diff options
Diffstat (limited to 'drivers/net/wireless')
| -rw-r--r-- | drivers/net/wireless/airo_cs.c | 48 | ||||
| -rw-r--r-- | drivers/net/wireless/atmel_cs.c | 46 | ||||
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 23 | ||||
| -rw-r--r-- | drivers/net/wireless/netwave_cs.c | 88 | ||||
| -rw-r--r-- | drivers/net/wireless/orinoco/orinoco_cs.c | 27 | ||||
| -rw-r--r-- | drivers/net/wireless/orinoco/spectrum_cs.c | 54 | ||||
| -rw-r--r-- | drivers/net/wireless/wavelan_cs.c | 24 | ||||
| -rw-r--r-- | drivers/net/wireless/wl3501_cs.c | 67 |
8 files changed, 136 insertions, 241 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index d0593ed9170e..a1b84fc48afd 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -43,21 +43,6 @@ #include "airo.h" -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -static char *version = "$Revision: 1.2 $"; -#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args); -#else -#define DEBUG(n, args...) -#endif /*====================================================================*/ @@ -145,7 +130,7 @@ static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; - DEBUG(0, "airo_attach()\n"); + dev_dbg(&p_dev->dev, "airo_attach()\n"); /* Interrupt setup */ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; @@ -184,7 +169,7 @@ static int airo_probe(struct pcmcia_device *p_dev) static void airo_detach(struct pcmcia_device *link) { - DEBUG(0, "airo_detach(0x%p)\n", link); + dev_dbg(&link->dev, "airo_detach\n"); airo_release(link); @@ -204,9 +189,6 @@ static void airo_detach(struct pcmcia_device *link) ======================================================================*/ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int airo_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, cistpl_cftable_entry_t *dflt, @@ -291,11 +273,11 @@ static int airo_config(struct pcmcia_device *link) { local_info_t *dev; win_req_t *req; - int last_fn, last_ret; + int ret; dev = link->priv; - DEBUG(0, "airo_config(0x%p)\n", link); + dev_dbg(&link->dev, "airo_config\n"); req = kzalloc(sizeof(win_req_t), GFP_KERNEL); if (!req) @@ -315,8 +297,8 @@ static int airo_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - last_ret = pcmcia_loop_config(link, airo_cs_config_check, req); - if (last_ret) + ret = pcmcia_loop_config(link, airo_cs_config_check, req); + if (ret) goto failed; /* @@ -324,21 +306,25 @@ static int airo_config(struct pcmcia_device *link) handler to the interrupt, unless the 'Handler' member of the irq structure is initialized. */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + if (link->conf.Attributes & CONF_ENABLE_IRQ) { + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + } /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; ((local_info_t *)link->priv)->eth_dev = init_airo_card(link->irq.AssignedIRQ, link->io.BasePort1, 1, &handle_to_dev(link)); if (!((local_info_t *)link->priv)->eth_dev) - goto cs_failed; + goto failed; /* At this point, the dev_node_t structure(s) need to be @@ -368,8 +354,6 @@ static int airo_config(struct pcmcia_device *link) kfree(req); return 0; - cs_failed: - cs_error(link, last_fn, last_ret); failed: airo_release(link); kfree(req); @@ -386,7 +370,7 @@ static int airo_config(struct pcmcia_device *link) static void airo_release(struct pcmcia_device *link) { - DEBUG(0, "airo_release(0x%p)\n", link); + dev_dbg(&link->dev, "airo_release\n"); pcmcia_disable_device(link); } diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index ddaa859c3491..78385722a768 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -55,22 +55,6 @@ #include "atmel.h" -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ - -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -static char *version = "$Revision: 1.2 $"; -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); -#else -#define DEBUG(n, args...) -#endif /*====================================================================*/ @@ -155,7 +139,7 @@ static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; - DEBUG(0, "atmel_attach()\n"); + dev_dbg(&p_dev->dev, "atmel_attach()\n"); /* Interrupt setup */ p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING; @@ -194,7 +178,7 @@ static int atmel_probe(struct pcmcia_device *p_dev) static void atmel_detach(struct pcmcia_device *link) { - DEBUG(0, "atmel_detach(0x%p)\n", link); + dev_dbg(&link->dev, "atmel_detach\n"); atmel_release(link); @@ -209,9 +193,6 @@ static void atmel_detach(struct pcmcia_device *link) ======================================================================*/ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -275,13 +256,13 @@ static int atmel_config_check(struct pcmcia_device *p_dev, static int atmel_config(struct pcmcia_device *link) { local_info_t *dev; - int last_fn, last_ret; + int ret; struct pcmcia_device_id *did; dev = link->priv; did = dev_get_drvdata(&handle_to_dev(link)); - DEBUG(0, "atmel_config(0x%p)\n", link); + dev_dbg(&link->dev, "atmel_config\n"); /* In this loop, we scan the CIS for configuration table entries, @@ -303,20 +284,25 @@ static int atmel_config(struct pcmcia_device *link) handler to the interrupt, unless the 'Handler' member of the irq structure is initialized. */ - if (link->conf.Attributes & CONF_ENABLE_IRQ) - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + if (link->conf.Attributes & CONF_ENABLE_IRQ) { + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + } /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; if (link->irq.AssignedIRQ == 0) { printk(KERN_ALERT "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config."); - goto cs_failed; + goto failed; } ((local_info_t*)link->priv)->eth_dev = @@ -327,7 +313,7 @@ static int atmel_config(struct pcmcia_device *link) card_present, link); if (!((local_info_t*)link->priv)->eth_dev) - goto cs_failed; + goto failed; /* @@ -340,8 +326,6 @@ static int atmel_config(struct pcmcia_device *link) return 0; - cs_failed: - cs_error(link, last_fn, last_ret); failed: atmel_release(link); return -ENODEV; @@ -359,7 +343,7 @@ static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; - DEBUG(0, "atmel_release(0x%p)\n", link); + dev_dbg(&link->dev, "atmel_release\n"); if (dev) stop_atmel_card(dev); diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 31b60dd87bfe..ca3ab849ac03 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -510,10 +510,6 @@ static void prism2_detach(struct pcmcia_device *link) } -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - - /* run after a CARD_INSERTION event is received to configure the PCMCIA * socket and make the device available to the system */ @@ -605,7 +601,6 @@ static int prism2_config(struct pcmcia_device *link) struct hostap_interface *iface; local_info_t *local; int ret = 1; - int last_fn, last_ret; struct hostap_cs_priv *hw_priv; PDEBUG(DEBUG_FLOW, "prism2_config()\n"); @@ -617,13 +612,12 @@ static int prism2_config(struct pcmcia_device *link) } /* Look for an appropriate configuration table entry in the CIS */ - last_ret = pcmcia_loop_config(link, prism2_config_check, NULL); - if (last_ret) { + ret = pcmcia_loop_config(link, prism2_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } @@ -652,8 +646,9 @@ static int prism2_config(struct pcmcia_device *link) link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = prism2_interrupt; link->irq.Instance = dev; - CS_CHECK(RequestIRQ, - pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; } /* @@ -661,8 +656,9 @@ static int prism2_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; dev->irq = link->irq.AssignedIRQ; dev->base_addr = link->io.BasePort1; @@ -695,9 +691,6 @@ static int prism2_config(struct pcmcia_device *link) } return ret; - cs_failed: - cs_error(link, last_fn, last_ret); - failed: kfree(hw_priv); prism2_release((u_long)link); diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c index 9498b46c99a4..cbd85de0c601 100644 --- a/drivers/net/wireless/netwave_cs.c +++ b/drivers/net/wireless/netwave_cs.c @@ -145,23 +145,6 @@ static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */ static const unsigned int txConfKey = 0x02; /* Scramble data packets */ static const unsigned int txConfLoop = 0x01; /* Loopback mode */ -/* - All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If - you do not define PCMCIA_DEBUG at all, all the debug code will be - left out. If you compile with PCMCIA_DEBUG=0, the debug code will - be present but disabled -- but it can then be enabled for specific - modules at load time with a 'pc_debug=#' option to insmod. -*/ - -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -static char *version = -"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n"; -#else -#define DEBUG(n, args...) -#endif /*====================================================================*/ @@ -383,7 +366,7 @@ static int netwave_probe(struct pcmcia_device *link) struct net_device *dev; netwave_private *priv; - DEBUG(0, "netwave_attach()\n"); + dev_dbg(&link->dev, "netwave_attach()\n"); /* Initialize the struct pcmcia_device structure */ dev = alloc_etherdev(sizeof(netwave_private)); @@ -438,7 +421,7 @@ static void netwave_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; - DEBUG(0, "netwave_detach(0x%p)\n", link); + dev_dbg(&link->dev, "netwave_detach\n"); netwave_release(link); @@ -725,18 +708,15 @@ static const struct iw_handler_def netwave_handler_def = * */ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int netwave_pcmcia_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; netwave_private *priv = netdev_priv(dev); - int i, j, last_ret, last_fn; + int i, j, ret; win_req_t req; memreq_t mem; u_char __iomem *ramBase = NULL; - DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link); + dev_dbg(&link->dev, "netwave_pcmcia_config\n"); /* * Try allocating IO ports. This tries a few fixed addresses. @@ -749,22 +729,24 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { if (i == 0) break; } - if (i != 0) { - cs_error(link, RequestIO, i); + if (i != 0) goto failed; - } /* * Now allocate an interrupt line. Note that this does not * actually assign a handler to the interrupt. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* * This actually configures the PCMCIA socket -- setting up * the I/O windows and the interrupt mapping. */ - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* * Allocate a 32K memory window. Note that the struct pcmcia_device @@ -772,14 +754,18 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { * device needs several windows, you'll need to keep track of * the handles in your private data structure, dev->priv. */ - DEBUG(1, "Setting mem speed of %d\n", mem_speed); + dev_dbg(&link->dev, "Setting mem speed of %d\n", mem_speed); req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE; req.Base = 0; req.Size = 0x8000; req.AccessSpeed = mem_speed; - CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win)); + ret = pcmcia_request_window(&link, &req, &link->win); + if (ret) + goto failed; mem.CardOffset = 0x20000; mem.Page = 0; - CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem)); + ret = pcmcia_map_mem_page(link->win, &mem); + if (ret) + goto failed; /* Store base address of the common window frame */ ramBase = ioremap(req.Base, 0x8000); @@ -818,8 +804,6 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) { get_uint16(ramBase + NETWAVE_EREG_ARW+2)); return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: netwave_release(link); return -ENODEV; @@ -837,7 +821,7 @@ static void netwave_release(struct pcmcia_device *link) struct net_device *dev = link->priv; netwave_private *priv = netdev_priv(dev); - DEBUG(0, "netwave_release(0x%p)\n", link); + dev_dbg(&link->dev, "netwave_release\n"); pcmcia_disable_device(link); if (link->win) @@ -892,7 +876,7 @@ static void netwave_reset(struct net_device *dev) { u_char __iomem *ramBase = priv->ramBase; unsigned int iobase = dev->base_addr; - DEBUG(0, "netwave_reset: Done with hardware reset\n"); + pr_debug("netwave_reset: Done with hardware reset\n"); priv->timeoutCounter = 0; @@ -988,7 +972,7 @@ static int netwave_hw_xmit(unsigned char* data, int len, dev->stats.tx_bytes += len; - DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n", + pr_debug("Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n", readb(ramBase + NETWAVE_EREG_SPCQ), readb(ramBase + NETWAVE_EREG_SPU), readb(ramBase + NETWAVE_EREG_LIF), @@ -1000,7 +984,7 @@ static int netwave_hw_xmit(unsigned char* data, int len, MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2); DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4); - DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n", + pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n", TxFreeList, MaxData, DataOffset); /* Copy packet to the adapter fragment buffers */ @@ -1088,7 +1072,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) status = inb(iobase + NETWAVE_REG_ASR); if (!pcmcia_dev_present(link)) { - DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x " + pr_debug("netwave_interrupt: Interrupt with status 0x%x " "from removed or suspended card!\n", status); break; } @@ -1132,7 +1116,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) int txStatus; txStatus = readb(ramBase + NETWAVE_EREG_TSER); - DEBUG(3, "Transmit done. TSER = %x id %x\n", + pr_debug("Transmit done. TSER = %x id %x\n", txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1)); if (txStatus & 0x20) { @@ -1156,7 +1140,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) * TxGU and TxNOAP is set. (Those are the only ones * to set TxErr). */ - DEBUG(3, "netwave_interrupt: TxDN with error status %x\n", + pr_debug("netwave_interrupt: TxDN with error status %x\n", txStatus); /* Clear out TxGU, TxNOAP, TxErr and TxTrys */ @@ -1164,7 +1148,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4); ++dev->stats.tx_errors; } - DEBUG(3, "New status is TSER %x ASR %x\n", + pr_debug("New status is TSER %x ASR %x\n", readb(ramBase + NETWAVE_EREG_TSER), inb(iobase + NETWAVE_REG_ASR)); @@ -1172,7 +1156,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) } /* TxBA, this would trigger on all error packets received */ /* if (status & 0x01) { - DEBUG(4, "Transmit buffers available, %x\n", status); + pr_debug("Transmit buffers available, %x\n", status); } */ } @@ -1190,7 +1174,7 @@ static irqreturn_t netwave_interrupt(int irq, void* dev_id) */ static void netwave_watchdog(struct net_device *dev) { - DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name); + pr_debug("%s: netwave_watchdog: watchdog timer expired\n", dev->name); netwave_reset(dev); dev->trans_start = jiffies; netif_wake_queue(dev); @@ -1211,7 +1195,7 @@ static int netwave_rx(struct net_device *dev) int i; u_char *ptr; - DEBUG(3, "xinw_rx: Receiving ... \n"); + pr_debug("xinw_rx: Receiving ... \n"); /* Receive max 10 packets for now. */ for (i = 0; i < 10; i++) { @@ -1237,7 +1221,7 @@ static int netwave_rx(struct net_device *dev) skb = dev_alloc_skb(rcvLen+5); if (skb == NULL) { - DEBUG(1, "netwave_rx: Could not allocate an sk_buff of " + pr_debug("netwave_rx: Could not allocate an sk_buff of " "length %d\n", rcvLen); ++dev->stats.rx_dropped; /* Tell the adapter to skip the packet */ @@ -1279,7 +1263,7 @@ static int netwave_rx(struct net_device *dev) wait_WOC(iobase); writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0); writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); - DEBUG(3, "Packet reception ok\n"); + pr_debug("Packet reception ok\n"); } return 0; } @@ -1288,7 +1272,7 @@ static int netwave_open(struct net_device *dev) { netwave_private *priv = netdev_priv(dev); struct pcmcia_device *link = priv->p_dev; - DEBUG(1, "netwave_open: starting.\n"); + dev_dbg(&link->dev, "netwave_open: starting.\n"); if (!pcmcia_dev_present(link)) return -ENODEV; @@ -1305,7 +1289,7 @@ static int netwave_close(struct net_device *dev) { netwave_private *priv = netdev_priv(dev); struct pcmcia_device *link = priv->p_dev; - DEBUG(1, "netwave_close: finishing.\n"); + dev_dbg(&link->dev, "netwave_close: finishing.\n"); link->open--; netif_stop_queue(dev); @@ -1358,11 +1342,11 @@ static void set_multicast_list(struct net_device *dev) u_char rcvMode = 0; #ifdef PCMCIA_DEBUG - if (pc_debug > 2) { - static int old; + { + xstatic int old; if (old != dev->mc_count) { old = dev->mc_count; - DEBUG(0, "%s: setting Rx mode to %d addresses.\n", + pr_debug("%s: setting Rx mode to %d addresses.\n", dev->name, dev->mc_count); } } diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 38c1c9d2abb8..da626ec663d0 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -160,12 +160,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link) * device available to the system. */ -#define CS_CHECK(fn, ret) do { \ - last_fn = (fn); \ - if ((last_ret = (ret)) != 0) \ - goto cs_failed; \ -} while (0) - static int orinoco_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, cistpl_cftable_entry_t *dflt, @@ -240,7 +234,7 @@ orinoco_cs_config(struct pcmcia_device *link) struct orinoco_private *priv = link->priv; struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; - int last_fn, last_ret; + int ret; void __iomem *mem; /* @@ -257,13 +251,12 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); - if (last_ret) { + ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } @@ -272,14 +265,16 @@ orinoco_cs_config(struct pcmcia_device *link) * a handler to the interrupt, unless the 'Handler' member of * the irq structure is initialized. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); if (!mem) - goto cs_failed; + goto failed; hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); @@ -288,8 +283,9 @@ orinoco_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* Ok, we have the configuration, prepare to register the netdev */ card->node.major = card->node.minor = 0; @@ -315,9 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link) * net_device has been registered */ return 0; - cs_failed: - cs_error(link, last_fn, last_ret); - failed: orinoco_cs_release(link); return -ENODEV; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index c361310b885d..700010e9e346 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -73,9 +73,6 @@ static void spectrum_cs_release(struct pcmcia_device *link); #define HCR_MEM16 0x10 /* memory width bit, should be preserved */ -#define CS_CHECK(fn, ret) \ - do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - /* * Reset the card using configuration registers COR and CCSR. * If IDLE is 1, stop the firmware, so that it can be safely rewritten. @@ -83,7 +80,7 @@ static void spectrum_cs_release(struct pcmcia_device *link); static int spectrum_reset(struct pcmcia_device *link, int idle) { - int last_ret, last_fn; + int ret; conf_reg_t reg; u_int save_cor; @@ -95,23 +92,26 @@ spectrum_reset(struct pcmcia_device *link, int idle) reg.Function = 0; reg.Action = CS_READ; reg.Offset = CISREG_COR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; save_cor = reg.Value; /* Soft-Reset card */ reg.Action = CS_WRITE; reg.Offset = CISREG_COR; reg.Value = (save_cor | COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; udelay(1000); /* Read CCSR */ reg.Action = CS_READ; reg.Offset = CISREG_CCSR; - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; /* * Start or stop the firmware. Memory width bit should be @@ -120,21 +120,22 @@ spectrum_reset(struct pcmcia_device *link, int idle) reg.Action = CS_WRITE; reg.Offset = CISREG_CCSR; reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; udelay(1000); /* Restore original COR configuration index */ reg.Action = CS_WRITE; reg.Offset = CISREG_COR; reg.Value = (save_cor & ~COR_SOFT_RESET); - CS_CHECK(AccessConfigurationRegister, - pcmcia_access_configuration_register(link, ®)); + ret = pcmcia_access_configuration_register(link, ®); + if (ret) + goto failed; udelay(1000); return 0; -cs_failed: - cs_error(link, last_fn, last_ret); +failed: return -ENODEV; } @@ -307,7 +308,7 @@ spectrum_cs_config(struct pcmcia_device *link) struct orinoco_private *priv = link->priv; struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; - int last_fn, last_ret; + int ret; void __iomem *mem; /* @@ -324,13 +325,12 @@ spectrum_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); - if (last_ret) { + ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (ret) { if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - cs_error(link, RequestIO, last_ret); goto failed; } @@ -339,14 +339,16 @@ spectrum_cs_config(struct pcmcia_device *link) * a handler to the interrupt, unless the 'Handler' member of * the irq structure is initialized. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* We initialize the hermes structure before completing PCMCIA * configuration just in case the interrupt handler gets * called. */ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1); if (!mem) - goto cs_failed; + goto failed; hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); @@ -355,8 +357,9 @@ spectrum_cs_config(struct pcmcia_device *link) * the I/O windows and the interrupt mapping, and putting the * card and host interface into "Memory and IO" mode. */ - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; /* Ok, we have the configuration, prepare to register the netdev */ card->node.major = card->node.minor = 0; @@ -386,9 +389,6 @@ spectrum_cs_config(struct pcmcia_device *link) * net_device has been registered */ return 0; - cs_failed: - cs_error(link, last_fn, last_ret); - failed: spectrum_cs_release(link); return -ENODEV; diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index 431a20ec6db6..2fad4ac89827 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -3656,10 +3656,7 @@ wv_pcmcia_reset(struct net_device * dev) i = pcmcia_access_configuration_register(link, ®); if (i != 0) - { - cs_error(link, AccessConfigurationRegister, i); return FALSE; - } #ifdef DEBUG_CONFIG_INFO printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n", @@ -3670,19 +3667,13 @@ wv_pcmcia_reset(struct net_device * dev) reg.Value = reg.Value | COR_SW_RESET; i = pcmcia_access_configuration_register(link, ®); if (i != 0) - { - cs_error(link, AccessConfigurationRegister, i); return FALSE; - } reg.Action = CS_WRITE; reg.Value = COR_LEVEL_IRQ | COR_CONFIG; i = pcmcia_access_configuration_register(link, ®); if (i != 0) - { - cs_error(link, AccessConfigurationRegister, i); return FALSE; - } #ifdef DEBUG_CONFIG_TRACE printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name); @@ -3857,10 +3848,7 @@ wv_pcmcia_config(struct pcmcia_device * link) { i = pcmcia_request_io(link, &link->io); if (i != 0) - { - cs_error(link, RequestIO, i); break; - } /* * Now allocate an interrupt line. Note that this does not @@ -3868,10 +3856,7 @@ wv_pcmcia_config(struct pcmcia_device * link) */ i = pcmcia_request_irq(link, &link->irq); if (i != 0) - { - cs_error(link, RequestIRQ, i); break; - } /* * This actually configures the PCMCIA socket -- setting up @@ -3880,10 +3865,7 @@ wv_pcmcia_config(struct pcmcia_device * link) link->conf.ConfigIndex = 1; i = pcmcia_request_configuration(link, &link->conf); if (i != 0) - { - cs_error(link, RequestConfiguration, i); break; - } /* * Allocate a small memory window. Note that the struct pcmcia_device @@ -3896,10 +3878,7 @@ wv_pcmcia_config(struct pcmcia_device * link) req.AccessSpeed = mem_speed; i = pcmcia_request_window(&link, &req, &link->win); if (i != 0) - { - cs_error(link, RequestWindow, i); break; - } lp->mem = ioremap(req.Base, req.Size); dev->mem_start = (u_long)lp->mem; @@ -3908,10 +3887,7 @@ wv_pcmcia_config(struct pcmcia_device * link) mem.CardOffset = 0; mem.Page = 0; i = pcmcia_map_mem_page(link->win, &mem); if (i != 0) - { - cs_error(link, MapMemPage, i); break; - } /* Feed device with this info... */ dev->irq = link->irq.AssignedIRQ; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index 4f1e0cfe609b..7e8e269b4cb6 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -67,23 +67,7 @@ /* For rough constant delay */ #define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); } -/* - * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not - * define PCMCIA_DEBUG at all, all the debug code will be left out. If you - * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled -- - * but it can then be enabled for specific modules at load time with a - * 'pc_debug=#' option to insmod. - */ -#define PCMCIA_DEBUG 0 -#ifdef PCMCIA_DEBUG -static int pc_debug = PCMCIA_DEBUG; -module_param(pc_debug, int, 0); -#define dprintk(n, format, args...) \ - { if (pc_debug > (n)) \ - printk(KERN_INFO "%s: " format "\n", __func__ , ##args); } -#else -#define dprintk(n, format, args...) -#endif + #define wl3501_outb(a, b) { outb(a, b); slow_down_io(); } #define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); } @@ -684,10 +668,10 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) int matchflag = 0; struct wl3501_scan_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) { - dprintk(3, "success"); + pr_debug("success"); if ((this->net_type == IW_MODE_INFRA && (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) || (this->net_type == IW_MODE_ADHOC && @@ -722,7 +706,7 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) } } } else if (sig.status == WL3501_STATUS_TIMEOUT) { - dprintk(3, "timeout"); + pr_debug("timeout"); this->join_sta_bss = 0; for (i = this->join_sta_bss; i < this->bss_cnt; i++) if (!wl3501_mgmt_join(this, i)) @@ -879,7 +863,7 @@ static int wl3501_mgmt_auth(struct wl3501_card *this) .timeout = 1000, }; - dprintk(3, "entry"); + pr_debug("entry"); memcpy(sig.mac_addr, this->bssid, ETH_ALEN); return wl3501_esbq_exec(this, &sig, sizeof(sig)); } @@ -893,7 +877,7 @@ static int wl3501_mgmt_association(struct wl3501_card *this) .cap_info = this->cap_info, }; - dprintk(3, "entry"); + pr_debug("entry"); memcpy(sig.mac_addr, this->bssid, ETH_ALEN); return wl3501_esbq_exec(this, &sig, sizeof(sig)); } @@ -903,7 +887,7 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr) struct wl3501_card *this = netdev_priv(dev); struct wl3501_join_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) { if (this->net_type == IW_MODE_INFRA) { @@ -962,7 +946,7 @@ static inline void wl3501_md_confirm_interrupt(struct net_device *dev, { struct wl3501_md_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); wl3501_free_tx_buffer(this, sig.data); if (netif_queue_stopped(dev)) @@ -1017,7 +1001,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev, static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this, u16 addr, void *sig, int size) { - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &this->sig_get_confirm, sizeof(this->sig_get_confirm)); wake_up(&this->wait); @@ -1029,7 +1013,7 @@ static inline void wl3501_start_confirm_interrupt(struct net_device *dev, { struct wl3501_start_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) netif_wake_queue(dev); @@ -1041,7 +1025,7 @@ static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev, struct wl3501_card *this = netdev_priv(dev); struct wl3501_assoc_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) @@ -1053,7 +1037,7 @@ static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this, { struct wl3501_auth_confirm sig; - dprintk(3, "entry"); + pr_debug("entry"); wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); if (sig.status == WL3501_STATUS_SUCCESS) @@ -1069,7 +1053,7 @@ static inline void wl3501_rx_interrupt(struct net_device *dev) u8 sig_id; struct wl3501_card *this = netdev_priv(dev); - dprintk(3, "entry"); + pr_debug("entry"); loop: morepkts = 0; if (!wl3501_esbq_confirm(this)) @@ -1302,7 +1286,7 @@ static int wl3501_reset(struct net_device *dev) wl3501_ack_interrupt(this); wl3501_unblock_interrupt(this); wl3501_mgmt_scan(this, 100); - dprintk(1, "%s: device reset", dev->name); + pr_debug("%s: device reset", dev->name); rc = 0; out: return rc; @@ -1376,7 +1360,7 @@ static int wl3501_open(struct net_device *dev) link->open++; /* Initial WL3501 firmware */ - dprintk(1, "%s: Initialize WL3501 firmware...", dev->name); + pr_debug("%s: Initialize WL3501 firmware...", dev->name); if (wl3501_init_firmware(this)) goto fail; /* Initial device variables */ @@ -1388,7 +1372,7 @@ static int wl3501_open(struct net_device *dev) wl3501_unblock_interrupt(this); wl3501_mgmt_scan(this, 100); rc = 0; - dprintk(1, "%s: WL3501 opened", dev->name); + pr_debug("%s: WL3501 opened", dev->name); printk(KERN_INFO "%s: Card Name: %s\n" "%s: Firmware Date: %s\n", dev->name, this->card_name, @@ -1945,9 +1929,6 @@ out_link: return -ENOMEM; } -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - /** * wl3501_config - configure the PCMCIA socket and make eth device available * @link - FILL_IN @@ -1959,7 +1940,7 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; - int i = 0, j, last_fn, last_ret; + int i = 0, j, ret; struct wl3501_card *this; /* Try allocating IO ports. This tries a few fixed addresses. If you @@ -1975,20 +1956,22 @@ static int wl3501_config(struct pcmcia_device *link) if (i == 0) break; } - if (i != 0) { - cs_error(link, RequestIO, i); + if (i != 0) goto failed; - } /* Now allocate an interrupt line. Note that this does not actually * assign a handler to the interrupt. */ - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; /* This actually configures the PCMCIA socket -- setting up the I/O * windows and the interrupt mapping. */ - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; dev->irq = link->irq.AssignedIRQ; dev->base_addr = link->io.BasePort1; @@ -2041,8 +2024,6 @@ static int wl3501_config(struct pcmcia_device *link) netif_start_queue(dev); return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: wl3501_release(link); return -ENODEV; |
