diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/e1000/e1000_hw.h | 2 | ||||
| -rw-r--r-- | drivers/net/eexpress.c | 7 | ||||
| -rw-r--r-- | drivers/net/hamradio/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan_cs.c | 8 |
4 files changed, 7 insertions, 13 deletions
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index d67105883341..bd000b802ee7 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -3253,7 +3253,7 @@ struct e1000_host_command_info { #define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */ #define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */ #define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorthm is completed */ +#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */ #define IFE_PMC_MDIX_MODE_SHIFT 6 #define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */ diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 4a50fcb5ad6b..3868b8031266 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -714,13 +714,6 @@ static int eexp_xmit(struct sk_buff *buf, struct net_device *dev) * check to make sure we've not become wedged. */ -/* - * Handle an EtherExpress interrupt - * If we've finished initializing, start the RU and CU up. - * If we've already started, reap tx buffers, handle any received packets, - * check to make sure we've not become wedged. - */ - static unsigned short eexp_start_irq(struct net_device *dev, unsigned short status) { diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index feb0ada7a025..6e90619b3b41 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -138,7 +138,7 @@ config BAYCOM_SER_HDX ---help--- This is one of two drivers for Baycom style simple amateur radio modems that connect to a serial interface. The driver supports the - ser12 design in full-duplex mode. This is the old driver. It is + ser12 design in half-duplex mode. This is the old driver. It is still provided in case your serial interface chip does not work with the full-duplex driver. This driver is depreciated. To configure the driver, use the sethdlc utility available in the standard ax25 @@ -190,3 +190,4 @@ config YAM To compile this driver as a module, choose M here: the module will be called yam. + diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 5eb81638e846..b04239792f63 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -1168,7 +1168,7 @@ wv_mmc_show(struct net_device * dev) m.mmr_unused0[6], m.mmr_unused0[7]); #endif /* DEBUG_SHOW_UNUSED */ - printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n", + printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n", m.mmr_des_avail, m.mmr_des_status); #ifdef DEBUG_SHOW_UNUSED printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n", @@ -3590,9 +3590,9 @@ wv_82593_config(struct net_device * dev) cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */ cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */ cfblk.loopback = FALSE; - cfblk.lin_prio = 0; /* conform to 802.3 backoff algoritm */ - cfblk.exp_prio = 5; /* conform to 802.3 backoff algoritm */ - cfblk.bof_met = 1; /* conform to 802.3 backoff algoritm */ + cfblk.lin_prio = 0; /* conform to 802.3 backoff algorithm */ + cfblk.exp_prio = 5; /* conform to 802.3 backoff algorithm */ + cfblk.bof_met = 1; /* conform to 802.3 backoff algorithm */ cfblk.ifrm_spc = 0x20 >> 4; /* 32 bit times interframe spacing */ cfblk.slottim_low = 0x20 >> 5; /* 32 bit times slot time */ cfblk.slottim_hi = 0x0; |
