, MII_ADVERTISE, &adv);
+ adv &= ~(ADVERTISE_1000XFULL |
+ ADVERTISE_1000XHALF |
+ ADVERTISE_SLCT);
+ tg3_writephy(tp, MII_ADVERTISE, adv);
+ tg3_writephy(tp, MII_BMCR, bmcr |
+ BMCR_ANRESTART |
+ BMCR_ANENABLE);
+ udelay(10);
+ netif_carrier_off(tp->dev);
+ }
+ tg3_writephy(tp, MII_BMCR, new_bmcr);
+ bmcr = new_bmcr;
+ err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+ err |= tg3_readphy(tp, MII_BMSR, &bmsr);
+ tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+ }
+ }
+
+ if (bmsr & BMSR_LSTATUS) {
+ current_speed = SPEED_1000;
+ current_link_up = 1;
+ if (bmcr & BMCR_FULLDPLX)
+ current_duplex = DUPLEX_FULL;
+ else
+ current_duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_ANENABLE) {
+ u32 local_adv, remote_adv, common;
+
+ err |= tg3_readphy(tp, MII_ADVERTISE, &local_adv);
+ err |= tg3_readphy(tp, MII_LPA, &remote_adv);
+ common = local_adv & remote_adv;
+ if (common & (ADVERTISE_1000XHALF |
+ ADVERTISE_1000XFULL)) {
+ if (common & ADVERTISE_1000XFULL)
+ current_duplex = DUPLEX_FULL;
+ else
+ current_duplex = DUPLEX_HALF;
+
+ tg3_setup_flow_control(tp, local_adv,
+ remote_adv);
+ }
+ else
+ current_link_up = 0;
+ }
+ }
+
+ tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
+ if (tp->link_config.active_duplex == DUPLEX_HALF)
+ tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
+
+ tw32_f(MAC_MODE, tp->mac_mode);
+ udelay(40);
+
+ tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED);
+
+ tp->link_config.active_speed = current_speed;
+ tp->link_config.active_duplex = current_duplex;
+
+ if (current_link_up != netif_carrier_ok(tp->dev)) {
+ if (current_link_up)
+ netif_carrier_on(tp->dev);
+ else {
+ netif_carrier_off(tp->dev);
+ tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+ }
+ tg3_link_report(tp);
+ }
+ return err;
+}
+
+static void tg3_serdes_parallel_detect(struct tg3 *tp)
+{
+ if (tp->tg3_flags2 & TG3_FLG2_PHY_JUST_INITTED) {
+ /* Give autoneg time to complete. */
+ tp->tg3_flags2 &= ~TG3_FLG2_PHY_JUST_INITTED;
+ return;
+ }
+ if (!netif_carrier_ok(tp->dev) &&
+ (tp->link_config.autoneg == AUTONEG_ENABLE)) {
+ u32 bmcr;
+
+ tg3_readphy(tp, MII_BMCR, &bmcr);
+ if (bmcr & BMCR_ANENABLE) {
+ u32 phy1, phy2;
+
+ /* Select shadow register 0x1f */
+ tg3_writephy(tp, 0x1c, 0x7c00);
+ tg3_readphy(tp, 0x1c, &phy1);
+
+ /* Select expansion interrupt status register */
+ tg3_writephy(tp, 0x17, 0x0f01);
+ tg3_readphy(tp, 0x15, &phy2);
+ tg3_readphy(tp, 0x15, &phy2);
+
+ if ((phy1 & 0x10) && !(phy2 & 0x20)) {
+ /* We have signal detect and not receiving
+ * config code words, link is up by parallel
+ * detection.
+ */
+
+ bmcr &= ~BMCR_ANENABLE;
+ bmcr |= BMCR_SPEED1000 | BMCR_FULLDPLX;
+ tg3_writephy(tp, MII_BMCR, bmcr);
+ tp->tg3_flags2 |= TG3_FLG2_PARALLEL_DETECT;
+ }
+ }
+ }
+ else if (netif_carrier_ok(tp->dev) &&
+ (tp->link_config.autoneg == AUTONEG_ENABLE) &&
+ (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
+ u32 phy2;
+
+ /* Select expansion interrupt status register */
+ tg3_writephy(tp, 0x17, 0x0f01);
+ tg3_readphy(tp, 0x15, &phy2);
+ if (phy2 & 0x20) {
+ u32 bmcr;
+
+ /* Config code words received, turn on autoneg. */
+ tg3_readphy(tp, MII_BMCR, &bmcr);
+ tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANENABLE);
+
+ tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT;
+
+ }
+ }
+}
+
static int tg3_setup_phy(struct tg3 *tp, int force_reset)
{
int err;
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
err = tg3_setup_fiber_phy(tp, force_reset);
+ } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
+ err = tg3_setup_fiber_mii_phy(tp, force_reset);
} else {
err = tg3_setup_copper_phy(tp, force_reset);
}
@@ -2612,7 +2854,7 @@ static int tg3_alloc_rx_skb(struct tg3 *tp, u32 opaque_key,
map = &tp->rx_std_buffers[dest_idx];
if (src_idx >= 0)
src_map = &tp->rx_std_buffers[src_idx];
- skb_size = RX_PKT_BUF_SZ;
+ skb_size = tp->rx_pkt_buf_sz;
break;
case RXD_OPAQUE_RING_JUMBO:
@@ -3434,10 +3676,18 @@ static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
{
dev->mtu = new_mtu;
- if (new_mtu > ETH_DATA_LEN)
- tp->tg3_flags |= TG3_FLAG_JUMBO_ENABLE;
- else
- tp->tg3_flags &= ~TG3_FLAG_JUMBO_ENABLE;
+ if (new_mtu > ETH_DATA_LEN) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
+ ethtool_op_set_tso(dev, 0);
+ }
+ else
+ tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
+ } else {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+ tp->tg3_flags &= ~TG3_FLAG_JUMBO_RING_ENABLE;
+ }
}
static int tg3_change_mtu(struct net_device *dev, int new_mtu)
@@ -3491,7 +3741,7 @@ static void tg3_free_rings(struct tg3 *tp)
continue;
pci_unmap_single(tp->pdev,
pci_unmap_addr(rxp, mapping),
- RX_PKT_BUF_SZ - tp->rx_offset,
+ tp->rx_pkt_buf_sz - tp->rx_offset,
PCI_DMA_FROMDEVICE);
dev_kfree_skb_any(rxp->skb);
rxp->skb = NULL;
@@ -3564,6 +3814,11 @@ static void tg3_init_rings(struct tg3 *tp)
memset(tp->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
memset(tp->tx_ring, 0, TG3_TX_RING_BYTES);
+ tp->rx_pkt_buf_sz = RX_PKT_BUF_SZ;
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) &&
+ (tp->dev->mtu > ETH_DATA_LEN))
+ tp->rx_pkt_buf_sz = RX_JUMBO_PKT_BUF_SZ;
+
/* Initialize invariants of the rings, we only set this
* stuff once. This works because the card does not
* write into the rx buffer posting rings.
@@ -3572,14 +3827,14 @@ static void tg3_init_rings(struct tg3 *tp)
struct tg3_rx_buffer_desc *rxd;
rxd = &tp->rx_std[i];
- rxd->idx_len = (RX_PKT_BUF_SZ - tp->rx_offset - 64)
+ rxd->idx_len = (tp->rx_pkt_buf_sz - tp->rx_offset - 64)
<< RXD_LEN_SHIFT;
rxd->type_flags = (RXD_FLAG_END << RXD_FLAGS_SHIFT);
rxd->opaque = (RXD_OPAQUE_RING_STD |
(i << RXD_OPAQUE_INDEX_SHIFT));
}
- if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
struct tg3_rx_buffer_desc *rxd;
@@ -3600,7 +3855,7 @@ static void tg3_init_rings(struct tg3 *tp)
break;
}
- if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
for (i = 0; i < tp->rx_jumbo_pending; i++) {
if (tg3_alloc_rx_skb(tp, RXD_OPAQUE_RING_JUMBO,
-1, i) < 0)
@@ -4056,7 +4311,30 @@ static int tg3_chip_reset(struct tg3 *tp)
val &= ~PCIX_CAPS_RELAXED_ORDERING;
pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
- tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ u32 val;
+
+ /* Chip reset on 5780 will reset MSI enable bit,
+ * so need to restore it.
+ */
+ if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) {
+ u16 ctrl;
+
+ pci_read_config_word(tp->pdev,
+ tp->msi_cap + PCI_MSI_FLAGS,
+ &ctrl);
+ pci_write_config_word(tp->pdev,
+ tp->msi_cap + PCI_MSI_FLAGS,
+ ctrl | PCI_MSI_FLAGS_ENABLE);
+ val = tr32(MSGINT_MODE);
+ tw32(MSGINT_MODE, val | MSGINT_MODE_ENABLE);
+ }
+
+ val = tr32(MEMARB_MODE);
+ tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
+
+ } else
+ tw32(MEMARB_MODE, MEMARB_MODE_ENABLE);
if (tp->pci_chip_rev_id == CHIPREV_ID_5750_A3) {
tg3_stop_fw(tp);
@@ -4082,6 +4360,9 @@ static int tg3_chip_reset(struct tg3 *tp)
if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) {
tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
tw32_f(MAC_MODE, tp->mac_mode);
+ } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
+ tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
+ tw32_f(MAC_MODE, tp->mac_mode);
} else
tw32_f(MAC_MODE, 0);
udelay(40);
@@ -5245,7 +5526,7 @@ static int tg3_reset_hw(struct tg3 *tp)
}
#endif
- if (!(tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE)) {
+ if (tp->dev->mtu <= ETH_DATA_LEN) {
tw32(BUFMGR_MB_RDMA_LOW_WATER,
tp->bufmgr_config.mbuf_read_dma_low_water);
tw32(BUFMGR_MB_MACRX_LOW_WATER,
@@ -5320,7 +5601,7 @@ static int tg3_reset_hw(struct tg3 *tp)
/* Setup replenish threshold. */
tw32(RCVBDI_JUMBO_THRESH, tp->rx_jumbo_pending / 8);
- if (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) {
+ if (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) {
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_HIGH,
((u64) tp->rx_jumbo_mapping >> 32));
tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
@@ -5381,7 +5662,7 @@ static int tg3_reset_hw(struct tg3 *tp)
tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
tp->rx_std_ptr);
- tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_ENABLE) ?
+ tp->rx_jumbo_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
tp->rx_jumbo_pending : 0;
tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
tp->rx_jumbo_ptr);
@@ -5683,7 +5964,8 @@ static int tg3_reset_hw(struct tg3 *tp)
tw32(MAC_RCV_RULE_1, 0x86000004 & RCV_RULE_DISABLE_MASK);
tw32(MAC_RCV_VALUE_1, 0xffffffff & RCV_RULE_DISABLE_MASK);
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)
+ if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+ (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780))
limit = 8;
else
limit = 16;
@@ -5865,7 +6147,8 @@ static void tg3_timer(unsigned long __opaque)
udelay(40);
tg3_setup_phy(tp, 0);
}
- }
+ } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+ tg3_serdes_parallel_detect(tp);
tp->timer_counter = tp->timer_multiplier;
}
@@ -8569,8 +8852,12 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
eeprom_phy_id = 0;
tp->phy_id = eeprom_phy_id;
- if (eeprom_phy_serdes)
- tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+ if (eeprom_phy_serdes) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ tp->tg3_flags2 |= TG3_FLG2_MII_SERDES;
+ else
+ tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+ }
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
led_cfg = cfg2 & (NIC_SRAM_DATA_CFG_LED_MODE_MASK |
@@ -8705,7 +8992,7 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
}
}
- if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
+ if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) &&
!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
u32 bmsr, adv_reg, tg3_ctrl;
@@ -8758,7 +9045,7 @@ skip_phy_reset:
err = tg3_init_5401phy_dsp(tp);
}
- if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
+ if (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)
tp->link_config.advertising =
(ADVERTISED_1000baseT_Half |
ADVERTISED_1000baseT_Full |
@@ -8928,6 +9215,10 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW)
tp->pci_chip_rev_id = CHIPREV_ID_5752_A0;
+ /* Find msi capability. */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
+ tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
+
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
MISC_HOST_CTRL_CHIPREV);
@@ -8943,7 +9234,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->pci_bist = (cacheline_sz_reg >> 24) & 0xff;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
@@ -8953,6 +9245,11 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
tp->tg3_flags2 |= TG3_FLG2_HW_TSO;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752)
+ tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
+
if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0)
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
@@ -9079,8 +9376,9 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
/* Derive initial jumbo mode from MTU assigned in
* ether_setup() via the alloc_etherdev() call
*/
- if (tp->dev->mtu > ETH_DATA_LEN)
- tp->tg3_flags |= TG3_FLAG_JUMBO_ENABLE;
+ if (tp->dev->mtu > ETH_DATA_LEN &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780)
+ tp->tg3_flags |= TG3_FLAG_JUMBO_RING_ENABLE;
/* Determine WakeOnLan speed to use. */
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
@@ -9096,7 +9394,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) ||
((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) &&
(tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) &&
- (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)))
+ (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) ||
+ (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED;
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5703_AX ||
@@ -9305,8 +9604,9 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
#endif
mac_offset = 0x7c;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
- !(tp->tg3_flags & TG3_FLG2_SUN_570X)) {
+ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
+ !(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
mac_offset = 0xcc;
if (tg3_nvram_lock(tp))
@@ -9620,6 +9920,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
/* Set bit 23 to enable PCIX hw bug fix */
tp->dma_rwctrl |= 0x009f0000;
+ } else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780) {
+ /* 5780 always in PCIX mode */
+ tp->dma_rwctrl |= 0x00144000;
} else {
tp->dma_rwctrl |= 0x001b000f;
}
@@ -9773,19 +10076,35 @@ static void __devinit tg3_init_link_config(struct tg3 *tp)
static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
{
- tp->bufmgr_config.mbuf_read_dma_low_water =
- DEFAULT_MB_RDMA_LOW_WATER;
- tp->bufmgr_config.mbuf_mac_rx_low_water =
- DEFAULT_MB_MACRX_LOW_WATER;
- tp->bufmgr_config.mbuf_high_water =
- DEFAULT_MB_HIGH_WATER;
+ if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+ tp->bufmgr_config.mbuf_read_dma_low_water =
+ DEFAULT_MB_RDMA_LOW_WATER_5705;
+ tp->bufmgr_config.mbuf_mac_rx_low_water =
+ DEFAULT_MB_MACRX_LOW_WATER_5705;
+ tp->bufmgr_config.mbuf_high_water =
+ DEFAULT_MB_HIGH_WATER_5705;
+
+ tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
+ DEFAULT_MB_RDMA_LOW_WATER_JUMBO_5780;
+ tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
+ DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780;
+ tp->bufmgr_config.mbuf_high_water_jumbo =
+ DEFAULT_MB_HIGH_WATER_JUMBO_5780;
+ } else {
+ tp->bufmgr_config.mbuf_read_dma_low_water =
+ DEFAULT_MB_RDMA_LOW_WATER;
+ tp->bufmgr_config.mbuf_mac_rx_low_water =
+ DEFAULT_MB_MACRX_LOW_WATER;
+ tp->bufmgr_config.mbuf_high_water =
+ DEFAULT_MB_HIGH_WATER;
- tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
- DEFAULT_MB_RDMA_LOW_WATER_JUMBO;
- tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
- DEFAULT_MB_MACRX_LOW_WATER_JUMBO;
- tp->bufmgr_config.mbuf_high_water_jumbo =
- DEFAULT_MB_HIGH_WATER_JUMBO;
+ tp->bufmgr_config.mbuf_read_dma_low_water_jumbo =
+ DEFAULT_MB_RDMA_LOW_WATER_JUMBO;
+ tp->bufmgr_config.mbuf_mac_rx_low_water_jumbo =
+ DEFAULT_MB_MACRX_LOW_WATER_JUMBO;
+ tp->bufmgr_config.mbuf_high_water_jumbo =
+ DEFAULT_MB_HIGH_WATER_JUMBO;
+ }
tp->bufmgr_config.dma_low_water = DEFAULT_DMA_LOW_WATER;
tp->bufmgr_config.dma_high_water = DEFAULT_DMA_HIGH_WATER;
@@ -9803,6 +10122,7 @@ static char * __devinit tg3_phy_string(struct tg3 *tp)
case PHY_ID_BCM5705: return "5705";
case PHY_ID_BCM5750: return "5750";
case PHY_ID_BCM5752: return "5752";
+ case PHY_ID_BCM5780: return "5780";
case PHY_ID_BCM8002: return "8002/serdes";
case 0: return "serdes";
default: return "unknown";
@@ -9998,8 +10318,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tg3_init_link_config(tp);
- tg3_init_bufmgr_config(tp);
-
tp->rx_pending = TG3_DEF_RX_RING_PENDING;
tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
tp->tx_pending = TG3_DEF_TX_RING_PENDING;
@@ -10028,14 +10346,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
goto err_out_iounmap;
}
- if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
- tp->bufmgr_config.mbuf_read_dma_low_water =
- DEFAULT_MB_RDMA_LOW_WATER_5705;
- tp->bufmgr_config.mbuf_mac_rx_low_water =
- DEFAULT_MB_MACRX_LOW_WATER_5705;
- tp->bufmgr_config.mbuf_high_water =
- DEFAULT_MB_HIGH_WATER_5705;
- }
+ tg3_init_bufmgr_config(tp);
#if TG3_TSO_SUPPORT != 0
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 70ad450733e6..5c4433c147fa 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -136,6 +136,7 @@
#define ASIC_REV_5705 0x03
#define ASIC_REV_5750 0x04
#define ASIC_REV_5752 0x06
+#define ASIC_REV_5780 0x08
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
@@ -984,14 +985,17 @@
#define DEFAULT_MB_RDMA_LOW_WATER 0x00000050
#define DEFAULT_MB_RDMA_LOW_WATER_5705 0x00000000
#define DEFAULT_MB_RDMA_LOW_WATER_JUMBO 0x00000130
+#define DEFAULT_MB_RDMA_LOW_WATER_JUMBO_5780 0x00000000
#define BUFMGR_MB_MACRX_LOW_WATER 0x00004414
#define DEFAULT_MB_MACRX_LOW_WATER 0x00000020
#define DEFAULT_MB_MACRX_LOW_WATER_5705 0x00000010
#define DEFAULT_MB_MACRX_LOW_WATER_JUMBO 0x00000098
+#define DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780 0x0000004b
#define BUFMGR_MB_HIGH_WATER 0x00004418
#define DEFAULT_MB_HIGH_WATER 0x00000060
#define DEFAULT_MB_HIGH_WATER_5705 0x00000060
#define DEFAULT_MB_HIGH_WATER_JUMBO 0x0000017c
+#define DEFAULT_MB_HIGH_WATER_JUMBO_5780 0x00000096
#define BUFMGR_RX_MB_ALLOC_REQ 0x0000441c
#define BUFMGR_MB_ALLOC_BIT 0x10000000
#define BUFMGR_RX_MB_ALLOC_RESP 0x00004420
@@ -2087,6 +2091,8 @@ struct tg3 {
struct tg3_rx_buffer_desc *rx_rcb;
dma_addr_t rx_rcb_mapping;
+ u32 rx_pkt_buf_sz;
+
/* begin "everything else" cacheline(s) section */
struct net_device_stats net_stats;
struct net_device_stats net_stats_prev;
@@ -2124,7 +2130,7 @@ struct tg3 {
#define TG3_FLAG_NO_TX_PSEUDO_CSUM 0x00100000
#define TG3_FLAG_NO_RX_PSEUDO_CSUM 0x00200000
#define TG3_FLAG_SERDES_WOL_CAP 0x00400000
-#define TG3_FLAG_JUMBO_ENABLE 0x00800000
+#define TG3_FLAG_JUMBO_RING_ENABLE 0x00800000
#define TG3_FLAG_10_100_ONLY 0x01000000
#define TG3_FLAG_PAUSE_AUTONEG 0x02000000
#define TG3_FLAG_BROKEN_CHECKSUMS 0x10000000
@@ -2154,6 +2160,11 @@ struct tg3 {
#define TG3_FLG2_5750_PLUS 0x00080000
#define TG3_FLG2_PROTECTED_NVRAM 0x00100000
#define TG3_FLG2_USING_MSI 0x00200000
+#define TG3_FLG2_JUMBO_CAPABLE 0x00400000
+#define TG3_FLG2_MII_SERDES 0x00800000
+#define TG3_FLG2_ANY_SERDES (TG3_FLG2_PHY_SERDES | \
+ TG3_FLG2_MII_SERDES)
+#define TG3_FLG2_PARALLEL_DETECT 0x01000000
u32 split_mode_max_reqs;
#define SPLIT_MODE_5704_MAX_REQ 3
@@ -2187,6 +2198,7 @@ struct tg3 {
u8 pci_bist;
int pm_cap;
+ int msi_cap;
/* PHY info */
u32 phy_id;
@@ -2200,6 +2212,7 @@ struct tg3 {
#define PHY_ID_BCM5705 0x600081a0
#define PHY_ID_BCM5750 0x60008180
#define PHY_ID_BCM5752 0x60008100
+#define PHY_ID_BCM5780 0x60008350
#define PHY_ID_BCM8002 0x60010140
#define PHY_ID_INVALID 0xffffffff
#define PHY_ID_REV_MASK 0x0000000f
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 1b70b7c97580..d9a774b91ddc 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1414,7 +1414,7 @@ static inline void mac_get_cam(struct mac_regs __iomem * regs, int idx, u8 *addr
* the rest of the logic from the result of sleep/wakeup
*/
-inline static void mac_wol_reset(struct mac_regs __iomem * regs)
+static inline void mac_wol_reset(struct mac_regs __iomem * regs)
{
/* Turn off SWPTAG right after leaving power mode */
@@ -1811,7 +1811,7 @@ struct velocity_info {
* CHECK ME: locking
*/
-inline static int velocity_get_ip(struct velocity_info *vptr)
+static inline int velocity_get_ip(struct velocity_info *vptr)
{
struct in_device *in_dev = (struct in_device *) vptr->dev->ip_ptr;
struct in_ifaddr *ifa;
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
index 2efccb0554c0..c5f5e62aab8b 100644
--- a/drivers/net/wan/sdla_fr.c
+++ b/drivers/net/wan/sdla_fr.c
@@ -152,6 +152,7 @@
#include <asm/io.h> /* for inb(), outb(), etc. */
#include <linux/time.h> /* for do_gettimeofday */
#include <linux/in.h> /* sockaddr_in */
+#include <linux/jiffies.h> /* time_after() macro */
#include <asm/errno.h>
#include <linux/ip.h>
@@ -773,7 +774,7 @@ static int update(struct wan_device* wandev)
for(;;) {
if(card->u.f.update_comms_stats == 0)
break;
- if ((jiffies - timeout) > (1 * HZ)){
+ if (time_after(jiffies, timeout + 1 * HZ)){
card->u.f.update_comms_stats = 0;
return -EAGAIN;
}
@@ -4799,7 +4800,7 @@ static void trigger_unconfig_fr(struct net_device *dev)
{
fr_channel_t *chan = dev->priv;
volatile sdla_t *card = chan->card;
- u32 timeout;
+ unsigned long timeout;
fr508_flags_t* flags = card->flags;
int reset_critical=0;
@@ -4821,7 +4822,7 @@ static void trigger_unconfig_fr(struct net_device *dev)
if(!(card->u.f.timer_int_enabled & TMR_INT_ENABLED_UNCONFIG))
break;
- if ((jiffies - timeout) > (1 * HZ)){
+ if (time_after(jiffies, timeout + 1 * HZ)){
card->u.f.timer_int_enabled &= ~TMR_INT_ENABLED_UNCONFIG;
printk(KERN_INFO "%s: Failed to delete DLCI %i\n",
card->devname,chan->dlci);
diff --git a/drivers/net/wan/sdla_ft1.c b/drivers/net/wan/sdla_ft1.c
index 5e3124856eb0..9d6528a50f7b 100644
--- a/drivers/net/wan/sdla_ft1.c
+++ b/drivers/net/wan/sdla_ft1.c
@@ -29,6 +29,7 @@
#include <linux/wanrouter.h> /* WAN router definitions */
#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
#include <linux/if_arp.h> /* ARPHRD_* defines */
+#include <linux/jiffies.h> /* time_after() macro */
#include <linux/inetdevice.h>
#include <asm/uaccess.h>
@@ -164,7 +165,7 @@ int wpft1_init (sdla_t* card, wandev_conf_t* conf)
timeout = jiffies;
while (mb->return_code != 'I') /* Wait 1s for board to initialize */
- if ((jiffies - timeout) > 1*HZ) break;
+ if (time_after(jiffies, timeout + 1*HZ)) break;
if (mb->return_code != 'I') {
printk(KERN_INFO
diff --git a/drivers/net/wan/sdla_ppp.c b/drivers/net/wan/sdla_ppp.c
index 1761cb68ab48..a4b489cccbbf 100644
--- a/drivers/net/wan/sdla_ppp.c
+++ b/drivers/net/wan/sdla_ppp.c
@@ -101,6 +101,7 @@
#include <linux/if_arp.h> /* ARPHRD_* defines */
#include <asm/byteorder.h> /* htons(), etc. */
#include <linux/in.h> /* sockaddr_in */
+#include <linux/jiffies.h> /* time_after() macro */
#include <asm/uaccess.h>
@@ -482,7 +483,7 @@ static int update(struct wan_device *wandev)
if(ppp_priv_area->update_comms_stats == 0){
break;
}
- if ((jiffies - timeout) > (1 * HZ)){
+ if (time_after(jiffies, timeout + 1 * HZ)){
ppp_priv_area->update_comms_stats = 0;
ppp_priv_area->timer_int_enabled &=
~TMR_INT_ENABLED_UPDATE;
diff --git a/drivers/net/wan/sdla_x25.c b/drivers/net/wan/sdla_x25.c
index 3a93d2fd4fbf..8a95d61a2f8f 100644
--- a/drivers/net/wan/sdla_x25.c
+++ b/drivers/net/wan/sdla_x25.c
@@ -91,6 +91,7 @@
#include <linux/wanrouter.h> /* WAN router definitions */
#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
#include <linux/workqueue.h>
+#include <linux/jiffies.h> /* time_after() macro */
#include <asm/byteorder.h> /* htons(), etc. */
#include <asm/atomic.h>
#include <linux/delay.h> /* Experimental delay */
@@ -867,7 +868,7 @@ static int update(struct wan_device* wandev)
if (!(card->u.x.timer_int_enabled & TMR_INT_ENABLED_UPDATE)){
break;
}
- if ((jiffies-timeout) > 1*HZ){
+ if (time_after(jiffies, timeout + 1*HZ)){
card->u.x.timer_int_enabled &= ~TMR_INT_ENABLED_UPDATE;
return -EAGAIN;
}
diff --git a/drivers/net/wan/wanpipe_multppp.c b/drivers/net/wan/wanpipe_multppp.c
index 6aa6987d96cb..812a1183c502 100644
--- a/drivers/net/wan/wanpipe_multppp.c
+++ b/drivers/net/wan/wanpipe_multppp.c
@@ -26,6 +26,7 @@
#include <linux/wanrouter.h> /* WAN router definitions */
#include <linux/wanpipe.h> /* WANPIPE common user API definitions */
#include <linux/if_arp.h> /* ARPHRD_* defines */
+#include <linux/jiffies.h> /* time_after() macro */
#include <linux/in.h> /* sockaddr_in */
#include <linux/inet.h>
@@ -270,9 +271,9 @@ int wsppp_init (sdla_t* card, wandev_conf_t* conf)
ready to accept commands. We expect this to be completed in less
than 1 second. */
- timeout = jiffies;
+ timeout = jiffies + 1 * HZ;
while (mb->return_code != 'I') /* Wait 1s for board to initialize */
- if ((jiffies - timeout) > 1*HZ) break;
+ if (time_after(jiffies, timeout)) break;
if (mb->return_code != 'I') {
printk(KERN_INFO
@@ -493,11 +494,11 @@ static int update(struct wan_device* wandev)
chdlc_priv_area->timer_int_enabled = TMR_INT_ENABLED_UPDATE;
/* wait a maximum of 1 second for the statistics to be updated */
- timeout = jiffies;
+ timeout = jiffies + 1 * HZ;
for(;;) {
if(chdlc_priv_area->update_comms_stats == 0)
break;
- if ((jiffies - timeout) > (1 * HZ)){
+ if (time_after(jiffies, timeout)){
chdlc_priv_area->update_comms_stats = 0;
chdlc_priv_area->timer_int_enabled &=
~TMR_INT_ENABLED_UPDATE;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 6110187668dc..6db1fb6461de 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5020,7 +5020,7 @@ static void proc_SSID_on_close( struct inode *inode, struct file *file ) {
enable_MAC(ai, &rsp, 1);
}
-inline static u8 hexVal(char c) {
+static inline u8 hexVal(char c) {
if (c>='0' && c<='9') return c -= '0';
if (c>='a' && c<='f') return c -= 'a'-10;
if (c>='A' && c<='F') return c -= 'A'-10;
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 368d2f962f67..1cc1492083c9 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -621,8 +621,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021),
PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
OpenPOWER on IntegriCloud