summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c29
1 files changed, 19 insertions, 10 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index df093ec830de..cafb915bc828 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1096,7 +1096,7 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget)
r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
rx_ring = &(adapter->rx_ring[r_idx]);
/* If all Rx work done, exit the polling mode */
- if ((work_done == 0) || !netif_running(netdev)) {
+ if (work_done < budget) {
netif_rx_complete(netdev, napi);
if (adapter->itr_setting & 3)
ixgbe_set_itr_msix(q_vector);
@@ -2174,32 +2174,41 @@ static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
void ixgbe_down(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
u32 rxctrl;
+ u32 txdctl;
+ int i, j;
/* signal that we are down to the interrupt handler */
set_bit(__IXGBE_DOWN, &adapter->state);
/* disable receives */
- rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL,
- rxctrl & ~IXGBE_RXCTRL_RXEN);
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
netif_tx_disable(netdev);
- /* disable transmits in the hardware */
-
- /* flush both disables */
- IXGBE_WRITE_FLUSH(&adapter->hw);
+ IXGBE_WRITE_FLUSH(hw);
msleep(10);
+ netif_tx_stop_all_queues(netdev);
+
ixgbe_irq_disable(adapter);
ixgbe_napi_disable_all(adapter);
+
del_timer_sync(&adapter->watchdog_timer);
cancel_work_sync(&adapter->watchdog_task);
+ /* disable transmits in the hardware now that interrupts are off */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ j = adapter->tx_ring[i].reg_idx;
+ txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j),
+ (txdctl & ~IXGBE_TXDCTL_ENABLE));
+ }
+
netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
@@ -2219,7 +2228,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
/* always use CB2 mode, difference is masked
* in the CB driver */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_CTRL, 2);
ixgbe_setup_dca(adapter);
}
#endif
OpenPOWER on IntegriCloud