diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00crypto.c | 6 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00dev.c | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00lib.h | 45 | ||||
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.c | 99 |
4 files changed, 116 insertions, 44 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c index 30fbd3bbe08b..de36837dcf86 100644 --- a/drivers/net/wireless/rt2x00/rt2x00crypto.c +++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c @@ -154,7 +154,7 @@ void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length) skbdesc->flags &= ~SKBDESC_IV_STRIPPED; } -void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int header_length, struct rxdone_entry_desc *rxdesc) { @@ -199,7 +199,7 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, * move the header more then iv_len since we must * make room for the payload move as well. */ - if (l2pad) { + if (rxdesc->dev_flags & RXDONE_L2PAD) { skb_push(skb, iv_len - align); skb_put(skb, icv_len); @@ -230,7 +230,7 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, * Move payload for alignment purposes. Note that * this is only needed when no l2 padding is present. */ - if (!l2pad) { + if (!(rxdesc->dev_flags & RXDONE_L2PAD)) { memmove(skb->data + transfer, skb->data + transfer + align, payload_len); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 0647e514dde1..71761b343839 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -217,7 +217,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * Remove L2 padding which was added during */ if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags)) - rt2x00queue_payload_align(entry->skb, true, header_length); + rt2x00queue_remove_l2pad(entry->skb, header_length); /* * If the IV/EIV data was stripped from the frame before it was @@ -364,7 +364,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; unsigned int header_length; - bool l2pad; int rate_idx; /* * Allocate a new sk_buffer. If no new buffer available, drop the @@ -393,7 +392,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, * aligned on a 4 byte boundary. */ header_length = ieee80211_get_hdrlen_from_skb(entry->skb); - l2pad = !!(rxdesc.dev_flags & RXDONE_L2PAD); /* * Hardware might have stripped the IV/EIV/ICV data, @@ -403,10 +401,12 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, */ if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && (rxdesc.flags & RX_FLAG_IV_STRIPPED)) - rt2x00crypto_rx_insert_iv(entry->skb, l2pad, header_length, + rt2x00crypto_rx_insert_iv(entry->skb, header_length, &rxdesc); + else if (rxdesc.dev_flags & RXDONE_L2PAD) + rt2x00queue_remove_l2pad(entry->skb, header_length); else - rt2x00queue_payload_align(entry->skb, l2pad, header_length); + rt2x00queue_align_payload(entry->skb, header_length); /* * Check if the frame was received using HT. In that case, diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index eeb2881e818e..5462cb5ad994 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -120,21 +120,42 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); /** - * rt2x00queue_payload_align - Align 802.11 payload to 4-byte boundary + * rt2x00queue_align_frame - Align 802.11 frame to 4-byte boundary + * @skb: The skb to align + * + * Align the start of the 802.11 frame to a 4-byte boundary, this could + * mean the payload is not aligned properly though. + */ +void rt2x00queue_align_frame(struct sk_buff *skb); + +/** + * rt2x00queue_align_payload - Align 802.11 payload to 4-byte boundary + * @skb: The skb to align + * @header_length: Length of 802.11 header + * + * Align the 802.11 payload to a 4-byte boundary, this could + * mean the header is not aligned properly though. + */ +void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length); + +/** + * rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary + * @skb: The skb to align + * @header_length: Length of 802.11 header + * + * Apply L2 padding to align both header and payload to 4-byte boundary + */ +void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length); + +/** + * rt2x00queue_insert_l2pad - Remove L2 padding from 802.11 frame * @skb: The skb to align - * @l2pad: Should L2 padding be used * @header_length: Length of 802.11 header * - * This function prepares the @skb to be send to the device or mac80211. - * If @l2pad is set to true padding will occur between the 802.11 header - * and payload. Otherwise the padding will be done in front of the 802.11 - * header. - * When @l2pad is set the function will check for the &SKBDESC_L2_PADDED - * flag in &skb_frame_desc. If that flag is set, the padding is removed - * and the flag cleared. Otherwise the padding is added and the flag is set. + * Remove L2 padding used to align both header and payload to 4-byte boundary, + * by removing the L2 padding the header will no longer be 4-byte aligned. */ -void rt2x00queue_payload_align(struct sk_buff *skb, - bool l2pad, unsigned int header_length); +void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length); /** * rt2x00queue_write_tx_frame - Write TX frame to hardware @@ -324,7 +345,7 @@ void rt2x00crypto_tx_copy_iv(struct sk_buff *skb, void rt2x00crypto_tx_remove_iv(struct sk_buff *skb, struct txentry_desc *txdesc); void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length); -void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad, +void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int header_length, struct rxdone_entry_desc *rxdesc); #else diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 06af823efd83..577029efe320 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -148,35 +148,89 @@ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) dev_kfree_skb_any(skb); } -void rt2x00queue_payload_align(struct sk_buff *skb, - bool l2pad, unsigned int header_length) +void rt2x00queue_align_frame(struct sk_buff *skb) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); unsigned int frame_length = skb->len; - unsigned int align = ALIGN_SIZE(skb, header_length); + unsigned int align = ALIGN_SIZE(skb, 0); if (!align) return; - if (l2pad) { - if (skbdesc->flags & SKBDESC_L2_PADDED) { - /* Remove L2 padding */ - memmove(skb->data + align, skb->data, header_length); - skb_pull(skb, align); - skbdesc->flags &= ~SKBDESC_L2_PADDED; - } else { - /* Add L2 padding */ - skb_push(skb, align); - memmove(skb->data, skb->data + align, header_length); - skbdesc->flags |= SKBDESC_L2_PADDED; - } + skb_push(skb, align); + memmove(skb->data, skb->data + align, frame_length); + skb_trim(skb, frame_length); +} + +void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_lengt) +{ + unsigned int frame_length = skb->len; + unsigned int align = ALIGN_SIZE(skb, header_lengt); + + if (!align) + return; + + skb_push(skb, align); + memmove(skb->data, skb->data + align, frame_length); + skb_trim(skb, frame_length); +} + +void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int frame_length = skb->len; + unsigned int header_align = ALIGN_SIZE(skb, 0); + unsigned int payload_align = ALIGN_SIZE(skb, header_length); + unsigned int l2pad = 4 - (payload_align - header_align); + + if (header_align == payload_align) { + /* + * Both header and payload must be moved the same + * amount of bytes to align them properly. This means + * we don't use the L2 padding but just move the entire + * frame. + */ + rt2x00queue_align_frame(skb); + } else if (!payload_align) { + /* + * Simple L2 padding, only the header needs to be moved, + * the payload is already properly aligned. + */ + skb_push(skb, header_align); + memmove(skb->data, skb->data + header_align, frame_length); + skbdesc->flags |= SKBDESC_L2_PADDED; } else { - /* Generic payload alignment to 4-byte boundary */ - skb_push(skb, align); - memmove(skb->data, skb->data + align, frame_length); + /* + * + * Complicated L2 padding, both header and payload need + * to be moved. By default we only move to the start + * of the buffer, so our header alignment needs to be + * increased if there is not enough room for the header + * to be moved. + */ + if (payload_align > header_align) + header_align += 4; + + skb_push(skb, header_align); + memmove(skb->data, skb->data + header_align, header_length); + memmove(skb->data + header_length + l2pad, + skb->data + header_length + l2pad + header_align, + frame_length - header_length); + skbdesc->flags |= SKBDESC_L2_PADDED; } } +void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + unsigned int l2pad = 4 - (header_length & 3); + + if (!l2pad || (skbdesc->flags & SKBDESC_L2_PADDED)) + return; + + memmove(skb->data + l2pad, skb->data, header_length); + skb_pull(skb, l2pad); +} + static void rt2x00queue_create_tx_descriptor_seq(struct queue_entry *entry, struct txentry_desc *txdesc) { @@ -456,18 +510,15 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) /* * When DMA allocation is required we should guarentee to the * driver that the DMA is aligned to a 4-byte boundary. - * Aligning the header to this boundary can be done by calling - * rt2x00queue_payload_align with the header length of 0. * However some drivers require L2 padding to pad the payload * rather then the header. This could be a requirement for * PCI and USB devices, while header alignment only is valid * for PCI devices. */ if (test_bit(DRIVER_REQUIRE_L2PAD, &queue->rt2x00dev->flags)) - rt2x00queue_payload_align(entry->skb, true, - txdesc.header_length); + rt2x00queue_insert_l2pad(entry->skb, txdesc.header_length); else if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) - rt2x00queue_payload_align(entry->skb, false, 0); + rt2x00queue_align_frame(entry->skb); /* * It could be possible that the queue was corrupted and this |
