diff options
Diffstat (limited to 'drivers/net/wireless/ti/wl1251/io.c')
| -rw-r--r-- | drivers/net/wireless/ti/wl1251/io.c | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/drivers/net/wireless/ti/wl1251/io.c b/drivers/net/wireless/ti/wl1251/io.c new file mode 100644 index 000000000000..cdcadbf6ac2c --- /dev/null +++ b/drivers/net/wireless/ti/wl1251/io.c @@ -0,0 +1,194 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "wl1251.h" +#include "reg.h" +#include "io.h" + +/* FIXME: this is static data nowadays and the table can be removed */ +static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = { + [ACX_REG_INTERRUPT_TRIG] = (REGISTERS_BASE + 0x0474), + [ACX_REG_INTERRUPT_TRIG_H] = (REGISTERS_BASE + 0x0478), + [ACX_REG_INTERRUPT_MASK] = (REGISTERS_BASE + 0x0494), + [ACX_REG_HINT_MASK_SET] = (REGISTERS_BASE + 0x0498), + [ACX_REG_HINT_MASK_CLR] = (REGISTERS_BASE + 0x049C), + [ACX_REG_INTERRUPT_NO_CLEAR] = (REGISTERS_BASE + 0x04B0), + [ACX_REG_INTERRUPT_CLEAR] = (REGISTERS_BASE + 0x04A4), + [ACX_REG_INTERRUPT_ACK] = (REGISTERS_BASE + 0x04A8), + [ACX_REG_SLV_SOFT_RESET] = (REGISTERS_BASE + 0x0000), + [ACX_REG_EE_START] = (REGISTERS_BASE + 0x080C), + [ACX_REG_ECPU_CONTROL] = (REGISTERS_BASE + 0x0804) +}; + +static int wl1251_translate_reg_addr(struct wl1251 *wl, int addr) +{ + /* If the address is lower than REGISTERS_BASE, it means that this is + * a chip-specific register address, so look it up in the registers + * table */ + if (addr < REGISTERS_BASE) { + /* Make sure we don't go over the table */ + if (addr >= ACX_REG_TABLE_LEN) { + wl1251_error("address out of range (%d)", addr); + return -EINVAL; + } + addr = wl1251_io_reg_table[addr]; + } + + return addr - wl->physical_reg_addr + wl->virtual_reg_addr; +} + +static int wl1251_translate_mem_addr(struct wl1251 *wl, int addr) +{ + return addr - wl->physical_mem_addr + wl->virtual_mem_addr; +} + +void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len) +{ + int physical; + + physical = wl1251_translate_mem_addr(wl, addr); + + wl->if_ops->read(wl, physical, buf, len); +} + +void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len) +{ + int physical; + + physical = wl1251_translate_mem_addr(wl, addr); + + wl->if_ops->write(wl, physical, buf, len); +} + +u32 wl1251_mem_read32(struct wl1251 *wl, int addr) +{ + return wl1251_read32(wl, wl1251_translate_mem_addr(wl, addr)); +} + +void wl1251_mem_write32(struct wl1251 *wl, int addr, u32 val) +{ + wl1251_write32(wl, wl1251_translate_mem_addr(wl, addr), val); +} + +u32 wl1251_reg_read32(struct wl1251 *wl, int addr) +{ + return wl1251_read32(wl, wl1251_translate_reg_addr(wl, addr)); +} + +void wl1251_reg_write32(struct wl1251 *wl, int addr, u32 val) +{ + wl1251_write32(wl, wl1251_translate_reg_addr(wl, addr), val); +} + +/* Set the partitions to access the chip addresses. + * + * There are two VIRTUAL partitions (the memory partition and the + * registers partition), which are mapped to two different areas of the + * PHYSICAL (hardware) memory. This function also makes other checks to + * ensure that the partitions are not overlapping. In the diagram below, the + * memory partition comes before the register partition, but the opposite is + * also supported. + * + * PHYSICAL address + * space + * + * | | + * ...+----+--> mem_start + * VIRTUAL address ... | | + * space ... | | [PART_0] + * ... | | + * 0x00000000 <--+----+... ...+----+--> mem_start + mem_size + * | | ... | | + * |MEM | ... | | + * | | ... | | + * part_size <--+----+... | | {unused area) + * | | ... | | + * |REG | ... | | + * part_size | | ... | | + * + <--+----+... ...+----+--> reg_start + * reg_size ... | | + * ... | | [PART_1] + * ... | | + * ...+----+--> reg_start + reg_size + * | | + * + */ +void wl1251_set_partition(struct wl1251 *wl, + u32 mem_start, u32 mem_size, + u32 reg_start, u32 reg_size) +{ + struct wl1251_partition partition[2]; + + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + + /* Make sure that the two partitions together don't exceed the + * address range */ + if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) { + wl1251_debug(DEBUG_SPI, "Total size exceeds maximum virtual" + " address range. Truncating partition[0]."); + mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size; + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } + + if ((mem_start < reg_start) && + ((mem_start + mem_size) > reg_start)) { + /* Guarantee that the memory partition doesn't overlap the + * registers partition */ + wl1251_debug(DEBUG_SPI, "End of partition[0] is " + "overlapping partition[1]. Adjusted."); + mem_size = reg_start - mem_start; + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } else if ((reg_start < mem_start) && + ((reg_start + reg_size) > mem_start)) { + /* Guarantee that the register partition doesn't overlap the + * memory partition */ + wl1251_debug(DEBUG_SPI, "End of partition[1] is" + " overlapping partition[0]. Adjusted."); + reg_size = mem_start - reg_start; + wl1251_debug(DEBUG_SPI, "mem_start %08X mem_size %08X", + mem_start, mem_size); + wl1251_debug(DEBUG_SPI, "reg_start %08X reg_size %08X", + reg_start, reg_size); + } + + partition[0].start = mem_start; + partition[0].size = mem_size; + partition[1].start = reg_start; + partition[1].size = reg_size; + + wl->physical_mem_addr = mem_start; + wl->physical_reg_addr = reg_start; + + wl->virtual_mem_addr = 0; + wl->virtual_reg_addr = mem_size; + + wl->if_ops->write(wl, HW_ACCESS_PART0_SIZE_ADDR, partition, + sizeof(partition)); +} |
