diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
20 files changed, 400 insertions, 98 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 329f3283697b..137a24e520da 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1368,8 +1368,10 @@ static void rt2400pci_tbtt_tasklet(unsigned long data) static void rt2400pci_rxdone_tasklet(unsigned long data) { struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00pci_rxdone(rt2x00dev); - rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); + if (rt2x00pci_rxdone(rt2x00dev)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); + else + rt2400pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); } static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 58277878889e..198fc0a0d77c 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1500,8 +1500,10 @@ static void rt2500pci_tbtt_tasklet(unsigned long data) static void rt2500pci_rxdone_tasklet(unsigned long data) { struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00pci_rxdone(rt2x00dev); - rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); + if (rt2x00pci_rxdone(rt2x00dev)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); + else + rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE); } static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 979fe6596a2d..eac788160f55 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1796,7 +1796,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_COPY_IV, &rt2x00dev->flags); } - __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SW_SEQNO, &rt2x00dev->flags); /* @@ -1910,13 +1909,10 @@ static struct usb_device_id rt2500usb_device_table[] = { /* Belkin */ { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Cisco Systems */ { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) }, - /* CNet */ - { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Conceptronic */ { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) }, /* D-LINK */ @@ -1939,7 +1935,6 @@ static struct usb_device_id rt2500usb_device_table[] = { /* Ralink */ { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) }, - { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) }, { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) }, /* Sagem */ { USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) }, diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 8fbc5fa965e0..ce2010952886 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -2104,6 +2104,59 @@ struct mac_iveiv_entry { #define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) /* + * EEPROM temperature compensation boundaries 802.11BG + * MINUS4: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -4) + * MINUS3: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -3) + */ +#define EEPROM_TSSI_BOUND_BG1 0x0037 +#define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * MINUS2: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -2) + * MINUS1: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -1) + */ +#define EEPROM_TSSI_BOUND_BG2 0x0038 +#define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * REF: Reference TSSI value, no tx power changes needed + * PLUS1: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 1) + */ +#define EEPROM_TSSI_BOUND_BG3 0x0039 +#define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * PLUS2: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 2) + * PLUS3: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 3) + */ +#define EEPROM_TSSI_BOUND_BG4 0x003a +#define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11BG + * PLUS4: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 4) + * AGC_STEP: Temperature compensation step. + */ +#define EEPROM_TSSI_BOUND_BG5 0x003b +#define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00) + +/* * EEPROM TXPOWER 802.11A */ #define EEPROM_TXPOWER_A1 0x003c @@ -2113,6 +2166,59 @@ struct mac_iveiv_entry { #define EEPROM_TXPOWER_A_2 FIELD16(0xff00) /* + * EEPROM temperature compensation boundaries 802.11A + * MINUS4: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -4) + * MINUS3: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -3) + */ +#define EEPROM_TSSI_BOUND_A1 0x006a +#define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * MINUS2: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -2) + * MINUS1: If the actual TSSI is below this boundary, tx power needs to be + * reduced by (agc_step * -1) + */ +#define EEPROM_TSSI_BOUND_A2 0x006b +#define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * REF: Reference TSSI value, no tx power changes needed + * PLUS1: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 1) + */ +#define EEPROM_TSSI_BOUND_A3 0x006c +#define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * PLUS2: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 2) + * PLUS3: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 3) + */ +#define EEPROM_TSSI_BOUND_A4 0x006d +#define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00) + +/* + * EEPROM temperature compensation boundaries 802.11A + * PLUS4: If the actual TSSI is above this boundary, tx power needs to be + * increased by (agc_step * 4) + * AGC_STEP: Temperature compensation step. + */ +#define EEPROM_TSSI_BOUND_A5 0x006e +#define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff) +#define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00) + +/* * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode */ #define EEPROM_TXPOWER_BYRATE 0x006f diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index dbf74d07d947..6331c61957a3 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -687,6 +687,9 @@ void rt2800_txdone_entry(struct queue_entry *entry, u32 status) mcs = real_mcs; } + if (aggr == 1 || ampdu == 1) + __set_bit(TXDONE_AMPDU, &txdesc.flags); + /* * Ralink has a retry mechanism using a global fallback * table. We setup this fallback table to try the immediate @@ -1813,17 +1816,131 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, ®); } +static int rt2800_get_gain_calibration_delta(struct rt2x00_dev *rt2x00dev) +{ + u8 tssi_bounds[9]; + u8 current_tssi; + u16 eeprom; + u8 step; + int i; + + /* + * Read TSSI boundaries for temperature compensation from + * the EEPROM. + * + * Array idx 0 1 2 3 4 5 6 7 8 + * Matching Delta value -4 -3 -2 -1 0 +1 +2 +3 +4 + * Example TSSI bounds 0xF0 0xD0 0xB5 0xA0 0x88 0x45 0x25 0x15 0x00 + */ + if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) { + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG1, &eeprom); + tssi_bounds[0] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG1_MINUS4); + tssi_bounds[1] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG1_MINUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG2, &eeprom); + tssi_bounds[2] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG2_MINUS2); + tssi_bounds[3] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG2_MINUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG3, &eeprom); + tssi_bounds[4] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG3_REF); + tssi_bounds[5] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG3_PLUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG4, &eeprom); + tssi_bounds[6] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG4_PLUS2); + tssi_bounds[7] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG4_PLUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_BG5, &eeprom); + tssi_bounds[8] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG5_PLUS4); + + step = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_BG5_AGC_STEP); + } else { + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A1, &eeprom); + tssi_bounds[0] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A1_MINUS4); + tssi_bounds[1] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A1_MINUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A2, &eeprom); + tssi_bounds[2] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A2_MINUS2); + tssi_bounds[3] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A2_MINUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A3, &eeprom); + tssi_bounds[4] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A3_REF); + tssi_bounds[5] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A3_PLUS1); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A4, &eeprom); + tssi_bounds[6] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A4_PLUS2); + tssi_bounds[7] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A4_PLUS3); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_TSSI_BOUND_A5, &eeprom); + tssi_bounds[8] = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A5_PLUS4); + + step = rt2x00_get_field16(eeprom, + EEPROM_TSSI_BOUND_A5_AGC_STEP); + } + + /* + * Check if temperature compensation is supported. + */ + if (tssi_bounds[4] == 0xff) + return 0; + + /* + * Read current TSSI (BBP 49). + */ + rt2800_bbp_read(rt2x00dev, 49, ¤t_tssi); + + /* + * Compare TSSI value (BBP49) with the compensation boundaries + * from the EEPROM and increase or decrease tx power. + */ + for (i = 0; i <= 3; i++) { + if (current_tssi > tssi_bounds[i]) + break; + } + + if (i == 4) { + for (i = 8; i >= 5; i--) { + if (current_tssi < tssi_bounds[i]) + break; + } + } + + return (i - 4) * step; +} + static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev, enum ieee80211_band band) { u16 eeprom; u8 comp_en; u8 comp_type; - int comp_value; + int comp_value = 0; rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom); - if (eeprom == 0xffff) + /* + * HT40 compensation not required. + */ + if (eeprom == 0xffff || + !test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) return 0; if (band == IEEE80211_BAND_2GHZ) { @@ -1853,11 +1970,9 @@ static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev, return comp_value; } -static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev, - int is_rate_b, - enum ieee80211_band band, - int power_level, - u8 txpower) +static u8 rt2800_compensate_txpower(struct rt2x00_dev *rt2x00dev, int is_rate_b, + enum ieee80211_band band, int power_level, + u8 txpower, int delta) { u32 reg; u16 eeprom; @@ -1865,14 +1980,10 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev, u8 eirp_txpower; u8 eirp_txpower_criterion; u8 reg_limit; - int bw_comp = 0; if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b)) return txpower; - if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) - bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band); - if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) { /* * Check if eirp txpower exceed txpower_limit. @@ -1895,18 +2006,19 @@ static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev, EEPROM_EIRP_MAX_TX_POWER_5GHZ); eirp_txpower = eirp_txpower_criterion + (txpower - criterion) + - (is_rate_b ? 4 : 0) + bw_comp; + (is_rate_b ? 4 : 0) + delta; reg_limit = (eirp_txpower > power_level) ? (eirp_txpower - power_level) : 0; } else reg_limit = 0; - return txpower + bw_comp - reg_limit; + return txpower + delta - reg_limit; } static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, - struct ieee80211_conf *conf) + enum ieee80211_band band, + int power_level) { u8 txpower; u16 eeprom; @@ -1914,8 +2026,17 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, u32 reg; u8 r1; u32 offset; - enum ieee80211_band band = conf->channel->band; - int power_level = conf->power_level; + int delta; + + /* + * Calculate HT40 compensation delta + */ + delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); + + /* + * calculate temperature compensation delta + */ + delta += rt2800_get_gain_calibration_delta(rt2x00dev); /* * set to normal bbp tx power control mode: +/- 0dBm @@ -1944,8 +2065,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE0, txpower); /* @@ -1955,8 +2076,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE1, txpower); /* @@ -1966,8 +2087,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE2, txpower); /* @@ -1977,8 +2098,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE3, txpower); /* read the next four txpower values */ @@ -1993,8 +2114,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE0); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE4, txpower); /* @@ -2004,8 +2125,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE1); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE5, txpower); /* @@ -2015,8 +2136,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE2); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE6, txpower); /* @@ -2026,8 +2147,8 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, */ txpower = rt2x00_get_field16(eeprom, EEPROM_TXPOWER_BYRATE_RATE3); - txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band, - power_level, txpower); + txpower = rt2800_compensate_txpower(rt2x00dev, is_rate_b, band, + power_level, txpower, delta); rt2x00_set_field32(®, TX_PWR_CFG_RATE7, txpower); rt2800_register_write(rt2x00dev, offset, reg); @@ -2037,6 +2158,13 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev, } } +void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev) +{ + rt2800_config_txpower(rt2x00dev, rt2x00dev->curr_band, + rt2x00dev->tx_power); +} +EXPORT_SYMBOL_GPL(rt2800_gain_calibration); + static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_conf *libconf) { @@ -2090,10 +2218,12 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev, if (flags & IEEE80211_CONF_CHANGE_CHANNEL) { rt2800_config_channel(rt2x00dev, libconf->conf, &libconf->rf, &libconf->channel); - rt2800_config_txpower(rt2x00dev, libconf->conf); + rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band, + libconf->conf->power_level); } if (flags & IEEE80211_CONF_CHANGE_POWER) - rt2800_config_txpower(rt2x00dev, libconf->conf); + rt2800_config_txpower(rt2x00dev, libconf->conf->channel->band, + libconf->conf->power_level); if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS) rt2800_config_retry_limit(rt2x00dev, libconf); if (flags & IEEE80211_CONF_CHANGE_PS) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 0c92d86a36f4..f2d15941c71a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -181,6 +181,7 @@ void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual); void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual, const u32 count); +void rt2800_gain_calibration(struct rt2x00_dev *rt2x00dev); int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev); void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 808073aa9dcc..adc3534254df 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -717,12 +717,13 @@ static void rt2800pci_wakeup(struct rt2x00_dev *rt2x00dev) rt2800_config(rt2x00dev, &libconf, IEEE80211_CONF_CHANGE_PS); } -static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) +static bool rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; struct queue_entry *entry; u32 status; u8 qid; + int max_tx_done = 16; while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) { qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE); @@ -759,7 +760,12 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev) entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); rt2800_txdone_entry(entry, status); + + if (--max_tx_done == 0) + break; } + + return !max_tx_done; } static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, @@ -780,7 +786,9 @@ static void rt2800pci_enable_interrupt(struct rt2x00_dev *rt2x00dev, static void rt2800pci_txstatus_tasklet(unsigned long data) { - rt2800pci_txdone((struct rt2x00_dev *)data); + struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; + if (rt2800pci_txdone(rt2x00dev)) + tasklet_schedule(&rt2x00dev->txstatus_tasklet); /* * No need to enable the tx status interrupt here as we always @@ -806,8 +814,10 @@ static void rt2800pci_tbtt_tasklet(unsigned long data) static void rt2800pci_rxdone_tasklet(unsigned long data) { struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00pci_rxdone(rt2x00dev); - rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE); + if (rt2x00pci_rxdone(rt2x00dev)) + tasklet_schedule(&rt2x00dev->rxdone_tasklet); + else + rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE); } static void rt2800pci_autowake_tasklet(unsigned long data) @@ -1043,6 +1053,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, + .gain_calibration = rt2800_gain_calibration, .start_queue = rt2800pci_start_queue, .kick_queue = rt2800pci_kick_queue, .stop_queue = rt2800pci_stop_queue, diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 37509d019910..6ba31a0e8f78 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -564,7 +564,6 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (!modparam_nohwcrypt) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); - __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_HT_TX_DESC, &rt2x00dev->flags); /* @@ -630,6 +629,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, + .gain_calibration = rt2800_gain_calibration, .watchdog = rt2800usb_watchdog, .start_queue = rt2800usb_start_queue, .kick_queue = rt2x00usb_kick_queue, @@ -882,6 +882,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Zyxel */ { USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x0586, 0x3418), USB_DEVICE_DATA(&rt2800usb_ops) }, #ifdef CONFIG_RT2800USB_RT33XX /* Ralink */ { USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) }, diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 7f10239f56a8..a2bd5feb9d5c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -348,6 +348,11 @@ struct link { * to bring the device/driver back into the desired state. */ struct delayed_work watchdog_work; + + /* + * Work structure for scheduling periodic AGC adjustments. + */ + struct delayed_work agc_work; }; enum rt2x00_delayed_flags { @@ -556,6 +561,7 @@ struct rt2x00lib_ops { struct link_qual *qual); void (*link_tuner) (struct rt2x00_dev *rt2x00dev, struct link_qual *qual, const u32 count); + void (*gain_calibration) (struct rt2x00_dev *rt2x00dev); /* * Data queue handlers. @@ -674,7 +680,6 @@ enum rt2x00_flags { DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, DRIVER_SUPPORT_PRE_TBTT_INTERRUPT, DRIVER_SUPPORT_LINK_TUNING, - DRIVER_SUPPORT_WATCHDOG, /* * Driver configuration diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index c92db3264741..66166ef037f5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -568,7 +568,6 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name, blob->data = data; data += sprintf(data, "driver:\t%s\n", intf->rt2x00dev->ops->name); data += sprintf(data, "version:\t%s\n", DRV_VERSION); - data += sprintf(data, "compiled:\t%s %s\n", __DATE__, __TIME__); blob->size = strlen(blob->data); return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 84eb6ad36377..9bffe8438d1f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -27,6 +27,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/log2.h> #include "rt2x00.h" #include "rt2x00lib.h" @@ -70,6 +71,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) */ rt2x00queue_start_queues(rt2x00dev); rt2x00link_start_tuner(rt2x00dev); + rt2x00link_start_agc(rt2x00dev); /* * Start watchdog monitoring. @@ -92,6 +94,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) /* * Stop all queues */ + rt2x00link_stop_agc(rt2x00dev); rt2x00link_stop_tuner(rt2x00dev); rt2x00queue_stop_queues(rt2x00dev); rt2x00queue_flush_queues(rt2x00dev, true); @@ -350,10 +353,14 @@ void rt2x00lib_txdone(struct queue_entry *entry, * which would allow the rc algorithm to better decide on * which rates are suitable. */ - if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) { + if (test_bit(TXDONE_AMPDU, &txdesc->flags) || + tx_info->flags & IEEE80211_TX_CTL_AMPDU) { tx_info->flags |= IEEE80211_TX_STAT_AMPDU; tx_info->status.ampdu_len = 1; tx_info->status.ampdu_ack_len = success ? 1 : 0; + + if (!success) + tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; } if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { @@ -511,8 +518,6 @@ void rt2x00lib_rxdone(struct queue_entry *entry) (rxdesc.size > header_length) && (rxdesc.dev_flags & RXDONE_L2PAD)) rt2x00queue_remove_l2pad(entry->skb, header_length); - else - rt2x00queue_align_payload(entry->skb, header_length); /* Trim buffer to correct size */ skb_trim(entry->skb, rxdesc.size); @@ -811,13 +816,18 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) */ if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags)) { /* - * Allocate txstatus fifo and tasklet, we use a size of 512 - * for the kfifo which is big enough to store 512/4=128 tx - * status reports. In the worst case (tx status for all tx - * queues gets reported before we've got a chance to handle - * them) 24*4=384 tx status reports need to be cached. + * Allocate the txstatus fifo. In the worst case the tx + * status fifo has to hold the tx status of all entries + * in all tx queues. Hence, calculate the kfifo size as + * tx_queues * entry_num and round up to the nearest + * power of 2. */ - status = kfifo_alloc(&rt2x00dev->txstatus_fifo, 512, + int kfifo_size = + roundup_pow_of_two(rt2x00dev->ops->tx_queues * + rt2x00dev->ops->tx->entry_num * + sizeof(u32)); + + status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size, GFP_KERNEL); if (status) return status; diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c index ae1219dffaae..e8c0c3e92c2f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00ht.c +++ b/drivers/net/wireless/rt2x00/rt2x00ht.c @@ -43,8 +43,11 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry, txdesc->u.ht.ba_size = 7; /* FIXME: What value is needed? */ - txdesc->u.ht.stbc = - (tx_info->flags & IEEE80211_TX_CTL_STBC) >> IEEE80211_TX_CTL_STBC_SHIFT; + /* + * Only one STBC stream is supported for now. + */ + if (tx_info->flags & IEEE80211_TX_CTL_STBC) + txdesc->u.ht.stbc = 1; /* * If IEEE80211_TX_RC_MCS is set txrate->idx just contains the diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 2d94cbaf5f4a..88f2f9275528 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -32,6 +32,7 @@ */ #define WATCHDOG_INTERVAL round_jiffies_relative(HZ) #define LINK_TUNE_INTERVAL round_jiffies_relative(HZ) +#define AGC_INTERVAL round_jiffies_relative(4 * HZ) /* * rt2x00_rate: Per rate device information @@ -119,16 +120,6 @@ void rt2x00queue_free_skb(struct queue_entry *entry); void rt2x00queue_align_frame(struct sk_buff *skb); /** - * rt2x00queue_align_payload - Align 802.11 payload to 4-byte boundary - * @skb: The skb to align - * @header_length: Length of 802.11 header - * - * Align the 802.11 payload to a 4-byte boundary, this could - * mean the header is not aligned properly though. - */ -void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length); - -/** * rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary * @skb: The skb to align * @header_length: Length of 802.11 header @@ -281,6 +272,18 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev); void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev); /** + * rt2x00link_start_agc - Start periodic gain calibration + * @rt2x00dev: Pointer to &struct rt2x00_dev. + */ +void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev); + +/** + * rt2x00link_stop_agc - Stop periodic gain calibration + * @rt2x00dev: Pointer to &struct rt2x00_dev. + */ +void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev); + +/** * rt2x00link_register - Initialize link tuning & watchdog functionality * @rt2x00dev: Pointer to &struct rt2x00_dev. * diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index 29abfdeb0b65..1435976b8779 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -413,12 +413,11 @@ void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev) { struct link *link = &rt2x00dev->link; - if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || - !test_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags)) - return; - - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->watchdog_work, WATCHDOG_INTERVAL); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + rt2x00dev->ops->lib->watchdog) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->watchdog_work, + WATCHDOG_INTERVAL); } void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev) @@ -447,8 +446,46 @@ static void rt2x00link_watchdog(struct work_struct *work) WATCHDOG_INTERVAL); } +void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev) +{ + struct link *link = &rt2x00dev->link; + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + rt2x00dev->ops->lib->gain_calibration) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->agc_work, + AGC_INTERVAL); +} + +void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev) +{ + cancel_delayed_work_sync(&rt2x00dev->link.agc_work); +} + +static void rt2x00link_agc(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, link.agc_work.work); + struct link *link = &rt2x00dev->link; + + /* + * When the radio is shutting down we should + * immediately cease the watchdog monitoring. + */ + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + rt2x00dev->ops->lib->gain_calibration(rt2x00dev); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->agc_work, + AGC_INTERVAL); +} + void rt2x00link_register(struct rt2x00_dev *rt2x00dev) { + INIT_DELAYED_WORK(&rt2x00dev->link.agc_work, rt2x00link_agc); INIT_DELAYED_WORK(&rt2x00dev->link.watchdog_work, rt2x00link_watchdog); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00link_tuner); } diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 4dd82b0b0520..9649bd0cd718 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -60,14 +60,15 @@ int rt2x00pci_regbusy_read(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00pci_regbusy_read); -void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) +bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue = rt2x00dev->rx; struct queue_entry *entry; struct queue_entry_priv_pci *entry_priv; struct skb_frame_desc *skbdesc; + int max_rx = 16; - while (1) { + while (--max_rx) { entry = rt2x00queue_get_entry(queue, Q_INDEX); entry_priv = entry->priv_data; @@ -93,6 +94,8 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) */ rt2x00lib_rxdone(entry); } + + return !max_rx; } EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index 746ce8fe8cf4..07961b8b369a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -101,8 +101,11 @@ struct queue_entry_priv_pci { /** * rt2x00pci_rxdone - Handle RX done events * @rt2x00dev: Device pointer, see &struct rt2x00_dev. + * + * Returns true if there are still rx frames pending and false if all + * pending rx frames were processed. */ -void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); +bool rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); /* * Device initialization handlers. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 4358051bfe1a..94b8bbb7ad80 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -148,19 +148,6 @@ void rt2x00queue_align_frame(struct sk_buff *skb) skb_trim(skb, frame_length); } -void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length) -{ - unsigned int frame_length = skb->len; - unsigned int align = ALIGN_SIZE(skb, header_length); - - if (!align) - return; - - skb_push(skb, align); - memmove(skb->data, skb->data + align, frame_length); - skb_trim(skb, frame_length); -} - void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length) { unsigned int payload_length = skb->len - header_length; @@ -495,8 +482,11 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, struct skb_frame_desc *skbdesc; u8 rate_idx, rate_flags; - if (unlikely(rt2x00queue_full(queue))) + if (unlikely(rt2x00queue_full(queue))) { + ERROR(queue->rt2x00dev, + "Dropping frame due to full tx queue %d.\n", queue->qid); return -ENOBUFS; + } if (unlikely(test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))) { diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 217861f8d95f..5db6a99fce7d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -217,6 +217,7 @@ enum txdone_entry_desc_flags { TXDONE_FALLBACK, TXDONE_FAILURE, TXDONE_EXCESSIVE_RETRY, + TXDONE_AMPDU, }; /** diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 77e8113b91e1..8ee1514a7943 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2313,8 +2313,10 @@ static void rt61pci_tbtt_tasklet(unsigned long data) static void rt61pci_rxdone_tasklet(unsigned long data) { struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data; - rt2x00pci_rxdone(rt2x00dev); - rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE); + if (rt2x00pci_rxdone(rt2x00dev)) + rt2x00pci_rxdone(rt2x00dev); + else + rt61pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RXDONE); } static void rt61pci_autowake_tasklet(unsigned long data) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 02f1148c577e..6593059f9c7e 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2209,7 +2209,6 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) if (!modparam_nohwcrypt) __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); __set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags); - __set_bit(DRIVER_SUPPORT_WATCHDOG, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2407,7 +2406,6 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) }, /* Belkin */ - { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) }, |
