diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/ath9k/beacon.c | 13 | ||||
| -rw-r--r-- | drivers/net/wireless/ath9k/core.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath9k/main.c | 26 | ||||
| -rw-r--r-- | drivers/net/wireless/ath9k/xmit.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/b43/rfkill.c | 18 | ||||
| -rw-r--r-- | drivers/net/wireless/b43legacy/rfkill.c | 18 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 3 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-agn.c | 27 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-core.c | 77 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-dev.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-rx.c | 5 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-scan.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-tx.c | 27 |
13 files changed, 125 insertions, 97 deletions
diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index caf569401a34..00a0eaa08866 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -209,6 +209,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) unsigned int curlen; struct ath_txq *cabq; struct ath_txq *mcastq; + struct ieee80211_tx_info *info; avp = sc->sc_vaps[if_id]; mcastq = &avp->av_mcastq; @@ -232,6 +233,18 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) */ curlen = skb->len; + info = IEEE80211_SKB_CB(skb); + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + /* + * TODO: make sure the seq# gets assigned properly (vs. other + * TX frames) + */ + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } + /* XXX: spin_lock_bh should not be used here, but sparse bitches * otherwise. We should fix sparse :) */ spin_lock_bh(&mcastq->axq_lock); diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index 673b3d81133a..4ee695b76b88 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -992,6 +992,7 @@ struct ath_softc { u32 sc_txintrperiod; /* tx interrupt batching */ int sc_haltype2q[ATH9K_WME_AC_VO+1]; /* HAL WME AC -> h/w qnum */ u32 sc_ant_tx[8]; /* recent tx frames/antenna */ + u16 seq_no; /* TX sequence number */ /* Beacon */ struct ath9k_tx_queue_info sc_beacon_qi; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 95b337149484..99badf1404c3 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -369,6 +369,20 @@ static int ath9k_tx(struct ieee80211_hw *hw, { struct ath_softc *sc = hw->priv; int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } /* Add the padding after the header if this is not already done */ hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -1067,8 +1081,16 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; tx_status->flags &= ~ATH_TX_BAR; } - if (tx_status->flags) - tx_info->status.excessive_retries = 1; + + if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + /* Frame was not ACKed, but an ACK was expected */ + tx_info->status.excessive_retries = 1; + } + } else { + /* Frame was ACKed */ + tx_info->flags |= IEEE80211_TX_STAT_ACK; + } tx_info->status.retry_count = tx_status->retries; diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 157f830ee6b8..550129f717e2 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -357,9 +357,9 @@ static int ath_tx_prepare(struct ath_softc *sc, txctl->flags = ATH9K_TXDESC_CLRDMASK; /* needed for crypto errors */ if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK) - tx_info->flags |= ATH9K_TXDESC_NOACK; + txctl->flags |= ATH9K_TXDESC_NOACK; if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) - tx_info->flags |= ATH9K_TXDESC_RTSENA; + txctl->flags |= ATH9K_TXDESC_RTSENA; /* * Setup for rate calculations. diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index fec5645944a4..34ae125d5384 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -43,23 +43,6 @@ static bool b43_is_hw_radio_enabled(struct b43_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43_rfkill_update_state(struct b43_wldev *dev) -{ - struct b43_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -77,7 +60,6 @@ static void b43_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43_rfkill_update_state(dev); b43info(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c index 476add97e974..b32bf6a94f19 100644 --- a/drivers/net/wireless/b43legacy/rfkill.c +++ b/drivers/net/wireless/b43legacy/rfkill.c @@ -44,23 +44,6 @@ static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev) return 0; } -/* Update the rfkill state */ -static void b43legacy_rfkill_update_state(struct b43legacy_wldev *dev) -{ - struct b43legacy_rfkill *rfk = &(dev->wl->rfkill); - - if (!dev->radio_hw_enable) { - rfk->rfkill->state = RFKILL_STATE_HARD_BLOCKED; - return; - } - - if (!dev->phy.radio_on) - rfk->rfkill->state = RFKILL_STATE_SOFT_BLOCKED; - else - rfk->rfkill->state = RFKILL_STATE_UNBLOCKED; - -} - /* The poll callback for the hardware button. */ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) { @@ -78,7 +61,6 @@ static void b43legacy_rfkill_poll(struct input_polled_dev *poll_dev) if (unlikely(enabled != dev->radio_hw_enable)) { dev->radio_hw_enable = enabled; report_change = 1; - b43legacy_rfkill_update_state(dev); b43legacyinfo(wl, "Radio hardware status changed to %s\n", enabled ? "ENABLED" : "DISABLED"); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 754fef5b592f..90a2b6dee7c0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1153,7 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, !sta->ht_info.ht_supported) return -1; - if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC) + if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2) + == IWL_MIMO_PS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c0b73c4d6f44..e01f048a02dd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -181,14 +181,14 @@ static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon) } /** - * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed + * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed * @priv: staging_rxon is compared to active_rxon * * If the RXON structure is changing enough to require a new tune, * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. */ -static int iwl4965_full_rxon_required(struct iwl_priv *priv) +static int iwl_full_rxon_required(struct iwl_priv *priv) { /* These items are only settable from the full RXON command */ @@ -207,7 +207,6 @@ static int iwl4965_full_rxon_required(struct iwl_priv *priv) priv->active_rxon.ofdm_ht_single_stream_basic_rates) || (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || - (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) || (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) return 1; @@ -263,7 +262,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv) /* If we don't need to send a full RXON, we can use * iwl4965_rxon_assoc_cmd which is used to reconfigure filter * and other flags for the current radio configuration. */ - if (!iwl4965_full_rxon_required(priv)) { + if (!iwl_full_rxon_required(priv)) { ret = iwl_send_rxon_assoc(priv); if (ret) { IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret); @@ -587,8 +586,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, iwl_conf->supported_chan_width = 0; } - iwl_conf->tx_mimo_ps_mode = - (u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2); memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16); iwl_conf->control_channel = ht_bss_conf->primary_channel; @@ -2190,7 +2187,10 @@ static void __iwl4965_down(struct iwl_priv *priv) udelay(5); /* FIXME: apm_ops.suspend(priv) */ - priv->cfg->ops->lib->apm_ops.reset(priv); + if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status)) + priv->cfg->ops->lib->apm_ops.stop(priv); + else + priv->cfg->ops->lib->apm_ops.reset(priv); priv->cfg->ops->lib->free_shared_mem(priv); exit: @@ -3588,7 +3588,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk priv->assoc_id = 0; timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; - priv->timestamp = le64_to_cpu(timestamp) + (priv->beacon_int * 1000); + priv->timestamp = le64_to_cpu(timestamp); IWL_DEBUG_MAC80211("leave\n"); spin_unlock_irqrestore(&priv->lock, flags); @@ -4372,15 +4372,18 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev) iwl_dbgfs_unregister(priv); sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group); + /* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to + * to be called and iwl4965_down since we are removing the device + * we need to set STATUS_EXIT_PENDING bit. + */ + set_bit(STATUS_EXIT_PENDING, &priv->status); if (priv->mac80211_registered) { ieee80211_unregister_hw(priv->hw); priv->mac80211_registered = 0; + } else { + iwl4965_down(priv); } - set_bit(STATUS_EXIT_PENDING, &priv->status); - - iwl4965_down(priv); - /* make sure we flush any pending irq or * tasklet for the driver */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index c72f72579bea..80f2f84defa8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -592,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv) clear_bit(STATUS_GEO_CONFIGURED, &priv->status); } -static u8 is_single_rx_stream(struct iwl_priv *priv) +static bool is_single_rx_stream(struct iwl_priv *priv) { return !priv->current_ht_config.is_ht || ((priv->current_ht_config.supp_mcs_set[1] == 0) && - (priv->current_ht_config.supp_mcs_set[2] == 0)) || - priv->ps_mode == IWL_MIMO_PS_STATIC; + (priv->current_ht_config.supp_mcs_set[2] == 0)); } static u8 iwl_is_channel_extension(struct iwl_priv *priv, @@ -704,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht); * MIMO (dual stream) requires at least 2, but works better with 3. * This does not determine *which* chains to use, just how many. */ -static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, - u8 *idle_state, u8 *rx_state) +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # of Rx chains to use when expecting MIMO. */ if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - *rx_state = 2; + return 2; else - *rx_state = 3; + return 3; +} +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + int idle_cnt; + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # Rx chains when idling and maybe trying to save power */ switch (priv->ps_mode) { case IWL_MIMO_PS_STATIC: case IWL_MIMO_PS_DYNAMIC: - *idle_state = (is_cam) ? 2 : 1; + idle_cnt = (is_cam) ? 2 : 1; break; case IWL_MIMO_PS_NONE: - *idle_state = (is_cam) ? *rx_state : 1; + idle_cnt = (is_cam) ? active_cnt : 1; break; + case IWL_MIMO_PS_INVALID: default: - *idle_state = 1; + IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); + WARN_ON(1); + idle_cnt = -1; break; } - - return 0; + return idle_cnt; } /** @@ -741,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, */ void iwl_set_rxon_chain(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 idle_state, rx_state; - - priv->staging_rxon.rx_chain = 0; - rx_state = idle_state = 3; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt; + u16 rx_chain; /* Tell uCode which antennas are actually connected. * Before first association, we assume all antennas are connected. * Just after first association, iwl_chain_noise_calibration() * checks which antennas actually *are* connected. */ - priv->staging_rxon.rx_chain |= - cpu_to_le16(priv->hw_params.valid_rx_ant << - RXON_RX_CHAIN_VALID_POS); + rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; /* How many receivers should we use? */ - iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state); - priv->staging_rxon.rx_chain |= - cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); - priv->staging_rxon.rx_chain |= - cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); - - if (!is_single && (rx_state >= 2) && - !test_bit(STATUS_POWER_PMI, &priv->status)) + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); + + /* correct rx chain count accoridng hw settings */ + if (priv->hw_params.rx_chains_num < active_rx_cnt) + active_rx_cnt = priv->hw_params.rx_chains_num; + + if (priv->hw_params.rx_chains_num < idle_rx_cnt) + idle_rx_cnt = priv->hw_params.rx_chains_num; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= 2) && is_cam) priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; else priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); + IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n", + priv->staging_rxon.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); } EXPORT_SYMBOL(iwl_set_rxon_chain); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index c19db438306c..cdfb343c7ec6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -412,7 +412,6 @@ struct iwl_ht_info { /* self configuration data */ u8 is_ht; u8 supported_chan_width; - u16 tx_mimo_ps_mode; u8 is_green_field; u8 sgf; /* HT_SHORT_GI_* short guard interval */ u8 max_amsdu_size; diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index f3f6ea49fdd2..e81bfc42a7cb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -1173,7 +1173,10 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, rx_status.antenna = 0; rx_status.flag = 0; - rx_status.flag |= RX_FLAG_TSFT; + + /* TSF isn't reliable. In order to allow smooth user experience, + * this W/A doesn't propagate it to the mac80211 */ + /*rx_status.flag |= RX_FLAG_TSFT;*/ if ((unlikely(rx_start->cfg_phy_cnt > 20))) { IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n", diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 9bb6adb28b73..6c8ac3a87d54 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -421,7 +421,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, else scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE; - if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes) + if (n_probes) scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes); scan_ch->active_dwell = cpu_to_le16(active_dwell); diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index ff879d46624a..78b1a7a4ca40 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -402,12 +402,11 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv, /** * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue */ -static int iwl_tx_queue_init(struct iwl_priv *priv, - struct iwl_tx_queue *txq, +static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { int i, len; - int rc = 0; + int ret; /* * Alloc buffer array for commands (Tx or other types of commands). @@ -428,17 +427,14 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, txq->cmd[i] = kmalloc(len, GFP_KERNEL); if (!txq->cmd[i]) - return -ENOMEM; + goto err; } /* Alloc driver data array and TFD circular buffer */ - rc = iwl_tx_queue_alloc(priv, txq, txq_id); - if (rc) { - for (i = 0; i < slots_num; i++) - kfree(txq->cmd[i]); + ret = iwl_tx_queue_alloc(priv, txq, txq_id); + if (ret) + goto err; - return -ENOMEM; - } txq->need_update = 0; /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise @@ -452,6 +448,17 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, iwl_hw_tx_queue_init(priv, txq); return 0; +err: + for (i = 0; i < slots_num; i++) { + kfree(txq->cmd[i]); + txq->cmd[i] = NULL; + } + + if (txq_id == IWL_CMD_QUEUE_NUM) { + kfree(txq->cmd[slots_num]); + txq->cmd[slots_num] = NULL; + } + return -ENOMEM; } /** * iwl_hw_txq_ctx_free - Free TXQ Context |
