summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx.h7
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_leds.c11
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_main.c36
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_radio.c2
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_radio.h16
-rw-r--r--drivers/net/wireless/ipw2200.c4
-rw-r--r--drivers/net/wireless/orinoco.c2
-rw-r--r--drivers/net/wireless/prism54/islpci_dev.c13
-rw-r--r--drivers/net/wireless/prism54/islpci_dev.h4
-rw-r--r--drivers/net/wireless/prism54/islpci_hotplug.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c126
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.h158
-rw-r--r--drivers/net/wireless/zd1211rw/zd_def.h2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_ieee80211.h1
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf.h2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_types.h71
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.c128
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.h6
18 files changed, 250 insertions, 342 deletions
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index 8286678513b9..3a064def162e 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -352,6 +352,10 @@
#define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040
#define BCM43xx_UCODEFLAG_JAPAN 0x0080
+/* Hardware Radio Enable masks */
+#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
/* Generic-Interrupt reasons. */
#define BCM43xx_IRQ_READY (1 << 0)
#define BCM43xx_IRQ_BEACON (1 << 1)
@@ -758,7 +762,8 @@ struct bcm43xx_private {
bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */
reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */
short_preamble:1, /* TRUE, if short preamble is enabled. */
- firmware_norelease:1; /* Do not release the firmware. Used on suspend. */
+ firmware_norelease:1, /* Do not release the firmware. Used on suspend. */
+ radio_hw_enable:1; /* TRUE if radio is hardware enabled */
struct bcm43xx_stats stats;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
index 7d383a27b927..8f198befba39 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c
@@ -26,6 +26,7 @@
*/
#include "bcm43xx_leds.h"
+#include "bcm43xx_radio.h"
#include "bcm43xx.h"
#include <asm/bitops.h>
@@ -108,6 +109,7 @@ static void bcm43xx_led_init_hardcoded(struct bcm43xx_private *bcm,
switch (led_index) {
case 0:
led->behaviour = BCM43xx_LED_ACTIVITY;
+ led->activelow = 1;
if (bcm->board_vendor == PCI_VENDOR_ID_COMPAQ)
led->behaviour = BCM43xx_LED_RADIO_ALL;
break;
@@ -199,20 +201,21 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity)
turn_on = activity;
break;
case BCM43xx_LED_RADIO_ALL:
- turn_on = radio->enabled;
+ turn_on = radio->enabled && bcm43xx_is_hw_radio_enabled(bcm);
break;
case BCM43xx_LED_RADIO_A:
case BCM43xx_LED_BCM4303_2:
- turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
+ turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
+ phy->type == BCM43xx_PHYTYPE_A);
break;
case BCM43xx_LED_RADIO_B:
case BCM43xx_LED_BCM4303_1:
- turn_on = (radio->enabled &&
+ turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
(phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G));
break;
case BCM43xx_LED_MODE_BG:
- if (phy->type == BCM43xx_PHYTYPE_G &&
+ if (phy->type == BCM43xx_PHYTYPE_G && bcm43xx_is_hw_radio_enabled(bcm) &&
1/*FIXME: using G rates.*/)
turn_on = 1;
break;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 91b752e3d07e..23aaf1ed8541 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -2441,6 +2441,9 @@ static int bcm43xx_chip_init(struct bcm43xx_private *bcm)
if (err)
goto err_gpio_cleanup;
bcm43xx_radio_turn_on(bcm);
+ bcm->radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
+ dprintk(KERN_INFO PFX "Radio %s by hardware\n",
+ (bcm->radio_hw_enable == 0) ? "disabled" : "enabled");
bcm43xx_write16(bcm, 0x03E6, 0x0000);
err = bcm43xx_phy_init(bcm);
@@ -3175,9 +3178,24 @@ static void bcm43xx_periodic_every30sec(struct bcm43xx_private *bcm)
static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
{
+ bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
+ //TODO for APHY (temperature?)
+}
+
+static void bcm43xx_periodic_every1sec(struct bcm43xx_private *bcm)
+{
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ int radio_hw_enable;
+ /* check if radio hardware enabled status changed */
+ radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
+ if (unlikely(bcm->radio_hw_enable != radio_hw_enable)) {
+ bcm->radio_hw_enable = radio_hw_enable;
+ dprintk(KERN_INFO PFX "Radio hardware status changed to %s\n",
+ (radio_hw_enable == 0) ? "disabled" : "enabled");
+ bcm43xx_leds_update(bcm, 0);
+ }
if (phy->type == BCM43xx_PHYTYPE_G) {
//TODO: update_aci_moving_average
if (radio->aci_enable && radio->aci_wlan_automatic) {
@@ -3201,21 +3219,21 @@ static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
//TODO: implement rev1 workaround
}
}
- bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
- //TODO for APHY (temperature?)
}
static void do_periodic_work(struct bcm43xx_private *bcm)
{
- if (bcm->periodic_state % 8 == 0)
+ if (bcm->periodic_state % 120 == 0)
bcm43xx_periodic_every120sec(bcm);
- if (bcm->periodic_state % 4 == 0)
+ if (bcm->periodic_state % 60 == 0)
bcm43xx_periodic_every60sec(bcm);
- if (bcm->periodic_state % 2 == 0)
+ if (bcm->periodic_state % 30 == 0)
bcm43xx_periodic_every30sec(bcm);
- bcm43xx_periodic_every15sec(bcm);
+ if (bcm->periodic_state % 15 == 0)
+ bcm43xx_periodic_every15sec(bcm);
+ bcm43xx_periodic_every1sec(bcm);
- schedule_delayed_work(&bcm->periodic_work, HZ * 15);
+ schedule_delayed_work(&bcm->periodic_work, HZ);
}
static void bcm43xx_periodic_work_handler(struct work_struct *work)
@@ -3228,7 +3246,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work)
unsigned long orig_trans_start = 0;
mutex_lock(&bcm->mutex);
- if (unlikely(bcm->periodic_state % 4 == 0)) {
+ if (unlikely(bcm->periodic_state % 60 == 0)) {
/* Periodic work will take a long time, so we want it to
* be preemtible.
*/
@@ -3260,7 +3278,7 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work)
do_periodic_work(bcm);
- if (unlikely(bcm->periodic_state % 4 == 0)) {
+ if (unlikely(bcm->periodic_state % 60 == 0)) {
spin_lock_irqsave(&bcm->irq_lock, flags);
tasklet_enable(&bcm->isr_tasklet);
bcm43xx_interrupt_enable(bcm, savedirqs);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
index bb9c484d7e19..af19a07032a3 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c
@@ -1981,6 +1981,7 @@ void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm)
}
radio->enabled = 1;
dprintk(KERN_INFO PFX "Radio turned on\n");
+ bcm43xx_leds_update(bcm, 0);
}
void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
@@ -2001,6 +2002,7 @@ void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
bcm43xx_phy_write(bcm, 0x0015, 0xAA00);
radio->enabled = 0;
dprintk(KERN_INFO PFX "Radio turned off\n");
+ bcm43xx_leds_update(bcm, 0);
}
void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.h b/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
index 9ed18039fa3e..77a98a53a2e2 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.h
@@ -65,6 +65,22 @@ void bcm43xx_radio_init2060(struct bcm43xx_private *bcm);
void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm);
void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm);
+static inline
+int bcm43xx_is_hw_radio_enabled(struct bcm43xx_private *bcm)
+{
+ /* function to return state of hardware enable of radio
+ * returns 0 if radio disabled, 1 if radio enabled
+ */
+ if (bcm->current_core->rev >= 3)
+ return ((bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI)
+ & BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK)
+ == 0) ? 1 : 0;
+ else
+ return ((bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO)
+ & BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK)
+ == 0) ? 0 : 1;
+}
+
int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u8 channel,
int synthetic_pu_workaround);
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 22cb3fb7502e..c878a2f3239c 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -9166,7 +9166,7 @@ static int ipw_wx_set_rts(struct net_device *dev,
{
struct ipw_priv *priv = ieee80211_priv(dev);
mutex_lock(&priv->mutex);
- if (wrqu->rts.disabled)
+ if (wrqu->rts.disabled || !wrqu->rts.fixed)
priv->rts_threshold = DEFAULT_RTS_THRESHOLD;
else {
if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
@@ -9255,7 +9255,7 @@ static int ipw_wx_set_frag(struct net_device *dev,
{
struct ipw_priv *priv = ieee80211_priv(dev);
mutex_lock(&priv->mutex);
- if (wrqu->frag.disabled)
+ if (wrqu->frag.disabled || !wrqu->frag.fixed)
priv->ieee->fts = DEFAULT_FTS;
else {
if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 936c888e03e1..2a65bb93de26 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -2059,7 +2059,7 @@ static int determine_firmware(struct net_device *dev)
int err;
struct comp_id nic_id, sta_id;
unsigned int firmver;
- char tmp[SYMBOL_MAX_VER_LEN+1];
+ char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
/* Get the hardware version */
err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index f057fd9fcd79..a037b11dac9d 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/netdevice.h>
+#include <linux/ethtool.h>
#include <linux/pci.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
@@ -787,6 +788,17 @@ islpci_set_multicast_list(struct net_device *dev)
}
#endif
+static void islpci_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+}
+
+static struct ethtool_ops islpci_ethtool_ops = {
+ .get_drvinfo = islpci_ethtool_get_drvinfo,
+};
+
struct net_device *
islpci_setup(struct pci_dev *pdev)
{
@@ -813,6 +825,7 @@ islpci_setup(struct pci_dev *pdev)
ndev->do_ioctl = &prism54_ioctl;
ndev->wireless_handlers =
(struct iw_handler_def *) &prism54_handler_def;
+ ndev->ethtool_ops = &islpci_ethtool_ops;
ndev->hard_start_xmit = &islpci_eth_transmit;
/* ndev->set_multicast_list = &islpci_set_multicast_list; */
diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h
index a9aa1662eaa4..736666da6c24 100644
--- a/drivers/net/wireless/prism54/islpci_dev.h
+++ b/drivers/net/wireless/prism54/islpci_dev.h
@@ -211,4 +211,8 @@ islpci_trigger(islpci_private *priv)
int islpci_free_memory(islpci_private *);
struct net_device *islpci_setup(struct pci_dev *);
+
+#define DRV_NAME "prism54"
+#define DRV_VERSION "1.2"
+
#endif /* _ISLPCI_DEV_H */
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 58257b40c043..3dcb13bb7d57 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -28,9 +28,6 @@
#include "islpci_mgt.h" /* for pc_debug */
#include "isl_oid.h"
-#define DRV_NAME "prism54"
-#define DRV_VERSION "1.2"
-
MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>");
MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 78ea72fb8f0c..12dfc0b6efe6 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -84,6 +84,18 @@ static void print_id(struct zd_chip *chip)
dev_info(zd_chip_dev(chip), "%s\n", buffer);
}
+static zd_addr_t inc_addr(zd_addr_t addr)
+{
+ u16 a = (u16)addr;
+ /* Control registers use byte addressing, but everything else uses word
+ * addressing. */
+ if ((a & 0xf000) == CR_START)
+ a += 2;
+ else
+ a += 1;
+ return (zd_addr_t)a;
+}
+
/* Read a variable number of 32-bit values. Parameter count is not allowed to
* exceed USB_MAX_IOREAD32_COUNT.
*/
@@ -114,7 +126,7 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr
for (i = 0; i < count; i++) {
int j = 2*i;
/* We read the high word always first. */
- a16[j] = zd_inc_word(addr[i]);
+ a16[j] = inc_addr(addr[i]);
a16[j+1] = addr[i];
}
@@ -163,7 +175,7 @@ int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs,
j = 2*i;
/* We write the high word always first. */
ioreqs16[j].value = ioreqs[i].value >> 16;
- ioreqs16[j].addr = zd_inc_word(ioreqs[i].addr);
+ ioreqs16[j].addr = inc_addr(ioreqs[i].addr);
ioreqs16[j+1].value = ioreqs[i].value;
ioreqs16[j+1].addr = ioreqs[i].addr;
}
@@ -466,7 +478,8 @@ static int read_values(struct zd_chip *chip, u8 *values, size_t count,
ZD_ASSERT(mutex_is_locked(&chip->mutex));
for (i = 0;;) {
- r = zd_ioread32_locked(chip, &v, e2p_addr+i/2);
+ r = zd_ioread32_locked(chip, &v,
+ (zd_addr_t)((u16)e2p_addr+i/2));
if (r)
return r;
v -= guard;
@@ -798,47 +811,18 @@ static int hw_reset_phy(struct zd_chip *chip)
static int zd1211_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
- { CR_ACK_TIMEOUT_EXT, 0x20 },
- { CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
{ CR_ZD1211_RETRY_MAX, 0x2 },
- { CR_SNIFFER_ON, 0 },
- { CR_RX_FILTER, STA_RX_FILTER },
- { CR_GROUP_HASH_P1, 0x00 },
- { CR_GROUP_HASH_P2, 0x80000000 },
- { CR_REG1, 0xa4 },
- { CR_ADDA_PWR_DWN, 0x7f },
- { CR_BCN_PLCP_CFG, 0x00f00401 },
- { CR_PHY_DELAY, 0x00 },
- { CR_ACK_TIMEOUT_EXT, 0x80 },
- { CR_ADDA_PWR_DWN, 0x00 },
- { CR_ACK_TIME_80211, 0x100 },
- { CR_RX_PE_DELAY, 0x70 },
- { CR_PS_CTRL, 0x10000000 },
- { CR_RTS_CTS_RATE, 0x02030203 },
{ CR_RX_THRESHOLD, 0x000c0640 },
- { CR_AFTER_PNP, 0x1 },
- { CR_WEP_PROTECT, 0x114 },
};
- int r;
-
dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
- r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
-#ifdef DEBUG
- if (r) {
- dev_err(zd_chip_dev(chip),
- "error in zd_iowrite32a_locked. Error number %d\n", r);
- }
-#endif /* DEBUG */
- return r;
+ return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
static int zd1211b_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
- { CR_ACK_TIMEOUT_EXT, 0x20 },
- { CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
{ CR_ZD1211B_RETRY_MAX, 0x02020202 },
{ CR_ZD1211B_TX_PWR_CTL4, 0x007f003f },
{ CR_ZD1211B_TX_PWR_CTL3, 0x007f003f },
@@ -847,6 +831,20 @@ static int zd1211b_hw_init_hmac(struct zd_chip *chip)
{ CR_ZD1211B_AIFS_CTL1, 0x00280028 },
{ CR_ZD1211B_AIFS_CTL2, 0x008C003C },
{ CR_ZD1211B_TXOP, 0x01800824 },
+ { CR_RX_THRESHOLD, 0x000c0eff, },
+ };
+
+ dev_dbg_f(zd_chip_dev(chip), "\n");
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+}
+
+static int hw_init_hmac(struct zd_chip *chip)
+{
+ int r;
+ static const struct zd_ioreq32 ioreqs[] = {
+ { CR_ACK_TIMEOUT_EXT, 0x20 },
+ { CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
{ CR_SNIFFER_ON, 0 },
{ CR_RX_FILTER, STA_RX_FILTER },
{ CR_GROUP_HASH_P1, 0x00 },
@@ -861,25 +859,16 @@ static int zd1211b_hw_init_hmac(struct zd_chip *chip)
{ CR_RX_PE_DELAY, 0x70 },
{ CR_PS_CTRL, 0x10000000 },
{ CR_RTS_CTS_RATE, 0x02030203 },
- { CR_RX_THRESHOLD, 0x000c0eff, },
{ CR_AFTER_PNP, 0x1 },
{ CR_WEP_PROTECT, 0x114 },
+ { CR_IFS_VALUE, IFS_VALUE_DEFAULT },
};
- int r;
-
- dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
- if (r) {
- dev_dbg_f(zd_chip_dev(chip),
- "error in zd_iowrite32a_locked. Error number %d\n", r);
- }
- return r;
-}
+ if (r)
+ return r;
-static int hw_init_hmac(struct zd_chip *chip)
-{
return chip->is_zd1211b ?
zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip);
}
@@ -974,16 +963,14 @@ static int hw_init(struct zd_chip *chip)
if (r)
return r;
- /* Although the vendor driver defaults to a different value during
- * init, it overwrites the IFS value with the following every time
- * the channel changes. We should aim to be more intelligent... */
- r = zd_iowrite32_locked(chip, IFS_VALUE_DEFAULT, CR_IFS_VALUE);
- if (r)
- return r;
-
return set_beacon_interval(chip, 100);
}
+static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset)
+{
+ return (zd_addr_t)((u16)chip->fw_regs_base + offset);
+}
+
#ifdef DEBUG
static int dump_cr(struct zd_chip *chip, const zd_addr_t addr,
const char *addr_string)
@@ -1018,9 +1005,11 @@ static int test_init(struct zd_chip *chip)
static void dump_fw_registers(struct zd_chip *chip)
{
- static const zd_addr_t addr[4] = {
- FW_FIRMWARE_VER, FW_USB_SPEED, FW_FIX_TX_RATE,
- FW_LINK_STATUS
+ const zd_addr_t addr[4] = {
+ fw_reg_addr(chip, FW_REG_FIRMWARE_VER),
+ fw_reg_addr(chip, FW_REG_USB_SPEED),
+ fw_reg_addr(chip, FW_REG_FIX_TX_RATE),
+ fw_reg_addr(chip, FW_REG_LED_LINK_STATUS),
};
int r;
@@ -1046,7 +1035,8 @@ static int print_fw_version(struct zd_chip *chip)
int r;
u16 version;
- r = zd_ioread16_locked(chip, &version, FW_FIRMWARE_VER);
+ r = zd_ioread16_locked(chip, &version,
+ fw_reg_addr(chip, FW_REG_FIRMWARE_VER));
if (r)
return r;
@@ -1126,6 +1116,22 @@ int zd_chip_disable_hwint(struct zd_chip *chip)
return r;
}
+static int read_fw_regs_offset(struct zd_chip *chip)
+{
+ int r;
+
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ r = zd_ioread16_locked(chip, (u16*)&chip->fw_regs_base,
+ FWRAW_REGS_ADDR);
+ if (r)
+ return r;
+ dev_dbg_f(zd_chip_dev(chip), "fw_regs_base: %#06hx\n",
+ (u16)chip->fw_regs_base);
+
+ return 0;
+}
+
+
int zd_chip_init_hw(struct zd_chip *chip, u8 device_type)
{
int r;
@@ -1145,7 +1151,7 @@ int zd_chip_init_hw(struct zd_chip *chip, u8 device_type)
if (r)
goto out;
- r = zd_usb_init_hw(&chip->usb);
+ r = read_fw_regs_offset(chip);
if (r)
goto out;
@@ -1325,15 +1331,15 @@ u8 zd_chip_get_channel(struct zd_chip *chip)
int zd_chip_control_leds(struct zd_chip *chip, enum led_status status)
{
- static const zd_addr_t a[] = {
- FW_LINK_STATUS,
+ const zd_addr_t a[] = {
+ fw_reg_addr(chip, FW_REG_LED_LINK_STATUS),
CR_LED,
};
int r;
u16 v[ARRAY_SIZE(a)];
struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = {
- [0] = { FW_LINK_STATUS },
+ [0] = { fw_reg_addr(chip, FW_REG_LED_LINK_STATUS) },
[1] = { CR_LED },
};
u16 other_led;
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index a4e3cee9b59d..b07569e391ee 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -18,7 +18,6 @@
#ifndef _ZD_CHIP_H
#define _ZD_CHIP_H
-#include "zd_types.h"
#include "zd_rf.h"
#include "zd_usb.h"
@@ -27,6 +26,37 @@
* adds a processor for handling the USB protocol.
*/
+/* Address space */
+enum {
+ /* CONTROL REGISTERS */
+ CR_START = 0x9000,
+
+
+ /* FIRMWARE */
+ FW_START = 0xee00,
+
+
+ /* EEPROM */
+ E2P_START = 0xf800,
+ E2P_LEN = 0x800,
+
+ /* EEPROM layout */
+ E2P_LOAD_CODE_LEN = 0xe, /* base 0xf800 */
+ E2P_LOAD_VECT_LEN = 0x9, /* base 0xf80e */
+ /* E2P_DATA indexes into this */
+ E2P_DATA_LEN = 0x7e, /* base 0xf817 */
+ E2P_BOOT_CODE_LEN = 0x760, /* base 0xf895 */
+ E2P_INTR_VECT_LEN = 0xb, /* base 0xfff5 */
+
+ /* Some precomputed offsets into the EEPROM */
+ E2P_DATA_OFFSET = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN,
+ E2P_BOOT_CODE_OFFSET = E2P_DATA_OFFSET + E2P_DATA_LEN,
+};
+
+#define CTL_REG(offset) ((zd_addr_t)(CR_START + (offset)))
+#define E2P_DATA(offset) ((zd_addr_t)(E2P_START + E2P_DATA_OFFSET + (offset)))
+#define FWRAW_DATA(offset) ((zd_addr_t)(FW_START + (offset)))
+
/* 8-bit hardware registers */
#define CR0 CTL_REG(0x0000)
#define CR1 CTL_REG(0x0004)
@@ -302,7 +332,7 @@
#define CR_MAX_PHY_REG 255
-/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211
+/* Taken from the ZYDAS driver, not all of them are relevant for the ZD1211
* driver.
*/
@@ -594,81 +624,71 @@
/*
* Upper 16 bit contains the regulatory domain.
*/
-#define E2P_SUBID E2P_REG(0x00)
-#define E2P_POD E2P_REG(0x02)
-#define E2P_MAC_ADDR_P1 E2P_REG(0x04)
-#define E2P_MAC_ADDR_P2 E2P_REG(0x06)
-#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08)
-#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a)
-#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c)
-#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e)
-#define E2P_PWR_INT_VALUE1 E2P_REG(0x10)
-#define E2P_PWR_INT_VALUE2 E2P_REG(0x12)
-#define E2P_PWR_INT_VALUE3 E2P_REG(0x14)
-#define E2P_PWR_INT_VALUE4 E2P_REG(0x16)
+#define E2P_SUBID E2P_DATA(0x00)
+#define E2P_POD E2P_DATA(0x02)
+#define E2P_MAC_ADDR_P1 E2P_DATA(0x04)
+#define E2P_MAC_ADDR_P2 E2P_DATA(0x06)
+#define E2P_PWR_CAL_VALUE1 E2P_DATA(0x08)
+#define E2P_PWR_CAL_VALUE2 E2P_DATA(0x0a)
+#define E2P_PWR_CAL_VALUE3 E2P_DATA(0x0c)
+#define E2P_PWR_CAL_VALUE4 E2P_DATA(0x0e)
+#define E2P_PWR_INT_VALUE1 E2P_DATA(0x10)
+#define E2P_PWR_INT_VALUE2 E2P_DATA(0x12)
+#define E2P_PWR_INT_VALUE3 E2P_DATA(0x14)
+#define E2P_PWR_INT_VALUE4 E2P_DATA(0x16)
/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30)
* also only 11 channels. */
-#define E2P_ALLOWED_CHANNEL E2P_REG(0x18)
-
-#define E2P_PHY_REG E2P_REG(0x1a)
-#define E2P_DEVICE_VER E2P_REG(0x20)
-#define E2P_36M_CAL_VALUE1 E2P_REG(0x28)
-#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a)
-#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c)
-#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e)
-#define E2P_11A_INT_VALUE1 E2P_REG(0x30)
-#define E2P_11A_INT_VALUE2 E2P_REG(0x32)
-#define E2P_11A_INT_VALUE3 E2P_REG(0x34)
-#define E2P_11A_INT_VALUE4 E2P_REG(0x36)
-#define E2P_48M_CAL_VALUE1 E2P_REG(0x38)
-#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a)
-#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c)
-#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e)
-#define E2P_48M_INT_VALUE1 E2P_REG(0x40)
-#define E2P_48M_INT_VALUE2 E2P_REG(0x42)
-#define E2P_48M_INT_VALUE3 E2P_REG(0x44)
-#define E2P_48M_INT_VALUE4 E2P_REG(0x46)
-#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */
-#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a)
-#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c)
-#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e)
-#define E2P_54M_INT_VALUE1 E2P_REG(0x50)
-#define E2P_54M_INT_VALUE2 E2P_REG(0x52)
-#define E2P_54M_INT_VALUE3 E2P_REG(0x54)
-#define E2P_54M_INT_VALUE4 E2P_REG(0x56)
-
-/* All 16 bit values */
-#define FW_FIRMWARE_VER FW_REG(0)
-/* non-zero if USB high speed connection */
-#define FW_USB_SPEED FW_REG(1)
-#define FW_FIX_TX_RATE FW_REG(2)
-/* Seems to be able to control LEDs over the firmware */
-#define FW_LINK_STATUS FW_REG(3)
-#define FW_SOFT_RESET FW_REG(4)
-#define FW_FLASH_CHK FW_REG(5)
+#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18)
+
+#define E2P_PHY_REG E2P_DATA(0x1a)
+#define E2P_DEVICE_VER E2P_DATA(0x20)
+#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28)
+#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a)
+#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c)
+#define E2P_36M_CAL_VALUE4 E2P_DATA(0x2e)
+#define E2P_11A_INT_VALUE1 E2P_DATA(0x30)
+#define E2P_11A_INT_VALUE2 E2P_DATA(0x32)
+#define E2P_11A_INT_VALUE3 E2P_DATA(0x34)
+#define E2P_11A_INT_VALUE4 E2P_DATA(0x36)
+#define E2P_48M_CAL_VALUE1 E2P_DATA(0x38)
+#define E2P_48M_CAL_VALUE2 E2P_DATA(0x3a)
+#define E2P_48M_CAL_VALUE3 E2P_DATA(0x3c)
+#define E2P_48M_CAL_VALUE4 E2P_DATA(0x3e)
+#define E2P_48M_INT_VALUE1 E2P_DATA(0x40)
+#define E2P_48M_INT_VALUE2 E2P_DATA(0x42)
+#define E2P_48M_INT_VALUE3 E2P_DATA(0x44)
+#define E2P_48M_INT_VALUE4 E2P_DATA(0x46)
+#define E2P_54M_CAL_VALUE1 E2P_DATA(0x48) /* ??? */
+#define E2P_54M_CAL_VALUE2 E2P_DATA(0x4a)
+#define E2P_54M_CAL_VALUE3 E2P_DATA(0x4c)
+#define E2P_54M_CAL_VALUE4 E2P_DATA(0x4e)
+#define E2P_54M_INT_VALUE1 E2P_DATA(0x50)
+#define E2P_54M_INT_VALUE2 E2P_DATA(0x52)
+#define E2P_54M_INT_VALUE3 E2P_DATA(0x54)
+#define E2P_54M_INT_VALUE4 E2P_DATA(0x56)
+
+/* This word contains the base address of the FW_REG_ registers below */
+#define FWRAW_REGS_ADDR FWRAW_DATA(0x1d)
+
+/* All 16 bit values, offset from the address in FWRAW_REGS_ADDR */
+enum {
+ FW_REG_FIRMWARE_VER = 0,
+ /* non-zero if USB high speed connection */
+ FW_REG_USB_SPEED = 1,
+ FW_REG_FIX_TX_RATE = 2,
+ /* Seems to be able to control LEDs over the firmware */
+ FW_REG_LED_LINK_STATUS = 3,
+ FW_REG_SOFT_RESET = 4,
+ FW_REG_FLASH_CHK = 5,
+};
+/* Values for FW_LINK_STATUS */
#define FW_LINK_OFF 0x0
#define FW_LINK_TX 0x1
/* 0x2 - link led on? */
enum {
- CR_BASE_OFFSET = 0x9000,
- FW_START_OFFSET = 0xee00,
- FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d,
- EEPROM_START_OFFSET = 0xf800,
- EEPROM_SIZE = 0x800, /* words */
- LOAD_CODE_SIZE = 0xe, /* words */
- LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */
- EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE,
- EEPROM_REGS_SIZE = 0x7e, /* words */
- E2P_BASE_OFFSET = EEPROM_START_OFFSET +
- EEPROM_REGS_OFFSET,
-};
-
-#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d)
-
-enum {
/* indices for ofdm_cal_values */
OFDM_36M_INDEX = 0,
OFDM_48M_INDEX = 1,
@@ -679,6 +699,8 @@ struct zd_chip {
struct zd_usb usb;
struct zd_rf rf;
struct mutex mutex;
+ /* Base address of FW_REG_ registers */
+ zd_addr_t fw_regs_base;
u8 e2p_mac[ETH_ALEN];
/* EepSetPoint in the vendor driver */
u8 pwr_cal_values[E2P_CHANNEL_COUNT];
diff --git a/drivers/net/wireless/zd1211rw/zd_def.h b/drivers/net/wireless/zd1211rw/zd_def.h
index fb22f62cf1f3..deb99d1eaa77 100644
--- a/drivers/net/wireless/zd1211rw/zd_def.h
+++ b/drivers/net/wireless/zd1211rw/zd_def.h
@@ -23,6 +23,8 @@
#include <linux/device.h>
#include <linux/kernel.h>
+typedef u16 __nocast zd_addr_t;
+
#define dev_printk_f(level, dev, fmt, args...) \
dev_printk(level, dev, "%s() " fmt, __func__, ##args)
diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h
index 26b8298dff8c..c4f36d39642b 100644
--- a/drivers/net/wireless/zd1211rw/zd_ieee80211.h
+++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h
@@ -2,7 +2,6 @@
#define _ZD_IEEE80211_H
#include <net/ieee80211.h>
-#include "zd_types.h"
/* Additional definitions from the standards.
*/
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h
index 676b3734f1ed..a57732eb69e1 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.h
+++ b/drivers/net/wireless/zd1211rw/zd_rf.h
@@ -18,8 +18,6 @@
#ifndef _ZD_RF_H
#define _ZD_RF_H
-#include "zd_types.h"
-
#define UW2451_RF 0x2
#define UCHIP_RF 0x3
#define AL2230_RF 0x4
diff --git a/drivers/net/wireless/zd1211rw/zd_types.h b/drivers/net/wireless/zd1211rw/zd_types.h
deleted file mode 100644
index 0155a1584ed3..000000000000
--- a/drivers/net/wireless/zd1211rw/zd_types.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* zd_types.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ZD_TYPES_H
-#define _ZD_TYPES_H
-
-#include <linux/types.h>
-
-/* We have three register spaces mapped into the overall USB address space of
- * 64K words (16-bit values). There is the control register space of
- * double-word registers, the eeprom register space and the firmware register
- * space. The control register space is byte mapped, the others are word
- * mapped.
- *
- * For that reason, we are using byte offsets for control registers and word
- * offsets for everything else.
- */
-
-typedef u32 __nocast zd_addr_t;
-
-enum {
- ADDR_BASE_MASK = 0xff000000,
- ADDR_OFFSET_MASK = 0x0000ffff,
- ADDR_ZERO_MASK = 0x00ff0000,
- NULL_BASE = 0x00000000,
- USB_BASE = 0x01000000,
- CR_BASE = 0x02000000,
- CR_MAX_OFFSET = 0x0b30,
- E2P_BASE = 0x03000000,
- E2P_MAX_OFFSET = 0x007e,
- FW_BASE = 0x04000000,
- FW_MAX_OFFSET = 0x0005,
-};
-
-#define ZD_ADDR_BASE(addr) ((u32)(addr) & ADDR_BASE_MASK)
-#define ZD_OFFSET(addr) ((u32)(addr) & ADDR_OFFSET_MASK)
-
-#define ZD_ADDR(base, offset) \
- ((zd_addr_t)(((base) & ADDR_BASE_MASK) | ((offset) & ADDR_OFFSET_MASK)))
-
-#define ZD_NULL_ADDR ((zd_addr_t)0)
-#define USB_REG(offset) ZD_ADDR(USB_BASE, offset) /* word addressing */
-#define CTL_REG(offset) ZD_ADDR(CR_BASE, offset) /* byte addressing */
-#define E2P_REG(offset) ZD_ADDR(E2P_BASE, offset) /* word addressing */
-#define FW_REG(offset) ZD_ADDR(FW_BASE, offset) /* word addressing */
-
-static inline zd_addr_t zd_inc_word(zd_addr_t addr)
-{
- u32 base = ZD_ADDR_BASE(addr);
- u32 offset = ZD_OFFSET(addr);
-
- offset += base == CR_BASE ? 2 : 1;
-
- return base | offset;
-}
-
-#endif /* _ZD_TYPES_H */
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 605e96e74057..75ef55624d7f 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -58,6 +58,10 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{}
@@ -73,96 +77,6 @@ MODULE_DEVICE_TABLE(usb, usb_ids);
#define FW_ZD1211_PREFIX "zd1211/zd1211_"
#define FW_ZD1211B_PREFIX "zd1211/zd1211b_"
-/* register address handling */
-
-#ifdef DEBUG
-static int check_addr(struct zd_usb *usb, zd_addr_t addr)
-{
- u32 base = ZD_ADDR_BASE(addr);
- u32 offset = ZD_OFFSET(addr);
-
- if ((u32)addr & ADDR_ZERO_MASK)
- goto invalid_address;
- switch (base) {
- case USB_BASE:
- break;
- case CR_BASE:
- if (offset > CR_MAX_OFFSET) {
- dev_dbg(zd_usb_dev(usb),
- "CR offset %#010x larger than"
- " CR_MAX_OFFSET %#10x\n",
- offset, CR_MAX_OFFSET);
- goto invalid_address;
- }
- if (offset & 1) {
- dev_dbg(zd_usb_dev(usb),
- "CR offset %#010x is not a multiple of 2\n",
- offset);
- goto invalid_address;
- }
- break;
- case E2P_BASE:
- if (offset > E2P_MAX_OFFSET) {
- dev_dbg(zd_usb_dev(usb),
- "E2P offset %#010x larger than"
- " E2P_MAX_OFFSET %#010x\n",
- offset, E2P_MAX_OFFSET);
- goto invalid_address;
- }
- break;
- case FW_BASE:
- if (!usb->fw_base_offset) {
- dev_dbg(zd_usb_dev(usb),
- "ERROR: fw base offset has not been set\n");
- return -EAGAIN;
- }
- if (offset > FW_MAX_OFFSET) {
- dev_dbg(zd_usb_dev(usb),
- "FW offset %#10x is larger than"
- " FW_MAX_OFFSET %#010x\n",
- offset, FW_MAX_OFFSET);
- goto invalid_address;
- }
- break;
- default:
- dev_dbg(zd_usb_dev(usb),
- "address has unsupported base %#010x\n", addr);
- goto invalid_address;
- }
-
- return 0;
-invalid_address:
- dev_dbg(zd_usb_dev(usb),
- "ERROR: invalid address: %#010x\n", addr);
- return -EINVAL;
-}
-#endif /* DEBUG */
-
-static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr)
-{
- u32 base;
- u16 offset;
-
- base = ZD_ADDR_BASE(addr);
- offset = ZD_OFFSET(addr);
-
- ZD_ASSERT(check_addr(usb, addr) == 0);
-
- switch (base) {
- case CR_BASE:
- offset += CR_BASE_OFFSET;
- break;
- case E2P_BASE:
- offset += E2P_BASE_OFFSET;
- break;
- case FW_BASE:
- offset += usb->fw_base_offset;
- break;
- }
-
- return offset;
-}
-
/* USB device initialization */
static int request_fw_file(
@@ -295,14 +209,13 @@ static int handle_version_mismatch(struct usb_device *udev, u8 device_type,
if (r)
goto error;
- r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START_OFFSET,
- REBOOT);
+ r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT);
if (r)
goto error;
- offset = ((EEPROM_REGS_OFFSET + EEPROM_REGS_SIZE) * sizeof(u16));
+ offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16));
r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset,
- E2P_BASE_OFFSET + EEPROM_REGS_SIZE, REBOOT);
+ E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT);
/* At this point, the vendor driver downloads the whole firmware
* image, hacks around with version IDs, and uploads it again,
@@ -331,7 +244,7 @@ static int upload_firmware(struct usb_device *udev, u8 device_type)
if (r)
goto error;
- fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET);
+ fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET);
if (fw_bcdDevice != bcdDevice) {
dev_info(&udev->dev,
@@ -357,8 +270,7 @@ static int upload_firmware(struct usb_device *udev, u8 device_type)
if (r)
goto error;
- r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START_OFFSET,
- REBOOT);
+ r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT);
if (r) {
dev_err(&udev->dev,
"Could not upload firmware code uph. Error number %d\n",
@@ -858,7 +770,7 @@ static inline void init_usb_interrupt(struct zd_usb *usb)
spin_lock_init(&intr->lock);
intr->interval = int_urb_interval(zd_usb_to_usbdev(usb));
init_completion(&intr->read_regs.completion);
- intr->read_regs.cr_int_addr = cpu_to_le16(usb_addr(usb, CR_INTERRUPT));
+ intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT);
}
static inline void init_usb_rx(struct zd_usb *usb)
@@ -890,22 +802,6 @@ void zd_usb_init(struct zd_usb *usb, struct net_device *netdev,
init_usb_rx(usb);
}
-int zd_usb_init_hw(struct zd_usb *usb)
-{
- int r;
- struct zd_chip *chip = zd_usb_to_chip(usb);
-
- ZD_ASSERT(mutex_is_locked(&chip->mutex));
- r = zd_ioread16_locked(chip, &usb->fw_base_offset,
- USB_REG((u16)FW_BASE_ADDR_OFFSET));
- if (r)
- return r;
- dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n",
- usb->fw_base_offset);
-
- return 0;
-}
-
void zd_usb_clear(struct zd_usb *usb)
{
usb_set_intfdata(usb->intf, NULL);
@@ -1253,7 +1149,7 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
return -ENOMEM;
req->id = cpu_to_le16(USB_REQ_READ_REGS);
for (i = 0; i < count; i++)
- req->addr[i] = cpu_to_le16(usb_addr(usb, addresses[i]));
+ req->addr[i] = cpu_to_le16((u16)addresses[i]);
udev = zd_usb_to_usbdev(usb);
prepare_read_regs_int(usb);
@@ -1318,7 +1214,7 @@ int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
req->id = cpu_to_le16(USB_REQ_WRITE_REGS);
for (i = 0; i < count; i++) {
struct reg_data *rw = &req->reg_writes[i];
- rw->addr = cpu_to_le16(usb_addr(usb, ioreqs[i].addr));
+ rw->addr = cpu_to_le16((u16)ioreqs[i].addr);
rw->value = cpu_to_le16(ioreqs[i].value);
}
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h
index 317d37c36679..506ea6a74393 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.h
+++ b/drivers/net/wireless/zd1211rw/zd_usb.h
@@ -25,7 +25,6 @@
#include <linux/usb.h>
#include "zd_def.h"
-#include "zd_types.h"
enum devicetype {
DEVICE_ZD1211 = 0,
@@ -181,15 +180,14 @@ struct zd_usb_tx {
spinlock_t lock;
};
-/* Contains the usb parts. The structure doesn't require a lock, because intf
- * and fw_base_offset, will not be changed after initialization.
+/* Contains the usb parts. The structure doesn't require a lock because intf
+ * will not be changed after initialization.
*/
struct zd_usb {
struct zd_usb_interrupt intr;
struct zd_usb_rx rx;
struct zd_usb_tx tx;
struct usb_interface *intf;
- u16 fw_base_offset;
};
#define zd_usb_dev(usb) (&usb->intf->dev)
OpenPOWER on IntegriCloud