diff options
Diffstat (limited to 'drivers/net/wireless/mwifiex')
35 files changed, 24938 insertions, 0 deletions
diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c new file mode 100644 index 000000000000..73a6e62f5680 --- /dev/null +++ b/drivers/net/wireless/mwifiex/11n.c @@ -0,0 +1,809 @@ +/* + * Marvell Wireless LAN device driver: 802.11n + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +/* + * Fills HT capability information field, AMPDU Parameters field, HT extended + * capability field, and supported MCS set fields. + * + * Only the following HT capability information fields are used, all other + * fields are always turned off. + * + * Bit 1 : Supported channel width (0: 20MHz, 1: Both 20 and 40 MHz) + * Bit 4 : Greenfield support (0: Not supported, 1: Supported) + * Bit 5 : Short GI for 20 MHz support (0: Not supported, 1: Supported) + * Bit 6 : Short GI for 40 MHz support (0: Not supported, 1: Supported) + * Bit 7 : Tx STBC (0: Not supported, 1: Supported) + * Bit 8-9 : Rx STBC (0: Not supported, X: Support for up to X spatial streams) + * Bit 10 : Delayed BA support (0: Not supported, 1: Supported) + * Bit 11 : Maximum AMSDU length (0: 3839 octets, 1: 7935 octets) + * Bit 14 : 40-Mhz intolerant support (0: Not supported, 1: Supported) + * + * In addition, the following AMPDU Parameters are set - + * - Maximum AMPDU length exponent (set to 3) + * - Minimum AMPDU start spacing (set to 0 - No restrictions) + * + * MCS is set for 1x1, with MSC32 for infra mode or ad-hoc mode with 40 MHz + * support. + * + * RD responder bit to set to clear in the extended capability header. + */ +void +mwifiex_fill_cap_info(struct mwifiex_private *priv, + struct mwifiex_ie_types_htcap *ht_cap) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u8 *mcs; + int rx_mcs_supp; + uint16_t ht_cap_info = le16_to_cpu(ht_cap->ht_cap.cap_info); + uint16_t ht_ext_cap = le16_to_cpu(ht_cap->ht_cap.extended_ht_cap_info); + + /* Convert dev_cap to IEEE80211_HT_CAP */ + if (ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) + ht_cap_info |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + else + ht_cap_info &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + if (ISSUPP_SHORTGI20(adapter->hw_dot_11n_dev_cap)) + ht_cap_info |= IEEE80211_HT_CAP_SGI_20; + else + ht_cap_info &= ~IEEE80211_HT_CAP_SGI_20; + + if (ISSUPP_SHORTGI40(adapter->hw_dot_11n_dev_cap)) + ht_cap_info |= IEEE80211_HT_CAP_SGI_40; + else + ht_cap_info &= ~IEEE80211_HT_CAP_SGI_40; + + if (ISSUPP_TXSTBC(adapter->hw_dot_11n_dev_cap)) + ht_cap_info |= IEEE80211_HT_CAP_TX_STBC; + else + ht_cap_info &= ~IEEE80211_HT_CAP_TX_STBC; + + if (ISSUPP_RXSTBC(adapter->hw_dot_11n_dev_cap)) + ht_cap_info |= 1 << IEEE80211_HT_CAP_RX_STBC_SHIFT; + else + ht_cap_info &= ~(3 << IEEE80211_HT_CAP_RX_STBC_SHIFT); + + if (ISSUPP_GREENFIELD(adapter->hw_dot_11n_dev_cap)) + ht_cap_info |= IEEE80211_HT_CAP_GRN_FLD; + else + ht_cap_info &= ~IEEE80211_HT_CAP_GRN_FLD; + + ht_cap_info &= ~IEEE80211_HT_CAP_MAX_AMSDU; + ht_cap_info |= IEEE80211_HT_CAP_SM_PS; + + ht_cap->ht_cap.ampdu_params_info |= IEEE80211_HT_AMPDU_PARM_FACTOR; + ht_cap->ht_cap.ampdu_params_info &= ~IEEE80211_HT_AMPDU_PARM_DENSITY; + + rx_mcs_supp = GET_RXMCSSUPP(adapter->hw_dev_mcs_support); + + mcs = (u8 *)&ht_cap->ht_cap.mcs; + + /* Set MCS for 1x1 */ + memset(mcs, 0xff, rx_mcs_supp); + + /* Clear all the other values */ + memset(&mcs[rx_mcs_supp], 0, + sizeof(struct ieee80211_mcs_info) - rx_mcs_supp); + + if (priv->bss_mode == NL80211_IFTYPE_STATION || + (ht_cap_info & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */ + SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask); + + /* Clear RD responder bit */ + RESETHT_EXTCAP_RDG(ht_ext_cap); + + ht_cap->ht_cap.cap_info = cpu_to_le16(ht_cap_info); + ht_cap->ht_cap.extended_ht_cap_info = cpu_to_le16(ht_ext_cap); +} + +/* + * This function returns the pointer to an entry in BA Stream + * table which matches the requested BA status. + */ +static struct mwifiex_tx_ba_stream_tbl * +mwifiex_11n_get_tx_ba_stream_status(struct mwifiex_private *priv, + enum mwifiex_ba_status ba_status) +{ + struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) { + if (tx_ba_tsr_tbl->ba_status == ba_status) { + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, + flags); + return tx_ba_tsr_tbl; + } + } + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + return NULL; +} + +/* + * This function handles the command response of delete a block + * ack request. + * + * The function checks the response success status and takes action + * accordingly (send an add BA request in case of success, or recreate + * the deleted stream in case of failure, if the add BA was also + * initiated by us). + */ +int mwifiex_ret_11n_delba(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + int tid; + struct mwifiex_tx_ba_stream_tbl *tx_ba_tbl; + struct host_cmd_ds_11n_delba *del_ba = + (struct host_cmd_ds_11n_delba *) &resp->params.del_ba; + uint16_t del_ba_param_set = le16_to_cpu(del_ba->del_ba_param_set); + + tid = del_ba_param_set >> DELBA_TID_POS; + if (del_ba->del_result == BA_RESULT_SUCCESS) { + mwifiex_11n_delete_ba_stream_tbl(priv, tid, + del_ba->peer_mac_addr, TYPE_DELBA_SENT, + INITIATOR_BIT(del_ba_param_set)); + + tx_ba_tbl = mwifiex_11n_get_tx_ba_stream_status(priv, + BA_STREAM_SETUP_INPROGRESS); + if (tx_ba_tbl) + mwifiex_send_addba(priv, tx_ba_tbl->tid, + tx_ba_tbl->ra); + } else { /* + * In case of failure, recreate the deleted stream in case + * we initiated the ADDBA + */ + if (INITIATOR_BIT(del_ba_param_set)) { + mwifiex_11n_create_tx_ba_stream_tbl(priv, + del_ba->peer_mac_addr, tid, + BA_STREAM_SETUP_INPROGRESS); + + tx_ba_tbl = mwifiex_11n_get_tx_ba_stream_status(priv, + BA_STREAM_SETUP_INPROGRESS); + if (tx_ba_tbl) + mwifiex_11n_delete_ba_stream_tbl(priv, + tx_ba_tbl->tid, tx_ba_tbl->ra, + TYPE_DELBA_SENT, true); + } + } + + return 0; +} + +/* + * This function handles the command response of add a block + * ack request. + * + * Handling includes changing the header fields to CPU formats, checking + * the response success status and taking actions accordingly (delete the + * BA stream table in case of failure). + */ +int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + int tid; + struct host_cmd_ds_11n_addba_rsp *add_ba_rsp = + (struct host_cmd_ds_11n_addba_rsp *) &resp->params.add_ba_rsp; + struct mwifiex_tx_ba_stream_tbl *tx_ba_tbl; + + add_ba_rsp->ssn = cpu_to_le16((le16_to_cpu(add_ba_rsp->ssn)) + & SSN_MASK); + + tid = (le16_to_cpu(add_ba_rsp->block_ack_param_set) + & IEEE80211_ADDBA_PARAM_TID_MASK) + >> BLOCKACKPARAM_TID_POS; + if (le16_to_cpu(add_ba_rsp->status_code) == BA_RESULT_SUCCESS) { + tx_ba_tbl = mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, + add_ba_rsp->peer_mac_addr); + if (tx_ba_tbl) { + dev_dbg(priv->adapter->dev, "info: BA stream complete\n"); + tx_ba_tbl->ba_status = BA_STREAM_SETUP_COMPLETE; + } else { + dev_err(priv->adapter->dev, "BA stream not created\n"); + } + } else { + mwifiex_11n_delete_ba_stream_tbl(priv, tid, + add_ba_rsp->peer_mac_addr, + TYPE_DELBA_SENT, true); + if (add_ba_rsp->add_rsp_result != BA_RESULT_TIMEOUT) + priv->aggr_prio_tbl[tid].ampdu_ap = + BA_STREAM_NOT_ALLOWED; + } + + return 0; +} + +/* + * This function handles the command response of 11n configuration request. + * + * Handling includes changing the header fields into CPU format. + */ +int mwifiex_ret_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct mwifiex_ds_11n_tx_cfg *tx_cfg = NULL; + struct host_cmd_ds_11n_cfg *htcfg = &resp->params.htcfg; + + if (data_buf) { + tx_cfg = (struct mwifiex_ds_11n_tx_cfg *) data_buf; + tx_cfg->tx_htcap = le16_to_cpu(htcfg->ht_tx_cap); + tx_cfg->tx_htinfo = le16_to_cpu(htcfg->ht_tx_info); + } + return 0; +} + +/* + * This function prepares command of reconfigure Tx buffer. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting Tx buffer size (for SET only) + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_recfg_tx_buf(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, int cmd_action, + void *data_buf) +{ + struct host_cmd_ds_txbuf_cfg *tx_buf = &cmd->params.tx_buf; + u16 action = (u16) cmd_action; + u16 buf_size = *((u16 *) data_buf); + + cmd->command = cpu_to_le16(HostCmd_CMD_RECONFIGURE_TX_BUFF); + cmd->size = + cpu_to_le16(sizeof(struct host_cmd_ds_txbuf_cfg) + S_DS_GEN); + tx_buf->action = cpu_to_le16(action); + switch (action) { + case HostCmd_ACT_GEN_SET: + dev_dbg(priv->adapter->dev, "cmd: set tx_buf=%d\n", buf_size); + tx_buf->buff_size = cpu_to_le16(buf_size); + break; + case HostCmd_ACT_GEN_GET: + default: + tx_buf->buff_size = 0; + break; + } + return 0; +} + +/* + * This function prepares command of AMSDU aggregation control. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting AMSDU control parameters (for SET only) + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_amsdu_aggr_ctrl(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + int cmd_action, void *data_buf) +{ + struct host_cmd_ds_amsdu_aggr_ctrl *amsdu_ctrl = + &cmd->params.amsdu_aggr_ctrl; + u16 action = (u16) cmd_action; + struct mwifiex_ds_11n_amsdu_aggr_ctrl *aa_ctrl = + (struct mwifiex_ds_11n_amsdu_aggr_ctrl *) data_buf; + + cmd->command = cpu_to_le16(HostCmd_CMD_AMSDU_AGGR_CTRL); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_amsdu_aggr_ctrl) + + S_DS_GEN); + amsdu_ctrl->action = cpu_to_le16(action); + switch (action) { + case HostCmd_ACT_GEN_SET: + amsdu_ctrl->enable = cpu_to_le16(aa_ctrl->enable); + amsdu_ctrl->curr_buf_size = 0; + break; + case HostCmd_ACT_GEN_GET: + default: + amsdu_ctrl->curr_buf_size = 0; + break; + } + return 0; +} + +/* + * This function handles the command response of AMSDU aggregation + * control request. + * + * Handling includes changing the header fields into CPU format. + */ +int mwifiex_ret_amsdu_aggr_ctrl(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct mwifiex_ds_11n_amsdu_aggr_ctrl *amsdu_aggr_ctrl = NULL; + struct host_cmd_ds_amsdu_aggr_ctrl *amsdu_ctrl = + &resp->params.amsdu_aggr_ctrl; + + if (data_buf) { + amsdu_aggr_ctrl = + (struct mwifiex_ds_11n_amsdu_aggr_ctrl *) data_buf; + amsdu_aggr_ctrl->enable = le16_to_cpu(amsdu_ctrl->enable); + amsdu_aggr_ctrl->curr_buf_size = + le16_to_cpu(amsdu_ctrl->curr_buf_size); + } + return 0; +} + +/* + * This function prepares 11n configuration command. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting HT Tx capability and HT Tx information fields + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct host_cmd_ds_11n_cfg *htcfg = &cmd->params.htcfg; + struct mwifiex_ds_11n_tx_cfg *txcfg = + (struct mwifiex_ds_11n_tx_cfg *) data_buf; + + cmd->command = cpu_to_le16(HostCmd_CMD_11N_CFG); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_11n_cfg) + S_DS_GEN); + htcfg->action = cpu_to_le16(cmd_action); + htcfg->ht_tx_cap = cpu_to_le16(txcfg->tx_htcap); + htcfg->ht_tx_info = cpu_to_le16(txcfg->tx_htinfo); + return 0; +} + +/* + * This function appends an 11n TLV to a buffer. + * + * Buffer allocation is responsibility of the calling + * function. No size validation is made here. + * + * The function fills up the following sections, if applicable - + * - HT capability IE + * - HT information IE (with channel list) + * - 20/40 BSS Coexistence IE + * - HT Extended Capabilities IE + */ +int +mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + u8 **buffer) +{ + struct mwifiex_ie_types_htcap *ht_cap; + struct mwifiex_ie_types_htinfo *ht_info; + struct mwifiex_ie_types_chan_list_param_set *chan_list; + struct mwifiex_ie_types_2040bssco *bss_co_2040; + struct mwifiex_ie_types_extcap *ext_cap; + int ret_len = 0; + + if (!buffer || !*buffer) + return ret_len; + + if (bss_desc->bcn_ht_cap) { + ht_cap = (struct mwifiex_ie_types_htcap *) *buffer; + memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap)); + ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY); + ht_cap->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_cap)); + memcpy((u8 *) ht_cap + sizeof(struct mwifiex_ie_types_header), + (u8 *) bss_desc->bcn_ht_cap + + sizeof(struct ieee_types_header), + le16_to_cpu(ht_cap->header.len)); + + mwifiex_fill_cap_info(priv, ht_cap); + + *buffer += sizeof(struct mwifiex_ie_types_htcap); + ret_len += sizeof(struct mwifiex_ie_types_htcap); + } + + if (bss_desc->bcn_ht_info) { + if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + ht_info = (struct mwifiex_ie_types_htinfo *) *buffer; + memset(ht_info, 0, + sizeof(struct mwifiex_ie_types_htinfo)); + ht_info->header.type = + cpu_to_le16(WLAN_EID_HT_INFORMATION); + ht_info->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_info)); + + memcpy((u8 *) ht_info + + sizeof(struct mwifiex_ie_types_header), + (u8 *) bss_desc->bcn_ht_info + + sizeof(struct ieee_types_header), + le16_to_cpu(ht_info->header.len)); + + if (!ISSUPP_CHANWIDTH40 + (priv->adapter->hw_dot_11n_dev_cap)) + ht_info->ht_info.ht_param &= + ~(IEEE80211_HT_PARAM_CHAN_WIDTH_ANY | + IEEE80211_HT_PARAM_CHA_SEC_OFFSET); + + *buffer += sizeof(struct mwifiex_ie_types_htinfo); + ret_len += sizeof(struct mwifiex_ie_types_htinfo); + } + + chan_list = + (struct mwifiex_ie_types_chan_list_param_set *) *buffer; + memset(chan_list, 0, + sizeof(struct mwifiex_ie_types_chan_list_param_set)); + chan_list->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_list->header.len = cpu_to_le16( + sizeof(struct mwifiex_ie_types_chan_list_param_set) - + sizeof(struct mwifiex_ie_types_header)); + chan_list->chan_scan_param[0].chan_number = + bss_desc->bcn_ht_info->control_chan; + chan_list->chan_scan_param[0].radio_type = + mwifiex_band_to_radio_type((u8) bss_desc->bss_band); + + if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) + && (bss_desc->bcn_ht_info->ht_param & + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) + SET_SECONDARYCHAN(chan_list->chan_scan_param[0]. + radio_type, + (bss_desc->bcn_ht_info->ht_param & + IEEE80211_HT_PARAM_CHA_SEC_OFFSET)); + + *buffer += sizeof(struct mwifiex_ie_types_chan_list_param_set); + ret_len += sizeof(struct mwifiex_ie_types_chan_list_param_set); + } + + if (bss_desc->bcn_bss_co_2040) { + bss_co_2040 = (struct mwifiex_ie_types_2040bssco *) *buffer; + memset(bss_co_2040, 0, + sizeof(struct mwifiex_ie_types_2040bssco)); + bss_co_2040->header.type = cpu_to_le16(WLAN_EID_BSS_COEX_2040); + bss_co_2040->header.len = + cpu_to_le16(sizeof(bss_co_2040->bss_co_2040)); + + memcpy((u8 *) bss_co_2040 + + sizeof(struct mwifiex_ie_types_header), + (u8 *) bss_desc->bcn_bss_co_2040 + + sizeof(struct ieee_types_header), + le16_to_cpu(bss_co_2040->header.len)); + + *buffer += sizeof(struct mwifiex_ie_types_2040bssco); + ret_len += sizeof(struct mwifiex_ie_types_2040bssco); + } + + if (bss_desc->bcn_ext_cap) { + ext_cap = (struct mwifiex_ie_types_extcap *) *buffer; + memset(ext_cap, 0, sizeof(struct mwifiex_ie_types_extcap)); + ext_cap->header.type = cpu_to_le16(WLAN_EID_EXT_CAPABILITY); + ext_cap->header.len = cpu_to_le16(sizeof(ext_cap->ext_cap)); + + memcpy((u8 *) ext_cap + + sizeof(struct mwifiex_ie_types_header), + (u8 *) bss_desc->bcn_ext_cap + + sizeof(struct ieee_types_header), + le16_to_cpu(ext_cap->header.len)); + + *buffer += sizeof(struct mwifiex_ie_types_extcap); + ret_len += sizeof(struct mwifiex_ie_types_extcap); + } + + return ret_len; +} + +/* + * This function reconfigures the Tx buffer size in firmware. + * + * This function prepares a firmware command and issues it, if + * the current Tx buffer size is different from the one requested. + * Maximum configurable Tx buffer size is limited by the HT capability + * field value. + */ +void +mwifiex_cfg_tx_buf(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + u16 max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_2K; + u16 tx_buf = 0; + u16 curr_tx_buf_size = 0; + + if (bss_desc->bcn_ht_cap) { + if (le16_to_cpu(bss_desc->bcn_ht_cap->cap_info) & + IEEE80211_HT_CAP_MAX_AMSDU) + max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_8K; + else + max_amsdu = MWIFIEX_TX_DATA_BUF_SIZE_4K; + } + + tx_buf = min(priv->adapter->max_tx_buf_size, max_amsdu); + + dev_dbg(priv->adapter->dev, "info: max_amsdu=%d, max_tx_buf=%d\n", + max_amsdu, priv->adapter->max_tx_buf_size); + + if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_2K) + curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; + else if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_4K) + curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K; + else if (priv->adapter->curr_tx_buf_size <= MWIFIEX_TX_DATA_BUF_SIZE_8K) + curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_8K; + if (curr_tx_buf_size != tx_buf) + mwifiex_prepare_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF, + HostCmd_ACT_GEN_SET, 0, + NULL, &tx_buf); + + return; +} + +/* + * This function checks if the given pointer is valid entry of + * Tx BA Stream table. + */ +static int mwifiex_is_tx_ba_stream_ptr_valid(struct mwifiex_private *priv, + struct mwifiex_tx_ba_stream_tbl *tx_tbl_ptr) +{ + struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl; + + list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) { + if (tx_ba_tsr_tbl == tx_tbl_ptr) + return true; + } + + return false; +} + +/* + * This function deletes the given entry in Tx BA Stream table. + * + * The function also performs a validity check on the supplied + * pointer before trying to delete. + */ +void mwifiex_11n_delete_tx_ba_stream_tbl_entry(struct mwifiex_private *priv, + struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl) +{ + if (!tx_ba_tsr_tbl && + mwifiex_is_tx_ba_stream_ptr_valid(priv, tx_ba_tsr_tbl)) + return; + + dev_dbg(priv->adapter->dev, "info: tx_ba_tsr_tbl %p\n", tx_ba_tsr_tbl); + + list_del(&tx_ba_tsr_tbl->list); + + kfree(tx_ba_tsr_tbl); + + return; +} + +/* + * This function deletes all the entries in Tx BA Stream table. + */ +void mwifiex_11n_delete_all_tx_ba_stream_tbl(struct mwifiex_private *priv) +{ + int i; + struct mwifiex_tx_ba_stream_tbl *del_tbl_ptr, *tmp_node; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + list_for_each_entry_safe(del_tbl_ptr, tmp_node, + &priv->tx_ba_stream_tbl_ptr, list) + mwifiex_11n_delete_tx_ba_stream_tbl_entry(priv, del_tbl_ptr); + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + + INIT_LIST_HEAD(&priv->tx_ba_stream_tbl_ptr); + + for (i = 0; i < MAX_NUM_TID; ++i) + priv->aggr_prio_tbl[i].ampdu_ap = + priv->aggr_prio_tbl[i].ampdu_user; +} + +/* + * This function returns the pointer to an entry in BA Stream + * table which matches the given RA/TID pair. + */ +struct mwifiex_tx_ba_stream_tbl * +mwifiex_11n_get_tx_ba_stream_tbl(struct mwifiex_private *priv, + int tid, u8 *ra) +{ + struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) { + if ((!memcmp(tx_ba_tsr_tbl->ra, ra, ETH_ALEN)) + && (tx_ba_tsr_tbl->tid == tid)) { + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, + flags); + return tx_ba_tsr_tbl; + } + } + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + return NULL; +} + +/* + * This function creates an entry in Tx BA stream table for the + * given RA/TID pair. + */ +void mwifiex_11n_create_tx_ba_stream_tbl(struct mwifiex_private *priv, + u8 *ra, int tid, + enum mwifiex_ba_status ba_status) +{ + struct mwifiex_tx_ba_stream_tbl *new_node; + unsigned long flags; + + if (!mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, ra)) { + new_node = kzalloc(sizeof(struct mwifiex_tx_ba_stream_tbl), + GFP_ATOMIC); + if (!new_node) { + dev_err(priv->adapter->dev, + "%s: failed to alloc new_node\n", __func__); + return; + } + + INIT_LIST_HEAD(&new_node->list); + + new_node->tid = tid; + new_node->ba_status = ba_status; + memcpy(new_node->ra, ra, ETH_ALEN); + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + list_add_tail(&new_node->list, &priv->tx_ba_stream_tbl_ptr); + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + } + + return; +} + +/* + * This function sends an add BA request to the given TID/RA pair. + */ +int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac) +{ + struct host_cmd_ds_11n_addba_req add_ba_req; + static u8 dialog_tok; + int ret; + + dev_dbg(priv->adapter->dev, "cmd: %s: tid %d\n", __func__, tid); + + add_ba_req.block_ack_param_set = cpu_to_le16( + (u16) ((tid << BLOCKACKPARAM_TID_POS) | + (priv->add_ba_param. + tx_win_size << BLOCKACKPARAM_WINSIZE_POS) | + IMMEDIATE_BLOCK_ACK)); + add_ba_req.block_ack_tmo = cpu_to_le16((u16)priv->add_ba_param.timeout); + + ++dialog_tok; + + if (dialog_tok == 0) + dialog_tok = 1; + + add_ba_req.dialog_token = dialog_tok; + memcpy(&add_ba_req.peer_mac_addr, peer_mac, ETH_ALEN); + + /* We don't wait for the response of this command */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_11N_ADDBA_REQ, + 0, 0, NULL, &add_ba_req); + + return ret; +} + +/* + * This function sends a delete BA request to the given TID/RA pair. + */ +int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac, + int initiator) +{ + struct host_cmd_ds_11n_delba delba; + int ret; + uint16_t del_ba_param_set; + + memset(&delba, 0, sizeof(delba)); + delba.del_ba_param_set = cpu_to_le16(tid << DELBA_TID_POS); + + del_ba_param_set = le16_to_cpu(delba.del_ba_param_set); + if (initiator) + del_ba_param_set |= IEEE80211_DELBA_PARAM_INITIATOR_MASK; + else + del_ba_param_set &= ~IEEE80211_DELBA_PARAM_INITIATOR_MASK; + + memcpy(&delba.peer_mac_addr, peer_mac, ETH_ALEN); + + /* We don't wait for the response of this command */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_11N_DELBA, + HostCmd_ACT_GEN_SET, 0, NULL, &delba); + + return ret; +} + +/* + * This function handles the command response of a delete BA request. + */ +void mwifiex_11n_delete_ba_stream(struct mwifiex_private *priv, u8 *del_ba) +{ + struct host_cmd_ds_11n_delba *cmd_del_ba = + (struct host_cmd_ds_11n_delba *) del_ba; + uint16_t del_ba_param_set = le16_to_cpu(cmd_del_ba->del_ba_param_set); + int tid; + + tid = del_ba_param_set >> DELBA_TID_POS; + + mwifiex_11n_delete_ba_stream_tbl(priv, tid, cmd_del_ba->peer_mac_addr, + TYPE_DELBA_RECEIVE, + INITIATOR_BIT(del_ba_param_set)); +} + +/* + * This function retrieves the Rx reordering table. + */ +int mwifiex_get_rx_reorder_tbl(struct mwifiex_private *priv, + struct mwifiex_ds_rx_reorder_tbl *buf) +{ + int i; + struct mwifiex_ds_rx_reorder_tbl *rx_reo_tbl = buf; + struct mwifiex_rx_reorder_tbl *rx_reorder_tbl_ptr; + int count = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags); + list_for_each_entry(rx_reorder_tbl_ptr, &priv->rx_reorder_tbl_ptr, + list) { + rx_reo_tbl->tid = (u16) rx_reorder_tbl_ptr->tid; + memcpy(rx_reo_tbl->ta, rx_reorder_tbl_ptr->ta, ETH_ALEN); + rx_reo_tbl->start_win = rx_reorder_tbl_ptr->start_win; + rx_reo_tbl->win_size = rx_reorder_tbl_ptr->win_size; + for (i = 0; i < rx_reorder_tbl_ptr->win_size; ++i) { + if (rx_reorder_tbl_ptr->rx_reorder_ptr[i]) + rx_reo_tbl->buffer[i] = true; + else + rx_reo_tbl->buffer[i] = false; + } + rx_reo_tbl++; + count++; + + if (count >= MWIFIEX_MAX_RX_BASTREAM_SUPPORTED) + break; + } + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); + + return count; +} + +/* + * This function retrieves the Tx BA stream table. + */ +int mwifiex_get_tx_ba_stream_tbl(struct mwifiex_private *priv, + struct mwifiex_ds_tx_ba_stream_tbl *buf) +{ + struct mwifiex_tx_ba_stream_tbl *tx_ba_tsr_tbl; + struct mwifiex_ds_tx_ba_stream_tbl *rx_reo_tbl = buf; + int count = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + list_for_each_entry(tx_ba_tsr_tbl, &priv->tx_ba_stream_tbl_ptr, list) { + rx_reo_tbl->tid = (u16) tx_ba_tsr_tbl->tid; + dev_dbg(priv->adapter->dev, "data: %s tid=%d\n", + __func__, rx_reo_tbl->tid); + memcpy(rx_reo_tbl->ra, tx_ba_tsr_tbl->ra, ETH_ALEN); + rx_reo_tbl++; + count++; + if (count >= MWIFIEX_MAX_TX_BASTREAM_SUPPORTED) + break; + } + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + + return count; +} diff --git a/drivers/net/wireless/mwifiex/11n.h b/drivers/net/wireless/mwifiex/11n.h new file mode 100644 index 000000000000..71a853e61b61 --- /dev/null +++ b/drivers/net/wireless/mwifiex/11n.h @@ -0,0 +1,176 @@ +/* + * Marvell Wireless LAN device driver: 802.11n + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_11N_H_ +#define _MWIFIEX_11N_H_ + +#include "11n_aggr.h" +#include "11n_rxreorder.h" +#include "wmm.h" + +int mwifiex_ret_11n_delba(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp); +int mwifiex_ret_11n_addba_req(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp); +int mwifiex_ret_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf); +int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf); + +int mwifiex_cmd_11n_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf); + +int mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + u8 **buffer); +void mwifiex_cfg_tx_buf(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc); +void mwifiex_fill_cap_info(struct mwifiex_private *, + struct mwifiex_ie_types_htcap *); +int mwifiex_set_get_11n_htcap_cfg(struct mwifiex_private *priv, + u16 action, int *htcap_cfg); +void mwifiex_11n_delete_tx_ba_stream_tbl_entry(struct mwifiex_private *priv, + struct mwifiex_tx_ba_stream_tbl + *tx_tbl); +void mwifiex_11n_delete_all_tx_ba_stream_tbl(struct mwifiex_private *priv); +struct mwifiex_tx_ba_stream_tbl *mwifiex_11n_get_tx_ba_stream_tbl(struct + mwifiex_private + *priv, int tid, + u8 *ra); +void mwifiex_11n_create_tx_ba_stream_tbl(struct mwifiex_private *priv, u8 *ra, + int tid, + enum mwifiex_ba_status ba_status); +int mwifiex_send_addba(struct mwifiex_private *priv, int tid, u8 *peer_mac); +int mwifiex_send_delba(struct mwifiex_private *priv, int tid, u8 *peer_mac, + int initiator); +void mwifiex_11n_delete_ba_stream(struct mwifiex_private *priv, u8 *del_ba); +int mwifiex_get_rx_reorder_tbl(struct mwifiex_private *priv, + struct mwifiex_ds_rx_reorder_tbl *buf); +int mwifiex_get_tx_ba_stream_tbl(struct mwifiex_private *priv, + struct mwifiex_ds_tx_ba_stream_tbl *buf); +int mwifiex_ret_amsdu_aggr_ctrl(struct mwifiex_private *priv, + struct host_cmd_ds_command + *resp, + void *data_buf); +int mwifiex_cmd_recfg_tx_buf(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + int cmd_action, void *data_buf); +int mwifiex_cmd_amsdu_aggr_ctrl(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + int cmd_action, + void *data_buf); + +/* + * This function checks whether AMPDU is allowed or not for a particular TID. + */ +static inline u8 +mwifiex_is_ampdu_allowed(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int tid) +{ + return ((priv->aggr_prio_tbl[tid].ampdu_ap != BA_STREAM_NOT_ALLOWED) + ? true : false); +} + +/* + * This function checks whether AMSDU is allowed or not for a particular TID. + */ +static inline u8 +mwifiex_is_amsdu_allowed(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int tid) +{ + return (((priv->aggr_prio_tbl[tid].amsdu != BA_STREAM_NOT_ALLOWED) + && ((priv->is_data_rate_auto) + || !((priv->bitmap_rates[2]) & 0x03))) + ? true : false); +} + +/* + * This function checks whether a BA stream is available or not. + */ +static inline u8 +mwifiex_is_ba_stream_avail(struct mwifiex_private *priv) +{ + struct mwifiex_private *pmpriv = NULL; + u8 i = 0; + u32 ba_stream_num = 0; + + for (i = 0; i < priv->adapter->priv_num; i++) { + pmpriv = priv->adapter->priv[i]; + if (pmpriv) + ba_stream_num += + mwifiex_wmm_list_len(priv->adapter, + (struct list_head + *) &pmpriv-> + tx_ba_stream_tbl_ptr); + } + + return ((ba_stream_num < + MWIFIEX_MAX_TX_BASTREAM_SUPPORTED) ? true : false); +} + +/* + * This function finds the correct Tx BA stream to delete. + * + * Upon successfully locating, both the TID and the RA are returned. + */ +static inline u8 +mwifiex_find_stream_to_delete(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int ptr_tid, + int *ptid, u8 *ra) +{ + int tid; + u8 ret = false; + struct mwifiex_tx_ba_stream_tbl *tx_tbl; + unsigned long flags; + + tid = priv->aggr_prio_tbl[ptr_tid].ampdu_user; + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + list_for_each_entry(tx_tbl, &priv->tx_ba_stream_tbl_ptr, list) { + if (tid > priv->aggr_prio_tbl[tx_tbl->tid].ampdu_user) { + tid = priv->aggr_prio_tbl[tx_tbl->tid].ampdu_user; + *ptid = tx_tbl->tid; + memcpy(ra, tx_tbl->ra, ETH_ALEN); + ret = true; + } + } + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + + return ret; +} + +/* + * This function checks whether BA stream is set up or not. + */ +static inline int +mwifiex_is_ba_stream_setup(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int tid) +{ + struct mwifiex_tx_ba_stream_tbl *tx_tbl; + + tx_tbl = mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, ptr->ra); + if (tx_tbl && IS_BASTREAM_SETUP(tx_tbl)) + return true; + + return false; +} +#endif /* !_MWIFIEX_11N_H_ */ diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c new file mode 100644 index 000000000000..c2abced66957 --- /dev/null +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -0,0 +1,423 @@ +/* + * Marvell Wireless LAN device driver: 802.11n Aggregation + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" +#include "11n_aggr.h" + +/* + * Creates an AMSDU subframe for aggregation into one AMSDU packet. + * + * The resultant AMSDU subframe format is - + * + * +---- ~ -----+---- ~ ------+---- ~ -----+----- ~ -----+---- ~ -----+ + * | DA | SA | Length | SNAP header | MSDU | + * | data[0..5] | data[6..11] | | | data[14..] | + * +---- ~ -----+---- ~ ------+---- ~ -----+----- ~ -----+---- ~ -----+ + * <--6-bytes--> <--6-bytes--> <--2-bytes--><--8-bytes--> <--n-bytes--> + * + * This function also computes the amount of padding required to make the + * buffer length multiple of 4 bytes. + * + * Data => |DA|SA|SNAP-TYPE|........ .| + * MSDU => |DA|SA|Length|SNAP|...... ..| + */ +static int +mwifiex_11n_form_amsdu_pkt(struct mwifiex_adapter *adapter, + struct sk_buff *skb_aggr, + struct sk_buff *skb_src, int *pad) + +{ + int dt_offset; + struct rfc_1042_hdr snap = { + 0xaa, /* LLC DSAP */ + 0xaa, /* LLC SSAP */ + 0x03, /* LLC CTRL */ + {0x00, 0x00, 0x00}, /* SNAP OUI */ + 0x0000 /* SNAP type */ + /* + * This field will be overwritten + * later with ethertype + */ + }; + struct tx_packet_hdr *tx_header = NULL; + + skb_put(skb_aggr, sizeof(*tx_header)); + + tx_header = (struct tx_packet_hdr *) skb_aggr->data; + + /* Copy DA and SA */ + dt_offset = 2 * ETH_ALEN; + memcpy(&tx_header->eth803_hdr, skb_src->data, dt_offset); + + /* Copy SNAP header */ + snap.snap_type = *(u16 *) ((u8 *)skb_src->data + dt_offset); + dt_offset += sizeof(u16); + + memcpy(&tx_header->rfc1042_hdr, &snap, sizeof(struct rfc_1042_hdr)); + + skb_pull(skb_src, dt_offset); + + /* Update Length field */ + tx_header->eth803_hdr.h_proto = htons(skb_src->len + LLC_SNAP_LEN); + + /* Add payload */ + skb_put(skb_aggr, skb_src->len); + memcpy(skb_aggr->data + sizeof(*tx_header), skb_src->data, + skb_src->len); + *pad = (((skb_src->len + LLC_SNAP_LEN) & 3)) ? (4 - (((skb_src->len + + LLC_SNAP_LEN)) & 3)) : 0; + skb_put(skb_aggr, *pad); + + return skb_aggr->len + *pad; +} + +/* + * Adds TxPD to AMSDU header. + * + * Each AMSDU packet will contain one TxPD at the beginning, + * followed by multiple AMSDU subframes. + */ +static void +mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv, + struct sk_buff *skb) +{ + struct txpd *local_tx_pd; + + skb_push(skb, sizeof(*local_tx_pd)); + + local_tx_pd = (struct txpd *) skb->data; + memset(local_tx_pd, 0, sizeof(struct txpd)); + + /* Original priority has been overwritten */ + local_tx_pd->priority = (u8) skb->priority; + local_tx_pd->pkt_delay_2ms = + mwifiex_wmm_compute_drv_pkt_delay(priv, skb); + local_tx_pd->bss_num = priv->bss_num; + local_tx_pd->bss_type = priv->bss_type; + /* Always zero as the data is followed by struct txpd */ + local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd)); + local_tx_pd->tx_pkt_type = cpu_to_le16(PKT_TYPE_AMSDU); + local_tx_pd->tx_pkt_length = cpu_to_le16(skb->len - + sizeof(*local_tx_pd)); + + if (local_tx_pd->tx_control == 0) + /* TxCtrl set by user or default */ + local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl); + + if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && + (priv->adapter->pps_uapsd_mode)) { + if (true == mwifiex_check_last_packet_indication(priv)) { + priv->adapter->tx_lock_flag = true; + local_tx_pd->flags = + MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET; + } + } +} + +/* + * Counts the number of subframes in an aggregate packet. + * + * This function parses an aggregate packet buffer, looking for + * subframes and counting the number of such subframe found. The + * function automatically skips the DA/SA fields at the beginning + * of each subframe and padding at the end. + */ +static int +mwifiex_11n_get_num_aggr_pkts(u8 *data, int total_pkt_len) +{ + int pkt_count = 0, pkt_len, pad; + + while (total_pkt_len > 0) { + /* Length will be in network format, change it to host */ + pkt_len = ntohs((*(__be16 *)(data + 2 * ETH_ALEN))); + pad = (((pkt_len + sizeof(struct ethhdr)) & 3)) ? + (4 - ((pkt_len + sizeof(struct ethhdr)) & 3)) : 0; + data += pkt_len + pad + sizeof(struct ethhdr); + total_pkt_len -= pkt_len + pad + sizeof(struct ethhdr); + ++pkt_count; + } + + return pkt_count; +} + +/* + * De-aggregate received packets. + * + * This function parses the received aggregate buffer, extracts each subframe, + * strips off the SNAP header from them and sends the data portion for further + * processing. + * + * Each subframe body is copied onto a separate buffer, which are freed by + * upper layer after processing. The function also performs sanity tests on + * the received buffer. + */ +int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv, + struct sk_buff *skb) +{ + u16 pkt_len; + int total_pkt_len; + u8 *data; + int pad; + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + struct rxpd *local_rx_pd = (struct rxpd *) skb->data; + struct sk_buff *skb_daggr; + struct mwifiex_rxinfo *rx_info_daggr = NULL; + int ret = -1; + struct rx_packet_hdr *rx_pkt_hdr; + struct mwifiex_adapter *adapter = priv->adapter; + u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; + + data = (u8 *) (local_rx_pd + local_rx_pd->rx_pkt_offset); + total_pkt_len = local_rx_pd->rx_pkt_length; + + /* Sanity test */ + if (total_pkt_len > MWIFIEX_RX_DATA_BUF_SIZE) { + dev_err(adapter->dev, "total pkt len greater than buffer" + " size %d\n", total_pkt_len); + return -1; + } + + rx_info->use_count = mwifiex_11n_get_num_aggr_pkts(data, total_pkt_len); + + while (total_pkt_len > 0) { + rx_pkt_hdr = (struct rx_packet_hdr *) data; + /* Length will be in network format, change it to host */ + pkt_len = ntohs((*(__be16 *) (data + 2 * ETH_ALEN))); + if (pkt_len > total_pkt_len) { + dev_err(adapter->dev, "pkt_len %d > total_pkt_len %d\n", + total_pkt_len, pkt_len); + break; + } + + pad = (((pkt_len + sizeof(struct ethhdr)) & 3)) ? + (4 - ((pkt_len + sizeof(struct ethhdr)) & 3)) : 0; + + total_pkt_len -= pkt_len + pad + sizeof(struct ethhdr); + + if (memcmp(&rx_pkt_hdr->rfc1042_hdr, + rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) { + memmove(data + LLC_SNAP_LEN, data, 2 * ETH_ALEN); + data += LLC_SNAP_LEN; + pkt_len += sizeof(struct ethhdr) - LLC_SNAP_LEN; + } else { + *(u16 *) (data + 2 * ETH_ALEN) = (u16) 0; + pkt_len += sizeof(struct ethhdr); + } + + skb_daggr = dev_alloc_skb(pkt_len); + if (!skb_daggr) { + dev_err(adapter->dev, "%s: failed to alloc skb_daggr\n", + __func__); + return -1; + } + rx_info_daggr = MWIFIEX_SKB_RXCB(skb_daggr); + + rx_info_daggr->bss_index = rx_info->bss_index; + skb_daggr->tstamp = skb->tstamp; + rx_info_daggr->parent = skb; + skb_daggr->priority = skb->priority; + skb_put(skb_daggr, pkt_len); + memcpy(skb_daggr->data, data, pkt_len); + + ret = mwifiex_recv_packet(adapter, skb_daggr); + + switch (ret) { + case -EINPROGRESS: + break; + case -1: + dev_err(adapter->dev, "deaggr: host_to_card failed\n"); + case 0: + mwifiex_recv_packet_complete(adapter, skb_daggr, ret); + break; + default: + break; + } + + data += pkt_len + pad; + } + + return ret; +} + +/* + * Create aggregated packet. + * + * This function creates an aggregated MSDU packet, by combining buffers + * from the RA list. Each individual buffer is encapsulated as an AMSDU + * subframe and all such subframes are concatenated together to form the + * AMSDU packet. + * + * A TxPD is also added to the front of the resultant AMSDU packets for + * transmission. The resultant packets format is - + * + * +---- ~ ----+------ ~ ------+------ ~ ------+-..-+------ ~ ------+ + * | TxPD |AMSDU sub-frame|AMSDU sub-frame| .. |AMSDU sub-frame| + * | | 1 | 2 | .. | n | + * +---- ~ ----+------ ~ ------+------ ~ ------+ .. +------ ~ ------+ + */ +int +mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *pra_list, int headroom, + int ptrindex, unsigned long ra_list_flags) + __releases(&priv->wmm.ra_list_spinlock) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct sk_buff *skb_aggr, *skb_src; + struct mwifiex_txinfo *tx_info_aggr, *tx_info_src; + int pad = 0; + int ret = 0; + struct mwifiex_tx_param tx_param; + struct txpd *ptx_pd = NULL; + + if (skb_queue_empty(&pra_list->skb_head)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + return 0; + } + skb_src = skb_peek(&pra_list->skb_head); + tx_info_src = MWIFIEX_SKB_TXCB(skb_src); + skb_aggr = dev_alloc_skb(adapter->tx_buf_size); + if (!skb_aggr) { + dev_err(adapter->dev, "%s: alloc skb_aggr\n", __func__); + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + return -1; + } + skb_reserve(skb_aggr, headroom + sizeof(struct txpd)); + tx_info_aggr = MWIFIEX_SKB_TXCB(skb_aggr); + + tx_info_aggr->bss_index = tx_info_src->bss_index; + skb_aggr->priority = skb_src->priority; + + while (skb_src && ((skb_headroom(skb_aggr) + skb_src->len + + LLC_SNAP_LEN) + <= adapter->tx_buf_size)) { + + if (!skb_queue_empty(&pra_list->skb_head)) + skb_src = skb_dequeue(&pra_list->skb_head); + else + skb_src = NULL; + + pra_list->total_pkts_size -= skb_src->len; + + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + mwifiex_11n_form_amsdu_pkt(adapter, skb_aggr, skb_src, &pad); + + mwifiex_write_data_complete(adapter, skb_src, 0); + + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + + if (!mwifiex_is_ralist_valid(priv, pra_list, ptrindex)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + return -1; + } + + if (!skb_queue_empty(&pra_list->skb_head)) + skb_src = skb_peek(&pra_list->skb_head); + else + skb_src = NULL; + } + + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, ra_list_flags); + + /* Last AMSDU packet does not need padding */ + skb_trim(skb_aggr, skb_aggr->len - pad); + + /* Form AMSDU */ + mwifiex_11n_form_amsdu_txpd(priv, skb_aggr); + if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) + ptx_pd = (struct txpd *)skb_aggr->data; + + skb_push(skb_aggr, headroom); + + tx_param.next_pkt_len = ((pra_list->total_pkts_size) ? + (((pra_list->total_pkts_size) > + adapter->tx_buf_size) ? adapter-> + tx_buf_size : pra_list->total_pkts_size + + LLC_SNAP_LEN + sizeof(struct txpd)) : 0); + ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA, + skb_aggr->data, + skb_aggr->len, &tx_param); + switch (ret) { + case -EBUSY: + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + if (!mwifiex_is_ralist_valid(priv, pra_list, ptrindex)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + mwifiex_write_data_complete(adapter, skb_aggr, -1); + return -1; + } + if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && + (adapter->pps_uapsd_mode) && + (adapter->tx_lock_flag)) { + priv->adapter->tx_lock_flag = false; + ptx_pd->flags = 0; + } + + skb_queue_tail(&pra_list->skb_head, skb_aggr); + + pra_list->total_pkts_size += skb_aggr->len; + + tx_info_aggr->flags |= MWIFIEX_BUF_FLAG_REQUEUED_PKT; + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); + break; + case -1: + adapter->data_sent = false; + dev_err(adapter->dev, "%s: host_to_card failed: %#x\n", + __func__, ret); + adapter->dbg.num_tx_host_to_card_failure++; + mwifiex_write_data_complete(adapter, skb_aggr, ret); + return 0; + case -EINPROGRESS: + adapter->data_sent = false; + break; + case 0: + mwifiex_write_data_complete(adapter, skb_aggr, ret); + break; + default: + break; + } + if (ret != -EBUSY) { + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + if (mwifiex_is_ralist_valid(priv, pra_list, ptrindex)) { + priv->wmm.packets_out[ptrindex]++; + priv->wmm.tid_tbl_ptr[ptrindex].ra_list_curr = pra_list; + } + /* Now bss_prio_cur pointer points to next node */ + adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur = + list_first_entry( + &adapter->bss_prio_tbl[priv->bss_priority] + .bss_prio_cur->list, + struct mwifiex_bss_prio_node, list); + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + } + + return 0; +} diff --git a/drivers/net/wireless/mwifiex/11n_aggr.h b/drivers/net/wireless/mwifiex/11n_aggr.h new file mode 100644 index 000000000000..9c6dca7ab02c --- /dev/null +++ b/drivers/net/wireless/mwifiex/11n_aggr.h @@ -0,0 +1,32 @@ +/* + * Marvell Wireless LAN device driver: 802.11n Aggregation + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_11N_AGGR_H_ +#define _MWIFIEX_11N_AGGR_H_ + +#define PKT_TYPE_AMSDU 0xE6 + +int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv, + struct sk_buff *skb); +int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int headroom, + int ptr_index, unsigned long flags) + __releases(&priv->wmm.ra_list_spinlock); + +#endif /* !_MWIFIEX_11N_AGGR_H_ */ diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c new file mode 100644 index 000000000000..8e94e620e6f4 --- /dev/null +++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c @@ -0,0 +1,637 @@ +/* + * Marvell Wireless LAN device driver: 802.11n RX Re-ordering + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" +#include "11n_rxreorder.h" + +/* + * This function processes a received packet and forwards + * it to the kernel/upper layer. + */ +static int mwifiex_11n_dispatch_pkt(struct mwifiex_private *priv, void *payload) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + + ret = mwifiex_process_rx_packet(adapter, (struct sk_buff *) payload); + return ret; +} + +/* + * This function dispatches all packets in the Rx reorder table. + * + * There could be holes in the buffer, which are skipped by the function. + * Since the buffer is linear, the function uses rotation to simulate + * circular buffer. + */ +static int +mwifiex_11n_dispatch_pkt_until_start_win(struct mwifiex_private *priv, + struct mwifiex_rx_reorder_tbl + *rx_reor_tbl_ptr, int start_win) +{ + int no_pkt_to_send, i, xchg; + void *rx_tmp_ptr = NULL; + unsigned long flags; + + no_pkt_to_send = (start_win > rx_reor_tbl_ptr->start_win) ? + min((start_win - rx_reor_tbl_ptr->start_win), + rx_reor_tbl_ptr->win_size) : rx_reor_tbl_ptr->win_size; + + for (i = 0; i < no_pkt_to_send; ++i) { + spin_lock_irqsave(&priv->rx_pkt_lock, flags); + rx_tmp_ptr = NULL; + if (rx_reor_tbl_ptr->rx_reorder_ptr[i]) { + rx_tmp_ptr = rx_reor_tbl_ptr->rx_reorder_ptr[i]; + rx_reor_tbl_ptr->rx_reorder_ptr[i] = NULL; + } + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + if (rx_tmp_ptr) + mwifiex_11n_dispatch_pkt(priv, rx_tmp_ptr); + } + + spin_lock_irqsave(&priv->rx_pkt_lock, flags); + /* + * We don't have a circular buffer, hence use rotation to simulate + * circular buffer + */ + xchg = rx_reor_tbl_ptr->win_size - no_pkt_to_send; + for (i = 0; i < xchg; ++i) { + rx_reor_tbl_ptr->rx_reorder_ptr[i] = + rx_reor_tbl_ptr->rx_reorder_ptr[no_pkt_to_send + i]; + rx_reor_tbl_ptr->rx_reorder_ptr[no_pkt_to_send + i] = NULL; + } + + rx_reor_tbl_ptr->start_win = start_win; + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + + return 0; +} + +/* + * This function dispatches all packets in the Rx reorder table until + * a hole is found. + * + * The start window is adjusted automatically when a hole is located. + * Since the buffer is linear, the function uses rotation to simulate + * circular buffer. + */ +static int +mwifiex_11n_scan_and_dispatch(struct mwifiex_private *priv, + struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr) +{ + int i, j, xchg; + void *rx_tmp_ptr = NULL; + unsigned long flags; + + for (i = 0; i < rx_reor_tbl_ptr->win_size; ++i) { + spin_lock_irqsave(&priv->rx_pkt_lock, flags); + if (!rx_reor_tbl_ptr->rx_reorder_ptr[i]) { + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + break; + } + rx_tmp_ptr = rx_reor_tbl_ptr->rx_reorder_ptr[i]; + rx_reor_tbl_ptr->rx_reorder_ptr[i] = NULL; + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + mwifiex_11n_dispatch_pkt(priv, rx_tmp_ptr); + } + + spin_lock_irqsave(&priv->rx_pkt_lock, flags); + /* + * We don't have a circular buffer, hence use rotation to simulate + * circular buffer + */ + if (i > 0) { + xchg = rx_reor_tbl_ptr->win_size - i; + for (j = 0; j < xchg; ++j) { + rx_reor_tbl_ptr->rx_reorder_ptr[j] = + rx_reor_tbl_ptr->rx_reorder_ptr[i + j]; + rx_reor_tbl_ptr->rx_reorder_ptr[i + j] = NULL; + } + } + rx_reor_tbl_ptr->start_win = (rx_reor_tbl_ptr->start_win + i) + &(MAX_TID_VALUE - 1); + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + return 0; +} + +/* + * This function deletes the Rx reorder table and frees the memory. + * + * The function stops the associated timer and dispatches all the + * pending packets in the Rx reorder table before deletion. + */ +static void +mwifiex_11n_delete_rx_reorder_tbl_entry(struct mwifiex_private *priv, + struct mwifiex_rx_reorder_tbl + *rx_reor_tbl_ptr) +{ + unsigned long flags; + + if (!rx_reor_tbl_ptr) + return; + + mwifiex_11n_dispatch_pkt_until_start_win(priv, rx_reor_tbl_ptr, + (rx_reor_tbl_ptr->start_win + + rx_reor_tbl_ptr->win_size) + &(MAX_TID_VALUE - 1)); + + del_timer(&rx_reor_tbl_ptr->timer_context.timer); + + spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags); + list_del(&rx_reor_tbl_ptr->list); + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); + + kfree(rx_reor_tbl_ptr->rx_reorder_ptr); + kfree(rx_reor_tbl_ptr); +} + +/* + * This function returns the pointer to an entry in Rx reordering + * table which matches the given TA/TID pair. + */ +static struct mwifiex_rx_reorder_tbl * +mwifiex_11n_get_rx_reorder_tbl(struct mwifiex_private *priv, int tid, u8 *ta) +{ + struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr; + unsigned long flags; + + spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags); + list_for_each_entry(rx_reor_tbl_ptr, &priv->rx_reorder_tbl_ptr, list) { + if ((!memcmp(rx_reor_tbl_ptr->ta, ta, ETH_ALEN)) + && (rx_reor_tbl_ptr->tid == tid)) { + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, + flags); + return rx_reor_tbl_ptr; + } + } + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); + + return NULL; +} + +/* + * This function finds the last sequence number used in the packets + * buffered in Rx reordering table. + */ +static int +mwifiex_11n_find_last_seq_num(struct mwifiex_rx_reorder_tbl *rx_reorder_tbl_ptr) +{ + int i; + + for (i = (rx_reorder_tbl_ptr->win_size - 1); i >= 0; --i) + if (rx_reorder_tbl_ptr->rx_reorder_ptr[i]) + return i; + + return -1; +} + +/* + * This function flushes all the packets in Rx reordering table. + * + * The function checks if any packets are currently buffered in the + * table or not. In case there are packets available, it dispatches + * them and then dumps the Rx reordering table. + */ +static void +mwifiex_flush_data(unsigned long context) +{ + struct reorder_tmr_cnxt *reorder_cnxt = + (struct reorder_tmr_cnxt *) context; + int start_win; + + start_win = mwifiex_11n_find_last_seq_num(reorder_cnxt->ptr); + if (start_win >= 0) { + dev_dbg(reorder_cnxt->priv->adapter->dev, + "info: flush data %d\n", start_win); + mwifiex_11n_dispatch_pkt_until_start_win(reorder_cnxt->priv, + reorder_cnxt->ptr, + ((reorder_cnxt->ptr->start_win + + start_win + 1) & (MAX_TID_VALUE - 1))); + } +} + +/* + * This function creates an entry in Rx reordering table for the + * given TA/TID. + * + * The function also initializes the entry with sequence number, window + * size as well as initializes the timer. + * + * If the received TA/TID pair is already present, all the packets are + * dispatched and the window size is moved until the SSN. + */ +static void +mwifiex_11n_create_rx_reorder_tbl(struct mwifiex_private *priv, u8 *ta, + int tid, int win_size, int seq_num) +{ + int i; + struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr, *new_node; + u16 last_seq = 0; + unsigned long flags; + + /* + * If we get a TID, ta pair which is already present dispatch all the + * the packets and move the window size until the ssn + */ + rx_reor_tbl_ptr = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta); + if (rx_reor_tbl_ptr) { + mwifiex_11n_dispatch_pkt_until_start_win(priv, rx_reor_tbl_ptr, + seq_num); + return; + } + /* if !rx_reor_tbl_ptr then create one */ + new_node = kzalloc(sizeof(struct mwifiex_rx_reorder_tbl), GFP_KERNEL); + if (!new_node) { + dev_err(priv->adapter->dev, "%s: failed to alloc new_node\n", + __func__); + return; + } + + INIT_LIST_HEAD(&new_node->list); + new_node->tid = tid; + memcpy(new_node->ta, ta, ETH_ALEN); + new_node->start_win = seq_num; + if (mwifiex_queuing_ra_based(priv)) + /* TODO for adhoc */ + dev_dbg(priv->adapter->dev, + "info: ADHOC:last_seq=%d start_win=%d\n", + last_seq, new_node->start_win); + else + last_seq = priv->rx_seq[tid]; + + if (last_seq >= new_node->start_win) + new_node->start_win = last_seq + 1; + + new_node->win_size = win_size; + + new_node->rx_reorder_ptr = kzalloc(sizeof(void *) * win_size, + GFP_KERNEL); + if (!new_node->rx_reorder_ptr) { + kfree((u8 *) new_node); + dev_err(priv->adapter->dev, + "%s: failed to alloc reorder_ptr\n", __func__); + return; + } + + new_node->timer_context.ptr = new_node; + new_node->timer_context.priv = priv; + + init_timer(&new_node->timer_context.timer); + new_node->timer_context.timer.function = mwifiex_flush_data; + new_node->timer_context.timer.data = + (unsigned long) &new_node->timer_context; + + for (i = 0; i < win_size; ++i) + new_node->rx_reorder_ptr[i] = NULL; + + spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags); + list_add_tail(&new_node->list, &priv->rx_reorder_tbl_ptr); + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); + + return; +} + +/* + * This function prepares command for adding a BA request. + * + * Preparation includes - + * - Setting command ID and proper size + * - Setting add BA request buffer + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_11n_addba_req(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + struct host_cmd_ds_11n_addba_req *add_ba_req = + (struct host_cmd_ds_11n_addba_req *) + &cmd->params.add_ba_req; + + cmd->command = cpu_to_le16(HostCmd_CMD_11N_ADDBA_REQ); + cmd->size = cpu_to_le16(sizeof(*add_ba_req) + S_DS_GEN); + memcpy(add_ba_req, data_buf, sizeof(*add_ba_req)); + + return 0; +} + +/* + * This function prepares command for adding a BA response. + * + * Preparation includes - + * - Setting command ID and proper size + * - Setting add BA response buffer + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf) +{ + struct host_cmd_ds_11n_addba_rsp *add_ba_rsp = + (struct host_cmd_ds_11n_addba_rsp *) + &cmd->params.add_ba_rsp; + struct host_cmd_ds_11n_addba_req *cmd_addba_req = + (struct host_cmd_ds_11n_addba_req *) data_buf; + u8 tid = 0; + int win_size = 0; + uint16_t block_ack_param_set; + + cmd->command = cpu_to_le16(HostCmd_CMD_11N_ADDBA_RSP); + cmd->size = cpu_to_le16(sizeof(*add_ba_rsp) + S_DS_GEN); + + memcpy(add_ba_rsp->peer_mac_addr, cmd_addba_req->peer_mac_addr, + ETH_ALEN); + add_ba_rsp->dialog_token = cmd_addba_req->dialog_token; + add_ba_rsp->block_ack_tmo = cmd_addba_req->block_ack_tmo; + add_ba_rsp->ssn = cmd_addba_req->ssn; + + block_ack_param_set = le16_to_cpu(cmd_addba_req->block_ack_param_set); + tid = (block_ack_param_set & IEEE80211_ADDBA_PARAM_TID_MASK) + >> BLOCKACKPARAM_TID_POS; + add_ba_rsp->status_code = cpu_to_le16(ADDBA_RSP_STATUS_ACCEPT); + block_ack_param_set &= ~IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK; + /* We donot support AMSDU inside AMPDU, hence reset the bit */ + block_ack_param_set &= ~BLOCKACKPARAM_AMSDU_SUPP_MASK; + block_ack_param_set |= (priv->add_ba_param.rx_win_size << + BLOCKACKPARAM_WINSIZE_POS); + add_ba_rsp->block_ack_param_set = cpu_to_le16(block_ack_param_set); + win_size = (le16_to_cpu(add_ba_rsp->block_ack_param_set) + & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) + >> BLOCKACKPARAM_WINSIZE_POS; + cmd_addba_req->block_ack_param_set = cpu_to_le16(block_ack_param_set); + + mwifiex_11n_create_rx_reorder_tbl(priv, cmd_addba_req->peer_mac_addr, + tid, win_size, le16_to_cpu(cmd_addba_req->ssn)); + return 0; +} + +/* + * This function prepares command for deleting a BA request. + * + * Preparation includes - + * - Setting command ID and proper size + * - Setting del BA request buffer + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_11n_delba(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + struct host_cmd_ds_11n_delba *del_ba = (struct host_cmd_ds_11n_delba *) + &cmd->params.del_ba; + + cmd->command = cpu_to_le16(HostCmd_CMD_11N_DELBA); + cmd->size = cpu_to_le16(sizeof(*del_ba) + S_DS_GEN); + memcpy(del_ba, data_buf, sizeof(*del_ba)); + + return 0; +} + +/* + * This function identifies if Rx reordering is needed for a received packet. + * + * In case reordering is required, the function will do the reordering + * before sending it to kernel. + * + * The Rx reorder table is checked first with the received TID/TA pair. If + * not found, the received packet is dispatched immediately. But if found, + * the packet is reordered and all the packets in the updated Rx reordering + * table is dispatched until a hole is found. + * + * For sequence number less than the starting window, the packet is dropped. + */ +int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *priv, + u16 seq_num, u16 tid, + u8 *ta, u8 pkt_type, void *payload) +{ + struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr; + int start_win, end_win, win_size; + int ret = 0; + u16 pkt_index = 0; + + rx_reor_tbl_ptr = + mwifiex_11n_get_rx_reorder_tbl((struct mwifiex_private *) priv, + tid, ta); + if (!rx_reor_tbl_ptr) { + if (pkt_type != PKT_TYPE_BAR) + mwifiex_11n_dispatch_pkt(priv, payload); + return 0; + } + start_win = rx_reor_tbl_ptr->start_win; + win_size = rx_reor_tbl_ptr->win_size; + end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1); + del_timer(&rx_reor_tbl_ptr->timer_context.timer); + mod_timer(&rx_reor_tbl_ptr->timer_context.timer, jiffies + + (MIN_FLUSH_TIMER_MS * win_size * HZ) / 1000); + + /* + * If seq_num is less then starting win then ignore and drop the + * packet + */ + if ((start_win + TWOPOW11) > (MAX_TID_VALUE - 1)) {/* Wrap */ + if (seq_num >= ((start_win + (TWOPOW11)) & (MAX_TID_VALUE - 1)) + && (seq_num < start_win)) + return -1; + } else if ((seq_num < start_win) + || (seq_num > (start_win + (TWOPOW11)))) { + return -1; + } + + /* + * If this packet is a BAR we adjust seq_num as + * WinStart = seq_num + */ + if (pkt_type == PKT_TYPE_BAR) + seq_num = ((seq_num + win_size) - 1) & (MAX_TID_VALUE - 1); + + if (((end_win < start_win) + && (seq_num < (TWOPOW11 - (MAX_TID_VALUE - start_win))) + && (seq_num > end_win)) || ((end_win > start_win) + && ((seq_num > end_win) || (seq_num < start_win)))) { + end_win = seq_num; + if (((seq_num - win_size) + 1) >= 0) + start_win = (end_win - win_size) + 1; + else + start_win = (MAX_TID_VALUE - (win_size - seq_num)) + 1; + ret = mwifiex_11n_dispatch_pkt_until_start_win(priv, + rx_reor_tbl_ptr, start_win); + + if (ret) + return ret; + } + + if (pkt_type != PKT_TYPE_BAR) { + if (seq_num >= start_win) + pkt_index = seq_num - start_win; + else + pkt_index = (seq_num+MAX_TID_VALUE) - start_win; + + if (rx_reor_tbl_ptr->rx_reorder_ptr[pkt_index]) + return -1; + + rx_reor_tbl_ptr->rx_reorder_ptr[pkt_index] = payload; + } + + /* + * Dispatch all packets sequentially from start_win until a + * hole is found and adjust the start_win appropriately + */ + ret = mwifiex_11n_scan_and_dispatch(priv, rx_reor_tbl_ptr); + + return ret; +} + +/* + * This function deletes an entry for a given TID/TA pair. + * + * The TID/TA are taken from del BA event body. + */ +void +mwifiex_11n_delete_ba_stream_tbl(struct mwifiex_private *priv, int tid, + u8 *peer_mac, u8 type, int initiator) +{ + struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr; + struct mwifiex_tx_ba_stream_tbl *ptx_tbl; + u8 cleanup_rx_reorder_tbl; + unsigned long flags; + + if (type == TYPE_DELBA_RECEIVE) + cleanup_rx_reorder_tbl = (initiator) ? true : false; + else + cleanup_rx_reorder_tbl = (initiator) ? false : true; + + dev_dbg(priv->adapter->dev, "event: DELBA: %pM tid=%d, " + "initiator=%d\n", peer_mac, tid, initiator); + + if (cleanup_rx_reorder_tbl) { + rx_reor_tbl_ptr = mwifiex_11n_get_rx_reorder_tbl(priv, tid, + peer_mac); + if (!rx_reor_tbl_ptr) { + dev_dbg(priv->adapter->dev, + "event: TID, TA not found in table\n"); + return; + } + mwifiex_11n_delete_rx_reorder_tbl_entry(priv, rx_reor_tbl_ptr); + } else { + ptx_tbl = mwifiex_11n_get_tx_ba_stream_tbl(priv, tid, peer_mac); + if (!ptx_tbl) { + dev_dbg(priv->adapter->dev, + "event: TID, RA not found in table\n"); + return; + } + + spin_lock_irqsave(&priv->tx_ba_stream_tbl_lock, flags); + mwifiex_11n_delete_tx_ba_stream_tbl_entry(priv, ptx_tbl); + spin_unlock_irqrestore(&priv->tx_ba_stream_tbl_lock, flags); + } +} + +/* + * This function handles the command response of an add BA response. + * + * Handling includes changing the header fields into CPU format and + * creating the stream, provided the add BA is accepted. + */ +int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct host_cmd_ds_11n_addba_rsp *add_ba_rsp = + (struct host_cmd_ds_11n_addba_rsp *) + &resp->params.add_ba_rsp; + int tid, win_size; + struct mwifiex_rx_reorder_tbl *rx_reor_tbl_ptr = NULL; + uint16_t block_ack_param_set; + + block_ack_param_set = le16_to_cpu(add_ba_rsp->block_ack_param_set); + + tid = (block_ack_param_set & IEEE80211_ADDBA_PARAM_TID_MASK) + >> BLOCKACKPARAM_TID_POS; + /* + * Check if we had rejected the ADDBA, if yes then do not create + * the stream + */ + if (le16_to_cpu(add_ba_rsp->status_code) == BA_RESULT_SUCCESS) { + win_size = (block_ack_param_set & + IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) + >> BLOCKACKPARAM_WINSIZE_POS; + + dev_dbg(priv->adapter->dev, "cmd: ADDBA RSP: %pM" + " tid=%d ssn=%d win_size=%d\n", + add_ba_rsp->peer_mac_addr, + tid, add_ba_rsp->ssn, win_size); + } else { + dev_err(priv->adapter->dev, "ADDBA RSP: failed %pM tid=%d)\n", + add_ba_rsp->peer_mac_addr, tid); + + rx_reor_tbl_ptr = mwifiex_11n_get_rx_reorder_tbl(priv, + tid, add_ba_rsp->peer_mac_addr); + if (rx_reor_tbl_ptr) + mwifiex_11n_delete_rx_reorder_tbl_entry(priv, + rx_reor_tbl_ptr); + } + + return 0; +} + +/* + * This function handles BA stream timeout event by preparing and sending + * a command to the firmware. + */ +void mwifiex_11n_ba_stream_timeout(struct mwifiex_private *priv, + struct host_cmd_ds_11n_batimeout *event) +{ + struct host_cmd_ds_11n_delba delba; + + memset(&delba, 0, sizeof(struct host_cmd_ds_11n_delba)); + memcpy(delba.peer_mac_addr, event->peer_mac_addr, ETH_ALEN); + + delba.del_ba_param_set |= + cpu_to_le16((u16) event->tid << DELBA_TID_POS); + delba.del_ba_param_set |= cpu_to_le16( + (u16) event->origninator << DELBA_INITIATOR_POS); + delba.reason_code = cpu_to_le16(WLAN_REASON_QSTA_TIMEOUT); + mwifiex_prepare_cmd(priv, HostCmd_CMD_11N_DELBA, 0, 0, NULL, &delba); + + return; +} + +/* + * This function cleans up the Rx reorder table by deleting all the entries + * and re-initializing. + */ +void mwifiex_11n_cleanup_reorder_tbl(struct mwifiex_private *priv) +{ + struct mwifiex_rx_reorder_tbl *del_tbl_ptr, *tmp_node; + unsigned long flags; + + spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags); + list_for_each_entry_safe(del_tbl_ptr, tmp_node, + &priv->rx_reorder_tbl_ptr, list) { + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); + mwifiex_11n_delete_rx_reorder_tbl_entry(priv, del_tbl_ptr); + spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags); + } + spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags); + + INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr); + memset(priv->rx_seq, 0, sizeof(priv->rx_seq)); +} diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.h b/drivers/net/wireless/mwifiex/11n_rxreorder.h new file mode 100644 index 000000000000..42f569035745 --- /dev/null +++ b/drivers/net/wireless/mwifiex/11n_rxreorder.h @@ -0,0 +1,67 @@ +/* + * Marvell Wireless LAN device driver: 802.11n RX Re-ordering + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_11N_RXREORDER_H_ +#define _MWIFIEX_11N_RXREORDER_H_ + +#define MIN_FLUSH_TIMER_MS 50 + +#define PKT_TYPE_BAR 0xE7 +#define MAX_TID_VALUE (2 << 11) +#define TWOPOW11 (2 << 10) + +#define BLOCKACKPARAM_TID_POS 2 +#define BLOCKACKPARAM_AMSDU_SUPP_MASK 0x1 +#define BLOCKACKPARAM_WINSIZE_POS 6 +#define DELBA_TID_POS 12 +#define DELBA_INITIATOR_POS 11 +#define TYPE_DELBA_SENT 1 +#define TYPE_DELBA_RECEIVE 2 +#define IMMEDIATE_BLOCK_ACK 0x2 + +#define ADDBA_RSP_STATUS_ACCEPT 0 + +int mwifiex_11n_rx_reorder_pkt(struct mwifiex_private *, + u16 seqNum, + u16 tid, u8 *ta, + u8 pkttype, void *payload); +void mwifiex_11n_delete_ba_stream_tbl(struct mwifiex_private *priv, int Tid, + u8 *PeerMACAddr, u8 type, + int initiator); +void mwifiex_11n_ba_stream_timeout(struct mwifiex_private *priv, + struct host_cmd_ds_11n_batimeout *event); +int mwifiex_ret_11n_addba_resp(struct mwifiex_private *priv, + struct host_cmd_ds_command + *resp); +int mwifiex_cmd_11n_delba(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf); +int mwifiex_cmd_11n_addba_rsp_gen(struct mwifiex_private *priv, + struct host_cmd_ds_command + *cmd, void *data_buf); +int mwifiex_cmd_11n_addba_req(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf); +void mwifiex_11n_cleanup_reorder_tbl(struct mwifiex_private *priv); +struct mwifiex_rx_reorder_tbl *mwifiex_11n_get_rxreorder_tbl(struct + mwifiex_private + *priv, int tid, + u8 *ta); + +#endif /* _MWIFIEX_11N_RXREORDER_H_ */ diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig new file mode 100644 index 000000000000..86962920cef3 --- /dev/null +++ b/drivers/net/wireless/mwifiex/Kconfig @@ -0,0 +1,21 @@ +config MWIFIEX + tristate "Marvell WiFi-Ex Driver" + depends on CFG80211 + select LIB80211 + ---help--- + This adds support for wireless adapters based on Marvell + 802.11n chipsets. + + If you choose to build it as a module, it will be called + mwifiex. + +config MWIFIEX_SDIO + tristate "Marvell WiFi-Ex Driver for SD8787" + depends on MWIFIEX && MMC + select FW_LOADER + ---help--- + This adds support for wireless adapters based on Marvell + 8787 chipset with SDIO interface. + + If you choose to build it as a module, it will be called + mwifiex_sdio. diff --git a/drivers/net/wireless/mwifiex/Makefile b/drivers/net/wireless/mwifiex/Makefile new file mode 100644 index 000000000000..42cb733ea33a --- /dev/null +++ b/drivers/net/wireless/mwifiex/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (C) 2011, Marvell International Ltd. +# +# This software file (the "File") is distributed by Marvell International +# Ltd. under the terms of the GNU General Public License Version 2, June 1991 +# (the "License"). You may use, redistribute and/or modify this File in +# accordance with the terms and conditions of the License, a copy of which +# is available by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the +# worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. +# +# THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE +# IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE +# ARE EXPRESSLY DISCLAIMED. The License provides additional details about +# this warranty disclaimer. + + +mwifiex-y += main.o +mwifiex-y += init.o +mwifiex-y += cfp.o +mwifiex-y += cmdevt.o +mwifiex-y += util.o +mwifiex-y += txrx.o +mwifiex-y += wmm.o +mwifiex-y += 11n.o +mwifiex-y += 11n_aggr.o +mwifiex-y += 11n_rxreorder.o +mwifiex-y += scan.o +mwifiex-y += join.o +mwifiex-y += sta_ioctl.o +mwifiex-y += sta_cmd.o +mwifiex-y += sta_cmdresp.o +mwifiex-y += sta_event.o +mwifiex-y += sta_tx.o +mwifiex-y += sta_rx.o +mwifiex-y += cfg80211.o +mwifiex-$(CONFIG_DEBUG_FS) += debugfs.o +obj-$(CONFIG_MWIFIEX) += mwifiex.o + +mwifiex_sdio-y += sdio.o +obj-$(CONFIG_MWIFIEX_SDIO) += mwifiex_sdio.o diff --git a/drivers/net/wireless/mwifiex/README b/drivers/net/wireless/mwifiex/README new file mode 100644 index 000000000000..338377f7093b --- /dev/null +++ b/drivers/net/wireless/mwifiex/README @@ -0,0 +1,204 @@ +# Copyright (C) 2011, Marvell International Ltd. +# +# This software file (the "File") is distributed by Marvell International +# Ltd. under the terms of the GNU General Public License Version 2, June 1991 +# (the "License"). You may use, redistribute and/or modify this File in +# accordance with the terms and conditions of the License, a copy of which +# is available by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the +# worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. +# +# THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE +# IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE +# ARE EXPRESSLY DISCLAIMED. The License provides additional details about +# this warranty disclaimer. + + +=============================================================================== + U S E R M A N U A L + +1) FOR DRIVER INSTALL + + a) Copy sd8787.bin to /lib/firmware/mrvl/ directory, + create the directory if it doesn't exist. + b) Install WLAN driver, + insmod mwifiex.ko + c) Uninstall WLAN driver, + ifconfig mlanX down + rmmod mwifiex + + +2) FOR DRIVER CONFIGURATION AND INFO + The configurations can be done either using the 'iw' user space + utility or debugfs. + + a) 'iw' utility commands + + Following are some useful iw commands:- + +iw dev mlan0 scan + + This command will trigger a scan. + The command will then display the scan table entries + +iw dev mlan0 connect -w <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1123456789a] + The above command can be used to connect to an AP with a particular SSID. + Ap's operating frequency can be specified or even the bssid. If the AP is using + WEP encryption, wep keys can be specified in the command. + Note: Every time before connecting to an AP scan command (iw dev mlan0 scan) should be used by user. + +iw dev mlan0 disconnect + This command will be used to disconnect from an AP. + + +iw dev mlan0 ibss join <SSID> <freq in MHz> [fixed-freq] [fixed-bssid] [key 0:abcde] + The command will be used to join or create an ibss. Optionally, operating frequency, + bssid and the security related parameters can be specified while joining/creating + and ibss. + +iw dev mlan0 ibss leave + The command will be used to leave an ibss network. + +iw dev mlan0 link + The command will be used to get the connection status. The command will return parameters + such as SSID, operating frequency, rx/tx packets, signal strength, tx bitrate. + + Apart from the iw utility all standard configurations using the 'iwconfig' utility are also supported. + + b) Debugfs interface + + The debugfs interface can be used for configurations and for getting + some useful information from the driver. + The section below explains the configurations that can be + done. + + Mount debugfs to /debugfs mount point: + + mkdir /debugfs + mount -t debugfs debugfs /debugfs + + The information is provided in /debugfs/mwifiex/mlanX/: + +iw reg set <country code> + The command will be used to change the regulatory domain. + +iw reg get + The command will be used to get current regulatory domain. + +info + This command is used to get driver info. + + Usage: + cat info + + driver_name = "mwifiex" + driver_version = <driver_name, driver_version, (firmware_version)> + interface_name = "mlanX" + bss_mode = "Ad-hoc" | "Managed" | "Auto" | "Unknown" + media_state = "Disconnected" | "Connected" + mac_address = <6-byte adapter MAC address> + multicase_count = <multicast address count> + essid = <current SSID> + bssid = <current BSSID> + channel = <current channel> + region_code = <current region code> + multicasr_address[n] = <multicast address> + num_tx_bytes = <number of bytes sent to device> + num_rx_bytes = <number of bytes received from device and sent to kernel> + num_tx_pkts = <number of packets sent to device> + num_rx_pkts = <number of packets received from device and sent to kernel> + num_tx_pkts_dropped = <number of Tx packets dropped by driver> + num_rx_pkts_dropped = <number of Rx packets dropped by driver> + num_tx_pkts_err = <number of Tx packets failed to send to device> + num_rx_pkts_err = <number of Rx packets failed to receive from device> + carrier "on" | "off" + tx queue "stopped" | "started" + + The following debug info are provided in /debugfs/mwifiex/mlanX/debug: + + int_counter = <interrupt count, cleared when interrupt handled> + wmm_ac_vo = <number of packets sent to device from WMM AcVo queue> + wmm_ac_vi = <number of packets sent to device from WMM AcVi queue> + wmm_ac_be = <number of packets sent to device from WMM AcBE queue> + wmm_ac_bk = <number of packets sent to device from WMM AcBK queue> + max_tx_buf_size = <maximum Tx buffer size> + tx_buf_size = <current Tx buffer size> + curr_tx_buf_size = <current Tx buffer size> + ps_mode = <0/1, CAM mode/PS mode> + ps_state = <0/1/2/3, full power state/awake state/pre-sleep state/sleep state> + is_deep_sleep = <0/1, not deep sleep state/deep sleep state> + wakeup_dev_req = <0/1, wakeup device not required/required> + wakeup_tries = <wakeup device count, cleared when device awake> + hs_configured = <0/1, host sleep not configured/configured> + hs_activated = <0/1, extended host sleep not activated/activated> + num_tx_timeout = <number of Tx timeout> + num_cmd_timeout = <number of timeout commands> + timeout_cmd_id = <command id of the last timeout command> + timeout_cmd_act = <command action of the last timeout command> + last_cmd_id = <command id of the last several commands sent to device> + last_cmd_act = <command action of the last several commands sent to device> + last_cmd_index = <0 based last command index> + last_cmd_resp_id = <command id of the last several command responses received from device> + last_cmd_resp_index = <0 based last command response index> + last_event = <event id of the last several events received from device> + last_event_index = <0 based last event index> + num_cmd_h2c_fail = <number of commands failed to send to device> + num_cmd_sleep_cfm_fail = <number of sleep confirm failed to send to device> + num_tx_h2c_fail = <number of data packets failed to send to device> + num_evt_deauth = <number of deauthenticated events received from device> + num_evt_disassoc = <number of disassociated events received from device> + num_evt_link_lost = <number of link lost events received from device> + num_cmd_deauth = <number of deauthenticate commands sent to device> + num_cmd_assoc_ok = <number of associate commands with success return> + num_cmd_assoc_fail = <number of associate commands with failure return> + cmd_sent = <0/1, send command resources available/sending command to device> + data_sent = <0/1, send data resources available/sending data to device> + mp_rd_bitmap = <SDIO multi-port read bitmap> + mp_wr_bitmap = <SDIO multi-port write bitmap> + cmd_resp_received = <0/1, no cmd response to process/response received and yet to process> + event_received = <0/1, no event to process/event received and yet to process> + ioctl_pending = <number of ioctl pending> + tx_pending = <number of Tx packet pending> + rx_pending = <number of Rx packet pending> + + +3) FOR DRIVER CONFIGURATION + +regrdwr + This command is used to read/write the adapter register. + + Usage: + echo " <type> <offset> [value]" > regrdwr + cat regrdwr + + where the parameters are, + <type>: 1:MAC/SOC, 2:BBP, 3:RF, 4:PMIC, 5:CAU + <offset>: offset of register + [value]: value to be written + + Examples: + echo "1 0xa060" > regrdwr : Read the MAC register + echo "1 0xa060 0x12" > regrdwr : Write the MAC register + echo "1 0xa794 0x80000000" > regrdwr + : Write 0x80000000 to MAC register +rdeeprom + This command is used to read the EEPROM contents of the card. + + Usage: + echo "<offset> <length>" > rdeeprom + cat rdeeprom + + where the parameters are, + <offset>: multiples of 4 + <length>: 4-20, multiples of 4 + + Example: + echo "0 20" > rdeeprom : Read 20 bytes of EEPROM data from offset 0 + +getlog + This command is used to get the statistics available in the station. + Usage: + + cat getlog + +=============================================================================== diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c new file mode 100644 index 000000000000..ec0895f4e8d3 --- /dev/null +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -0,0 +1,1456 @@ +/* + * Marvell Wireless LAN device driver: CFG80211 + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "cfg80211.h" +#include "main.h" + +/* + * This function maps the nl802.11 channel type into driver channel type. + * + * The mapping is as follows - + * NL80211_CHAN_NO_HT -> NO_SEC_CHANNEL + * NL80211_CHAN_HT20 -> NO_SEC_CHANNEL + * NL80211_CHAN_HT40PLUS -> SEC_CHANNEL_ABOVE + * NL80211_CHAN_HT40MINUS -> SEC_CHANNEL_BELOW + * Others -> NO_SEC_CHANNEL + */ +static int +mwifiex_cfg80211_channel_type_to_mwifiex_channels(enum nl80211_channel_type + channel_type) +{ + int channel; + switch (channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: + channel = NO_SEC_CHANNEL; + break; + case NL80211_CHAN_HT40PLUS: + channel = SEC_CHANNEL_ABOVE; + break; + case NL80211_CHAN_HT40MINUS: + channel = SEC_CHANNEL_BELOW; + break; + default: + channel = NO_SEC_CHANNEL; + } + return channel; +} + +/* + * This function maps the driver channel type into nl802.11 channel type. + * + * The mapping is as follows - + * NO_SEC_CHANNEL -> NL80211_CHAN_HT20 + * SEC_CHANNEL_ABOVE -> NL80211_CHAN_HT40PLUS + * SEC_CHANNEL_BELOW -> NL80211_CHAN_HT40MINUS + * Others -> NL80211_CHAN_HT20 + */ +static enum nl80211_channel_type +mwifiex_channels_to_cfg80211_channel_type(int channel_type) +{ + int channel; + switch (channel_type) { + case NO_SEC_CHANNEL: + channel = NL80211_CHAN_HT20; + break; + case SEC_CHANNEL_ABOVE: + channel = NL80211_CHAN_HT40PLUS; + break; + case SEC_CHANNEL_BELOW: + channel = NL80211_CHAN_HT40MINUS; + break; + default: + channel = NL80211_CHAN_HT20; + } + return channel; +} + +/* + * This function checks whether WEP is set. + */ +static int +mwifiex_is_alg_wep(u32 cipher) +{ + int alg = 0; + + switch (cipher) { + case WLAN_CIPHER_SUITE_WEP40: + case WLAN_CIPHER_SUITE_WEP104: + alg = 1; + break; + default: + alg = 0; + break; + } + return alg; +} + +/* + * This function retrieves the private structure from kernel wiphy structure. + */ +static void *mwifiex_cfg80211_get_priv(struct wiphy *wiphy) +{ + return (void *) (*(unsigned long *) wiphy_priv(wiphy)); +} + +/* + * CFG802.11 operation handler to delete a network key. + */ +static int +mwifiex_cfg80211_del_key(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool pairwise, const u8 *mac_addr) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + int ret = 0; + + ret = mwifiex_set_encode(priv, NULL, 0, key_index, 1); + if (ret) { + wiphy_err(wiphy, "deleting the crypto keys\n"); + return -EFAULT; + } + + wiphy_dbg(wiphy, "info: crypto keys deleted\n"); + return 0; +} + +/* + * CFG802.11 operation handler to set Tx power. + */ +static int +mwifiex_cfg80211_set_tx_power(struct wiphy *wiphy, + enum nl80211_tx_power_setting type, + int dbm) +{ + int ret = 0; + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + + ret = mwifiex_set_tx_power(priv, type, dbm); + + return ret; +} + +/* + * CFG802.11 operation handler to set Power Save option. + * + * The timeout value, if provided, is currently ignored. + */ +static int +mwifiex_cfg80211_set_power_mgmt(struct wiphy *wiphy, + struct net_device *dev, + bool enabled, int timeout) +{ + int ret = 0; + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + + if (timeout) + wiphy_dbg(wiphy, + "info: ignoring the timeout value" + " for IEEE power save\n"); + + ret = mwifiex_drv_set_power(priv, enabled); + + return ret; +} + +/* + * CFG802.11 operation handler to set the default network key. + */ +static int +mwifiex_cfg80211_set_default_key(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool unicast, + bool multicast) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + int ret; + + /* Return if WEP key not configured */ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED) + return 0; + + ret = mwifiex_set_encode(priv, NULL, 0, key_index, 0); + + wiphy_dbg(wiphy, "info: set default Tx key index\n"); + + if (ret) + return -EFAULT; + + return 0; +} + +/* + * CFG802.11 operation handler to add a network key. + */ +static int +mwifiex_cfg80211_add_key(struct wiphy *wiphy, struct net_device *netdev, + u8 key_index, bool pairwise, const u8 *mac_addr, + struct key_params *params) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + int ret = 0; + + ret = mwifiex_set_encode(priv, params->key, params->key_len, + key_index, 0); + + wiphy_dbg(wiphy, "info: crypto keys added\n"); + + if (ret) + return -EFAULT; + + return 0; +} + +/* + * This function sends domain information to the firmware. + * + * The following information are passed to the firmware - + * - Country codes + * - Sub bands (first channel, number of channels, maximum Tx power) + */ +static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy) +{ + u8 no_of_triplet = 0; + struct ieee80211_country_ie_triplet *t; + u8 no_of_parsed_chan = 0; + u8 first_chan = 0, next_chan = 0, max_pwr = 0; + u8 i, flag = 0; + enum ieee80211_band band; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *ch; + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_802_11d_domain_reg *domain_info = &adapter->domain_reg; + int ret = 0; + + /* Set country code */ + domain_info->country_code[0] = priv->country_code[0]; + domain_info->country_code[1] = priv->country_code[1]; + domain_info->country_code[2] = ' '; + + band = mwifiex_band_to_radio_type(adapter->config_bands); + if (!wiphy->bands[band]) { + wiphy_err(wiphy, "11D: setting domain info in FW\n"); + return -1; + } + + sband = wiphy->bands[band]; + + for (i = 0; i < sband->n_channels ; i++) { + ch = &sband->channels[i]; + if (ch->flags & IEEE80211_CHAN_DISABLED) + continue; + + if (!flag) { + flag = 1; + first_chan = (u32) ch->hw_value; + next_chan = first_chan; + max_pwr = ch->max_power; + no_of_parsed_chan = 1; + continue; + } + + if (ch->hw_value == next_chan + 1 && + ch->max_power == max_pwr) { + next_chan++; + no_of_parsed_chan++; + } else { + t = &domain_info->triplet[no_of_triplet]; + t->chans.first_channel = first_chan; + t->chans.num_channels = no_of_parsed_chan; + t->chans.max_power = max_pwr; + no_of_triplet++; + first_chan = (u32) ch->hw_value; + next_chan = first_chan; + max_pwr = ch->max_power; + no_of_parsed_chan = 1; + } + } + + if (flag) { + t = &domain_info->triplet[no_of_triplet]; + t->chans.first_channel = first_chan; + t->chans.num_channels = no_of_parsed_chan; + t->chans.max_power = max_pwr; + no_of_triplet++; + } + + domain_info->no_of_triplet = no_of_triplet; + /* Send cmd to FW to set domain info */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11D_DOMAIN_INFO, + HostCmd_ACT_GEN_SET, 0, NULL, NULL); + if (ret) + wiphy_err(wiphy, "11D: setting domain info in FW\n"); + + return ret; +} + +/* + * CFG802.11 regulatory domain callback function. + * + * This function is called when the regulatory domain is changed due to the + * following reasons - + * - Set by driver + * - Set by system core + * - Set by user + * - Set bt Country IE + */ +static int mwifiex_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + + wiphy_dbg(wiphy, "info: cfg80211 regulatory domain callback for domain" + " %c%c\n", request->alpha2[0], request->alpha2[1]); + + memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); + + switch (request->initiator) { + case NL80211_REGDOM_SET_BY_DRIVER: + case NL80211_REGDOM_SET_BY_CORE: + case NL80211_REGDOM_SET_BY_USER: + break; + /* Todo: apply driver specific changes in channel flags based + on the request initiator if necessary. */ + case NL80211_REGDOM_SET_BY_COUNTRY_IE: + break; + } + mwifiex_send_domain_info_cmd_fw(wiphy); + + return 0; +} + +/* + * This function sets the RF channel. + * + * This function creates multiple IOCTL requests, populates them accordingly + * and issues them to set the band/channel and frequency. + */ +static int +mwifiex_set_rf_channel(struct mwifiex_private *priv, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + struct mwifiex_chan_freq_power cfp; + int ret = 0; + int status = 0; + struct mwifiex_ds_band_cfg band_cfg; + u32 config_bands = 0; + struct wiphy *wiphy = priv->wdev->wiphy; + + if (chan) { + memset(&band_cfg, 0, sizeof(band_cfg)); + /* Set appropriate bands */ + if (chan->band == IEEE80211_BAND_2GHZ) + config_bands = BAND_B | BAND_G | BAND_GN; + else + config_bands = BAND_AN | BAND_A; + if (priv->bss_mode == NL80211_IFTYPE_STATION + || priv->bss_mode == NL80211_IFTYPE_UNSPECIFIED) { + band_cfg.config_bands = config_bands; + } else if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + band_cfg.config_bands = config_bands; + band_cfg.adhoc_start_band = config_bands; + } + /* Set channel offset */ + band_cfg.sec_chan_offset = + mwifiex_cfg80211_channel_type_to_mwifiex_channels + (channel_type); + status = mwifiex_radio_ioctl_band_cfg(priv, HostCmd_ACT_GEN_SET, + &band_cfg); + + if (status) + return -EFAULT; + mwifiex_send_domain_info_cmd_fw(wiphy); + } + + wiphy_dbg(wiphy, "info: setting band %d, channel offset %d and " + "mode %d\n", config_bands, band_cfg.sec_chan_offset, + priv->bss_mode); + if (!chan) + return ret; + + memset(&cfp, 0, sizeof(cfp)); + cfp.freq = chan->center_freq; + /* Convert frequency to channel */ + cfp.channel = ieee80211_frequency_to_channel(chan->center_freq); + + status = mwifiex_bss_ioctl_channel(priv, HostCmd_ACT_GEN_SET, &cfp); + if (status) + return -EFAULT; + + ret = mwifiex_drv_change_adhoc_chan(priv, cfp.channel); + + return ret; +} + +/* + * CFG802.11 operation handler to set channel. + * + * This function can only be used when station is not connected. + */ +static int +mwifiex_cfg80211_set_channel(struct wiphy *wiphy, struct net_device *dev, + struct ieee80211_channel *chan, + enum nl80211_channel_type channel_type) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + + if (priv->media_connected) { + wiphy_err(wiphy, "This setting is valid only when station " + "is not connected\n"); + return -EINVAL; + } + + return mwifiex_set_rf_channel(priv, chan, channel_type); +} + +/* + * This function sets the fragmentation threshold. + * + * This function creates an IOCTL request, populates it accordingly + * and issues an IOCTL. + * + * The fragmentation threshold value must lies between MWIFIEX_FRAG_MIN_VALUE + * and MWIFIEX_FRAG_MAX_VALUE. + */ +static int +mwifiex_set_frag(struct mwifiex_private *priv, u32 frag_thr) +{ + int ret = 0; + int status = 0; + struct mwifiex_wait_queue *wait = NULL; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + + if (frag_thr < MWIFIEX_FRAG_MIN_VALUE + || frag_thr > MWIFIEX_FRAG_MAX_VALUE) + return -EINVAL; + + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_snmp_mib_ioctl(priv, wait, FRAG_THRESH_I, + HostCmd_ACT_GEN_SET, &frag_thr); + + if (mwifiex_request_ioctl(priv, wait, status, wait_option)) + ret = -EFAULT; + + kfree(wait); + return ret; +} + +/* + * This function sets the RTS threshold. + * + * This function creates an IOCTL request, populates it accordingly + * and issues an IOCTL. + */ +static int +mwifiex_set_rts(struct mwifiex_private *priv, u32 rts_thr) +{ + int ret = 0; + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + + if (rts_thr < MWIFIEX_RTS_MIN_VALUE || rts_thr > MWIFIEX_RTS_MAX_VALUE) + rts_thr = MWIFIEX_RTS_MAX_VALUE; + + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_snmp_mib_ioctl(priv, wait, RTS_THRESH_I, + HostCmd_ACT_GEN_SET, &rts_thr); + + if (mwifiex_request_ioctl(priv, wait, status, wait_option)) + ret = -EFAULT; + + kfree(wait); + return ret; +} + +/* + * CFG802.11 operation handler to set wiphy parameters. + * + * This function can be used to set the RTS threshold and the + * Fragmentation threshold of the driver. + */ +static int +mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + + int ret = 0; + + if (changed & WIPHY_PARAM_RTS_THRESHOLD) + ret = mwifiex_set_rts(priv, wiphy->rts_threshold); + + if (changed & WIPHY_PARAM_FRAG_THRESHOLD) + ret = mwifiex_set_frag(priv, wiphy->frag_threshold); + + return ret; +} + +/* + * CFG802.11 operation handler to change interface type. + */ +static int +mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy, + struct net_device *dev, + enum nl80211_iftype type, u32 *flags, + struct vif_params *params) +{ + int ret = 0; + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + struct mwifiex_wait_queue *wait = NULL; + + if (priv->bss_mode == type) { + wiphy_warn(wiphy, "already set to required type\n"); + return 0; + } + + priv->bss_mode = type; + + switch (type) { + case NL80211_IFTYPE_ADHOC: + dev->ieee80211_ptr->iftype = NL80211_IFTYPE_ADHOC; + wiphy_dbg(wiphy, "info: setting interface type to adhoc\n"); + break; + case NL80211_IFTYPE_STATION: + dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION; + wiphy_dbg(wiphy, "info: setting interface type to managed\n"); + break; + case NL80211_IFTYPE_UNSPECIFIED: + dev->ieee80211_ptr->iftype = NL80211_IFTYPE_STATION; + wiphy_dbg(wiphy, "info: setting interface type to auto\n"); + return 0; + default: + wiphy_err(wiphy, "unknown interface type: %d\n", type); + return -EINVAL; + } + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + mwifiex_deauthenticate(priv, wait, NULL); + + priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM; + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_SET_BSS_MODE, + HostCmd_ACT_GEN_SET, 0, wait, NULL); + if (!ret) + ret = -EINPROGRESS; + + ret = mwifiex_request_ioctl(priv, wait, ret, MWIFIEX_IOCTL_WAIT); + if (ret) + ret = -EFAULT; + + kfree(wait); + return ret; +} + +/* + * This function dumps the station information on a buffer. + * + * The following information are shown - + * - Total bytes transmitted + * - Total bytes received + * - Total packets transmitted + * - Total packets received + * - Signal quality level + * - Transmission rate + */ +static int +mwifiex_dump_station_info(struct mwifiex_private *priv, + struct station_info *sinfo) +{ + struct mwifiex_ds_get_signal signal; + struct mwifiex_rate_cfg rate; + int ret = 0; + + sinfo->filled = STATION_INFO_RX_BYTES | STATION_INFO_TX_BYTES | + STATION_INFO_RX_PACKETS | + STATION_INFO_TX_PACKETS + | STATION_INFO_SIGNAL | STATION_INFO_TX_BITRATE; + + /* Get signal information from the firmware */ + memset(&signal, 0, sizeof(struct mwifiex_ds_get_signal)); + if (mwifiex_get_signal_info(priv, MWIFIEX_IOCTL_WAIT, &signal)) { + dev_err(priv->adapter->dev, "getting signal information\n"); + ret = -EFAULT; + } + + if (mwifiex_drv_get_data_rate(priv, &rate)) { + dev_err(priv->adapter->dev, "getting data rate\n"); + ret = -EFAULT; + } + + sinfo->rx_bytes = priv->stats.rx_bytes; + sinfo->tx_bytes = priv->stats.tx_bytes; + sinfo->rx_packets = priv->stats.rx_packets; + sinfo->tx_packets = priv->stats.tx_packets; + sinfo->signal = priv->w_stats.qual.level; + sinfo->txrate.legacy = rate.rate; + + return ret; +} + +/* + * CFG802.11 operation handler to get station information. + * + * This function only works in connected mode, and dumps the + * requested station information, if available. + */ +static int +mwifiex_cfg80211_get_station(struct wiphy *wiphy, struct net_device *dev, + u8 *mac, struct station_info *sinfo) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + int ret = 0; + + mwifiex_dump_station_info(priv, sinfo); + + if (!priv->media_connected) + return -ENOENT; + if (memcmp(mac, priv->cfg_bssid, ETH_ALEN)) + return -ENOENT; + + + ret = mwifiex_dump_station_info(priv, sinfo); + + return ret; +} + +/* Supported rates to be advertised to the cfg80211 */ + +static struct ieee80211_rate mwifiex_rates[] = { + {.bitrate = 10, .hw_value = 2, }, + {.bitrate = 20, .hw_value = 4, }, + {.bitrate = 55, .hw_value = 11, }, + {.bitrate = 110, .hw_value = 22, }, + {.bitrate = 220, .hw_value = 44, }, + {.bitrate = 60, .hw_value = 12, }, + {.bitrate = 90, .hw_value = 18, }, + {.bitrate = 120, .hw_value = 24, }, + {.bitrate = 180, .hw_value = 36, }, + {.bitrate = 240, .hw_value = 48, }, + {.bitrate = 360, .hw_value = 72, }, + {.bitrate = 480, .hw_value = 96, }, + {.bitrate = 540, .hw_value = 108, }, + {.bitrate = 720, .hw_value = 144, }, +}; + +/* Channel definitions to be advertised to cfg80211 */ + +static struct ieee80211_channel mwifiex_channels_2ghz[] = { + {.center_freq = 2412, .hw_value = 1, }, + {.center_freq = 2417, .hw_value = 2, }, + {.center_freq = 2422, .hw_value = 3, }, + {.center_freq = 2427, .hw_value = 4, }, + {.center_freq = 2432, .hw_value = 5, }, + {.center_freq = 2437, .hw_value = 6, }, + {.center_freq = 2442, .hw_value = 7, }, + {.center_freq = 2447, .hw_value = 8, }, + {.center_freq = 2452, .hw_value = 9, }, + {.center_freq = 2457, .hw_value = 10, }, + {.center_freq = 2462, .hw_value = 11, }, + {.center_freq = 2467, .hw_value = 12, }, + {.center_freq = 2472, .hw_value = 13, }, + {.center_freq = 2484, .hw_value = 14, }, +}; + +static struct ieee80211_supported_band mwifiex_band_2ghz = { + .channels = mwifiex_channels_2ghz, + .n_channels = ARRAY_SIZE(mwifiex_channels_2ghz), + .bitrates = mwifiex_rates, + .n_bitrates = 14, +}; + +static struct ieee80211_channel mwifiex_channels_5ghz[] = { + {.center_freq = 5040, .hw_value = 8, }, + {.center_freq = 5060, .hw_value = 12, }, + {.center_freq = 5080, .hw_value = 16, }, + {.center_freq = 5170, .hw_value = 34, }, + {.center_freq = 5190, .hw_value = 38, }, + {.center_freq = 5210, .hw_value = 42, }, + {.center_freq = 5230, .hw_value = 46, }, + {.center_freq = 5180, .hw_value = 36, }, + {.center_freq = 5200, .hw_value = 40, }, + {.center_freq = 5220, .hw_value = 44, }, + {.center_freq = 5240, .hw_value = 48, }, + {.center_freq = 5260, .hw_value = 52, }, + {.center_freq = 5280, .hw_value = 56, }, + {.center_freq = 5300, .hw_value = 60, }, + {.center_freq = 5320, .hw_value = 64, }, + {.center_freq = 5500, .hw_value = 100, }, + {.center_freq = 5520, .hw_value = 104, }, + {.center_freq = 5540, .hw_value = 108, }, + {.center_freq = 5560, .hw_value = 112, }, + {.center_freq = 5580, .hw_value = 116, }, + {.center_freq = 5600, .hw_value = 120, }, + {.center_freq = 5620, .hw_value = 124, }, + {.center_freq = 5640, .hw_value = 128, }, + {.center_freq = 5660, .hw_value = 132, }, + {.center_freq = 5680, .hw_value = 136, }, + {.center_freq = 5700, .hw_value = 140, }, + {.center_freq = 5745, .hw_value = 149, }, + {.center_freq = 5765, .hw_value = 153, }, + {.center_freq = 5785, .hw_value = 157, }, + {.center_freq = 5805, .hw_value = 161, }, + {.center_freq = 5825, .hw_value = 165, }, +}; + +static struct ieee80211_supported_band mwifiex_band_5ghz = { + .channels = mwifiex_channels_5ghz, + .n_channels = ARRAY_SIZE(mwifiex_channels_5ghz), + .bitrates = mwifiex_rates - 4, + .n_bitrates = ARRAY_SIZE(mwifiex_rates) + 4, +}; + + +/* Supported crypto cipher suits to be advertised to cfg80211 */ + +static const u32 mwifiex_cipher_suites[] = { + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, +}; + +/* + * CFG802.11 operation handler for disconnection request. + * + * This function does not work when there is already a disconnection + * procedure going on. + */ +static int +mwifiex_cfg80211_disconnect(struct wiphy *wiphy, struct net_device *dev, + u16 reason_code) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + + if (priv->disconnect) + return -EBUSY; + + priv->disconnect = 1; + if (mwifiex_disconnect(priv, MWIFIEX_IOCTL_WAIT, NULL)) + return -EFAULT; + + wiphy_dbg(wiphy, "info: successfully disconnected from %pM:" + " reason code %d\n", priv->cfg_bssid, reason_code); + + queue_work(priv->workqueue, &priv->cfg_workqueue); + + return 0; +} + +/* + * This function informs the CFG802.11 subsystem of a new IBSS. + * + * The following information are sent to the CFG802.11 subsystem + * to register the new IBSS. If we do not register the new IBSS, + * a kernel panic will result. + * - SSID + * - SSID length + * - BSSID + * - Channel + */ +static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv) +{ + int ret = 0; + struct ieee80211_channel *chan; + struct mwifiex_bss_info bss_info; + int ie_len = 0; + u8 ie_buf[IEEE80211_MAX_SSID_LEN + sizeof(struct ieee_types_header)]; + + ret = mwifiex_get_bss_info(priv, &bss_info); + if (ret) + return ret; + + ie_buf[0] = WLAN_EID_SSID; + ie_buf[1] = bss_info.ssid.ssid_len; + + memcpy(&ie_buf[sizeof(struct ieee_types_header)], + &bss_info.ssid.ssid, + bss_info.ssid.ssid_len); + ie_len = ie_buf[1] + sizeof(struct ieee_types_header); + + chan = __ieee80211_get_channel(priv->wdev->wiphy, + ieee80211_channel_to_frequency(bss_info.bss_chan, + priv->curr_bss_params.band)); + + cfg80211_inform_bss(priv->wdev->wiphy, chan, + bss_info.bssid, 0, WLAN_CAPABILITY_IBSS, + 0, ie_buf, ie_len, 0, GFP_KERNEL); + memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN); + + return ret; +} + +/* + * This function informs the CFG802.11 subsystem of a new BSS connection. + * + * The following information are sent to the CFG802.11 subsystem + * to register the new BSS connection. If we do not register the new BSS, + * a kernel panic will result. + * - MAC address + * - Capabilities + * - Beacon period + * - RSSI value + * - Channel + * - Supported rates IE + * - Extended capabilities IE + * - DS parameter set IE + * - HT Capability IE + * - Vendor Specific IE (221) + * - WPA IE + * - RSN IE + */ +static int mwifiex_inform_bss_from_scan_result(struct mwifiex_private *priv, + struct mwifiex_802_11_ssid *ssid) +{ + struct mwifiex_scan_resp scan_resp; + struct mwifiex_bssdescriptor *scan_table; + int i, j; + struct ieee80211_channel *chan; + u8 *ie, *tmp, *ie_buf; + u32 ie_len; + u64 ts = 0; + u8 *beacon; + int beacon_size; + u8 element_id, element_len; + + memset(&scan_resp, 0, sizeof(scan_resp)); + if (mwifiex_get_scan_table(priv, MWIFIEX_IOCTL_WAIT, &scan_resp)) + return -EFAULT; + +#define MAX_IE_BUF 2048 + ie_buf = kzalloc(MAX_IE_BUF, GFP_KERNEL); + if (!ie_buf) { + dev_err(priv->adapter->dev, "%s: failed to alloc ie_buf\n", + __func__); + return -ENOMEM; + } + + scan_table = (struct mwifiex_bssdescriptor *) scan_resp.scan_table; + for (i = 0; i < scan_resp.num_in_scan_table; i++) { + if (ssid) { + /* Inform specific BSS only */ + if (memcmp(ssid->ssid, scan_table[i].ssid.ssid, + ssid->ssid_len)) + continue; + } + memset(ie_buf, 0, MAX_IE_BUF); + ie_buf[0] = WLAN_EID_SSID; + ie_buf[1] = scan_table[i].ssid.ssid_len; + memcpy(&ie_buf[sizeof(struct ieee_types_header)], + scan_table[i].ssid.ssid, ie_buf[1]); + + ie = ie_buf + ie_buf[1] + sizeof(struct ieee_types_header); + ie_len = ie_buf[1] + sizeof(struct ieee_types_header); + + ie[0] = WLAN_EID_SUPP_RATES; + + for (j = 0; j < sizeof(scan_table[i].supported_rates); j++) { + if (!scan_table[i].supported_rates[j]) + break; + else + ie[j + sizeof(struct ieee_types_header)] = + scan_table[i].supported_rates[j]; + } + + ie[1] = j; + ie_len += ie[1] + sizeof(struct ieee_types_header); + + beacon = scan_table[i].beacon_buf; + beacon_size = scan_table[i].beacon_buf_size; + + /* Skip time stamp, beacon interval and capability */ + + if (beacon) { + beacon += sizeof(scan_table[i].beacon_period) + + sizeof(scan_table[i].time_stamp) + + +sizeof(scan_table[i].cap_info_bitmap); + + beacon_size -= sizeof(scan_table[i].beacon_period) + + sizeof(scan_table[i].time_stamp) + + sizeof(scan_table[i].cap_info_bitmap); + } + + while (beacon_size >= sizeof(struct ieee_types_header)) { + ie = ie_buf + ie_len; + element_id = *beacon; + element_len = *(beacon + 1); + if (beacon_size < (int) element_len + + sizeof(struct ieee_types_header)) { + dev_err(priv->adapter->dev, "%s: in processing" + " IE, bytes left < IE length\n", + __func__); + break; + } + switch (element_id) { + case WLAN_EID_EXT_CAPABILITY: + case WLAN_EID_DS_PARAMS: + case WLAN_EID_HT_CAPABILITY: + case WLAN_EID_VENDOR_SPECIFIC: + case WLAN_EID_RSN: + case WLAN_EID_BSS_AC_ACCESS_DELAY: + ie[0] = element_id; + ie[1] = element_len; + tmp = (u8 *) beacon; + memcpy(&ie[sizeof(struct ieee_types_header)], + tmp + sizeof(struct ieee_types_header), + element_len); + ie_len += ie[1] + + sizeof(struct ieee_types_header); + break; + default: + break; + } + beacon += element_len + + sizeof(struct ieee_types_header); + beacon_size -= element_len + + sizeof(struct ieee_types_header); + } + chan = ieee80211_get_channel(priv->wdev->wiphy, + scan_table[i].freq); + cfg80211_inform_bss(priv->wdev->wiphy, chan, + scan_table[i].mac_address, + ts, scan_table[i].cap_info_bitmap, + scan_table[i].beacon_period, + ie_buf, ie_len, + scan_table[i].rssi, GFP_KERNEL); + } + + kfree(ie_buf); + return 0; +} + +/* + * This function connects with a BSS. + * + * This function handles both Infra and Ad-Hoc modes. It also performs + * validity checking on the provided parameters, disconnects from the + * current BSS (if any), sets up the association/scan parameters, + * including security settings, and performs specific SSID scan before + * trying to connect. + * + * For Infra mode, the function returns failure if the specified SSID + * is not found in scan table. However, for Ad-Hoc mode, it can create + * the IBSS if it does not exist. On successful completion in either case, + * the function notifies the CFG802.11 subsystem of the new BSS connection, + * otherwise the kernel will panic. + */ +static int +mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, + u8 *bssid, int mode, struct ieee80211_channel *channel, + struct cfg80211_connect_params *sme, bool privacy) +{ + struct mwifiex_802_11_ssid req_ssid; + struct mwifiex_ssid_bssid ssid_bssid; + int ret = 0; + int auth_type = 0, pairwise_encrypt_mode = 0; + int group_encrypt_mode = 0; + int alg_is_wep = 0; + + memset(&req_ssid, 0, sizeof(struct mwifiex_802_11_ssid)); + memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid)); + + req_ssid.ssid_len = ssid_len; + if (ssid_len > IEEE80211_MAX_SSID_LEN) { + dev_err(priv->adapter->dev, "invalid SSID - aborting\n"); + return -EINVAL; + } + + memcpy(req_ssid.ssid, ssid, ssid_len); + if (!req_ssid.ssid_len || req_ssid.ssid[0] < 0x20) { + dev_err(priv->adapter->dev, "invalid SSID - aborting\n"); + return -EINVAL; + } + + /* disconnect before try to associate */ + mwifiex_disconnect(priv, MWIFIEX_IOCTL_WAIT, NULL); + + if (channel) + ret = mwifiex_set_rf_channel(priv, channel, + mwifiex_channels_to_cfg80211_channel_type + (priv->adapter->chan_offset)); + + ret = mwifiex_set_encode(priv, NULL, 0, 0, 1); /* Disable keys */ + + if (mode == NL80211_IFTYPE_ADHOC) { + /* "privacy" is set only for ad-hoc mode */ + if (privacy) { + /* + * Keep WLAN_CIPHER_SUITE_WEP104 for now so that + * the firmware can find a matching network from the + * scan. The cfg80211 does not give us the encryption + * mode at this stage so just setting it to WEP here. + */ + priv->sec_info.encryption_mode = + WLAN_CIPHER_SUITE_WEP104; + priv->sec_info.authentication_mode = + NL80211_AUTHTYPE_OPEN_SYSTEM; + } + + goto done; + } + + /* Now handle infra mode. "sme" is valid for infra mode only */ + if (sme->auth_type == NL80211_AUTHTYPE_AUTOMATIC + || sme->auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM) + auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM; + else if (sme->auth_type == NL80211_AUTHTYPE_SHARED_KEY) + auth_type = NL80211_AUTHTYPE_SHARED_KEY; + + if (sme->crypto.n_ciphers_pairwise) { + priv->sec_info.encryption_mode = + sme->crypto.ciphers_pairwise[0]; + priv->sec_info.authentication_mode = auth_type; + } + + if (sme->crypto.cipher_group) { + priv->sec_info.encryption_mode = sme->crypto.cipher_group; + priv->sec_info.authentication_mode = auth_type; + } + if (sme->ie) + ret = mwifiex_set_gen_ie(priv, sme->ie, sme->ie_len); + + if (sme->key) { + alg_is_wep = mwifiex_is_alg_wep(pairwise_encrypt_mode) + | mwifiex_is_alg_wep(group_encrypt_mode); + if (alg_is_wep) { + dev_dbg(priv->adapter->dev, + "info: setting wep encryption" + " with key len %d\n", sme->key_len); + ret = mwifiex_set_encode(priv, sme->key, sme->key_len, + sme->key_idx, 0); + } + } +done: + /* Do specific SSID scanning */ + if (mwifiex_request_scan(priv, MWIFIEX_IOCTL_WAIT, &req_ssid)) { + dev_err(priv->adapter->dev, "scan error\n"); + return -EFAULT; + } + + + memcpy(&ssid_bssid.ssid, &req_ssid, sizeof(struct mwifiex_802_11_ssid)); + + if (mode != NL80211_IFTYPE_ADHOC) { + if (mwifiex_find_best_bss(priv, MWIFIEX_IOCTL_WAIT, + &ssid_bssid)) + return -EFAULT; + /* Inform the BSS information to kernel, otherwise + * kernel will give a panic after successful assoc */ + if (mwifiex_inform_bss_from_scan_result(priv, &req_ssid)) + return -EFAULT; + } + + dev_dbg(priv->adapter->dev, "info: trying to associate to %s and bssid %pM\n", + (char *) req_ssid.ssid, ssid_bssid.bssid); + + memcpy(&priv->cfg_bssid, ssid_bssid.bssid, 6); + + /* Connect to BSS by ESSID */ + memset(&ssid_bssid.bssid, 0, ETH_ALEN); + + if (mwifiex_bss_start(priv, MWIFIEX_IOCTL_WAIT, &ssid_bssid)) + return -EFAULT; + + if (mode == NL80211_IFTYPE_ADHOC) { + /* Inform the BSS information to kernel, otherwise + * kernel will give a panic after successful assoc */ + if (mwifiex_cfg80211_inform_ibss_bss(priv)) + return -EFAULT; + } + + return ret; +} + +/* + * CFG802.11 operation handler for association request. + * + * This function does not work when the current mode is set to Ad-Hoc, or + * when there is already an association procedure going on. The given BSS + * information is used to associate. + */ +static int +mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_connect_params *sme) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + int ret = 0; + + if (priv->assoc_request) + return -EBUSY; + + if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + wiphy_err(wiphy, "received infra assoc request " + "when station is in ibss mode\n"); + goto done; + } + + priv->assoc_request = 1; + + wiphy_dbg(wiphy, "info: Trying to associate to %s and bssid %pM\n", + (char *) sme->ssid, sme->bssid); + + ret = mwifiex_cfg80211_assoc(priv, sme->ssid_len, sme->ssid, sme->bssid, + priv->bss_mode, sme->channel, sme, 0); + +done: + priv->assoc_result = ret; + queue_work(priv->workqueue, &priv->cfg_workqueue); + return ret; +} + +/* + * CFG802.11 operation handler to join an IBSS. + * + * This function does not work in any mode other than Ad-Hoc, or if + * a join operation is already in progress. + */ +static int +mwifiex_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + int ret = 0; + + if (priv->ibss_join_request) + return -EBUSY; + + if (priv->bss_mode != NL80211_IFTYPE_ADHOC) { + wiphy_err(wiphy, "request to join ibss received " + "when station is not in ibss mode\n"); + goto done; + } + + priv->ibss_join_request = 1; + + wiphy_dbg(wiphy, "info: trying to join to %s and bssid %pM\n", + (char *) params->ssid, params->bssid); + + ret = mwifiex_cfg80211_assoc(priv, params->ssid_len, params->ssid, + params->bssid, priv->bss_mode, + params->channel, NULL, params->privacy); +done: + priv->ibss_join_result = ret; + queue_work(priv->workqueue, &priv->cfg_workqueue); + return ret; +} + +/* + * CFG802.11 operation handler to leave an IBSS. + * + * This function does not work if a leave operation is + * already in progress. + */ +static int +mwifiex_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) +{ + struct mwifiex_private *priv = mwifiex_cfg80211_get_priv(wiphy); + + if (priv->disconnect) + return -EBUSY; + + priv->disconnect = 1; + + wiphy_dbg(wiphy, "info: disconnecting from essid %pM\n", + priv->cfg_bssid); + if (mwifiex_disconnect(priv, MWIFIEX_IOCTL_WAIT, NULL)) + return -EFAULT; + + queue_work(priv->workqueue, &priv->cfg_workqueue); + + return 0; +} + +/* + * CFG802.11 operation handler for scan request. + * + * This function issues a scan request to the firmware based upon + * the user specified scan configuration. On successfull completion, + * it also informs the results. + */ +static int +mwifiex_cfg80211_scan(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_scan_request *request) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + + wiphy_dbg(wiphy, "info: received scan request on %s\n", dev->name); + + if (priv->scan_request && priv->scan_request != request) + return -EBUSY; + + priv->scan_request = request; + + queue_work(priv->workqueue, &priv->cfg_workqueue); + return 0; +} + +/* + * This function sets up the CFG802.11 specific HT capability fields + * with default values. + * + * The following default values are set - + * - HT Supported = True + * - Maximum AMPDU length factor = 0x3 + * - Minimum AMPDU spacing = 0x6 + * - HT Capabilities map = IEEE80211_HT_CAP_SUP_WIDTH_20_40 (0x0002) + * - MCS information, Rx mask = 0xff + * - MCD information, Tx parameters = IEEE80211_HT_MCS_TX_DEFINED (0x01) + */ +static void +mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info, + struct mwifiex_private *priv) +{ + int rx_mcs_supp; + struct ieee80211_mcs_info mcs_set; + u8 *mcs = (u8 *)&mcs_set; + struct mwifiex_adapter *adapter = priv->adapter; + + ht_info->ht_supported = true; + ht_info->ampdu_factor = 0x3; + ht_info->ampdu_density = 0x6; + + memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); + ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + rx_mcs_supp = GET_RXMCSSUPP(priv->adapter->hw_dev_mcs_support); + /* Set MCS for 1x1 */ + memset(mcs, 0xff, rx_mcs_supp); + /* Clear all the other values */ + memset(&mcs[rx_mcs_supp], 0, + sizeof(struct ieee80211_mcs_info) - rx_mcs_supp); + if (priv->bss_mode == NL80211_IFTYPE_STATION || + ISSUPP_CHANWIDTH40(adapter->hw_dot_11n_dev_cap)) + /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */ + SETHT_MCS32(mcs_set.rx_mask); + + memcpy((u8 *) &ht_info->mcs, mcs, sizeof(struct ieee80211_mcs_info)); + + ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; +} + +/* station cfg80211 operations */ +static struct cfg80211_ops mwifiex_cfg80211_ops = { + .change_virtual_intf = mwifiex_cfg80211_change_virtual_intf, + .scan = mwifiex_cfg80211_scan, + .connect = mwifiex_cfg80211_connect, + .disconnect = mwifiex_cfg80211_disconnect, + .get_station = mwifiex_cfg80211_get_station, + .set_wiphy_params = mwifiex_cfg80211_set_wiphy_params, + .set_channel = mwifiex_cfg80211_set_channel, + .join_ibss = mwifiex_cfg80211_join_ibss, + .leave_ibss = mwifiex_cfg80211_leave_ibss, + .add_key = mwifiex_cfg80211_add_key, + .del_key = mwifiex_cfg80211_del_key, + .set_default_key = mwifiex_cfg80211_set_default_key, + .set_power_mgmt = mwifiex_cfg80211_set_power_mgmt, + .set_tx_power = mwifiex_cfg80211_set_tx_power, +}; + +/* + * This function registers the device with CFG802.11 subsystem. + * + * The function creates the wireless device/wiphy, populates it with + * default parameters and handler function pointers, and finally + * registers the device. + */ +int mwifiex_register_cfg80211(struct net_device *dev, u8 *mac, + struct mwifiex_private *priv) +{ + int ret = 0; + void *wdev_priv = NULL; + struct wireless_dev *wdev; + + wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); + if (!wdev) { + dev_err(priv->adapter->dev, "%s: allocating wireless device\n", + __func__); + return -ENOMEM; + } + wdev->wiphy = + wiphy_new(&mwifiex_cfg80211_ops, + sizeof(struct mwifiex_private *)); + if (!wdev->wiphy) + return -ENOMEM; + wdev->iftype = NL80211_IFTYPE_STATION; + wdev->wiphy->max_scan_ssids = 10; + wdev->wiphy->interface_modes = + BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); + wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &mwifiex_band_2ghz; + wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &mwifiex_band_5ghz; + + /* Initialize cipher suits */ + wdev->wiphy->cipher_suites = mwifiex_cipher_suites; + wdev->wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites); + + /* Initialize parameters for 2GHz band */ + + mwifiex_setup_ht_caps(&wdev->wiphy->bands[IEEE80211_BAND_2GHZ]->ht_cap, + priv); + mwifiex_setup_ht_caps(&wdev->wiphy->bands[IEEE80211_BAND_5GHZ]->ht_cap, + priv); + + memcpy(wdev->wiphy->perm_addr, mac, 6); + wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + + /* We are using custom domains */ + wdev->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY; + + wdev->wiphy->reg_notifier = mwifiex_reg_notifier; + + /* Set struct mwifiex_private pointer in wiphy_priv */ + wdev_priv = wiphy_priv(wdev->wiphy); + + *(unsigned long *) wdev_priv = (unsigned long) priv; + + ret = wiphy_register(wdev->wiphy); + if (ret < 0) { + dev_err(priv->adapter->dev, "%s: registering cfg80211 device\n", + __func__); + wiphy_free(wdev->wiphy); + return ret; + } else { + dev_dbg(priv->adapter->dev, + "info: successfully registered wiphy device\n"); + } + + dev_net_set(dev, wiphy_net(wdev->wiphy)); + dev->ieee80211_ptr = wdev; + memcpy(dev->dev_addr, wdev->wiphy->perm_addr, 6); + memcpy(dev->perm_addr, wdev->wiphy->perm_addr, 6); + SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy)); + priv->wdev = wdev; + + dev->flags |= IFF_BROADCAST | IFF_MULTICAST; + dev->watchdog_timeo = MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT; + dev->hard_header_len += MWIFIEX_MIN_DATA_HEADER_LEN; + + return ret; +} + +/* + * This function handles the result of different pending network operations. + * + * The following operations are handled and CFG802.11 subsystem is + * notified accordingly - + * - Scan request completion + * - Association request completion + * - IBSS join request completion + * - Disconnect request completion + */ +void +mwifiex_cfg80211_results(struct work_struct *work) +{ + struct mwifiex_private *priv = + container_of(work, struct mwifiex_private, cfg_workqueue); + struct mwifiex_user_scan_cfg *scan_req; + int ret = 0, i; + struct ieee80211_channel *chan; + + if (priv->scan_request) { + scan_req = kzalloc(sizeof(struct mwifiex_user_scan_cfg), + GFP_KERNEL); + if (!scan_req) { + dev_err(priv->adapter->dev, "failed to alloc " + "scan_req\n"); + return; + } + for (i = 0; i < priv->scan_request->n_ssids; i++) { + memcpy(scan_req->ssid_list[i].ssid, + priv->scan_request->ssids[i].ssid, + priv->scan_request->ssids[i].ssid_len); + scan_req->ssid_list[i].max_len = + priv->scan_request->ssids[i].ssid_len; + } + for (i = 0; i < priv->scan_request->n_channels; i++) { + chan = priv->scan_request->channels[i]; + scan_req->chan_list[i].chan_number = chan->hw_value; + scan_req->chan_list[i].radio_type = chan->band; + if (chan->flags & IEEE80211_CHAN_DISABLED) + scan_req->chan_list[i].scan_type = + MWIFIEX_SCAN_TYPE_PASSIVE; + else + scan_req->chan_list[i].scan_type = + MWIFIEX_SCAN_TYPE_ACTIVE; + scan_req->chan_list[i].scan_time = 0; + } + if (mwifiex_set_user_scan_ioctl(priv, scan_req)) { + ret = -EFAULT; + goto done; + } + if (mwifiex_inform_bss_from_scan_result(priv, NULL)) + ret = -EFAULT; +done: + priv->scan_result_status = ret; + dev_dbg(priv->adapter->dev, "info: %s: sending scan results\n", + __func__); + cfg80211_scan_done(priv->scan_request, + (priv->scan_result_status < 0)); + priv->scan_request = NULL; + kfree(scan_req); + } + + if (priv->assoc_request) { + if (!priv->assoc_result) { + cfg80211_connect_result(priv->netdev, priv->cfg_bssid, + NULL, 0, NULL, 0, + WLAN_STATUS_SUCCESS, + GFP_KERNEL); + dev_dbg(priv->adapter->dev, + "info: associated to bssid %pM successfully\n", + priv->cfg_bssid); + } else { + dev_dbg(priv->adapter->dev, + "info: association to bssid %pM failed\n", + priv->cfg_bssid); + memset(priv->cfg_bssid, 0, ETH_ALEN); + } + priv->assoc_request = 0; + priv->assoc_result = 0; + } + + if (priv->ibss_join_request) { + if (!priv->ibss_join_result) { + cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, + GFP_KERNEL); + dev_dbg(priv->adapter->dev, + "info: joined/created adhoc network with bssid" + " %pM successfully\n", priv->cfg_bssid); + } else { + dev_dbg(priv->adapter->dev, + "info: failed creating/joining adhoc network\n"); + } + priv->ibss_join_request = 0; + priv->ibss_join_result = 0; + } + + if (priv->disconnect) { + memset(priv->cfg_bssid, 0, ETH_ALEN); + priv->disconnect = 0; + } + + return; +} diff --git a/drivers/net/wireless/mwifiex/cfg80211.h b/drivers/net/wireless/mwifiex/cfg80211.h new file mode 100644 index 000000000000..c4db8f36aa16 --- /dev/null +++ b/drivers/net/wireless/mwifiex/cfg80211.h @@ -0,0 +1,31 @@ +/* + * Marvell Wireless LAN device driver: CFG80211 + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef __MWIFIEX_CFG80211__ +#define __MWIFIEX_CFG80211__ + +#include <net/cfg80211.h> + +#include "main.h" + +int mwifiex_register_cfg80211(struct net_device *, u8 *, + struct mwifiex_private *); + +void mwifiex_cfg80211_results(struct work_struct *work); +#endif diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c new file mode 100644 index 000000000000..07187a405fee --- /dev/null +++ b/drivers/net/wireless/mwifiex/cfp.c @@ -0,0 +1,367 @@ +/* + * Marvell Wireless LAN device driver: Channel, Frequence and Power + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "cfg80211.h" + +/* 100mW */ +#define MWIFIEX_TX_PWR_DEFAULT 20 +/* 100mW */ +#define MWIFIEX_TX_PWR_US_DEFAULT 20 +/* 50mW */ +#define MWIFIEX_TX_PWR_JP_DEFAULT 16 +/* 100mW */ +#define MWIFIEX_TX_PWR_FR_100MW 20 +/* 10mW */ +#define MWIFIEX_TX_PWR_FR_10MW 10 +/* 100mW */ +#define MWIFIEX_TX_PWR_EMEA_DEFAULT 20 + +static u8 adhoc_rates_b[B_SUPPORTED_RATES] = { 0x82, 0x84, 0x8b, 0x96, 0 }; + +static u8 adhoc_rates_g[G_SUPPORTED_RATES] = { 0x8c, 0x12, 0x98, 0x24, + 0xb0, 0x48, 0x60, 0x6c, 0 }; + +static u8 adhoc_rates_bg[BG_SUPPORTED_RATES] = { 0x82, 0x84, 0x8b, 0x96, + 0x0c, 0x12, 0x18, 0x24, + 0x30, 0x48, 0x60, 0x6c, 0 }; + +static u8 adhoc_rates_a[A_SUPPORTED_RATES] = { 0x8c, 0x12, 0x98, 0x24, + 0xb0, 0x48, 0x60, 0x6c, 0 }; +u8 supported_rates_a[A_SUPPORTED_RATES] = { 0x0c, 0x12, 0x18, 0x24, + 0xb0, 0x48, 0x60, 0x6c, 0 }; +static u16 mwifiex_data_rates[MWIFIEX_SUPPORTED_RATES_EXT] = { 0x02, 0x04, + 0x0B, 0x16, 0x00, 0x0C, 0x12, 0x18, + 0x24, 0x30, 0x48, 0x60, 0x6C, 0x90, + 0x0D, 0x1A, 0x27, 0x34, 0x4E, 0x68, + 0x75, 0x82, 0x0C, 0x1B, 0x36, 0x51, + 0x6C, 0xA2, 0xD8, 0xF3, 0x10E, 0x00 }; + +u8 supported_rates_b[B_SUPPORTED_RATES] = { 0x02, 0x04, 0x0b, 0x16, 0 }; + +u8 supported_rates_g[G_SUPPORTED_RATES] = { 0x0c, 0x12, 0x18, 0x24, + 0x30, 0x48, 0x60, 0x6c, 0 }; + +u8 supported_rates_bg[BG_SUPPORTED_RATES] = { 0x02, 0x04, 0x0b, 0x0c, + 0x12, 0x16, 0x18, 0x24, 0x30, 0x48, + 0x60, 0x6c, 0 }; + +u16 region_code_index[MWIFIEX_MAX_REGION_CODE] = { 0x10, 0x20, 0x30, + 0x32, 0x40, 0x41, 0xff }; + +u8 supported_rates_n[N_SUPPORTED_RATES] = { 0x02, 0x04, 0 }; + +/* + * This function maps an index in supported rates table into + * the corresponding data rate. + */ +u32 mwifiex_index_to_data_rate(struct mwifiex_adapter *adapter, u8 index, + u8 ht_info) +{ + u16 mcs_rate[4][8] = { + {0x1b, 0x36, 0x51, 0x6c, 0xa2, 0xd8, 0xf3, 0x10e} + , /* LG 40M */ + {0x1e, 0x3c, 0x5a, 0x78, 0xb4, 0xf0, 0x10e, 0x12c} + , /* SG 40M */ + {0x0d, 0x1a, 0x27, 0x34, 0x4e, 0x68, 0x75, 0x82} + , /* LG 20M */ + {0x0e, 0x1c, 0x2b, 0x39, 0x56, 0x73, 0x82, 0x90} + }; /* SG 20M */ + + u32 rate; + + if (ht_info & BIT(0)) { + if (index == MWIFIEX_RATE_BITMAP_MCS0) { + if (ht_info & BIT(2)) + rate = 0x0D; /* MCS 32 SGI rate */ + else + rate = 0x0C; /* MCS 32 LGI rate */ + } else if (index < 8) { + if (ht_info & BIT(1)) { + if (ht_info & BIT(2)) + /* SGI, 40M */ + rate = mcs_rate[1][index]; + else + /* LGI, 40M */ + rate = mcs_rate[0][index]; + } else { + if (ht_info & BIT(2)) + /* SGI, 20M */ + rate = mcs_rate[3][index]; + else + /* LGI, 20M */ + rate = mcs_rate[2][index]; + } + } else + rate = mwifiex_data_rates[0]; + } else { + if (index >= MWIFIEX_SUPPORTED_RATES_EXT) + index = 0; + rate = mwifiex_data_rates[index]; + } + return rate; +} + +/* + * This function maps a data rate value into corresponding index in supported + * rates table. + */ +u8 mwifiex_data_rate_to_index(struct mwifiex_adapter *adapter, u32 rate) +{ + u16 *ptr; + + if (rate) { + ptr = memchr(mwifiex_data_rates, rate, + sizeof(mwifiex_data_rates)); + if (ptr) + return (u8) (ptr - mwifiex_data_rates); + } + return 0; +} + +/* + * This function returns the current active data rates. + * + * The result may vary depending upon connection status. + */ +u32 mwifiex_get_active_data_rates(struct mwifiex_private *priv, u8 *rates) +{ + u32 k; + + if (!priv->media_connected) + k = mwifiex_get_supported_rates(priv, rates); + else + k = mwifiex_copy_rates(rates, 0, + priv->curr_bss_params.data_rates, + priv->curr_bss_params.num_of_rates); + + return k; +} + +/* + * This function locates the Channel-Frequency-Power triplet based upon + * band and channel parameters. + */ +struct mwifiex_chan_freq_power * +mwifiex_get_cfp_by_band_and_channel_from_cfg80211(struct mwifiex_private + *priv, u8 band, u16 channel) +{ + struct mwifiex_chan_freq_power *cfp = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *ch; + int i; + + if (mwifiex_band_to_radio_type(band) == HostCmd_SCAN_RADIO_TYPE_BG) + sband = priv->wdev->wiphy->bands[IEEE80211_BAND_2GHZ]; + else + sband = priv->wdev->wiphy->bands[IEEE80211_BAND_5GHZ]; + + if (!sband) { + dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d" + " & channel %d\n", __func__, band, channel); + return cfp; + } + + for (i = 0; i < sband->n_channels; i++) { + ch = &sband->channels[i]; + if (((ch->hw_value == channel) || + (channel == FIRST_VALID_CHANNEL)) + && !(ch->flags & IEEE80211_CHAN_DISABLED)) { + priv->cfp.channel = channel; + priv->cfp.freq = ch->center_freq; + priv->cfp.max_tx_power = ch->max_power; + cfp = &priv->cfp; + break; + } + } + if (i == sband->n_channels) + dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d" + " & channel %d\n", __func__, band, channel); + + return cfp; +} + +/* + * This function locates the Channel-Frequency-Power triplet based upon + * band and frequency parameters. + */ +struct mwifiex_chan_freq_power * +mwifiex_get_cfp_by_band_and_freq_from_cfg80211(struct mwifiex_private *priv, + u8 band, u32 freq) +{ + struct mwifiex_chan_freq_power *cfp = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *ch; + int i; + + if (mwifiex_band_to_radio_type(band) == HostCmd_SCAN_RADIO_TYPE_BG) + sband = priv->wdev->wiphy->bands[IEEE80211_BAND_2GHZ]; + else + sband = priv->wdev->wiphy->bands[IEEE80211_BAND_5GHZ]; + + if (!sband) { + dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d" + " & freq %d\n", __func__, band, freq); + return cfp; + } + + for (i = 0; i < sband->n_channels; i++) { + ch = &sband->channels[i]; + if ((ch->center_freq == freq) && + !(ch->flags & IEEE80211_CHAN_DISABLED)) { + priv->cfp.channel = ch->hw_value; + priv->cfp.freq = freq; + priv->cfp.max_tx_power = ch->max_power; + cfp = &priv->cfp; + break; + } + } + if (i == sband->n_channels) + dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d" + " & freq %d\n", __func__, band, freq); + + return cfp; +} + +/* + * This function checks if the data rate is set to auto. + */ +u8 +mwifiex_is_rate_auto(struct mwifiex_private *priv) +{ + u32 i; + int rate_num = 0; + + for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates); i++) + if (priv->bitmap_rates[i]) + rate_num++; + + if (rate_num > 1) + return true; + else + return false; +} + +/* + * This function converts rate bitmap into rate index. + */ +int +mwifiex_get_rate_index(struct mwifiex_adapter *adapter, u16 *rate_bitmap, + int size) +{ + int i; + + for (i = 0; i < size * 8; i++) + if (rate_bitmap[i / 16] & (1 << (i % 16))) + return i; + + return 0; +} + +/* + * This function gets the supported data rates. + * + * The function works in both Ad-Hoc and infra mode by printing the + * band and returning the data rates. + */ +u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates) +{ + u32 k = 0; + struct mwifiex_adapter *adapter = priv->adapter; + if (priv->bss_mode == NL80211_IFTYPE_STATION) { + switch (adapter->config_bands) { + case BAND_B: + dev_dbg(adapter->dev, "info: infra band=%d " + "supported_rates_b\n", adapter->config_bands); + k = mwifiex_copy_rates(rates, k, supported_rates_b, + sizeof(supported_rates_b)); + break; + case BAND_G: + case BAND_G | BAND_GN: + dev_dbg(adapter->dev, "info: infra band=%d " + "supported_rates_g\n", adapter->config_bands); + k = mwifiex_copy_rates(rates, k, supported_rates_g, + sizeof(supported_rates_g)); + break; + case BAND_B | BAND_G: + case BAND_A | BAND_B | BAND_G: + case BAND_A | BAND_B: + case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN: + case BAND_B | BAND_G | BAND_GN: + dev_dbg(adapter->dev, "info: infra band=%d " + "supported_rates_bg\n", adapter->config_bands); + k = mwifiex_copy_rates(rates, k, supported_rates_bg, + sizeof(supported_rates_bg)); + break; + case BAND_A: + case BAND_A | BAND_G: + dev_dbg(adapter->dev, "info: infra band=%d " + "supported_rates_a\n", adapter->config_bands); + k = mwifiex_copy_rates(rates, k, supported_rates_a, + sizeof(supported_rates_a)); + break; + case BAND_A | BAND_AN: + case BAND_A | BAND_G | BAND_AN | BAND_GN: + dev_dbg(adapter->dev, "info: infra band=%d " + "supported_rates_a\n", adapter->config_bands); + k = mwifiex_copy_rates(rates, k, supported_rates_a, + sizeof(supported_rates_a)); + break; + case BAND_GN: + dev_dbg(adapter->dev, "info: infra band=%d " + "supported_rates_n\n", adapter->config_bands); + k = mwifiex_copy_rates(rates, k, supported_rates_n, + sizeof(supported_rates_n)); + break; + } + } else { + /* Ad-hoc mode */ + switch (adapter->adhoc_start_band) { + case BAND_B: + dev_dbg(adapter->dev, "info: adhoc B\n"); + k = mwifiex_copy_rates(rates, k, adhoc_rates_b, + sizeof(adhoc_rates_b)); + break; + case BAND_G: + case BAND_G | BAND_GN: + dev_dbg(adapter->dev, "info: adhoc G only\n"); + k = mwifiex_copy_rates(rates, k, adhoc_rates_g, + sizeof(adhoc_rates_g)); + break; + case BAND_B | BAND_G: + case BAND_B | BAND_G | BAND_GN: + dev_dbg(adapter->dev, "info: adhoc BG\n"); + k = mwifiex_copy_rates(rates, k, adhoc_rates_bg, + sizeof(adhoc_rates_bg)); + break; + case BAND_A: + case BAND_A | BAND_AN: + dev_dbg(adapter->dev, "info: adhoc A\n"); + k = mwifiex_copy_rates(rates, k, adhoc_rates_a, + sizeof(adhoc_rates_a)); + break; + } + } + + return k; +} diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c new file mode 100644 index 000000000000..a9aeb31af455 --- /dev/null +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -0,0 +1,1459 @@ +/* + * Marvell Wireless LAN device driver: commands and events + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +/* + * This function initializes a command node. + * + * The actual allocation of the node is not done by this function. It only + * initiates a node by filling it with default parameters. Similarly, + * allocation of the different buffers used (IOCTL buffer, data buffer) are + * not done by this function either. + */ +static void +mwifiex_init_cmd_node(struct mwifiex_private *priv, + struct cmd_ctrl_node *cmd_node, + u32 cmd_oid, void *wait_queue, void *data_buf) +{ + cmd_node->priv = priv; + cmd_node->cmd_oid = cmd_oid; + cmd_node->wq_buf = wait_queue; + cmd_node->data_buf = data_buf; + cmd_node->cmd_skb = cmd_node->skb; +} + +/* + * This function returns a command node from the free queue depending upon + * availability. + */ +static struct cmd_ctrl_node * +mwifiex_get_cmd_node(struct mwifiex_adapter *adapter) +{ + struct cmd_ctrl_node *cmd_node; + unsigned long flags; + + spin_lock_irqsave(&adapter->cmd_free_q_lock, flags); + if (list_empty(&adapter->cmd_free_q)) { + dev_err(adapter->dev, "GET_CMD_NODE: cmd node not available\n"); + spin_unlock_irqrestore(&adapter->cmd_free_q_lock, flags); + return NULL; + } + cmd_node = list_first_entry(&adapter->cmd_free_q, + struct cmd_ctrl_node, list); + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->cmd_free_q_lock, flags); + + return cmd_node; +} + +/* + * This function cleans up a command node. + * + * The function resets the fields including the buffer pointers. + * This function does not try to free the buffers. They must be + * freed before calling this function. + * + * This function will however call the receive completion callback + * in case a response buffer is still available before resetting + * the pointer. + */ +static void +mwifiex_clean_cmd_node(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_node) +{ + cmd_node->cmd_oid = 0; + cmd_node->cmd_flag = 0; + cmd_node->wq_buf = NULL; + cmd_node->data_buf = NULL; + + if (cmd_node->resp_skb) { + mwifiex_recv_complete(adapter, cmd_node->resp_skb, 0); + cmd_node->resp_skb = NULL; + } + + return; +} + +/* + * This function returns a command node from the pending queue which + * matches the given IOCTL request. + */ +static struct cmd_ctrl_node * +mwifiex_get_pending_ioctl_cmd(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait_queue) +{ + unsigned long flags; + struct cmd_ctrl_node *cmd_node; + + spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); + list_for_each_entry(cmd_node, &adapter->cmd_pending_q, list) { + if (cmd_node->wq_buf == wait_queue) { + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, + flags); + return cmd_node; + } + } + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); + + return NULL; +} + +/* + * This function sends a host command to the firmware. + * + * The function copies the host command into the driver command + * buffer, which will be transferred to the firmware later by the + * main thread. + */ +static int mwifiex_cmd_host_cmd(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + struct mwifiex_ds_misc_cmd *pcmd_ptr = + (struct mwifiex_ds_misc_cmd *) data_buf; + + /* Copy the HOST command to command buffer */ + memcpy((void *) cmd, pcmd_ptr->cmd, pcmd_ptr->len); + dev_dbg(priv->adapter->dev, "cmd: host cmd size = %d\n", pcmd_ptr->len); + return 0; +} + +/* + * This function downloads a command to the firmware. + * + * The function performs sanity tests, sets the command sequence + * number and size, converts the header fields to CPU format before + * sending. Afterwards, it logs the command ID and action for debugging + * and sets up the command timeout timer. + */ +static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv, + struct cmd_ctrl_node *cmd_node) +{ + + struct mwifiex_adapter *adapter = priv->adapter; + int ret = 0; + struct host_cmd_ds_command *host_cmd; + struct mwifiex_wait_queue *wait_queue = NULL; + uint16_t cmd_code; + uint16_t cmd_size; + struct timeval tstamp; + unsigned long flags; + + if (!adapter || !cmd_node) + return -1; + + host_cmd = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data); + if (cmd_node->wq_buf) + wait_queue = (struct mwifiex_wait_queue *) cmd_node->wq_buf; + + /* Sanity test */ + if (host_cmd == NULL || host_cmd->size == 0) { + dev_err(adapter->dev, "DNLD_CMD: host_cmd is null" + " or cmd size is 0, not sending\n"); + if (wait_queue) + wait_queue->status = MWIFIEX_ERROR_CMD_DNLD_FAIL; + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + return -1; + } + + /* Set command sequence number */ + adapter->seq_num++; + host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO + (adapter->seq_num, cmd_node->priv->bss_num, + cmd_node->priv->bss_type)); + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd = cmd_node; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + + cmd_code = le16_to_cpu(host_cmd->command); + cmd_size = le16_to_cpu(host_cmd->size); + + skb_trim(cmd_node->cmd_skb, cmd_size); + + do_gettimeofday(&tstamp); + dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d," + " seqno %#x\n", + tstamp.tv_sec, tstamp.tv_usec, cmd_code, + le16_to_cpu(*(__le16 *) ((u8 *) host_cmd + S_DS_GEN)), cmd_size, + le16_to_cpu(host_cmd->seq_num)); + + skb_push(cmd_node->cmd_skb, INTF_HEADER_LEN); + + ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_CMD, + cmd_node->cmd_skb->data, + cmd_node->cmd_skb->len, NULL); + + if (ret == -1) { + dev_err(adapter->dev, "DNLD_CMD: host to card failed\n"); + if (wait_queue) + wait_queue->status = MWIFIEX_ERROR_CMD_DNLD_FAIL; + mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd); + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd = NULL; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + + adapter->dbg.num_cmd_host_to_card_failure++; + return -1; + } + + /* Save the last command id and action to debug log */ + adapter->dbg.last_cmd_index = + (adapter->dbg.last_cmd_index + 1) % DBG_CMD_NUM; + adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index] = cmd_code; + adapter->dbg.last_cmd_act[adapter->dbg.last_cmd_index] = + le16_to_cpu(*(__le16 *) ((u8 *) host_cmd + S_DS_GEN)); + + /* Clear BSS_NO_BITS from HostCmd */ + cmd_code &= HostCmd_CMD_ID_MASK; + + /* Setup the timer after transmit command */ + mod_timer(&adapter->cmd_timer, + jiffies + (MWIFIEX_TIMER_10S * HZ) / 1000); + + return 0; +} + +/* + * This function downloads a sleep confirm command to the firmware. + * + * The function performs sanity tests, sets the command sequence + * number and size, converts the header fields to CPU format before + * sending. + * + * No responses are needed for sleep confirm command. + */ +static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter) +{ + int ret = 0; + u16 cmd_len = 0; + struct mwifiex_private *priv; + struct mwifiex_opt_sleep_confirm_buffer *sleep_cfm_buf = + (struct mwifiex_opt_sleep_confirm_buffer *) + adapter->sleep_cfm->data; + cmd_len = sizeof(struct mwifiex_opt_sleep_confirm); + priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + + sleep_cfm_buf->ps_cfm_sleep.seq_num = + cpu_to_le16((HostCmd_SET_SEQ_NO_BSS_INFO + (adapter->seq_num, priv->bss_num, + priv->bss_type))); + adapter->seq_num++; + + ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_CMD, + adapter->sleep_cfm->data, + adapter->sleep_cfm->len + + INTF_HEADER_LEN, NULL); + + if (ret == -1) { + dev_err(adapter->dev, "SLEEP_CFM: failed\n"); + adapter->dbg.num_cmd_sleep_cfm_host_to_card_failure++; + return -1; + } + if (GET_BSS_ROLE(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY)) + == MWIFIEX_BSS_ROLE_STA) { + if (!sleep_cfm_buf->ps_cfm_sleep.resp_ctrl) + /* Response is not needed for sleep + confirm command */ + adapter->ps_state = PS_STATE_SLEEP; + else + adapter->ps_state = PS_STATE_SLEEP_CFM; + + if (!sleep_cfm_buf->ps_cfm_sleep.resp_ctrl + && (adapter->is_hs_configured + && !adapter->sleep_period.period)) { + adapter->pm_wakeup_card_req = true; + mwifiex_hs_activated_event(mwifiex_get_priv(adapter, + MWIFIEX_BSS_ROLE_STA), true); + } + } + + return ret; +} + +/* + * This function allocates the command buffers and links them to + * the command free queue. + * + * The driver uses a pre allocated number of command buffers, which + * are created at driver initializations and freed at driver cleanup. + * Every command needs to obtain a command buffer from this pool before + * it can be issued. The command free queue lists the command buffers + * currently free to use, while the command pending queue lists the + * command buffers already in use and awaiting handling. Command buffers + * are returned to the free queue after use. + */ +int mwifiex_alloc_cmd_buffer(struct mwifiex_adapter *adapter) +{ + struct cmd_ctrl_node *cmd_array; + u32 buf_size; + u32 i; + + /* Allocate and initialize struct cmd_ctrl_node */ + buf_size = sizeof(struct cmd_ctrl_node) * MWIFIEX_NUM_OF_CMD_BUFFER; + cmd_array = kzalloc(buf_size, GFP_KERNEL); + if (!cmd_array) { + dev_err(adapter->dev, "%s: failed to alloc cmd_array\n", + __func__); + return -1; + } + + adapter->cmd_pool = cmd_array; + memset(adapter->cmd_pool, 0, buf_size); + + /* Allocate and initialize command buffers */ + for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++) { + cmd_array[i].skb = dev_alloc_skb(MWIFIEX_SIZE_OF_CMD_BUFFER); + if (!cmd_array[i].skb) { + dev_err(adapter->dev, "ALLOC_CMD_BUF: out of memory\n"); + return -1; + } + } + + for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++) + mwifiex_insert_cmd_to_free_q(adapter, &cmd_array[i]); + + return 0; +} + +/* + * This function frees the command buffers. + * + * The function calls the completion callback for all the command + * buffers that still have response buffers associated with them. + */ +int mwifiex_free_cmd_buffer(struct mwifiex_adapter *adapter) +{ + struct cmd_ctrl_node *cmd_array; + u32 i; + + /* Need to check if cmd pool is allocated or not */ + if (!adapter->cmd_pool) { + dev_dbg(adapter->dev, "info: FREE_CMD_BUF: cmd_pool is null\n"); + return 0; + } + + cmd_array = adapter->cmd_pool; + + /* Release shared memory buffers */ + for (i = 0; i < MWIFIEX_NUM_OF_CMD_BUFFER; i++) { + if (cmd_array[i].skb) { + dev_dbg(adapter->dev, "cmd: free cmd buffer %d\n", i); + dev_kfree_skb_any(cmd_array[i].skb); + } + if (!cmd_array[i].resp_skb) + continue; + mwifiex_recv_complete(adapter, cmd_array[i].resp_skb, 0); + } + /* Release struct cmd_ctrl_node */ + if (adapter->cmd_pool) { + dev_dbg(adapter->dev, "cmd: free cmd pool\n"); + kfree(adapter->cmd_pool); + adapter->cmd_pool = NULL; + } + + return 0; +} + +/* + * This function handles events generated by firmware. + * + * Event body of events received from firmware are not used (though they are + * saved), only the event ID is used. Some events are re-invoked by + * the driver, with a new event body. + * + * After processing, the function calls the completion callback + * for cleanup. + */ +int mwifiex_process_event(struct mwifiex_adapter *adapter) +{ + int ret = 0; + struct mwifiex_private *priv = + mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + struct sk_buff *skb = adapter->event_skb; + u32 eventcause = adapter->event_cause; + struct timeval tstamp; + struct mwifiex_rxinfo *rx_info = NULL; + + /* Save the last event to debug log */ + adapter->dbg.last_event_index = + (adapter->dbg.last_event_index + 1) % DBG_CMD_NUM; + adapter->dbg.last_event[adapter->dbg.last_event_index] = + (u16) eventcause; + + /* Get BSS number and corresponding priv */ + priv = mwifiex_get_priv_by_id(adapter, EVENT_GET_BSS_NUM(eventcause), + EVENT_GET_BSS_TYPE(eventcause)); + if (!priv) + priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + /* Clear BSS_NO_BITS from event */ + eventcause &= EVENT_ID_MASK; + adapter->event_cause = eventcause; + + if (skb) { + rx_info = MWIFIEX_SKB_RXCB(skb); + rx_info->bss_index = priv->bss_index; + } + + if (eventcause != EVENT_PS_SLEEP && eventcause != EVENT_PS_AWAKE) { + do_gettimeofday(&tstamp); + dev_dbg(adapter->dev, "event: %lu.%lu: cause: %#x\n", + tstamp.tv_sec, tstamp.tv_usec, eventcause); + } + + ret = mwifiex_process_sta_event(priv); + + adapter->event_cause = 0; + adapter->event_skb = NULL; + + mwifiex_recv_complete(adapter, skb, 0); + + return ret; +} + +/* + * This function prepares a command before sending it to the firmware. + * + * Preparation includes - + * - Sanity tests to make sure the card is still present or the FW + * is not reset + * - Getting a new command node from the command free queue + * - Initializing the command node for default parameters + * - Fill up the non-default parameters and buffer pointers + * - Add the command to pending queue + */ +int mwifiex_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no, + u16 cmd_action, u32 cmd_oid, + void *wait_queue, void *data_buf) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct cmd_ctrl_node *cmd_node = NULL; + struct host_cmd_ds_command *cmd_ptr = NULL; + + if (!adapter) { + pr_err("PREP_CMD: adapter is NULL\n"); + return -1; + } + + if (adapter->is_suspended) { + dev_err(adapter->dev, "PREP_CMD: device in suspended state\n"); + return -1; + } + + if (adapter->surprise_removed) { + dev_err(adapter->dev, "PREP_CMD: card is removed\n"); + return -1; + } + + if (adapter->hw_status == MWIFIEX_HW_STATUS_RESET) { + if (cmd_no != HostCmd_CMD_FUNC_INIT) { + dev_err(adapter->dev, "PREP_CMD: FW in reset state\n"); + return -1; + } + } + + /* Get a new command node */ + cmd_node = mwifiex_get_cmd_node(adapter); + + if (!cmd_node) { + dev_err(adapter->dev, "PREP_CMD: no free cmd node\n"); + return -1; + } + + /* Initialize the command node */ + mwifiex_init_cmd_node(priv, cmd_node, cmd_oid, wait_queue, data_buf); + + if (!cmd_node->cmd_skb) { + dev_err(adapter->dev, "PREP_CMD: no free cmd buf\n"); + return -1; + } + + memset(skb_put(cmd_node->cmd_skb, sizeof(struct host_cmd_ds_command)), + 0, sizeof(struct host_cmd_ds_command)); + + cmd_ptr = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data); + cmd_ptr->command = cpu_to_le16(cmd_no); + cmd_ptr->result = 0; + + /* Prepare command */ + if (cmd_no) { + ret = mwifiex_sta_prepare_cmd(priv, cmd_no, cmd_action, + cmd_oid, data_buf, cmd_ptr); + } else { + ret = mwifiex_cmd_host_cmd(priv, cmd_ptr, data_buf); + cmd_node->cmd_flag |= CMD_F_HOSTCMD; + } + + /* Return error, since the command preparation failed */ + if (ret) { + dev_err(adapter->dev, "PREP_CMD: cmd %#x preparation failed\n", + cmd_no); + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + return -1; + } + + /* Send command */ + if (cmd_no == HostCmd_CMD_802_11_SCAN) + mwifiex_queue_scan_cmd(priv, cmd_node); + else + mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true); + + return ret; +} + +/* + * This function returns a command to the command free queue. + * + * The function also calls the completion callback if required, before + * cleaning the command node and re-inserting it into the free queue. + */ +void +mwifiex_insert_cmd_to_free_q(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_node) +{ + struct mwifiex_wait_queue *wait_queue = NULL; + unsigned long flags; + + if (cmd_node == NULL) + return; + if (cmd_node->wq_buf) { + wait_queue = (struct mwifiex_wait_queue *) cmd_node->wq_buf; + if (wait_queue->status != MWIFIEX_ERROR_NO_ERROR) + mwifiex_ioctl_complete(adapter, wait_queue, -1); + else + mwifiex_ioctl_complete(adapter, wait_queue, 0); + } + /* Clean the node */ + mwifiex_clean_cmd_node(adapter, cmd_node); + + /* Insert node into cmd_free_q */ + spin_lock_irqsave(&adapter->cmd_free_q_lock, flags); + list_add_tail(&cmd_node->list, &adapter->cmd_free_q); + spin_unlock_irqrestore(&adapter->cmd_free_q_lock, flags); + + return; +} + +/* + * This function queues a command to the command pending queue. + * + * This in effect adds the command to the command list to be executed. + * Exit PS command is handled specially, by placing it always to the + * front of the command queue. + */ +void +mwifiex_insert_cmd_to_pending_q(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_node, u32 add_tail) +{ + struct host_cmd_ds_command *host_cmd = NULL; + u16 command; + unsigned long flags; + + host_cmd = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data); + if (!host_cmd) { + dev_err(adapter->dev, "QUEUE_CMD: host_cmd is NULL\n"); + return; + } + + command = le16_to_cpu(host_cmd->command); + + /* Exit_PS command needs to be queued in the header always. */ + if (command == HostCmd_CMD_802_11_PS_MODE_ENH) { + struct host_cmd_ds_802_11_ps_mode_enh *pm = + &host_cmd->params.psmode_enh; + if ((le16_to_cpu(pm->action) == DIS_PS) + || (le16_to_cpu(pm->action) == DIS_AUTO_PS)) { + if (adapter->ps_state != PS_STATE_AWAKE) + add_tail = false; + } + } + + spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); + if (add_tail) + list_add_tail(&cmd_node->list, &adapter->cmd_pending_q); + else + list_add(&cmd_node->list, &adapter->cmd_pending_q); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); + + dev_dbg(adapter->dev, "cmd: QUEUE_CMD: cmd=%#x is queued\n", command); + + return; +} + +/* + * This function executes the next command in command pending queue. + * + * This function will fail if a command is already in processing stage, + * otherwise it will dequeue the first command from the command pending + * queue and send to the firmware. + * + * If the device is currently in host sleep mode, any commands, except the + * host sleep configuration command will de-activate the host sleep. For PS + * mode, the function will put the firmware back to sleep if applicable. + */ +int mwifiex_exec_next_cmd(struct mwifiex_adapter *adapter) +{ + struct mwifiex_private *priv = NULL; + struct cmd_ctrl_node *cmd_node = NULL; + int ret = 0; + struct host_cmd_ds_command *host_cmd; + unsigned long cmd_flags; + unsigned long cmd_pending_q_flags; + + /* Check if already in processing */ + if (adapter->curr_cmd) { + dev_err(adapter->dev, "EXEC_NEXT_CMD: cmd in processing\n"); + return -1; + } + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags); + /* Check if any command is pending */ + spin_lock_irqsave(&adapter->cmd_pending_q_lock, cmd_pending_q_flags); + if (list_empty(&adapter->cmd_pending_q)) { + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, + cmd_pending_q_flags); + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); + return 0; + } + cmd_node = list_first_entry(&adapter->cmd_pending_q, + struct cmd_ctrl_node, list); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, + cmd_pending_q_flags); + + host_cmd = (struct host_cmd_ds_command *) (cmd_node->cmd_skb->data); + priv = cmd_node->priv; + + if (adapter->ps_state != PS_STATE_AWAKE) { + dev_err(adapter->dev, "%s: cannot send cmd in sleep state," + " this should not happen\n", __func__); + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); + return ret; + } + + spin_lock_irqsave(&adapter->cmd_pending_q_lock, cmd_pending_q_flags); + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, + cmd_pending_q_flags); + + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); + ret = mwifiex_dnld_cmd_to_fw(priv, cmd_node); + priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + /* Any command sent to the firmware when host is in sleep + * mode should de-configure host sleep. We should skip the + * host sleep configuration command itself though + */ + if (priv && (host_cmd->command != + cpu_to_le16(HostCmd_CMD_802_11_HS_CFG_ENH))) { + if (adapter->hs_activated) { + adapter->is_hs_configured = false; + mwifiex_hs_activated_event(priv, false); + } + } + + return ret; +} + +/* + * This function handles the command response. + * + * After processing, the function cleans the command node and puts + * it back to the command free queue. + */ +int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter) +{ + struct host_cmd_ds_command *resp = NULL; + struct mwifiex_private *priv = + mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + int ret = 0; + uint16_t orig_cmdresp_no; + uint16_t cmdresp_no; + uint16_t cmdresp_result; + struct mwifiex_wait_queue *wait_queue = NULL; + struct timeval tstamp; + unsigned long flags; + + /* Now we got response from FW, cancel the command timer */ + del_timer(&adapter->cmd_timer); + + if (!adapter->curr_cmd || !adapter->curr_cmd->resp_skb) { + resp = (struct host_cmd_ds_command *) adapter->upld_buf; + dev_err(adapter->dev, "CMD_RESP: NULL curr_cmd, %#x\n", + le16_to_cpu(resp->command)); + return -1; + } + + if (adapter->curr_cmd->wq_buf) + wait_queue = (struct mwifiex_wait_queue *) + adapter->curr_cmd->wq_buf; + + adapter->num_cmd_timeout = 0; + + resp = (struct host_cmd_ds_command *) adapter->curr_cmd->resp_skb->data; + if (adapter->curr_cmd->cmd_flag & CMD_F_CANCELED) { + dev_err(adapter->dev, "CMD_RESP: %#x been canceled\n", + le16_to_cpu(resp->command)); + mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd); + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd = NULL; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + return -1; + } + + if (adapter->curr_cmd->cmd_flag & CMD_F_HOSTCMD) { + /* Copy original response back to response buffer */ + struct mwifiex_ds_misc_cmd *hostcmd = NULL; + uint16_t size = le16_to_cpu(resp->size); + dev_dbg(adapter->dev, "info: host cmd resp size = %d\n", size); + size = min_t(u16, size, MWIFIEX_SIZE_OF_CMD_BUFFER); + if (adapter->curr_cmd->data_buf) { + hostcmd = (struct mwifiex_ds_misc_cmd *) + adapter->curr_cmd->data_buf; + hostcmd->len = size; + memcpy(hostcmd->cmd, (void *) resp, size); + } + } + orig_cmdresp_no = le16_to_cpu(resp->command); + + /* Get BSS number and corresponding priv */ + priv = mwifiex_get_priv_by_id(adapter, + HostCmd_GET_BSS_NO(le16_to_cpu(resp->seq_num)), + HostCmd_GET_BSS_TYPE(le16_to_cpu(resp->seq_num))); + if (!priv) + priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + /* Clear RET_BIT from HostCmd */ + resp->command = cpu_to_le16(orig_cmdresp_no & HostCmd_CMD_ID_MASK); + + cmdresp_no = le16_to_cpu(resp->command); + cmdresp_result = le16_to_cpu(resp->result); + + /* Save the last command response to debug log */ + adapter->dbg.last_cmd_resp_index = + (adapter->dbg.last_cmd_resp_index + 1) % DBG_CMD_NUM; + adapter->dbg.last_cmd_resp_id[adapter->dbg.last_cmd_resp_index] = + orig_cmdresp_no; + + do_gettimeofday(&tstamp); + dev_dbg(adapter->dev, "cmd: CMD_RESP: (%lu.%lu): 0x%x, result %d," + " len %d, seqno 0x%x\n", + tstamp.tv_sec, tstamp.tv_usec, orig_cmdresp_no, cmdresp_result, + le16_to_cpu(resp->size), le16_to_cpu(resp->seq_num)); + + if (!(orig_cmdresp_no & HostCmd_RET_BIT)) { + dev_err(adapter->dev, "CMD_RESP: invalid cmd resp\n"); + if (wait_queue) + wait_queue->status = MWIFIEX_ERROR_FW_CMDRESP; + + mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd); + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd = NULL; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + return -1; + } + + if (adapter->curr_cmd->cmd_flag & CMD_F_HOSTCMD) { + adapter->curr_cmd->cmd_flag &= ~CMD_F_HOSTCMD; + if ((cmdresp_result == HostCmd_RESULT_OK) + && (cmdresp_no == HostCmd_CMD_802_11_HS_CFG_ENH)) + ret = mwifiex_ret_802_11_hs_cfg(priv, resp); + } else { + /* handle response */ + ret = mwifiex_process_sta_cmdresp(priv, cmdresp_no, resp, + wait_queue); + } + + /* Check init command response */ + if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) { + if (ret == -1) { + dev_err(adapter->dev, "%s: cmd %#x failed during " + "initialization\n", __func__, cmdresp_no); + mwifiex_init_fw_complete(adapter); + return -1; + } else if (adapter->last_init_cmd == cmdresp_no) + adapter->hw_status = MWIFIEX_HW_STATUS_INIT_DONE; + } + + if (adapter->curr_cmd) { + if (wait_queue && (!ret)) + wait_queue->status = MWIFIEX_ERROR_NO_ERROR; + else if (wait_queue && (ret == -1)) + wait_queue->status = MWIFIEX_ERROR_CMD_RESP_FAIL; + + /* Clean up and put current command back to cmd_free_q */ + mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd); + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd = NULL; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + } + + return ret; +} + +/* + * This function handles the timeout of command sending. + * + * It will re-send the same command again. + */ +void +mwifiex_cmd_timeout_func(unsigned long function_context) +{ + struct mwifiex_adapter *adapter = + (struct mwifiex_adapter *) function_context; + struct cmd_ctrl_node *cmd_node = NULL; + struct mwifiex_wait_queue *wait_queue = NULL; + struct timeval tstamp; + + adapter->num_cmd_timeout++; + adapter->dbg.num_cmd_timeout++; + if (!adapter->curr_cmd) { + dev_dbg(adapter->dev, "cmd: empty curr_cmd\n"); + return; + } + cmd_node = adapter->curr_cmd; + if (cmd_node->wq_buf) { + wait_queue = (struct mwifiex_wait_queue *) cmd_node->wq_buf; + wait_queue->status = MWIFIEX_ERROR_CMD_TIMEOUT; + } + + if (cmd_node) { + adapter->dbg.timeout_cmd_id = + adapter->dbg.last_cmd_id[adapter->dbg.last_cmd_index]; + adapter->dbg.timeout_cmd_act = + adapter->dbg.last_cmd_act[adapter->dbg.last_cmd_index]; + do_gettimeofday(&tstamp); + dev_err(adapter->dev, "%s: Timeout cmd id (%lu.%lu) = %#x," + " act = %#x\n", __func__, + tstamp.tv_sec, tstamp.tv_usec, + adapter->dbg.timeout_cmd_id, + adapter->dbg.timeout_cmd_act); + + dev_err(adapter->dev, "num_data_h2c_failure = %d\n", + adapter->dbg.num_tx_host_to_card_failure); + dev_err(adapter->dev, "num_cmd_h2c_failure = %d\n", + adapter->dbg.num_cmd_host_to_card_failure); + + dev_err(adapter->dev, "num_cmd_timeout = %d\n", + adapter->dbg.num_cmd_timeout); + dev_err(adapter->dev, "num_tx_timeout = %d\n", + adapter->dbg.num_tx_timeout); + + dev_err(adapter->dev, "last_cmd_index = %d\n", + adapter->dbg.last_cmd_index); + print_hex_dump_bytes("last_cmd_id: ", DUMP_PREFIX_OFFSET, + adapter->dbg.last_cmd_id, DBG_CMD_NUM); + print_hex_dump_bytes("last_cmd_act: ", DUMP_PREFIX_OFFSET, + adapter->dbg.last_cmd_act, DBG_CMD_NUM); + + dev_err(adapter->dev, "last_cmd_resp_index = %d\n", + adapter->dbg.last_cmd_resp_index); + print_hex_dump_bytes("last_cmd_resp_id: ", DUMP_PREFIX_OFFSET, + adapter->dbg.last_cmd_resp_id, DBG_CMD_NUM); + + dev_err(adapter->dev, "last_event_index = %d\n", + adapter->dbg.last_event_index); + print_hex_dump_bytes("last_event: ", DUMP_PREFIX_OFFSET, + adapter->dbg.last_event, DBG_CMD_NUM); + + dev_err(adapter->dev, "data_sent=%d cmd_sent=%d\n", + adapter->data_sent, adapter->cmd_sent); + + dev_err(adapter->dev, "ps_mode=%d ps_state=%d\n", + adapter->ps_mode, adapter->ps_state); + } + if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING) + mwifiex_init_fw_complete(adapter); + + return; +} + +/* + * This function cancels all the pending commands. + * + * The current command, all commands in command pending queue and all scan + * commands in scan pending queue are cancelled. All the completion callbacks + * are called with failure status to ensure cleanup. + */ +void +mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter) +{ + struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL; + struct mwifiex_wait_queue *wait_queue = NULL; + unsigned long flags; + + /* Cancel current cmd */ + if ((adapter->curr_cmd) && (adapter->curr_cmd->wq_buf)) { + wait_queue = + (struct mwifiex_wait_queue *) adapter->curr_cmd->wq_buf; + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd->wq_buf = NULL; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + wait_queue->status = MWIFIEX_ERROR_CMD_CANCEL; + mwifiex_ioctl_complete(adapter, wait_queue, -1); + } + /* Cancel all pending command */ + spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); + list_for_each_entry_safe(cmd_node, tmp_node, + &adapter->cmd_pending_q, list) { + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); + + if (cmd_node->wq_buf) { + wait_queue = + (struct mwifiex_wait_queue *) cmd_node->wq_buf; + wait_queue->status = MWIFIEX_ERROR_CMD_CANCEL; + mwifiex_ioctl_complete(adapter, wait_queue, -1); + cmd_node->wq_buf = NULL; + } + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); + } + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); + + /* Cancel all pending scan command */ + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + list_for_each_entry_safe(cmd_node, tmp_node, + &adapter->scan_pending_q, list) { + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); + + cmd_node->wq_buf = NULL; + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + } + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->scan_processing = false; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); +} + +/* + * This function cancels all pending commands that matches with + * the given IOCTL request. + * + * Both the current command buffer and the pending command queue are + * searched for matching IOCTL request. The completion callback of + * the matched command is called with failure status to ensure cleanup. + * In case of scan commands, all pending commands in scan pending queue + * are cancelled. + */ +void +mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait_queue) +{ + struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL; + unsigned long cmd_flags; + unsigned long cmd_pending_q_flags; + unsigned long scan_pending_q_flags; + uint16_t cancel_scan_cmd = false; + + if ((adapter->curr_cmd) && + (adapter->curr_cmd->wq_buf == wait_queue)) { + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags); + cmd_node = adapter->curr_cmd; + cmd_node->wq_buf = NULL; + cmd_node->cmd_flag |= CMD_F_CANCELED; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); + } + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags); + while (1) { + cmd_node = mwifiex_get_pending_ioctl_cmd(adapter, wait_queue); + if (!cmd_node) + break; + + spin_lock_irqsave(&adapter->cmd_pending_q_lock, + cmd_pending_q_flags); + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, + cmd_pending_q_flags); + + cmd_node->wq_buf = NULL; + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + } + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); + /* Cancel all pending scan command */ + spin_lock_irqsave(&adapter->scan_pending_q_lock, + scan_pending_q_flags); + list_for_each_entry_safe(cmd_node, tmp_node, + &adapter->scan_pending_q, list) { + if (cmd_node->wq_buf == wait_queue) { + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, + scan_pending_q_flags); + cmd_node->wq_buf = NULL; + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + spin_lock_irqsave(&adapter->scan_pending_q_lock, + scan_pending_q_flags); + cancel_scan_cmd = true; + } + } + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, + scan_pending_q_flags); + + if (cancel_scan_cmd) { + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, cmd_flags); + adapter->scan_processing = false; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, cmd_flags); + } + wait_queue->status = MWIFIEX_ERROR_CMD_CANCEL; + mwifiex_ioctl_complete(adapter, wait_queue, -1); + + return; +} + +/* + * This function sends the sleep confirm command to firmware, if + * possible. + * + * The sleep confirm command cannot be issued if command response, + * data response or event response is awaiting handling, or if we + * are in the middle of sending a command, or expecting a command + * response. + */ +void +mwifiex_check_ps_cond(struct mwifiex_adapter *adapter) +{ + if (!adapter->cmd_sent && + !adapter->curr_cmd && !IS_CARD_RX_RCVD(adapter)) + mwifiex_dnld_sleep_confirm_cmd(adapter); + else + dev_dbg(adapter->dev, + "cmd: Delay Sleep Confirm (%s%s%s)\n", + (adapter->cmd_sent) ? "D" : "", + (adapter->curr_cmd) ? "C" : "", + (IS_CARD_RX_RCVD(adapter)) ? "R" : ""); +} + +/* + * This function sends a Host Sleep activated event to applications. + * + * This event is generated by the driver, with a blank event body. + */ +void +mwifiex_hs_activated_event(struct mwifiex_private *priv, u8 activated) +{ + if (activated) { + if (priv->adapter->is_hs_configured) { + priv->adapter->hs_activated = true; + dev_dbg(priv->adapter->dev, "event: hs_activated\n"); + priv->adapter->hs_activate_wait_q_woken = true; + wake_up_interruptible( + &priv->adapter->hs_activate_wait_q); + } else { + dev_dbg(priv->adapter->dev, "event: HS not configured\n"); + } + } else { + dev_dbg(priv->adapter->dev, "event: hs_deactivated\n"); + priv->adapter->hs_activated = false; + } +} + +/* + * This function handles the command response of a Host Sleep configuration + * command. + * + * Handling includes changing the header fields into CPU format + * and setting the current host sleep activation status in driver. + * + * In case host sleep status change, the function generates an event to + * notify the applications. + */ +int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_hs_cfg_enh *phs_cfg = + &resp->params.opt_hs_cfg; + uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions); + + if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE)) { + mwifiex_hs_activated_event(priv, true); + return 0; + } else { + dev_dbg(adapter->dev, "cmd: CMD_RESP: HS_CFG cmd reply" + " result=%#x, conditions=0x%x gpio=0x%x gap=0x%x\n", + resp->result, conditions, + phs_cfg->params.hs_config.gpio, + phs_cfg->params.hs_config.gap); + } + if (conditions != HOST_SLEEP_CFG_CANCEL) { + adapter->is_hs_configured = true; + } else { + adapter->is_hs_configured = false; + if (adapter->hs_activated) + mwifiex_hs_activated_event(priv, false); + } + + return 0; +} + +/* + * This function wakes up the adapter and generates a Host Sleep + * cancel event on receiving the power up interrupt. + */ +void +mwifiex_process_hs_config(struct mwifiex_adapter *adapter) +{ + dev_dbg(adapter->dev, "info: %s: auto cancelling host sleep" + " since there is interrupt from the firmware\n", __func__); + + adapter->if_ops.wakeup(adapter); + adapter->hs_activated = false; + adapter->is_hs_configured = false; + mwifiex_hs_activated_event(mwifiex_get_priv(adapter, + MWIFIEX_BSS_ROLE_ANY), false); + return; +} + +/* + * This function handles the command response of a sleep confirm command. + * + * The function sets the card state to SLEEP if the response indicates success. + */ +void +mwifiex_process_sleep_confirm_resp(struct mwifiex_adapter *adapter, + u8 *pbuf, u32 upld_len) +{ + struct host_cmd_ds_command *cmd = (struct host_cmd_ds_command *) pbuf; + struct mwifiex_private *priv = + mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + uint16_t result = le16_to_cpu(cmd->result); + uint16_t command = le16_to_cpu(cmd->command); + uint16_t seq_num = le16_to_cpu(cmd->seq_num); + + if (!upld_len) { + dev_err(adapter->dev, "%s: cmd size is 0\n", __func__); + return; + } + + /* Get BSS number and corresponding priv */ + priv = mwifiex_get_priv_by_id(adapter, HostCmd_GET_BSS_NO(seq_num), + HostCmd_GET_BSS_TYPE(seq_num)); + if (!priv) + priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + + /* Update sequence number */ + seq_num = HostCmd_GET_SEQ_NO(seq_num); + /* Clear RET_BIT from HostCmd */ + command &= HostCmd_CMD_ID_MASK; + + if (command != HostCmd_CMD_802_11_PS_MODE_ENH) { + dev_err(adapter->dev, "%s: received unexpected response for" + " cmd %x, result = %x\n", __func__, command, result); + return; + } + + if (result) { + dev_err(adapter->dev, "%s: sleep confirm cmd failed\n", + __func__); + adapter->pm_wakeup_card_req = false; + adapter->ps_state = PS_STATE_AWAKE; + return; + } + adapter->pm_wakeup_card_req = true; + if (adapter->is_hs_configured) + mwifiex_hs_activated_event(mwifiex_get_priv(adapter, + MWIFIEX_BSS_ROLE_ANY), true); + adapter->ps_state = PS_STATE_SLEEP; + cmd->command = cpu_to_le16(command); + cmd->seq_num = cpu_to_le16(seq_num); +} +EXPORT_SYMBOL_GPL(mwifiex_process_sleep_confirm_resp); + +/* + * This function prepares an enhanced power mode command. + * + * This function can be used to disable power save or to configure + * power save with auto PS or STA PS or auto deep sleep. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting Power Save bitmap, PS parameters TLV, PS mode TLV, + * auto deep sleep TLV (as required) + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_enh_power_mode(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, uint16_t ps_bitmap, + void *data_buf) +{ + struct host_cmd_ds_802_11_ps_mode_enh *psmode_enh = + &cmd->params.psmode_enh; + u8 *tlv = NULL; + u16 cmd_size = 0; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH); + if (cmd_action == DIS_AUTO_PS) { + psmode_enh->action = cpu_to_le16(DIS_AUTO_PS); + psmode_enh->params.ps_bitmap = cpu_to_le16(ps_bitmap); + cmd->size = cpu_to_le16(S_DS_GEN + sizeof(psmode_enh->action) + + sizeof(psmode_enh->params.ps_bitmap)); + } else if (cmd_action == GET_PS) { + psmode_enh->action = cpu_to_le16(GET_PS); + psmode_enh->params.ps_bitmap = cpu_to_le16(ps_bitmap); + cmd->size = cpu_to_le16(S_DS_GEN + sizeof(psmode_enh->action) + + sizeof(psmode_enh->params.ps_bitmap)); + } else if (cmd_action == EN_AUTO_PS) { + psmode_enh->action = cpu_to_le16(EN_AUTO_PS); + psmode_enh->params.ps_bitmap = cpu_to_le16(ps_bitmap); + cmd_size = S_DS_GEN + sizeof(psmode_enh->action) + + sizeof(psmode_enh->params.ps_bitmap); + tlv = (u8 *) cmd + cmd_size; + if (ps_bitmap & BITMAP_STA_PS) { + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_ie_types_ps_param *ps_tlv = + (struct mwifiex_ie_types_ps_param *) tlv; + struct mwifiex_ps_param *ps_mode = &ps_tlv->param; + ps_tlv->header.type = cpu_to_le16(TLV_TYPE_PS_PARAM); + ps_tlv->header.len = cpu_to_le16(sizeof(*ps_tlv) - + sizeof(struct mwifiex_ie_types_header)); + cmd_size += sizeof(*ps_tlv); + tlv += sizeof(*ps_tlv); + dev_dbg(adapter->dev, "cmd: PS Command: Enter PS\n"); + ps_mode->null_pkt_interval = + cpu_to_le16(adapter->null_pkt_interval); + ps_mode->multiple_dtims = + cpu_to_le16(adapter->multiple_dtim); + ps_mode->bcn_miss_timeout = + cpu_to_le16(adapter->bcn_miss_time_out); + ps_mode->local_listen_interval = + cpu_to_le16(adapter->local_listen_interval); + ps_mode->adhoc_wake_period = + cpu_to_le16(adapter->adhoc_awake_period); + ps_mode->delay_to_ps = + cpu_to_le16(adapter->delay_to_ps); + ps_mode->mode = + cpu_to_le16(adapter->enhanced_ps_mode); + + } + if (ps_bitmap & BITMAP_AUTO_DS) { + struct mwifiex_ie_types_auto_ds_param *auto_ds_tlv = + (struct mwifiex_ie_types_auto_ds_param *) tlv; + u16 idletime = 0; + + auto_ds_tlv->header.type = + cpu_to_le16(TLV_TYPE_AUTO_DS_PARAM); + auto_ds_tlv->header.len = + cpu_to_le16(sizeof(*auto_ds_tlv) - + sizeof(struct mwifiex_ie_types_header)); + cmd_size += sizeof(*auto_ds_tlv); + tlv += sizeof(*auto_ds_tlv); + if (data_buf) + idletime = ((struct mwifiex_ds_auto_ds *) + data_buf)->idle_time; + dev_dbg(priv->adapter->dev, + "cmd: PS Command: Enter Auto Deep Sleep\n"); + auto_ds_tlv->deep_sleep_timeout = cpu_to_le16(idletime); + } + cmd->size = cpu_to_le16(cmd_size); + } + return 0; +} + +/* + * This function handles the command response of an enhanced power mode + * command. + * + * Handling includes changing the header fields into CPU format + * and setting the current enhanced power mode in driver. + */ +int mwifiex_ret_enh_power_mode(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_ps_mode_enh *ps_mode = + &resp->params.psmode_enh; + uint16_t action = le16_to_cpu(ps_mode->action); + uint16_t ps_bitmap = le16_to_cpu(ps_mode->params.ps_bitmap); + uint16_t auto_ps_bitmap = + le16_to_cpu(ps_mode->params.ps_bitmap); + + dev_dbg(adapter->dev, "info: %s: PS_MODE cmd reply result=%#x action=%#X\n", + __func__, resp->result, action); + if (action == EN_AUTO_PS) { + if (auto_ps_bitmap & BITMAP_AUTO_DS) { + dev_dbg(adapter->dev, "cmd: Enabled auto deep sleep\n"); + priv->adapter->is_deep_sleep = true; + } + if (auto_ps_bitmap & BITMAP_STA_PS) { + dev_dbg(adapter->dev, "cmd: Enabled STA power save\n"); + if (adapter->sleep_period.period) + dev_dbg(adapter->dev, "cmd: set to uapsd/pps mode\n"); + } + } else if (action == DIS_AUTO_PS) { + if (ps_bitmap & BITMAP_AUTO_DS) { + priv->adapter->is_deep_sleep = false; + dev_dbg(adapter->dev, "cmd: Disabled auto deep sleep\n"); + } + if (ps_bitmap & BITMAP_STA_PS) { + dev_dbg(adapter->dev, "cmd: Disabled STA power save\n"); + if (adapter->sleep_period.period) { + adapter->delay_null_pkt = false; + adapter->tx_lock_flag = false; + adapter->pps_uapsd_mode = false; + } + } + } else if (action == GET_PS) { + if (ps_bitmap & BITMAP_STA_PS) + adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP; + else + adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM; + + dev_dbg(adapter->dev, "cmd: ps_bitmap=%#x\n", ps_bitmap); + + if (data_buf) { + /* This section is for get power save mode */ + struct mwifiex_ds_pm_cfg *pm_cfg = + (struct mwifiex_ds_pm_cfg *)data_buf; + if (ps_bitmap & BITMAP_STA_PS) + pm_cfg->param.ps_mode = 1; + else + pm_cfg->param.ps_mode = 0; + } + } + return 0; +} + +/* + * This function prepares command to get hardware specifications. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting permanent address parameter + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_get_hw_spec(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd) +{ + struct host_cmd_ds_get_hw_spec *hw_spec = &cmd->params.hw_spec; + + cmd->command = cpu_to_le16(HostCmd_CMD_GET_HW_SPEC); + cmd->size = + cpu_to_le16(sizeof(struct host_cmd_ds_get_hw_spec) + S_DS_GEN); + memcpy(hw_spec->permanent_addr, priv->curr_addr, ETH_ALEN); + + return 0; +} + +/* + * This function handles the command response of get hardware + * specifications. + * + * Handling includes changing the header fields into CPU format + * and saving/updating the following parameters in driver - + * - Firmware capability information + * - Firmware band settings + * - Ad-hoc start band and channel + * - Ad-hoc 11n activation status + * - Firmware release number + * - Number of antennas + * - Hardware address + * - Hardware interface version + * - Firmware version + * - Region code + * - 11n capabilities + * - MCS support fields + * - MP end port + */ +int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct host_cmd_ds_get_hw_spec *hw_spec = &resp->params.hw_spec; + struct mwifiex_adapter *adapter = priv->adapter; + int i; + + adapter->fw_cap_info = le32_to_cpu(hw_spec->fw_cap_info); + + if (IS_SUPPORT_MULTI_BANDS(adapter)) + adapter->fw_bands = (u8) GET_FW_DEFAULT_BANDS(adapter); + else + adapter->fw_bands = BAND_B; + + adapter->config_bands = adapter->fw_bands; + + if (adapter->fw_bands & BAND_A) { + if (adapter->fw_bands & BAND_GN) { + adapter->config_bands |= BAND_AN; + adapter->fw_bands |= BAND_AN; + } + if (adapter->fw_bands & BAND_AN) { + adapter->adhoc_start_band = BAND_A | BAND_AN; + adapter->adhoc_11n_enabled = true; + } else { + adapter->adhoc_start_band = BAND_A; + } + priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL_A; + } else if (adapter->fw_bands & BAND_GN) { + adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN; + priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL; + adapter->adhoc_11n_enabled = true; + } else if (adapter->fw_bands & BAND_G) { + adapter->adhoc_start_band = BAND_G | BAND_B; + priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL; + } else if (adapter->fw_bands & BAND_B) { + adapter->adhoc_start_band = BAND_B; + priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL; + } + + adapter->fw_release_number = le32_to_cpu(hw_spec->fw_release_number); + adapter->number_of_antenna = le16_to_cpu(hw_spec->number_of_antenna); + + dev_dbg(adapter->dev, "info: GET_HW_SPEC: fw_release_number- %#x\n", + adapter->fw_release_number); + dev_dbg(adapter->dev, "info: GET_HW_SPEC: permanent addr: %pM\n", + hw_spec->permanent_addr); + dev_dbg(adapter->dev, "info: GET_HW_SPEC: hw_if_version=%#x version=%#x\n", + le16_to_cpu(hw_spec->hw_if_version), + le16_to_cpu(hw_spec->version)); + + if (priv->curr_addr[0] == 0xff) + memmove(priv->curr_addr, hw_spec->permanent_addr, ETH_ALEN); + + adapter->region_code = le16_to_cpu(hw_spec->region_code); + + for (i = 0; i < MWIFIEX_MAX_REGION_CODE; i++) + /* Use the region code to search for the index */ + if (adapter->region_code == region_code_index[i]) + break; + + /* If it's unidentified region code, use the default (USA) */ + if (i >= MWIFIEX_MAX_REGION_CODE) { + adapter->region_code = 0x10; + dev_dbg(adapter->dev, "cmd: unknown region code, use default (USA)\n"); + } + + adapter->hw_dot_11n_dev_cap = le32_to_cpu(hw_spec->dot_11n_dev_cap); + adapter->hw_dev_mcs_support = hw_spec->dev_mcs_support; + + if (adapter->if_ops.update_mp_end_port) + adapter->if_ops.update_mp_end_port(adapter, + le16_to_cpu(hw_spec->mp_end_port)); + + return 0; +} diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c new file mode 100644 index 000000000000..63b09692f27d --- /dev/null +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -0,0 +1,773 @@ +/* + * Marvell Wireless LAN device driver: debugfs + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include <linux/debugfs.h> + +#include "main.h" +#include "11n.h" + + +static struct dentry *mwifiex_dfs_dir; + +static char *bss_modes[] = { + "Unknown", + "Managed", + "Ad-hoc", + "Auto" +}; + +/* size/addr for mwifiex_debug_info */ +#define item_size(n) (FIELD_SIZEOF(struct mwifiex_debug_info, n)) +#define item_addr(n) (offsetof(struct mwifiex_debug_info, n)) + +/* size/addr for struct mwifiex_adapter */ +#define adapter_item_size(n) (FIELD_SIZEOF(struct mwifiex_adapter, n)) +#define adapter_item_addr(n) (offsetof(struct mwifiex_adapter, n)) + +struct mwifiex_debug_data { + char name[32]; /* variable/array name */ + u32 size; /* size of the variable/array */ + size_t addr; /* address of the variable/array */ + int num; /* number of variables in an array */ +}; + +static struct mwifiex_debug_data items[] = { + {"int_counter", item_size(int_counter), + item_addr(int_counter), 1}, + {"wmm_ac_vo", item_size(packets_out[WMM_AC_VO]), + item_addr(packets_out[WMM_AC_VO]), 1}, + {"wmm_ac_vi", item_size(packets_out[WMM_AC_VI]), + item_addr(packets_out[WMM_AC_VI]), 1}, + {"wmm_ac_be", item_size(packets_out[WMM_AC_BE]), + item_addr(packets_out[WMM_AC_BE]), 1}, + {"wmm_ac_bk", item_size(packets_out[WMM_AC_BK]), + item_addr(packets_out[WMM_AC_BK]), 1}, + {"max_tx_buf_size", item_size(max_tx_buf_size), + item_addr(max_tx_buf_size), 1}, + {"tx_buf_size", item_size(tx_buf_size), + item_addr(tx_buf_size), 1}, + {"curr_tx_buf_size", item_size(curr_tx_buf_size), + item_addr(curr_tx_buf_size), 1}, + {"ps_mode", item_size(ps_mode), + item_addr(ps_mode), 1}, + {"ps_state", item_size(ps_state), + item_addr(ps_state), 1}, + {"is_deep_sleep", item_size(is_deep_sleep), + item_addr(is_deep_sleep), 1}, + {"wakeup_dev_req", item_size(pm_wakeup_card_req), + item_addr(pm_wakeup_card_req), 1}, + {"wakeup_tries", item_size(pm_wakeup_fw_try), + item_addr(pm_wakeup_fw_try), 1}, + {"hs_configured", item_size(is_hs_configured), + item_addr(is_hs_configured), 1}, + {"hs_activated", item_size(hs_activated), + item_addr(hs_activated), 1}, + {"num_tx_timeout", item_size(num_tx_timeout), + item_addr(num_tx_timeout), 1}, + {"num_cmd_timeout", item_size(num_cmd_timeout), + item_addr(num_cmd_timeout), 1}, + {"timeout_cmd_id", item_size(timeout_cmd_id), + item_addr(timeout_cmd_id), 1}, + {"timeout_cmd_act", item_size(timeout_cmd_act), + item_addr(timeout_cmd_act), 1}, + {"last_cmd_id", item_size(last_cmd_id), + item_addr(last_cmd_id), DBG_CMD_NUM}, + {"last_cmd_act", item_size(last_cmd_act), + item_addr(last_cmd_act), DBG_CMD_NUM}, + {"last_cmd_index", item_size(last_cmd_index), + item_addr(last_cmd_index), 1}, + {"last_cmd_resp_id", item_size(last_cmd_resp_id), + item_addr(last_cmd_resp_id), DBG_CMD_NUM}, + {"last_cmd_resp_index", item_size(last_cmd_resp_index), + item_addr(last_cmd_resp_index), 1}, + {"last_event", item_size(last_event), + item_addr(last_event), DBG_CMD_NUM}, + {"last_event_index", item_size(last_event_index), + item_addr(last_event_index), 1}, + {"num_cmd_h2c_fail", item_size(num_cmd_host_to_card_failure), + item_addr(num_cmd_host_to_card_failure), 1}, + {"num_cmd_sleep_cfm_fail", + item_size(num_cmd_sleep_cfm_host_to_card_failure), + item_addr(num_cmd_sleep_cfm_host_to_card_failure), 1}, + {"num_tx_h2c_fail", item_size(num_tx_host_to_card_failure), + item_addr(num_tx_host_to_card_failure), 1}, + {"num_evt_deauth", item_size(num_event_deauth), + item_addr(num_event_deauth), 1}, + {"num_evt_disassoc", item_size(num_event_disassoc), + item_addr(num_event_disassoc), 1}, + {"num_evt_link_lost", item_size(num_event_link_lost), + item_addr(num_event_link_lost), 1}, + {"num_cmd_deauth", item_size(num_cmd_deauth), + item_addr(num_cmd_deauth), 1}, + {"num_cmd_assoc_ok", item_size(num_cmd_assoc_success), + item_addr(num_cmd_assoc_success), 1}, + {"num_cmd_assoc_fail", item_size(num_cmd_assoc_failure), + item_addr(num_cmd_assoc_failure), 1}, + {"cmd_sent", item_size(cmd_sent), + item_addr(cmd_sent), 1}, + {"data_sent", item_size(data_sent), + item_addr(data_sent), 1}, + {"cmd_resp_received", item_size(cmd_resp_received), + item_addr(cmd_resp_received), 1}, + {"event_received", item_size(event_received), + item_addr(event_received), 1}, + + /* variables defined in struct mwifiex_adapter */ + {"ioctl_pending", adapter_item_size(ioctl_pending), + adapter_item_addr(ioctl_pending), 1}, + {"tx_pending", adapter_item_size(tx_pending), + adapter_item_addr(tx_pending), 1}, + {"rx_pending", adapter_item_size(rx_pending), + adapter_item_addr(rx_pending), 1}, +}; + +static int num_of_items = ARRAY_SIZE(items); + +/* + * Generic proc file open handler. + * + * This function is called every time a file is accessed for read or write. + */ +static int +mwifiex_open_generic(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +/* + * Proc info file read handler. + * + * This function is called when the 'info' file is opened for reading. + * It prints the following driver related information - + * - Driver name + * - Driver version + * - Driver extended version + * - Interface name + * - BSS mode + * - Media state (connected or disconnected) + * - MAC address + * - Total number of Tx bytes + * - Total number of Rx bytes + * - Total number of Tx packets + * - Total number of Rx packets + * - Total number of dropped Tx packets + * - Total number of dropped Rx packets + * - Total number of corrupted Tx packets + * - Total number of corrupted Rx packets + * - Carrier status (on or off) + * - Tx queue status (started or stopped) + * + * For STA mode drivers, it also prints the following extra - + * - ESSID + * - BSSID + * - Channel + * - Region code + * - Multicast count + * - Multicast addresses + */ +static ssize_t +mwifiex_info_read(struct file *file, char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct mwifiex_private *priv = + (struct mwifiex_private *) file->private_data; + struct net_device *netdev = priv->netdev; + struct netdev_hw_addr *ha; + unsigned long page = get_zeroed_page(GFP_KERNEL); + char *p = (char *) page, fmt[64]; + struct mwifiex_bss_info info; + ssize_t ret = 0; + int i = 0; + + if (!p) + return -ENOMEM; + + memset(&info, 0, sizeof(info)); + ret = mwifiex_get_bss_info(priv, &info); + if (ret) + goto free_and_exit; + + mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1); + + if (!priv->version_str[0]) + mwifiex_get_ver_ext(priv); + + p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); + p += sprintf(p, "driver_version = %s", fmt); + p += sprintf(p, "\nverext = %s", priv->version_str); + p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); + p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); + p += sprintf(p, "media_state=\"%s\"\n", + (!priv->media_connected ? "Disconnected" : "Connected")); + p += sprintf(p, "mac_address=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n", + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + + if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) { + p += sprintf(p, "multicast_count=\"%d\"\n", + netdev_mc_count(netdev)); + p += sprintf(p, "essid=\"%s\"\n", info.ssid.ssid); + p += sprintf(p, "bssid=\"%02x:%02x:%02x:%02x:%02x:%02x\"\n", + info.bssid[0], info.bssid[1], + info.bssid[2], info.bssid[3], + info.bssid[4], info.bssid[5]); + p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan); + p += sprintf(p, "region_code = \"%02x\"\n", info.region_code); + + netdev_for_each_mc_addr(ha, netdev) + p += sprintf(p, "multicast_address[%d]=" + "\"%02x:%02x:%02x:%02x:%02x:%02x\"\n", i++, + ha->addr[0], ha->addr[1], + ha->addr[2], ha->addr[3], + ha->addr[4], ha->addr[5]); + } + + p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes); + p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes); + p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets); + p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets); + p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped); + p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped); + p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors); + p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors); + p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev)) + ? "on" : "off")); + p += sprintf(p, "tx queue %s\n", ((netif_queue_stopped(priv->netdev)) + ? "stopped" : "started")); + + ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, + (unsigned long) p - page); + +free_and_exit: + free_page(page); + return ret; +} + +/* + * Proc getlog file read handler. + * + * This function is called when the 'getlog' file is opened for reading + * It prints the following log information - + * - Number of multicast Tx frames + * - Number of failed packets + * - Number of Tx retries + * - Number of multicast Tx retries + * - Number of duplicate frames + * - Number of RTS successes + * - Number of RTS failures + * - Number of ACK failures + * - Number of fragmented Rx frames + * - Number of multicast Rx frames + * - Number of FCS errors + * - Number of Tx frames + * - WEP ICV error counts + */ +static ssize_t +mwifiex_getlog_read(struct file *file, char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct mwifiex_private *priv = + (struct mwifiex_private *) file->private_data; + unsigned long page = get_zeroed_page(GFP_KERNEL); + char *p = (char *) page; + ssize_t ret = 0; + struct mwifiex_ds_get_stats stats; + + if (!p) + return -ENOMEM; + + memset(&stats, 0, sizeof(stats)); + ret = mwifiex_get_stats_info(priv, &stats); + if (ret) + goto free_and_exit; + + p += sprintf(p, "\n" + "mcasttxframe %u\n" + "failed %u\n" + "retry %u\n" + "multiretry %u\n" + "framedup %u\n" + "rtssuccess %u\n" + "rtsfailure %u\n" + "ackfailure %u\n" + "rxfrag %u\n" + "mcastrxframe %u\n" + "fcserror %u\n" + "txframe %u\n" + "wepicverrcnt-1 %u\n" + "wepicverrcnt-2 %u\n" + "wepicverrcnt-3 %u\n" + "wepicverrcnt-4 %u\n", + stats.mcast_tx_frame, + stats.failed, + stats.retry, + stats.multi_retry, + stats.frame_dup, + stats.rts_success, + stats.rts_failure, + stats.ack_failure, + stats.rx_frag, + stats.mcast_rx_frame, + stats.fcs_error, + stats.tx_frame, + stats.wep_icv_error[0], + stats.wep_icv_error[1], + stats.wep_icv_error[2], + stats.wep_icv_error[3]); + + + ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, + (unsigned long) p - page); + +free_and_exit: + free_page(page); + return ret; +} + +static struct mwifiex_debug_info info; + +/* + * Proc debug file read handler. + * + * This function is called when the 'debug' file is opened for reading + * It prints the following log information - + * - Interrupt count + * - WMM AC VO packets count + * - WMM AC VI packets count + * - WMM AC BE packets count + * - WMM AC BK packets count + * - Maximum Tx buffer size + * - Tx buffer size + * - Current Tx buffer size + * - Power Save mode + * - Power Save state + * - Deep Sleep status + * - Device wakeup required status + * - Number of wakeup tries + * - Host Sleep configured status + * - Host Sleep activated status + * - Number of Tx timeouts + * - Number of command timeouts + * - Last timed out command ID + * - Last timed out command action + * - Last command ID + * - Last command action + * - Last command index + * - Last command response ID + * - Last command response index + * - Last event + * - Last event index + * - Number of host to card command failures + * - Number of sleep confirm command failures + * - Number of host to card data failure + * - Number of deauthentication events + * - Number of disassociation events + * - Number of link lost events + * - Number of deauthentication commands + * - Number of association success commands + * - Number of association failure commands + * - Number of commands sent + * - Number of data packets sent + * - Number of command responses received + * - Number of events received + * - Tx BA stream table (TID, RA) + * - Rx reorder table (TID, TA, Start window, Window size, Buffer) + */ +static ssize_t +mwifiex_debug_read(struct file *file, char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct mwifiex_private *priv = + (struct mwifiex_private *) file->private_data; + struct mwifiex_debug_data *d = &items[0]; + unsigned long page = get_zeroed_page(GFP_KERNEL); + char *p = (char *) page; + ssize_t ret = 0; + size_t size, addr; + long val; + int i, j; + + if (!p) + return -ENOMEM; + + ret = mwifiex_get_debug_info(priv, &info); + if (ret) + goto free_and_exit; + + for (i = 0; i < num_of_items; i++) { + p += sprintf(p, "%s=", d[i].name); + + size = d[i].size / d[i].num; + + if (i < (num_of_items - 3)) + addr = d[i].addr + (size_t) &info; + else /* The last 3 items are struct mwifiex_adapter variables */ + addr = d[i].addr + (size_t) priv->adapter; + + for (j = 0; j < d[i].num; j++) { + switch (size) { + case 1: + val = *((u8 *) addr); + break; + case 2: + val = *((u16 *) addr); + break; + case 4: + val = *((u32 *) addr); + break; + case 8: + val = *((long long *) addr); + break; + default: + val = -1; + break; + } + + p += sprintf(p, "%#lx ", val); + addr += size; + } + + p += sprintf(p, "\n"); + } + + if (info.tx_tbl_num) { + p += sprintf(p, "Tx BA stream table:\n"); + for (i = 0; i < info.tx_tbl_num; i++) + p += sprintf(p, "tid = %d, " + "ra = %02x:%02x:%02x:%02x:%02x:%02x\n", + info.tx_tbl[i].tid, info.tx_tbl[i].ra[0], + info.tx_tbl[i].ra[1], info.tx_tbl[i].ra[2], + info.tx_tbl[i].ra[3], info.tx_tbl[i].ra[4], + info.tx_tbl[i].ra[5]); + } + + if (info.rx_tbl_num) { + p += sprintf(p, "Rx reorder table:\n"); + for (i = 0; i < info.rx_tbl_num; i++) { + + p += sprintf(p, "tid = %d, " + "ta = %02x:%02x:%02x:%02x:%02x:%02x, " + "start_win = %d, " + "win_size = %d, buffer: ", + info.rx_tbl[i].tid, + info.rx_tbl[i].ta[0], info.rx_tbl[i].ta[1], + info.rx_tbl[i].ta[2], info.rx_tbl[i].ta[3], + info.rx_tbl[i].ta[4], info.rx_tbl[i].ta[5], + info.rx_tbl[i].start_win, + info.rx_tbl[i].win_size); + + for (j = 0; j < info.rx_tbl[i].win_size; j++) + p += sprintf(p, "%c ", + info.rx_tbl[i].buffer[j] ? + '1' : '0'); + + p += sprintf(p, "\n"); + } + } + + ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, + (unsigned long) p - page); + +free_and_exit: + free_page(page); + return ret; +} + +static u32 saved_reg_type, saved_reg_offset, saved_reg_value; + +/* + * Proc regrdwr file write handler. + * + * This function is called when the 'regrdwr' file is opened for writing + * + * This function can be used to write to a register. + */ +static ssize_t +mwifiex_regrdwr_write(struct file *file, + const char __user *ubuf, size_t count, loff_t *ppos) +{ + unsigned long addr = get_zeroed_page(GFP_KERNEL); + char *buf = (char *) addr; + size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1)); + int ret = 0; + u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX; + + if (!buf) + return -ENOMEM; + + + if (copy_from_user(buf, ubuf, buf_size)) { + ret = -EFAULT; + goto done; + } + + sscanf(buf, "%u %x %x", ®_type, ®_offset, ®_value); + + if (reg_type == 0 || reg_offset == 0) { + ret = -EINVAL; + goto done; + } else { + saved_reg_type = reg_type; + saved_reg_offset = reg_offset; + saved_reg_value = reg_value; + ret = count; + } +done: + free_page(addr); + return ret; +} + +/* + * Proc regrdwr file read handler. + * + * This function is called when the 'regrdwr' file is opened for reading + * + * This function can be used to read from a register. + */ +static ssize_t +mwifiex_regrdwr_read(struct file *file, char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct mwifiex_private *priv = + (struct mwifiex_private *) file->private_data; + unsigned long addr = get_zeroed_page(GFP_KERNEL); + char *buf = (char *) addr; + int pos = 0, ret = 0; + u32 reg_value; + + if (!buf) + return -ENOMEM; + + if (!saved_reg_type) { + /* No command has been given */ + pos += snprintf(buf, PAGE_SIZE, "0"); + goto done; + } + /* Set command has been given */ + if (saved_reg_value != UINT_MAX) { + ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset, + saved_reg_value); + + pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", + saved_reg_type, saved_reg_offset, + saved_reg_value); + + ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); + + goto done; + } + /* Get command has been given */ + ret = mwifiex_reg_read(priv, saved_reg_type, + saved_reg_offset, ®_value); + if (ret) { + ret = -EINVAL; + goto done; + } + + pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type, + saved_reg_offset, reg_value); + + ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); + +done: + free_page(addr); + return ret; +} + +static u32 saved_offset = -1, saved_bytes = -1; + +/* + * Proc rdeeprom file write handler. + * + * This function is called when the 'rdeeprom' file is opened for writing + * + * This function can be used to write to a RDEEPROM location. + */ +static ssize_t +mwifiex_rdeeprom_write(struct file *file, + const char __user *ubuf, size_t count, loff_t *ppos) +{ + unsigned long addr = get_zeroed_page(GFP_KERNEL); + char *buf = (char *) addr; + size_t buf_size = min(count, (size_t) (PAGE_SIZE - 1)); + int ret = 0; + int offset = -1, bytes = -1; + + if (!buf) + return -ENOMEM; + + + if (copy_from_user(buf, ubuf, buf_size)) { + ret = -EFAULT; + goto done; + } + + sscanf(buf, "%d %d", &offset, &bytes); + + if (offset == -1 || bytes == -1) { + ret = -EINVAL; + goto done; + } else { + saved_offset = offset; + saved_bytes = bytes; + ret = count; + } +done: + free_page(addr); + return ret; +} + +/* + * Proc rdeeprom read write handler. + * + * This function is called when the 'rdeeprom' file is opened for reading + * + * This function can be used to read from a RDEEPROM location. + */ +static ssize_t +mwifiex_rdeeprom_read(struct file *file, char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct mwifiex_private *priv = + (struct mwifiex_private *) file->private_data; + unsigned long addr = get_zeroed_page(GFP_KERNEL); + char *buf = (char *) addr; + int pos = 0, ret = 0, i = 0; + u8 value[MAX_EEPROM_DATA]; + + if (!buf) + return -ENOMEM; + + if (saved_offset == -1) { + /* No command has been given */ + pos += snprintf(buf, PAGE_SIZE, "0"); + goto done; + } + + /* Get command has been given */ + ret = mwifiex_eeprom_read(priv, (u16) saved_offset, + (u16) saved_bytes, value); + if (ret) { + ret = -EINVAL; + goto done; + } + + pos += snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes); + + for (i = 0; i < saved_bytes; i++) + pos += snprintf(buf + strlen(buf), PAGE_SIZE, "%d ", value[i]); + + ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); + +done: + free_page(addr); + return ret; +} + + +#define MWIFIEX_DFS_ADD_FILE(name) do { \ + if (!debugfs_create_file(#name, 0644, priv->dfs_dev_dir, \ + priv, &mwifiex_dfs_##name##_fops)) \ + return; \ +} while (0); + +#define MWIFIEX_DFS_FILE_OPS(name) \ +static const struct file_operations mwifiex_dfs_##name##_fops = { \ + .read = mwifiex_##name##_read, \ + .write = mwifiex_##name##_write, \ + .open = mwifiex_open_generic, \ +}; + +#define MWIFIEX_DFS_FILE_READ_OPS(name) \ +static const struct file_operations mwifiex_dfs_##name##_fops = { \ + .read = mwifiex_##name##_read, \ + .open = mwifiex_open_generic, \ +}; + +#define MWIFIEX_DFS_FILE_WRITE_OPS(name) \ +static const struct file_operations mwifiex_dfs_##name##_fops = { \ + .write = mwifiex_##name##_write, \ + .open = mwifiex_open_generic, \ +}; + + +MWIFIEX_DFS_FILE_READ_OPS(info); +MWIFIEX_DFS_FILE_READ_OPS(debug); +MWIFIEX_DFS_FILE_READ_OPS(getlog); +MWIFIEX_DFS_FILE_OPS(regrdwr); +MWIFIEX_DFS_FILE_OPS(rdeeprom); + +/* + * This function creates the debug FS directory structure and the files. + */ +void +mwifiex_dev_debugfs_init(struct mwifiex_private *priv) +{ + if (!mwifiex_dfs_dir || !priv) + return; + + priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name, + mwifiex_dfs_dir); + + if (!priv->dfs_dev_dir) + return; + + MWIFIEX_DFS_ADD_FILE(info); + MWIFIEX_DFS_ADD_FILE(debug); + MWIFIEX_DFS_ADD_FILE(getlog); + MWIFIEX_DFS_ADD_FILE(regrdwr); + MWIFIEX_DFS_ADD_FILE(rdeeprom); + + return; +} + +/* + * This function removes the debug FS directory structure and the files. + */ +void +mwifiex_dev_debugfs_remove(struct mwifiex_private *priv) +{ + if (!priv) + return; + + debugfs_remove_recursive(priv->dfs_dev_dir); + return; +} + +/* + * This function creates the top level proc directory. + */ +void +mwifiex_debugfs_init(void) +{ + if (!mwifiex_dfs_dir) + mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL); +} + +/* + * This function removes the top level proc directory. + */ +void +mwifiex_debugfs_remove(void) +{ + if (mwifiex_dfs_dir) + debugfs_remove(mwifiex_dfs_dir); +} diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h new file mode 100644 index 000000000000..c3c15f9e757e --- /dev/null +++ b/drivers/net/wireless/mwifiex/decl.h @@ -0,0 +1,153 @@ +/* + * Marvell Wireless LAN device driver: generic data structures and APIs + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_DECL_H_ +#define _MWIFIEX_DECL_H_ + +#undef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/wait.h> +#include <linux/timer.h> +#include <linux/ieee80211.h> + + +#define MWIFIEX_MAX_BSS_NUM (1) + +#define MWIFIEX_MIN_DATA_HEADER_LEN 32 /* (sizeof(mwifiex_txpd)) */ + +#define MWIFIEX_MAX_TX_BASTREAM_SUPPORTED 2 +#define MWIFIEX_MAX_RX_BASTREAM_SUPPORTED 16 + +#define MWIFIEX_AMPDU_DEF_TXWINSIZE 32 +#define MWIFIEX_AMPDU_DEF_RXWINSIZE 16 +#define MWIFIEX_DEFAULT_BLOCK_ACK_TIMEOUT 0xffff + +#define MWIFIEX_RATE_INDEX_HRDSSS0 0 +#define MWIFIEX_RATE_INDEX_HRDSSS3 3 +#define MWIFIEX_RATE_INDEX_OFDM0 4 +#define MWIFIEX_RATE_INDEX_OFDM7 11 +#define MWIFIEX_RATE_INDEX_MCS0 12 + +#define MWIFIEX_RATE_BITMAP_OFDM0 16 +#define MWIFIEX_RATE_BITMAP_OFDM7 23 +#define MWIFIEX_RATE_BITMAP_MCS0 32 +#define MWIFIEX_RATE_BITMAP_MCS127 159 + +#define MWIFIEX_RX_DATA_BUF_SIZE (4 * 1024) + +#define MWIFIEX_RTS_MIN_VALUE (0) +#define MWIFIEX_RTS_MAX_VALUE (2347) +#define MWIFIEX_FRAG_MIN_VALUE (256) +#define MWIFIEX_FRAG_MAX_VALUE (2346) + +#define MWIFIEX_SDIO_BLOCK_SIZE 256 + +#define MWIFIEX_BUF_FLAG_REQUEUED_PKT BIT(0) + +enum mwifiex_error_code { + MWIFIEX_ERROR_NO_ERROR = 0, + MWIFIEX_ERROR_FW_NOT_READY = 0x00000001, + MWIFIEX_ERROR_FW_BUSY, + MWIFIEX_ERROR_FW_CMDRESP, + MWIFIEX_ERROR_PKT_SIZE_INVALID = 0x80000001, + MWIFIEX_ERROR_PKT_TIMEOUT, + MWIFIEX_ERROR_CMD_INVALID, + MWIFIEX_ERROR_CMD_TIMEOUT, + MWIFIEX_ERROR_CMD_DNLD_FAIL, + MWIFIEX_ERROR_CMD_CANCEL, + MWIFIEX_ERROR_CMD_RESP_FAIL, + MWIFIEX_ERROR_ASSOC_FAIL, + MWIFIEX_ERROR_EVENT_UNKNOWN, + MWIFIEX_ERROR_INVALID_PARAMETER, +}; + +enum mwifiex_bss_type { + MWIFIEX_BSS_TYPE_STA = 0, + MWIFIEX_BSS_TYPE_UAP = 1, + MWIFIEX_BSS_TYPE_ANY = 0xff, +}; + +enum mwifiex_bss_role { + MWIFIEX_BSS_ROLE_STA = 0, + MWIFIEX_BSS_ROLE_UAP = 1, + MWIFIEX_BSS_ROLE_ANY = 0xff, +}; + +#define BSS_ROLE_BIT_MASK BIT(0) + +#define GET_BSS_ROLE(priv) ((priv)->bss_role & BSS_ROLE_BIT_MASK) + +enum mwifiex_data_frame_type { + MWIFIEX_DATA_FRAME_TYPE_ETH_II = 0, + MWIFIEX_DATA_FRAME_TYPE_802_11, +}; + +struct mwifiex_fw_image { + u8 *helper_buf; + u32 helper_len; + u8 *fw_buf; + u32 fw_len; +}; + +struct mwifiex_802_11_ssid { + u32 ssid_len; + u8 ssid[IEEE80211_MAX_SSID_LEN]; +}; + +struct mwifiex_wait_queue { + u32 bss_index; + wait_queue_head_t *wait; + u16 *condition; + u32 start_time; + int status; + u32 enabled; +}; + +struct mwifiex_rxinfo { + u8 bss_index; + struct sk_buff *parent; + u8 use_count; +}; + +struct mwifiex_txinfo { + u32 status_code; + u8 flags; + u8 bss_index; +}; + +struct mwifiex_bss_attr { + u32 bss_type; + u32 frame_type; + u32 active; + u32 bss_priority; + u32 bss_num; +}; + +enum mwifiex_wmm_ac_e { + WMM_AC_BK, + WMM_AC_BE, + WMM_AC_VI, + WMM_AC_VO +} __packed; + +struct mwifiex_device { + struct mwifiex_bss_attr bss_attr[MWIFIEX_MAX_BSS_NUM]; +}; +#endif /* !_MWIFIEX_DECL_H_ */ diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h new file mode 100644 index 000000000000..2b938115b26a --- /dev/null +++ b/drivers/net/wireless/mwifiex/fw.h @@ -0,0 +1,1229 @@ +/* + * Marvell Wireless LAN device driver: Firmware specific macros & structures + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_FW_H_ +#define _MWIFIEX_FW_H_ + +#include <linux/if_ether.h> + + +#define INTF_HEADER_LEN 4 + +struct rfc_1042_hdr { + u8 llc_dsap; + u8 llc_ssap; + u8 llc_ctrl; + u8 snap_oui[3]; + u16 snap_type; +}; + +struct rx_packet_hdr { + struct ethhdr eth803_hdr; + struct rfc_1042_hdr rfc1042_hdr; +}; + +struct tx_packet_hdr { + struct ethhdr eth803_hdr; + struct rfc_1042_hdr rfc1042_hdr; +}; + +#define B_SUPPORTED_RATES 5 +#define G_SUPPORTED_RATES 9 +#define BG_SUPPORTED_RATES 13 +#define A_SUPPORTED_RATES 9 +#define HOSTCMD_SUPPORTED_RATES 14 +#define N_SUPPORTED_RATES 3 +#define ALL_802_11_BANDS (BAND_A | BAND_B | BAND_G | BAND_GN) + +#define FW_MULTI_BANDS_SUPPORT (BIT(8) | BIT(9) | BIT(10) | BIT(11)) +#define IS_SUPPORT_MULTI_BANDS(adapter) \ + (adapter->fw_cap_info & FW_MULTI_BANDS_SUPPORT) +#define GET_FW_DEFAULT_BANDS(adapter) \ + ((adapter->fw_cap_info >> 8) & ALL_802_11_BANDS) + +extern u8 supported_rates_b[B_SUPPORTED_RATES]; +extern u8 supported_rates_g[G_SUPPORTED_RATES]; +extern u8 supported_rates_bg[BG_SUPPORTED_RATES]; +extern u8 supported_rates_a[A_SUPPORTED_RATES]; +extern u8 supported_rates_n[N_SUPPORTED_RATES]; + +#define HostCmd_WEP_KEY_INDEX_MASK 0x3fff + +#define KEY_INFO_ENABLED 0x01 +enum KEY_TYPE_ID { + KEY_TYPE_ID_WEP = 0, + KEY_TYPE_ID_TKIP, + KEY_TYPE_ID_AES, + KEY_TYPE_ID_WAPI, +}; + +enum KEY_INFO_WEP { + KEY_INFO_WEP_MCAST = 0x01, + KEY_INFO_WEP_UNICAST = 0x02, + KEY_INFO_WEP_ENABLED = 0x04 +}; + +enum KEY_INFO_TKIP { + KEY_INFO_TKIP_MCAST = 0x01, + KEY_INFO_TKIP_UNICAST = 0x02, + KEY_INFO_TKIP_ENABLED = 0x04 +}; + +enum KEY_INFO_AES { + KEY_INFO_AES_MCAST = 0x01, + KEY_INFO_AES_UNICAST = 0x02, + KEY_INFO_AES_ENABLED = 0x04 +}; + +#define WAPI_KEY_LEN 50 + +enum KEY_INFO_WAPI { + KEY_INFO_WAPI_MCAST = 0x01, + KEY_INFO_WAPI_UNICAST = 0x02, + KEY_INFO_WAPI_ENABLED = 0x04 +}; + +#define MAX_POLL_TRIES 100 + +#define MAX_MULTI_INTERFACE_POLL_TRIES 1000 + +#define MAX_FIRMWARE_POLL_TRIES 100 + +#define FIRMWARE_READY 0xfedc + +enum MWIFIEX_802_11_PRIVACY_FILTER { + MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL, + MWIFIEX_802_11_PRIV_FILTER_8021X_WEP +}; + +enum MWIFIEX_802_11_WEP_STATUS { + MWIFIEX_802_11_WEP_ENABLED, + MWIFIEX_802_11_WEP_DISABLED, +}; + +#define CAL_SNR(RSSI, NF) ((s16)((s16)(RSSI)-(s16)(NF))) + +#define PROPRIETARY_TLV_BASE_ID 0x0100 +#define TLV_TYPE_KEY_MATERIAL (PROPRIETARY_TLV_BASE_ID + 0) +#define TLV_TYPE_CHANLIST (PROPRIETARY_TLV_BASE_ID + 1) +#define TLV_TYPE_NUMPROBES (PROPRIETARY_TLV_BASE_ID + 2) +#define TLV_TYPE_PASSTHROUGH (PROPRIETARY_TLV_BASE_ID + 10) +#define TLV_TYPE_WMMQSTATUS (PROPRIETARY_TLV_BASE_ID + 16) +#define TLV_TYPE_WILDCARDSSID (PROPRIETARY_TLV_BASE_ID + 18) +#define TLV_TYPE_TSFTIMESTAMP (PROPRIETARY_TLV_BASE_ID + 19) +#define TLV_TYPE_AUTH_TYPE (PROPRIETARY_TLV_BASE_ID + 31) +#define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42) +#define TLV_TYPE_RATE_DROP_CONTROL (PROPRIETARY_TLV_BASE_ID + 82) +#define TLV_TYPE_RATE_SCOPE (PROPRIETARY_TLV_BASE_ID + 83) +#define TLV_TYPE_POWER_GROUP (PROPRIETARY_TLV_BASE_ID + 84) +#define TLV_TYPE_WAPI_IE (PROPRIETARY_TLV_BASE_ID + 94) +#define TLV_TYPE_AUTO_DS_PARAM (PROPRIETARY_TLV_BASE_ID + 113) +#define TLV_TYPE_PS_PARAM (PROPRIETARY_TLV_BASE_ID + 114) + +#define MWIFIEX_TX_DATA_BUF_SIZE_2K 2048 + +#define SSN_MASK 0xfff0 + +#define BA_RESULT_SUCCESS 0x0 +#define BA_RESULT_TIMEOUT 0x2 + +#define IS_BASTREAM_SETUP(ptr) (ptr->ba_status) + +#define BA_STREAM_NOT_ALLOWED 0xff + +#define IS_11N_ENABLED(priv) ((priv->adapter->config_bands & BAND_GN || \ + priv->adapter->config_bands & BAND_AN) \ + && priv->curr_bss_params.bss_descriptor.bcn_ht_cap) +#define INITIATOR_BIT(DelBAParamSet) (((DelBAParamSet) &\ + BIT(DELBA_INITIATOR_POS)) >> DELBA_INITIATOR_POS) + +#define MWIFIEX_TX_DATA_BUF_SIZE_4K 4096 +#define MWIFIEX_TX_DATA_BUF_SIZE_8K 8192 +#define NON_GREENFIELD_STAS 0x04 + +#define ISSUPP_11NENABLED(FwCapInfo) (FwCapInfo & BIT(11)) + +/* dev_cap bitmap + * BIT + * 0-16 reserved + * 17 IEEE80211_HT_CAP_SUP_WIDTH_20_40 + * 18-22 reserved + * 23 IEEE80211_HT_CAP_SGI_20 + * 24 IEEE80211_HT_CAP_SGI_40 + * 25 IEEE80211_HT_CAP_TX_STBC + * 26 IEEE80211_HT_CAP_RX_STBC + * 27-28 reserved + * 29 IEEE80211_HT_CAP_GRN_FLD + * 30-31 reserved + */ +#define ISSUPP_CHANWIDTH40(Dot11nDevCap) (Dot11nDevCap & BIT(17)) +#define ISSUPP_SHORTGI20(Dot11nDevCap) (Dot11nDevCap & BIT(23)) +#define ISSUPP_SHORTGI40(Dot11nDevCap) (Dot11nDevCap & BIT(24)) +#define ISSUPP_TXSTBC(Dot11nDevCap) (Dot11nDevCap & BIT(25)) +#define ISSUPP_RXSTBC(Dot11nDevCap) (Dot11nDevCap & BIT(26)) +#define ISSUPP_GREENFIELD(Dot11nDevCap) (Dot11nDevCap & BIT(29)) + +#define GET_RXMCSSUPP(DevMCSSupported) (DevMCSSupported & 0x0f) +#define RESETHT_EXTCAP_RDG(HTExtCap) (HTExtCap &= ~BIT(11)) +#define SETHT_MCS32(x) (x[4] |= 1) + +#define SET_SECONDARYCHAN(RadioType, SECCHAN) (RadioType |= (SECCHAN << 4)) + +#define LLC_SNAP_LEN 8 + +#define MOD_CLASS_HR_DSSS 0x03 +#define MOD_CLASS_OFDM 0x07 +#define MOD_CLASS_HT 0x08 +#define HT_BW_20 0 +#define HT_BW_40 1 + +#define HostCmd_CMD_GET_HW_SPEC 0x0003 +#define HostCmd_CMD_802_11_SCAN 0x0006 +#define HostCmd_CMD_802_11_GET_LOG 0x000b +#define HostCmd_CMD_MAC_MULTICAST_ADR 0x0010 +#define HostCmd_CMD_802_11_EEPROM_ACCESS 0x0059 +#define HostCmd_CMD_802_11_ASSOCIATE 0x0012 +#define HostCmd_CMD_802_11_SNMP_MIB 0x0016 +#define HostCmd_CMD_MAC_REG_ACCESS 0x0019 +#define HostCmd_CMD_BBP_REG_ACCESS 0x001a +#define HostCmd_CMD_RF_REG_ACCESS 0x001b +#define HostCmd_CMD_PMIC_REG_ACCESS 0x00ad +#define HostCmd_CMD_802_11_RF_CHANNEL 0x001d +#define HostCmd_CMD_802_11_DEAUTHENTICATE 0x0024 +#define HostCmd_CMD_MAC_CONTROL 0x0028 +#define HostCmd_CMD_802_11_AD_HOC_START 0x002b +#define HostCmd_CMD_802_11_AD_HOC_JOIN 0x002c +#define HostCmd_CMD_802_11_AD_HOC_STOP 0x0040 +#define HostCmd_CMD_802_11_MAC_ADDRESS 0x004D +#define HostCmd_CMD_802_11D_DOMAIN_INFO 0x005b +#define HostCmd_CMD_802_11_KEY_MATERIAL 0x005e +#define HostCmd_CMD_802_11_BG_SCAN_QUERY 0x006c +#define HostCmd_CMD_WMM_GET_STATUS 0x0071 +#define HostCmd_CMD_802_11_TX_RATE_QUERY 0x007f +#define HostCmd_CMD_802_11_IBSS_COALESCING_STATUS 0x0083 +#define HostCmd_CMD_VERSION_EXT 0x0097 +#define HostCmd_CMD_RSSI_INFO 0x00a4 +#define HostCmd_CMD_FUNC_INIT 0x00a9 +#define HostCmd_CMD_FUNC_SHUTDOWN 0x00aa +#define HostCmd_CMD_11N_CFG 0x00cd +#define HostCmd_CMD_11N_ADDBA_REQ 0x00ce +#define HostCmd_CMD_11N_ADDBA_RSP 0x00cf +#define HostCmd_CMD_11N_DELBA 0x00d0 +#define HostCmd_CMD_RECONFIGURE_TX_BUFF 0x00d9 +#define HostCmd_CMD_AMSDU_AGGR_CTRL 0x00df +#define HostCmd_CMD_TXPWR_CFG 0x00d1 +#define HostCmd_CMD_TX_RATE_CFG 0x00d6 +#define HostCmd_CMD_802_11_PS_MODE_ENH 0x00e4 +#define HostCmd_CMD_802_11_HS_CFG_ENH 0x00e5 +#define HostCmd_CMD_CAU_REG_ACCESS 0x00ed +#define HostCmd_CMD_SET_BSS_MODE 0x00f7 + + +enum ENH_PS_MODES { + EN_PS = 1, + DIS_PS = 2, + EN_AUTO_DS = 3, + DIS_AUTO_DS = 4, + SLEEP_CONFIRM = 5, + GET_PS = 0, + EN_AUTO_PS = 0xff, + DIS_AUTO_PS = 0xfe, +}; + +#define HostCmd_RET_BIT 0x8000 +#define HostCmd_ACT_GEN_GET 0x0000 +#define HostCmd_ACT_GEN_SET 0x0001 +#define HostCmd_RESULT_OK 0x0000 + +#define HostCmd_ACT_MAC_RX_ON 0x0001 +#define HostCmd_ACT_MAC_TX_ON 0x0002 +#define HostCmd_ACT_MAC_WEP_ENABLE 0x0008 +#define HostCmd_ACT_MAC_ETHERNETII_ENABLE 0x0010 +#define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 +#define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 +#define HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON 0x2000 + +#define HostCmd_BSS_MODE_IBSS 0x0002 +#define HostCmd_BSS_MODE_ANY 0x0003 + +#define HostCmd_SCAN_RADIO_TYPE_BG 0 +#define HostCmd_SCAN_RADIO_TYPE_A 1 + +#define HOST_SLEEP_CFG_CANCEL 0xffffffff +#define HOST_SLEEP_CFG_COND_DEF 0x0000000f +#define HOST_SLEEP_CFG_GPIO_DEF 0xff +#define HOST_SLEEP_CFG_GAP_DEF 0 + +#define CMD_F_HOSTCMD (1 << 0) +#define CMD_F_CANCELED (1 << 1) + +#define HostCmd_CMD_ID_MASK 0x0fff + +#define HostCmd_SEQ_NUM_MASK 0x00ff + +#define HostCmd_BSS_NUM_MASK 0x0f00 + +#define HostCmd_BSS_TYPE_MASK 0xf000 + +#define HostCmd_SET_SEQ_NO_BSS_INFO(seq, num, type) { \ + (((seq) & 0x00ff) | \ + (((num) & 0x000f) << 8)) | \ + (((type) & 0x000f) << 12); } + +#define HostCmd_GET_SEQ_NO(seq) \ + ((seq) & HostCmd_SEQ_NUM_MASK) + +#define HostCmd_GET_BSS_NO(seq) \ + (((seq) & HostCmd_BSS_NUM_MASK) >> 8) + +#define HostCmd_GET_BSS_TYPE(seq) \ + (((seq) & HostCmd_BSS_TYPE_MASK) >> 12) + +#define EVENT_DUMMY_HOST_WAKEUP_SIGNAL 0x00000001 +#define EVENT_LINK_LOST 0x00000003 +#define EVENT_LINK_SENSED 0x00000004 +#define EVENT_MIB_CHANGED 0x00000006 +#define EVENT_INIT_DONE 0x00000007 +#define EVENT_DEAUTHENTICATED 0x00000008 +#define EVENT_DISASSOCIATED 0x00000009 +#define EVENT_PS_AWAKE 0x0000000a +#define EVENT_PS_SLEEP 0x0000000b +#define EVENT_MIC_ERR_MULTICAST 0x0000000d +#define EVENT_MIC_ERR_UNICAST 0x0000000e +#define EVENT_DEEP_SLEEP_AWAKE 0x00000010 +#define EVENT_ADHOC_BCN_LOST 0x00000011 + +#define EVENT_WMM_STATUS_CHANGE 0x00000017 +#define EVENT_BG_SCAN_REPORT 0x00000018 +#define EVENT_RSSI_LOW 0x00000019 +#define EVENT_SNR_LOW 0x0000001a +#define EVENT_MAX_FAIL 0x0000001b +#define EVENT_RSSI_HIGH 0x0000001c +#define EVENT_SNR_HIGH 0x0000001d +#define EVENT_IBSS_COALESCED 0x0000001e +#define EVENT_DATA_RSSI_LOW 0x00000024 +#define EVENT_DATA_SNR_LOW 0x00000025 +#define EVENT_DATA_RSSI_HIGH 0x00000026 +#define EVENT_DATA_SNR_HIGH 0x00000027 +#define EVENT_LINK_QUALITY 0x00000028 +#define EVENT_PORT_RELEASE 0x0000002b +#define EVENT_PRE_BEACON_LOST 0x00000031 +#define EVENT_ADDBA 0x00000033 +#define EVENT_DELBA 0x00000034 +#define EVENT_BA_STREAM_TIEMOUT 0x00000037 +#define EVENT_AMSDU_AGGR_CTRL 0x00000042 +#define EVENT_WEP_ICV_ERR 0x00000046 +#define EVENT_HS_ACT_REQ 0x00000047 +#define EVENT_BW_CHANGE 0x00000048 + +#define EVENT_HOSTWAKE_STAIE 0x0000004d + +#define EVENT_ID_MASK 0xffff +#define BSS_NUM_MASK 0xf + +#define EVENT_GET_BSS_NUM(event_cause) \ + (((event_cause) >> 16) & BSS_NUM_MASK) + +#define EVENT_GET_BSS_TYPE(event_cause) \ + (((event_cause) >> 24) & 0x00ff) + +struct mwifiex_ie_types_header { + __le16 type; + __le16 len; +} __packed; + +struct mwifiex_ie_types_data { + struct mwifiex_ie_types_header header; + u8 data[1]; +} __packed; + +#define MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET 0x01 +#define MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET 0x08 + +struct txpd { + u8 bss_type; + u8 bss_num; + __le16 tx_pkt_length; + __le16 tx_pkt_offset; + __le16 tx_pkt_type; + __le32 tx_control; + u8 priority; + u8 flags; + u8 pkt_delay_2ms; + u8 reserved1; +} __packed; + +struct rxpd { + u8 bss_type; + u8 bss_num; + u16 rx_pkt_length; + u16 rx_pkt_offset; + u16 rx_pkt_type; + u16 seq_num; + u8 priority; + u8 rx_rate; + s8 snr; + s8 nf; + /* Ht Info [Bit 0] RxRate format: LG=0, HT=1 + * [Bit 1] HT Bandwidth: BW20 = 0, BW40 = 1 + * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 */ + u8 ht_info; + u8 reserved; +} __packed; + +enum mwifiex_chan_scan_mode_bitmasks { + MWIFIEX_PASSIVE_SCAN = BIT(0), + MWIFIEX_DISABLE_CHAN_FILT = BIT(1), +}; + +#define SECOND_CHANNEL_BELOW 0x30 +#define SECOND_CHANNEL_ABOVE 0x10 +struct mwifiex_chan_scan_param_set { + u8 radio_type; + u8 chan_number; + u8 chan_scan_mode_bitmap; + __le16 min_scan_time; + __le16 max_scan_time; +} __packed; + +struct mwifiex_ie_types_chan_list_param_set { + struct mwifiex_ie_types_header header; + struct mwifiex_chan_scan_param_set chan_scan_param[1]; +} __packed; + +struct chan_band_param_set { + u8 radio_type; + u8 chan_number; +}; + +struct mwifiex_ie_types_chan_band_list_param_set { + struct mwifiex_ie_types_header header; + struct chan_band_param_set chan_band_param[1]; +} __packed; + +struct mwifiex_ie_types_rates_param_set { + struct mwifiex_ie_types_header header; + u8 rates[1]; +} __packed; + +struct mwifiex_ie_types_ssid_param_set { + struct mwifiex_ie_types_header header; + u8 ssid[1]; +} __packed; + +struct mwifiex_ie_types_num_probes { + struct mwifiex_ie_types_header header; + __le16 num_probes; +} __packed; + +struct mwifiex_ie_types_wildcard_ssid_params { + struct mwifiex_ie_types_header header; + u8 max_ssid_length; + u8 ssid[1]; +} __packed; + +#define TSF_DATA_SIZE 8 +struct mwifiex_ie_types_tsf_timestamp { + struct mwifiex_ie_types_header header; + u8 tsf_data[1]; +} __packed; + +struct mwifiex_cf_param_set { + u8 cfp_cnt; + u8 cfp_period; + u16 cfp_max_duration; + u16 cfp_duration_remaining; +} __packed; + +struct mwifiex_ibss_param_set { + u16 atim_window; +} __packed; + +struct mwifiex_ie_types_ss_param_set { + struct mwifiex_ie_types_header header; + union { + struct mwifiex_cf_param_set cf_param_set[1]; + struct mwifiex_ibss_param_set ibss_param_set[1]; + } cf_ibss; +} __packed; + +struct mwifiex_fh_param_set { + u16 dwell_time; + u8 hop_set; + u8 hop_pattern; + u8 hop_index; +} __packed; + +struct mwifiex_ds_param_set { + u8 current_chan; +} __packed; + +struct mwifiex_ie_types_phy_param_set { + struct mwifiex_ie_types_header header; + union { + struct mwifiex_fh_param_set fh_param_set[1]; + struct mwifiex_ds_param_set ds_param_set[1]; + } fh_ds; +} __packed; + +struct mwifiex_ie_types_auth_type { + struct mwifiex_ie_types_header header; + __le16 auth_type; +} __packed; + +struct mwifiex_ie_types_vendor_param_set { + struct mwifiex_ie_types_header header; + u8 ie[MWIFIEX_MAX_VSIE_LEN]; +}; + +struct mwifiex_ie_types_rsn_param_set { + struct mwifiex_ie_types_header header; + u8 rsn_ie[1]; +} __packed; + +#define KEYPARAMSET_FIXED_LEN 6 + +struct mwifiex_ie_type_key_param_set { + __le16 type; + __le16 length; + __le16 key_type_id; + __le16 key_info; + __le16 key_len; + u8 key[50]; +} __packed; + +struct host_cmd_ds_802_11_key_material { + __le16 action; + struct mwifiex_ie_type_key_param_set key_param_set; +} __packed; + +struct host_cmd_ds_gen { + u16 command; + u16 size; + u16 seq_num; + u16 result; +}; + +#define S_DS_GEN sizeof(struct host_cmd_ds_gen) + +enum sleep_resp_ctrl { + RESP_NOT_NEEDED = 0, + RESP_NEEDED, +}; + +struct mwifiex_ps_param { + __le16 null_pkt_interval; + __le16 multiple_dtims; + __le16 bcn_miss_timeout; + __le16 local_listen_interval; + __le16 adhoc_wake_period; + __le16 mode; + __le16 delay_to_ps; +}; + +#define BITMAP_AUTO_DS 0x01 +#define BITMAP_STA_PS 0x10 + +struct mwifiex_ie_types_auto_ds_param { + struct mwifiex_ie_types_header header; + __le16 deep_sleep_timeout; +} __packed; + +struct mwifiex_ie_types_ps_param { + struct mwifiex_ie_types_header header; + struct mwifiex_ps_param param; +} __packed; + +struct host_cmd_ds_802_11_ps_mode_enh { + __le16 action; + + union { + struct mwifiex_ps_param opt_ps; + __le16 ps_bitmap; + } params; +} __packed; + +struct host_cmd_ds_get_hw_spec { + __le16 hw_if_version; + __le16 version; + __le16 reserved; + __le16 num_of_mcast_adr; + u8 permanent_addr[ETH_ALEN]; + __le16 region_code; + __le16 number_of_antenna; + __le32 fw_release_number; + __le32 reserved_1; + __le32 reserved_2; + __le32 reserved_3; + __le32 fw_cap_info; + __le32 dot_11n_dev_cap; + u8 dev_mcs_support; + __le16 mp_end_port; /* SDIO only, reserved for other interfacces */ + __le16 reserved_4; +} __packed; + +struct host_cmd_ds_802_11_rssi_info { + __le16 action; + __le16 ndata; + __le16 nbcn; + __le16 reserved[9]; + long long reserved_1; +}; + +struct host_cmd_ds_802_11_rssi_info_rsp { + __le16 action; + __le16 ndata; + __le16 nbcn; + __le16 data_rssi_last; + __le16 data_nf_last; + __le16 data_rssi_avg; + __le16 data_nf_avg; + __le16 bcn_rssi_last; + __le16 bcn_nf_last; + __le16 bcn_rssi_avg; + __le16 bcn_nf_avg; + long long tsf_bcn; +}; + +struct host_cmd_ds_802_11_mac_address { + __le16 action; + u8 mac_addr[ETH_ALEN]; +}; + +struct host_cmd_ds_mac_control { + __le16 action; + __le16 reserved; +}; + +struct host_cmd_ds_mac_multicast_adr { + __le16 action; + __le16 num_of_adrs; + u8 mac_list[MWIFIEX_MAX_MULTICAST_LIST_SIZE][ETH_ALEN]; +} __packed; + +struct host_cmd_ds_802_11_deauthenticate { + u8 mac_addr[ETH_ALEN]; + __le16 reason_code; +} __packed; + +struct host_cmd_ds_802_11_associate { + u8 peer_sta_addr[ETH_ALEN]; + __le16 cap_info_bitmap; + __le16 listen_interval; + __le16 beacon_period; + u8 dtim_period; +} __packed; + +struct ieee_types_assoc_rsp { + __le16 cap_info_bitmap; + __le16 status_code; + __le16 a_id; + u8 ie_buffer[1]; +} __packed; + +struct host_cmd_ds_802_11_associate_rsp { + struct ieee_types_assoc_rsp assoc_rsp; +} __packed; + +struct ieee_types_cf_param_set { + u8 element_id; + u8 len; + u8 cfp_cnt; + u8 cfp_period; + u16 cfp_max_duration; + u16 cfp_duration_remaining; +} __packed; + +struct ieee_types_ibss_param_set { + u8 element_id; + u8 len; + __le16 atim_window; +} __packed; + +union ieee_types_ss_param_set { + struct ieee_types_cf_param_set cf_param_set; + struct ieee_types_ibss_param_set ibss_param_set; +} __packed; + +struct ieee_types_fh_param_set { + u8 element_id; + u8 len; + __le16 dwell_time; + u8 hop_set; + u8 hop_pattern; + u8 hop_index; +} __packed; + +struct ieee_types_ds_param_set { + u8 element_id; + u8 len; + u8 current_chan; +} __packed; + +union ieee_types_phy_param_set { + struct ieee_types_fh_param_set fh_param_set; + struct ieee_types_ds_param_set ds_param_set; +} __packed; + +struct host_cmd_ds_802_11_ad_hoc_start { + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 bss_mode; + __le16 beacon_period; + u8 dtim_period; + union ieee_types_ss_param_set ss_param_set; + union ieee_types_phy_param_set phy_param_set; + u16 reserved1; + __le16 cap_info_bitmap; + u8 DataRate[HOSTCMD_SUPPORTED_RATES]; +} __packed; + +struct host_cmd_ds_802_11_ad_hoc_result { + u8 pad[3]; + u8 bssid[ETH_ALEN]; +} __packed; + +struct adhoc_bss_desc { + u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 bss_mode; + __le16 beacon_period; + u8 dtim_period; + u8 time_stamp[8]; + u8 local_time[8]; + union ieee_types_phy_param_set phy_param_set; + union ieee_types_ss_param_set ss_param_set; + __le16 cap_info_bitmap; + u8 data_rates[HOSTCMD_SUPPORTED_RATES]; + + /* + * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. + * It is used in the Adhoc join command and will cause a + * binary layout mismatch with the firmware + */ +} __packed; + +struct host_cmd_ds_802_11_ad_hoc_join { + struct adhoc_bss_desc bss_descriptor; + u16 reserved1; + u16 reserved2; +} __packed; + +struct host_cmd_ds_802_11_get_log { + __le32 mcast_tx_frame; + __le32 failed; + __le32 retry; + __le32 multi_retry; + __le32 frame_dup; + __le32 rts_success; + __le32 rts_failure; + __le32 ack_failure; + __le32 rx_frag; + __le32 mcast_rx_frame; + __le32 fcs_error; + __le32 tx_frame; + __le32 reserved; + __le32 wep_icv_err_cnt[4]; +}; + +struct host_cmd_ds_tx_rate_query { + u8 tx_rate; + /* Ht Info [Bit 0] RxRate format: LG=0, HT=1 + * [Bit 1] HT Bandwidth: BW20 = 0, BW40 = 1 + * [Bit 2] HT Guard Interval: LGI = 0, SGI = 1 */ + u8 ht_info; +} __packed; + +enum Host_Sleep_Action { + HS_CONFIGURE = 0x0001, + HS_ACTIVATE = 0x0002, +}; + +struct mwifiex_hs_config_param { + __le32 conditions; + u8 gpio; + u8 gap; +} __packed; + +struct hs_activate_param { + u16 resp_ctrl; +} __packed; + +struct host_cmd_ds_802_11_hs_cfg_enh { + __le16 action; + + union { + struct mwifiex_hs_config_param hs_config; + struct hs_activate_param hs_activate; + } params; +} __packed; + +enum SNMP_MIB_INDEX { + OP_RATE_SET_I = 1, + DTIM_PERIOD_I = 3, + RTS_THRESH_I = 5, + SHORT_RETRY_LIM_I = 6, + LONG_RETRY_LIM_I = 7, + FRAG_THRESH_I = 8, + DOT11D_I = 9, +}; + +#define MAX_SNMP_BUF_SIZE 128 + +struct host_cmd_ds_802_11_snmp_mib { + __le16 query_type; + __le16 oid; + __le16 buf_size; + u8 value[1]; +} __packed; + +struct mwifiex_rate_scope { + __le16 type; + __le16 length; + __le16 hr_dsss_rate_bitmap; + __le16 ofdm_rate_bitmap; + __le16 ht_mcs_rate_bitmap[8]; +} __packed; + +struct mwifiex_rate_drop_pattern { + __le16 type; + __le16 length; + __le32 rate_drop_mode; +} __packed; + +struct host_cmd_ds_tx_rate_cfg { + __le16 action; + __le16 cfg_index; +} __packed; + +struct mwifiex_power_group { + u8 modulation_class; + u8 first_rate_code; + u8 last_rate_code; + s8 power_step; + s8 power_min; + s8 power_max; + u8 ht_bandwidth; + u8 reserved; +} __packed; + +struct mwifiex_types_power_group { + u16 type; + u16 length; +} __packed; + +struct host_cmd_ds_txpwr_cfg { + __le16 action; + __le16 cfg_index; + __le32 mode; +} __packed; + +#define MWIFIEX_USER_SCAN_CHAN_MAX 50 + +#define MWIFIEX_MAX_SSID_LIST_LENGTH 10 + +struct mwifiex_scan_cmd_config { + /* + * BSS Type to be sent in the firmware command + * + * Field can be used to restrict the types of networks returned in the + * scan. Valid settings are: + * + * - MWIFIEX_SCAN_MODE_BSS (infrastructure) + * - MWIFIEX_SCAN_MODE_IBSS (adhoc) + * - MWIFIEX_SCAN_MODE_ANY (unrestricted, adhoc and infrastructure) + */ + u8 bss_mode; + + /* Specific BSSID used to filter scan results in the firmware */ + u8 specific_bssid[ETH_ALEN]; + + /* Length of TLVs sent in command starting at tlvBuffer */ + u32 tlv_buf_len; + + /* + * SSID TLV(s) and ChanList TLVs to be sent in the firmware command + * + * TLV_TYPE_CHANLIST, mwifiex_ie_types_chan_list_param_set + * WLAN_EID_SSID, mwifiex_ie_types_ssid_param_set + */ + u8 tlv_buf[1]; /* SSID TLV(s) and ChanList TLVs are stored + here */ +} __packed; + +struct mwifiex_user_scan_chan { + u8 chan_number; + u8 radio_type; + u8 scan_type; + u8 reserved; + u32 scan_time; +} __packed; + +struct mwifiex_user_scan_ssid { + u8 ssid[IEEE80211_MAX_SSID_LEN + 1]; + u8 max_len; +} __packed; + +struct mwifiex_user_scan_cfg { + /* + * Flag set to keep the previous scan table intact + * + * If set, the scan results will accumulate, replacing any previous + * matched entries for a BSS with the new scan data + */ + u8 keep_previous_scan; + /* + * BSS mode to be sent in the firmware command + * + * Field can be used to restrict the types of networks returned in the + * scan. Valid settings are: + * + * - MWIFIEX_SCAN_MODE_BSS (infrastructure) + * - MWIFIEX_SCAN_MODE_IBSS (adhoc) + * - MWIFIEX_SCAN_MODE_ANY (unrestricted, adhoc and infrastructure) + */ + u8 bss_mode; + /* Configure the number of probe requests for active chan scans */ + u8 num_probes; + u8 reserved; + /* BSSID filter sent in the firmware command to limit the results */ + u8 specific_bssid[ETH_ALEN]; + /* SSID filter list used in the to limit the scan results */ + struct mwifiex_user_scan_ssid ssid_list[MWIFIEX_MAX_SSID_LIST_LENGTH]; + /* Variable number (fixed maximum) of channels to scan up */ + struct mwifiex_user_scan_chan chan_list[MWIFIEX_USER_SCAN_CHAN_MAX]; +} __packed; + +struct ie_body { + u8 grp_key_oui[4]; + u8 ptk_cnt[2]; + u8 ptk_body[4]; +} __packed; + +struct host_cmd_ds_802_11_scan { + u8 bss_mode; + u8 bssid[ETH_ALEN]; + u8 tlv_buffer[1]; +} __packed; + +struct host_cmd_ds_802_11_scan_rsp { + __le16 bss_descript_size; + u8 number_of_sets; + u8 bss_desc_and_tlv_buffer[1]; +} __packed; + +struct host_cmd_ds_802_11_bg_scan_query { + u8 flush; +} __packed; + +struct host_cmd_ds_802_11_bg_scan_query_rsp { + u32 report_condition; + struct host_cmd_ds_802_11_scan_rsp scan_resp; +} __packed; + +struct mwifiex_ietypes_domain_param_set { + struct mwifiex_ie_types_header header; + u8 country_code[IEEE80211_COUNTRY_STRING_LEN]; + struct ieee80211_country_ie_triplet triplet[1]; +} __packed; + +struct host_cmd_ds_802_11d_domain_info { + __le16 action; + struct mwifiex_ietypes_domain_param_set domain; +} __packed; + +struct host_cmd_ds_802_11d_domain_info_rsp { + __le16 action; + struct mwifiex_ietypes_domain_param_set domain; +} __packed; + +struct host_cmd_ds_11n_addba_req { + u8 add_req_result; + u8 peer_mac_addr[ETH_ALEN]; + u8 dialog_token; + __le16 block_ack_param_set; + __le16 block_ack_tmo; + __le16 ssn; +} __packed; + +struct host_cmd_ds_11n_addba_rsp { + u8 add_rsp_result; + u8 peer_mac_addr[ETH_ALEN]; + u8 dialog_token; + __le16 status_code; + __le16 block_ack_param_set; + __le16 block_ack_tmo; + __le16 ssn; +} __packed; + +struct host_cmd_ds_11n_delba { + u8 del_result; + u8 peer_mac_addr[ETH_ALEN]; + __le16 del_ba_param_set; + __le16 reason_code; + u8 reserved; +} __packed; + +struct host_cmd_ds_11n_batimeout { + u8 tid; + u8 peer_mac_addr[ETH_ALEN]; + u8 origninator; +} __packed; + +struct host_cmd_ds_11n_cfg { + __le16 action; + __le16 ht_tx_cap; + __le16 ht_tx_info; +} __packed; + +struct host_cmd_ds_txbuf_cfg { + __le16 action; + __le16 buff_size; + __le16 mp_end_port; /* SDIO only, reserved for other interfacces */ + __le16 reserved3; +} __packed; + +struct host_cmd_ds_amsdu_aggr_ctrl { + __le16 action; + __le16 enable; + __le16 curr_buf_size; +} __packed; + +struct mwifiex_ie_types_wmm_param_set { + struct mwifiex_ie_types_header header; + u8 wmm_ie[1]; +}; + +struct mwifiex_ie_types_wmm_queue_status { + struct mwifiex_ie_types_header header; + u8 queue_index; + u8 disabled; + u16 medium_time; + u8 flow_required; + u8 flow_created; + u32 reserved; +}; + +struct ieee_types_vendor_header { + u8 element_id; + u8 len; + u8 oui[3]; + u8 oui_type; + u8 oui_subtype; + u8 version; +} __packed; + +struct ieee_types_wmm_ac_parameters { + u8 aci_aifsn_bitmap; + u8 ecw_bitmap; + __le16 tx_op_limit; +} __packed; + +struct ieee_types_wmm_parameter { + /* + * WMM Parameter IE - Vendor Specific Header: + * element_id [221/0xdd] + * Len [24] + * Oui [00:50:f2] + * OuiType [2] + * OuiSubType [1] + * Version [1] + */ + struct ieee_types_vendor_header vend_hdr; + u8 qos_info_bitmap; + u8 reserved; + struct ieee_types_wmm_ac_parameters ac_params[IEEE80211_MAX_QUEUES]; +} __packed; + +struct ieee_types_wmm_info { + + /* + * WMM Info IE - Vendor Specific Header: + * element_id [221/0xdd] + * Len [7] + * Oui [00:50:f2] + * OuiType [2] + * OuiSubType [0] + * Version [1] + */ + struct ieee_types_vendor_header vend_hdr; + + u8 qos_info_bitmap; +} __packed; + +struct host_cmd_ds_wmm_get_status { + u8 queue_status_tlv[sizeof(struct mwifiex_ie_types_wmm_queue_status) * + IEEE80211_MAX_QUEUES]; + u8 wmm_param_tlv[sizeof(struct ieee_types_wmm_parameter) + 2]; +} __packed; + +struct mwifiex_wmm_ac_status { + u8 disabled; + u8 flow_required; + u8 flow_created; +}; + +struct mwifiex_ie_types_htcap { + struct mwifiex_ie_types_header header; + struct ieee80211_ht_cap ht_cap; +} __packed; + +struct mwifiex_ie_types_htinfo { + struct mwifiex_ie_types_header header; + struct ieee80211_ht_info ht_info; +} __packed; + +struct mwifiex_ie_types_2040bssco { + struct mwifiex_ie_types_header header; + u8 bss_co_2040; +} __packed; + +struct mwifiex_ie_types_extcap { + struct mwifiex_ie_types_header header; + u8 ext_cap; +} __packed; + +struct host_cmd_ds_mac_reg_access { + __le16 action; + __le16 offset; + __le32 value; +} __packed; + +struct host_cmd_ds_bbp_reg_access { + __le16 action; + __le16 offset; + u8 value; + u8 reserved[3]; +} __packed; + +struct host_cmd_ds_rf_reg_access { + __le16 action; + __le16 offset; + u8 value; + u8 reserved[3]; +} __packed; + +struct host_cmd_ds_pmic_reg_access { + __le16 action; + __le16 offset; + u8 value; + u8 reserved[3]; +} __packed; + +struct host_cmd_ds_802_11_eeprom_access { + __le16 action; + + __le16 offset; + __le16 byte_count; + u8 value; +} __packed; + +struct host_cmd_ds_802_11_rf_channel { + __le16 action; + __le16 current_channel; + __le16 rf_type; + __le16 reserved; + u8 reserved_1[32]; +} __packed; + +struct host_cmd_ds_version_ext { + u8 version_str_sel; + char version_str[128]; +} __packed; + +struct host_cmd_ds_802_11_ibss_status { + __le16 action; + __le16 enable; + u8 bssid[ETH_ALEN]; + __le16 beacon_interval; + __le16 atim_window; + __le16 use_g_rate_protect; +} __packed; + +#define CONNECTION_TYPE_INFRA 0 +#define CONNECTION_TYPE_ADHOC 1 + +struct host_cmd_ds_set_bss_mode { + u8 con_type; +} __packed; + +struct host_cmd_ds_command { + __le16 command; + __le16 size; + __le16 seq_num; + __le16 result; + union { + struct host_cmd_ds_get_hw_spec hw_spec; + struct host_cmd_ds_mac_control mac_ctrl; + struct host_cmd_ds_802_11_mac_address mac_addr; + struct host_cmd_ds_mac_multicast_adr mc_addr; + struct host_cmd_ds_802_11_get_log get_log; + struct host_cmd_ds_802_11_rssi_info rssi_info; + struct host_cmd_ds_802_11_rssi_info_rsp rssi_info_rsp; + struct host_cmd_ds_802_11_snmp_mib smib; + struct host_cmd_ds_802_11_rf_channel rf_channel; + struct host_cmd_ds_tx_rate_query tx_rate; + struct host_cmd_ds_tx_rate_cfg tx_rate_cfg; + struct host_cmd_ds_txpwr_cfg txp_cfg; + struct host_cmd_ds_802_11_ps_mode_enh psmode_enh; + struct host_cmd_ds_802_11_hs_cfg_enh opt_hs_cfg; + struct host_cmd_ds_802_11_scan scan; + struct host_cmd_ds_802_11_scan_rsp scan_resp; + struct host_cmd_ds_802_11_bg_scan_query bg_scan_query; + struct host_cmd_ds_802_11_bg_scan_query_rsp bg_scan_query_resp; + struct host_cmd_ds_802_11_associate associate; + struct host_cmd_ds_802_11_associate_rsp associate_rsp; + struct host_cmd_ds_802_11_deauthenticate deauth; + struct host_cmd_ds_802_11_ad_hoc_start adhoc_start; + struct host_cmd_ds_802_11_ad_hoc_result adhoc_result; + struct host_cmd_ds_802_11_ad_hoc_join adhoc_join; + struct host_cmd_ds_802_11d_domain_info domain_info; + struct host_cmd_ds_802_11d_domain_info_rsp domain_info_resp; + struct host_cmd_ds_11n_addba_req add_ba_req; + struct host_cmd_ds_11n_addba_rsp add_ba_rsp; + struct host_cmd_ds_11n_delba del_ba; + struct host_cmd_ds_txbuf_cfg tx_buf; + struct host_cmd_ds_amsdu_aggr_ctrl amsdu_aggr_ctrl; + struct host_cmd_ds_11n_cfg htcfg; + struct host_cmd_ds_wmm_get_status get_wmm_status; + struct host_cmd_ds_802_11_key_material key_material; + struct host_cmd_ds_version_ext verext; + struct host_cmd_ds_802_11_ibss_status ibss_coalescing; + struct host_cmd_ds_mac_reg_access mac_reg; + struct host_cmd_ds_bbp_reg_access bbp_reg; + struct host_cmd_ds_rf_reg_access rf_reg; + struct host_cmd_ds_pmic_reg_access pmic_reg; + struct host_cmd_ds_set_bss_mode bss_mode; + struct host_cmd_ds_802_11_eeprom_access eeprom; + } params; +} __packed; + +struct mwifiex_opt_sleep_confirm { + __le16 command; + __le16 size; + __le16 seq_num; + __le16 result; + __le16 action; + __le16 resp_ctrl; +} __packed; + +struct mwifiex_opt_sleep_confirm_buffer { + u8 hdr[4]; + struct mwifiex_opt_sleep_confirm ps_cfm_sleep; +} __packed; +#endif /* !_MWIFIEX_FW_H_ */ diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c new file mode 100644 index 000000000000..8189862da1f9 --- /dev/null +++ b/drivers/net/wireless/mwifiex/init.c @@ -0,0 +1,662 @@ +/* + * Marvell Wireless LAN device driver: HW/FW Initialization + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +/* + * This function adds a BSS priority table to the table list. + * + * The function allocates a new BSS priority table node and adds it to + * the end of BSS priority table list, kept in driver memory. + */ +static int mwifiex_add_bss_prio_tbl(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_bss_prio_node *bss_prio; + int status = 0; + unsigned long flags; + + bss_prio = kzalloc(sizeof(struct mwifiex_bss_prio_node), GFP_KERNEL); + if (!bss_prio) { + dev_err(adapter->dev, "%s: failed to alloc bss_prio\n", + __func__); + return -1; + } + + bss_prio->priv = priv; + INIT_LIST_HEAD(&bss_prio->list); + if (!adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur) + adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur = + bss_prio; + + spin_lock_irqsave(&adapter->bss_prio_tbl[priv->bss_priority] + .bss_prio_lock, flags); + list_add_tail(&bss_prio->list, + &adapter->bss_prio_tbl[priv->bss_priority] + .bss_prio_head); + spin_unlock_irqrestore(&adapter->bss_prio_tbl[priv->bss_priority] + .bss_prio_lock, flags); + + return status; +} + +/* + * This function initializes the private structure and sets default + * values to the members. + * + * Additionally, it also initializes all the locks and sets up all the + * lists. + */ +static int mwifiex_init_priv(struct mwifiex_private *priv) +{ + u32 i; + int ret = 0; + + priv->media_connected = false; + memset(priv->curr_addr, 0xff, ETH_ALEN); + + priv->pkt_tx_ctrl = 0; + priv->bss_mode = NL80211_IFTYPE_STATION; + priv->data_rate = 0; /* Initially indicate the rate as auto */ + priv->is_data_rate_auto = true; + priv->bcn_avg_factor = DEFAULT_BCN_AVG_FACTOR; + priv->data_avg_factor = DEFAULT_DATA_AVG_FACTOR; + + priv->sec_info.wep_status = MWIFIEX_802_11_WEP_DISABLED; + priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM; + priv->sec_info.encryption_mode = 0; + for (i = 0; i < ARRAY_SIZE(priv->wep_key); i++) + memset(&priv->wep_key[i], 0, sizeof(struct mwifiex_wep_key)); + priv->wep_key_curr_index = 0; + priv->curr_pkt_filter = HostCmd_ACT_MAC_RX_ON | HostCmd_ACT_MAC_TX_ON | + HostCmd_ACT_MAC_ETHERNETII_ENABLE; + + priv->beacon_period = 100; /* beacon interval */ ; + priv->attempted_bss_desc = NULL; + memset(&priv->curr_bss_params, 0, sizeof(priv->curr_bss_params)); + priv->listen_interval = MWIFIEX_DEFAULT_LISTEN_INTERVAL; + + memset(&priv->prev_ssid, 0, sizeof(priv->prev_ssid)); + memset(&priv->prev_bssid, 0, sizeof(priv->prev_bssid)); + memset(&priv->assoc_rsp_buf, 0, sizeof(priv->assoc_rsp_buf)); + priv->assoc_rsp_size = 0; + priv->adhoc_channel = DEFAULT_AD_HOC_CHANNEL; + priv->atim_window = 0; + priv->adhoc_state = ADHOC_IDLE; + priv->tx_power_level = 0; + priv->max_tx_power_level = 0; + priv->min_tx_power_level = 0; + priv->tx_rate = 0; + priv->rxpd_htinfo = 0; + priv->rxpd_rate = 0; + priv->rate_bitmap = 0; + priv->data_rssi_last = 0; + priv->data_rssi_avg = 0; + priv->data_nf_avg = 0; + priv->data_nf_last = 0; + priv->bcn_rssi_last = 0; + priv->bcn_rssi_avg = 0; + priv->bcn_nf_avg = 0; + priv->bcn_nf_last = 0; + memset(&priv->wpa_ie, 0, sizeof(priv->wpa_ie)); + memset(&priv->aes_key, 0, sizeof(priv->aes_key)); + priv->wpa_ie_len = 0; + priv->wpa_is_gtk_set = false; + + memset(&priv->assoc_tlv_buf, 0, sizeof(priv->assoc_tlv_buf)); + priv->assoc_tlv_buf_len = 0; + memset(&priv->wps, 0, sizeof(priv->wps)); + memset(&priv->gen_ie_buf, 0, sizeof(priv->gen_ie_buf)); + priv->gen_ie_buf_len = 0; + memset(priv->vs_ie, 0, sizeof(priv->vs_ie)); + + priv->wmm_required = true; + priv->wmm_enabled = false; + priv->wmm_qosinfo = 0; + priv->curr_bcn_buf = NULL; + priv->curr_bcn_size = 0; + + priv->scan_block = false; + + ret = mwifiex_add_bss_prio_tbl(priv); + + return ret; +} + +/* + * This function allocates buffers for members of the adapter + * structure. + * + * The memory allocated includes scan table, command buffers, and + * sleep confirm command buffer. In addition, the queues are + * also initialized. + */ +static int mwifiex_allocate_adapter(struct mwifiex_adapter *adapter) +{ + int ret = 0; + u32 buf_size; + struct mwifiex_bssdescriptor *temp_scan_table; + + /* Allocate buffer to store the BSSID list */ + buf_size = sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP; + temp_scan_table = kzalloc(buf_size, GFP_KERNEL); + if (!temp_scan_table) { + dev_err(adapter->dev, "%s: failed to alloc temp_scan_table\n", + __func__); + return -1; + } + + adapter->scan_table = temp_scan_table; + + /* Allocate command buffer */ + ret = mwifiex_alloc_cmd_buffer(adapter); + if (ret) { + dev_err(adapter->dev, "%s: failed to alloc cmd buffer\n", + __func__); + return -1; + } + + adapter->sleep_cfm = + dev_alloc_skb(sizeof(struct mwifiex_opt_sleep_confirm_buffer) + + INTF_HEADER_LEN); + + if (!adapter->sleep_cfm) { + dev_err(adapter->dev, "%s: failed to alloc sleep cfm" + " cmd buffer\n", __func__); + return -1; + } + skb_reserve(adapter->sleep_cfm, INTF_HEADER_LEN); + + return 0; +} + +/* + * This function initializes the adapter structure and sets default + * values to the members of adapter. + * + * This also initializes the WMM related parameters in the driver private + * structures. + */ +static void mwifiex_init_adapter(struct mwifiex_adapter *adapter) +{ + struct mwifiex_opt_sleep_confirm_buffer *sleep_cfm_buf = NULL; + + skb_put(adapter->sleep_cfm, sizeof(sleep_cfm_buf->ps_cfm_sleep)); + sleep_cfm_buf = (struct mwifiex_opt_sleep_confirm_buffer *) + (adapter->sleep_cfm->data); + + adapter->cmd_sent = false; + adapter->data_sent = true; + adapter->cmd_resp_received = false; + adapter->event_received = false; + adapter->data_received = false; + + adapter->surprise_removed = false; + + adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; + + adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM; + adapter->ps_state = PS_STATE_AWAKE; + adapter->need_to_wakeup = false; + + adapter->scan_mode = HostCmd_BSS_MODE_ANY; + adapter->specific_scan_time = MWIFIEX_SPECIFIC_SCAN_CHAN_TIME; + adapter->active_scan_time = MWIFIEX_ACTIVE_SCAN_CHAN_TIME; + adapter->passive_scan_time = MWIFIEX_PASSIVE_SCAN_CHAN_TIME; + + adapter->num_in_scan_table = 0; + memset(adapter->scan_table, 0, + (sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP)); + adapter->scan_probes = 1; + + memset(adapter->bcn_buf, 0, sizeof(adapter->bcn_buf)); + adapter->bcn_buf_end = adapter->bcn_buf; + + adapter->multiple_dtim = 1; + + adapter->local_listen_interval = 0; /* default value in firmware + will be used */ + + adapter->is_deep_sleep = false; + + adapter->delay_null_pkt = false; + adapter->delay_to_ps = 1000; + adapter->enhanced_ps_mode = PS_MODE_AUTO; + + adapter->gen_null_pkt = false; /* Disable NULL Pkg generation by + default */ + adapter->pps_uapsd_mode = false; /* Disable pps/uapsd mode by + default */ + adapter->pm_wakeup_card_req = false; + + adapter->pm_wakeup_fw_try = false; + + adapter->max_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; + adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; + adapter->curr_tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; + + adapter->is_hs_configured = false; + adapter->hs_cfg.conditions = cpu_to_le32(HOST_SLEEP_CFG_COND_DEF); + adapter->hs_cfg.gpio = HOST_SLEEP_CFG_GPIO_DEF; + adapter->hs_cfg.gap = HOST_SLEEP_CFG_GAP_DEF; + adapter->hs_activated = false; + + memset(adapter->event_body, 0, sizeof(adapter->event_body)); + adapter->hw_dot_11n_dev_cap = 0; + adapter->hw_dev_mcs_support = 0; + adapter->chan_offset = 0; + adapter->adhoc_11n_enabled = false; + + mwifiex_wmm_init(adapter); + + if (adapter->sleep_cfm) { + memset(&sleep_cfm_buf->ps_cfm_sleep, 0, + adapter->sleep_cfm->len); + sleep_cfm_buf->ps_cfm_sleep.command = + cpu_to_le16(HostCmd_CMD_802_11_PS_MODE_ENH); + sleep_cfm_buf->ps_cfm_sleep.size = + cpu_to_le16(adapter->sleep_cfm->len); + sleep_cfm_buf->ps_cfm_sleep.result = 0; + sleep_cfm_buf->ps_cfm_sleep.action = cpu_to_le16(SLEEP_CONFIRM); + sleep_cfm_buf->ps_cfm_sleep.resp_ctrl = + cpu_to_le16(RESP_NEEDED); + } + memset(&adapter->sleep_params, 0, sizeof(adapter->sleep_params)); + memset(&adapter->sleep_period, 0, sizeof(adapter->sleep_period)); + adapter->tx_lock_flag = false; + adapter->null_pkt_interval = 0; + adapter->fw_bands = 0; + adapter->config_bands = 0; + adapter->adhoc_start_band = 0; + adapter->scan_channels = NULL; + adapter->fw_release_number = 0; + adapter->fw_cap_info = 0; + memset(&adapter->upld_buf, 0, sizeof(adapter->upld_buf)); + adapter->event_cause = 0; + adapter->region_code = 0; + adapter->bcn_miss_time_out = DEFAULT_BCN_MISS_TIMEOUT; + adapter->adhoc_awake_period = 0; + memset(&adapter->arp_filter, 0, sizeof(adapter->arp_filter)); + adapter->arp_filter_size = 0; + + return; +} + +/* + * This function frees the adapter structure. + * + * The freeing operation is done recursively, by canceling all + * pending commands, freeing the member buffers previously + * allocated (command buffers, scan table buffer, sleep confirm + * command buffer), stopping the timers and calling the cleanup + * routines for every interface, before the actual adapter + * structure is freed. + */ +static void +mwifiex_free_adapter(struct mwifiex_adapter *adapter) +{ + if (!adapter) { + pr_err("%s: adapter is NULL\n", __func__); + return; + } + + mwifiex_cancel_all_pending_cmd(adapter); + + /* Free lock variables */ + mwifiex_free_lock_list(adapter); + + /* Free command buffer */ + dev_dbg(adapter->dev, "info: free cmd buffer\n"); + mwifiex_free_cmd_buffer(adapter); + + del_timer(&adapter->cmd_timer); + + dev_dbg(adapter->dev, "info: free scan table\n"); + kfree(adapter->scan_table); + adapter->scan_table = NULL; + + adapter->if_ops.cleanup_if(adapter); + + dev_kfree_skb_any(adapter->sleep_cfm); + + return; +} + +/* + * This function intializes the lock variables and + * the list heads. + */ +int mwifiex_init_lock_list(struct mwifiex_adapter *adapter) +{ + struct mwifiex_private *priv = NULL; + s32 i = 0; + u32 j = 0; + + spin_lock_init(&adapter->mwifiex_lock); + spin_lock_init(&adapter->int_lock); + spin_lock_init(&adapter->main_proc_lock); + spin_lock_init(&adapter->mwifiex_cmd_lock); + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + priv = adapter->priv[i]; + spin_lock_init(&priv->rx_pkt_lock); + spin_lock_init(&priv->wmm.ra_list_spinlock); + spin_lock_init(&priv->curr_bcn_buf_lock); + } + } + + /* Initialize cmd_free_q */ + INIT_LIST_HEAD(&adapter->cmd_free_q); + /* Initialize cmd_pending_q */ + INIT_LIST_HEAD(&adapter->cmd_pending_q); + /* Initialize scan_pending_q */ + INIT_LIST_HEAD(&adapter->scan_pending_q); + + spin_lock_init(&adapter->cmd_free_q_lock); + spin_lock_init(&adapter->cmd_pending_q_lock); + spin_lock_init(&adapter->scan_pending_q_lock); + + for (i = 0; i < adapter->priv_num; ++i) { + INIT_LIST_HEAD(&adapter->bss_prio_tbl[i].bss_prio_head); + adapter->bss_prio_tbl[i].bss_prio_cur = NULL; + spin_lock_init(&adapter->bss_prio_tbl[i].bss_prio_lock); + } + + for (i = 0; i < adapter->priv_num; i++) { + if (!adapter->priv[i]) + continue; + priv = adapter->priv[i]; + for (j = 0; j < MAX_NUM_TID; ++j) { + INIT_LIST_HEAD(&priv->wmm.tid_tbl_ptr[j].ra_list); + spin_lock_init(&priv->wmm.tid_tbl_ptr[j].tid_tbl_lock); + } + INIT_LIST_HEAD(&priv->tx_ba_stream_tbl_ptr); + INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr); + + spin_lock_init(&priv->tx_ba_stream_tbl_lock); + spin_lock_init(&priv->rx_reorder_tbl_lock); + } + + return 0; +} + +/* + * This function releases the lock variables and frees the locks and + * associated locks. + */ +void mwifiex_free_lock_list(struct mwifiex_adapter *adapter) +{ + struct mwifiex_private *priv = NULL; + s32 i = 0; + s32 j = 0; + + /* Free lists */ + list_del(&adapter->cmd_free_q); + list_del(&adapter->cmd_pending_q); + list_del(&adapter->scan_pending_q); + + for (i = 0; i < adapter->priv_num; i++) + list_del(&adapter->bss_prio_tbl[i].bss_prio_head); + + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + priv = adapter->priv[i]; + for (j = 0; j < MAX_NUM_TID; ++j) + list_del(&priv->wmm.tid_tbl_ptr[j].ra_list); + list_del(&priv->tx_ba_stream_tbl_ptr); + list_del(&priv->rx_reorder_tbl_ptr); + } + } + + return; +} + +/* + * This function initializes the firmware. + * + * The following operations are performed sequentially - + * - Allocate adapter structure + * - Initialize the adapter structure + * - Initialize the private structure + * - Add BSS priority tables to the adapter structure + * - For each interface, send the init commands to firmware + * - Send the first command in command pending queue, if available + */ +int mwifiex_init_fw(struct mwifiex_adapter *adapter) +{ + int ret = 0; + struct mwifiex_private *priv = NULL; + u8 i = 0; + u8 first_sta = true; + int is_cmd_pend_q_empty; + unsigned long flags; + + adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; + + /* Allocate memory for member of adapter structure */ + ret = mwifiex_allocate_adapter(adapter); + if (ret) + return -1; + + /* Initialize adapter structure */ + mwifiex_init_adapter(adapter); + + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + priv = adapter->priv[i]; + + /* Initialize private structure */ + ret = mwifiex_init_priv(priv); + if (ret) + return -1; + } + } + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta); + if (ret == -1) + return -1; + + first_sta = false; + } + } + + spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); + is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); + if (!is_cmd_pend_q_empty) { + /* Send the first command in queue and return */ + if (mwifiex_main_process(adapter) != -1) + ret = -EINPROGRESS; + } else { + adapter->hw_status = MWIFIEX_HW_STATUS_READY; + } + + return ret; +} + +/* + * This function deletes the BSS priority tables. + * + * The function traverses through all the allocated BSS priority nodes + * in every BSS priority table and frees them. + */ +static void mwifiex_delete_bss_prio_tbl(struct mwifiex_private *priv) +{ + int i; + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_bss_prio_node *bssprio_node = NULL, *tmp_node = NULL, + **cur = NULL; + struct list_head *head; + spinlock_t *lock; + unsigned long flags; + + for (i = 0; i < adapter->priv_num; ++i) { + head = &adapter->bss_prio_tbl[i].bss_prio_head; + cur = &adapter->bss_prio_tbl[i].bss_prio_cur; + lock = &adapter->bss_prio_tbl[i].bss_prio_lock; + dev_dbg(adapter->dev, "info: delete BSS priority table," + " index = %d, i = %d, head = %p, cur = %p\n", + priv->bss_index, i, head, *cur); + if (*cur) { + spin_lock_irqsave(lock, flags); + if (list_empty(head)) { + spin_unlock_irqrestore(lock, flags); + continue; + } + bssprio_node = list_first_entry(head, + struct mwifiex_bss_prio_node, list); + spin_unlock_irqrestore(lock, flags); + + list_for_each_entry_safe(bssprio_node, tmp_node, head, + list) { + if (bssprio_node->priv == priv) { + dev_dbg(adapter->dev, "info: Delete " + "node %p, next = %p\n", + bssprio_node, tmp_node); + spin_lock_irqsave(lock, flags); + list_del(&bssprio_node->list); + spin_unlock_irqrestore(lock, flags); + kfree(bssprio_node); + } + } + *cur = (struct mwifiex_bss_prio_node *)head; + } + } +} + +/* + * This function is used to shutdown the driver. + * + * The following operations are performed sequentially - + * - Check if already shut down + * - Make sure the main process has stopped + * - Clean up the Tx and Rx queues + * - Delete BSS priority tables + * - Free the adapter + * - Notify completion + */ +int +mwifiex_shutdown_drv(struct mwifiex_adapter *adapter) +{ + int ret = -EINPROGRESS; + struct mwifiex_private *priv = NULL; + s32 i = 0; + unsigned long flags; + + /* mwifiex already shutdown */ + if (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) + return 0; + + adapter->hw_status = MWIFIEX_HW_STATUS_CLOSING; + /* wait for mwifiex_process to complete */ + if (adapter->mwifiex_processing) { + dev_warn(adapter->dev, "main process is still running\n"); + return ret; + } + + /* shut down mwifiex */ + dev_dbg(adapter->dev, "info: shutdown mwifiex...\n"); + + /* Clean up Tx/Rx queues and delete BSS priority table */ + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + priv = adapter->priv[i]; + + mwifiex_clean_txrx(priv); + mwifiex_delete_bss_prio_tbl(priv); + } + } + + spin_lock_irqsave(&adapter->mwifiex_lock, flags); + + /* Free adapter structure */ + mwifiex_free_adapter(adapter); + + spin_unlock_irqrestore(&adapter->mwifiex_lock, flags); + + /* Notify completion */ + ret = mwifiex_shutdown_fw_complete(adapter); + + return ret; +} + +/* + * This function downloads the firmware to the card. + * + * The actual download is preceded by two sanity checks - + * - Check if firmware is already running + * - Check if the interface is the winner to download the firmware + * + * ...and followed by another - + * - Check if the firmware is downloaded successfully + * + * After download is successfully completed, the host interrupts are enabled. + */ +int mwifiex_dnld_fw(struct mwifiex_adapter *adapter, + struct mwifiex_fw_image *pmfw) +{ + int ret = 0; + u32 poll_num = 1; + int winner; + + /* Check if firmware is already running */ + ret = adapter->if_ops.check_fw_status(adapter, poll_num, &winner); + if (!ret) { + dev_notice(adapter->dev, + "WLAN FW already running! Skip FW download\n"); + goto done; + } + poll_num = MAX_FIRMWARE_POLL_TRIES; + + /* Check if we are the winner for downloading FW */ + if (!winner) { + dev_notice(adapter->dev, + "Other interface already running!" + " Skip FW download\n"); + poll_num = MAX_MULTI_INTERFACE_POLL_TRIES; + goto poll_fw; + } + if (pmfw) { + /* Download firmware with helper */ + ret = adapter->if_ops.prog_fw(adapter, pmfw); + if (ret) { + dev_err(adapter->dev, "prog_fw failed ret=%#x\n", ret); + return ret; + } + } + +poll_fw: + /* Check if the firmware is downloaded successfully or not */ + ret = adapter->if_ops.check_fw_status(adapter, poll_num, NULL); + if (ret) { + dev_err(adapter->dev, "FW failed to be active in time\n"); + return -1; + } +done: + /* re-enable host interrupt for mwifiex after fw dnld is successful */ + adapter->if_ops.enable_int(adapter); + return ret; +} diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h new file mode 100644 index 000000000000..703a6d12ebf3 --- /dev/null +++ b/drivers/net/wireless/mwifiex/ioctl.h @@ -0,0 +1,411 @@ +/* + * Marvell Wireless LAN device driver: ioctl data structures & APIs + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_IOCTL_H_ +#define _MWIFIEX_IOCTL_H_ + +#include <net/mac80211.h> + +enum { + MWIFIEX_SCAN_MODE_UNCHANGED = 0, + MWIFIEX_SCAN_MODE_BSS, + MWIFIEX_SCAN_MODE_IBSS, + MWIFIEX_SCAN_MODE_ANY +}; + +enum { + MWIFIEX_SCAN_TYPE_UNCHANGED = 0, + MWIFIEX_SCAN_TYPE_ACTIVE, + MWIFIEX_SCAN_TYPE_PASSIVE +}; + +struct mwifiex_get_scan_table_fixed { + u8 bssid[ETH_ALEN]; + u8 channel; + u8 rssi; + long long network_tsf; +}; + +struct mwifiex_scan_time_params { + u32 specific_scan_time; + u32 active_scan_time; + u32 passive_scan_time; +}; + +struct mwifiex_user_scan { + u32 scan_cfg_len; + u8 scan_cfg_buf[1]; +}; + +struct mwifiex_scan_req { + u32 scan_mode; + u32 scan_type; + struct mwifiex_802_11_ssid scan_ssid; + struct mwifiex_scan_time_params scan_time; + struct mwifiex_user_scan user_scan; +}; + +struct mwifiex_scan_resp { + u32 num_in_scan_table; + u8 *scan_table; +}; + +#define MWIFIEX_PROMISC_MODE 1 +#define MWIFIEX_MULTICAST_MODE 2 +#define MWIFIEX_ALL_MULTI_MODE 4 +#define MWIFIEX_MAX_MULTICAST_LIST_SIZE 32 + +struct mwifiex_multicast_list { + u32 mode; + u32 num_multicast_addr; + u8 mac_list[MWIFIEX_MAX_MULTICAST_LIST_SIZE][ETH_ALEN]; +}; + +#define MWIFIEX_MAX_CHANNEL_NUM 128 + +struct mwifiex_chan_freq { + u32 channel; + u32 freq; +}; + +struct mwifiex_chan_list { + u32 num_of_chan; + struct mwifiex_chan_freq cf[MWIFIEX_MAX_CHANNEL_NUM]; +}; + +struct mwifiex_ssid_bssid { + struct mwifiex_802_11_ssid ssid; + u8 bssid[ETH_ALEN]; +}; + +enum { + BAND_B = 1, + BAND_G = 2, + BAND_A = 4, + BAND_GN = 8, + BAND_AN = 16, +}; + +#define NO_SEC_CHANNEL 0 +#define SEC_CHANNEL_ABOVE 1 +#define SEC_CHANNEL_BELOW 3 + +struct mwifiex_ds_band_cfg { + u32 config_bands; + u32 adhoc_start_band; + u32 adhoc_channel; + u32 sec_chan_offset; +}; + +enum { + ADHOC_IDLE, + ADHOC_STARTED, + ADHOC_JOINED, + ADHOC_COALESCED +}; + +struct mwifiex_ds_get_stats { + u32 mcast_tx_frame; + u32 failed; + u32 retry; + u32 multi_retry; + u32 frame_dup; + u32 rts_success; + u32 rts_failure; + u32 ack_failure; + u32 rx_frag; + u32 mcast_rx_frame; + u32 fcs_error; + u32 tx_frame; + u32 wep_icv_error[4]; +}; + +#define BCN_RSSI_LAST_MASK 0x00000001 +#define BCN_RSSI_AVG_MASK 0x00000002 +#define DATA_RSSI_LAST_MASK 0x00000004 +#define DATA_RSSI_AVG_MASK 0x00000008 +#define BCN_SNR_LAST_MASK 0x00000010 +#define BCN_SNR_AVG_MASK 0x00000020 +#define DATA_SNR_LAST_MASK 0x00000040 +#define DATA_SNR_AVG_MASK 0x00000080 +#define BCN_NF_LAST_MASK 0x00000100 +#define BCN_NF_AVG_MASK 0x00000200 +#define DATA_NF_LAST_MASK 0x00000400 +#define DATA_NF_AVG_MASK 0x00000800 +#define ALL_RSSI_INFO_MASK 0x00000fff + +struct mwifiex_ds_get_signal { + /* + * Bit0: Last Beacon RSSI, Bit1: Average Beacon RSSI, + * Bit2: Last Data RSSI, Bit3: Average Data RSSI, + * Bit4: Last Beacon SNR, Bit5: Average Beacon SNR, + * Bit6: Last Data SNR, Bit7: Average Data SNR, + * Bit8: Last Beacon NF, Bit9: Average Beacon NF, + * Bit10: Last Data NF, Bit11: Average Data NF + */ + u16 selector; + s16 bcn_rssi_last; + s16 bcn_rssi_avg; + s16 data_rssi_last; + s16 data_rssi_avg; + s16 bcn_snr_last; + s16 bcn_snr_avg; + s16 data_snr_last; + s16 data_snr_avg; + s16 bcn_nf_last; + s16 bcn_nf_avg; + s16 data_nf_last; + s16 data_nf_avg; +}; + +struct mwifiex_fw_info { + u32 fw_ver; + u8 mac_addr[ETH_ALEN]; +}; + +#define MWIFIEX_MAX_VER_STR_LEN 128 + +struct mwifiex_ver_ext { + u32 version_str_sel; + char version_str[MWIFIEX_MAX_VER_STR_LEN]; +}; + +struct mwifiex_bss_info { + u32 bss_mode; + struct mwifiex_802_11_ssid ssid; + u32 scan_table_idx; + u32 bss_chan; + u32 region_code; + u32 media_connected; + u32 max_power_level; + u32 min_power_level; + u32 adhoc_state; + signed int bcn_nf_last; + u32 wep_status; + u32 is_hs_configured; + u32 is_deep_sleep; + u8 bssid[ETH_ALEN]; +}; + +#define MAX_NUM_TID 8 + +#define MAX_RX_WINSIZE 64 + +struct mwifiex_ds_rx_reorder_tbl { + u16 tid; + u8 ta[ETH_ALEN]; + u32 start_win; + u32 win_size; + u32 buffer[MAX_RX_WINSIZE]; +}; + +struct mwifiex_ds_tx_ba_stream_tbl { + u16 tid; + u8 ra[ETH_ALEN]; +}; + +#define DBG_CMD_NUM 5 + +struct mwifiex_debug_info { + u32 int_counter; + u32 packets_out[MAX_NUM_TID]; + u32 max_tx_buf_size; + u32 tx_buf_size; + u32 curr_tx_buf_size; + u32 tx_tbl_num; + struct mwifiex_ds_tx_ba_stream_tbl + tx_tbl[MWIFIEX_MAX_TX_BASTREAM_SUPPORTED]; + u32 rx_tbl_num; + struct mwifiex_ds_rx_reorder_tbl rx_tbl + [MWIFIEX_MAX_RX_BASTREAM_SUPPORTED]; + u16 ps_mode; + u32 ps_state; + u8 is_deep_sleep; + u8 pm_wakeup_card_req; + u32 pm_wakeup_fw_try; + u8 is_hs_configured; + u8 hs_activated; + u32 num_cmd_host_to_card_failure; + u32 num_cmd_sleep_cfm_host_to_card_failure; + u32 num_tx_host_to_card_failure; + u32 num_event_deauth; + u32 num_event_disassoc; + u32 num_event_link_lost; + u32 num_cmd_deauth; + u32 num_cmd_assoc_success; + u32 num_cmd_assoc_failure; + u32 num_tx_timeout; + u32 num_cmd_timeout; + u16 timeout_cmd_id; + u16 timeout_cmd_act; + u16 last_cmd_id[DBG_CMD_NUM]; + u16 last_cmd_act[DBG_CMD_NUM]; + u16 last_cmd_index; + u16 last_cmd_resp_id[DBG_CMD_NUM]; + u16 last_cmd_resp_index; + u16 last_event[DBG_CMD_NUM]; + u16 last_event_index; + u8 data_sent; + u8 cmd_sent; + u8 cmd_resp_received; + u8 event_received; +}; + +#define MWIFIEX_KEY_INDEX_UNICAST 0x40000000 +#define MWIFIEX_MAX_KEY_LENGTH 32 +#define WAPI_RXPN_LEN 16 + +struct mwifiex_ds_encrypt_key { + u32 key_disable; + u32 key_index; + u32 key_len; + u8 key_material[MWIFIEX_MAX_KEY_LENGTH]; + u8 mac_addr[ETH_ALEN]; + u32 is_wapi_key; + u8 wapi_rxpn[WAPI_RXPN_LEN]; +}; + +struct mwifiex_rate_cfg { + u32 action; + u32 is_rate_auto; + u32 rate; +}; + +struct mwifiex_data_rate { + u32 tx_data_rate; + u32 rx_data_rate; +}; + +struct mwifiex_power_cfg { + u32 is_power_auto; + u32 power_level; +}; + +struct mwifiex_ds_hs_cfg { + u32 is_invoke_hostcmd; + /* Bit0: non-unicast data + * Bit1: unicast data + * Bit2: mac events + * Bit3: magic packet + */ + u32 conditions; + u32 gpio; + u32 gap; +}; + +#define DEEP_SLEEP_ON 1 +#define DEEP_SLEEP_OFF 0 + +#define DEEP_SLEEP_IDLE_TIME 100 + +struct mwifiex_ds_auto_ds { + u16 auto_ds; + u16 idle_time; +}; + +#define PS_MODE_UNCHANGED 0 +#define PS_MODE_AUTO 1 +#define PS_MODE_POLL 2 +#define PS_MODE_NULL 3 + + +struct mwifiex_ds_pm_cfg { + union { + u32 ps_mode; + struct mwifiex_ds_hs_cfg hs_cfg; + struct mwifiex_ds_auto_ds auto_deep_sleep; + u32 sleep_period; + } param; +}; + +struct mwifiex_ioctl_wmm_queue_status_ac { + u8 wmm_acm; + u8 flow_required; + u8 flow_created; + u8 disabled; +}; + +struct mwifiex_ds_wmm_queue_status { + struct mwifiex_ioctl_wmm_queue_status_ac + ac_status[IEEE80211_MAX_QUEUES]; +}; + +struct mwifiex_ds_11n_tx_cfg { + u16 tx_htcap; + u16 tx_htinfo; +}; + +struct mwifiex_ds_11n_amsdu_aggr_ctrl { + u16 enable; + u16 curr_buf_size; +}; + +#define MWIFIEX_NUM_OF_CMD_BUFFER 20 +#define MWIFIEX_SIZE_OF_CMD_BUFFER 2048 + +enum { + MWIFIEX_IE_TYPE_GEN_IE = 0, + MWIFIEX_IE_TYPE_ARP_FILTER, +}; + +enum { + MWIFIEX_REG_MAC = 1, + MWIFIEX_REG_BBP, + MWIFIEX_REG_RF, + MWIFIEX_REG_PMIC, + MWIFIEX_REG_CAU, +}; + +struct mwifiex_ds_reg_rw { + __le32 type; + __le32 offset; + __le32 value; +}; + +#define MAX_EEPROM_DATA 256 + +struct mwifiex_ds_read_eeprom { + __le16 offset; + __le16 byte_count; + u8 value[MAX_EEPROM_DATA]; +}; + +struct mwifiex_ds_misc_gen_ie { + u32 type; + u32 len; + u8 ie_data[IW_CUSTOM_MAX]; +}; + +struct mwifiex_ds_misc_cmd { + u32 len; + u8 cmd[MWIFIEX_SIZE_OF_CMD_BUFFER]; +}; + +#define MWIFIEX_MAX_VSIE_LEN (256) +#define MWIFIEX_MAX_VSIE_NUM (8) +#define MWIFIEX_VSIE_MASK_SCAN 0x01 +#define MWIFIEX_VSIE_MASK_ASSOC 0x02 +#define MWIFIEX_VSIE_MASK_ADHOC 0x04 + +enum { + MWIFIEX_FUNC_INIT = 1, + MWIFIEX_FUNC_SHUTDOWN, +}; + +#endif /* !_MWIFIEX_IOCTL_H_ */ diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c new file mode 100644 index 000000000000..7a9e0b5962ed --- /dev/null +++ b/drivers/net/wireless/mwifiex/join.c @@ -0,0 +1,1462 @@ +/* + * Marvell Wireless LAN device driver: association and ad-hoc start/join + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +#define CAPINFO_MASK (~(BIT(15) | BIT(14) | BIT(12) | BIT(11) | BIT(9))) + +/* + * Append a generic IE as a pass through TLV to a TLV buffer. + * + * This function is called from the network join command preparation routine. + * + * If the IE buffer has been setup by the application, this routine appends + * the buffer as a pass through TLV type to the request. + */ +static int +mwifiex_cmd_append_generic_ie(struct mwifiex_private *priv, u8 **buffer) +{ + int ret_len = 0; + struct mwifiex_ie_types_header ie_header; + + /* Null Checks */ + if (!buffer) + return 0; + if (!(*buffer)) + return 0; + + /* + * If there is a generic ie buffer setup, append it to the return + * parameter buffer pointer. + */ + if (priv->gen_ie_buf_len) { + dev_dbg(priv->adapter->dev, "info: %s: append generic %d to %p\n", + __func__, priv->gen_ie_buf_len, *buffer); + + /* Wrap the generic IE buffer with a pass through TLV type */ + ie_header.type = cpu_to_le16(TLV_TYPE_PASSTHROUGH); + ie_header.len = cpu_to_le16(priv->gen_ie_buf_len); + memcpy(*buffer, &ie_header, sizeof(ie_header)); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += sizeof(ie_header); + ret_len += sizeof(ie_header); + + /* Copy the generic IE buffer to the output buffer, advance + pointer */ + memcpy(*buffer, priv->gen_ie_buf, priv->gen_ie_buf_len); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += priv->gen_ie_buf_len; + ret_len += priv->gen_ie_buf_len; + + /* Reset the generic IE buffer */ + priv->gen_ie_buf_len = 0; + } + + /* return the length appended to the buffer */ + return ret_len; +} + +/* + * Append TSF tracking info from the scan table for the target AP. + * + * This function is called from the network join command preparation routine. + * + * The TSF table TSF sent to the firmware contains two TSF values: + * - The TSF of the target AP from its previous beacon/probe response + * - The TSF timestamp of our local MAC at the time we observed the + * beacon/probe response. + * + * The firmware uses the timestamp values to set an initial TSF value + * in the MAC for the new association after a reassociation attempt. + */ +static int +mwifiex_cmd_append_tsf_tlv(struct mwifiex_private *priv, u8 **buffer, + struct mwifiex_bssdescriptor *bss_desc) +{ + struct mwifiex_ie_types_tsf_timestamp tsf_tlv; + long long tsf_val; + + /* Null Checks */ + if (buffer == NULL) + return 0; + if (*buffer == NULL) + return 0; + + memset(&tsf_tlv, 0x00, sizeof(struct mwifiex_ie_types_tsf_timestamp)); + + tsf_tlv.header.type = cpu_to_le16(TLV_TYPE_TSFTIMESTAMP); + tsf_tlv.header.len = cpu_to_le16(2 * sizeof(tsf_val)); + + memcpy(*buffer, &tsf_tlv, sizeof(tsf_tlv.header)); + *buffer += sizeof(tsf_tlv.header); + + memcpy(*buffer, &tsf_val, sizeof(tsf_val)); + *buffer += sizeof(tsf_val); + + memcpy(&tsf_val, bss_desc->time_stamp, sizeof(tsf_val)); + + dev_dbg(priv->adapter->dev, "info: %s: TSF offset calc: %016llx - " + "%016llx\n", __func__, tsf_val, bss_desc->network_tsf); + + memcpy(*buffer, &tsf_val, sizeof(tsf_val)); + *buffer += sizeof(tsf_val); + + return sizeof(tsf_tlv.header) + (2 * sizeof(tsf_val)); +} + +/* + * This function finds out the common rates between rate1 and rate2. + * + * It will fill common rates in rate1 as output if found. + * + * NOTE: Setting the MSB of the basic rates needs to be taken + * care of, either before or after calling this function. + */ +static int mwifiex_get_common_rates(struct mwifiex_private *priv, u8 *rate1, + u32 rate1_size, u8 *rate2, u32 rate2_size) +{ + int ret = 0; + u8 *ptr = rate1; + u8 *tmp = NULL; + u32 i, j; + + tmp = kmalloc(rate1_size, GFP_KERNEL); + if (!tmp) { + dev_err(priv->adapter->dev, "failed to alloc tmp buf\n"); + return -ENOMEM; + } + + memcpy(tmp, rate1, rate1_size); + memset(rate1, 0, rate1_size); + + for (i = 0; rate2[i] && i < rate2_size; i++) { + for (j = 0; tmp[j] && j < rate1_size; j++) { + /* Check common rate, excluding the bit for + basic rate */ + if ((rate2[i] & 0x7F) == (tmp[j] & 0x7F)) { + *rate1++ = tmp[j]; + break; + } + } + } + + dev_dbg(priv->adapter->dev, "info: Tx data rate set to %#x\n", + priv->data_rate); + + if (!priv->is_data_rate_auto) { + while (*ptr) { + if ((*ptr & 0x7f) == priv->data_rate) { + ret = 0; + goto done; + } + ptr++; + } + dev_err(priv->adapter->dev, "previously set fixed data rate %#x" + " is not compatible with the network\n", + priv->data_rate); + + ret = -1; + goto done; + } + + ret = 0; +done: + kfree(tmp); + return ret; +} + +/* + * This function creates the intersection of the rates supported by a + * target BSS and our adapter settings for use in an assoc/join command. + */ +static int +mwifiex_setup_rates_from_bssdesc(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + u8 *out_rates, u32 *out_rates_size) +{ + u8 card_rates[MWIFIEX_SUPPORTED_RATES]; + u32 card_rates_size = 0; + + /* Copy AP supported rates */ + memcpy(out_rates, bss_desc->supported_rates, MWIFIEX_SUPPORTED_RATES); + /* Get the STA supported rates */ + card_rates_size = mwifiex_get_active_data_rates(priv, card_rates); + /* Get the common rates between AP and STA supported rates */ + if (mwifiex_get_common_rates(priv, out_rates, MWIFIEX_SUPPORTED_RATES, + card_rates, card_rates_size)) { + *out_rates_size = 0; + dev_err(priv->adapter->dev, "%s: cannot get common rates\n", + __func__); + return -1; + } + + *out_rates_size = + min_t(size_t, strlen(out_rates), MWIFIEX_SUPPORTED_RATES); + + return 0; +} + +/* + * This function updates the scan entry TSF timestamps to reflect + * a new association. + */ +static void +mwifiex_update_tsf_timestamps(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *new_bss_desc) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u32 table_idx; + long long new_tsf_base; + signed long long tsf_delta; + + memcpy(&new_tsf_base, new_bss_desc->time_stamp, sizeof(new_tsf_base)); + + tsf_delta = new_tsf_base - new_bss_desc->network_tsf; + + dev_dbg(adapter->dev, "info: TSF: update TSF timestamps, " + "0x%016llx -> 0x%016llx\n", + new_bss_desc->network_tsf, new_tsf_base); + + for (table_idx = 0; table_idx < adapter->num_in_scan_table; + table_idx++) + adapter->scan_table[table_idx].network_tsf += tsf_delta; +} + +/* + * This function appends a WAPI IE. + * + * This function is called from the network join command preparation routine. + * + * If the IE buffer has been setup by the application, this routine appends + * the buffer as a WAPI TLV type to the request. + */ +static int +mwifiex_cmd_append_wapi_ie(struct mwifiex_private *priv, u8 **buffer) +{ + int retLen = 0; + struct mwifiex_ie_types_header ie_header; + + /* Null Checks */ + if (buffer == NULL) + return 0; + if (*buffer == NULL) + return 0; + + /* + * If there is a wapi ie buffer setup, append it to the return + * parameter buffer pointer. + */ + if (priv->wapi_ie_len) { + dev_dbg(priv->adapter->dev, "cmd: append wapi ie %d to %p\n", + priv->wapi_ie_len, *buffer); + + /* Wrap the generic IE buffer with a pass through TLV type */ + ie_header.type = cpu_to_le16(TLV_TYPE_WAPI_IE); + ie_header.len = cpu_to_le16(priv->wapi_ie_len); + memcpy(*buffer, &ie_header, sizeof(ie_header)); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += sizeof(ie_header); + retLen += sizeof(ie_header); + + /* Copy the wapi IE buffer to the output buffer, advance + pointer */ + memcpy(*buffer, priv->wapi_ie, priv->wapi_ie_len); + + /* Increment the return size and the return buffer pointer + param */ + *buffer += priv->wapi_ie_len; + retLen += priv->wapi_ie_len; + + } + /* return the length appended to the buffer */ + return retLen; +} + +/* + * This function appends rsn ie tlv for wpa/wpa2 security modes. + * It is called from the network join command preparation routine. + */ +static int mwifiex_append_rsn_ie_wpa_wpa2(struct mwifiex_private *priv, + u8 **buffer) +{ + struct mwifiex_ie_types_rsn_param_set *rsn_ie_tlv; + int rsn_ie_len; + + if (!buffer || !(*buffer)) + return 0; + + rsn_ie_tlv = (struct mwifiex_ie_types_rsn_param_set *) (*buffer); + rsn_ie_tlv->header.type = cpu_to_le16((u16) priv->wpa_ie[0]); + rsn_ie_tlv->header.type = cpu_to_le16( + le16_to_cpu(rsn_ie_tlv->header.type) & 0x00FF); + rsn_ie_tlv->header.len = cpu_to_le16((u16) priv->wpa_ie[1]); + rsn_ie_tlv->header.len = cpu_to_le16(le16_to_cpu(rsn_ie_tlv->header.len) + & 0x00FF); + if (le16_to_cpu(rsn_ie_tlv->header.len) <= (sizeof(priv->wpa_ie) - 2)) + memcpy(rsn_ie_tlv->rsn_ie, &priv->wpa_ie[2], + le16_to_cpu(rsn_ie_tlv->header.len)); + else + return -1; + + rsn_ie_len = sizeof(rsn_ie_tlv->header) + + le16_to_cpu(rsn_ie_tlv->header.len); + *buffer += rsn_ie_len; + + return rsn_ie_len; +} + +/* + * This function prepares command for association. + * + * This sets the following parameters - + * - Peer MAC address + * - Listen interval + * - Beacon interval + * - Capability information + * + * ...and the following TLVs, as required - + * - SSID TLV + * - PHY TLV + * - SS TLV + * - Rates TLV + * - Authentication TLV + * - Channel TLV + * - WPA/WPA2 IE + * - 11n TLV + * - Vendor specific TLV + * - WMM TLV + * - WAPI IE + * - Generic IE + * - TSF TLV + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf) +{ + struct host_cmd_ds_802_11_associate *assoc = &cmd->params.associate; + struct mwifiex_bssdescriptor *bss_desc; + struct mwifiex_ie_types_ssid_param_set *ssid_tlv; + struct mwifiex_ie_types_phy_param_set *phy_tlv; + struct mwifiex_ie_types_ss_param_set *ss_tlv; + struct mwifiex_ie_types_rates_param_set *rates_tlv; + struct mwifiex_ie_types_auth_type *auth_tlv; + struct mwifiex_ie_types_chan_list_param_set *chan_tlv; + u8 rates[MWIFIEX_SUPPORTED_RATES]; + u32 rates_size; + u16 tmp_cap; + u8 *pos; + int rsn_ie_len = 0; + + bss_desc = (struct mwifiex_bssdescriptor *) data_buf; + pos = (u8 *) assoc; + + mwifiex_cfg_tx_buf(priv, bss_desc); + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_ASSOCIATE); + + /* Save so we know which BSS Desc to use in the response handler */ + priv->attempted_bss_desc = bss_desc; + + memcpy(assoc->peer_sta_addr, + bss_desc->mac_address, sizeof(assoc->peer_sta_addr)); + pos += sizeof(assoc->peer_sta_addr); + + /* Set the listen interval */ + assoc->listen_interval = cpu_to_le16(priv->listen_interval); + /* Set the beacon period */ + assoc->beacon_period = cpu_to_le16(bss_desc->beacon_period); + + pos += sizeof(assoc->cap_info_bitmap); + pos += sizeof(assoc->listen_interval); + pos += sizeof(assoc->beacon_period); + pos += sizeof(assoc->dtim_period); + + ssid_tlv = (struct mwifiex_ie_types_ssid_param_set *) pos; + ssid_tlv->header.type = cpu_to_le16(WLAN_EID_SSID); + ssid_tlv->header.len = cpu_to_le16((u16) bss_desc->ssid.ssid_len); + memcpy(ssid_tlv->ssid, bss_desc->ssid.ssid, + le16_to_cpu(ssid_tlv->header.len)); + pos += sizeof(ssid_tlv->header) + le16_to_cpu(ssid_tlv->header.len); + + phy_tlv = (struct mwifiex_ie_types_phy_param_set *) pos; + phy_tlv->header.type = cpu_to_le16(WLAN_EID_DS_PARAMS); + phy_tlv->header.len = cpu_to_le16(sizeof(phy_tlv->fh_ds.ds_param_set)); + memcpy(&phy_tlv->fh_ds.ds_param_set, + &bss_desc->phy_param_set.ds_param_set.current_chan, + sizeof(phy_tlv->fh_ds.ds_param_set)); + pos += sizeof(phy_tlv->header) + le16_to_cpu(phy_tlv->header.len); + + ss_tlv = (struct mwifiex_ie_types_ss_param_set *) pos; + ss_tlv->header.type = cpu_to_le16(WLAN_EID_CF_PARAMS); + ss_tlv->header.len = cpu_to_le16(sizeof(ss_tlv->cf_ibss.cf_param_set)); + pos += sizeof(ss_tlv->header) + le16_to_cpu(ss_tlv->header.len); + + /* Get the common rates supported between the driver and the BSS Desc */ + if (mwifiex_setup_rates_from_bssdesc + (priv, bss_desc, rates, &rates_size)) + return -1; + + /* Save the data rates into Current BSS state structure */ + priv->curr_bss_params.num_of_rates = rates_size; + memcpy(&priv->curr_bss_params.data_rates, rates, rates_size); + + /* Setup the Rates TLV in the association command */ + rates_tlv = (struct mwifiex_ie_types_rates_param_set *) pos; + rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES); + rates_tlv->header.len = cpu_to_le16((u16) rates_size); + memcpy(rates_tlv->rates, rates, rates_size); + pos += sizeof(rates_tlv->header) + rates_size; + dev_dbg(priv->adapter->dev, "info: ASSOC_CMD: rates size = %d\n", + rates_size); + + /* Add the Authentication type to be used for Auth frames */ + auth_tlv = (struct mwifiex_ie_types_auth_type *) pos; + auth_tlv->header.type = cpu_to_le16(TLV_TYPE_AUTH_TYPE); + auth_tlv->header.len = cpu_to_le16(sizeof(auth_tlv->auth_type)); + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED) + auth_tlv->auth_type = cpu_to_le16( + (u16) priv->sec_info.authentication_mode); + else + auth_tlv->auth_type = cpu_to_le16(NL80211_AUTHTYPE_OPEN_SYSTEM); + + pos += sizeof(auth_tlv->header) + le16_to_cpu(auth_tlv->header.len); + + if (IS_SUPPORT_MULTI_BANDS(priv->adapter) + && !(ISSUPP_11NENABLED(priv->adapter->fw_cap_info) + && (!bss_desc->disable_11n) + && (priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN) + && (bss_desc->bcn_ht_cap) + ) + ) { + /* Append a channel TLV for the channel the attempted AP was + found on */ + chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct mwifiex_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (bss_desc->phy_param_set.ds_param_set.current_chan); + dev_dbg(priv->adapter->dev, "info: Assoc: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type = + mwifiex_band_to_radio_type((u8) bss_desc->bss_band); + + dev_dbg(priv->adapter->dev, "info: Assoc: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + } + + if (!priv->wps.session_enable) { + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); + + if (rsn_ie_len == -1) + return -1; + } + + if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) + && (!bss_desc->disable_11n) + && (priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN)) + mwifiex_cmd_append_11n_tlv(priv, bss_desc, &pos); + + /* Append vendor specific IE TLV */ + mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_ASSOC, &pos); + + mwifiex_wmm_process_association_req(priv, &pos, &bss_desc->wmm_ie, + bss_desc->bcn_ht_cap); + if (priv->sec_info.wapi_enabled && priv->wapi_ie_len) + mwifiex_cmd_append_wapi_ie(priv, &pos); + + + mwifiex_cmd_append_generic_ie(priv, &pos); + + mwifiex_cmd_append_tsf_tlv(priv, &pos, bss_desc); + + cmd->size = cpu_to_le16((u16) (pos - (u8 *) assoc) + S_DS_GEN); + + /* Set the Capability info at last */ + tmp_cap = bss_desc->cap_info_bitmap; + + if (priv->adapter->config_bands == BAND_B) + tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; + + tmp_cap &= CAPINFO_MASK; + dev_dbg(priv->adapter->dev, "info: ASSOC_CMD: tmp_cap=%4X CAPINFO_MASK=%4lX\n", + tmp_cap, CAPINFO_MASK); + assoc->cap_info_bitmap = cpu_to_le16(tmp_cap); + + return 0; +} + +/* + * Association firmware command response handler + * + * The response buffer for the association command has the following + * memory layout. + * + * For cases where an association response was not received (indicated + * by the CapInfo and AId field): + * + * .------------------------------------------------------------. + * | Header(4 * sizeof(t_u16)): Standard command response hdr | + * .------------------------------------------------------------. + * | cap_info/Error Return(t_u16): | + * | 0xFFFF(-1): Internal error | + * | 0xFFFE(-2): Authentication unhandled message | + * | 0xFFFD(-3): Authentication refused | + * | 0xFFFC(-4): Timeout waiting for AP response | + * .------------------------------------------------------------. + * | status_code(t_u16): | + * | If cap_info is -1: | + * | An internal firmware failure prevented the | + * | command from being processed. The status_code | + * | will be set to 1. | + * | | + * | If cap_info is -2: | + * | An authentication frame was received but was | + * | not handled by the firmware. IEEE Status | + * | code for the failure is returned. | + * | | + * | If cap_info is -3: | + * | An authentication frame was received and the | + * | status_code is the IEEE Status reported in the | + * | response. | + * | | + * | If cap_info is -4: | + * | (1) Association response timeout | + * | (2) Authentication response timeout | + * .------------------------------------------------------------. + * | a_id(t_u16): 0xFFFF | + * .------------------------------------------------------------. + * + * + * For cases where an association response was received, the IEEE + * standard association response frame is returned: + * + * .------------------------------------------------------------. + * | Header(4 * sizeof(t_u16)): Standard command response hdr | + * .------------------------------------------------------------. + * | cap_info(t_u16): IEEE Capability | + * .------------------------------------------------------------. + * | status_code(t_u16): IEEE Status Code | + * .------------------------------------------------------------. + * | a_id(t_u16): IEEE Association ID | + * .------------------------------------------------------------. + * | IEEE IEs(variable): Any received IEs comprising the | + * | remaining portion of a received | + * | association response frame. | + * .------------------------------------------------------------. + * + * For simplistic handling, the status_code field can be used to determine + * an association success (0) or failure (non-zero). + */ +int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, void *wq_buf) +{ + int ret = 0; + struct mwifiex_wait_queue *wait_queue = + (struct mwifiex_wait_queue *) wq_buf; + struct ieee_types_assoc_rsp *assoc_rsp; + struct mwifiex_bssdescriptor *bss_desc; + u8 enable_data = true; + + assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params; + + priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN, + sizeof(priv->assoc_rsp_buf)); + + memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size); + + if (le16_to_cpu(assoc_rsp->status_code)) { + priv->adapter->dbg.num_cmd_assoc_failure++; + dev_err(priv->adapter->dev, "ASSOC_RESP: association failed, " + "status code = %d, error = 0x%x, a_id = 0x%x\n", + le16_to_cpu(assoc_rsp->status_code), + le16_to_cpu(assoc_rsp->cap_info_bitmap), + le16_to_cpu(assoc_rsp->a_id)); + + ret = -1; + goto done; + } + + /* Send a Media Connected event, according to the Spec */ + priv->media_connected = true; + + priv->adapter->ps_state = PS_STATE_AWAKE; + priv->adapter->pps_uapsd_mode = false; + priv->adapter->tx_lock_flag = false; + + /* Set the attempted BSSID Index to current */ + bss_desc = priv->attempted_bss_desc; + + dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: %s\n", + bss_desc->ssid.ssid); + + /* Make a copy of current BSSID descriptor */ + memcpy(&priv->curr_bss_params.bss_descriptor, + bss_desc, sizeof(struct mwifiex_bssdescriptor)); + + /* Update curr_bss_params */ + priv->curr_bss_params.bss_descriptor.channel + = bss_desc->phy_param_set.ds_param_set.current_chan; + + priv->curr_bss_params.band = (u8) bss_desc->bss_band; + + /* + * Adjust the timestamps in the scan table to be relative to the newly + * associated AP's TSF + */ + mwifiex_update_tsf_timestamps(priv, bss_desc); + + if (bss_desc->wmm_ie.vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC) + priv->curr_bss_params.wmm_enabled = true; + else + priv->curr_bss_params.wmm_enabled = false; + + if ((priv->wmm_required || bss_desc->bcn_ht_cap) + && priv->curr_bss_params.wmm_enabled) + priv->wmm_enabled = true; + else + priv->wmm_enabled = false; + + priv->curr_bss_params.wmm_uapsd_enabled = false; + + if (priv->wmm_enabled) + priv->curr_bss_params.wmm_uapsd_enabled + = ((bss_desc->wmm_ie.qos_info_bitmap & + IEEE80211_WMM_IE_AP_QOSINFO_UAPSD) ? 1 : 0); + + dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: curr_pkt_filter is %#x\n", + priv->curr_pkt_filter); + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + priv->wpa_is_gtk_set = false; + + if (priv->wmm_enabled) { + /* Don't re-enable carrier until we get the WMM_GET_STATUS + event */ + enable_data = false; + } else { + /* Since WMM is not enabled, setup the queues with the + defaults */ + mwifiex_wmm_setup_queue_priorities(priv, NULL); + mwifiex_wmm_setup_ac_downgrade(priv); + } + + if (enable_data) + dev_dbg(priv->adapter->dev, + "info: post association, re-enabling data flow\n"); + + /* Reset SNR/NF/RSSI values */ + priv->data_rssi_last = 0; + priv->data_nf_last = 0; + priv->data_rssi_avg = 0; + priv->data_nf_avg = 0; + priv->bcn_rssi_last = 0; + priv->bcn_nf_last = 0; + priv->bcn_rssi_avg = 0; + priv->bcn_nf_avg = 0; + priv->rxpd_rate = 0; + priv->rxpd_htinfo = 0; + + mwifiex_save_curr_bcn(priv); + + priv->adapter->dbg.num_cmd_assoc_success++; + + dev_dbg(priv->adapter->dev, "info: ASSOC_RESP: associated\n"); + + /* Add the ra_list here for infra mode as there will be only 1 ra + always */ + mwifiex_ralist_add(priv, + priv->curr_bss_params.bss_descriptor.mac_address); + + if (!netif_carrier_ok(priv->netdev)) + netif_carrier_on(priv->netdev); + if (netif_queue_stopped(priv->netdev)) + netif_wake_queue(priv->netdev); + + if (priv->sec_info.wpa_enabled || priv->sec_info.wpa2_enabled) + priv->scan_block = true; + +done: + /* Need to indicate IOCTL complete */ + if (wait_queue) { + if (ret) { + if (assoc_rsp->status_code) + wait_queue->status = + le16_to_cpu(assoc_rsp->status_code); + else + wait_queue->status = MWIFIEX_ERROR_ASSOC_FAIL; + } else { + wait_queue->status = MWIFIEX_ERROR_NO_ERROR; + } + } + + return ret; +} + +/* + * This function prepares command for ad-hoc start. + * + * Driver will fill up SSID, BSS mode, IBSS parameters, physical + * parameters, probe delay, and capability information. Firmware + * will fill up beacon period, basic rates and operational rates. + * + * In addition, the following TLVs are added - + * - Channel TLV + * - Vendor specific IE + * - WPA/WPA2 IE + * - HT Capabilities IE + * - HT Information IE + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int +mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + int ret = 0, rsn_ie_len = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_ad_hoc_start *adhoc_start = + &cmd->params.adhoc_start; + struct mwifiex_bssdescriptor *bss_desc; + u32 cmd_append_size = 0; + u32 i; + u16 tmp_cap; + uint16_t ht_cap_info; + struct mwifiex_ie_types_chan_list_param_set *chan_tlv; + + struct mwifiex_ie_types_htcap *ht_cap; + struct mwifiex_ie_types_htinfo *ht_info; + u8 *pos = (u8 *) adhoc_start + + sizeof(struct host_cmd_ds_802_11_ad_hoc_start); + + if (!adapter) + return -1; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_START); + + bss_desc = &priv->curr_bss_params.bss_descriptor; + priv->attempted_bss_desc = bss_desc; + + /* + * Fill in the parameters for 2 data structures: + * 1. struct host_cmd_ds_802_11_ad_hoc_start command + * 2. bss_desc + * Driver will fill up SSID, bss_mode,IBSS param, Physical Param, + * probe delay, and Cap info. + * Firmware will fill up beacon period, Basic rates + * and operational rates. + */ + + memset(adhoc_start->ssid, 0, IEEE80211_MAX_SSID_LEN); + + memcpy(adhoc_start->ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len); + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: SSID = %s\n", + adhoc_start->ssid); + + memset(bss_desc->ssid.ssid, 0, IEEE80211_MAX_SSID_LEN); + memcpy(bss_desc->ssid.ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid, + ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len); + + bss_desc->ssid.ssid_len = + ((struct mwifiex_802_11_ssid *) data_buf)->ssid_len; + + /* Set the BSS mode */ + adhoc_start->bss_mode = HostCmd_BSS_MODE_IBSS; + bss_desc->bss_mode = NL80211_IFTYPE_ADHOC; + adhoc_start->beacon_period = cpu_to_le16(priv->beacon_period); + bss_desc->beacon_period = priv->beacon_period; + + /* Set Physical param set */ +/* Parameter IE Id */ +#define DS_PARA_IE_ID 3 +/* Parameter IE length */ +#define DS_PARA_IE_LEN 1 + + adhoc_start->phy_param_set.ds_param_set.element_id = DS_PARA_IE_ID; + adhoc_start->phy_param_set.ds_param_set.len = DS_PARA_IE_LEN; + + if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, adapter->adhoc_start_band, (u16) + priv->adhoc_channel)) { + struct mwifiex_chan_freq_power *cfp; + cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv, + adapter->adhoc_start_band, FIRST_VALID_CHANNEL); + if (cfp) + priv->adhoc_channel = (u8) cfp->channel; + } + + if (!priv->adhoc_channel) { + dev_err(adapter->dev, "ADHOC_S_CMD: adhoc_channel cannot be 0\n"); + return -1; + } + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: creating ADHOC on channel %d\n", + priv->adhoc_channel); + + priv->curr_bss_params.bss_descriptor.channel = priv->adhoc_channel; + priv->curr_bss_params.band = adapter->adhoc_start_band; + + bss_desc->channel = priv->adhoc_channel; + adhoc_start->phy_param_set.ds_param_set.current_chan = + priv->adhoc_channel; + + memcpy(&bss_desc->phy_param_set, &adhoc_start->phy_param_set, + sizeof(union ieee_types_phy_param_set)); + + /* Set IBSS param set */ +/* IBSS parameter IE Id */ +#define IBSS_PARA_IE_ID 6 +/* IBSS parameter IE length */ +#define IBSS_PARA_IE_LEN 2 + + adhoc_start->ss_param_set.ibss_param_set.element_id = IBSS_PARA_IE_ID; + adhoc_start->ss_param_set.ibss_param_set.len = IBSS_PARA_IE_LEN; + adhoc_start->ss_param_set.ibss_param_set.atim_window + = cpu_to_le16(priv->atim_window); + memcpy(&bss_desc->ss_param_set, &adhoc_start->ss_param_set, + sizeof(union ieee_types_ss_param_set)); + + /* Set Capability info */ + bss_desc->cap_info_bitmap |= WLAN_CAPABILITY_IBSS; + tmp_cap = le16_to_cpu(adhoc_start->cap_info_bitmap); + tmp_cap &= ~WLAN_CAPABILITY_ESS; + tmp_cap |= WLAN_CAPABILITY_IBSS; + + /* Set up privacy in bss_desc */ + if (priv->sec_info.encryption_mode) { + /* Ad-Hoc capability privacy on */ + dev_dbg(adapter->dev, + "info: ADHOC_S_CMD: wep_status set privacy to WEP\n"); + bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; + tmp_cap |= WLAN_CAPABILITY_PRIVACY; + } else { + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: wep_status NOT set," + " setting privacy to ACCEPT ALL\n"); + bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL; + } + + memset(adhoc_start->DataRate, 0, sizeof(adhoc_start->DataRate)); + mwifiex_get_active_data_rates(priv, adhoc_start->DataRate); + if ((adapter->adhoc_start_band & BAND_G) && + (priv->curr_pkt_filter & HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON)) { + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL, + HostCmd_ACT_GEN_SET, + 0, NULL, &priv->curr_pkt_filter); + + if (ret) { + dev_err(adapter->dev, + "ADHOC_S_CMD: G Protection config failed\n"); + return -1; + } + } + /* Find the last non zero */ + for (i = 0; i < sizeof(adhoc_start->DataRate) && + adhoc_start->DataRate[i]; + i++) + ; + + priv->curr_bss_params.num_of_rates = i; + + /* Copy the ad-hoc creating rates into Current BSS rate structure */ + memcpy(&priv->curr_bss_params.data_rates, + &adhoc_start->DataRate, priv->curr_bss_params.num_of_rates); + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: rates=%02x %02x %02x %02x\n", + adhoc_start->DataRate[0], adhoc_start->DataRate[1], + adhoc_start->DataRate[2], adhoc_start->DataRate[3]); + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: AD-HOC Start command is ready\n"); + + if (IS_SUPPORT_MULTI_BANDS(adapter)) { + /* Append a channel TLV */ + chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct mwifiex_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (u8) priv->curr_bss_params.bss_descriptor.channel; + + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type + = mwifiex_band_to_radio_type(priv->curr_bss_params.band); + if (adapter->adhoc_start_band & BAND_GN + || adapter->adhoc_start_band & BAND_AN) { + if (adapter->chan_offset == SEC_CHANNEL_ABOVE) + chan_tlv->chan_scan_param[0].radio_type |= + SECOND_CHANNEL_ABOVE; + else if (adapter->chan_offset == SEC_CHANNEL_BELOW) + chan_tlv->chan_scan_param[0].radio_type |= + SECOND_CHANNEL_BELOW; + } + dev_dbg(adapter->dev, "info: ADHOC_S_CMD: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + cmd_append_size += + sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + } + + /* Append vendor specific IE TLV */ + cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv, + MWIFIEX_VSIE_MASK_ADHOC, &pos); + + if (priv->sec_info.wpa_enabled) { + rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); + if (rsn_ie_len == -1) + return -1; + cmd_append_size += rsn_ie_len; + } + + if (adapter->adhoc_11n_enabled) { + { + ht_cap = (struct mwifiex_ie_types_htcap *) pos; + memset(ht_cap, 0, + sizeof(struct mwifiex_ie_types_htcap)); + ht_cap->header.type = + cpu_to_le16(WLAN_EID_HT_CAPABILITY); + ht_cap->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_cap)); + ht_cap_info = le16_to_cpu(ht_cap->ht_cap.cap_info); + + ht_cap_info |= IEEE80211_HT_CAP_SGI_20; + if (adapter->chan_offset) { + ht_cap_info |= IEEE80211_HT_CAP_SGI_40; + ht_cap_info |= IEEE80211_HT_CAP_DSSSCCK40; + ht_cap_info |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask); + } + + ht_cap->ht_cap.ampdu_params_info + = IEEE80211_HT_MAX_AMPDU_64K; + ht_cap->ht_cap.mcs.rx_mask[0] = 0xff; + pos += sizeof(struct mwifiex_ie_types_htcap); + cmd_append_size += + sizeof(struct mwifiex_ie_types_htcap); + } + { + ht_info = (struct mwifiex_ie_types_htinfo *) pos; + memset(ht_info, 0, + sizeof(struct mwifiex_ie_types_htinfo)); + ht_info->header.type = + cpu_to_le16(WLAN_EID_HT_INFORMATION); + ht_info->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_info)); + ht_info->ht_info.control_chan = + (u8) priv->curr_bss_params.bss_descriptor. + channel; + if (adapter->chan_offset) { + ht_info->ht_info.ht_param = + adapter->chan_offset; + ht_info->ht_info.ht_param |= + IEEE80211_HT_PARAM_CHAN_WIDTH_ANY; + } + ht_info->ht_info.operation_mode = + cpu_to_le16(NON_GREENFIELD_STAS); + ht_info->ht_info.basic_set[0] = 0xff; + pos += sizeof(struct mwifiex_ie_types_htinfo); + cmd_append_size += + sizeof(struct mwifiex_ie_types_htinfo); + } + } + + cmd->size = cpu_to_le16((u16) + (sizeof(struct host_cmd_ds_802_11_ad_hoc_start) + + S_DS_GEN + cmd_append_size)); + + if (adapter->adhoc_start_band == BAND_B) + tmp_cap &= ~WLAN_CAPABILITY_SHORT_SLOT_TIME; + else + tmp_cap |= WLAN_CAPABILITY_SHORT_SLOT_TIME; + + adhoc_start->cap_info_bitmap = cpu_to_le16(tmp_cap); + + return 0; +} + +/* + * This function prepares command for ad-hoc join. + * + * Most of the parameters are set up by copying from the target BSS descriptor + * from the scan response. + * + * In addition, the following TLVs are added - + * - Channel TLV + * - Vendor specific IE + * - WPA/WPA2 IE + * - 11n IE + * + * Preparation also includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +int +mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + int ret = 0, rsn_ie_len = 0; + struct host_cmd_ds_802_11_ad_hoc_join *adhoc_join = + &cmd->params.adhoc_join; + struct mwifiex_bssdescriptor *bss_desc = + (struct mwifiex_bssdescriptor *) data_buf; + struct mwifiex_ie_types_chan_list_param_set *chan_tlv; + u32 cmd_append_size = 0; + u16 tmp_cap; + u32 i, rates_size = 0; + u16 curr_pkt_filter; + u8 *pos = + (u8 *) adhoc_join + + sizeof(struct host_cmd_ds_802_11_ad_hoc_join); + +/* Use G protection */ +#define USE_G_PROTECTION 0x02 + if (bss_desc->erp_flags & USE_G_PROTECTION) { + curr_pkt_filter = + priv-> + curr_pkt_filter | HostCmd_ACT_MAC_ADHOC_G_PROTECTION_ON; + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL, + HostCmd_ACT_GEN_SET, 0, NULL, + &curr_pkt_filter); + if (ret) { + dev_err(priv->adapter->dev, + "ADHOC_J_CMD: G Protection config failed\n"); + return -1; + } + } + + priv->attempted_bss_desc = bss_desc; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_JOIN); + + adhoc_join->bss_descriptor.bss_mode = HostCmd_BSS_MODE_IBSS; + + adhoc_join->bss_descriptor.beacon_period + = cpu_to_le16(bss_desc->beacon_period); + + memcpy(&adhoc_join->bss_descriptor.bssid, + &bss_desc->mac_address, ETH_ALEN); + + memcpy(&adhoc_join->bss_descriptor.ssid, + &bss_desc->ssid.ssid, bss_desc->ssid.ssid_len); + + memcpy(&adhoc_join->bss_descriptor.phy_param_set, + &bss_desc->phy_param_set, + sizeof(union ieee_types_phy_param_set)); + + memcpy(&adhoc_join->bss_descriptor.ss_param_set, + &bss_desc->ss_param_set, sizeof(union ieee_types_ss_param_set)); + + tmp_cap = bss_desc->cap_info_bitmap; + + tmp_cap &= CAPINFO_MASK; + + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: tmp_cap=%4X" + " CAPINFO_MASK=%4lX\n", tmp_cap, CAPINFO_MASK); + + /* Information on BSSID descriptor passed to FW */ + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: BSSID = %pM, SSID = %s\n", + adhoc_join->bss_descriptor.bssid, + adhoc_join->bss_descriptor.ssid); + + for (i = 0; bss_desc->supported_rates[i] && + i < MWIFIEX_SUPPORTED_RATES; + i++) + ; + rates_size = i; + + /* Copy Data Rates from the Rates recorded in scan response */ + memset(adhoc_join->bss_descriptor.data_rates, 0, + sizeof(adhoc_join->bss_descriptor.data_rates)); + memcpy(adhoc_join->bss_descriptor.data_rates, + bss_desc->supported_rates, rates_size); + + /* Copy the adhoc join rates into Current BSS state structure */ + priv->curr_bss_params.num_of_rates = rates_size; + memcpy(&priv->curr_bss_params.data_rates, bss_desc->supported_rates, + rates_size); + + /* Copy the channel information */ + priv->curr_bss_params.bss_descriptor.channel = bss_desc->channel; + priv->curr_bss_params.band = (u8) bss_desc->bss_band; + + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED + || priv->sec_info.wpa_enabled) + tmp_cap |= WLAN_CAPABILITY_PRIVACY; + + if (IS_SUPPORT_MULTI_BANDS(priv->adapter)) { + /* Append a channel TLV */ + chan_tlv = (struct mwifiex_ie_types_chan_list_param_set *) pos; + chan_tlv->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + chan_tlv->header.len = + cpu_to_le16(sizeof(struct mwifiex_chan_scan_param_set)); + + memset(chan_tlv->chan_scan_param, 0x00, + sizeof(struct mwifiex_chan_scan_param_set)); + chan_tlv->chan_scan_param[0].chan_number = + (bss_desc->phy_param_set.ds_param_set.current_chan); + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: TLV Chan = %d\n", + chan_tlv->chan_scan_param[0].chan_number); + + chan_tlv->chan_scan_param[0].radio_type = + mwifiex_band_to_radio_type((u8) bss_desc->bss_band); + + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: TLV Band = %d\n", + chan_tlv->chan_scan_param[0].radio_type); + pos += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + cmd_append_size += sizeof(chan_tlv->header) + + sizeof(struct mwifiex_chan_scan_param_set); + } + + if (priv->sec_info.wpa_enabled) + rsn_ie_len = mwifiex_append_rsn_ie_wpa_wpa2(priv, &pos); + if (rsn_ie_len == -1) + return -1; + cmd_append_size += rsn_ie_len; + + if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info)) + cmd_append_size += mwifiex_cmd_append_11n_tlv(priv, + bss_desc, &pos); + + /* Append vendor specific IE TLV */ + cmd_append_size += mwifiex_cmd_append_vsie_tlv(priv, + MWIFIEX_VSIE_MASK_ADHOC, &pos); + + cmd->size = cpu_to_le16((u16) + (sizeof(struct host_cmd_ds_802_11_ad_hoc_join) + + S_DS_GEN + cmd_append_size)); + + adhoc_join->bss_descriptor.cap_info_bitmap = cpu_to_le16(tmp_cap); + + return ret; +} + +/* + * This function handles the command response of ad-hoc start and + * ad-hoc join. + * + * The function generates a device-connected event to notify + * the applications, in case of successful ad-hoc start/join, and + * saves the beacon buffer. + */ +int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, void *wq_buf) +{ + int ret = 0; + struct mwifiex_wait_queue *wait_queue = + (struct mwifiex_wait_queue *) wq_buf; + struct host_cmd_ds_802_11_ad_hoc_result *adhoc_result; + struct mwifiex_bssdescriptor *bss_desc; + u16 command = le16_to_cpu(resp->command); + u16 result = le16_to_cpu(resp->result); + + adhoc_result = &resp->params.adhoc_result; + + bss_desc = priv->attempted_bss_desc; + + /* Join result code 0 --> SUCCESS */ + if (result) { + dev_err(priv->adapter->dev, "ADHOC_RESP: failed\n"); + if (priv->media_connected) + mwifiex_reset_connect_state(priv); + + memset(&priv->curr_bss_params.bss_descriptor, + 0x00, sizeof(struct mwifiex_bssdescriptor)); + + ret = -1; + goto done; + } + + /* Send a Media Connected event, according to the Spec */ + priv->media_connected = true; + + if (command == HostCmd_CMD_802_11_AD_HOC_START) { + dev_dbg(priv->adapter->dev, "info: ADHOC_S_RESP %s\n", + bss_desc->ssid.ssid); + + /* Update the created network descriptor with the new BSSID */ + memcpy(bss_desc->mac_address, + adhoc_result->bssid, ETH_ALEN); + + priv->adhoc_state = ADHOC_STARTED; + } else { + /* + * Now the join cmd should be successful. + * If BSSID has changed use SSID to compare instead of BSSID + */ + dev_dbg(priv->adapter->dev, "info: ADHOC_J_RESP %s\n", + bss_desc->ssid.ssid); + + /* + * Make a copy of current BSSID descriptor, only needed for + * join since the current descriptor is already being used + * for adhoc start + */ + memcpy(&priv->curr_bss_params.bss_descriptor, + bss_desc, sizeof(struct mwifiex_bssdescriptor)); + + priv->adhoc_state = ADHOC_JOINED; + } + + dev_dbg(priv->adapter->dev, "info: ADHOC_RESP: channel = %d\n", + priv->adhoc_channel); + dev_dbg(priv->adapter->dev, "info: ADHOC_RESP: BSSID = %pM\n", + priv->curr_bss_params.bss_descriptor.mac_address); + + if (!netif_carrier_ok(priv->netdev)) + netif_carrier_on(priv->netdev); + if (netif_queue_stopped(priv->netdev)) + netif_wake_queue(priv->netdev); + + mwifiex_save_curr_bcn(priv); + +done: + /* Need to indicate IOCTL complete */ + if (wait_queue) { + if (ret) + wait_queue->status = MWIFIEX_ERROR_ASSOC_FAIL; + else + wait_queue->status = MWIFIEX_ERROR_NO_ERROR; + + } + + return ret; +} + +/* + * This function associates to a specific BSS discovered in a scan. + * + * It clears any past association response stored for application + * retrieval and calls the command preparation routine to send the + * command to firmware. + */ +int mwifiex_associate(struct mwifiex_private *priv, + void *wait_queue, struct mwifiex_bssdescriptor *bss_desc) +{ + int ret = 0; + u8 current_bssid[ETH_ALEN]; + + /* Return error if the adapter or table entry is not marked as infra */ + if ((priv->bss_mode != NL80211_IFTYPE_STATION) || + (bss_desc->bss_mode != NL80211_IFTYPE_STATION)) + return -1; + + memcpy(¤t_bssid, + &priv->curr_bss_params.bss_descriptor.mac_address, + sizeof(current_bssid)); + + /* Clear any past association response stored for application + retrieval */ + priv->assoc_rsp_size = 0; + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_ASSOCIATE, + HostCmd_ACT_GEN_SET, 0, wait_queue, + bss_desc); + + return ret; +} + +/* + * This function starts an ad-hoc network. + * + * It calls the command preparation routine to send the command to firmware. + */ +int +mwifiex_adhoc_start(struct mwifiex_private *priv, + void *wait_queue, struct mwifiex_802_11_ssid *adhoc_ssid) +{ + int ret = 0; + + dev_dbg(priv->adapter->dev, "info: Adhoc Channel = %d\n", + priv->adhoc_channel); + dev_dbg(priv->adapter->dev, "info: curr_bss_params.channel = %d\n", + priv->curr_bss_params.bss_descriptor.channel); + dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %d\n", + priv->curr_bss_params.band); + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_AD_HOC_START, + HostCmd_ACT_GEN_SET, 0, wait_queue, + adhoc_ssid); + + return ret; +} + +/* + * This function joins an ad-hoc network found in a previous scan. + * + * It calls the command preparation routine to send the command to firmware, + * if already not connected to the requested SSID. + */ +int mwifiex_adhoc_join(struct mwifiex_private *priv, + void *wait_queue, struct mwifiex_bssdescriptor *bss_desc) +{ + int ret = 0; + + dev_dbg(priv->adapter->dev, "info: adhoc join: curr_bss ssid =%s\n", + priv->curr_bss_params.bss_descriptor.ssid.ssid); + dev_dbg(priv->adapter->dev, "info: adhoc join: curr_bss ssid_len =%u\n", + priv->curr_bss_params.bss_descriptor.ssid.ssid_len); + dev_dbg(priv->adapter->dev, "info: adhoc join: ssid =%s\n", + bss_desc->ssid.ssid); + dev_dbg(priv->adapter->dev, "info: adhoc join: ssid_len =%u\n", + bss_desc->ssid.ssid_len); + + /* Check if the requested SSID is already joined */ + if (priv->curr_bss_params.bss_descriptor.ssid.ssid_len && + !mwifiex_ssid_cmp(&bss_desc->ssid, + &priv->curr_bss_params.bss_descriptor.ssid) && + (priv->curr_bss_params.bss_descriptor.bss_mode == + NL80211_IFTYPE_ADHOC)) { + dev_dbg(priv->adapter->dev, "info: ADHOC_J_CMD: new ad-hoc SSID" + " is the same as current; not attempting to re-join\n"); + return -1; + } + + dev_dbg(priv->adapter->dev, "info: curr_bss_params.channel = %d\n", + priv->curr_bss_params.bss_descriptor.channel); + dev_dbg(priv->adapter->dev, "info: curr_bss_params.band = %c\n", + priv->curr_bss_params.band); + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_AD_HOC_JOIN, + HostCmd_ACT_GEN_SET, 0, wait_queue, + bss_desc); + + return ret; +} + +/* + * This function deauthenticates/disconnects from infra network by sending + * deauthentication request. + */ +static int mwifiex_deauthenticate_infra(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u8 *mac) +{ + u8 mac_address[ETH_ALEN]; + int ret = 0; + u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 }; + + if (mac) { + if (!memcmp(mac, zero_mac, sizeof(zero_mac))) + memcpy((u8 *) &mac_address, + (u8 *) &priv->curr_bss_params.bss_descriptor. + mac_address, ETH_ALEN); + else + memcpy((u8 *) &mac_address, (u8 *) mac, ETH_ALEN); + } else { + memcpy((u8 *) &mac_address, (u8 *) &priv->curr_bss_params. + bss_descriptor.mac_address, ETH_ALEN); + } + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_DEAUTHENTICATE, + HostCmd_ACT_GEN_SET, 0, wait, &mac_address); + + if (!ret && wait) + ret = -EINPROGRESS; + + return ret; +} + +/* + * This function deauthenticates/disconnects from a BSS. + * + * In case of infra made, it sends deauthentication request, and + * in case of ad-hoc mode, a stop network request is sent to the firmware. + */ +int mwifiex_deauthenticate(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, u8 *mac) +{ + int ret = 0; + + if (priv->media_connected) { + if (priv->bss_mode == NL80211_IFTYPE_STATION) { + ret = mwifiex_deauthenticate_infra(priv, wait, mac); + } else if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_AD_HOC_STOP, + HostCmd_ACT_GEN_SET, 0, wait, NULL); + + if (!ret && wait) + ret = -EINPROGRESS; + } + } + + return ret; +} + +/* + * This function converts band to radio type used in channel TLV. + */ +u8 +mwifiex_band_to_radio_type(u8 band) +{ + u8 ret_radio_type; + + switch (band) { + case BAND_A: + case BAND_AN: + case BAND_A | BAND_AN: + ret_radio_type = HostCmd_SCAN_RADIO_TYPE_A; + break; + case BAND_B: + case BAND_G: + case BAND_B | BAND_G: + default: + ret_radio_type = HostCmd_SCAN_RADIO_TYPE_BG; + break; + } + + return ret_radio_type; +} diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c new file mode 100644 index 000000000000..ed89ca41a902 --- /dev/null +++ b/drivers/net/wireless/mwifiex/main.c @@ -0,0 +1,1102 @@ +/* + * Marvell Wireless LAN device driver: major functions + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "main.h" +#include "wmm.h" +#include "cfg80211.h" +#include "11n.h" + +#define VERSION "1.0" + +const char driver_version[] = "mwifiex " VERSION " (%s) "; + +struct mwifiex_adapter *g_adapter; +EXPORT_SYMBOL_GPL(g_adapter); + +static struct mwifiex_bss_attr mwifiex_bss_sta[] = { + {MWIFIEX_BSS_TYPE_STA, MWIFIEX_DATA_FRAME_TYPE_ETH_II, true, 0, 0}, +}; + +static int drv_mode = DRV_MODE_STA; + +static char fw_name[32] = DEFAULT_FW_NAME; + +/* Supported drv_mode table */ +static struct mwifiex_drv_mode mwifiex_drv_mode_tbl[] = { + { + /* drv_mode */ + .drv_mode = DRV_MODE_STA, + /* intf number */ + .intf_num = ARRAY_SIZE(mwifiex_bss_sta), + /* bss_attr */ + .bss_attr = mwifiex_bss_sta, + } + , +}; + +/* + * This function registers the device and performs all the necessary + * initializations. + * + * The following initialization operations are performed - + * - Allocate adapter structure + * - Save interface specific operations table in adapter + * - Call interface specific initialization routine + * - Allocate private structures + * - Set default adapter structure parameters + * - Initialize locks + * + * In case of any errors during inittialization, this function also ensures + * proper cleanup before exiting. + */ +static int mwifiex_register(void *card, struct mwifiex_if_ops *if_ops, + struct mwifiex_device *mdevice, void **padapter) +{ + int ret = 0; + struct mwifiex_adapter *adapter = NULL; + u8 i = 0; + + adapter = kzalloc(sizeof(struct mwifiex_adapter), GFP_KERNEL); + /* Allocate memory for adapter structure */ + if (!adapter) + return -1; + + g_adapter = adapter; + adapter->card = card; + + /* Save interface specific operations in adapter */ + memmove(&adapter->if_ops, if_ops, sizeof(struct mwifiex_if_ops)); + + /* card specific initialization has been deferred until now .. */ + ret = adapter->if_ops.init_if(adapter); + if (ret) + goto error; + + adapter->priv_num = 0; + for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) { + adapter->priv[i] = NULL; + + if (!mdevice->bss_attr[i].active) + continue; + + /* For valid bss_attr, + allocate memory for private structure */ + adapter->priv[i] = kzalloc(sizeof(struct mwifiex_private), + GFP_KERNEL); + if (!adapter->priv[i]) { + dev_err(adapter->dev, "%s: failed to alloc priv[%d]\n", + __func__, i); + goto error; + } + + adapter->priv_num++; + memset(adapter->priv[i], 0, + sizeof(struct mwifiex_private)); + adapter->priv[i]->adapter = adapter; + /* Save bss_type, frame_type & bss_priority */ + adapter->priv[i]->bss_type = (u8) mdevice->bss_attr[i].bss_type; + adapter->priv[i]->frame_type = + (u8) mdevice->bss_attr[i].frame_type; + adapter->priv[i]->bss_priority = + (u8) mdevice->bss_attr[i].bss_priority; + if (mdevice->bss_attr[i].bss_type == MWIFIEX_BSS_TYPE_STA) + adapter->priv[i]->bss_role = MWIFIEX_BSS_ROLE_STA; + else if (mdevice->bss_attr[i].bss_type == MWIFIEX_BSS_TYPE_UAP) + adapter->priv[i]->bss_role = MWIFIEX_BSS_ROLE_UAP; + + /* Save bss_index & bss_num */ + adapter->priv[i]->bss_index = i; + adapter->priv[i]->bss_num = mdevice->bss_attr[i].bss_num; + } + + /* Initialize lock variables */ + if (mwifiex_init_lock_list(adapter)) + goto error; + + init_timer(&adapter->cmd_timer); + adapter->cmd_timer.function = mwifiex_cmd_timeout_func; + adapter->cmd_timer.data = (unsigned long) adapter; + + /* Return pointer of struct mwifiex_adapter */ + *padapter = adapter; + return 0; + +error: + dev_dbg(adapter->dev, "info: leave mwifiex_register with error\n"); + + /* Free lock variables */ + mwifiex_free_lock_list(adapter); + for (i = 0; i < MWIFIEX_MAX_BSS_NUM; i++) + kfree(adapter->priv[i]); + kfree(adapter); + + return -1; +} + +/* + * This function unregisters the device and performs all the necessary + * cleanups. + * + * The following cleanup operations are performed - + * - Free the timers + * - Free beacon buffers + * - Free private structures + * - Free adapter structure + */ +static int mwifiex_unregister(struct mwifiex_adapter *adapter) +{ + s32 i = 0; + + del_timer(&adapter->cmd_timer); + + /* Free private structures */ + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + mwifiex_free_curr_bcn(adapter->priv[i]); + kfree(adapter->priv[i]); + } + } + + kfree(adapter); + return 0; +} + +/* + * The main process. + * + * This function is the main procedure of the driver and handles various driver + * operations. It runs in a loop and provides the core functionalities. + * + * The main responsibilities of this function are - + * - Ensure concurrency control + * - Handle pending interrupts and call interrupt handlers + * - Wake up the card if required + * - Handle command responses and call response handlers + * - Handle events and call event handlers + * - Execute pending commands + * - Transmit pending data packets + */ +int mwifiex_main_process(struct mwifiex_adapter *adapter) +{ + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&adapter->main_proc_lock, flags); + + /* Check if already processing */ + if (adapter->mwifiex_processing) { + spin_unlock_irqrestore(&adapter->main_proc_lock, flags); + goto exit_main_proc; + } else { + adapter->mwifiex_processing = true; + spin_unlock_irqrestore(&adapter->main_proc_lock, flags); + } +process_start: + do { + if ((adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) || + (adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY)) + break; + + /* Handle pending interrupt if any */ + if (adapter->int_status) { + if (adapter->hs_activated) + mwifiex_process_hs_config(adapter); + adapter->if_ops.process_int_status(adapter); + } + + /* Need to wake up the card ? */ + if ((adapter->ps_state == PS_STATE_SLEEP) && + (adapter->pm_wakeup_card_req && + !adapter->pm_wakeup_fw_try) && + (is_command_pending(adapter) + || !mwifiex_wmm_lists_empty(adapter))) { + adapter->pm_wakeup_fw_try = true; + adapter->if_ops.wakeup(adapter); + continue; + } + if (IS_CARD_RX_RCVD(adapter)) { + adapter->pm_wakeup_fw_try = false; + if (adapter->ps_state == PS_STATE_SLEEP) + adapter->ps_state = PS_STATE_AWAKE; + } else { + /* We have tried to wakeup the card already */ + if (adapter->pm_wakeup_fw_try) + break; + if (adapter->ps_state != PS_STATE_AWAKE || + adapter->tx_lock_flag) + break; + + if (adapter->scan_processing || adapter->data_sent + || mwifiex_wmm_lists_empty(adapter)) { + if (adapter->cmd_sent || adapter->curr_cmd + || (!is_command_pending(adapter))) + break; + } + } + + /* Check for Cmd Resp */ + if (adapter->cmd_resp_received) { + adapter->cmd_resp_received = false; + mwifiex_process_cmdresp(adapter); + + /* call mwifiex back when init_fw is done */ + if (adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE) { + adapter->hw_status = MWIFIEX_HW_STATUS_READY; + mwifiex_init_fw_complete(adapter); + } + } + + /* Check for event */ + if (adapter->event_received) { + adapter->event_received = false; + mwifiex_process_event(adapter); + } + + /* Check if we need to confirm Sleep Request + received previously */ + if (adapter->ps_state == PS_STATE_PRE_SLEEP) { + if (!adapter->cmd_sent && !adapter->curr_cmd) + mwifiex_check_ps_cond(adapter); + } + + /* * The ps_state may have been changed during processing of + * Sleep Request event. + */ + if ((adapter->ps_state == PS_STATE_SLEEP) + || (adapter->ps_state == PS_STATE_PRE_SLEEP) + || (adapter->ps_state == PS_STATE_SLEEP_CFM) + || adapter->tx_lock_flag) + continue; + + if (!adapter->cmd_sent && !adapter->curr_cmd) { + if (mwifiex_exec_next_cmd(adapter) == -1) { + ret = -1; + break; + } + } + + if (!adapter->scan_processing && !adapter->data_sent && + !mwifiex_wmm_lists_empty(adapter)) { + mwifiex_wmm_process_tx(adapter); + if (adapter->hs_activated) { + adapter->is_hs_configured = false; + mwifiex_hs_activated_event + (mwifiex_get_priv + (adapter, MWIFIEX_BSS_ROLE_ANY), + false); + } + } + + if (adapter->delay_null_pkt && !adapter->cmd_sent && + !adapter->curr_cmd && !is_command_pending(adapter) + && mwifiex_wmm_lists_empty(adapter)) { + if (!mwifiex_send_null_packet + (mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), + MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET | + MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) { + adapter->delay_null_pkt = false; + adapter->ps_state = PS_STATE_SLEEP; + } + break; + } + } while (true); + + if ((adapter->int_status) || IS_CARD_RX_RCVD(adapter)) + goto process_start; + + spin_lock_irqsave(&adapter->main_proc_lock, flags); + adapter->mwifiex_processing = false; + spin_unlock_irqrestore(&adapter->main_proc_lock, flags); + +exit_main_proc: + if (adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) + mwifiex_shutdown_drv(adapter); + return ret; +} + +/* + * This function initializes the software. + * + * The main work includes allocating and initializing the adapter structure + * and initializing the private structures. + */ +static int +mwifiex_init_sw(void *card, struct mwifiex_if_ops *if_ops, void **pmwifiex) +{ + int i; + struct mwifiex_device device; + struct mwifiex_drv_mode *drv_mode_ptr; + + /* find mwifiex_drv_mode entry from mwifiex_drv_mode_tbl */ + drv_mode_ptr = NULL; + for (i = 0; i < ARRAY_SIZE(mwifiex_drv_mode_tbl); i++) { + if (mwifiex_drv_mode_tbl[i].drv_mode == drv_mode) { + drv_mode_ptr = &mwifiex_drv_mode_tbl[i]; + break; + } + } + + if (!drv_mode_ptr) { + pr_err("invalid drv_mode=%d\n", drv_mode); + return -1; + } + + memset(&device, 0, sizeof(struct mwifiex_device)); + + for (i = 0; i < drv_mode_ptr->intf_num; i++) { + device.bss_attr[i].bss_type = + drv_mode_ptr->bss_attr[i].bss_type; + device.bss_attr[i].frame_type = + drv_mode_ptr->bss_attr[i].frame_type; + device.bss_attr[i].active = drv_mode_ptr->bss_attr[i].active; + device.bss_attr[i].bss_priority = + drv_mode_ptr->bss_attr[i].bss_priority; + device.bss_attr[i].bss_num = drv_mode_ptr->bss_attr[i].bss_num; + } + + if (mwifiex_register(card, if_ops, &device, pmwifiex)) + return -1; + + return 0; +} + +/* + * This function frees the adapter structure. + * + * Additionally, this closes the netlink socket, frees the timers + * and private structures. + */ +static void mwifiex_free_adapter(struct mwifiex_adapter *adapter) +{ + if (!adapter) { + pr_err("%s: adapter is NULL\n", __func__); + return; + } + + mwifiex_unregister(adapter); + pr_debug("info: %s: free adapter\n", __func__); +} + +/* + * This function initializes the hardware and firmware. + * + * The main initialization steps followed are - + * - Download the correct firmware to card + * - Allocate and initialize the adapter structure + * - Initialize the private structures + * - Issue the init commands to firmware + */ +static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter) +{ + int ret = 0; + int err; + struct mwifiex_fw_image fw; + + memset(&fw, 0, sizeof(struct mwifiex_fw_image)); + + switch (adapter->revision_id) { + case SD8787_W0: + case SD8787_W1: + strcpy(fw_name, SD8787_W1_FW_NAME); + break; + case SD8787_A0: + case SD8787_A1: + strcpy(fw_name, SD8787_AX_FW_NAME); + break; + default: + break; + } + + err = request_firmware(&adapter->firmware, fw_name, adapter->dev); + if (err < 0) { + dev_err(adapter->dev, "request_firmware() returned" + " error code %#x\n", err); + ret = -1; + goto done; + } + fw.fw_buf = (u8 *) adapter->firmware->data; + fw.fw_len = adapter->firmware->size; + + ret = mwifiex_dnld_fw(adapter, &fw); + if (ret == -1) + goto done; + + dev_notice(adapter->dev, "WLAN FW is active\n"); + + adapter->init_wait_q_woken = false; + ret = mwifiex_init_fw(adapter); + if (ret == -1) { + goto done; + } else if (!ret) { + adapter->hw_status = MWIFIEX_HW_STATUS_READY; + goto done; + } + /* Wait for mwifiex_init to complete */ + wait_event_interruptible(adapter->init_wait_q, + adapter->init_wait_q_woken); + if (adapter->hw_status != MWIFIEX_HW_STATUS_READY) { + ret = -1; + goto done; + } + ret = 0; + +done: + if (adapter->firmware) + release_firmware(adapter->firmware); + if (ret) + ret = -1; + return ret; +} + +/* + * This function fills a driver buffer. + * + * The function associates a given SKB with the provided driver buffer + * and also updates some of the SKB parameters, including IP header, + * priority and timestamp. + */ +static void +mwifiex_fill_buffer(struct sk_buff *skb) +{ + struct ethhdr *eth = NULL; + struct iphdr *iph; + struct timeval tv; + u8 tid = 0; + + eth = (struct ethhdr *) skb->data; + switch (eth->h_proto) { + case __constant_htons(ETH_P_IP): + iph = ip_hdr(skb); + tid = IPTOS_PREC(iph->tos); + pr_debug("data: packet type ETH_P_IP: %04x, tid=%#x prio=%#x\n", + eth->h_proto, tid, skb->priority); + break; + case __constant_htons(ETH_P_ARP): + pr_debug("data: ARP packet: %04x\n", eth->h_proto); + default: + break; + } +/* Offset for TOS field in the IP header */ +#define IPTOS_OFFSET 5 + tid = (tid >> IPTOS_OFFSET); + skb->priority = tid; + /* Record the current time the packet was queued; used to + determine the amount of time the packet was queued in + the driver before it was sent to the firmware. + The delay is then sent along with the packet to the + firmware for aggregate delay calculation for stats and + MSDU lifetime expiry. + */ + do_gettimeofday(&tv); + skb->tstamp = timeval_to_ktime(tv); + return; +} + +/* + * CFG802.11 network device handler for open. + * + * Starts the data queue. + */ +static int +mwifiex_open(struct net_device *dev) +{ + netif_start_queue(dev); + return 0; +} + +/* + * CFG802.11 network device handler for close. + */ +static int +mwifiex_close(struct net_device *dev) +{ + return 0; +} + +/* + * CFG802.11 network device handler for data transmission. + */ +static int +mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + struct sk_buff *new_skb = NULL; + struct mwifiex_txinfo *tx_info; + + dev_dbg(priv->adapter->dev, "data: %lu BSS(%d): Data <= kernel\n", + jiffies, priv->bss_index); + + if (priv->adapter->surprise_removed) { + kfree(skb); + priv->stats.tx_dropped++; + return 0; + } + if (!skb->len || (skb->len > ETH_FRAME_LEN)) { + dev_err(priv->adapter->dev, "Tx: bad skb len %d\n", skb->len); + kfree(skb); + priv->stats.tx_dropped++; + return 0; + } + if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) { + dev_dbg(priv->adapter->dev, + "data: Tx: insufficient skb headroom %d\n", + skb_headroom(skb)); + /* Insufficient skb headroom - allocate a new skb */ + new_skb = + skb_realloc_headroom(skb, MWIFIEX_MIN_DATA_HEADER_LEN); + if (unlikely(!new_skb)) { + dev_err(priv->adapter->dev, "Tx: cannot alloca new_skb\n"); + kfree(skb); + priv->stats.tx_dropped++; + return 0; + } + kfree_skb(skb); + skb = new_skb; + dev_dbg(priv->adapter->dev, "info: new skb headroomd %d\n", + skb_headroom(skb)); + } + + tx_info = MWIFIEX_SKB_TXCB(skb); + tx_info->bss_index = priv->bss_index; + mwifiex_fill_buffer(skb); + + mwifiex_wmm_add_buf_txqueue(priv->adapter, skb); + atomic_inc(&priv->adapter->tx_pending); + + if (atomic_read(&priv->adapter->tx_pending) >= MAX_TX_PENDING) { + netif_stop_queue(priv->netdev); + dev->trans_start = jiffies; + } + + queue_work(priv->adapter->workqueue, &priv->adapter->main_work); + + return 0; +} + +/* + * CFG802.11 network device handler for setting MAC address. + */ +static int +mwifiex_set_mac_address(struct net_device *dev, void *addr) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + struct sockaddr *hw_addr = (struct sockaddr *) addr; + + memcpy(priv->curr_addr, hw_addr->sa_data, ETH_ALEN); + + if (mwifiex_request_set_mac_address(priv)) { + dev_err(priv->adapter->dev, "set MAC address failed\n"); + return -EFAULT; + } + memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN); + + return 0; +} + +/* + * CFG802.11 network device handler for setting multicast list. + */ +static void mwifiex_set_multicast_list(struct net_device *dev) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + mwifiex_request_set_multicast_list(priv, dev); +} + +/* + * CFG802.11 network device handler for transmission timeout. + */ +static void +mwifiex_tx_timeout(struct net_device *dev) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + + dev_err(priv->adapter->dev, "%lu : Tx timeout, bss_index=%d\n", + jiffies, priv->bss_index); + dev->trans_start = jiffies; + priv->num_tx_timeout++; +} + +/* + * CFG802.11 network device handler for statistics retrieval. + */ +static struct net_device_stats *mwifiex_get_stats(struct net_device *dev) +{ + struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev); + + return &priv->stats; +} + +/* Network device handlers */ +static const struct net_device_ops mwifiex_netdev_ops = { + .ndo_open = mwifiex_open, + .ndo_stop = mwifiex_close, + .ndo_start_xmit = mwifiex_hard_start_xmit, + .ndo_set_mac_address = mwifiex_set_mac_address, + .ndo_tx_timeout = mwifiex_tx_timeout, + .ndo_get_stats = mwifiex_get_stats, + .ndo_set_multicast_list = mwifiex_set_multicast_list, +}; + +/* + * This function initializes the private structure parameters. + * + * The following wait queues are initialized - + * - IOCTL wait queue + * - Command wait queue + * - Statistics wait queue + * + * ...and the following default parameters are set - + * - Current key index : Set to 0 + * - Rate index : Set to auto + * - Media connected : Set to disconnected + * - Adhoc link sensed : Set to false + * - Nick name : Set to null + * - Number of Tx timeout : Set to 0 + * - Device address : Set to current address + * + * In addition, the CFG80211 work queue is also created. + */ +static void +mwifiex_init_priv_params(struct mwifiex_private *priv, struct net_device *dev) +{ + dev->netdev_ops = &mwifiex_netdev_ops; + /* Initialize private structure */ + init_waitqueue_head(&priv->ioctl_wait_q); + init_waitqueue_head(&priv->cmd_wait_q); + init_waitqueue_head(&priv->w_stats_wait_q); + priv->current_key_index = 0; + priv->media_connected = false; + memset(&priv->nick_name, 0, sizeof(priv->nick_name)); + priv->num_tx_timeout = 0; + priv->workqueue = create_singlethread_workqueue("cfg80211_wq"); + INIT_WORK(&priv->cfg_workqueue, mwifiex_cfg80211_results); + memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN); +} + +/* + * This function adds a new logical interface. + * + * It allocates, initializes and registers the interface by performing + * the following opearations - + * - Allocate a new net device structure + * - Assign device name + * - Register the new device with CFG80211 subsystem + * - Initialize semaphore and private structure + * - Register the new device with kernel + * - Create the complete debug FS structure if configured + */ +static struct mwifiex_private *mwifiex_add_interface( + struct mwifiex_adapter *adapter, + u8 bss_index, u8 bss_type) +{ + struct net_device *dev = NULL; + struct mwifiex_private *priv = NULL; + void *mdev_priv = NULL; + + dev = alloc_netdev_mq(sizeof(struct mwifiex_private *), "mlan%d", + ether_setup, 1); + if (!dev) { + dev_err(adapter->dev, "no memory available for netdevice\n"); + goto error; + } + if (dev_alloc_name(dev, dev->name)) { + dev_err(adapter->dev, "unable to alloc name for netdevice\n"); + goto error; + } + + if (mwifiex_register_cfg80211(dev, adapter->priv[bss_index]->curr_addr, + adapter->priv[bss_index]) != 0) { + dev_err(adapter->dev, "cannot register netdevice with cfg80211\n"); + goto error; + } + /* Save the priv pointer in netdev */ + priv = adapter->priv[bss_index]; + mdev_priv = netdev_priv(dev); + *((unsigned long *) mdev_priv) = (unsigned long) priv; + + priv->netdev = dev; + + sema_init(&priv->async_sem, 1); + priv->scan_pending_on_block = false; + + mwifiex_init_priv_params(priv, dev); + + SET_NETDEV_DEV(dev, adapter->dev); + + /* Register network device */ + if (register_netdev(dev)) { + dev_err(adapter->dev, "cannot register virtual network device\n"); + goto error; + } + + dev_dbg(adapter->dev, "info: %s: Marvell 802.11 Adapter\n", dev->name); +#ifdef CONFIG_DEBUG_FS + mwifiex_dev_debugfs_init(priv); +#endif + return priv; +error: + if (dev) + free_netdev(dev); + return NULL; +} + +/* + * This function removes a logical interface. + * + * It deregisters, resets and frees the interface by performing + * the following operations - + * - Disconnect the device if connected, send wireless event to + * notify applications. + * - Remove the debug FS structure if configured + * - Unregister the device from kernel + * - Free the net device structure + * - Cancel all works and destroy work queue + * - Unregister and free the wireless device from CFG80211 subsystem + */ +static void +mwifiex_remove_interface(struct mwifiex_adapter *adapter, u8 bss_index) +{ + struct net_device *dev = NULL; + struct mwifiex_private *priv = adapter->priv[bss_index]; + + if (!priv) + return; + dev = priv->netdev; + + if (priv->media_connected) + priv->media_connected = false; + +#ifdef CONFIG_DEBUG_FS + mwifiex_dev_debugfs_remove(priv); +#endif + /* Last reference is our one */ + dev_dbg(adapter->dev, "info: %s: refcnt = %d\n", + dev->name, netdev_refcnt_read(dev)); + + if (dev->reg_state == NETREG_REGISTERED) + unregister_netdev(dev); + + /* Clear the priv in adapter */ + priv->netdev = NULL; + if (dev) + free_netdev(dev); + + cancel_work_sync(&priv->cfg_workqueue); + flush_workqueue(priv->workqueue); + destroy_workqueue(priv->workqueue); + wiphy_unregister(priv->wdev->wiphy); + wiphy_free(priv->wdev->wiphy); + kfree(priv->wdev); + + return; +} + +/* + * Sends IOCTL request to shutdown firmware. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_shutdown_fw(struct mwifiex_private *priv, u8 wait_option) +{ + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + + /* Allocate an IOCTL request buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_misc_ioctl_init_shutdown(priv->adapter, wait, + MWIFIEX_FUNC_SHUTDOWN); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + + kfree(wait); + return status; +} +EXPORT_SYMBOL_GPL(mwifiex_shutdown_fw); + +/* + * This function check if command is pending. + */ +int is_command_pending(struct mwifiex_adapter *adapter) +{ + unsigned long flags; + int is_cmd_pend_q_empty; + + spin_lock_irqsave(&adapter->cmd_pending_q_lock, flags); + is_cmd_pend_q_empty = list_empty(&adapter->cmd_pending_q); + spin_unlock_irqrestore(&adapter->cmd_pending_q_lock, flags); + + return !is_cmd_pend_q_empty; +} + +/* + * This function returns the correct private structure pointer based + * upon the BSS number. + */ +struct mwifiex_private * +mwifiex_bss_index_to_priv(struct mwifiex_adapter *adapter, u8 bss_index) +{ + if (!adapter || (bss_index >= adapter->priv_num)) + return NULL; + return adapter->priv[bss_index]; +} + +/* + * This is the main work queue function. + * + * It handles the main process, which in turn handles the complete + * driver operations. + */ +static void mwifiex_main_work_queue(struct work_struct *work) +{ + struct mwifiex_adapter *adapter = + container_of(work, struct mwifiex_adapter, main_work); + + if (adapter->surprise_removed) + return; + mwifiex_main_process(adapter); +} + +/* + * This function cancels all works in the queue and destroys + * the main workqueue. + */ +static void +mwifiex_terminate_workqueue(struct mwifiex_adapter *adapter) +{ + flush_workqueue(adapter->workqueue); + destroy_workqueue(adapter->workqueue); + adapter->workqueue = NULL; +} + +/* + * This function adds the card. + * + * This function follows the following major steps to set up the device - + * - Initialize software. This includes probing the card, registering + * the interface operations table, and allocating/initializing the + * adapter structure + * - Set up the netlink socket + * - Create and start the main work queue + * - Register the device + * - Initialize firmware and hardware + * - Add logical interfaces + */ +int +mwifiex_add_card(void *card, struct semaphore *sem, + struct mwifiex_if_ops *if_ops) +{ + int status = 0; + int i; + struct mwifiex_adapter *adapter = NULL; + struct mwifiex_drv_mode *drv_mode_info = &mwifiex_drv_mode_tbl[0]; + + if (down_interruptible(sem)) + goto exit_sem_err; + + if (mwifiex_init_sw(card, if_ops, (void **) &adapter)) { + pr_err("%s: software init failed\n", __func__); + goto err_init_sw; + } + + adapter->drv_mode = drv_mode_info; + + adapter->hw_status = MWIFIEX_HW_STATUS_INITIALIZING; + /* PnP and power profile */ + adapter->surprise_removed = false; + init_waitqueue_head(&adapter->init_wait_q); + adapter->is_suspended = false; + adapter->hs_activated = false; + init_waitqueue_head(&adapter->hs_activate_wait_q); + + /* Create workqueue */ + adapter->workqueue = create_workqueue("MWIFIEX_WORK_QUEUE"); + if (!adapter->workqueue) + goto err_kmalloc; + + INIT_WORK(&adapter->main_work, mwifiex_main_work_queue); + + /* Register the device. Fill up the private data structure with relevant + information from the card and request for the required IRQ. */ + if (adapter->if_ops.register_dev(adapter)) { + pr_err("%s: failed to register mwifiex device\n", __func__); + goto err_registerdev; + } + + /* Init FW and HW */ + if (mwifiex_init_hw_fw(adapter)) { + pr_err("%s: firmware init failed\n", __func__); + goto err_init_fw; + } + /* Add interfaces */ + for (i = 0; i < drv_mode_info->intf_num; i++) { + if (!mwifiex_add_interface(adapter, i, + adapter->drv_mode->bss_attr[i].bss_type)) { + status = -1; + break; + } + } + if (status) + goto err_add_intf; + + up(sem); + + return 0; + +err_add_intf: + for (i = 0; i < adapter->priv_num; i++) + mwifiex_remove_interface(adapter, i); +err_init_fw: + /* Unregister device */ + pr_debug("info: %s: unregister device\n", __func__); + adapter->if_ops.unregister_dev(adapter); +err_registerdev: + adapter->surprise_removed = true; + mwifiex_terminate_workqueue(adapter); +err_kmalloc: + if ((adapter->hw_status == MWIFIEX_HW_STATUS_FW_READY) || + (adapter->hw_status == MWIFIEX_HW_STATUS_READY)) { + pr_debug("info: %s: shutdown mwifiex\n", __func__); + adapter->init_wait_q_woken = false; + status = mwifiex_shutdown_drv(adapter); + if (status == -EINPROGRESS) + wait_event_interruptible(adapter->init_wait_q, + adapter->init_wait_q_woken); + } + + mwifiex_free_adapter(adapter); + +err_init_sw: + up(sem); + +exit_sem_err: + return -1; +} +EXPORT_SYMBOL_GPL(mwifiex_add_card); + +/* + * This function removes the card. + * + * This function follows the following major steps to remove the device - + * - Stop data traffic + * - Shutdown firmware + * - Remove the logical interfaces + * - Terminate the work queue + * - Unregister the device + * - Free the adapter structure + */ +int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem) +{ + struct mwifiex_private *priv = NULL; + int status; + int i; + + if (down_interruptible(sem)) + goto exit_sem_err; + + if (!adapter) + goto exit_remove; + + adapter->surprise_removed = true; + + /* Stop data */ + for (i = 0; i < adapter->priv_num; i++) { + priv = adapter->priv[i]; + if (priv) { + if (!netif_queue_stopped(priv->netdev)) + netif_stop_queue(priv->netdev); + if (netif_carrier_ok(priv->netdev)) + netif_carrier_off(priv->netdev); + } + } + + dev_dbg(adapter->dev, "cmd: calling mwifiex_shutdown_drv...\n"); + adapter->init_wait_q_woken = false; + status = mwifiex_shutdown_drv(adapter); + if (status == -EINPROGRESS) + wait_event_interruptible(adapter->init_wait_q, + adapter->init_wait_q_woken); + dev_dbg(adapter->dev, "cmd: mwifiex_shutdown_drv done\n"); + if (atomic_read(&adapter->rx_pending) || + atomic_read(&adapter->tx_pending) || + atomic_read(&adapter->ioctl_pending)) { + dev_err(adapter->dev, "rx_pending=%d, tx_pending=%d, " + "ioctl_pending=%d\n", + atomic_read(&adapter->rx_pending), + atomic_read(&adapter->tx_pending), + atomic_read(&adapter->ioctl_pending)); + } + + /* Remove interface */ + for (i = 0; i < adapter->priv_num; i++) + mwifiex_remove_interface(adapter, i); + + mwifiex_terminate_workqueue(adapter); + + /* Unregister device */ + dev_dbg(adapter->dev, "info: unregister device\n"); + adapter->if_ops.unregister_dev(adapter); + /* Free adapter structure */ + dev_dbg(adapter->dev, "info: free adapter\n"); + mwifiex_free_adapter(adapter); + +exit_remove: + up(sem); +exit_sem_err: + return 0; +} +EXPORT_SYMBOL_GPL(mwifiex_remove_card); + +/* + * This function initializes the module. + * + * The debug FS is also initialized if configured. + */ +static int +mwifiex_init_module(void) +{ +#ifdef CONFIG_DEBUG_FS + mwifiex_debugfs_init(); +#endif + return 0; +} + +/* + * This function cleans up the module. + * + * The debug FS is removed if available. + */ +static void +mwifiex_cleanup_module(void) +{ +#ifdef CONFIG_DEBUG_FS + mwifiex_debugfs_remove(); +#endif +} + +module_init(mwifiex_init_module); +module_exit(mwifiex_cleanup_module); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell WiFi-Ex Driver version " VERSION); +MODULE_VERSION(VERSION); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h new file mode 100644 index 000000000000..43ff149de9db --- /dev/null +++ b/drivers/net/wireless/mwifiex/main.h @@ -0,0 +1,1058 @@ +/* + * Marvell Wireless LAN device driver: major data structures and prototypes + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_MAIN_H_ +#define _MWIFIEX_MAIN_H_ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/semaphore.h> +#include <linux/ip.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <net/sock.h> +#include <net/lib80211.h> +#include <linux/firmware.h> +#include <linux/ctype.h> + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" + +extern const char driver_version[]; +extern struct mwifiex_adapter *g_adapter; + +enum { + MWIFIEX_NO_WAIT, + MWIFIEX_IOCTL_WAIT, + MWIFIEX_CMD_WAIT, + MWIFIEX_PROC_WAIT, + MWIFIEX_WSTATS_WAIT +}; + +#define DRV_MODE_STA 0x1 + +#define SD8787_W0 0x30 +#define SD8787_W1 0x31 +#define SD8787_A0 0x40 +#define SD8787_A1 0x41 + +#define DEFAULT_FW_NAME "mrvl/sd8787_uapsta.bin" +#define SD8787_W1_FW_NAME "mrvl/sd8787_uapsta_w1.bin" +#define SD8787_AX_FW_NAME "mrvl/sd8787_uapsta.bin" + +struct mwifiex_drv_mode { + u16 drv_mode; + u16 intf_num; + struct mwifiex_bss_attr *bss_attr; +}; + + +#define MWIFIEX_DEFAULT_WATCHDOG_TIMEOUT (5 * HZ) + +#define MWIFIEX_TIMER_10S 10000 +#define MWIFIEX_TIMER_1S 1000 + +#define MAX_TX_PENDING 60 + +#define MWIFIEX_UPLD_SIZE (2312) + +#define MAX_EVENT_SIZE 1024 + +#define ARP_FILTER_MAX_BUF_SIZE 68 + +#define MWIFIEX_KEY_BUFFER_SIZE 16 +#define MWIFIEX_DEFAULT_LISTEN_INTERVAL 10 +#define MWIFIEX_MAX_REGION_CODE 7 + +#define DEFAULT_BCN_AVG_FACTOR 8 +#define DEFAULT_DATA_AVG_FACTOR 8 + +#define FIRST_VALID_CHANNEL 0xff +#define DEFAULT_AD_HOC_CHANNEL 6 +#define DEFAULT_AD_HOC_CHANNEL_A 36 + +#define DEFAULT_BCN_MISS_TIMEOUT 5 + +#define MAX_SCAN_BEACON_BUFFER 8000 + +#define SCAN_BEACON_ENTRY_PAD 6 + +#define MWIFIEX_PASSIVE_SCAN_CHAN_TIME 200 +#define MWIFIEX_ACTIVE_SCAN_CHAN_TIME 200 +#define MWIFIEX_SPECIFIC_SCAN_CHAN_TIME 110 + +#define SCAN_RSSI(RSSI) (0x100 - ((u8)(RSSI))) + +#define MWIFIEX_MAX_TOTAL_SCAN_TIME (MWIFIEX_TIMER_10S - MWIFIEX_TIMER_1S) + +#define RSN_GTK_OUI_OFFSET 2 + +#define MWIFIEX_OUI_NOT_PRESENT 0 +#define MWIFIEX_OUI_PRESENT 1 + +#define IS_CARD_RX_RCVD(adapter) (adapter->cmd_resp_received || \ + adapter->event_received || \ + adapter->data_received) + +#define MWIFIEX_TYPE_CMD 1 +#define MWIFIEX_TYPE_DATA 0 +#define MWIFIEX_TYPE_EVENT 3 + +#define DBG_CMD_NUM 5 + +#define MAX_BITMAP_RATES_SIZE 10 + +#define MAX_CHANNEL_BAND_BG 14 + +#define MAX_FREQUENCY_BAND_BG 2484 + +struct mwifiex_dbg { + u32 num_cmd_host_to_card_failure; + u32 num_cmd_sleep_cfm_host_to_card_failure; + u32 num_tx_host_to_card_failure; + u32 num_event_deauth; + u32 num_event_disassoc; + u32 num_event_link_lost; + u32 num_cmd_deauth; + u32 num_cmd_assoc_success; + u32 num_cmd_assoc_failure; + u32 num_tx_timeout; + u32 num_cmd_timeout; + u16 timeout_cmd_id; + u16 timeout_cmd_act; + u16 last_cmd_id[DBG_CMD_NUM]; + u16 last_cmd_act[DBG_CMD_NUM]; + u16 last_cmd_index; + u16 last_cmd_resp_id[DBG_CMD_NUM]; + u16 last_cmd_resp_index; + u16 last_event[DBG_CMD_NUM]; + u16 last_event_index; +}; + +enum MWIFIEX_HARDWARE_STATUS { + MWIFIEX_HW_STATUS_READY, + MWIFIEX_HW_STATUS_INITIALIZING, + MWIFIEX_HW_STATUS_FW_READY, + MWIFIEX_HW_STATUS_INIT_DONE, + MWIFIEX_HW_STATUS_RESET, + MWIFIEX_HW_STATUS_CLOSING, + MWIFIEX_HW_STATUS_NOT_READY +}; + +enum MWIFIEX_802_11_POWER_MODE { + MWIFIEX_802_11_POWER_MODE_CAM, + MWIFIEX_802_11_POWER_MODE_PSP +}; + +struct mwifiex_tx_param { + u32 next_pkt_len; +}; + +enum MWIFIEX_PS_STATE { + PS_STATE_AWAKE, + PS_STATE_PRE_SLEEP, + PS_STATE_SLEEP_CFM, + PS_STATE_SLEEP +}; + +struct mwifiex_add_ba_param { + u32 tx_win_size; + u32 rx_win_size; + u32 timeout; +}; + +struct mwifiex_tx_aggr { + u8 ampdu_user; + u8 ampdu_ap; + u8 amsdu; +}; + +struct mwifiex_ra_list_tbl { + struct list_head list; + struct sk_buff_head skb_head; + u8 ra[ETH_ALEN]; + u32 total_pkts_size; + u32 is_11n_enabled; +}; + +struct mwifiex_tid_tbl { + struct list_head ra_list; + /* spin lock for tid table */ + spinlock_t tid_tbl_lock; + struct mwifiex_ra_list_tbl *ra_list_curr; +}; + +#define WMM_HIGHEST_PRIORITY 7 +#define HIGH_PRIO_TID 7 +#define LOW_PRIO_TID 0 + +struct mwifiex_wmm_desc { + struct mwifiex_tid_tbl tid_tbl_ptr[MAX_NUM_TID]; + u32 packets_out[MAX_NUM_TID]; + /* spin lock to protect ra_list */ + spinlock_t ra_list_spinlock; + struct mwifiex_wmm_ac_status ac_status[IEEE80211_MAX_QUEUES]; + enum mwifiex_wmm_ac_e ac_down_graded_vals[IEEE80211_MAX_QUEUES]; + u32 drv_pkt_delay_max; + u8 queue_priority[IEEE80211_MAX_QUEUES]; + u32 user_pri_pkt_tx_ctrl[WMM_HIGHEST_PRIORITY + 1]; /* UP: 0 to 7 */ + +}; + +struct mwifiex_802_11_security { + u8 wpa_enabled; + u8 wpa2_enabled; + u8 wapi_enabled; + u8 wapi_key_on; + enum MWIFIEX_802_11_WEP_STATUS wep_status; + u32 authentication_mode; + u32 encryption_mode; +}; + +struct ieee_types_header { + u8 element_id; + u8 len; +} __packed; + +struct ieee_obss_scan_param { + u16 obss_scan_passive_dwell; + u16 obss_scan_active_dwell; + u16 bss_chan_width_trigger_scan_int; + u16 obss_scan_passive_total; + u16 obss_scan_active_total; + u16 bss_width_chan_trans_delay; + u16 obss_scan_active_threshold; +} __packed; + +struct ieee_types_obss_scan_param { + struct ieee_types_header ieee_hdr; + struct ieee_obss_scan_param obss_scan; +} __packed; + +#define MWIFIEX_SUPPORTED_RATES 14 + +#define MWIFIEX_SUPPORTED_RATES_EXT 32 + +#define IEEE_MAX_IE_SIZE 256 + +struct ieee_types_vendor_specific { + struct ieee_types_vendor_header vend_hdr; + u8 data[IEEE_MAX_IE_SIZE - sizeof(struct ieee_types_vendor_header)]; +} __packed; + +struct ieee_types_generic { + struct ieee_types_header ieee_hdr; + u8 data[IEEE_MAX_IE_SIZE - sizeof(struct ieee_types_header)]; +} __packed; + +struct mwifiex_bssdescriptor { + u8 mac_address[ETH_ALEN]; + struct mwifiex_802_11_ssid ssid; + u32 privacy; + s32 rssi; + u32 channel; + u32 freq; + u16 beacon_period; + u8 erp_flags; + u32 bss_mode; + u8 supported_rates[MWIFIEX_SUPPORTED_RATES]; + u8 data_rates[MWIFIEX_SUPPORTED_RATES]; + /* Network band. + * BAND_B(0x01): 'b' band + * BAND_G(0x02): 'g' band + * BAND_A(0X04): 'a' band + */ + u16 bss_band; + long long network_tsf; + u8 time_stamp[8]; + union ieee_types_phy_param_set phy_param_set; + union ieee_types_ss_param_set ss_param_set; + u16 cap_info_bitmap; + struct ieee_types_wmm_parameter wmm_ie; + u8 disable_11n; + struct ieee80211_ht_cap *bcn_ht_cap; + u16 ht_cap_offset; + struct ieee80211_ht_info *bcn_ht_info; + u16 ht_info_offset; + u8 *bcn_bss_co_2040; + u16 bss_co_2040_offset; + u8 *bcn_ext_cap; + u16 ext_cap_offset; + struct ieee_types_obss_scan_param *bcn_obss_scan; + u16 overlap_bss_offset; + struct ieee_types_vendor_specific *bcn_wpa_ie; + u16 wpa_offset; + struct ieee_types_generic *bcn_rsn_ie; + u16 rsn_offset; + struct ieee_types_generic *bcn_wapi_ie; + u16 wapi_offset; + u8 *beacon_buf; + u32 beacon_buf_size; + u32 beacon_buf_size_max; + +}; + +struct mwifiex_current_bss_params { + struct mwifiex_bssdescriptor bss_descriptor; + u8 wmm_enabled; + u8 wmm_uapsd_enabled; + u8 band; + u32 num_of_rates; + u8 data_rates[MWIFIEX_SUPPORTED_RATES]; +}; + +struct mwifiex_sleep_params { + u16 sp_error; + u16 sp_offset; + u16 sp_stable_time; + u8 sp_cal_control; + u8 sp_ext_sleep_clk; + u16 sp_reserved; +}; + +struct mwifiex_sleep_period { + u16 period; + u16 reserved; +}; + +struct mwifiex_wep_key { + u32 length; + u32 key_index; + u32 key_length; + u8 key_material[MWIFIEX_KEY_BUFFER_SIZE]; +}; + +#define MAX_REGION_CHANNEL_NUM 2 + +struct mwifiex_chan_freq_power { + u16 channel; + u32 freq; + u16 max_tx_power; + u8 unsupported; +}; + +enum state_11d_t { + DISABLE_11D = 0, + ENABLE_11D = 1, +}; + +#define MWIFIEX_MAX_TRIPLET_802_11D 83 + +struct mwifiex_802_11d_domain_reg { + u8 country_code[IEEE80211_COUNTRY_STRING_LEN]; + u8 no_of_triplet; + struct ieee80211_country_ie_triplet + triplet[MWIFIEX_MAX_TRIPLET_802_11D]; +}; + +struct mwifiex_vendor_spec_cfg_ie { + u16 mask; + u16 flag; + u8 ie[MWIFIEX_MAX_VSIE_LEN]; +}; + +struct wps { + u8 session_enable; +}; + +struct mwifiex_adapter; +struct mwifiex_private; + +struct mwifiex_private { + struct mwifiex_adapter *adapter; + u8 bss_index; + u8 bss_type; + u8 bss_role; + u8 bss_priority; + u8 bss_num; + u8 frame_type; + u8 curr_addr[ETH_ALEN]; + u8 media_connected; + u32 num_tx_timeout; + struct net_device *netdev; + struct net_device_stats stats; + u16 curr_pkt_filter; + u32 bss_mode; + u32 pkt_tx_ctrl; + u16 tx_power_level; + u8 max_tx_power_level; + u8 min_tx_power_level; + u8 tx_rate; + u8 tx_htinfo; + u8 rxpd_htinfo; + u8 rxpd_rate; + u16 rate_bitmap; + u16 bitmap_rates[MAX_BITMAP_RATES_SIZE]; + u32 data_rate; + u8 is_data_rate_auto; + u16 bcn_avg_factor; + u16 data_avg_factor; + s16 data_rssi_last; + s16 data_nf_last; + s16 data_rssi_avg; + s16 data_nf_avg; + s16 bcn_rssi_last; + s16 bcn_nf_last; + s16 bcn_rssi_avg; + s16 bcn_nf_avg; + struct mwifiex_bssdescriptor *attempted_bss_desc; + struct mwifiex_802_11_ssid prev_ssid; + u8 prev_bssid[ETH_ALEN]; + struct mwifiex_current_bss_params curr_bss_params; + u16 beacon_period; + u16 listen_interval; + u16 atim_window; + u8 adhoc_channel; + u8 adhoc_is_link_sensed; + u8 adhoc_state; + struct mwifiex_802_11_security sec_info; + struct mwifiex_wep_key wep_key[NUM_WEP_KEYS]; + u16 wep_key_curr_index; + u8 wpa_ie[256]; + u8 wpa_ie_len; + u8 wpa_is_gtk_set; + struct host_cmd_ds_802_11_key_material aes_key; + u8 wapi_ie[256]; + u8 wapi_ie_len; + u8 wmm_required; + u8 wmm_enabled; + u8 wmm_qosinfo; + struct mwifiex_wmm_desc wmm; + struct list_head tx_ba_stream_tbl_ptr; + /* spin lock for tx_ba_stream_tbl_ptr queue */ + spinlock_t tx_ba_stream_tbl_lock; + struct mwifiex_tx_aggr aggr_prio_tbl[MAX_NUM_TID]; + struct mwifiex_add_ba_param add_ba_param; + u16 rx_seq[MAX_NUM_TID]; + struct list_head rx_reorder_tbl_ptr; + /* spin lock for rx_reorder_tbl_ptr queue */ + spinlock_t rx_reorder_tbl_lock; + /* spin lock for Rx packets */ + spinlock_t rx_pkt_lock; + +#define MWIFIEX_ASSOC_RSP_BUF_SIZE 500 + u8 assoc_rsp_buf[MWIFIEX_ASSOC_RSP_BUF_SIZE]; + u32 assoc_rsp_size; + +#define MWIFIEX_GENIE_BUF_SIZE 256 + u8 gen_ie_buf[MWIFIEX_GENIE_BUF_SIZE]; + u8 gen_ie_buf_len; + + struct mwifiex_vendor_spec_cfg_ie vs_ie[MWIFIEX_MAX_VSIE_NUM]; + +#define MWIFIEX_ASSOC_TLV_BUF_SIZE 256 + u8 assoc_tlv_buf[MWIFIEX_ASSOC_TLV_BUF_SIZE]; + u8 assoc_tlv_buf_len; + + u8 *curr_bcn_buf; + u32 curr_bcn_size; + /* spin lock for beacon buffer */ + spinlock_t curr_bcn_buf_lock; + u16 ioctl_wait_q_woken; + wait_queue_head_t ioctl_wait_q; + u16 cmd_wait_q_woken; + wait_queue_head_t cmd_wait_q; + struct wireless_dev *wdev; + struct mwifiex_chan_freq_power cfp; + char version_str[128]; +#ifdef CONFIG_DEBUG_FS + struct dentry *dfs_dev_dir; +#endif + u8 nick_name[16]; + struct iw_statistics w_stats; + u16 w_stats_wait_q_woken; + wait_queue_head_t w_stats_wait_q; + u16 current_key_index; + struct semaphore async_sem; + u8 scan_pending_on_block; + u8 report_scan_result; + struct cfg80211_scan_request *scan_request; + int scan_result_status; + bool assoc_request; + u16 assoc_result; + bool ibss_join_request; + u16 ibss_join_result; + bool disconnect; + u8 cfg_bssid[6]; + struct workqueue_struct *workqueue; + struct work_struct cfg_workqueue; + u8 country_code[IEEE80211_COUNTRY_STRING_LEN]; + struct wps wps; + u8 scan_block; +}; + +enum mwifiex_ba_status { + BA_STREAM_NOT_SETUP = 0, + BA_STREAM_SETUP_INPROGRESS, + BA_STREAM_SETUP_COMPLETE +}; + +struct mwifiex_tx_ba_stream_tbl { + struct list_head list; + int tid; + u8 ra[ETH_ALEN]; + enum mwifiex_ba_status ba_status; +}; + +struct mwifiex_rx_reorder_tbl; + +struct reorder_tmr_cnxt { + struct timer_list timer; + struct mwifiex_rx_reorder_tbl *ptr; + struct mwifiex_private *priv; +}; + +struct mwifiex_rx_reorder_tbl { + struct list_head list; + int tid; + u8 ta[ETH_ALEN]; + int start_win; + int win_size; + void **rx_reorder_ptr; + struct reorder_tmr_cnxt timer_context; +}; + +struct mwifiex_bss_prio_node { + struct list_head list; + struct mwifiex_private *priv; +}; + +struct mwifiex_bss_prio_tbl { + struct list_head bss_prio_head; + /* spin lock for bss priority */ + spinlock_t bss_prio_lock; + struct mwifiex_bss_prio_node *bss_prio_cur; +}; + +struct cmd_ctrl_node { + struct list_head list; + struct mwifiex_private *priv; + u32 cmd_oid; + u32 cmd_flag; + struct sk_buff *cmd_skb; + struct sk_buff *resp_skb; + void *data_buf; + void *wq_buf; + struct sk_buff *skb; +}; + +struct mwifiex_if_ops { + int (*init_if) (struct mwifiex_adapter *); + void (*cleanup_if) (struct mwifiex_adapter *); + int (*check_fw_status) (struct mwifiex_adapter *, u32, int *); + int (*prog_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *); + int (*register_dev) (struct mwifiex_adapter *); + void (*unregister_dev) (struct mwifiex_adapter *); + int (*enable_int) (struct mwifiex_adapter *); + int (*process_int_status) (struct mwifiex_adapter *); + int (*host_to_card) (struct mwifiex_adapter *, u8, + u8 *payload, u32 pkt_len, + struct mwifiex_tx_param *); + int (*wakeup) (struct mwifiex_adapter *); + int (*wakeup_complete) (struct mwifiex_adapter *); + + void (*update_mp_end_port) (struct mwifiex_adapter *, u16); + void (*cleanup_mpa_buf) (struct mwifiex_adapter *); +}; + +struct mwifiex_adapter { + struct mwifiex_private *priv[MWIFIEX_MAX_BSS_NUM]; + u8 priv_num; + struct mwifiex_drv_mode *drv_mode; + const struct firmware *firmware; + struct device *dev; + bool surprise_removed; + u32 fw_release_number; + u32 revision_id; + u16 init_wait_q_woken; + wait_queue_head_t init_wait_q; + void *card; + struct mwifiex_if_ops if_ops; + atomic_t rx_pending; + atomic_t tx_pending; + atomic_t ioctl_pending; + struct workqueue_struct *workqueue; + struct work_struct main_work; + struct mwifiex_bss_prio_tbl bss_prio_tbl[MWIFIEX_MAX_BSS_NUM]; + /* spin lock for init/shutdown */ + spinlock_t mwifiex_lock; + /* spin lock for main process */ + spinlock_t main_proc_lock; + u32 mwifiex_processing; + u16 max_tx_buf_size; + u16 tx_buf_size; + u16 curr_tx_buf_size; + u32 ioport; + enum MWIFIEX_HARDWARE_STATUS hw_status; + u16 number_of_antenna; + u32 fw_cap_info; + /* spin lock for interrupt handling */ + spinlock_t int_lock; + u8 int_status; + u32 event_cause; + struct sk_buff *event_skb; + u8 upld_buf[MWIFIEX_UPLD_SIZE]; + u8 data_sent; + u8 cmd_sent; + u8 cmd_resp_received; + u8 event_received; + u8 data_received; + u16 seq_num; + struct cmd_ctrl_node *cmd_pool; + struct cmd_ctrl_node *curr_cmd; + /* spin lock for command */ + spinlock_t mwifiex_cmd_lock; + u32 num_cmd_timeout; + u16 last_init_cmd; + struct timer_list cmd_timer; + struct list_head cmd_free_q; + /* spin lock for cmd_free_q */ + spinlock_t cmd_free_q_lock; + struct list_head cmd_pending_q; + /* spin lock for cmd_pending_q */ + spinlock_t cmd_pending_q_lock; + struct list_head scan_pending_q; + /* spin lock for scan_pending_q */ + spinlock_t scan_pending_q_lock; + u32 scan_processing; + u16 region_code; + struct mwifiex_802_11d_domain_reg domain_reg; + struct mwifiex_bssdescriptor *scan_table; + u32 num_in_scan_table; + u16 scan_probes; + u32 scan_mode; + u16 specific_scan_time; + u16 active_scan_time; + u16 passive_scan_time; + u8 bcn_buf[MAX_SCAN_BEACON_BUFFER]; + u8 *bcn_buf_end; + u8 fw_bands; + u8 adhoc_start_band; + u8 config_bands; + struct mwifiex_chan_scan_param_set *scan_channels; + u8 tx_lock_flag; + struct mwifiex_sleep_params sleep_params; + struct mwifiex_sleep_period sleep_period; + u16 ps_mode; + u32 ps_state; + u8 need_to_wakeup; + u16 multiple_dtim; + u16 local_listen_interval; + u16 null_pkt_interval; + struct sk_buff *sleep_cfm; + u16 bcn_miss_time_out; + u16 adhoc_awake_period; + u8 is_deep_sleep; + u8 delay_null_pkt; + u16 delay_to_ps; + u16 enhanced_ps_mode; + u8 pm_wakeup_card_req; + u16 gen_null_pkt; + u16 pps_uapsd_mode; + u32 pm_wakeup_fw_try; + u8 is_hs_configured; + struct mwifiex_hs_config_param hs_cfg; + u8 hs_activated; + u16 hs_activate_wait_q_woken; + wait_queue_head_t hs_activate_wait_q; + bool is_suspended; + u8 event_body[MAX_EVENT_SIZE]; + u32 hw_dot_11n_dev_cap; + u8 hw_dev_mcs_support; + u8 adhoc_11n_enabled; + u8 chan_offset; + struct mwifiex_dbg dbg; + u8 arp_filter[ARP_FILTER_MAX_BUF_SIZE]; + u32 arp_filter_size; +}; + +int mwifiex_init_lock_list(struct mwifiex_adapter *adapter); +void mwifiex_free_lock_list(struct mwifiex_adapter *adapter); + +int mwifiex_init_fw(struct mwifiex_adapter *adapter); + +int mwifiex_init_fw_complete(struct mwifiex_adapter *adapter); + +int mwifiex_shutdown_drv(struct mwifiex_adapter *adapter); + +int mwifiex_shutdown_fw_complete(struct mwifiex_adapter *adapter); + +int mwifiex_dnld_fw(struct mwifiex_adapter *, struct mwifiex_fw_image *); + +int mwifiex_recv_complete(struct mwifiex_adapter *, + struct sk_buff *skb, + int status); + +int mwifiex_recv_packet(struct mwifiex_adapter *, struct sk_buff *skb); + +int mwifiex_process_event(struct mwifiex_adapter *adapter); + +int mwifiex_ioctl_complete(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *ioctl_wq, + int status); + +int mwifiex_prepare_cmd(struct mwifiex_private *priv, + uint16_t cmd_no, + u16 cmd_action, + u32 cmd_oid, + void *wait_queue, void *data_buf); + +void mwifiex_cmd_timeout_func(unsigned long function_context); + +int mwifiex_misc_ioctl_init_shutdown(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait_queue, + u32 func_init_shutdown); +int mwifiex_get_debug_info(struct mwifiex_private *, + struct mwifiex_debug_info *); + +int mwifiex_alloc_cmd_buffer(struct mwifiex_adapter *adapter); +int mwifiex_free_cmd_buffer(struct mwifiex_adapter *adapter); +void mwifiex_cancel_all_pending_cmd(struct mwifiex_adapter *adapter); +void mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *ioctl_wq); + +void mwifiex_insert_cmd_to_free_q(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_node); + +void mwifiex_insert_cmd_to_pending_q(struct mwifiex_adapter *adapter, + struct cmd_ctrl_node *cmd_node, + u32 addtail); + +int mwifiex_exec_next_cmd(struct mwifiex_adapter *adapter); +int mwifiex_process_cmdresp(struct mwifiex_adapter *adapter); +int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb); +int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb, + struct mwifiex_tx_param *tx_param); +int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags); +int mwifiex_write_data_complete(struct mwifiex_adapter *adapter, + struct sk_buff *skb, int status); +int mwifiex_recv_packet_complete(struct mwifiex_adapter *, + struct sk_buff *skb, int status); +void mwifiex_clean_txrx(struct mwifiex_private *priv); +u8 mwifiex_check_last_packet_indication(struct mwifiex_private *priv); +void mwifiex_check_ps_cond(struct mwifiex_adapter *adapter); +void mwifiex_process_sleep_confirm_resp(struct mwifiex_adapter *, u8 *, + u32); +int mwifiex_cmd_enh_power_mode(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, uint16_t ps_bitmap, + void *data_buf); +int mwifiex_ret_enh_power_mode(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf); +void mwifiex_process_hs_config(struct mwifiex_adapter *adapter); +void mwifiex_hs_activated_event(struct mwifiex_private *priv, + u8 activated); +int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp); +int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb); +int mwifiex_sta_prepare_cmd(struct mwifiex_private *, uint16_t cmd_no, + u16 cmd_action, u32 cmd_oid, + void *data_buf, void *cmd_buf); +int mwifiex_process_sta_cmdresp(struct mwifiex_private *, u16 cmdresp_no, + void *cmd_buf, void *ioctl); +int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *, + struct sk_buff *skb); +int mwifiex_process_sta_event(struct mwifiex_private *); +void *mwifiex_process_sta_txpd(struct mwifiex_private *, struct sk_buff *skb); +int mwifiex_sta_init_cmd(struct mwifiex_private *, u8 first_sta); +int mwifiex_scan_networks(struct mwifiex_private *priv, void *wait_queue, + u16 action, + const struct mwifiex_user_scan_cfg + *user_scan_in, struct mwifiex_scan_resp *); +int mwifiex_cmd_802_11_scan(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf); +void mwifiex_queue_scan_cmd(struct mwifiex_private *priv, + struct cmd_ctrl_node *cmd_node); +int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *wait_queue); +s32 mwifiex_find_ssid_in_list(struct mwifiex_private *priv, + struct mwifiex_802_11_ssid *ssid, u8 *bssid, + u32 mode); +s32 mwifiex_find_bssid_in_list(struct mwifiex_private *priv, u8 *bssid, + u32 mode); +int mwifiex_find_best_network(struct mwifiex_private *priv, + struct mwifiex_ssid_bssid *req_ssid_bssid); +s32 mwifiex_ssid_cmp(struct mwifiex_802_11_ssid *ssid1, + struct mwifiex_802_11_ssid *ssid2); +int mwifiex_associate(struct mwifiex_private *priv, void *wait_queue, + struct mwifiex_bssdescriptor *bss_desc); +int mwifiex_cmd_802_11_associate(struct mwifiex_private *priv, + struct host_cmd_ds_command + *cmd, void *data_buf); +int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *wait_queue); +void mwifiex_reset_connect_state(struct mwifiex_private *priv); +void mwifiex_2040_coex_event(struct mwifiex_private *priv); +u8 mwifiex_band_to_radio_type(u8 band); +int mwifiex_deauthenticate(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait_queue, + u8 *mac); +int mwifiex_adhoc_start(struct mwifiex_private *priv, void *wait_queue, + struct mwifiex_802_11_ssid *adhoc_ssid); +int mwifiex_adhoc_join(struct mwifiex_private *priv, void *wait_queue, + struct mwifiex_bssdescriptor *bss_desc); +int mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf); +int mwifiex_cmd_802_11_ad_hoc_join(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf); +int mwifiex_ret_802_11_ad_hoc(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *wait_queue); +int mwifiex_cmd_802_11_bg_scan_query(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf); +struct mwifiex_chan_freq_power * + mwifiex_get_cfp_by_band_and_channel_from_cfg80211( + struct mwifiex_private *priv, + u8 band, u16 channel); +struct mwifiex_chan_freq_power *mwifiex_get_cfp_by_band_and_freq_from_cfg80211( + struct mwifiex_private *priv, + u8 band, u32 freq); +u32 mwifiex_index_to_data_rate(struct mwifiex_adapter *adapter, u8 index, + u8 ht_info); +u32 mwifiex_find_freq_from_band_chan(u8, u8); +int mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv, u16 vsie_mask, + u8 **buffer); +u32 mwifiex_index_to_data_rate(struct mwifiex_adapter *adapter, u8 index, + u8 ht_info); +u32 mwifiex_get_active_data_rates(struct mwifiex_private *priv, + u8 *rates); +u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates); +u8 mwifiex_data_rate_to_index(struct mwifiex_adapter *adapter, u32 rate); +u8 mwifiex_is_rate_auto(struct mwifiex_private *priv); +int mwifiex_get_rate_index(struct mwifiex_adapter *adapter, + u16 *rateBitmap, int size); +extern u16 region_code_index[MWIFIEX_MAX_REGION_CODE]; +void mwifiex_save_curr_bcn(struct mwifiex_private *priv); +void mwifiex_free_curr_bcn(struct mwifiex_private *priv); +int mwifiex_cmd_get_hw_spec(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd); +int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp); +int is_command_pending(struct mwifiex_adapter *adapter); + +/* + * This function checks if the queuing is RA based or not. + */ +static inline u8 +mwifiex_queuing_ra_based(struct mwifiex_private *priv) +{ + /* + * Currently we assume if we are in Infra, then DA=RA. This might not be + * true in the future + */ + if ((priv->bss_mode == NL80211_IFTYPE_STATION) && + (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA)) + return false; + + return true; +} + +/* + * This function copies rates. + */ +static inline u32 +mwifiex_copy_rates(u8 *dest, u32 pos, u8 *src, int len) +{ + int i; + + for (i = 0; i < len && src[i]; i++, pos++) { + if (pos >= MWIFIEX_SUPPORTED_RATES) + break; + dest[pos] = src[i]; + } + + return pos; +} + +/* + * This function returns the correct private structure pointer based + * upon the BSS type and BSS number. + */ +static inline struct mwifiex_private * +mwifiex_get_priv_by_id(struct mwifiex_adapter *adapter, + u32 bss_num, u32 bss_type) +{ + int i; + + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + if ((adapter->priv[i]->bss_num == bss_num) + && (adapter->priv[i]->bss_type == bss_type)) + break; + } + } + return ((i < adapter->priv_num) ? adapter->priv[i] : NULL); +} + +/* + * This function returns the first available private structure pointer + * based upon the BSS role. + */ +static inline struct mwifiex_private * +mwifiex_get_priv(struct mwifiex_adapter *adapter, + enum mwifiex_bss_role bss_role) +{ + int i; + + for (i = 0; i < adapter->priv_num; i++) { + if (adapter->priv[i]) { + if (bss_role == MWIFIEX_BSS_ROLE_ANY || + GET_BSS_ROLE(adapter->priv[i]) == bss_role) + break; + } + } + + return ((i < adapter->priv_num) ? adapter->priv[i] : NULL); +} + +/* + * This function returns the driver private structure of a network device. + */ +static inline struct mwifiex_private * +mwifiex_netdev_get_priv(struct net_device *dev) +{ + return (struct mwifiex_private *) (*(unsigned long *) netdev_priv(dev)); +} + +struct mwifiex_wait_queue *mwifiex_alloc_fill_wait_queue( + struct mwifiex_private *, + u8 wait_option); +struct mwifiex_private *mwifiex_bss_index_to_priv(struct mwifiex_adapter + *adapter, u8 bss_index); +int mwifiex_shutdown_fw(struct mwifiex_private *, u8); + +int mwifiex_add_card(void *, struct semaphore *, struct mwifiex_if_ops *); +int mwifiex_remove_card(struct mwifiex_adapter *, struct semaphore *); + +void mwifiex_get_version(struct mwifiex_adapter *adapter, char *version, + int maxlen); +int mwifiex_request_set_mac_address(struct mwifiex_private *priv); +void mwifiex_request_set_multicast_list(struct mwifiex_private *priv, + struct net_device *dev); +int mwifiex_request_ioctl(struct mwifiex_private *priv, + struct mwifiex_wait_queue *req, + int, u8 wait_option); +int mwifiex_disconnect(struct mwifiex_private *, u8, u8 *); +int mwifiex_bss_start(struct mwifiex_private *priv, + u8 wait_option, + struct mwifiex_ssid_bssid *ssid_bssid); +int mwifiex_set_hs_params(struct mwifiex_private *priv, + u16 action, u8 wait_option, + struct mwifiex_ds_hs_cfg *hscfg); +int mwifiex_cancel_hs(struct mwifiex_private *priv, u8 wait_option); +int mwifiex_enable_hs(struct mwifiex_adapter *adapter); +void mwifiex_process_ioctl_resp(struct mwifiex_private *priv, + struct mwifiex_wait_queue *req); +u32 mwifiex_get_mode(struct mwifiex_private *priv, u8 wait_option); +int mwifiex_get_signal_info(struct mwifiex_private *priv, + u8 wait_option, + struct mwifiex_ds_get_signal *signal); +int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, + struct mwifiex_rate_cfg *rate); +int mwifiex_get_channel_list(struct mwifiex_private *priv, + u8 wait_option, + struct mwifiex_chan_list *chanlist); +int mwifiex_get_scan_table(struct mwifiex_private *priv, + u8 wait_option, + struct mwifiex_scan_resp *scanresp); +int mwifiex_enable_wep_key(struct mwifiex_private *priv, u8 wait_option); +int mwifiex_find_best_bss(struct mwifiex_private *priv, u8 wait_option, + struct mwifiex_ssid_bssid *ssid_bssid); +int mwifiex_request_scan(struct mwifiex_private *priv, + u8 wait_option, + struct mwifiex_802_11_ssid *req_ssid); +int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv, + struct mwifiex_user_scan_cfg *scan_req); +int mwifiex_change_adhoc_chan(struct mwifiex_private *priv, int channel); +int mwifiex_set_radio(struct mwifiex_private *priv, u8 option); + +int mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel); + +int mwifiex_set_encode(struct mwifiex_private *priv, const u8 *key, + int key_len, u8 key_index, int disable); + +int mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len); + +int mwifiex_get_ver_ext(struct mwifiex_private *priv); + +int mwifiex_get_stats_info(struct mwifiex_private *priv, + struct mwifiex_ds_get_stats *log); + +int mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type, + u32 reg_offset, u32 reg_value); + +int mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type, + u32 reg_offset, u32 *value); + +int mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes, + u8 *value); + +int mwifiex_set_11n_httx_cfg(struct mwifiex_private *priv, int data); + +int mwifiex_get_11n_httx_cfg(struct mwifiex_private *priv, int *data); + +int mwifiex_set_tx_rate_cfg(struct mwifiex_private *priv, int tx_rate_index); + +int mwifiex_get_tx_rate_cfg(struct mwifiex_private *priv, int *tx_rate_index); + +int mwifiex_drv_set_power(struct mwifiex_private *priv, bool power_on); + +int mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, + char *version, int max_len); + +int mwifiex_set_tx_power(struct mwifiex_private *priv, int type, int dbm); + +int mwifiex_main_process(struct mwifiex_adapter *); + +int mwifiex_bss_ioctl_channel(struct mwifiex_private *, + u16 action, + struct mwifiex_chan_freq_power *cfp); +int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *, + struct mwifiex_wait_queue *, + struct mwifiex_ssid_bssid *); +int mwifiex_radio_ioctl_band_cfg(struct mwifiex_private *, + u16 action, + struct mwifiex_ds_band_cfg *); +int mwifiex_snmp_mib_ioctl(struct mwifiex_private *, + struct mwifiex_wait_queue *, + u32 cmd_oid, u16 action, u32 *value); +int mwifiex_get_bss_info(struct mwifiex_private *, + struct mwifiex_bss_info *); + +#ifdef CONFIG_DEBUG_FS +void mwifiex_debugfs_init(void); +void mwifiex_debugfs_remove(void); + +void mwifiex_dev_debugfs_init(struct mwifiex_private *priv); +void mwifiex_dev_debugfs_remove(struct mwifiex_private *priv); +#endif +#endif /* !_MWIFIEX_MAIN_H_ */ diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c new file mode 100644 index 000000000000..6bb52d0e6cfa --- /dev/null +++ b/drivers/net/wireless/mwifiex/scan.c @@ -0,0 +1,3097 @@ +/* + * Marvell Wireless LAN device driver: scan ioctl and command handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "11n.h" +#include "cfg80211.h" + +/* The maximum number of channels the firmware can scan per command */ +#define MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN 14 + +#define MWIFIEX_CHANNELS_PER_SCAN_CMD 4 + +/* Memory needed to store a max sized Channel List TLV for a firmware scan */ +#define CHAN_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_header) \ + + (MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN \ + *sizeof(struct mwifiex_chan_scan_param_set))) + +/* Memory needed to store supported rate */ +#define RATE_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_rates_param_set) \ + + HOSTCMD_SUPPORTED_RATES) + +/* Memory needed to store a max number/size WildCard SSID TLV for a firmware + scan */ +#define WILDCARD_SSID_TLV_MAX_SIZE \ + (MWIFIEX_MAX_SSID_LIST_LENGTH * \ + (sizeof(struct mwifiex_ie_types_wildcard_ssid_params) \ + + IEEE80211_MAX_SSID_LEN)) + +/* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */ +#define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config) \ + + sizeof(struct mwifiex_ie_types_num_probes) \ + + sizeof(struct mwifiex_ie_types_htcap) \ + + CHAN_TLV_MAX_SIZE \ + + RATE_TLV_MAX_SIZE \ + + WILDCARD_SSID_TLV_MAX_SIZE) + + +union mwifiex_scan_cmd_config_tlv { + /* Scan configuration (variable length) */ + struct mwifiex_scan_cmd_config config; + /* Max allocated block */ + u8 config_alloc_buf[MAX_SCAN_CFG_ALLOC]; +}; + +enum cipher_suite { + CIPHER_SUITE_TKIP, + CIPHER_SUITE_CCMP, + CIPHER_SUITE_MAX +}; +static u8 mwifiex_wpa_oui[CIPHER_SUITE_MAX][4] = { + { 0x00, 0x50, 0xf2, 0x02 }, /* TKIP */ + { 0x00, 0x50, 0xf2, 0x04 }, /* AES */ +}; +static u8 mwifiex_rsn_oui[CIPHER_SUITE_MAX][4] = { + { 0x00, 0x0f, 0xac, 0x02 }, /* TKIP */ + { 0x00, 0x0f, 0xac, 0x04 }, /* AES */ +}; + +/* + * This function parses a given IE for a given OUI. + * + * This is used to parse a WPA/RSN IE to find if it has + * a given oui in PTK. + */ +static u8 +mwifiex_search_oui_in_ie(struct ie_body *iebody, u8 *oui) +{ + u8 count; + + count = iebody->ptk_cnt[0]; + + /* There could be multiple OUIs for PTK hence + 1) Take the length. + 2) Check all the OUIs for AES. + 3) If one of them is AES then pass success. */ + while (count) { + if (!memcmp(iebody->ptk_body, oui, sizeof(iebody->ptk_body))) + return MWIFIEX_OUI_PRESENT; + + --count; + if (count) + iebody = (struct ie_body *) ((u8 *) iebody + + sizeof(iebody->ptk_body)); + } + + pr_debug("info: %s: OUI is not found in PTK\n", __func__); + return MWIFIEX_OUI_NOT_PRESENT; +} + +/* + * This function checks if a given OUI is present in a RSN IE. + * + * The function first checks if a RSN IE is present or not in the + * BSS descriptor. It tries to locate the OUI only if such an IE is + * present. + */ +static u8 +mwifiex_is_rsn_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher) +{ + u8 *oui = NULL; + struct ie_body *iebody = NULL; + u8 ret = MWIFIEX_OUI_NOT_PRESENT; + + if (((bss_desc->bcn_rsn_ie) && ((*(bss_desc->bcn_rsn_ie)). + ieee_hdr.element_id == WLAN_EID_RSN))) { + iebody = (struct ie_body *) + (((u8 *) bss_desc->bcn_rsn_ie->data) + + RSN_GTK_OUI_OFFSET); + oui = &mwifiex_rsn_oui[cipher][0]; + ret = mwifiex_search_oui_in_ie(iebody, oui); + if (ret) + return ret; + } + return ret; +} + +/* + * This function checks if a given OUI is present in a WPA IE. + * + * The function first checks if a WPA IE is present or not in the + * BSS descriptor. It tries to locate the OUI only if such an IE is + * present. + */ +static u8 +mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher) +{ + u8 *oui = NULL; + struct ie_body *iebody = NULL; + u8 ret = MWIFIEX_OUI_NOT_PRESENT; + + if (((bss_desc->bcn_wpa_ie) && ((*(bss_desc->bcn_wpa_ie)). + vend_hdr.element_id == WLAN_EID_WPA))) { + iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data; + oui = &mwifiex_wpa_oui[cipher][0]; + ret = mwifiex_search_oui_in_ie(iebody, oui); + if (ret) + return ret; + } + return ret; +} + +/* + * This function compares two SSIDs and checks if they match. + */ +s32 +mwifiex_ssid_cmp(struct mwifiex_802_11_ssid *ssid1, + struct mwifiex_802_11_ssid *ssid2) +{ + if (!ssid1 || !ssid2 || (ssid1->ssid_len != ssid2->ssid_len)) + return -1; + return memcmp(ssid1->ssid, ssid2->ssid, ssid1->ssid_len); +} + +/* + * Sends IOCTL request to get the best BSS. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_find_best_bss(struct mwifiex_private *priv, + u8 wait_option, struct mwifiex_ssid_bssid *ssid_bssid) +{ + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ssid_bssid tmp_ssid_bssid; + int ret = 0; + u8 *mac = NULL; + + if (!ssid_bssid) + return -1; + + /* Allocate wait request buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + memcpy(&tmp_ssid_bssid, ssid_bssid, + sizeof(struct mwifiex_ssid_bssid)); + ret = mwifiex_bss_ioctl_find_bss(priv, wait, &tmp_ssid_bssid); + + if (!ret) { + memcpy(ssid_bssid, &tmp_ssid_bssid, + sizeof(struct mwifiex_ssid_bssid)); + mac = (u8 *) &ssid_bssid->bssid; + dev_dbg(priv->adapter->dev, "cmd: found network: ssid=%s," + " %pM\n", ssid_bssid->ssid.ssid, mac); + } + + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to start a scan with user configurations. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + * + * Upon completion, it also generates a wireless event to notify + * applications. + */ +int mwifiex_set_user_scan_ioctl(struct mwifiex_private *priv, + struct mwifiex_user_scan_cfg *scan_req) +{ + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + + /* Allocate an IOCTL request buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_scan_networks(priv, wait, HostCmd_ACT_GEN_SET, + scan_req, NULL); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + + if (wait && (status != -EINPROGRESS)) + kfree(wait); + return status; +} + +/* + * This function checks if wapi is enabled in driver and scanned network is + * compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_wapi(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + if (priv->sec_info.wapi_enabled && + (bss_desc->bcn_wapi_ie && + ((*(bss_desc->bcn_wapi_ie)).ieee_hdr.element_id == + WLAN_EID_BSS_AC_ACCESS_DELAY))) { + return true; + } + return false; +} + +/* + * This function checks if driver is configured with no security mode and + * scanned network is compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_no_sec(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED + && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled + && ((!bss_desc->bcn_wpa_ie) || + ((*(bss_desc->bcn_wpa_ie)).vend_hdr.element_id != + WLAN_EID_WPA)) + && ((!bss_desc->bcn_rsn_ie) || + ((*(bss_desc->bcn_rsn_ie)).ieee_hdr.element_id != + WLAN_EID_RSN)) + && !priv->sec_info.encryption_mode + && !bss_desc->privacy) { + return true; + } + return false; +} + +/* + * This function checks if static WEP is enabled in driver and scanned network + * is compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_static_wep(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED + && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled + && bss_desc->privacy) { + return true; + } + return false; +} + +/* + * This function checks if wpa is enabled in driver and scanned network is + * compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_wpa(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + int index) +{ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED + && priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled + && ((bss_desc->bcn_wpa_ie) && ((*(bss_desc->bcn_wpa_ie)).vend_hdr. + element_id == WLAN_EID_WPA)) + /* + * Privacy bit may NOT be set in some APs like + * LinkSys WRT54G && bss_desc->privacy + */ + ) { + dev_dbg(priv->adapter->dev, "info: %s: WPA: index=%d" + " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s " + "EncMode=%#x privacy=%#x\n", __func__, index, + (bss_desc->bcn_wpa_ie) ? + (*(bss_desc->bcn_wpa_ie)). + vend_hdr.element_id : 0, + (bss_desc->bcn_rsn_ie) ? + (*(bss_desc->bcn_rsn_ie)). + ieee_hdr.element_id : 0, + (priv->sec_info.wep_status == + MWIFIEX_802_11_WEP_ENABLED) ? "e" : "d", + (priv->sec_info.wpa_enabled) ? "e" : "d", + (priv->sec_info.wpa2_enabled) ? "e" : "d", + priv->sec_info.encryption_mode, + bss_desc->privacy); + return true; + } + return false; +} + +/* + * This function checks if wpa2 is enabled in driver and scanned network is + * compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_wpa2(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + int index) +{ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED + && !priv->sec_info.wpa_enabled && priv->sec_info.wpa2_enabled + && ((bss_desc->bcn_rsn_ie) && ((*(bss_desc->bcn_rsn_ie)).ieee_hdr. + element_id == WLAN_EID_RSN)) + /* + * Privacy bit may NOT be set in some APs like + * LinkSys WRT54G && bss_desc->privacy + */ + ) { + dev_dbg(priv->adapter->dev, "info: %s: WPA2: index=%d" + " wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s " + "EncMode=%#x privacy=%#x\n", __func__, index, + (bss_desc->bcn_wpa_ie) ? + (*(bss_desc->bcn_wpa_ie)). + vend_hdr.element_id : 0, + (bss_desc->bcn_rsn_ie) ? + (*(bss_desc->bcn_rsn_ie)). + ieee_hdr.element_id : 0, + (priv->sec_info.wep_status == + MWIFIEX_802_11_WEP_ENABLED) ? "e" : "d", + (priv->sec_info.wpa_enabled) ? "e" : "d", + (priv->sec_info.wpa2_enabled) ? "e" : "d", + priv->sec_info.encryption_mode, + bss_desc->privacy); + return true; + } + return false; +} + +/* + * This function checks if adhoc AES is enabled in driver and scanned network is + * compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_adhoc_aes(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc) +{ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED + && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled + && ((!bss_desc->bcn_wpa_ie) || ((*(bss_desc->bcn_wpa_ie)).vend_hdr. + element_id != WLAN_EID_WPA)) + && ((!bss_desc->bcn_rsn_ie) || ((*(bss_desc->bcn_rsn_ie)).ieee_hdr. + element_id != WLAN_EID_RSN)) + && !priv->sec_info.encryption_mode + && bss_desc->privacy) { + return true; + } + return false; +} + +/* + * This function checks if dynamic WEP is enabled in driver and scanned network + * is compatible with it. + */ +static bool +mwifiex_is_network_compatible_for_dynamic_wep(struct mwifiex_private *priv, + struct mwifiex_bssdescriptor *bss_desc, + int index) +{ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_DISABLED + && !priv->sec_info.wpa_enabled && !priv->sec_info.wpa2_enabled + && ((!bss_desc->bcn_wpa_ie) || ((*(bss_desc->bcn_wpa_ie)).vend_hdr. + element_id != WLAN_EID_WPA)) + && ((!bss_desc->bcn_rsn_ie) || ((*(bss_desc->bcn_rsn_ie)).ieee_hdr. + element_id != WLAN_EID_RSN)) + && priv->sec_info.encryption_mode + && bss_desc->privacy) { + dev_dbg(priv->adapter->dev, "info: %s: dynamic " + "WEP: index=%d wpa_ie=%#x wpa2_ie=%#x " + "EncMode=%#x privacy=%#x\n", + __func__, index, + (bss_desc->bcn_wpa_ie) ? + (*(bss_desc->bcn_wpa_ie)). + vend_hdr.element_id : 0, + (bss_desc->bcn_rsn_ie) ? + (*(bss_desc->bcn_rsn_ie)). + ieee_hdr.element_id : 0, + priv->sec_info.encryption_mode, + bss_desc->privacy); + return true; + } + return false; +} + +/* + * This function checks if a scanned network is compatible with the driver + * settings. + * + * WEP WPA WPA2 ad-hoc encrypt Network + * enabled enabled enabled AES mode Privacy WPA WPA2 Compatible + * 0 0 0 0 NONE 0 0 0 yes No security + * 0 1 0 0 x 1x 1 x yes WPA (disable + * HT if no AES) + * 0 0 1 0 x 1x x 1 yes WPA2 (disable + * HT if no AES) + * 0 0 0 1 NONE 1 0 0 yes Ad-hoc AES + * 1 0 0 0 NONE 1 0 0 yes Static WEP + * (disable HT) + * 0 0 0 0 !=NONE 1 0 0 yes Dynamic WEP + * + * Compatibility is not matched while roaming, except for mode. + */ +static s32 +mwifiex_is_network_compatible(struct mwifiex_private *priv, u32 index, u32 mode) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_bssdescriptor *bss_desc; + + bss_desc = &adapter->scan_table[index]; + bss_desc->disable_11n = false; + + /* Don't check for compatibility if roaming */ + if (priv->media_connected && (priv->bss_mode == NL80211_IFTYPE_STATION) + && (bss_desc->bss_mode == NL80211_IFTYPE_STATION)) + return index; + + if (priv->wps.session_enable) { + dev_dbg(adapter->dev, + "info: return success directly in WPS period\n"); + return index; + } + + if (mwifiex_is_network_compatible_for_wapi(priv, bss_desc)) { + dev_dbg(adapter->dev, "info: return success for WAPI AP\n"); + return index; + } + + if (bss_desc->bss_mode == mode) { + if (mwifiex_is_network_compatible_for_no_sec(priv, bss_desc)) { + /* No security */ + return index; + } else if (mwifiex_is_network_compatible_for_static_wep(priv, + bss_desc)) { + /* Static WEP enabled */ + dev_dbg(adapter->dev, "info: Disable 11n in WEP mode.\n"); + bss_desc->disable_11n = true; + return index; + } else if (mwifiex_is_network_compatible_for_wpa(priv, bss_desc, + index)) { + /* WPA enabled */ + if (((priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN) + && bss_desc->bcn_ht_cap) + && !mwifiex_is_wpa_oui_present(bss_desc, + CIPHER_SUITE_CCMP)) { + + if (mwifiex_is_wpa_oui_present(bss_desc, + CIPHER_SUITE_TKIP)) { + dev_dbg(adapter->dev, + "info: Disable 11n if AES " + "is not supported by AP\n"); + bss_desc->disable_11n = true; + } else { + return -1; + } + } + return index; + } else if (mwifiex_is_network_compatible_for_wpa2(priv, + bss_desc, index)) { + /* WPA2 enabled */ + if (((priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN) + && bss_desc->bcn_ht_cap) + && !mwifiex_is_rsn_oui_present(bss_desc, + CIPHER_SUITE_CCMP)) { + + if (mwifiex_is_rsn_oui_present(bss_desc, + CIPHER_SUITE_TKIP)) { + dev_dbg(adapter->dev, + "info: Disable 11n if AES " + "is not supported by AP\n"); + bss_desc->disable_11n = true; + } else { + return -1; + } + } + return index; + } else if (mwifiex_is_network_compatible_for_adhoc_aes(priv, + bss_desc)) { + /* Ad-hoc AES enabled */ + return index; + } else if (mwifiex_is_network_compatible_for_dynamic_wep(priv, + bss_desc, index)) { + /* Dynamic WEP enabled */ + return index; + } + + /* Security doesn't match */ + dev_dbg(adapter->dev, "info: %s: failed: index=%d " + "wpa_ie=%#x wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s EncMode" + "=%#x privacy=%#x\n", + __func__, index, + (bss_desc->bcn_wpa_ie) ? + (*(bss_desc->bcn_wpa_ie)).vend_hdr. + element_id : 0, + (bss_desc->bcn_rsn_ie) ? + (*(bss_desc->bcn_rsn_ie)).ieee_hdr. + element_id : 0, + (priv->sec_info.wep_status == + MWIFIEX_802_11_WEP_ENABLED) ? "e" : "d", + (priv->sec_info.wpa_enabled) ? "e" : "d", + (priv->sec_info.wpa2_enabled) ? "e" : "d", + priv->sec_info.encryption_mode, bss_desc->privacy); + return -1; + } + + /* Mode doesn't match */ + return -1; +} + +/* + * This function finds the best SSID in the scan list. + * + * It searches the scan table for the best SSID that also matches the current + * adapter network preference (mode, security etc.). + */ +static s32 +mwifiex_find_best_network_in_list(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u32 mode = priv->bss_mode; + s32 best_net = -1; + s32 best_rssi = 0; + u32 i; + + dev_dbg(adapter->dev, "info: num of BSSIDs = %d\n", + adapter->num_in_scan_table); + + for (i = 0; i < adapter->num_in_scan_table; i++) { + switch (mode) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + if (mwifiex_is_network_compatible(priv, i, mode) >= 0) { + if (SCAN_RSSI(adapter->scan_table[i].rssi) > + best_rssi) { + best_rssi = SCAN_RSSI(adapter-> + scan_table[i].rssi); + best_net = i; + } + } + break; + case NL80211_IFTYPE_UNSPECIFIED: + default: + if (SCAN_RSSI(adapter->scan_table[i].rssi) > + best_rssi) { + best_rssi = SCAN_RSSI(adapter->scan_table[i]. + rssi); + best_net = i; + } + break; + } + } + + return best_net; +} + +/* + * This function creates a channel list for the driver to scan, based + * on region/band information. + * + * This routine is used for any scan that is not provided with a + * specific channel list to scan. + */ +static void +mwifiex_scan_create_channel_list(struct mwifiex_private *priv, + const struct mwifiex_user_scan_cfg + *user_scan_in, + struct mwifiex_chan_scan_param_set + *scan_chan_list, + u8 filtered_scan) +{ + enum ieee80211_band band; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *ch; + struct mwifiex_adapter *adapter = priv->adapter; + int chan_idx = 0, i; + u8 scan_type; + + for (band = 0; (band < IEEE80211_NUM_BANDS) ; band++) { + + if (!priv->wdev->wiphy->bands[band]) + continue; + + sband = priv->wdev->wiphy->bands[band]; + + for (i = 0; (i < sband->n_channels) ; i++, chan_idx++) { + ch = &sband->channels[i]; + if (ch->flags & IEEE80211_CHAN_DISABLED) + continue; + scan_chan_list[chan_idx].radio_type = band; + scan_type = ch->flags & IEEE80211_CHAN_PASSIVE_SCAN; + if (user_scan_in && + user_scan_in->chan_list[0].scan_time) + scan_chan_list[chan_idx].max_scan_time = + cpu_to_le16((u16) user_scan_in-> + chan_list[0].scan_time); + else if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE) + scan_chan_list[chan_idx].max_scan_time = + cpu_to_le16(adapter->passive_scan_time); + else + scan_chan_list[chan_idx].max_scan_time = + cpu_to_le16(adapter->active_scan_time); + if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE) + scan_chan_list[chan_idx].chan_scan_mode_bitmap + |= MWIFIEX_PASSIVE_SCAN; + else + scan_chan_list[chan_idx].chan_scan_mode_bitmap + &= ~MWIFIEX_PASSIVE_SCAN; + scan_chan_list[chan_idx].chan_number = + (u32) ch->hw_value; + if (filtered_scan) { + scan_chan_list[chan_idx].max_scan_time = + cpu_to_le16(adapter->specific_scan_time); + scan_chan_list[chan_idx].chan_scan_mode_bitmap + |= MWIFIEX_DISABLE_CHAN_FILT; + } + } + + } +} + +/* + * This function constructs and sends multiple scan config commands to + * the firmware. + * + * Previous routines in the code flow have created a scan command configuration + * with any requested TLVs. This function splits the channel TLV into maximum + * channels supported per scan lists and sends the portion of the channel TLV, + * along with the other TLVs, to the firmware. + */ +static int +mwifiex_scan_channel_list(struct mwifiex_private *priv, void *wait_buf, + u32 max_chan_per_scan, u8 filtered_scan, + struct mwifiex_scan_cmd_config *scan_cfg_out, + struct mwifiex_ie_types_chan_list_param_set + *chan_tlv_out, + struct mwifiex_chan_scan_param_set *scan_chan_list) +{ + int ret = 0; + struct mwifiex_chan_scan_param_set *tmp_chan_list; + struct mwifiex_chan_scan_param_set *start_chan; + + u32 tlv_idx; + u32 total_scan_time; + u32 done_early; + + if (!scan_cfg_out || !chan_tlv_out || !scan_chan_list) { + dev_dbg(priv->adapter->dev, + "info: Scan: Null detect: %p, %p, %p\n", + scan_cfg_out, chan_tlv_out, scan_chan_list); + return -1; + } + + chan_tlv_out->header.type = cpu_to_le16(TLV_TYPE_CHANLIST); + + /* Set the temp channel struct pointer to the start of the desired + list */ + tmp_chan_list = scan_chan_list; + + /* Loop through the desired channel list, sending a new firmware scan + commands for each max_chan_per_scan channels (or for 1,6,11 + individually if configured accordingly) */ + while (tmp_chan_list->chan_number) { + + tlv_idx = 0; + total_scan_time = 0; + chan_tlv_out->header.len = 0; + start_chan = tmp_chan_list; + done_early = false; + + /* + * Construct the Channel TLV for the scan command. Continue to + * insert channel TLVs until: + * - the tlv_idx hits the maximum configured per scan command + * - the next channel to insert is 0 (end of desired channel + * list) + * - done_early is set (controlling individual scanning of + * 1,6,11) + */ + while (tlv_idx < max_chan_per_scan + && tmp_chan_list->chan_number && !done_early) { + + dev_dbg(priv->adapter->dev, + "info: Scan: Chan(%3d), Radio(%d)," + " Mode(%d, %d), Dur(%d)\n", + tmp_chan_list->chan_number, + tmp_chan_list->radio_type, + tmp_chan_list->chan_scan_mode_bitmap + & MWIFIEX_PASSIVE_SCAN, + (tmp_chan_list->chan_scan_mode_bitmap + & MWIFIEX_DISABLE_CHAN_FILT) >> 1, + le16_to_cpu(tmp_chan_list->max_scan_time)); + + /* Copy the current channel TLV to the command being + prepared */ + memcpy(chan_tlv_out->chan_scan_param + tlv_idx, + tmp_chan_list, + sizeof(chan_tlv_out->chan_scan_param)); + + /* Increment the TLV header length by the size + appended */ + chan_tlv_out->header.len = + cpu_to_le16(le16_to_cpu(chan_tlv_out->header.len) + + (sizeof(chan_tlv_out->chan_scan_param))); + + /* + * The tlv buffer length is set to the number of bytes + * of the between the channel tlv pointer and the start + * of the tlv buffer. This compensates for any TLVs + * that were appended before the channel list. + */ + scan_cfg_out->tlv_buf_len = (u32) ((u8 *) chan_tlv_out - + scan_cfg_out->tlv_buf); + + /* Add the size of the channel tlv header and the data + length */ + scan_cfg_out->tlv_buf_len += + (sizeof(chan_tlv_out->header) + + le16_to_cpu(chan_tlv_out->header.len)); + + /* Increment the index to the channel tlv we are + constructing */ + tlv_idx++; + + /* Count the total scan time per command */ + total_scan_time += + le16_to_cpu(tmp_chan_list->max_scan_time); + + done_early = false; + + /* Stop the loop if the *current* channel is in the + 1,6,11 set and we are not filtering on a BSSID + or SSID. */ + if (!filtered_scan && (tmp_chan_list->chan_number == 1 + || tmp_chan_list->chan_number == 6 + || tmp_chan_list->chan_number == 11)) + done_early = true; + + /* Increment the tmp pointer to the next channel to + be scanned */ + tmp_chan_list++; + + /* Stop the loop if the *next* channel is in the 1,6,11 + set. This will cause it to be the only channel + scanned on the next interation */ + if (!filtered_scan && (tmp_chan_list->chan_number == 1 + || tmp_chan_list->chan_number == 6 + || tmp_chan_list->chan_number == 11)) + done_early = true; + } + + /* The total scan time should be less than scan command timeout + value */ + if (total_scan_time > MWIFIEX_MAX_TOTAL_SCAN_TIME) { + dev_err(priv->adapter->dev, "total scan time %dms" + " is over limit (%dms), scan skipped\n", + total_scan_time, MWIFIEX_MAX_TOTAL_SCAN_TIME); + ret = -1; + break; + } + + priv->adapter->scan_channels = start_chan; + + /* Send the scan command to the firmware with the specified + cfg */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_SCAN, + HostCmd_ACT_GEN_SET, + 0, wait_buf, scan_cfg_out); + if (ret) + break; + } + + if (ret) + return -1; + + return 0; +} + +/* + * This function constructs a scan command configuration structure to use + * in scan commands. + * + * Application layer or other functions can invoke network scanning + * with a scan configuration supplied in a user scan configuration structure. + * This structure is used as the basis of one or many scan command configuration + * commands that are sent to the command processing module and eventually to the + * firmware. + * + * This function creates a scan command configuration structure based on the + * following user supplied parameters (if present): + * - SSID filter + * - BSSID filter + * - Number of Probes to be sent + * - Channel list + * + * If the SSID or BSSID filter is not present, the filter is disabled/cleared. + * If the number of probes is not set, adapter default setting is used. + */ +static void +mwifiex_scan_setup_scan_config(struct mwifiex_private *priv, + const struct mwifiex_user_scan_cfg *user_scan_in, + struct mwifiex_scan_cmd_config *scan_cfg_out, + struct mwifiex_ie_types_chan_list_param_set + **chan_list_out, + struct mwifiex_chan_scan_param_set + *scan_chan_list, + u8 *max_chan_per_scan, u8 *filtered_scan, + u8 *scan_current_only) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_ie_types_num_probes *num_probes_tlv; + struct mwifiex_ie_types_wildcard_ssid_params *wildcard_ssid_tlv; + struct mwifiex_ie_types_rates_param_set *rates_tlv; + const u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 }; + u8 *tlv_pos; + u32 num_probes; + u32 ssid_len; + u32 chan_idx; + u32 scan_type; + u16 scan_dur; + u8 channel; + u8 radio_type; + u32 ssid_idx; + u8 ssid_filter; + u8 rates[MWIFIEX_SUPPORTED_RATES]; + u32 rates_size; + struct mwifiex_ie_types_htcap *ht_cap; + + /* The tlv_buf_len is calculated for each scan command. The TLVs added + in this routine will be preserved since the routine that sends the + command will append channelTLVs at *chan_list_out. The difference + between the *chan_list_out and the tlv_buf start will be used to + calculate the size of anything we add in this routine. */ + scan_cfg_out->tlv_buf_len = 0; + + /* Running tlv pointer. Assigned to chan_list_out at end of function + so later routines know where channels can be added to the command + buf */ + tlv_pos = scan_cfg_out->tlv_buf; + + /* Initialize the scan as un-filtered; the flag is later set to TRUE + below if a SSID or BSSID filter is sent in the command */ + *filtered_scan = false; + + /* Initialize the scan as not being only on the current channel. If + the channel list is customized, only contains one channel, and is + the active channel, this is set true and data flow is not halted. */ + *scan_current_only = false; + + if (user_scan_in) { + + /* Default the ssid_filter flag to TRUE, set false under + certain wildcard conditions and qualified by the existence + of an SSID list before marking the scan as filtered */ + ssid_filter = true; + + /* Set the BSS type scan filter, use Adapter setting if + unset */ + scan_cfg_out->bss_mode = + (user_scan_in->bss_mode ? (u8) user_scan_in-> + bss_mode : (u8) adapter->scan_mode); + + /* Set the number of probes to send, use Adapter setting + if unset */ + num_probes = + (user_scan_in->num_probes ? user_scan_in-> + num_probes : adapter->scan_probes); + + /* + * Set the BSSID filter to the incoming configuration, + * if non-zero. If not set, it will remain disabled + * (all zeros). + */ + memcpy(scan_cfg_out->specific_bssid, + user_scan_in->specific_bssid, + sizeof(scan_cfg_out->specific_bssid)); + + for (ssid_idx = 0; + ((ssid_idx < ARRAY_SIZE(user_scan_in->ssid_list)) + && (*user_scan_in->ssid_list[ssid_idx].ssid + || user_scan_in->ssid_list[ssid_idx].max_len)); + ssid_idx++) { + + ssid_len = strlen(user_scan_in->ssid_list[ssid_idx]. + ssid) + 1; + + wildcard_ssid_tlv = + (struct mwifiex_ie_types_wildcard_ssid_params *) + tlv_pos; + wildcard_ssid_tlv->header.type = + cpu_to_le16(TLV_TYPE_WILDCARDSSID); + wildcard_ssid_tlv->header.len = cpu_to_le16( + (u16) (ssid_len + sizeof(wildcard_ssid_tlv-> + max_ssid_length))); + wildcard_ssid_tlv->max_ssid_length = + user_scan_in->ssid_list[ssid_idx].max_len; + + memcpy(wildcard_ssid_tlv->ssid, + user_scan_in->ssid_list[ssid_idx].ssid, + ssid_len); + + tlv_pos += (sizeof(wildcard_ssid_tlv->header) + + le16_to_cpu(wildcard_ssid_tlv->header.len)); + + dev_dbg(adapter->dev, "info: scan: ssid_list[%d]: %s, %d\n", + ssid_idx, wildcard_ssid_tlv->ssid, + wildcard_ssid_tlv->max_ssid_length); + + /* Empty wildcard ssid with a maxlen will match many or + potentially all SSIDs (maxlen == 32), therefore do + not treat the scan as + filtered. */ + if (!ssid_len && wildcard_ssid_tlv->max_ssid_length) + ssid_filter = false; + + } + + /* + * The default number of channels sent in the command is low to + * ensure the response buffer from the firmware does not + * truncate scan results. That is not an issue with an SSID + * or BSSID filter applied to the scan results in the firmware. + */ + if ((ssid_idx && ssid_filter) + || memcmp(scan_cfg_out->specific_bssid, &zero_mac, + sizeof(zero_mac))) + *filtered_scan = true; + } else { + scan_cfg_out->bss_mode = (u8) adapter->scan_mode; + num_probes = adapter->scan_probes; + } + + /* + * If a specific BSSID or SSID is used, the number of channels in the + * scan command will be increased to the absolute maximum. + */ + if (*filtered_scan) + *max_chan_per_scan = MWIFIEX_MAX_CHANNELS_PER_SPECIFIC_SCAN; + else + *max_chan_per_scan = MWIFIEX_CHANNELS_PER_SCAN_CMD; + + /* If the input config or adapter has the number of Probes set, + add tlv */ + if (num_probes) { + + dev_dbg(adapter->dev, "info: scan: num_probes = %d\n", + num_probes); + + num_probes_tlv = (struct mwifiex_ie_types_num_probes *) tlv_pos; + num_probes_tlv->header.type = cpu_to_le16(TLV_TYPE_NUMPROBES); + num_probes_tlv->header.len = + cpu_to_le16(sizeof(num_probes_tlv->num_probes)); + num_probes_tlv->num_probes = cpu_to_le16((u16) num_probes); + + tlv_pos += sizeof(num_probes_tlv->header) + + le16_to_cpu(num_probes_tlv->header.len); + + } + + /* Append rates tlv */ + memset(rates, 0, sizeof(rates)); + + rates_size = mwifiex_get_supported_rates(priv, rates); + + rates_tlv = (struct mwifiex_ie_types_rates_param_set *) tlv_pos; + rates_tlv->header.type = cpu_to_le16(WLAN_EID_SUPP_RATES); + rates_tlv->header.len = cpu_to_le16((u16) rates_size); + memcpy(rates_tlv->rates, rates, rates_size); + tlv_pos += sizeof(rates_tlv->header) + rates_size; + + dev_dbg(adapter->dev, "info: SCAN_CMD: Rates size = %d\n", rates_size); + + if (ISSUPP_11NENABLED(priv->adapter->fw_cap_info) + && (priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN)) { + ht_cap = (struct mwifiex_ie_types_htcap *) tlv_pos; + memset(ht_cap, 0, sizeof(struct mwifiex_ie_types_htcap)); + ht_cap->header.type = cpu_to_le16(WLAN_EID_HT_CAPABILITY); + ht_cap->header.len = + cpu_to_le16(sizeof(struct ieee80211_ht_cap)); + mwifiex_fill_cap_info(priv, ht_cap); + tlv_pos += sizeof(struct mwifiex_ie_types_htcap); + } + + /* Append vendor specific IE TLV */ + mwifiex_cmd_append_vsie_tlv(priv, MWIFIEX_VSIE_MASK_SCAN, &tlv_pos); + + /* + * Set the output for the channel TLV to the address in the tlv buffer + * past any TLVs that were added in this function (SSID, num_probes). + * Channel TLVs will be added past this for each scan command, + * preserving the TLVs that were previously added. + */ + *chan_list_out = + (struct mwifiex_ie_types_chan_list_param_set *) tlv_pos; + + if (user_scan_in && user_scan_in->chan_list[0].chan_number) { + + dev_dbg(adapter->dev, "info: Scan: Using supplied channel list\n"); + + for (chan_idx = 0; + chan_idx < MWIFIEX_USER_SCAN_CHAN_MAX + && user_scan_in->chan_list[chan_idx].chan_number; + chan_idx++) { + + channel = user_scan_in->chan_list[chan_idx].chan_number; + (scan_chan_list + chan_idx)->chan_number = channel; + + radio_type = + user_scan_in->chan_list[chan_idx].radio_type; + (scan_chan_list + chan_idx)->radio_type = radio_type; + + scan_type = user_scan_in->chan_list[chan_idx].scan_type; + + if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE) + (scan_chan_list + + chan_idx)->chan_scan_mode_bitmap + |= MWIFIEX_PASSIVE_SCAN; + else + (scan_chan_list + + chan_idx)->chan_scan_mode_bitmap + &= ~MWIFIEX_PASSIVE_SCAN; + + if (user_scan_in->chan_list[chan_idx].scan_time) { + scan_dur = (u16) user_scan_in-> + chan_list[chan_idx].scan_time; + } else { + if (scan_type == MWIFIEX_SCAN_TYPE_PASSIVE) + scan_dur = adapter->passive_scan_time; + else if (*filtered_scan) + scan_dur = adapter->specific_scan_time; + else + scan_dur = adapter->active_scan_time; + } + + (scan_chan_list + chan_idx)->min_scan_time = + cpu_to_le16(scan_dur); + (scan_chan_list + chan_idx)->max_scan_time = + cpu_to_le16(scan_dur); + } + + /* Check if we are only scanning the current channel */ + if ((chan_idx == 1) + && (user_scan_in->chan_list[0].chan_number + == priv->curr_bss_params.bss_descriptor.channel)) { + *scan_current_only = true; + dev_dbg(adapter->dev, + "info: Scan: Scanning current channel only\n"); + } + + } else { + dev_dbg(adapter->dev, + "info: Scan: Creating full region channel list\n"); + mwifiex_scan_create_channel_list(priv, user_scan_in, + scan_chan_list, + *filtered_scan); + } +} + +/* + * This function inspects the scan response buffer for pointers to + * expected TLVs. + * + * TLVs can be included at the end of the scan response BSS information. + * + * Data in the buffer is parsed pointers to TLVs that can potentially + * be passed back in the response. + */ +static void +mwifiex_ret_802_11_scan_get_tlv_ptrs(struct mwifiex_adapter *adapter, + struct mwifiex_ie_types_data *tlv, + u32 tlv_buf_size, u32 req_tlv_type, + struct mwifiex_ie_types_data **tlv_data) +{ + struct mwifiex_ie_types_data *current_tlv; + u32 tlv_buf_left; + u32 tlv_type; + u32 tlv_len; + + current_tlv = tlv; + tlv_buf_left = tlv_buf_size; + *tlv_data = NULL; + + dev_dbg(adapter->dev, "info: SCAN_RESP: tlv_buf_size = %d\n", + tlv_buf_size); + + while (tlv_buf_left >= sizeof(struct mwifiex_ie_types_header)) { + + tlv_type = le16_to_cpu(current_tlv->header.type); + tlv_len = le16_to_cpu(current_tlv->header.len); + + if (sizeof(tlv->header) + tlv_len > tlv_buf_left) { + dev_err(adapter->dev, "SCAN_RESP: TLV buffer corrupt\n"); + break; + } + + if (req_tlv_type == tlv_type) { + switch (tlv_type) { + case TLV_TYPE_TSFTIMESTAMP: + dev_dbg(adapter->dev, "info: SCAN_RESP: TSF " + "timestamp TLV, len = %d\n", tlv_len); + *tlv_data = (struct mwifiex_ie_types_data *) + current_tlv; + break; + case TLV_TYPE_CHANNELBANDLIST: + dev_dbg(adapter->dev, "info: SCAN_RESP: channel" + " band list TLV, len = %d\n", tlv_len); + *tlv_data = (struct mwifiex_ie_types_data *) + current_tlv; + break; + default: + dev_err(adapter->dev, + "SCAN_RESP: unhandled TLV = %d\n", + tlv_type); + /* Give up, this seems corrupted */ + return; + } + } + + if (*tlv_data) + break; + + + tlv_buf_left -= (sizeof(tlv->header) + tlv_len); + current_tlv = + (struct mwifiex_ie_types_data *) (current_tlv->data + + tlv_len); + + } /* while */ +} + +/* + * This function interprets a BSS scan response returned from the firmware. + * + * The various fixed fields and IEs are parsed and passed back for a BSS + * probe response or beacon from scan command. Information is recorded as + * needed in the scan table for that entry. + * + * The following IE types are recognized and parsed - + * - SSID + * - Supported rates + * - FH parameters set + * - DS parameters set + * - CF parameters set + * - IBSS parameters set + * - ERP information + * - Extended supported rates + * - Vendor specific (221) + * - RSN IE + * - WAPI IE + * - HT capability + * - HT operation + * - BSS Coexistence 20/40 + * - Extended capability + * - Overlapping BSS scan parameters + */ +static int +mwifiex_interpret_bss_desc_with_ie(struct mwifiex_adapter *adapter, + struct mwifiex_bssdescriptor *bss_entry, + u8 **beacon_info, u32 *bytes_left) +{ + int ret = 0; + u8 element_id; + struct ieee_types_fh_param_set *fh_param_set; + struct ieee_types_ds_param_set *ds_param_set; + struct ieee_types_cf_param_set *cf_param_set; + struct ieee_types_ibss_param_set *ibss_param_set; + __le16 beacon_interval; + __le16 capabilities; + u8 *current_ptr; + u8 *rate; + u8 element_len; + u16 total_ie_len; + u8 bytes_to_copy; + u8 rate_size; + u16 beacon_size; + u8 found_data_rate_ie; + u32 bytes_left_for_current_beacon; + struct ieee_types_vendor_specific *vendor_ie; + const u8 wpa_oui[4] = { 0x00, 0x50, 0xf2, 0x01 }; + const u8 wmm_oui[4] = { 0x00, 0x50, 0xf2, 0x02 }; + + found_data_rate_ie = false; + rate_size = 0; + beacon_size = 0; + + if (*bytes_left >= sizeof(beacon_size)) { + /* Extract & convert beacon size from the command buffer */ + memcpy(&beacon_size, *beacon_info, sizeof(beacon_size)); + *bytes_left -= sizeof(beacon_size); + *beacon_info += sizeof(beacon_size); + } + + if (!beacon_size || beacon_size > *bytes_left) { + *beacon_info += *bytes_left; + *bytes_left = 0; + return -1; + } + + /* Initialize the current working beacon pointer for this BSS + iteration */ + current_ptr = *beacon_info; + + /* Advance the return beacon pointer past the current beacon */ + *beacon_info += beacon_size; + *bytes_left -= beacon_size; + + bytes_left_for_current_beacon = beacon_size; + + memcpy(bss_entry->mac_address, current_ptr, ETH_ALEN); + dev_dbg(adapter->dev, "info: InterpretIE: AP MAC Addr: %pM\n", + bss_entry->mac_address); + + current_ptr += ETH_ALEN; + bytes_left_for_current_beacon -= ETH_ALEN; + + if (bytes_left_for_current_beacon < 12) { + dev_err(adapter->dev, "InterpretIE: not enough bytes left\n"); + return -1; + } + + /* + * Next 4 fields are RSSI, time stamp, beacon interval, + * and capability information + */ + + /* RSSI is 1 byte long */ + bss_entry->rssi = (s32) (*current_ptr); + dev_dbg(adapter->dev, "info: InterpretIE: RSSI=%02X\n", *current_ptr); + current_ptr += 1; + bytes_left_for_current_beacon -= 1; + + /* + * The RSSI is not part of the beacon/probe response. After we have + * advanced current_ptr past the RSSI field, save the remaining + * data for use at the application layer + */ + bss_entry->beacon_buf = current_ptr; + bss_entry->beacon_buf_size = bytes_left_for_current_beacon; + + /* Time stamp is 8 bytes long */ + memcpy(bss_entry->time_stamp, current_ptr, 8); + current_ptr += 8; + bytes_left_for_current_beacon -= 8; + + /* Beacon interval is 2 bytes long */ + memcpy(&beacon_interval, current_ptr, 2); + bss_entry->beacon_period = le16_to_cpu(beacon_interval); + current_ptr += 2; + bytes_left_for_current_beacon -= 2; + + /* Capability information is 2 bytes long */ + memcpy(&capabilities, current_ptr, 2); + dev_dbg(adapter->dev, "info: InterpretIE: capabilities=0x%X\n", + capabilities); + bss_entry->cap_info_bitmap = le16_to_cpu(capabilities); + current_ptr += 2; + bytes_left_for_current_beacon -= 2; + + /* Rest of the current buffer are IE's */ + dev_dbg(adapter->dev, "info: InterpretIE: IELength for this AP = %d\n", + bytes_left_for_current_beacon); + + if (bss_entry->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) { + dev_dbg(adapter->dev, "info: InterpretIE: AP WEP enabled\n"); + bss_entry->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; + } else { + bss_entry->privacy = MWIFIEX_802_11_PRIV_FILTER_ACCEPT_ALL; + } + + if (bss_entry->cap_info_bitmap & WLAN_CAPABILITY_IBSS) + bss_entry->bss_mode = NL80211_IFTYPE_ADHOC; + else + bss_entry->bss_mode = NL80211_IFTYPE_STATION; + + + /* Process variable IE */ + while (bytes_left_for_current_beacon >= 2) { + element_id = *current_ptr; + element_len = *(current_ptr + 1); + total_ie_len = element_len + sizeof(struct ieee_types_header); + + if (bytes_left_for_current_beacon < total_ie_len) { + dev_err(adapter->dev, "err: InterpretIE: in processing" + " IE, bytes left < IE length\n"); + bytes_left_for_current_beacon = 0; + ret = -1; + continue; + } + switch (element_id) { + case WLAN_EID_SSID: + bss_entry->ssid.ssid_len = element_len; + memcpy(bss_entry->ssid.ssid, (current_ptr + 2), + element_len); + dev_dbg(adapter->dev, "info: InterpretIE: ssid: %-32s\n", + bss_entry->ssid.ssid); + break; + + case WLAN_EID_SUPP_RATES: + memcpy(bss_entry->data_rates, current_ptr + 2, + element_len); + memcpy(bss_entry->supported_rates, current_ptr + 2, + element_len); + rate_size = element_len; + found_data_rate_ie = true; + break; + + case WLAN_EID_FH_PARAMS: + fh_param_set = + (struct ieee_types_fh_param_set *) current_ptr; + memcpy(&bss_entry->phy_param_set.fh_param_set, + fh_param_set, + sizeof(struct ieee_types_fh_param_set)); + break; + + case WLAN_EID_DS_PARAMS: + ds_param_set = + (struct ieee_types_ds_param_set *) current_ptr; + + bss_entry->channel = ds_param_set->current_chan; + + memcpy(&bss_entry->phy_param_set.ds_param_set, + ds_param_set, + sizeof(struct ieee_types_ds_param_set)); + break; + + case WLAN_EID_CF_PARAMS: + cf_param_set = + (struct ieee_types_cf_param_set *) current_ptr; + memcpy(&bss_entry->ss_param_set.cf_param_set, + cf_param_set, + sizeof(struct ieee_types_cf_param_set)); + break; + + case WLAN_EID_IBSS_PARAMS: + ibss_param_set = + (struct ieee_types_ibss_param_set *) + current_ptr; + memcpy(&bss_entry->ss_param_set.ibss_param_set, + ibss_param_set, + sizeof(struct ieee_types_ibss_param_set)); + break; + + case WLAN_EID_ERP_INFO: + bss_entry->erp_flags = *(current_ptr + 2); + break; + + case WLAN_EID_EXT_SUPP_RATES: + /* + * Only process extended supported rate + * if data rate is already found. + * Data rate IE should come before + * extended supported rate IE + */ + if (found_data_rate_ie) { + if ((element_len + rate_size) > + MWIFIEX_SUPPORTED_RATES) + bytes_to_copy = + (MWIFIEX_SUPPORTED_RATES - + rate_size); + else + bytes_to_copy = element_len; + + rate = (u8 *) bss_entry->data_rates; + rate += rate_size; + memcpy(rate, current_ptr + 2, bytes_to_copy); + + rate = (u8 *) bss_entry->supported_rates; + rate += rate_size; + memcpy(rate, current_ptr + 2, bytes_to_copy); + } + break; + + case WLAN_EID_VENDOR_SPECIFIC: + vendor_ie = (struct ieee_types_vendor_specific *) + current_ptr; + + if (!memcmp + (vendor_ie->vend_hdr.oui, wpa_oui, + sizeof(wpa_oui))) { + bss_entry->bcn_wpa_ie = + (struct ieee_types_vendor_specific *) + current_ptr; + bss_entry->wpa_offset = (u16) (current_ptr - + bss_entry->beacon_buf); + } else if (!memcmp(vendor_ie->vend_hdr.oui, wmm_oui, + sizeof(wmm_oui))) { + if (total_ie_len == + sizeof(struct ieee_types_wmm_parameter) + || total_ie_len == + sizeof(struct ieee_types_wmm_info)) + /* + * Only accept and copy the WMM IE if + * it matches the size expected for the + * WMM Info IE or the WMM Parameter IE. + */ + memcpy((u8 *) &bss_entry->wmm_ie, + current_ptr, total_ie_len); + } + break; + case WLAN_EID_RSN: + bss_entry->bcn_rsn_ie = + (struct ieee_types_generic *) current_ptr; + bss_entry->rsn_offset = (u16) (current_ptr - + bss_entry->beacon_buf); + break; + case WLAN_EID_BSS_AC_ACCESS_DELAY: + bss_entry->bcn_wapi_ie = + (struct ieee_types_generic *) current_ptr; + bss_entry->wapi_offset = (u16) (current_ptr - + bss_entry->beacon_buf); + break; + case WLAN_EID_HT_CAPABILITY: + bss_entry->bcn_ht_cap = (struct ieee80211_ht_cap *) + (current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->ht_cap_offset = (u16) (current_ptr + + sizeof(struct ieee_types_header) - + bss_entry->beacon_buf); + break; + case WLAN_EID_HT_INFORMATION: + bss_entry->bcn_ht_info = (struct ieee80211_ht_info *) + (current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->ht_info_offset = (u16) (current_ptr + + sizeof(struct ieee_types_header) - + bss_entry->beacon_buf); + break; + case WLAN_EID_BSS_COEX_2040: + bss_entry->bcn_bss_co_2040 = (u8 *) (current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->bss_co_2040_offset = (u16) (current_ptr + + sizeof(struct ieee_types_header) - + bss_entry->beacon_buf); + break; + case WLAN_EID_EXT_CAPABILITY: + bss_entry->bcn_ext_cap = (u8 *) (current_ptr + + sizeof(struct ieee_types_header)); + bss_entry->ext_cap_offset = (u16) (current_ptr + + sizeof(struct ieee_types_header) - + bss_entry->beacon_buf); + break; + case WLAN_EID_OVERLAP_BSS_SCAN_PARAM: + bss_entry->bcn_obss_scan = + (struct ieee_types_obss_scan_param *) + current_ptr; + bss_entry->overlap_bss_offset = (u16) (current_ptr - + bss_entry->beacon_buf); + break; + default: + break; + } + + current_ptr += element_len + 2; + + /* Need to account for IE ID and IE Len */ + bytes_left_for_current_beacon -= (element_len + 2); + + } /* while (bytes_left_for_current_beacon > 2) */ + return ret; +} + +/* + * This function adjusts the pointers used in beacon buffers to reflect + * shifts. + * + * The memory allocated for beacon buffers is of fixed sizes where all the + * saved beacons must be stored. New beacons are added in the free portion + * of this memory, space permitting; while duplicate beacon buffers are + * placed at the same start location. However, since duplicate beacon + * buffers may not match the size of the old one, all the following buffers + * in the memory must be shifted to either make space, or to fill up freed + * up space. + * + * This function is used to update the beacon buffer pointers that are past + * an existing beacon buffer that is updated with a new one of different + * size. The pointers are shifted by a fixed amount, either forward or + * backward. + * + * the following pointers in every affected beacon buffers are changed, if + * present - + * - WPA IE pointer + * - RSN IE pointer + * - WAPI IE pointer + * - HT capability IE pointer + * - HT information IE pointer + * - BSS coexistence 20/40 IE pointer + * - Extended capability IE pointer + * - Overlapping BSS scan parameter IE pointer + */ +static void +mwifiex_adjust_beacon_buffer_ptrs(struct mwifiex_private *priv, u8 advance, + u8 *bcn_store, u32 rem_bcn_size, + u32 num_of_ent) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u32 adj_idx; + for (adj_idx = 0; adj_idx < num_of_ent; adj_idx++) { + if (adapter->scan_table[adj_idx].beacon_buf > bcn_store) { + + if (advance) + adapter->scan_table[adj_idx].beacon_buf += + rem_bcn_size; + else + adapter->scan_table[adj_idx].beacon_buf -= + rem_bcn_size; + + if (adapter->scan_table[adj_idx].bcn_wpa_ie) + adapter->scan_table[adj_idx].bcn_wpa_ie = + (struct ieee_types_vendor_specific *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].wpa_offset); + if (adapter->scan_table[adj_idx].bcn_rsn_ie) + adapter->scan_table[adj_idx].bcn_rsn_ie = + (struct ieee_types_generic *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].rsn_offset); + if (adapter->scan_table[adj_idx].bcn_wapi_ie) + adapter->scan_table[adj_idx].bcn_wapi_ie = + (struct ieee_types_generic *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].wapi_offset); + if (adapter->scan_table[adj_idx].bcn_ht_cap) + adapter->scan_table[adj_idx].bcn_ht_cap = + (struct ieee80211_ht_cap *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].ht_cap_offset); + + if (adapter->scan_table[adj_idx].bcn_ht_info) + adapter->scan_table[adj_idx].bcn_ht_info = + (struct ieee80211_ht_info *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].ht_info_offset); + if (adapter->scan_table[adj_idx].bcn_bss_co_2040) + adapter->scan_table[adj_idx].bcn_bss_co_2040 = + (u8 *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].bss_co_2040_offset); + if (adapter->scan_table[adj_idx].bcn_ext_cap) + adapter->scan_table[adj_idx].bcn_ext_cap = + (u8 *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].ext_cap_offset); + if (adapter->scan_table[adj_idx].bcn_obss_scan) + adapter->scan_table[adj_idx].bcn_obss_scan = + (struct ieee_types_obss_scan_param *) + (adapter->scan_table[adj_idx].beacon_buf + + adapter->scan_table[adj_idx].overlap_bss_offset); + } + } +} + +/* + * This function updates the pointers used in beacon buffer for given bss + * descriptor to reflect shifts + * + * Following pointers are updated + * - WPA IE pointer + * - RSN IE pointer + * - WAPI IE pointer + * - HT capability IE pointer + * - HT information IE pointer + * - BSS coexistence 20/40 IE pointer + * - Extended capability IE pointer + * - Overlapping BSS scan parameter IE pointer + */ +static void +mwifiex_update_beacon_buffer_ptrs(struct mwifiex_bssdescriptor *beacon) +{ + if (beacon->bcn_wpa_ie) + beacon->bcn_wpa_ie = (struct ieee_types_vendor_specific *) + (beacon->beacon_buf + beacon->wpa_offset); + if (beacon->bcn_rsn_ie) + beacon->bcn_rsn_ie = (struct ieee_types_generic *) + (beacon->beacon_buf + beacon->rsn_offset); + if (beacon->bcn_wapi_ie) + beacon->bcn_wapi_ie = (struct ieee_types_generic *) + (beacon->beacon_buf + beacon->wapi_offset); + if (beacon->bcn_ht_cap) + beacon->bcn_ht_cap = (struct ieee80211_ht_cap *) + (beacon->beacon_buf + beacon->ht_cap_offset); + if (beacon->bcn_ht_info) + beacon->bcn_ht_info = (struct ieee80211_ht_info *) + (beacon->beacon_buf + beacon->ht_info_offset); + if (beacon->bcn_bss_co_2040) + beacon->bcn_bss_co_2040 = (u8 *) (beacon->beacon_buf + + beacon->bss_co_2040_offset); + if (beacon->bcn_ext_cap) + beacon->bcn_ext_cap = (u8 *) (beacon->beacon_buf + + beacon->ext_cap_offset); + if (beacon->bcn_obss_scan) + beacon->bcn_obss_scan = (struct ieee_types_obss_scan_param *) + (beacon->beacon_buf + beacon->overlap_bss_offset); +} + +/* + * This function stores a beacon or probe response for a BSS returned + * in the scan. + * + * This stores a new scan response or an update for a previous scan response. + * New entries need to verify that they do not exceed the total amount of + * memory allocated for the table. + * + * Replacement entries need to take into consideration the amount of space + * currently allocated for the beacon/probe response and adjust the entry + * as needed. + * + * A small amount of extra pad (SCAN_BEACON_ENTRY_PAD) is generally reserved + * for an entry in case it is a beacon since a probe response for the + * network will by larger per the standard. This helps to reduce the + * amount of memory copying to fit a new probe response into an entry + * already occupied by a network's previously stored beacon. + */ +static void +mwifiex_ret_802_11_scan_store_beacon(struct mwifiex_private *priv, + u32 beacon_idx, u32 num_of_ent, + struct mwifiex_bssdescriptor *new_beacon) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u8 *bcn_store; + u32 new_bcn_size; + u32 old_bcn_size; + u32 bcn_space; + + if (adapter->scan_table[beacon_idx].beacon_buf) { + + new_bcn_size = new_beacon->beacon_buf_size; + old_bcn_size = adapter->scan_table[beacon_idx].beacon_buf_size; + bcn_space = adapter->scan_table[beacon_idx].beacon_buf_size_max; + bcn_store = adapter->scan_table[beacon_idx].beacon_buf; + + /* Set the max to be the same as current entry unless changed + below */ + new_beacon->beacon_buf_size_max = bcn_space; + if (new_bcn_size == old_bcn_size) { + /* + * Beacon is the same size as the previous entry. + * Replace the previous contents with the scan result + */ + memcpy(bcn_store, new_beacon->beacon_buf, + new_beacon->beacon_buf_size); + + } else if (new_bcn_size <= bcn_space) { + /* + * New beacon size will fit in the amount of space + * we have previously allocated for it + */ + + /* Copy the new beacon buffer entry over the old one */ + memcpy(bcn_store, new_beacon->beacon_buf, new_bcn_size); + + /* + * If the old beacon size was less than the maximum + * we had alloted for the entry, and the new entry + * is even smaller, reset the max size to the old + * beacon entry and compress the storage space + * (leaving a new pad space of (old_bcn_size - + * new_bcn_size). + */ + if (old_bcn_size < bcn_space + && new_bcn_size <= old_bcn_size) { + /* + * Old Beacon size is smaller than the alloted + * storage size. Shrink the alloted storage + * space. + */ + dev_dbg(adapter->dev, "info: AppControl:" + " smaller duplicate beacon " + "(%d), old = %d, new = %d, space = %d," + "left = %d\n", + beacon_idx, old_bcn_size, new_bcn_size, + bcn_space, + (int)(sizeof(adapter->bcn_buf) - + (adapter->bcn_buf_end - + adapter->bcn_buf))); + + /* + * memmove (since the memory overlaps) the + * data after the beacon we just stored to the + * end of the current beacon. This cleans up + * any unused space the old larger beacon was + * using in the buffer + */ + memmove(bcn_store + old_bcn_size, + bcn_store + bcn_space, + adapter->bcn_buf_end - (bcn_store + + bcn_space)); + + /* + * Decrement the end pointer by the difference + * between the old larger size and the new + * smaller size since we are using less space + * due to the new beacon being smaller + */ + adapter->bcn_buf_end -= + (bcn_space - old_bcn_size); + + /* Set the maximum storage size to the old + beacon size */ + new_beacon->beacon_buf_size_max = old_bcn_size; + + /* Adjust beacon buffer pointers that are past + the current */ + mwifiex_adjust_beacon_buffer_ptrs(priv, 0, + bcn_store, (bcn_space - old_bcn_size), + num_of_ent); + } + } else if (adapter->bcn_buf_end + (new_bcn_size - bcn_space) + < (adapter->bcn_buf + sizeof(adapter->bcn_buf))) { + /* + * Beacon is larger than space previously allocated + * (bcn_space) and there is enough space left in the + * beaconBuffer to store the additional data + */ + dev_dbg(adapter->dev, "info: AppControl:" + " larger duplicate beacon (%d), " + "old = %d, new = %d, space = %d, left = %d\n", + beacon_idx, old_bcn_size, new_bcn_size, + bcn_space, + (int)(sizeof(adapter->bcn_buf) - + (adapter->bcn_buf_end - + adapter->bcn_buf))); + + /* + * memmove (since the memory overlaps) the data + * after the beacon we just stored to the end of + * the current beacon. This moves the data for + * the beacons after this further in memory to + * make space for the new larger beacon we are + * about to copy in. + */ + memmove(bcn_store + new_bcn_size, + bcn_store + bcn_space, + adapter->bcn_buf_end - (bcn_store + bcn_space)); + + /* Copy the new beacon buffer entry over the old one */ + memcpy(bcn_store, new_beacon->beacon_buf, new_bcn_size); + + /* Move the beacon end pointer by the amount of new + beacon data we are adding */ + adapter->bcn_buf_end += (new_bcn_size - bcn_space); + + /* + * This entry is bigger than the alloted max space + * previously reserved. Increase the max space to + * be equal to the new beacon size + */ + new_beacon->beacon_buf_size_max = new_bcn_size; + + /* Adjust beacon buffer pointers that are past the + current */ + mwifiex_adjust_beacon_buffer_ptrs(priv, 1, bcn_store, + (new_bcn_size - bcn_space), + num_of_ent); + } else { + /* + * Beacon is larger than the previously allocated space, + * but there is not enough free space to store the + * additional data. + */ + dev_err(adapter->dev, "AppControl: larger duplicate " + " beacon (%d), old = %d new = %d, space = %d," + " left = %d\n", beacon_idx, old_bcn_size, + new_bcn_size, bcn_space, + (int)(sizeof(adapter->bcn_buf) - + (adapter->bcn_buf_end - adapter->bcn_buf))); + + /* Storage failure, keep old beacon intact */ + new_beacon->beacon_buf_size = old_bcn_size; + if (new_beacon->bcn_wpa_ie) + new_beacon->wpa_offset = + adapter->scan_table[beacon_idx]. + wpa_offset; + if (new_beacon->bcn_rsn_ie) + new_beacon->rsn_offset = + adapter->scan_table[beacon_idx]. + rsn_offset; + if (new_beacon->bcn_wapi_ie) + new_beacon->wapi_offset = + adapter->scan_table[beacon_idx]. + wapi_offset; + if (new_beacon->bcn_ht_cap) + new_beacon->ht_cap_offset = + adapter->scan_table[beacon_idx]. + ht_cap_offset; + if (new_beacon->bcn_ht_info) + new_beacon->ht_info_offset = + adapter->scan_table[beacon_idx]. + ht_info_offset; + if (new_beacon->bcn_bss_co_2040) + new_beacon->bss_co_2040_offset = + adapter->scan_table[beacon_idx]. + bss_co_2040_offset; + if (new_beacon->bcn_ext_cap) + new_beacon->ext_cap_offset = + adapter->scan_table[beacon_idx]. + ext_cap_offset; + if (new_beacon->bcn_obss_scan) + new_beacon->overlap_bss_offset = + adapter->scan_table[beacon_idx]. + overlap_bss_offset; + } + /* Point the new entry to its permanent storage space */ + new_beacon->beacon_buf = bcn_store; + mwifiex_update_beacon_buffer_ptrs(new_beacon); + } else { + /* + * No existing beacon data exists for this entry, check to see + * if we can fit it in the remaining space + */ + if (adapter->bcn_buf_end + new_beacon->beacon_buf_size + + SCAN_BEACON_ENTRY_PAD < (adapter->bcn_buf + + sizeof(adapter->bcn_buf))) { + + /* + * Copy the beacon buffer data from the local entry to + * the adapter dev struct buffer space used to store + * the raw beacon data for each entry in the scan table + */ + memcpy(adapter->bcn_buf_end, new_beacon->beacon_buf, + new_beacon->beacon_buf_size); + + /* Update the beacon ptr to point to the table save + area */ + new_beacon->beacon_buf = adapter->bcn_buf_end; + new_beacon->beacon_buf_size_max = + (new_beacon->beacon_buf_size + + SCAN_BEACON_ENTRY_PAD); + + mwifiex_update_beacon_buffer_ptrs(new_beacon); + + /* Increment the end pointer by the size reserved */ + adapter->bcn_buf_end += new_beacon->beacon_buf_size_max; + + dev_dbg(adapter->dev, "info: AppControl: beacon[%02d]" + " sz=%03d, used = %04d, left = %04d\n", + beacon_idx, + new_beacon->beacon_buf_size, + (int)(adapter->bcn_buf_end - adapter->bcn_buf), + (int)(sizeof(adapter->bcn_buf) - + (adapter->bcn_buf_end - + adapter->bcn_buf))); + } else { + /* No space for new beacon */ + dev_dbg(adapter->dev, "info: AppControl: no space for" + " beacon (%d): %pM sz=%03d, left=%03d\n", + beacon_idx, new_beacon->mac_address, + new_beacon->beacon_buf_size, + (int)(sizeof(adapter->bcn_buf) - + (adapter->bcn_buf_end - + adapter->bcn_buf))); + + /* Storage failure; clear storage records for this + bcn */ + new_beacon->beacon_buf = NULL; + new_beacon->beacon_buf_size = 0; + new_beacon->beacon_buf_size_max = 0; + new_beacon->bcn_wpa_ie = NULL; + new_beacon->wpa_offset = 0; + new_beacon->bcn_rsn_ie = NULL; + new_beacon->rsn_offset = 0; + new_beacon->bcn_wapi_ie = NULL; + new_beacon->wapi_offset = 0; + new_beacon->bcn_ht_cap = NULL; + new_beacon->ht_cap_offset = 0; + new_beacon->bcn_ht_info = NULL; + new_beacon->ht_info_offset = 0; + new_beacon->bcn_bss_co_2040 = NULL; + new_beacon->bss_co_2040_offset = 0; + new_beacon->bcn_ext_cap = NULL; + new_beacon->ext_cap_offset = 0; + new_beacon->bcn_obss_scan = NULL; + new_beacon->overlap_bss_offset = 0; + } + } +} + +/* + * This function restores a beacon buffer of the current BSS descriptor. + */ +static void mwifiex_restore_curr_bcn(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_bssdescriptor *curr_bss = + &priv->curr_bss_params.bss_descriptor; + unsigned long flags; + + if (priv->curr_bcn_buf && + ((adapter->bcn_buf_end + priv->curr_bcn_size) < + (adapter->bcn_buf + sizeof(adapter->bcn_buf)))) { + spin_lock_irqsave(&priv->curr_bcn_buf_lock, flags); + + /* restore the current beacon buffer */ + memcpy(adapter->bcn_buf_end, priv->curr_bcn_buf, + priv->curr_bcn_size); + curr_bss->beacon_buf = adapter->bcn_buf_end; + curr_bss->beacon_buf_size = priv->curr_bcn_size; + adapter->bcn_buf_end += priv->curr_bcn_size; + + /* adjust the pointers in the current BSS descriptor */ + if (curr_bss->bcn_wpa_ie) + curr_bss->bcn_wpa_ie = + (struct ieee_types_vendor_specific *) + (curr_bss->beacon_buf + + curr_bss->wpa_offset); + + if (curr_bss->bcn_rsn_ie) + curr_bss->bcn_rsn_ie = (struct ieee_types_generic *) + (curr_bss->beacon_buf + + curr_bss->rsn_offset); + + if (curr_bss->bcn_ht_cap) + curr_bss->bcn_ht_cap = (struct ieee80211_ht_cap *) + (curr_bss->beacon_buf + + curr_bss->ht_cap_offset); + + if (curr_bss->bcn_ht_info) + curr_bss->bcn_ht_info = (struct ieee80211_ht_info *) + (curr_bss->beacon_buf + + curr_bss->ht_info_offset); + + if (curr_bss->bcn_bss_co_2040) + curr_bss->bcn_bss_co_2040 = + (u8 *) (curr_bss->beacon_buf + + curr_bss->bss_co_2040_offset); + + if (curr_bss->bcn_ext_cap) + curr_bss->bcn_ext_cap = (u8 *) (curr_bss->beacon_buf + + curr_bss->ext_cap_offset); + + if (curr_bss->bcn_obss_scan) + curr_bss->bcn_obss_scan = + (struct ieee_types_obss_scan_param *) + (curr_bss->beacon_buf + + curr_bss->overlap_bss_offset); + + spin_unlock_irqrestore(&priv->curr_bcn_buf_lock, flags); + + dev_dbg(adapter->dev, "info: current beacon restored %d\n", + priv->curr_bcn_size); + } else { + dev_warn(adapter->dev, + "curr_bcn_buf not saved or bcn_buf has no space\n"); + } +} + +/* + * This function post processes the scan table after a new scan command has + * completed. + * + * It inspects each entry of the scan table and tries to find an entry that + * matches with our current associated/joined network from the scan. If + * one is found, the stored copy of the BSS descriptor of our current network + * is updated. + * + * It also debug dumps the current scan table contents after processing is over. + */ +static void +mwifiex_process_scan_results(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + s32 j; + u32 i; + unsigned long flags; + + if (priv->media_connected) { + + j = mwifiex_find_ssid_in_list(priv, &priv->curr_bss_params. + bss_descriptor.ssid, + priv->curr_bss_params. + bss_descriptor.mac_address, + priv->bss_mode); + + if (j >= 0) { + spin_lock_irqsave(&priv->curr_bcn_buf_lock, flags); + priv->curr_bss_params.bss_descriptor.bcn_wpa_ie = NULL; + priv->curr_bss_params.bss_descriptor.wpa_offset = 0; + priv->curr_bss_params.bss_descriptor.bcn_rsn_ie = NULL; + priv->curr_bss_params.bss_descriptor.rsn_offset = 0; + priv->curr_bss_params.bss_descriptor.bcn_wapi_ie = NULL; + priv->curr_bss_params.bss_descriptor.wapi_offset = 0; + priv->curr_bss_params.bss_descriptor.bcn_ht_cap = NULL; + priv->curr_bss_params.bss_descriptor.ht_cap_offset = + 0; + priv->curr_bss_params.bss_descriptor.bcn_ht_info = NULL; + priv->curr_bss_params.bss_descriptor.ht_info_offset = + 0; + priv->curr_bss_params.bss_descriptor.bcn_bss_co_2040 = + NULL; + priv->curr_bss_params.bss_descriptor. + bss_co_2040_offset = 0; + priv->curr_bss_params.bss_descriptor.bcn_ext_cap = NULL; + priv->curr_bss_params.bss_descriptor.ext_cap_offset = 0; + priv->curr_bss_params.bss_descriptor. + bcn_obss_scan = NULL; + priv->curr_bss_params.bss_descriptor. + overlap_bss_offset = 0; + priv->curr_bss_params.bss_descriptor.beacon_buf = NULL; + priv->curr_bss_params.bss_descriptor.beacon_buf_size = + 0; + priv->curr_bss_params.bss_descriptor. + beacon_buf_size_max = 0; + + dev_dbg(adapter->dev, "info: Found current ssid/bssid" + " in list @ index #%d\n", j); + /* Make a copy of current BSSID descriptor */ + memcpy(&priv->curr_bss_params.bss_descriptor, + &adapter->scan_table[j], + sizeof(priv->curr_bss_params.bss_descriptor)); + + mwifiex_save_curr_bcn(priv); + spin_unlock_irqrestore(&priv->curr_bcn_buf_lock, flags); + + } else { + mwifiex_restore_curr_bcn(priv); + } + } + + for (i = 0; i < adapter->num_in_scan_table; i++) + dev_dbg(adapter->dev, "info: scan:(%02d) %pM " + "RSSI[%03d], SSID[%s]\n", + i, adapter->scan_table[i].mac_address, + (s32) adapter->scan_table[i].rssi, + adapter->scan_table[i].ssid.ssid); +} + +/* + * This function converts radio type scan parameter to a band configuration + * to be used in join command. + */ +static u8 +mwifiex_radio_type_to_band(u8 radio_type) +{ + u8 ret_band; + + switch (radio_type) { + case HostCmd_SCAN_RADIO_TYPE_A: + ret_band = BAND_A; + break; + case HostCmd_SCAN_RADIO_TYPE_BG: + default: + ret_band = BAND_G; + break; + } + + return ret_band; +} + +/* + * This function deletes a specific indexed entry from the scan table. + * + * This also compacts the remaining entries and adjusts any buffering + * of beacon/probe response data if needed. + */ +static void +mwifiex_scan_delete_table_entry(struct mwifiex_private *priv, s32 table_idx) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u32 del_idx; + u32 beacon_buf_adj; + u8 *beacon_buf; + + /* + * Shift the saved beacon buffer data for the scan table back over the + * entry being removed. Update the end of buffer pointer. Save the + * deleted buffer allocation size for pointer adjustments for entries + * compacted after the deleted index. + */ + beacon_buf_adj = adapter->scan_table[table_idx].beacon_buf_size_max; + + dev_dbg(adapter->dev, "info: Scan: Delete Entry %d, beacon buffer " + "removal = %d bytes\n", table_idx, beacon_buf_adj); + + /* Check if the table entry had storage allocated for its beacon */ + if (beacon_buf_adj) { + beacon_buf = adapter->scan_table[table_idx].beacon_buf; + + /* + * Remove the entry's buffer space, decrement the table end + * pointer by the amount we are removing + */ + adapter->bcn_buf_end -= beacon_buf_adj; + + dev_dbg(adapter->dev, "info: scan: delete entry %d," + " compact data: %p <- %p (sz = %d)\n", + table_idx, beacon_buf, + beacon_buf + beacon_buf_adj, + (int)(adapter->bcn_buf_end - beacon_buf)); + + /* + * Compact data storage. Copy all data after the deleted + * entry's end address (beacon_buf + beacon_buf_adj) back + * to the original start address (beacon_buf). + * + * Scan table entries affected by the move will have their + * entry pointer adjusted below. + * + * Use memmove since the dest/src memory regions overlap. + */ + memmove(beacon_buf, beacon_buf + beacon_buf_adj, + adapter->bcn_buf_end - beacon_buf); + } + + dev_dbg(adapter->dev, + "info: Scan: Delete Entry %d, num_in_scan_table = %d\n", + table_idx, adapter->num_in_scan_table); + + /* Shift all of the entries after the table_idx back by one, compacting + the table and removing the requested entry */ + for (del_idx = table_idx; (del_idx + 1) < adapter->num_in_scan_table; + del_idx++) { + /* Copy the next entry over this one */ + memcpy(adapter->scan_table + del_idx, + adapter->scan_table + del_idx + 1, + sizeof(struct mwifiex_bssdescriptor)); + + /* + * Adjust this entry's pointer to its beacon buffer based on + * the removed/compacted entry from the deleted index. Don't + * decrement if the buffer pointer is NULL (no data stored for + * this entry). + */ + if (adapter->scan_table[del_idx].beacon_buf) { + adapter->scan_table[del_idx].beacon_buf -= + beacon_buf_adj; + if (adapter->scan_table[del_idx].bcn_wpa_ie) + adapter->scan_table[del_idx].bcn_wpa_ie = + (struct ieee_types_vendor_specific *) + (adapter->scan_table[del_idx]. + beacon_buf + + adapter->scan_table[del_idx]. + wpa_offset); + if (adapter->scan_table[del_idx].bcn_rsn_ie) + adapter->scan_table[del_idx].bcn_rsn_ie = + (struct ieee_types_generic *) + (adapter->scan_table[del_idx]. + beacon_buf + + adapter->scan_table[del_idx]. + rsn_offset); + if (adapter->scan_table[del_idx].bcn_wapi_ie) + adapter->scan_table[del_idx].bcn_wapi_ie = + (struct ieee_types_generic *) + (adapter->scan_table[del_idx].beacon_buf + + adapter->scan_table[del_idx]. + wapi_offset); + if (adapter->scan_table[del_idx].bcn_ht_cap) + adapter->scan_table[del_idx].bcn_ht_cap = + (struct ieee80211_ht_cap *) + (adapter->scan_table[del_idx].beacon_buf + + adapter->scan_table[del_idx]. + ht_cap_offset); + + if (adapter->scan_table[del_idx].bcn_ht_info) + adapter->scan_table[del_idx].bcn_ht_info = + (struct ieee80211_ht_info *) + (adapter->scan_table[del_idx].beacon_buf + + adapter->scan_table[del_idx]. + ht_info_offset); + if (adapter->scan_table[del_idx].bcn_bss_co_2040) + adapter->scan_table[del_idx].bcn_bss_co_2040 = + (u8 *) + (adapter->scan_table[del_idx].beacon_buf + + adapter->scan_table[del_idx]. + bss_co_2040_offset); + if (adapter->scan_table[del_idx].bcn_ext_cap) + adapter->scan_table[del_idx].bcn_ext_cap = + (u8 *) + (adapter->scan_table[del_idx].beacon_buf + + adapter->scan_table[del_idx]. + ext_cap_offset); + if (adapter->scan_table[del_idx].bcn_obss_scan) + adapter->scan_table[del_idx]. + bcn_obss_scan = + (struct ieee_types_obss_scan_param *) + (adapter->scan_table[del_idx].beacon_buf + + adapter->scan_table[del_idx]. + overlap_bss_offset); + } + } + + /* The last entry is invalid now that it has been deleted or moved + back */ + memset(adapter->scan_table + adapter->num_in_scan_table - 1, + 0x00, sizeof(struct mwifiex_bssdescriptor)); + + adapter->num_in_scan_table--; +} + +/* + * This function deletes all occurrences of a given SSID from the scan table. + * + * This iterates through the scan table and deletes all entries that match + * the given SSID. It also compacts the remaining scan table entries. + */ +static int +mwifiex_scan_delete_ssid_table_entry(struct mwifiex_private *priv, + struct mwifiex_802_11_ssid *del_ssid) +{ + int ret = -1; + s32 table_idx; + + dev_dbg(priv->adapter->dev, "info: scan: delete ssid entry: %-32s\n", + del_ssid->ssid); + + /* If the requested SSID is found in the table, delete it. Then keep + searching the table for multiple entires for the SSID until no + more are found */ + while ((table_idx = mwifiex_find_ssid_in_list(priv, del_ssid, NULL, + NL80211_IFTYPE_UNSPECIFIED)) >= 0) { + dev_dbg(priv->adapter->dev, + "info: Scan: Delete SSID Entry: Found Idx = %d\n", + table_idx); + ret = 0; + mwifiex_scan_delete_table_entry(priv, table_idx); + } + + return ret; +} + +/* + * This is an internal function used to start a scan based on an input + * configuration. + * + * This uses the input user scan configuration information when provided in + * order to send the appropriate scan commands to firmware to populate or + * update the internal driver scan table. + */ +int mwifiex_scan_networks(struct mwifiex_private *priv, + void *wait_buf, u16 action, + const struct mwifiex_user_scan_cfg *user_scan_in, + struct mwifiex_scan_resp *scan_resp) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct cmd_ctrl_node *cmd_node = NULL; + union mwifiex_scan_cmd_config_tlv *scan_cfg_out = NULL; + struct mwifiex_ie_types_chan_list_param_set *chan_list_out; + u32 buf_size; + struct mwifiex_chan_scan_param_set *scan_chan_list; + u8 keep_previous_scan; + u8 filtered_scan; + u8 scan_current_chan_only; + u8 max_chan_per_scan; + unsigned long flags; + + if (action == HostCmd_ACT_GEN_GET) { + if (scan_resp) { + scan_resp->scan_table = (u8 *) adapter->scan_table; + scan_resp->num_in_scan_table = + adapter->num_in_scan_table; + } else { + ret = -1; + } + return ret; + } + + if (adapter->scan_processing && action == HostCmd_ACT_GEN_SET) { + dev_dbg(adapter->dev, "cmd: Scan already in process...\n"); + return ret; + } + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->scan_processing = true; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + + if (priv->scan_block && action == HostCmd_ACT_GEN_SET) { + dev_dbg(adapter->dev, + "cmd: Scan is blocked during association...\n"); + return ret; + } + + scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv), + GFP_KERNEL); + if (!scan_cfg_out) { + dev_err(adapter->dev, "failed to alloc scan_cfg_out\n"); + return -1; + } + + buf_size = sizeof(struct mwifiex_chan_scan_param_set) * + MWIFIEX_USER_SCAN_CHAN_MAX; + scan_chan_list = kzalloc(buf_size, GFP_KERNEL); + if (!scan_chan_list) { + dev_err(adapter->dev, "failed to alloc scan_chan_list\n"); + kfree(scan_cfg_out); + return -1; + } + + keep_previous_scan = false; + + mwifiex_scan_setup_scan_config(priv, user_scan_in, + &scan_cfg_out->config, &chan_list_out, + scan_chan_list, &max_chan_per_scan, + &filtered_scan, &scan_current_chan_only); + + if (user_scan_in) + keep_previous_scan = user_scan_in->keep_previous_scan; + + + if (!keep_previous_scan) { + memset(adapter->scan_table, 0x00, + sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP); + adapter->num_in_scan_table = 0; + adapter->bcn_buf_end = adapter->bcn_buf; + } + + ret = mwifiex_scan_channel_list(priv, wait_buf, max_chan_per_scan, + filtered_scan, &scan_cfg_out->config, + chan_list_out, scan_chan_list); + + /* Get scan command from scan_pending_q and put to cmd_pending_q */ + if (!ret) { + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + if (!list_empty(&adapter->scan_pending_q)) { + cmd_node = list_first_entry(&adapter->scan_pending_q, + struct cmd_ctrl_node, list); + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, + flags); + mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, + true); + } else { + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, + flags); + } + ret = -EINPROGRESS; + } else { + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->scan_processing = true; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + } + + kfree(scan_cfg_out); + kfree(scan_chan_list); + return ret; +} + +/* + * This function prepares a scan command to be sent to the firmware. + * + * This uses the scan command configuration sent to the command processing + * module in command preparation stage to configure a scan command structure + * to send to firmware. + * + * The fixed fields specifying the BSS type and BSSID filters as well as a + * variable number/length of TLVs are sent in the command to firmware. + * + * Preparation also includes - + * - Setting command ID, and proper size + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_802_11_scan(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, void *data_buf) +{ + struct host_cmd_ds_802_11_scan *scan_cmd = &cmd->params.scan; + struct mwifiex_scan_cmd_config *scan_cfg; + + scan_cfg = (struct mwifiex_scan_cmd_config *) data_buf; + + /* Set fixed field variables in scan command */ + scan_cmd->bss_mode = scan_cfg->bss_mode; + memcpy(scan_cmd->bssid, scan_cfg->specific_bssid, + sizeof(scan_cmd->bssid)); + memcpy(scan_cmd->tlv_buffer, scan_cfg->tlv_buf, scan_cfg->tlv_buf_len); + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SCAN); + + /* Size is equal to the sizeof(fixed portions) + the TLV len + header */ + cmd->size = cpu_to_le16((u16) (sizeof(scan_cmd->bss_mode) + + sizeof(scan_cmd->bssid) + + scan_cfg->tlv_buf_len + S_DS_GEN)); + + return 0; +} + +/* + * This function handles the command response of scan. + * + * The response buffer for the scan command has the following + * memory layout: + * + * .-------------------------------------------------------------. + * | Header (4 * sizeof(t_u16)): Standard command response hdr | + * .-------------------------------------------------------------. + * | BufSize (t_u16) : sizeof the BSS Description data | + * .-------------------------------------------------------------. + * | NumOfSet (t_u8) : Number of BSS Descs returned | + * .-------------------------------------------------------------. + * | BSSDescription data (variable, size given in BufSize) | + * .-------------------------------------------------------------. + * | TLV data (variable, size calculated using Header->Size, | + * | BufSize and sizeof the fixed fields above) | + * .-------------------------------------------------------------. + */ +int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, void *wq_buf) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_wait_queue *wait_queue = NULL; + struct cmd_ctrl_node *cmd_node = NULL; + struct host_cmd_ds_802_11_scan_rsp *scan_rsp = NULL; + struct mwifiex_bssdescriptor *bss_new_entry = NULL; + struct mwifiex_ie_types_data *tlv_data; + struct mwifiex_ie_types_tsf_timestamp *tsf_tlv; + u8 *bss_info; + u32 scan_resp_size; + u32 bytes_left; + u32 num_in_table; + u32 bss_idx; + u32 idx; + u32 tlv_buf_size; + long long tsf_val; + struct mwifiex_chan_freq_power *cfp; + struct mwifiex_ie_types_chan_band_list_param_set *chan_band_tlv; + struct chan_band_param_set *chan_band; + u8 band; + u8 is_bgscan_resp; + unsigned long flags; + + is_bgscan_resp = (le16_to_cpu(resp->command) + == HostCmd_CMD_802_11_BG_SCAN_QUERY); + if (is_bgscan_resp) + scan_rsp = &resp->params.bg_scan_query_resp.scan_resp; + else + scan_rsp = &resp->params.scan_resp; + + + if (scan_rsp->number_of_sets > IW_MAX_AP) { + dev_err(adapter->dev, "SCAN_RESP: too many AP returned (%d)\n", + scan_rsp->number_of_sets); + ret = -1; + goto done; + } + + bytes_left = le16_to_cpu(scan_rsp->bss_descript_size); + dev_dbg(adapter->dev, "info: SCAN_RESP: bss_descript_size %d\n", + bytes_left); + + scan_resp_size = le16_to_cpu(resp->size); + + dev_dbg(adapter->dev, + "info: SCAN_RESP: returned %d APs before parsing\n", + scan_rsp->number_of_sets); + + num_in_table = adapter->num_in_scan_table; + bss_info = scan_rsp->bss_desc_and_tlv_buffer; + + /* + * The size of the TLV buffer is equal to the entire command response + * size (scan_resp_size) minus the fixed fields (sizeof()'s), the + * BSS Descriptions (bss_descript_size as bytesLef) and the command + * response header (S_DS_GEN) + */ + tlv_buf_size = scan_resp_size - (bytes_left + + sizeof(scan_rsp->bss_descript_size) + + sizeof(scan_rsp->number_of_sets) + + S_DS_GEN); + + tlv_data = (struct mwifiex_ie_types_data *) (scan_rsp-> + bss_desc_and_tlv_buffer + + bytes_left); + + /* Search the TLV buffer space in the scan response for any valid + TLVs */ + mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size, + TLV_TYPE_TSFTIMESTAMP, + (struct mwifiex_ie_types_data **) + &tsf_tlv); + + /* Search the TLV buffer space in the scan response for any valid + TLVs */ + mwifiex_ret_802_11_scan_get_tlv_ptrs(adapter, tlv_data, tlv_buf_size, + TLV_TYPE_CHANNELBANDLIST, + (struct mwifiex_ie_types_data **) + &chan_band_tlv); + + /* + * Process each scan response returned (scan_rsp->number_of_sets). + * Save the information in the bss_new_entry and then insert into the + * driver scan table either as an update to an existing entry + * or as an addition at the end of the table + */ + bss_new_entry = kzalloc(sizeof(struct mwifiex_bssdescriptor), + GFP_KERNEL); + if (!bss_new_entry) { + dev_err(adapter->dev, " failed to alloc bss_new_entry\n"); + return -1; + } + + for (idx = 0; idx < scan_rsp->number_of_sets && bytes_left; idx++) { + /* Zero out the bss_new_entry we are about to store info in */ + memset(bss_new_entry, 0x00, + sizeof(struct mwifiex_bssdescriptor)); + + if (mwifiex_interpret_bss_desc_with_ie(adapter, bss_new_entry, + &bss_info, + &bytes_left)) { + /* Error parsing/interpreting scan response, skipped */ + dev_err(adapter->dev, "SCAN_RESP: " + "mwifiex_interpret_bss_desc_with_ie " + "returned ERROR\n"); + continue; + } + + /* Process the data fields and IEs returned for this BSS */ + dev_dbg(adapter->dev, "info: SCAN_RESP: BSSID = %pM\n", + bss_new_entry->mac_address); + + /* Search the scan table for the same bssid */ + for (bss_idx = 0; bss_idx < num_in_table; bss_idx++) { + if (memcmp(bss_new_entry->mac_address, + adapter->scan_table[bss_idx].mac_address, + sizeof(bss_new_entry->mac_address))) { + continue; + } + /* + * If the SSID matches as well, it is a + * duplicate of this entry. Keep the bss_idx + * set to this entry so we replace the old + * contents in the table + */ + if ((bss_new_entry->ssid.ssid_len + == adapter->scan_table[bss_idx]. ssid.ssid_len) + && (!memcmp(bss_new_entry->ssid.ssid, + adapter->scan_table[bss_idx].ssid.ssid, + bss_new_entry->ssid.ssid_len))) { + dev_dbg(adapter->dev, "info: SCAN_RESP:" + " duplicate of index: %d\n", bss_idx); + break; + } + } + /* + * If the bss_idx is equal to the number of entries in + * the table, the new entry was not a duplicate; append + * it to the scan table + */ + if (bss_idx == num_in_table) { + /* Range check the bss_idx, keep it limited to + the last entry */ + if (bss_idx == IW_MAX_AP) + bss_idx--; + else + num_in_table++; + } + + /* + * Save the beacon/probe response returned for later application + * retrieval. Duplicate beacon/probe responses are updated if + * possible + */ + mwifiex_ret_802_11_scan_store_beacon(priv, bss_idx, + num_in_table, bss_new_entry); + /* + * If the TSF TLV was appended to the scan results, save this + * entry's TSF value in the networkTSF field.The networkTSF is + * the firmware's TSF value at the time the beacon or probe + * response was received. + */ + if (tsf_tlv) { + memcpy(&tsf_val, &tsf_tlv->tsf_data[idx * TSF_DATA_SIZE] + , sizeof(tsf_val)); + memcpy(&bss_new_entry->network_tsf, &tsf_val, + sizeof(bss_new_entry->network_tsf)); + } + band = BAND_G; + if (chan_band_tlv) { + chan_band = &chan_band_tlv->chan_band_param[idx]; + band = mwifiex_radio_type_to_band(chan_band->radio_type + & (BIT(0) | BIT(1))); + } + + /* Save the band designation for this entry for use in join */ + bss_new_entry->bss_band = band; + cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv, + (u8) bss_new_entry->bss_band, + (u16)bss_new_entry->channel); + + if (cfp) + bss_new_entry->freq = cfp->freq; + else + bss_new_entry->freq = 0; + + /* Copy the locally created bss_new_entry to the scan table */ + memcpy(&adapter->scan_table[bss_idx], bss_new_entry, + sizeof(adapter->scan_table[bss_idx])); + + } + + dev_dbg(adapter->dev, + "info: SCAN_RESP: Scanned %2d APs, %d valid, %d total\n", + scan_rsp->number_of_sets, + num_in_table - adapter->num_in_scan_table, num_in_table); + + /* Update the total number of BSSIDs in the scan table */ + adapter->num_in_scan_table = num_in_table; + + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + if (list_empty(&adapter->scan_pending_q)) { + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->scan_processing = false; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + /* + * Process the resulting scan table: + * - Remove any bad ssids + * - Update our current BSS information from scan data + */ + mwifiex_process_scan_results(priv); + + /* Need to indicate IOCTL complete */ + wait_queue = (struct mwifiex_wait_queue *) wq_buf; + if (wait_queue) { + wait_queue->status = MWIFIEX_ERROR_NO_ERROR; + + /* Indicate ioctl complete */ + mwifiex_ioctl_complete(adapter, + (struct mwifiex_wait_queue *) wait_queue, 0); + } + if (priv->report_scan_result) + priv->report_scan_result = false; + if (priv->scan_pending_on_block) { + priv->scan_pending_on_block = false; + up(&priv->async_sem); + } + + } else { + /* Get scan command from scan_pending_q and put to + cmd_pending_q */ + cmd_node = list_first_entry(&adapter->scan_pending_q, + struct cmd_ctrl_node, list); + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); + + mwifiex_insert_cmd_to_pending_q(adapter, cmd_node, true); + } + +done: + kfree((u8 *) bss_new_entry); + return ret; +} + +/* + * This function prepares command for background scan query. + * + * Preparation includes - + * - Setting command ID and proper size + * - Setting background scan flush parameter + * - Ensuring correct endian-ness + */ +int mwifiex_cmd_802_11_bg_scan_query(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf) +{ + struct host_cmd_ds_802_11_bg_scan_query *bg_query = + &cmd->params.bg_scan_query; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_BG_SCAN_QUERY); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_bg_scan_query) + + S_DS_GEN); + + bg_query->flush = 1; + + return 0; +} + +/* + * This function finds a SSID in the scan table. + * + * A BSSID may optionally be provided to qualify the SSID. + * For non-Auto mode, further check is made to make sure the + * BSS found in the scan table is compatible with the current + * settings of the driver. + */ +s32 +mwifiex_find_ssid_in_list(struct mwifiex_private *priv, + struct mwifiex_802_11_ssid *ssid, u8 *bssid, + u32 mode) +{ + struct mwifiex_adapter *adapter = priv->adapter; + s32 net = -1, j; + u8 best_rssi = 0; + u32 i; + + dev_dbg(adapter->dev, "info: num of entries in table = %d\n", + adapter->num_in_scan_table); + + /* + * Loop through the table until the maximum is reached or until a match + * is found based on the bssid field comparison + */ + for (i = 0; + i < adapter->num_in_scan_table && (!bssid || (bssid && net < 0)); + i++) { + if (!mwifiex_ssid_cmp(&adapter->scan_table[i].ssid, ssid) && + (!bssid + || !memcmp(adapter->scan_table[i].mac_address, bssid, + ETH_ALEN)) + && + (mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, (u8) adapter->scan_table[i].bss_band, + (u16) adapter->scan_table[i].channel))) { + switch (mode) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + j = mwifiex_is_network_compatible(priv, i, + mode); + + if (j >= 0) { + if (SCAN_RSSI + (adapter->scan_table[i].rssi) > + best_rssi) { + best_rssi = SCAN_RSSI(adapter-> + scan_table + [i].rssi); + net = i; + } + } else { + if (net == -1) + net = j; + } + break; + case NL80211_IFTYPE_UNSPECIFIED: + default: + /* + * Do not check compatibility if the mode + * requested is Auto/Unknown. Allows generic + * find to work without verifying against the + * Adapter security settings + */ + if (SCAN_RSSI(adapter->scan_table[i].rssi) > + best_rssi) { + best_rssi = SCAN_RSSI(adapter-> + scan_table[i].rssi); + net = i; + } + break; + } + } + } + + return net; +} + +/* + * This function finds a specific compatible BSSID in the scan list. + * + * This function loops through the scan table looking for a compatible + * match. If a BSSID matches, but the BSS is found to be not compatible + * the function ignores it and continues to search through the rest of + * the entries in case there is an AP with multiple SSIDs assigned to + * the same BSSID. + */ +s32 +mwifiex_find_bssid_in_list(struct mwifiex_private *priv, u8 *bssid, + u32 mode) +{ + struct mwifiex_adapter *adapter = priv->adapter; + s32 net = -1; + u32 i; + + if (!bssid) + return -1; + + dev_dbg(adapter->dev, "info: FindBSSID: Num of BSSIDs = %d\n", + adapter->num_in_scan_table); + + /* + * Look through the scan table for a compatible match. The ret return + * variable will be equal to the index in the scan table (greater + * than zero) if the network is compatible. The loop will continue + * past a matched bssid that is not compatible in case there is an + * AP with multiple SSIDs assigned to the same BSSID + */ + for (i = 0; net < 0 && i < adapter->num_in_scan_table; i++) { + if (!memcmp + (adapter->scan_table[i].mac_address, bssid, ETH_ALEN) + && mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, + (u8) adapter-> + scan_table[i]. + bss_band, + (u16) adapter-> + scan_table[i]. + channel)) { + switch (mode) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + net = mwifiex_is_network_compatible(priv, i, + mode); + break; + default: + net = i; + break; + } + } + } + + return net; +} + +/* + * This function inserts scan command node to the scan pending queue. + */ +void +mwifiex_queue_scan_cmd(struct mwifiex_private *priv, + struct cmd_ctrl_node *cmd_node) +{ + struct mwifiex_adapter *adapter = priv->adapter; + unsigned long flags; + + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + list_add_tail(&cmd_node->list, &adapter->scan_pending_q); + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); +} + +/* + * This function finds an AP with specific ssid in the scan list. + */ +int mwifiex_find_best_network(struct mwifiex_private *priv, + struct mwifiex_ssid_bssid *req_ssid_bssid) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_bssdescriptor *req_bss; + s32 i; + + memset(req_ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid)); + + i = mwifiex_find_best_network_in_list(priv); + + if (i >= 0) { + req_bss = &adapter->scan_table[i]; + memcpy(&req_ssid_bssid->ssid, &req_bss->ssid, + sizeof(struct mwifiex_802_11_ssid)); + memcpy((u8 *) &req_ssid_bssid->bssid, + (u8 *) &req_bss->mac_address, ETH_ALEN); + + /* Make sure we are in the right mode */ + if (priv->bss_mode == NL80211_IFTYPE_UNSPECIFIED) + priv->bss_mode = req_bss->bss_mode; + } + + if (!req_ssid_bssid->ssid.ssid_len) + return -1; + + dev_dbg(adapter->dev, "info: Best network found = [%s], " + "[%pM]\n", req_ssid_bssid->ssid.ssid, + req_ssid_bssid->bssid); + + return 0; +} + +/* + * This function sends a scan command for all available channels to the + * firmware, filtered on a specific SSID. + */ +static int mwifiex_scan_specific_ssid(struct mwifiex_private *priv, + void *wait_buf, u16 action, + struct mwifiex_802_11_ssid *req_ssid, + struct mwifiex_scan_resp *scan_resp) +{ + struct mwifiex_adapter *adapter = priv->adapter; + int ret = 0; + struct mwifiex_user_scan_cfg *scan_cfg; + + if (!req_ssid) + return -1; + + if (action == HostCmd_ACT_GEN_GET) { + if (scan_resp) { + scan_resp->scan_table = + (u8 *) &priv->curr_bss_params.bss_descriptor; + scan_resp->num_in_scan_table = + adapter->num_in_scan_table; + } else { + ret = -1; + } + return ret; + } + + if (adapter->scan_processing && action == HostCmd_ACT_GEN_SET) { + dev_dbg(adapter->dev, "cmd: Scan already in process...\n"); + return ret; + } + + if (priv->scan_block && action == HostCmd_ACT_GEN_SET) { + dev_dbg(adapter->dev, + "cmd: Scan is blocked during association...\n"); + return ret; + } + + mwifiex_scan_delete_ssid_table_entry(priv, req_ssid); + + scan_cfg = kzalloc(sizeof(struct mwifiex_user_scan_cfg), GFP_KERNEL); + if (!scan_cfg) { + dev_err(adapter->dev, "failed to alloc scan_cfg\n"); + return -1; + } + + memcpy(scan_cfg->ssid_list[0].ssid, req_ssid->ssid, + req_ssid->ssid_len); + scan_cfg->keep_previous_scan = true; + + ret = mwifiex_scan_networks(priv, wait_buf, action, scan_cfg, NULL); + + kfree(scan_cfg); + return ret; +} + +/* + * Sends IOCTL request to start a scan. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + * + * Scan command can be issued for both normal scan and specific SSID + * scan, depending upon whether an SSID is provided or not. + */ +int mwifiex_request_scan(struct mwifiex_private *priv, u8 wait_option, + struct mwifiex_802_11_ssid *req_ssid) +{ + int ret = 0; + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + + if (down_interruptible(&priv->async_sem)) { + dev_err(priv->adapter->dev, "%s: acquire semaphore\n", + __func__); + return -1; + } + priv->scan_pending_on_block = true; + + /* Allocate wait request buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) { + ret = -1; + goto done; + } + + if (req_ssid && req_ssid->ssid_len != 0) + /* Specific SSID scan */ + status = mwifiex_scan_specific_ssid(priv, wait, + HostCmd_ACT_GEN_SET, + req_ssid, NULL); + else + /* Normal scan */ + status = mwifiex_scan_networks(priv, wait, HostCmd_ACT_GEN_SET, + NULL, NULL); + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + if (status == -1) + ret = -1; +done: + if ((wait) && (status != -EINPROGRESS)) + kfree(wait); + if (ret == -1) { + priv->scan_pending_on_block = false; + up(&priv->async_sem); + } + return ret; +} + +/* + * This function appends the vendor specific IE TLV to a buffer. + */ +int +mwifiex_cmd_append_vsie_tlv(struct mwifiex_private *priv, + u16 vsie_mask, u8 **buffer) +{ + int id, ret_len = 0; + struct mwifiex_ie_types_vendor_param_set *vs_param_set; + + if (!buffer) + return 0; + if (!(*buffer)) + return 0; + + /* + * Traverse through the saved vendor specific IE array and append + * the selected(scan/assoc/adhoc) IE as TLV to the command + */ + for (id = 0; id < MWIFIEX_MAX_VSIE_NUM; id++) { + if (priv->vs_ie[id].mask & vsie_mask) { + vs_param_set = + (struct mwifiex_ie_types_vendor_param_set *) + *buffer; + vs_param_set->header.type = + cpu_to_le16(TLV_TYPE_PASSTHROUGH); + vs_param_set->header.len = + cpu_to_le16((((u16) priv->vs_ie[id].ie[1]) + & 0x00FF) + 2); + memcpy(vs_param_set->ie, priv->vs_ie[id].ie, + le16_to_cpu(vs_param_set->header.len)); + *buffer += le16_to_cpu(vs_param_set->header.len) + + sizeof(struct mwifiex_ie_types_header); + ret_len += le16_to_cpu(vs_param_set->header.len) + + sizeof(struct mwifiex_ie_types_header); + } + } + return ret_len; +} + +/* + * This function saves a beacon buffer of the current BSS descriptor. + * + * The current beacon buffer is saved so that it can be restored in the + * following cases that makes the beacon buffer not to contain the current + * ssid's beacon buffer. + * - The current ssid was not found somehow in the last scan. + * - The current ssid was the last entry of the scan table and overloaded. + */ +void +mwifiex_save_curr_bcn(struct mwifiex_private *priv) +{ + struct mwifiex_bssdescriptor *curr_bss = + &priv->curr_bss_params.bss_descriptor; + + /* save the beacon buffer if it is not saved or updated */ + if ((priv->curr_bcn_buf == NULL) || + (priv->curr_bcn_size != curr_bss->beacon_buf_size) || + (memcmp(priv->curr_bcn_buf, curr_bss->beacon_buf, + curr_bss->beacon_buf_size))) { + + kfree(priv->curr_bcn_buf); + priv->curr_bcn_buf = NULL; + + priv->curr_bcn_size = curr_bss->beacon_buf_size; + if (!priv->curr_bcn_size) + return; + + priv->curr_bcn_buf = kzalloc(curr_bss->beacon_buf_size, + GFP_KERNEL); + if (!priv->curr_bcn_buf) { + dev_err(priv->adapter->dev, + "failed to alloc curr_bcn_buf\n"); + } else { + memcpy(priv->curr_bcn_buf, curr_bss->beacon_buf, + curr_bss->beacon_buf_size); + dev_dbg(priv->adapter->dev, + "info: current beacon saved %d\n", + priv->curr_bcn_size); + } + } +} + +/* + * This function frees the current BSS descriptor beacon buffer. + */ +void +mwifiex_free_curr_bcn(struct mwifiex_private *priv) +{ + kfree(priv->curr_bcn_buf); + priv->curr_bcn_buf = NULL; +} diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c new file mode 100644 index 000000000000..f21e5cd19839 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -0,0 +1,1770 @@ +/* + * Marvell Wireless LAN device driver: SDIO specific handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include <linux/firmware.h> + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" +#include "sdio.h" + + +#define SDIO_VERSION "1.0" + +static struct mwifiex_if_ops sdio_ops; + +static struct semaphore add_remove_card_sem; + +/* + * SDIO probe. + * + * This function probes an mwifiex device and registers it. It allocates + * the card structure, enables SDIO function number and initiates the + * device registration and initialization procedure by adding a logical + * interface. + */ +static int +mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id) +{ + int ret = 0; + struct sdio_mmc_card *card = NULL; + + pr_debug("info: vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n", + func->vendor, func->device, func->class, func->num); + + card = kzalloc(sizeof(struct sdio_mmc_card), GFP_KERNEL); + if (!card) { + pr_err("%s: failed to alloc memory\n", __func__); + return -ENOMEM; + } + + card->func = func; + + func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; + + sdio_claim_host(func); + ret = sdio_enable_func(func); + sdio_release_host(func); + + if (ret) { + pr_err("%s: failed to enable function\n", __func__); + return -EIO; + } + + if (mwifiex_add_card(card, &add_remove_card_sem, &sdio_ops)) { + pr_err("%s: add card failed\n", __func__); + kfree(card); + sdio_claim_host(func); + ret = sdio_disable_func(func); + sdio_release_host(func); + ret = -1; + } + + return ret; +} + +/* + * SDIO remove. + * + * This function removes the interface and frees up the card structure. + */ +static void +mwifiex_sdio_remove(struct sdio_func *func) +{ + struct sdio_mmc_card *card; + + pr_debug("info: SDIO func num=%d\n", func->num); + + if (func) { + card = sdio_get_drvdata(func); + if (card) { + mwifiex_remove_card(card->adapter, + &add_remove_card_sem); + kfree(card); + } + } +} + +/* + * SDIO suspend. + * + * Kernel needs to suspend all functions separately. Therefore all + * registered functions must have drivers with suspend and resume + * methods. Failing that the kernel simply removes the whole card. + * + * If already not suspended, this function allocates and sends a host + * sleep activate request to the firmware and turns off the traffic. + */ +static int mwifiex_sdio_suspend(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct sdio_mmc_card *card; + struct mwifiex_adapter *adapter = NULL; + mmc_pm_flag_t pm_flag = 0; + int hs_actived = 0; + int i; + int ret = 0; + + if (func) { + pm_flag = sdio_get_host_pm_caps(func); + pr_debug("cmd: %s: suspend: PM flag = 0x%x\n", + sdio_func_id(func), pm_flag); + if (!(pm_flag & MMC_PM_KEEP_POWER)) { + pr_err("%s: cannot remain alive while host is" + " suspended\n", sdio_func_id(func)); + return -ENOSYS; + } + + card = sdio_get_drvdata(func); + if (!card || !card->adapter) { + pr_err("suspend: invalid card or adapter\n"); + return 0; + } + } else { + pr_err("suspend: sdio_func is not specified\n"); + return 0; + } + + adapter = card->adapter; + + /* Enable the Host Sleep */ + hs_actived = mwifiex_enable_hs(adapter); + if (hs_actived) { + pr_debug("cmd: suspend with MMC_PM_KEEP_POWER\n"); + ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); + } + + /* Indicate device suspended */ + adapter->is_suspended = true; + + for (i = 0; i < adapter->priv_num; i++) + netif_carrier_off(adapter->priv[i]->netdev); + + return ret; +} + +/* + * SDIO resume. + * + * Kernel needs to suspend all functions separately. Therefore all + * registered functions must have drivers with suspend and resume + * methods. Failing that the kernel simply removes the whole card. + * + * If already not resumed, this function turns on the traffic and + * sends a host sleep cancel request to the firmware. + */ +static int mwifiex_sdio_resume(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct sdio_mmc_card *card; + struct mwifiex_adapter *adapter = NULL; + mmc_pm_flag_t pm_flag = 0; + int i; + + if (func) { + pm_flag = sdio_get_host_pm_caps(func); + card = sdio_get_drvdata(func); + if (!card || !card->adapter) { + pr_err("resume: invalid card or adapter\n"); + return 0; + } + } else { + pr_err("resume: sdio_func is not specified\n"); + return 0; + } + + adapter = card->adapter; + + if (!adapter->is_suspended) { + dev_warn(adapter->dev, "device already resumed\n"); + return 0; + } + + adapter->is_suspended = false; + + for (i = 0; i < adapter->priv_num; i++) + if (adapter->priv[i]->media_connected) + netif_carrier_on(adapter->priv[i]->netdev); + + /* Disable Host Sleep */ + mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA), + MWIFIEX_NO_WAIT); + + return 0; +} + +/* Device ID for SD8787 */ +#define SDIO_DEVICE_ID_MARVELL_8787 (0x9119) + +/* WLAN IDs */ +static const struct sdio_device_id mwifiex_ids[] = { + {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8787)}, + {}, +}; + +MODULE_DEVICE_TABLE(sdio, mwifiex_ids); + +static const struct dev_pm_ops mwifiex_sdio_pm_ops = { + .suspend = mwifiex_sdio_suspend, + .resume = mwifiex_sdio_resume, +}; + +static struct sdio_driver mwifiex_sdio = { + .name = "mwifiex_sdio", + .id_table = mwifiex_ids, + .probe = mwifiex_sdio_probe, + .remove = mwifiex_sdio_remove, + .drv = { + .owner = THIS_MODULE, + .pm = &mwifiex_sdio_pm_ops, + } +}; + +/* + * This function writes data into SDIO card register. + */ +static int +mwifiex_write_reg(struct mwifiex_adapter *adapter, u32 reg, u32 data) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = -1; + + sdio_claim_host(card->func); + sdio_writeb(card->func, (u8) data, reg, &ret); + sdio_release_host(card->func); + + return ret; +} + +/* + * This function reads data from SDIO card register. + */ +static int +mwifiex_read_reg(struct mwifiex_adapter *adapter, u32 reg, u32 *data) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = -1; + u8 val; + + sdio_claim_host(card->func); + val = sdio_readb(card->func, reg, &ret); + sdio_release_host(card->func); + + *data = val; + + return ret; +} + +/* + * This function writes multiple data into SDIO card memory. + * + * This does not work in suspended mode. + */ +static int +mwifiex_write_data_sync(struct mwifiex_adapter *adapter, + u8 *buffer, u32 pkt_len, u32 port, u32 timeout) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = -1; + u8 blk_mode = + (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; + u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; + u32 blk_cnt = + (blk_mode == + BLOCK_MODE) ? (pkt_len / + MWIFIEX_SDIO_BLOCK_SIZE) : pkt_len; + u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); + + if (adapter->is_suspended) { + dev_err(adapter->dev, + "%s: not allowed while suspended\n", __func__); + return -1; + } + + sdio_claim_host(card->func); + + if (!sdio_writesb(card->func, ioport, buffer, blk_cnt * blk_size)) + ret = 0; + + sdio_release_host(card->func); + + return ret; +} + +/* + * This function reads multiple data from SDIO card memory. + */ +static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, + u8 *buffer, u32 len, + u32 port, u32 timeout, u8 claim) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = -1; + u8 blk_mode = + (port & MWIFIEX_SDIO_BYTE_MODE_MASK) ? BYTE_MODE : BLOCK_MODE; + u32 blk_size = (blk_mode == BLOCK_MODE) ? MWIFIEX_SDIO_BLOCK_SIZE : 1; + u32 blk_cnt = + (blk_mode == + BLOCK_MODE) ? (len / MWIFIEX_SDIO_BLOCK_SIZE) : len; + u32 ioport = (port & MWIFIEX_SDIO_IO_PORT_MASK); + + if (claim) + sdio_claim_host(card->func); + + if (!sdio_readsb(card->func, buffer, ioport, blk_cnt * blk_size)) + ret = 0; + + if (claim) + sdio_release_host(card->func); + + return ret; +} + +/* + * This function wakes up the card. + * + * A host power up command is written to the card configuration + * register to wake up the card. + */ +static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) +{ + int ret; + + dev_dbg(adapter->dev, "event: wakeup device...\n"); + ret = mwifiex_write_reg(adapter, CONFIGURATION_REG, HOST_POWER_UP); + + return ret; +} + +/* + * This function is called after the card has woken up. + * + * The card configuration register is reset. + */ +static int mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) +{ + int ret; + + dev_dbg(adapter->dev, "cmd: wakeup device completed\n"); + ret = mwifiex_write_reg(adapter, CONFIGURATION_REG, 0); + + return ret; +} + +/* + * This function initializes the IO ports. + * + * The following operations are performed - + * - Read the IO ports (0, 1 and 2) + * - Set host interrupt Reset-To-Read to clear + * - Set auto re-enable interrupt + */ +static int mwifiex_init_sdio_ioport(struct mwifiex_adapter *adapter) +{ + u32 reg; + + adapter->ioport = 0; + + /* Read the IO port */ + if (!mwifiex_read_reg(adapter, IO_PORT_0_REG, ®)) + adapter->ioport |= (reg & 0xff); + else + return -1; + + if (!mwifiex_read_reg(adapter, IO_PORT_1_REG, ®)) + adapter->ioport |= ((reg & 0xff) << 8); + else + return -1; + + if (!mwifiex_read_reg(adapter, IO_PORT_2_REG, ®)) + adapter->ioport |= ((reg & 0xff) << 16); + else + return -1; + + pr_debug("info: SDIO FUNC1 IO port: %#x\n", adapter->ioport); + + /* Set Host interrupt reset to read to clear */ + if (!mwifiex_read_reg(adapter, HOST_INT_RSR_REG, ®)) + mwifiex_write_reg(adapter, HOST_INT_RSR_REG, + reg | SDIO_INT_MASK); + else + return -1; + + /* Dnld/Upld ready set to auto reset */ + if (!mwifiex_read_reg(adapter, CARD_MISC_CFG_REG, ®)) + mwifiex_write_reg(adapter, CARD_MISC_CFG_REG, + reg | AUTO_RE_ENABLE_INT); + else + return -1; + + return 0; +} + +/* + * This function sends data to the card. + */ +static int mwifiex_write_data_to_card(struct mwifiex_adapter *adapter, + u8 *payload, u32 pkt_len, u32 port) +{ + u32 i = 0; + int ret = 0; + + do { + ret = mwifiex_write_data_sync(adapter, payload, pkt_len, + port, 0); + if (ret) { + i++; + dev_err(adapter->dev, "host_to_card, write iomem" + " (%d) failed: %d\n", i, ret); + if (mwifiex_write_reg(adapter, + CONFIGURATION_REG, 0x04)) + dev_err(adapter->dev, "write CFG reg failed\n"); + + ret = -1; + if (i > MAX_WRITE_IOMEM_RETRY) + return ret; + } + } while (ret == -1); + + return ret; +} + +/* + * This function gets the read port. + * + * If control port bit is set in MP read bitmap, the control port + * is returned, otherwise the current read port is returned and + * the value is increased (provided it does not reach the maximum + * limit, in which case it is reset to 1) + */ +static int mwifiex_get_rd_port(struct mwifiex_adapter *adapter, u8 *port) +{ + struct sdio_mmc_card *card = adapter->card; + u16 rd_bitmap = card->mp_rd_bitmap; + + dev_dbg(adapter->dev, "data: mp_rd_bitmap=0x%04x\n", rd_bitmap); + + if (!(rd_bitmap & (CTRL_PORT_MASK | DATA_PORT_MASK))) + return -1; + + if (card->mp_rd_bitmap & CTRL_PORT_MASK) { + card->mp_rd_bitmap &= (u16) (~CTRL_PORT_MASK); + *port = CTRL_PORT; + dev_dbg(adapter->dev, "data: port=%d mp_rd_bitmap=0x%04x\n", + *port, card->mp_rd_bitmap); + } else { + if (card->mp_rd_bitmap & (1 << card->curr_rd_port)) { + card->mp_rd_bitmap &= + (u16) (~(1 << card->curr_rd_port)); + *port = card->curr_rd_port; + + if (++card->curr_rd_port == MAX_PORT) + card->curr_rd_port = 1; + } else { + return -1; + } + + dev_dbg(adapter->dev, + "data: port=%d mp_rd_bitmap=0x%04x -> 0x%04x\n", + *port, rd_bitmap, card->mp_rd_bitmap); + } + return 0; +} + +/* + * This function gets the write port for data. + * + * The current write port is returned if available and the value is + * increased (provided it does not reach the maximum limit, in which + * case it is reset to 1) + */ +static int mwifiex_get_wr_port_data(struct mwifiex_adapter *adapter, u8 *port) +{ + struct sdio_mmc_card *card = adapter->card; + u16 wr_bitmap = card->mp_wr_bitmap; + + dev_dbg(adapter->dev, "data: mp_wr_bitmap=0x%04x\n", wr_bitmap); + + if (!(wr_bitmap & card->mp_data_port_mask)) + return -1; + + if (card->mp_wr_bitmap & (1 << card->curr_wr_port)) { + card->mp_wr_bitmap &= (u16) (~(1 << card->curr_wr_port)); + *port = card->curr_wr_port; + if (++card->curr_wr_port == card->mp_end_port) + card->curr_wr_port = 1; + } else { + adapter->data_sent = true; + return -EBUSY; + } + + if (*port == CTRL_PORT) { + dev_err(adapter->dev, "invalid data port=%d cur port=%d" + " mp_wr_bitmap=0x%04x -> 0x%04x\n", + *port, card->curr_wr_port, wr_bitmap, + card->mp_wr_bitmap); + return -1; + } + + dev_dbg(adapter->dev, "data: port=%d mp_wr_bitmap=0x%04x -> 0x%04x\n", + *port, wr_bitmap, card->mp_wr_bitmap); + + return 0; +} + +/* + * This function polls the card status. + */ +static int +mwifiex_sdio_poll_card_status(struct mwifiex_adapter *adapter, u8 bits) +{ + u32 tries; + u32 cs = 0; + + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + if (mwifiex_read_reg(adapter, CARD_STATUS_REG, &cs)) + break; + else if ((cs & bits) == bits) + return 0; + + udelay(10); + } + + dev_err(adapter->dev, "poll card status failed, tries = %d\n", + tries); + return -1; +} + +/* + * This function reads the firmware status. + */ +static int +mwifiex_sdio_read_fw_status(struct mwifiex_adapter *adapter, u16 *dat) +{ + u32 fws0 = 0, fws1 = 0; + + if (mwifiex_read_reg(adapter, CARD_FW_STATUS0_REG, &fws0)) + return -1; + + if (mwifiex_read_reg(adapter, CARD_FW_STATUS1_REG, &fws1)) + return -1; + + *dat = (u16) ((fws1 << 8) | fws0); + + return 0; +} + +/* + * This function disables the host interrupt. + * + * The host interrupt mask is read, the disable bit is reset and + * written back to the card host interrupt mask register. + */ +static int mwifiex_sdio_disable_host_int(struct mwifiex_adapter *adapter) +{ + u32 host_int_mask = 0; + + /* Read back the host_int_mask register */ + if (mwifiex_read_reg(adapter, HOST_INT_MASK_REG, &host_int_mask)) + return -1; + + /* Update with the mask and write back to the register */ + host_int_mask &= ~HOST_INT_DISABLE; + + if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, host_int_mask)) { + dev_err(adapter->dev, "disable host interrupt failed\n"); + return -1; + } + + return 0; +} + +/* + * This function enables the host interrupt. + * + * The host interrupt enable mask is written to the card + * host interrupt mask register. + */ +static int mwifiex_sdio_enable_host_int(struct mwifiex_adapter *adapter) +{ + /* Simply write the mask to the register */ + if (mwifiex_write_reg(adapter, HOST_INT_MASK_REG, HOST_INT_ENABLE)) { + dev_err(adapter->dev, "enable host interrupt failed\n"); + return -1; + } + return 0; +} + +/* + * This function sends a data buffer to the card. + */ +static int mwifiex_sdio_card_to_host(struct mwifiex_adapter *adapter, + u32 *type, u8 *buffer, + u32 npayload, u32 ioport) +{ + int ret = 0; + u32 nb; + + if (!buffer) { + dev_err(adapter->dev, "%s: buffer is NULL\n", __func__); + return -1; + } + + ret = mwifiex_read_data_sync(adapter, buffer, npayload, ioport, 0, 1); + + if (ret) { + dev_err(adapter->dev, "%s: read iomem failed: %d\n", __func__, + ret); + return -1; + } + + nb = le16_to_cpu(*(__le16 *) (buffer)); + if (nb > npayload) { + dev_err(adapter->dev, "%s: invalid packet, nb=%d, npayload=%d\n", + __func__, nb, npayload); + return -1; + } + + *type = le16_to_cpu(*(__le16 *) (buffer + 2)); + + return ret; +} + +/* + * This function downloads the firmware to the card. + * + * Firmware is downloaded to the card in blocks. Every block download + * is tested for CRC errors, and retried a number of times before + * returning failure. + */ +static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, + struct mwifiex_fw_image *fw) +{ + int ret = 0; + u8 *firmware = fw->fw_buf; + u32 firmware_len = fw->fw_len; + u32 offset = 0; + u32 base0, base1; + u8 *fwbuf; + u16 len = 0; + u32 txlen = 0, tx_blocks = 0, tries = 0; + u32 i = 0; + + if (!firmware_len) { + dev_err(adapter->dev, "firmware image not found!" + " Terminating download\n"); + return -1; + } + + dev_dbg(adapter->dev, "info: downloading FW image (%d bytes)\n", + firmware_len); + + /* Assume that the allocated buffer is 8-byte aligned */ + fwbuf = kzalloc(MWIFIEX_UPLD_SIZE, GFP_KERNEL); + if (!fwbuf) { + dev_err(adapter->dev, "unable to alloc buffer for firmware." + " Terminating download\n"); + return -1; + } + + /* Perform firmware data transfer */ + do { + /* The host polls for the DN_LD_CARD_RDY and CARD_IO_READY + bits */ + ret = mwifiex_sdio_poll_card_status(adapter, CARD_IO_READY | + DN_LD_CARD_RDY); + if (ret) { + dev_err(adapter->dev, "FW download with helper:" + " poll status timeout @ %d\n", offset); + goto done; + } + + /* More data? */ + if (offset >= firmware_len) + break; + + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { + ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_0, + &base0); + if (ret) { + dev_err(adapter->dev, "dev BASE0 register read" + " failed: base0=0x%04X(%d). Terminating " + "download\n", base0, base0); + goto done; + } + ret = mwifiex_read_reg(adapter, HOST_F1_RD_BASE_1, + &base1); + if (ret) { + dev_err(adapter->dev, "dev BASE1 register read" + " failed: base1=0x%04X(%d). Terminating " + "download\n", base1, base1); + goto done; + } + len = (u16) (((base1 & 0xff) << 8) | (base0 & 0xff)); + + if (len) + break; + + udelay(10); + } + + if (!len) { + break; + } else if (len > MWIFIEX_UPLD_SIZE) { + dev_err(adapter->dev, "FW download failed @ %d," + " invalid length %d\n", offset, len); + ret = -1; + goto done; + } + + txlen = len; + + if (len & BIT(0)) { + i++; + if (i > MAX_WRITE_IOMEM_RETRY) { + dev_err(adapter->dev, "FW download failed @" + " %d, over max retry count\n", offset); + ret = -1; + goto done; + } + dev_err(adapter->dev, "CRC indicated by the helper:" + " len = 0x%04X, txlen = %d\n", len, txlen); + len &= ~BIT(0); + /* Setting this to 0 to resend from same offset */ + txlen = 0; + } else { + i = 0; + + /* Set blocksize to transfer - checking for last + block */ + if (firmware_len - offset < txlen) + txlen = firmware_len - offset; + + tx_blocks = (txlen + MWIFIEX_SDIO_BLOCK_SIZE - + 1) / MWIFIEX_SDIO_BLOCK_SIZE; + + /* Copy payload to buffer */ + memmove(fwbuf, &firmware[offset], txlen); + } + + ret = mwifiex_write_data_sync(adapter, fwbuf, tx_blocks * + MWIFIEX_SDIO_BLOCK_SIZE, + adapter->ioport, 0); + if (ret) { + dev_err(adapter->dev, "FW download, write iomem (%d)" + " failed @ %d\n", i, offset); + if (mwifiex_write_reg(adapter, CONFIGURATION_REG, 0x04)) + dev_err(adapter->dev, "write CFG reg failed\n"); + + ret = -1; + goto done; + } + + offset += txlen; + } while (true); + + dev_dbg(adapter->dev, "info: FW download over, size %d bytes\n", + offset); + + ret = 0; +done: + kfree(fwbuf); + return ret; +} + +/* + * This function checks the firmware status in card. + * + * The winner interface is also determined by this function. + */ +static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter, + u32 poll_num, int *winner) +{ + int ret = 0; + u16 firmware_stat; + u32 tries; + u32 winner_status; + + /* Wait for firmware initialization event */ + for (tries = 0; tries < poll_num; tries++) { + ret = mwifiex_sdio_read_fw_status(adapter, &firmware_stat); + if (ret) + continue; + if (firmware_stat == FIRMWARE_READY) { + ret = 0; + break; + } else { + mdelay(100); + ret = -1; + } + } + + if (winner && ret) { + if (mwifiex_read_reg + (adapter, CARD_FW_STATUS0_REG, &winner_status)) + winner_status = 0; + + if (winner_status) + *winner = 0; + else + *winner = 1; + } + return ret; +} + +/* + * This function reads the interrupt status from card. + */ +static void mwifiex_interrupt_status(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + u32 sdio_ireg = 0; + unsigned long flags; + + if (mwifiex_read_data_sync(adapter, card->mp_regs, MAX_MP_REGS, + REG_PORT | MWIFIEX_SDIO_BYTE_MODE_MASK, 0, + 0)) { + dev_err(adapter->dev, "read mp_regs failed\n"); + return; + } + + sdio_ireg = card->mp_regs[HOST_INTSTATUS_REG]; + if (sdio_ireg) { + /* + * DN_LD_HOST_INT_STATUS and/or UP_LD_HOST_INT_STATUS + * Clear the interrupt status register + */ + dev_dbg(adapter->dev, "int: sdio_ireg = %#x\n", sdio_ireg); + spin_lock_irqsave(&adapter->int_lock, flags); + adapter->int_status |= sdio_ireg; + spin_unlock_irqrestore(&adapter->int_lock, flags); + } + + return; +} + +/* + * SDIO interrupt handler. + * + * This function reads the interrupt status from firmware and assigns + * the main process in workqueue which will handle the interrupt. + */ +static void +mwifiex_sdio_interrupt(struct sdio_func *func) +{ + struct mwifiex_adapter *adapter; + struct sdio_mmc_card *card; + + card = sdio_get_drvdata(func); + if (!card || !card->adapter) { + pr_debug("int: func=%p card=%p adapter=%p\n", + func, card, card ? card->adapter : NULL); + return; + } + adapter = card->adapter; + + if (adapter->surprise_removed) + return; + + if (!adapter->pps_uapsd_mode && adapter->ps_state == PS_STATE_SLEEP) + adapter->ps_state = PS_STATE_AWAKE; + + mwifiex_interrupt_status(adapter); + queue_work(adapter->workqueue, &adapter->main_work); + + return; +} + +/* + * This function decodes a received packet. + * + * Based on the type, the packet is treated as either a data, or + * a command response, or an event, and the correct handler + * function is invoked. + */ +static int mwifiex_decode_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb, u32 upld_typ) +{ + u8 *cmd_buf; + + skb_pull(skb, INTF_HEADER_LEN); + + switch (upld_typ) { + case MWIFIEX_TYPE_DATA: + dev_dbg(adapter->dev, "info: --- Rx: Data packet ---\n"); + mwifiex_handle_rx_packet(adapter, skb); + break; + + case MWIFIEX_TYPE_CMD: + dev_dbg(adapter->dev, "info: --- Rx: Cmd Response ---\n"); + /* take care of curr_cmd = NULL case */ + if (!adapter->curr_cmd) { + cmd_buf = adapter->upld_buf; + + if (adapter->ps_state == PS_STATE_SLEEP_CFM) + mwifiex_process_sleep_confirm_resp(adapter, + skb->data, skb->len); + + memcpy(cmd_buf, skb->data, min_t(u32, + MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); + + dev_kfree_skb_any(skb); + } else { + adapter->cmd_resp_received = true; + adapter->curr_cmd->resp_skb = skb; + } + break; + + case MWIFIEX_TYPE_EVENT: + dev_dbg(adapter->dev, "info: --- Rx: Event ---\n"); + adapter->event_cause = *(u32 *) skb->data; + + skb_pull(skb, MWIFIEX_EVENT_HEADER_LEN); + + if ((skb->len > 0) && (skb->len < MAX_EVENT_SIZE)) + memcpy(adapter->event_body, skb->data, skb->len); + + /* event cause has been saved to adapter->event_cause */ + adapter->event_received = true; + adapter->event_skb = skb; + + break; + + default: + dev_err(adapter->dev, "unknown upload type %#x\n", upld_typ); + dev_kfree_skb_any(skb); + break; + } + + return 0; +} + +/* + * This function transfers received packets from card to driver, performing + * aggregation if required. + * + * For data received on control port, or if aggregation is disabled, the + * received buffers are uploaded as separate packets. However, if aggregation + * is enabled and required, the buffers are copied onto an aggregation buffer, + * provided there is space left, processed and finally uploaded. + */ +static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter, + struct sk_buff *skb, u8 port) +{ + struct sdio_mmc_card *card = adapter->card; + s32 f_do_rx_aggr = 0; + s32 f_do_rx_cur = 0; + s32 f_aggr_cur = 0; + struct sk_buff *skb_deaggr; + u32 pind = 0; + u32 pkt_len, pkt_type = 0; + u8 *curr_ptr; + u32 rx_len = skb->len; + + if (port == CTRL_PORT) { + /* Read the command Resp without aggr */ + dev_dbg(adapter->dev, "info: %s: no aggregation for cmd " + "response\n", __func__); + + f_do_rx_cur = 1; + goto rx_curr_single; + } + + if (!card->mpa_rx.enabled) { + dev_dbg(adapter->dev, "info: %s: rx aggregation disabled\n", + __func__); + + f_do_rx_cur = 1; + goto rx_curr_single; + } + + if (card->mp_rd_bitmap & (~((u16) CTRL_PORT_MASK))) { + /* Some more data RX pending */ + dev_dbg(adapter->dev, "info: %s: not last packet\n", __func__); + + if (MP_RX_AGGR_IN_PROGRESS(card)) { + if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len)) { + f_aggr_cur = 1; + } else { + /* No room in Aggr buf, do rx aggr now */ + f_do_rx_aggr = 1; + f_do_rx_cur = 1; + } + } else { + /* Rx aggr not in progress */ + f_aggr_cur = 1; + } + + } else { + /* No more data RX pending */ + dev_dbg(adapter->dev, "info: %s: last packet\n", __func__); + + if (MP_RX_AGGR_IN_PROGRESS(card)) { + f_do_rx_aggr = 1; + if (MP_RX_AGGR_BUF_HAS_ROOM(card, skb->len)) + f_aggr_cur = 1; + else + /* No room in Aggr buf, do rx aggr now */ + f_do_rx_cur = 1; + } else { + f_do_rx_cur = 1; + } + } + + if (f_aggr_cur) { + dev_dbg(adapter->dev, "info: current packet aggregation\n"); + /* Curr pkt can be aggregated */ + MP_RX_AGGR_SETUP(card, skb, port); + + if (MP_RX_AGGR_PKT_LIMIT_REACHED(card) || + MP_RX_AGGR_PORT_LIMIT_REACHED(card)) { + dev_dbg(adapter->dev, "info: %s: aggregated packet " + "limit reached\n", __func__); + /* No more pkts allowed in Aggr buf, rx it */ + f_do_rx_aggr = 1; + } + } + + if (f_do_rx_aggr) { + /* do aggr RX now */ + dev_dbg(adapter->dev, "info: do_rx_aggr: num of packets: %d\n", + card->mpa_rx.pkt_cnt); + + if (mwifiex_read_data_sync(adapter, card->mpa_rx.buf, + card->mpa_rx.buf_len, + (adapter->ioport | 0x1000 | + (card->mpa_rx.ports << 4)) + + card->mpa_rx.start_port, 0, 1)) + return -1; + + curr_ptr = card->mpa_rx.buf; + + for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) { + + /* get curr PKT len & type */ + pkt_len = *(u16 *) &curr_ptr[0]; + pkt_type = *(u16 *) &curr_ptr[2]; + + /* copy pkt to deaggr buf */ + skb_deaggr = card->mpa_rx.skb_arr[pind]; + + if ((pkt_type == MWIFIEX_TYPE_DATA) && (pkt_len <= + card->mpa_rx.len_arr[pind])) { + + memcpy(skb_deaggr->data, curr_ptr, pkt_len); + + skb_trim(skb_deaggr, pkt_len); + + /* Process de-aggr packet */ + mwifiex_decode_rx_packet(adapter, skb_deaggr, + pkt_type); + } else { + dev_err(adapter->dev, "wrong aggr pkt:" + " type=%d len=%d max_len=%d\n", + pkt_type, pkt_len, + card->mpa_rx.len_arr[pind]); + dev_kfree_skb_any(skb_deaggr); + } + curr_ptr += card->mpa_rx.len_arr[pind]; + } + MP_RX_AGGR_BUF_RESET(card); + } + +rx_curr_single: + if (f_do_rx_cur) { + dev_dbg(adapter->dev, "info: RX: port: %d, rx_len: %d\n", + port, rx_len); + + if (mwifiex_sdio_card_to_host(adapter, &pkt_type, + skb->data, skb->len, + adapter->ioport + port)) + return -1; + + mwifiex_decode_rx_packet(adapter, skb, pkt_type); + } + + return 0; +} + +/* + * This function checks the current interrupt status. + * + * The following interrupts are checked and handled by this function - + * - Data sent + * - Command sent + * - Packets received + * + * Since the firmware does not generate download ready interrupt if the + * port updated is command port only, command sent interrupt checking + * should be done manually, and for every SDIO interrupt. + * + * In case of Rx packets received, the packets are uploaded from card to + * host and processed accordingly. + */ +static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = 0; + u8 sdio_ireg; + struct sk_buff *skb = NULL; + u8 port = CTRL_PORT; + u32 len_reg_l, len_reg_u; + u32 rx_blocks; + u16 rx_len; + unsigned long flags; + + spin_lock_irqsave(&adapter->int_lock, flags); + sdio_ireg = adapter->int_status; + adapter->int_status = 0; + spin_unlock_irqrestore(&adapter->int_lock, flags); + + if (!sdio_ireg) + return ret; + + if (sdio_ireg & DN_LD_HOST_INT_STATUS) { + card->mp_wr_bitmap = ((u16) card->mp_regs[WR_BITMAP_U]) << 8; + card->mp_wr_bitmap |= (u16) card->mp_regs[WR_BITMAP_L]; + dev_dbg(adapter->dev, "int: DNLD: wr_bitmap=0x%04x\n", + card->mp_wr_bitmap); + if (adapter->data_sent && + (card->mp_wr_bitmap & card->mp_data_port_mask)) { + dev_dbg(adapter->dev, + "info: <--- Tx DONE Interrupt --->\n"); + adapter->data_sent = false; + } + } + + /* As firmware will not generate download ready interrupt if the port + updated is command port only, cmd_sent should be done for any SDIO + interrupt. */ + if (adapter->cmd_sent) { + /* Check if firmware has attach buffer at command port and + update just that in wr_bit_map. */ + card->mp_wr_bitmap |= + (u16) card->mp_regs[WR_BITMAP_L] & CTRL_PORT_MASK; + if (card->mp_wr_bitmap & CTRL_PORT_MASK) + adapter->cmd_sent = false; + } + + dev_dbg(adapter->dev, "info: cmd_sent=%d data_sent=%d\n", + adapter->cmd_sent, adapter->data_sent); + if (sdio_ireg & UP_LD_HOST_INT_STATUS) { + card->mp_rd_bitmap = ((u16) card->mp_regs[RD_BITMAP_U]) << 8; + card->mp_rd_bitmap |= (u16) card->mp_regs[RD_BITMAP_L]; + dev_dbg(adapter->dev, "int: UPLD: rd_bitmap=0x%04x\n", + card->mp_rd_bitmap); + + while (true) { + ret = mwifiex_get_rd_port(adapter, &port); + if (ret) { + dev_dbg(adapter->dev, + "info: no more rd_port available\n"); + break; + } + len_reg_l = RD_LEN_P0_L + (port << 1); + len_reg_u = RD_LEN_P0_U + (port << 1); + rx_len = ((u16) card->mp_regs[len_reg_u]) << 8; + rx_len |= (u16) card->mp_regs[len_reg_l]; + dev_dbg(adapter->dev, "info: RX: port=%d rx_len=%u\n", + port, rx_len); + rx_blocks = + (rx_len + MWIFIEX_SDIO_BLOCK_SIZE - + 1) / MWIFIEX_SDIO_BLOCK_SIZE; + if (rx_len <= INTF_HEADER_LEN + || (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE) > + MWIFIEX_RX_DATA_BUF_SIZE) { + dev_err(adapter->dev, "invalid rx_len=%d\n", + rx_len); + return -1; + } + rx_len = (u16) (rx_blocks * MWIFIEX_SDIO_BLOCK_SIZE); + + skb = dev_alloc_skb(rx_len); + + if (!skb) { + dev_err(adapter->dev, "%s: failed to alloc skb", + __func__); + return -1; + } + + skb_put(skb, rx_len); + + dev_dbg(adapter->dev, "info: rx_len = %d skb->len = %d\n", + rx_len, skb->len); + + if (mwifiex_sdio_card_to_host_mp_aggr(adapter, skb, + port)) { + u32 cr = 0; + + dev_err(adapter->dev, "card_to_host_mpa failed:" + " int status=%#x\n", sdio_ireg); + if (mwifiex_read_reg(adapter, + CONFIGURATION_REG, &cr)) + dev_err(adapter->dev, + "read CFG reg failed\n"); + + dev_dbg(adapter->dev, + "info: CFG reg val = %d\n", cr); + if (mwifiex_write_reg(adapter, + CONFIGURATION_REG, + (cr | 0x04))) + dev_err(adapter->dev, + "write CFG reg failed\n"); + + dev_dbg(adapter->dev, "info: write success\n"); + if (mwifiex_read_reg(adapter, + CONFIGURATION_REG, &cr)) + dev_err(adapter->dev, + "read CFG reg failed\n"); + + dev_dbg(adapter->dev, + "info: CFG reg val =%x\n", cr); + dev_kfree_skb_any(skb); + return -1; + } + } + } + + return 0; +} + +/* + * This function aggregates transmission buffers in driver and downloads + * the aggregated packet to card. + * + * The individual packets are aggregated by copying into an aggregation + * buffer and then downloaded to the card. Previous unsent packets in the + * aggregation buffer are pre-copied first before new packets are added. + * Aggregation is done till there is space left in the aggregation buffer, + * or till new packets are available. + * + * The function will only download the packet to the card when aggregation + * stops, otherwise it will just aggregate the packet in aggregation buffer + * and return. + */ +static int mwifiex_host_to_card_mp_aggr(struct mwifiex_adapter *adapter, + u8 *payload, u32 pkt_len, u8 port, + u32 next_pkt_len) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = 0; + s32 f_send_aggr_buf = 0; + s32 f_send_cur_buf = 0; + s32 f_precopy_cur_buf = 0; + s32 f_postcopy_cur_buf = 0; + + if ((!card->mpa_tx.enabled) || (port == CTRL_PORT)) { + dev_dbg(adapter->dev, "info: %s: tx aggregation disabled\n", + __func__); + + f_send_cur_buf = 1; + goto tx_curr_single; + } + + if (next_pkt_len) { + /* More pkt in TX queue */ + dev_dbg(adapter->dev, "info: %s: more packets in queue.\n", + __func__); + + if (MP_TX_AGGR_IN_PROGRESS(card)) { + if (!MP_TX_AGGR_PORT_LIMIT_REACHED(card) && + MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) { + f_precopy_cur_buf = 1; + + if (!(card->mp_wr_bitmap & + (1 << card->curr_wr_port)) + || !MP_TX_AGGR_BUF_HAS_ROOM( + card, next_pkt_len)) + f_send_aggr_buf = 1; + } else { + /* No room in Aggr buf, send it */ + f_send_aggr_buf = 1; + + if (MP_TX_AGGR_PORT_LIMIT_REACHED(card) || + !(card->mp_wr_bitmap & + (1 << card->curr_wr_port))) + f_send_cur_buf = 1; + else + f_postcopy_cur_buf = 1; + } + } else { + if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len) + && (card->mp_wr_bitmap & (1 << card->curr_wr_port))) + f_precopy_cur_buf = 1; + else + f_send_cur_buf = 1; + } + } else { + /* Last pkt in TX queue */ + dev_dbg(adapter->dev, "info: %s: Last packet in Tx Queue.\n", + __func__); + + if (MP_TX_AGGR_IN_PROGRESS(card)) { + /* some packs in Aggr buf already */ + f_send_aggr_buf = 1; + + if (MP_TX_AGGR_BUF_HAS_ROOM(card, pkt_len)) + f_precopy_cur_buf = 1; + else + /* No room in Aggr buf, send it */ + f_send_cur_buf = 1; + } else { + f_send_cur_buf = 1; + } + } + + if (f_precopy_cur_buf) { + dev_dbg(adapter->dev, "data: %s: precopy current buffer\n", + __func__); + MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port); + + if (MP_TX_AGGR_PKT_LIMIT_REACHED(card) || + MP_TX_AGGR_PORT_LIMIT_REACHED(card)) + /* No more pkts allowed in Aggr buf, send it */ + f_send_aggr_buf = 1; + } + + if (f_send_aggr_buf) { + dev_dbg(adapter->dev, "data: %s: send aggr buffer: %d %d\n", + __func__, + card->mpa_tx.start_port, card->mpa_tx.ports); + ret = mwifiex_write_data_to_card(adapter, card->mpa_tx.buf, + card->mpa_tx.buf_len, + (adapter->ioport | 0x1000 | + (card->mpa_tx.ports << 4)) + + card->mpa_tx.start_port); + + MP_TX_AGGR_BUF_RESET(card); + } + +tx_curr_single: + if (f_send_cur_buf) { + dev_dbg(adapter->dev, "data: %s: send current buffer %d\n", + __func__, port); + ret = mwifiex_write_data_to_card(adapter, payload, pkt_len, + adapter->ioport + port); + } + + if (f_postcopy_cur_buf) { + dev_dbg(adapter->dev, "data: %s: postcopy current buffer\n", + __func__); + MP_TX_AGGR_BUF_PUT(card, payload, pkt_len, port); + } + + return ret; +} + +/* + * This function downloads data from driver to card. + * + * Both commands and data packets are transferred to the card by this + * function. + * + * This function adds the SDIO specific header to the front of the buffer + * before transferring. The header contains the length of the packet and + * the type. The firmware handles the packets based upon this set type. + */ +static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter, + u8 type, u8 *payload, u32 pkt_len, + struct mwifiex_tx_param *tx_param) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = 0; + u32 buf_block_len; + u32 blk_size; + u8 port = CTRL_PORT; + + /* Allocate buffer and copy payload */ + blk_size = MWIFIEX_SDIO_BLOCK_SIZE; + buf_block_len = (pkt_len + blk_size - 1) / blk_size; + *(u16 *) &payload[0] = (u16) pkt_len; + *(u16 *) &payload[2] = type; + + /* + * This is SDIO specific header + * u16 length, + * u16 type (MWIFIEX_TYPE_DATA = 0, MWIFIEX_TYPE_CMD = 1, + * MWIFIEX_TYPE_EVENT = 3) + */ + if (type == MWIFIEX_TYPE_DATA) { + ret = mwifiex_get_wr_port_data(adapter, &port); + if (ret) { + dev_err(adapter->dev, "%s: no wr_port available\n", + __func__); + return ret; + } + } else { + adapter->cmd_sent = true; + /* Type must be MWIFIEX_TYPE_CMD */ + + if (pkt_len <= INTF_HEADER_LEN || + pkt_len > MWIFIEX_UPLD_SIZE) + dev_err(adapter->dev, "%s: payload=%p, nb=%d\n", + __func__, payload, pkt_len); + } + + /* Transfer data to card */ + pkt_len = buf_block_len * blk_size; + + if (tx_param) + ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len, + port, tx_param->next_pkt_len); + else + ret = mwifiex_host_to_card_mp_aggr(adapter, payload, pkt_len, + port, 0); + + if (ret) { + if (type == MWIFIEX_TYPE_CMD) + adapter->cmd_sent = false; + if (type == MWIFIEX_TYPE_DATA) + adapter->data_sent = false; + } else { + if (type == MWIFIEX_TYPE_DATA) { + if (!(card->mp_wr_bitmap & (1 << card->curr_wr_port))) + adapter->data_sent = true; + else + adapter->data_sent = false; + } + } + + return ret; +} + +/* + * This function allocates the MPA Tx and Rx buffers. + */ +static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter, + u32 mpa_tx_buf_size, u32 mpa_rx_buf_size) +{ + struct sdio_mmc_card *card = adapter->card; + int ret = 0; + + card->mpa_tx.buf = kzalloc(mpa_tx_buf_size, GFP_KERNEL); + if (!card->mpa_tx.buf) { + dev_err(adapter->dev, "could not alloc buffer for MP-A TX\n"); + ret = -1; + goto error; + } + + card->mpa_tx.buf_size = mpa_tx_buf_size; + + card->mpa_rx.buf = kzalloc(mpa_rx_buf_size, GFP_KERNEL); + if (!card->mpa_rx.buf) { + dev_err(adapter->dev, "could not alloc buffer for MP-A RX\n"); + ret = -1; + goto error; + } + + card->mpa_rx.buf_size = mpa_rx_buf_size; + +error: + if (ret) { + kfree(card->mpa_tx.buf); + kfree(card->mpa_rx.buf); + } + + return ret; +} + +/* + * This function unregisters the SDIO device. + * + * The SDIO IRQ is released, the function is disabled and driver + * data is set to null. + */ +static void +mwifiex_unregister_dev(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + if (adapter->card) { + /* Release the SDIO IRQ */ + sdio_claim_host(card->func); + sdio_release_irq(card->func); + sdio_disable_func(card->func); + sdio_release_host(card->func); + sdio_set_drvdata(card->func, NULL); + } +} + +/* + * This function registers the SDIO device. + * + * SDIO IRQ is claimed, block size is set and driver data is initialized. + */ +static int mwifiex_register_dev(struct mwifiex_adapter *adapter) +{ + int ret = 0; + struct sdio_mmc_card *card = adapter->card; + struct sdio_func *func = card->func; + + /* save adapter pointer in card */ + card->adapter = adapter; + + sdio_claim_host(func); + + /* Request the SDIO IRQ */ + ret = sdio_claim_irq(func, mwifiex_sdio_interrupt); + if (ret) { + pr_err("claim irq failed: ret=%d\n", ret); + goto disable_func; + } + + /* Set block size */ + ret = sdio_set_block_size(card->func, MWIFIEX_SDIO_BLOCK_SIZE); + if (ret) { + pr_err("cannot set SDIO block size\n"); + ret = -1; + goto release_irq; + } + + sdio_release_host(func); + sdio_set_drvdata(func, card); + + adapter->dev = &func->dev; + + return 0; + +release_irq: + sdio_release_irq(func); +disable_func: + sdio_disable_func(func); + sdio_release_host(func); + adapter->card = NULL; + + return -1; +} + +/* + * This function initializes the SDIO driver. + * + * The following initializations steps are followed - + * - Read the Host interrupt status register to acknowledge + * the first interrupt got from bootloader + * - Disable host interrupt mask register + * - Get SDIO port + * - Get revision ID + * - Initialize SDIO variables in card + * - Allocate MP registers + * - Allocate MPA Tx and Rx buffers + */ +static int mwifiex_init_sdio(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + int ret; + u32 sdio_ireg = 0; + + /* + * Read the HOST_INT_STATUS_REG for ACK the first interrupt got + * from the bootloader. If we don't do this we get a interrupt + * as soon as we register the irq. + */ + mwifiex_read_reg(adapter, HOST_INTSTATUS_REG, &sdio_ireg); + + /* Disable host interrupt mask register for SDIO */ + mwifiex_sdio_disable_host_int(adapter); + + /* Get SDIO ioport */ + mwifiex_init_sdio_ioport(adapter); + + /* Get revision ID */ +#define REV_ID_REG 0x5c + mwifiex_read_reg(adapter, REV_ID_REG, &adapter->revision_id); + + /* Initialize SDIO variables in card */ + card->mp_rd_bitmap = 0; + card->mp_wr_bitmap = 0; + card->curr_rd_port = 1; + card->curr_wr_port = 1; + + card->mp_data_port_mask = DATA_PORT_MASK; + + card->mpa_tx.buf_len = 0; + card->mpa_tx.pkt_cnt = 0; + card->mpa_tx.start_port = 0; + + card->mpa_tx.enabled = 0; + card->mpa_tx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT; + + card->mpa_rx.buf_len = 0; + card->mpa_rx.pkt_cnt = 0; + card->mpa_rx.start_port = 0; + + card->mpa_rx.enabled = 0; + card->mpa_rx.pkt_aggr_limit = SDIO_MP_AGGR_DEF_PKT_LIMIT; + + /* Allocate buffers for SDIO MP-A */ + card->mp_regs = kzalloc(MAX_MP_REGS, GFP_KERNEL); + if (!card->mp_regs) { + dev_err(adapter->dev, "failed to alloc mp_regs\n"); + return -1; + } + + ret = mwifiex_alloc_sdio_mpa_buffers(adapter, + SDIO_MP_TX_AGGR_DEF_BUF_SIZE, + SDIO_MP_RX_AGGR_DEF_BUF_SIZE); + if (ret) { + dev_err(adapter->dev, "failed to alloc sdio mp-a buffers\n"); + kfree(card->mp_regs); + return -1; + } + + return ret; +} + +/* + * This function resets the MPA Tx and Rx buffers. + */ +static void mwifiex_cleanup_mpa_buf(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + MP_TX_AGGR_BUF_RESET(card); + MP_RX_AGGR_BUF_RESET(card); +} + +/* + * This function cleans up the allocated card buffers. + * + * The following are freed by this function - + * - MP registers + * - MPA Tx buffer + * - MPA Rx buffer + */ +static void mwifiex_cleanup_sdio(struct mwifiex_adapter *adapter) +{ + struct sdio_mmc_card *card = adapter->card; + + kfree(card->mp_regs); + kfree(card->mpa_tx.buf); + kfree(card->mpa_rx.buf); +} + +/* + * This function updates the MP end port in card. + */ +static void +mwifiex_update_mp_end_port(struct mwifiex_adapter *adapter, u16 port) +{ + struct sdio_mmc_card *card = adapter->card; + int i; + + card->mp_end_port = port; + + card->mp_data_port_mask = DATA_PORT_MASK; + + for (i = 1; i <= MAX_PORT - card->mp_end_port; i++) + card->mp_data_port_mask &= ~(1 << (MAX_PORT - i)); + + card->curr_wr_port = 1; + + dev_dbg(adapter->dev, "cmd: mp_end_port %d, data port mask 0x%x\n", + port, card->mp_data_port_mask); +} + +static struct mwifiex_if_ops sdio_ops = { + .init_if = mwifiex_init_sdio, + .cleanup_if = mwifiex_cleanup_sdio, + .check_fw_status = mwifiex_check_fw_status, + .prog_fw = mwifiex_prog_fw_w_helper, + .register_dev = mwifiex_register_dev, + .unregister_dev = mwifiex_unregister_dev, + .enable_int = mwifiex_sdio_enable_host_int, + .process_int_status = mwifiex_process_int_status, + .host_to_card = mwifiex_sdio_host_to_card, + .wakeup = mwifiex_pm_wakeup_card, + .wakeup_complete = mwifiex_pm_wakeup_card_complete, + + /* SDIO specific */ + .update_mp_end_port = mwifiex_update_mp_end_port, + .cleanup_mpa_buf = mwifiex_cleanup_mpa_buf, +}; + +/* + * This function initializes the SDIO driver. + * + * This initiates the semaphore and registers the device with + * SDIO bus. + */ +static int +mwifiex_sdio_init_module(void) +{ + int ret; + + sema_init(&add_remove_card_sem, 1); + + ret = sdio_register_driver(&mwifiex_sdio); + + return ret; +} + +/* + * This function cleans up the SDIO driver. + * + * The following major steps are followed for cleanup - + * - Resume the device if its suspended + * - Disconnect the device if connected + * - Shutdown the firmware + * - Unregister the device from SDIO bus. + */ +static void +mwifiex_sdio_cleanup_module(void) +{ + struct mwifiex_adapter *adapter = g_adapter; + int i; + + if (down_interruptible(&add_remove_card_sem)) + goto exit_sem_err; + + if (!adapter || !adapter->priv_num) + goto exit; + + if (adapter->is_suspended) + mwifiex_sdio_resume(adapter->dev); + + for (i = 0; i < adapter->priv_num; i++) + if ((GET_BSS_ROLE(adapter->priv[i]) == MWIFIEX_BSS_ROLE_STA) && + adapter->priv[i]->media_connected) + mwifiex_disconnect(adapter->priv[i], MWIFIEX_CMD_WAIT, + NULL); + + if (!adapter->surprise_removed) + mwifiex_shutdown_fw(mwifiex_get_priv + (adapter, MWIFIEX_BSS_ROLE_ANY), + MWIFIEX_CMD_WAIT); + +exit: + up(&add_remove_card_sem); + +exit_sem_err: + sdio_unregister_driver(&mwifiex_sdio); +} + +module_init(mwifiex_sdio_init_module); +module_exit(mwifiex_sdio_cleanup_module); + +MODULE_AUTHOR("Marvell International Ltd."); +MODULE_DESCRIPTION("Marvell WiFi-Ex SDIO Driver version " SDIO_VERSION); +MODULE_VERSION(SDIO_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE("sd8787.bin"); diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h new file mode 100644 index 000000000000..a0e9bc5253e0 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -0,0 +1,305 @@ +/* + * Marvell Wireless LAN device driver: SDIO specific definitions + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_SDIO_H +#define _MWIFIEX_SDIO_H + + +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_ids.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/card.h> + +#include "main.h" + +#define BLOCK_MODE 1 +#define BYTE_MODE 0 + +#define REG_PORT 0 +#define RD_BITMAP_L 0x04 +#define RD_BITMAP_U 0x05 +#define WR_BITMAP_L 0x06 +#define WR_BITMAP_U 0x07 +#define RD_LEN_P0_L 0x08 +#define RD_LEN_P0_U 0x09 + +#define MWIFIEX_SDIO_IO_PORT_MASK 0xfffff + +#define MWIFIEX_SDIO_BYTE_MODE_MASK 0x80000000 + +#define CTRL_PORT 0 +#define CTRL_PORT_MASK 0x0001 +#define DATA_PORT_MASK 0xfffe + +#define MAX_MP_REGS 64 +#define MAX_PORT 16 + +#define SDIO_MP_AGGR_DEF_PKT_LIMIT 8 + +#define SDIO_MP_TX_AGGR_DEF_BUF_SIZE (4096) /* 4K */ + +/* Multi port RX aggregation buffer size */ +#define SDIO_MP_RX_AGGR_DEF_BUF_SIZE (4096) /* 4K */ + +/* Misc. Config Register : Auto Re-enable interrupts */ +#define AUTO_RE_ENABLE_INT BIT(4) + +/* Host Control Registers */ +/* Host Control Registers : I/O port 0 */ +#define IO_PORT_0_REG 0x78 +/* Host Control Registers : I/O port 1 */ +#define IO_PORT_1_REG 0x79 +/* Host Control Registers : I/O port 2 */ +#define IO_PORT_2_REG 0x7A + +/* Host Control Registers : Configuration */ +#define CONFIGURATION_REG 0x00 +/* Host Control Registers : Host without Command 53 finish host*/ +#define HOST_TO_CARD_EVENT (0x1U << 3) +/* Host Control Registers : Host without Command 53 finish host */ +#define HOST_WO_CMD53_FINISH_HOST (0x1U << 2) +/* Host Control Registers : Host power up */ +#define HOST_POWER_UP (0x1U << 1) +/* Host Control Registers : Host power down */ +#define HOST_POWER_DOWN (0x1U << 0) + +/* Host Control Registers : Host interrupt mask */ +#define HOST_INT_MASK_REG 0x02 +/* Host Control Registers : Upload host interrupt mask */ +#define UP_LD_HOST_INT_MASK (0x1U) +/* Host Control Registers : Download host interrupt mask */ +#define DN_LD_HOST_INT_MASK (0x2U) +/* Enable Host interrupt mask */ +#define HOST_INT_ENABLE (UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK) +/* Disable Host interrupt mask */ +#define HOST_INT_DISABLE 0xff + +/* Host Control Registers : Host interrupt status */ +#define HOST_INTSTATUS_REG 0x03 +/* Host Control Registers : Upload host interrupt status */ +#define UP_LD_HOST_INT_STATUS (0x1U) +/* Host Control Registers : Download host interrupt status */ +#define DN_LD_HOST_INT_STATUS (0x2U) + +/* Host Control Registers : Host interrupt RSR */ +#define HOST_INT_RSR_REG 0x01 +/* Host Control Registers : Upload host interrupt RSR */ +#define UP_LD_HOST_INT_RSR (0x1U) +#define SDIO_INT_MASK 0x3F + +/* Host Control Registers : Host interrupt status */ +#define HOST_INT_STATUS_REG 0x28 +/* Host Control Registers : Upload CRC error */ +#define UP_LD_CRC_ERR (0x1U << 2) +/* Host Control Registers : Upload restart */ +#define UP_LD_RESTART (0x1U << 1) +/* Host Control Registers : Download restart */ +#define DN_LD_RESTART (0x1U << 0) + +/* Card Control Registers : Card status register */ +#define CARD_STATUS_REG 0x30 +/* Card Control Registers : Card I/O ready */ +#define CARD_IO_READY (0x1U << 3) +/* Card Control Registers : CIS card ready */ +#define CIS_CARD_RDY (0x1U << 2) +/* Card Control Registers : Upload card ready */ +#define UP_LD_CARD_RDY (0x1U << 1) +/* Card Control Registers : Download card ready */ +#define DN_LD_CARD_RDY (0x1U << 0) + +/* Card Control Registers : Host interrupt mask register */ +#define HOST_INTERRUPT_MASK_REG 0x34 +/* Card Control Registers : Host power interrupt mask */ +#define HOST_POWER_INT_MASK (0x1U << 3) +/* Card Control Registers : Abort card interrupt mask */ +#define ABORT_CARD_INT_MASK (0x1U << 2) +/* Card Control Registers : Upload card interrupt mask */ +#define UP_LD_CARD_INT_MASK (0x1U << 1) +/* Card Control Registers : Download card interrupt mask */ +#define DN_LD_CARD_INT_MASK (0x1U << 0) + +/* Card Control Registers : Card interrupt status register */ +#define CARD_INTERRUPT_STATUS_REG 0x38 +/* Card Control Registers : Power up interrupt */ +#define POWER_UP_INT (0x1U << 4) +/* Card Control Registers : Power down interrupt */ +#define POWER_DOWN_INT (0x1U << 3) + +/* Card Control Registers : Card interrupt RSR register */ +#define CARD_INTERRUPT_RSR_REG 0x3c +/* Card Control Registers : Power up RSR */ +#define POWER_UP_RSR (0x1U << 4) +/* Card Control Registers : Power down RSR */ +#define POWER_DOWN_RSR (0x1U << 3) + +/* Card Control Registers : Miscellaneous Configuration Register */ +#define CARD_MISC_CFG_REG 0x6C + +/* Host F1 read base 0 */ +#define HOST_F1_RD_BASE_0 0x0040 +/* Host F1 read base 1 */ +#define HOST_F1_RD_BASE_1 0x0041 +/* Host F1 card ready */ +#define HOST_F1_CARD_RDY 0x0020 + +/* Firmware status 0 register */ +#define CARD_FW_STATUS0_REG 0x60 +/* Firmware status 1 register */ +#define CARD_FW_STATUS1_REG 0x61 +/* Rx length register */ +#define CARD_RX_LEN_REG 0x62 +/* Rx unit register */ +#define CARD_RX_UNIT_REG 0x63 + +/* Event header Len*/ +#define MWIFIEX_EVENT_HEADER_LEN 8 + +/* Max retry number of CMD53 write */ +#define MAX_WRITE_IOMEM_RETRY 2 + +/* SDIO Tx aggregation in progress ? */ +#define MP_TX_AGGR_IN_PROGRESS(a) (a->mpa_tx.pkt_cnt > 0) + +/* SDIO Tx aggregation buffer room for next packet ? */ +#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ((a->mpa_tx.buf_len+len) \ + <= a->mpa_tx.buf_size) + +/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */ +#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \ + memmove(&a->mpa_tx.buf[a->mpa_tx.buf_len], \ + payload, pkt_len); \ + a->mpa_tx.buf_len += pkt_len; \ + if (!a->mpa_tx.pkt_cnt) \ + a->mpa_tx.start_port = port; \ + if (a->mpa_tx.start_port <= port) \ + a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt)); \ + else \ + a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT - \ + a->mp_end_port))); \ + a->mpa_tx.pkt_cnt++; \ +} while (0); + +/* SDIO Tx aggregation limit ? */ +#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) \ + (a->mpa_tx.pkt_cnt == a->mpa_tx.pkt_aggr_limit) + +/* SDIO Tx aggregation port limit ? */ +#define MP_TX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_wr_port < \ + a->mpa_tx.start_port) && (((MAX_PORT - \ + a->mpa_tx.start_port) + a->curr_wr_port) >= \ + SDIO_MP_AGGR_DEF_PKT_LIMIT)) + +/* Reset SDIO Tx aggregation buffer parameters */ +#define MP_TX_AGGR_BUF_RESET(a) do { \ + a->mpa_tx.pkt_cnt = 0; \ + a->mpa_tx.buf_len = 0; \ + a->mpa_tx.ports = 0; \ + a->mpa_tx.start_port = 0; \ +} while (0); + +/* SDIO Rx aggregation limit ? */ +#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) \ + (a->mpa_rx.pkt_cnt == a->mpa_rx.pkt_aggr_limit) + +/* SDIO Tx aggregation port limit ? */ +#define MP_RX_AGGR_PORT_LIMIT_REACHED(a) ((a->curr_rd_port < \ + a->mpa_rx.start_port) && (((MAX_PORT - \ + a->mpa_rx.start_port) + a->curr_rd_port) >= \ + SDIO_MP_AGGR_DEF_PKT_LIMIT)) + +/* SDIO Rx aggregation in progress ? */ +#define MP_RX_AGGR_IN_PROGRESS(a) (a->mpa_rx.pkt_cnt > 0) + +/* SDIO Rx aggregation buffer room for next packet ? */ +#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) \ + ((a->mpa_rx.buf_len+rx_len) <= a->mpa_rx.buf_size) + +/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */ +#define MP_RX_AGGR_SETUP(a, skb, port) do { \ + a->mpa_rx.buf_len += skb->len; \ + if (!a->mpa_rx.pkt_cnt) \ + a->mpa_rx.start_port = port; \ + if (a->mpa_rx.start_port <= port) \ + a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt)); \ + else \ + a->mpa_rx.ports |= (1<<(a->mpa_rx.pkt_cnt+1)); \ + a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb; \ + a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len; \ + a->mpa_rx.pkt_cnt++; \ +} while (0); + +/* Reset SDIO Rx aggregation buffer parameters */ +#define MP_RX_AGGR_BUF_RESET(a) do { \ + a->mpa_rx.pkt_cnt = 0; \ + a->mpa_rx.buf_len = 0; \ + a->mpa_rx.ports = 0; \ + a->mpa_rx.start_port = 0; \ +} while (0); + + +/* data structure for SDIO MPA TX */ +struct mwifiex_sdio_mpa_tx { + /* multiport tx aggregation buffer pointer */ + u8 *buf; + u32 buf_len; + u32 pkt_cnt; + u16 ports; + u16 start_port; + u8 enabled; + u32 buf_size; + u32 pkt_aggr_limit; +}; + +struct mwifiex_sdio_mpa_rx { + u8 *buf; + u32 buf_len; + u32 pkt_cnt; + u16 ports; + u16 start_port; + + struct sk_buff *skb_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT]; + u32 len_arr[SDIO_MP_AGGR_DEF_PKT_LIMIT]; + + u8 enabled; + u32 buf_size; + u32 pkt_aggr_limit; +}; + +int mwifiex_bus_register(void); +void mwifiex_bus_unregister(void); + +struct sdio_mmc_card { + struct sdio_func *func; + struct mwifiex_adapter *adapter; + + u16 mp_rd_bitmap; + u16 mp_wr_bitmap; + + u16 mp_end_port; + u16 mp_data_port_mask; + + u8 curr_rd_port; + u8 curr_wr_port; + + u8 *mp_regs; + + struct mwifiex_sdio_mpa_tx mpa_tx; + struct mwifiex_sdio_mpa_rx mpa_rx; +}; +#endif /* _MWIFIEX_SDIO_H */ diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c new file mode 100644 index 000000000000..6fff26153e26 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_cmd.c @@ -0,0 +1,1226 @@ +/* + * Marvell Wireless LAN device driver: station command handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +/* + * This function prepares command to set/get RSSI information. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting data/beacon average factors + * - Resetting SNR/NF/RSSI values in private structure + * - Ensuring correct endian-ness + */ +static int +mwifiex_cmd_802_11_rssi_info(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, u16 cmd_action) +{ + cmd->command = cpu_to_le16(HostCmd_CMD_RSSI_INFO); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_rssi_info) + + S_DS_GEN); + cmd->params.rssi_info.action = cpu_to_le16(cmd_action); + cmd->params.rssi_info.ndata = cpu_to_le16(priv->data_avg_factor); + cmd->params.rssi_info.nbcn = cpu_to_le16(priv->bcn_avg_factor); + + /* Reset SNR/NF/RSSI values in private structure */ + priv->data_rssi_last = 0; + priv->data_nf_last = 0; + priv->data_rssi_avg = 0; + priv->data_nf_avg = 0; + priv->bcn_rssi_last = 0; + priv->bcn_nf_last = 0; + priv->bcn_rssi_avg = 0; + priv->bcn_nf_avg = 0; + + return 0; +} + +/* + * This function prepares command to set MAC control. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_mac_control(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct host_cmd_ds_mac_control *mac_ctrl = &cmd->params.mac_ctrl; + u16 action = *((u16 *) data_buf); + + if (cmd_action != HostCmd_ACT_GEN_SET) { + dev_err(priv->adapter->dev, + "mac_control: only support set cmd\n"); + return -1; + } + + cmd->command = cpu_to_le16(HostCmd_CMD_MAC_CONTROL); + cmd->size = + cpu_to_le16(sizeof(struct host_cmd_ds_mac_control) + S_DS_GEN); + mac_ctrl->action = cpu_to_le16(action); + + return 0; +} + +/* + * This function prepares command to set/get SNMP MIB. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting SNMP MIB OID number and value + * (as required) + * - Ensuring correct endian-ness + * + * The following SNMP MIB OIDs are supported - + * - FRAG_THRESH_I : Fragmentation threshold + * - RTS_THRESH_I : RTS threshold + * - SHORT_RETRY_LIM_I : Short retry limit + * - DOT11D_I : 11d support + */ +static int mwifiex_cmd_802_11_snmp_mib(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, u32 cmd_oid, + void *data_buf) +{ + struct host_cmd_ds_802_11_snmp_mib *snmp_mib = &cmd->params.smib; + u32 ul_temp; + + dev_dbg(priv->adapter->dev, "cmd: SNMP_CMD: cmd_oid = 0x%x\n", cmd_oid); + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_SNMP_MIB); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_snmp_mib) + - 1 + S_DS_GEN); + + if (cmd_action == HostCmd_ACT_GEN_GET) { + snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_GET); + snmp_mib->buf_size = cpu_to_le16(MAX_SNMP_BUF_SIZE); + cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) + + MAX_SNMP_BUF_SIZE); + } + + switch (cmd_oid) { + case FRAG_THRESH_I: + snmp_mib->oid = cpu_to_le16((u16) FRAG_THRESH_I); + if (cmd_action == HostCmd_ACT_GEN_SET) { + snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET); + snmp_mib->buf_size = cpu_to_le16(sizeof(u16)); + ul_temp = *((u32 *) data_buf); + *((__le16 *) (snmp_mib->value)) = + cpu_to_le16((u16) ul_temp); + cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) + + sizeof(u16)); + } + break; + case RTS_THRESH_I: + snmp_mib->oid = cpu_to_le16((u16) RTS_THRESH_I); + if (cmd_action == HostCmd_ACT_GEN_SET) { + snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET); + snmp_mib->buf_size = cpu_to_le16(sizeof(u16)); + ul_temp = *((u32 *) data_buf); + *(__le16 *) (snmp_mib->value) = + cpu_to_le16((u16) ul_temp); + cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) + + sizeof(u16)); + } + break; + + case SHORT_RETRY_LIM_I: + snmp_mib->oid = cpu_to_le16((u16) SHORT_RETRY_LIM_I); + if (cmd_action == HostCmd_ACT_GEN_SET) { + snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET); + snmp_mib->buf_size = cpu_to_le16(sizeof(u16)); + ul_temp = (*(u32 *) data_buf); + *((__le16 *) (snmp_mib->value)) = + cpu_to_le16((u16) ul_temp); + cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) + + sizeof(u16)); + } + break; + case DOT11D_I: + snmp_mib->oid = cpu_to_le16((u16) DOT11D_I); + if (cmd_action == HostCmd_ACT_GEN_SET) { + snmp_mib->query_type = cpu_to_le16(HostCmd_ACT_GEN_SET); + snmp_mib->buf_size = cpu_to_le16(sizeof(u16)); + ul_temp = *(u32 *) data_buf; + *((__le16 *) (snmp_mib->value)) = + cpu_to_le16((u16) ul_temp); + cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) + + sizeof(u16)); + } + break; + default: + break; + } + dev_dbg(priv->adapter->dev, + "cmd: SNMP_CMD: Action=0x%x, OID=0x%x, OIDSize=0x%x," + " Value=0x%x\n", + cmd_action, cmd_oid, le16_to_cpu(snmp_mib->buf_size), + le16_to_cpu(*(__le16 *) snmp_mib->value)); + return 0; +} + +/* + * This function prepares command to get log. + * + * Preparation includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +static int +mwifiex_cmd_802_11_get_log(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd) +{ + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_GET_LOG); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_get_log) + + S_DS_GEN); + return 0; +} + +/* + * This function prepares command to set/get Tx data rate configuration. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting configuration index, rate scope and rate drop pattern + * parameters (as required) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_tx_rate_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct host_cmd_ds_tx_rate_cfg *rate_cfg = &cmd->params.tx_rate_cfg; + struct mwifiex_rate_scope *rate_scope; + struct mwifiex_rate_drop_pattern *rate_drop; + u16 *pbitmap_rates = (u16 *) data_buf; + + u32 i; + + cmd->command = cpu_to_le16(HostCmd_CMD_TX_RATE_CFG); + + rate_cfg->action = cpu_to_le16(cmd_action); + rate_cfg->cfg_index = 0; + + rate_scope = (struct mwifiex_rate_scope *) ((u8 *) rate_cfg + + sizeof(struct host_cmd_ds_tx_rate_cfg)); + rate_scope->type = cpu_to_le16(TLV_TYPE_RATE_SCOPE); + rate_scope->length = cpu_to_le16(sizeof(struct mwifiex_rate_scope) - + sizeof(struct mwifiex_ie_types_header)); + if (pbitmap_rates != NULL) { + rate_scope->hr_dsss_rate_bitmap = cpu_to_le16(pbitmap_rates[0]); + rate_scope->ofdm_rate_bitmap = cpu_to_le16(pbitmap_rates[1]); + for (i = 0; + i < sizeof(rate_scope->ht_mcs_rate_bitmap) / sizeof(u16); + i++) + rate_scope->ht_mcs_rate_bitmap[i] = + cpu_to_le16(pbitmap_rates[2 + i]); + } else { + rate_scope->hr_dsss_rate_bitmap = + cpu_to_le16(priv->bitmap_rates[0]); + rate_scope->ofdm_rate_bitmap = + cpu_to_le16(priv->bitmap_rates[1]); + for (i = 0; + i < sizeof(rate_scope->ht_mcs_rate_bitmap) / sizeof(u16); + i++) + rate_scope->ht_mcs_rate_bitmap[i] = + cpu_to_le16(priv->bitmap_rates[2 + i]); + } + + rate_drop = (struct mwifiex_rate_drop_pattern *) ((u8 *) rate_scope + + sizeof(struct mwifiex_rate_scope)); + rate_drop->type = cpu_to_le16(TLV_TYPE_RATE_DROP_CONTROL); + rate_drop->length = cpu_to_le16(sizeof(rate_drop->rate_drop_mode)); + rate_drop->rate_drop_mode = 0; + + cmd->size = + cpu_to_le16(S_DS_GEN + sizeof(struct host_cmd_ds_tx_rate_cfg) + + sizeof(struct mwifiex_rate_scope) + + sizeof(struct mwifiex_rate_drop_pattern)); + + return 0; +} + +/* + * This function prepares command to set/get Tx power configuration. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting Tx power mode, power group TLV + * (as required) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_tx_power_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct mwifiex_types_power_group *pg_tlv = NULL; + struct host_cmd_ds_txpwr_cfg *txp = NULL; + struct host_cmd_ds_txpwr_cfg *cmd_txp_cfg = &cmd->params.txp_cfg; + + cmd->command = cpu_to_le16(HostCmd_CMD_TXPWR_CFG); + cmd->size = + cpu_to_le16(S_DS_GEN + sizeof(struct host_cmd_ds_txpwr_cfg)); + switch (cmd_action) { + case HostCmd_ACT_GEN_SET: + txp = (struct host_cmd_ds_txpwr_cfg *) data_buf; + if (txp->mode) { + pg_tlv = (struct mwifiex_types_power_group + *) ((unsigned long) data_buf + + sizeof(struct host_cmd_ds_txpwr_cfg)); + memmove(cmd_txp_cfg, data_buf, + sizeof(struct host_cmd_ds_txpwr_cfg) + + sizeof(struct mwifiex_types_power_group) + + pg_tlv->length); + + pg_tlv = (struct mwifiex_types_power_group *) ((u8 *) + cmd_txp_cfg + + sizeof(struct host_cmd_ds_txpwr_cfg)); + cmd->size = cpu_to_le16(le16_to_cpu(cmd->size) + + sizeof(struct mwifiex_types_power_group) + + pg_tlv->length); + } else { + memmove(cmd_txp_cfg, data_buf, + sizeof(struct host_cmd_ds_txpwr_cfg)); + } + cmd_txp_cfg->action = cpu_to_le16(cmd_action); + break; + case HostCmd_ACT_GEN_GET: + cmd_txp_cfg->action = cpu_to_le16(cmd_action); + break; + } + + return 0; +} + +/* + * This function prepares command to set Host Sleep configuration. + * + * Preparation includes - + * - Setting command ID and proper size + * - Setting Host Sleep action, conditions, ARP filters + * (as required) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11_hs_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, + struct mwifiex_hs_config_param *data_buf) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_hs_cfg_enh *hs_cfg = &cmd->params.opt_hs_cfg; + u16 hs_activate = false; + + if (data_buf == NULL) + /* New Activate command */ + hs_activate = true; + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_HS_CFG_ENH); + + if (!hs_activate && + (data_buf->conditions + != cpu_to_le32(HOST_SLEEP_CFG_CANCEL)) + && ((adapter->arp_filter_size > 0) + && (adapter->arp_filter_size <= ARP_FILTER_MAX_BUF_SIZE))) { + dev_dbg(adapter->dev, + "cmd: Attach %d bytes ArpFilter to HSCfg cmd\n", + adapter->arp_filter_size); + memcpy(((u8 *) hs_cfg) + + sizeof(struct host_cmd_ds_802_11_hs_cfg_enh), + adapter->arp_filter, adapter->arp_filter_size); + cmd->size = cpu_to_le16(adapter->arp_filter_size + + sizeof(struct host_cmd_ds_802_11_hs_cfg_enh) + + S_DS_GEN); + } else { + cmd->size = cpu_to_le16(S_DS_GEN + sizeof(struct + host_cmd_ds_802_11_hs_cfg_enh)); + } + if (hs_activate) { + hs_cfg->action = cpu_to_le16(HS_ACTIVATE); + hs_cfg->params.hs_activate.resp_ctrl = RESP_NEEDED; + } else { + hs_cfg->action = cpu_to_le16(HS_CONFIGURE); + hs_cfg->params.hs_config.conditions = data_buf->conditions; + hs_cfg->params.hs_config.gpio = data_buf->gpio; + hs_cfg->params.hs_config.gap = data_buf->gap; + dev_dbg(adapter->dev, + "cmd: HS_CFG_CMD: condition:0x%x gpio:0x%x gap:0x%x\n", + hs_cfg->params.hs_config.conditions, + hs_cfg->params.hs_config.gpio, + hs_cfg->params.hs_config.gap); + } + + return 0; +} + +/* + * This function prepares command to set/get MAC address. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting MAC address (for SET only) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11_mac_address(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action) +{ + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_MAC_ADDRESS); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_mac_address) + + S_DS_GEN); + cmd->result = 0; + + cmd->params.mac_addr.action = cpu_to_le16(cmd_action); + + if (cmd_action == HostCmd_ACT_GEN_SET) + memcpy(cmd->params.mac_addr.mac_addr, priv->curr_addr, + ETH_ALEN); + return 0; +} + +/* + * This function prepares command to set MAC multicast address. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting MAC multicast address + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_mac_multicast_adr(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct mwifiex_multicast_list *mcast_list = + (struct mwifiex_multicast_list *) data_buf; + struct host_cmd_ds_mac_multicast_adr *mcast_addr = &cmd->params.mc_addr; + + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_mac_multicast_adr) + + S_DS_GEN); + cmd->command = cpu_to_le16(HostCmd_CMD_MAC_MULTICAST_ADR); + + mcast_addr->action = cpu_to_le16(cmd_action); + mcast_addr->num_of_adrs = + cpu_to_le16((u16) mcast_list->num_multicast_addr); + memcpy(mcast_addr->mac_list, mcast_list->mac_list, + mcast_list->num_multicast_addr * ETH_ALEN); + + return 0; +} + +/* + * This function prepares command to deauthenticate. + * + * Preparation includes - + * - Setting command ID and proper size + * - Setting AP MAC address and reason code + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11_deauthenticate(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + void *data_buf) +{ + struct host_cmd_ds_802_11_deauthenticate *deauth = &cmd->params.deauth; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_DEAUTHENTICATE); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_deauthenticate) + + S_DS_GEN); + + /* Set AP MAC address */ + memcpy(deauth->mac_addr, (u8 *) data_buf, ETH_ALEN); + + dev_dbg(priv->adapter->dev, "cmd: Deauth: %pM\n", deauth->mac_addr); + + deauth->reason_code = cpu_to_le16(WLAN_REASON_DEAUTH_LEAVING); + + return 0; +} + +/* + * This function prepares command to stop Ad-Hoc network. + * + * Preparation includes - + * - Setting command ID and proper size + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11_ad_hoc_stop(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd) +{ + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_AD_HOC_STOP); + cmd->size = cpu_to_le16(S_DS_GEN); + return 0; +} + +/* + * This function sets WEP key(s) to key parameter TLV(s). + * + * Multi-key parameter TLVs are supported, so we can send multiple + * WEP keys in a single buffer. + */ +static int +mwifiex_set_keyparamset_wep(struct mwifiex_private *priv, + struct mwifiex_ie_type_key_param_set *key_param_set, + u16 *key_param_len) +{ + int cur_key_param_len = 0; + u8 i; + + /* Multi-key_param_set TLV is supported */ + for (i = 0; i < NUM_WEP_KEYS; i++) { + if ((priv->wep_key[i].key_length == WLAN_KEY_LEN_WEP40) || + (priv->wep_key[i].key_length == WLAN_KEY_LEN_WEP104)) { + key_param_set->type = + cpu_to_le16(TLV_TYPE_KEY_MATERIAL); +/* Key_param_set WEP fixed length */ +#define KEYPARAMSET_WEP_FIXED_LEN 8 + key_param_set->length = cpu_to_le16((u16) + (priv->wep_key[i]. + key_length + + KEYPARAMSET_WEP_FIXED_LEN)); + key_param_set->key_type_id = + cpu_to_le16(KEY_TYPE_ID_WEP); + key_param_set->key_info = + cpu_to_le16(KEY_INFO_WEP_ENABLED | + KEY_INFO_WEP_UNICAST | + KEY_INFO_WEP_MCAST); + key_param_set->key_len = + cpu_to_le16(priv->wep_key[i].key_length); + /* Set WEP key index */ + key_param_set->key[0] = i; + /* Set default Tx key flag */ + if (i == + (priv-> + wep_key_curr_index & HostCmd_WEP_KEY_INDEX_MASK)) + key_param_set->key[1] = 1; + else + key_param_set->key[1] = 0; + memmove(&key_param_set->key[2], + priv->wep_key[i].key_material, + priv->wep_key[i].key_length); + + cur_key_param_len = priv->wep_key[i].key_length + + KEYPARAMSET_WEP_FIXED_LEN + + sizeof(struct mwifiex_ie_types_header); + *key_param_len += (u16) cur_key_param_len; + key_param_set = + (struct mwifiex_ie_type_key_param_set *) + ((u8 *)key_param_set + + cur_key_param_len); + } else if (!priv->wep_key[i].key_length) { + continue; + } else { + dev_err(priv->adapter->dev, + "key%d Length = %d is incorrect\n", + (i + 1), priv->wep_key[i].key_length); + return -1; + } + } + + return 0; +} + +/* + * This function prepares command to set/get/reset network key(s). + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting WEP keys, WAPI keys or WPA keys along with required + * encryption (TKIP, AES) (as required) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11_key_material(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, + u32 cmd_oid, void *data_buf) +{ + struct host_cmd_ds_802_11_key_material *key_material = + &cmd->params.key_material; + struct mwifiex_ds_encrypt_key *enc_key = + (struct mwifiex_ds_encrypt_key *) data_buf; + u16 key_param_len = 0; + int ret = 0; + const u8 bc_mac[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_KEY_MATERIAL); + key_material->action = cpu_to_le16(cmd_action); + + if (cmd_action == HostCmd_ACT_GEN_GET) { + cmd->size = + cpu_to_le16(sizeof(key_material->action) + S_DS_GEN); + return ret; + } + + if (!enc_key) { + memset(&key_material->key_param_set, 0, + (NUM_WEP_KEYS * + sizeof(struct mwifiex_ie_type_key_param_set))); + ret = mwifiex_set_keyparamset_wep(priv, + &key_material->key_param_set, + &key_param_len); + cmd->size = cpu_to_le16(key_param_len + + sizeof(key_material->action) + S_DS_GEN); + return ret; + } else + memset(&key_material->key_param_set, 0, + sizeof(struct mwifiex_ie_type_key_param_set)); + if (enc_key->is_wapi_key) { + dev_dbg(priv->adapter->dev, "info: Set WAPI Key\n"); + key_material->key_param_set.key_type_id = + cpu_to_le16(KEY_TYPE_ID_WAPI); + if (cmd_oid == KEY_INFO_ENABLED) + key_material->key_param_set.key_info = + cpu_to_le16(KEY_INFO_WAPI_ENABLED); + else + key_material->key_param_set.key_info = + cpu_to_le16(!KEY_INFO_WAPI_ENABLED); + + key_material->key_param_set.key[0] = enc_key->key_index; + if (!priv->sec_info.wapi_key_on) + key_material->key_param_set.key[1] = 1; + else + /* set 0 when re-key */ + key_material->key_param_set.key[1] = 0; + + if (0 != memcmp(enc_key->mac_addr, bc_mac, sizeof(bc_mac))) { + /* WAPI pairwise key: unicast */ + key_material->key_param_set.key_info |= + cpu_to_le16(KEY_INFO_WAPI_UNICAST); + } else { /* WAPI group key: multicast */ + key_material->key_param_set.key_info |= + cpu_to_le16(KEY_INFO_WAPI_MCAST); + priv->sec_info.wapi_key_on = true; + } + + key_material->key_param_set.type = + cpu_to_le16(TLV_TYPE_KEY_MATERIAL); + key_material->key_param_set.key_len = + cpu_to_le16(WAPI_KEY_LEN); + memcpy(&key_material->key_param_set.key[2], + enc_key->key_material, enc_key->key_len); + memcpy(&key_material->key_param_set.key[2 + enc_key->key_len], + enc_key->wapi_rxpn, WAPI_RXPN_LEN); + key_material->key_param_set.length = + cpu_to_le16(WAPI_KEY_LEN + KEYPARAMSET_FIXED_LEN); + + key_param_len = (WAPI_KEY_LEN + KEYPARAMSET_FIXED_LEN) + + sizeof(struct mwifiex_ie_types_header); + cmd->size = cpu_to_le16(key_param_len + + sizeof(key_material->action) + S_DS_GEN); + return ret; + } + if (enc_key->key_len == WLAN_KEY_LEN_CCMP) { + dev_dbg(priv->adapter->dev, "cmd: WPA_AES\n"); + key_material->key_param_set.key_type_id = + cpu_to_le16(KEY_TYPE_ID_AES); + if (cmd_oid == KEY_INFO_ENABLED) + key_material->key_param_set.key_info = + cpu_to_le16(KEY_INFO_AES_ENABLED); + else + key_material->key_param_set.key_info = + cpu_to_le16(!KEY_INFO_AES_ENABLED); + + if (enc_key->key_index & MWIFIEX_KEY_INDEX_UNICAST) + /* AES pairwise key: unicast */ + key_material->key_param_set.key_info |= + cpu_to_le16(KEY_INFO_AES_UNICAST); + else /* AES group key: multicast */ + key_material->key_param_set.key_info |= + cpu_to_le16(KEY_INFO_AES_MCAST); + } else if (enc_key->key_len == WLAN_KEY_LEN_TKIP) { + dev_dbg(priv->adapter->dev, "cmd: WPA_TKIP\n"); + key_material->key_param_set.key_type_id = + cpu_to_le16(KEY_TYPE_ID_TKIP); + key_material->key_param_set.key_info = + cpu_to_le16(KEY_INFO_TKIP_ENABLED); + + if (enc_key->key_index & MWIFIEX_KEY_INDEX_UNICAST) + /* TKIP pairwise key: unicast */ + key_material->key_param_set.key_info |= + cpu_to_le16(KEY_INFO_TKIP_UNICAST); + else /* TKIP group key: multicast */ + key_material->key_param_set.key_info |= + cpu_to_le16(KEY_INFO_TKIP_MCAST); + } + + if (key_material->key_param_set.key_type_id) { + key_material->key_param_set.type = + cpu_to_le16(TLV_TYPE_KEY_MATERIAL); + key_material->key_param_set.key_len = + cpu_to_le16((u16) enc_key->key_len); + memcpy(key_material->key_param_set.key, enc_key->key_material, + enc_key->key_len); + key_material->key_param_set.length = + cpu_to_le16((u16) enc_key->key_len + + KEYPARAMSET_FIXED_LEN); + + key_param_len = (u16) (enc_key->key_len + KEYPARAMSET_FIXED_LEN) + + sizeof(struct mwifiex_ie_types_header); + + cmd->size = cpu_to_le16(key_param_len + + sizeof(key_material->action) + S_DS_GEN); + } + + return ret; +} + +/* + * This function prepares command to set/get 11d domain information. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting domain information fields (for SET only) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11d_domain_info(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11d_domain_info *domain_info = + &cmd->params.domain_info; + struct mwifiex_ietypes_domain_param_set *domain = + &domain_info->domain; + u8 no_of_triplet = adapter->domain_reg.no_of_triplet; + + dev_dbg(adapter->dev, "info: 11D: no_of_triplet=0x%x\n", no_of_triplet); + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11D_DOMAIN_INFO); + domain_info->action = cpu_to_le16(cmd_action); + if (cmd_action == HostCmd_ACT_GEN_GET) { + cmd->size = cpu_to_le16(sizeof(domain_info->action) + S_DS_GEN); + return 0; + } + + /* Set domain info fields */ + domain->header.type = cpu_to_le16(WLAN_EID_COUNTRY); + memcpy(domain->country_code, adapter->domain_reg.country_code, + sizeof(domain->country_code)); + + domain->header.len = cpu_to_le16((no_of_triplet * + sizeof(struct ieee80211_country_ie_triplet)) + + sizeof(domain->country_code)); + + if (no_of_triplet) { + memcpy(domain->triplet, adapter->domain_reg.triplet, + no_of_triplet * + sizeof(struct ieee80211_country_ie_triplet)); + + cmd->size = cpu_to_le16(sizeof(domain_info->action) + + le16_to_cpu(domain->header.len) + + sizeof(struct mwifiex_ie_types_header) + + S_DS_GEN); + } else { + cmd->size = cpu_to_le16(sizeof(domain_info->action) + S_DS_GEN); + } + + return 0; +} + +/* + * This function prepares command to set/get RF channel. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting RF type and current RF channel (for SET only) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_802_11_rf_channel(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct host_cmd_ds_802_11_rf_channel *rf_chan = + &cmd->params.rf_channel; + uint16_t rf_type = le16_to_cpu(rf_chan->rf_type); + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_RF_CHANNEL); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_rf_channel) + + S_DS_GEN); + + if (cmd_action == HostCmd_ACT_GEN_SET) { + if ((priv->adapter->adhoc_start_band & BAND_A) + || (priv->adapter->adhoc_start_band & BAND_AN)) + rf_chan->rf_type = + cpu_to_le16(HostCmd_SCAN_RADIO_TYPE_A); + + rf_type = le16_to_cpu(rf_chan->rf_type); + SET_SECONDARYCHAN(rf_type, priv->adapter->chan_offset); + rf_chan->current_channel = cpu_to_le16(*((u16 *) data_buf)); + } + rf_chan->action = cpu_to_le16(cmd_action); + return 0; +} + +/* + * This function prepares command to set/get IBSS coalescing status. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting status to enable or disable (for SET only) + * - Ensuring correct endian-ness + */ +static int mwifiex_cmd_ibss_coalescing_status(struct mwifiex_private *priv, + struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct host_cmd_ds_802_11_ibss_status *ibss_coal = + &(cmd->params.ibss_coalescing); + u16 enable = 0; + + cmd->command = cpu_to_le16(HostCmd_CMD_802_11_IBSS_COALESCING_STATUS); + cmd->size = cpu_to_le16(sizeof(struct host_cmd_ds_802_11_ibss_status) + + S_DS_GEN); + cmd->result = 0; + ibss_coal->action = cpu_to_le16(cmd_action); + + switch (cmd_action) { + case HostCmd_ACT_GEN_SET: + if (data_buf != NULL) + enable = *(u16 *) data_buf; + ibss_coal->enable = cpu_to_le16(enable); + break; + + /* In other case.. Nothing to do */ + case HostCmd_ACT_GEN_GET: + default: + break; + } + + return 0; +} + +/* + * This function prepares command to set/get register value. + * + * Preparation includes - + * - Setting command ID, action and proper size + * - Setting register offset (for both GET and SET) and + * register value (for SET only) + * - Ensuring correct endian-ness + * + * The following type of registers can be accessed with this function - + * - MAC register + * - BBP register + * - RF register + * - PMIC register + * - CAU register + * - EEPROM + */ +static int mwifiex_cmd_reg_access(struct host_cmd_ds_command *cmd, + u16 cmd_action, void *data_buf) +{ + struct mwifiex_ds_reg_rw *reg_rw; + + reg_rw = (struct mwifiex_ds_reg_rw *) data_buf; + switch (le16_to_cpu(cmd->command)) { + case HostCmd_CMD_MAC_REG_ACCESS: + { + struct host_cmd_ds_mac_reg_access *mac_reg; + + cmd->size = cpu_to_le16(sizeof(*mac_reg) + S_DS_GEN); + mac_reg = (struct host_cmd_ds_mac_reg_access *) &cmd-> + params.mac_reg; + mac_reg->action = cpu_to_le16(cmd_action); + mac_reg->offset = + cpu_to_le16((u16) le32_to_cpu(reg_rw->offset)); + mac_reg->value = reg_rw->value; + break; + } + case HostCmd_CMD_BBP_REG_ACCESS: + { + struct host_cmd_ds_bbp_reg_access *bbp_reg; + + cmd->size = cpu_to_le16(sizeof(*bbp_reg) + S_DS_GEN); + bbp_reg = (struct host_cmd_ds_bbp_reg_access *) &cmd-> + params.bbp_reg; + bbp_reg->action = cpu_to_le16(cmd_action); + bbp_reg->offset = + cpu_to_le16((u16) le32_to_cpu(reg_rw->offset)); + bbp_reg->value = (u8) le32_to_cpu(reg_rw->value); + break; + } + case HostCmd_CMD_RF_REG_ACCESS: + { + struct host_cmd_ds_rf_reg_access *rf_reg; + + cmd->size = cpu_to_le16(sizeof(*rf_reg) + S_DS_GEN); + rf_reg = (struct host_cmd_ds_rf_reg_access *) &cmd-> + params.rf_reg; + rf_reg->action = cpu_to_le16(cmd_action); + rf_reg->offset = + cpu_to_le16((u16) le32_to_cpu(reg_rw->offset)); + rf_reg->value = (u8) le32_to_cpu(reg_rw->value); + break; + } + case HostCmd_CMD_PMIC_REG_ACCESS: + { + struct host_cmd_ds_pmic_reg_access *pmic_reg; + + cmd->size = cpu_to_le16(sizeof(*pmic_reg) + S_DS_GEN); + pmic_reg = (struct host_cmd_ds_pmic_reg_access *) &cmd-> + params.pmic_reg; + pmic_reg->action = cpu_to_le16(cmd_action); + pmic_reg->offset = + cpu_to_le16((u16) le32_to_cpu(reg_rw->offset)); + pmic_reg->value = (u8) le32_to_cpu(reg_rw->value); + break; + } + case HostCmd_CMD_CAU_REG_ACCESS: + { + struct host_cmd_ds_rf_reg_access *cau_reg; + + cmd->size = cpu_to_le16(sizeof(*cau_reg) + S_DS_GEN); + cau_reg = (struct host_cmd_ds_rf_reg_access *) &cmd-> + params.rf_reg; + cau_reg->action = cpu_to_le16(cmd_action); + cau_reg->offset = + cpu_to_le16((u16) le32_to_cpu(reg_rw->offset)); + cau_reg->value = (u8) le32_to_cpu(reg_rw->value); + break; + } + case HostCmd_CMD_802_11_EEPROM_ACCESS: + { + struct mwifiex_ds_read_eeprom *rd_eeprom = + (struct mwifiex_ds_read_eeprom *) data_buf; + struct host_cmd_ds_802_11_eeprom_access *cmd_eeprom = + (struct host_cmd_ds_802_11_eeprom_access *) + &cmd->params.eeprom; + + cmd->size = cpu_to_le16(sizeof(*cmd_eeprom) + S_DS_GEN); + cmd_eeprom->action = cpu_to_le16(cmd_action); + cmd_eeprom->offset = rd_eeprom->offset; + cmd_eeprom->byte_count = rd_eeprom->byte_count; + cmd_eeprom->value = 0; + break; + } + default: + return -1; + } + + return 0; +} + +/* + * This function prepares the commands before sending them to the firmware. + * + * This is a generic function which calls specific command preparation + * routines based upon the command number. + */ +int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no, + u16 cmd_action, u32 cmd_oid, + void *data_buf, void *cmd_buf) +{ + struct host_cmd_ds_command *cmd_ptr = + (struct host_cmd_ds_command *) cmd_buf; + int ret = 0; + + /* Prepare command */ + switch (cmd_no) { + case HostCmd_CMD_GET_HW_SPEC: + ret = mwifiex_cmd_get_hw_spec(priv, cmd_ptr); + break; + case HostCmd_CMD_MAC_CONTROL: + ret = mwifiex_cmd_mac_control(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_802_11_MAC_ADDRESS: + ret = mwifiex_cmd_802_11_mac_address(priv, cmd_ptr, + cmd_action); + break; + case HostCmd_CMD_MAC_MULTICAST_ADR: + ret = mwifiex_cmd_mac_multicast_adr(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_TX_RATE_CFG: + ret = mwifiex_cmd_tx_rate_cfg(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_TXPWR_CFG: + ret = mwifiex_cmd_tx_power_cfg(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_802_11_PS_MODE_ENH: + ret = mwifiex_cmd_enh_power_mode(priv, cmd_ptr, cmd_action, + (uint16_t)cmd_oid, data_buf); + break; + case HostCmd_CMD_802_11_HS_CFG_ENH: + ret = mwifiex_cmd_802_11_hs_cfg(priv, cmd_ptr, cmd_action, + (struct mwifiex_hs_config_param *) data_buf); + break; + case HostCmd_CMD_802_11_SCAN: + ret = mwifiex_cmd_802_11_scan(priv, cmd_ptr, data_buf); + break; + case HostCmd_CMD_802_11_BG_SCAN_QUERY: + ret = mwifiex_cmd_802_11_bg_scan_query(priv, cmd_ptr, + data_buf); + break; + case HostCmd_CMD_802_11_ASSOCIATE: + ret = mwifiex_cmd_802_11_associate(priv, cmd_ptr, data_buf); + break; + case HostCmd_CMD_802_11_DEAUTHENTICATE: + ret = mwifiex_cmd_802_11_deauthenticate(priv, cmd_ptr, + data_buf); + break; + case HostCmd_CMD_802_11_AD_HOC_START: + ret = mwifiex_cmd_802_11_ad_hoc_start(priv, cmd_ptr, + data_buf); + break; + case HostCmd_CMD_802_11_GET_LOG: + ret = mwifiex_cmd_802_11_get_log(priv, cmd_ptr); + break; + case HostCmd_CMD_802_11_AD_HOC_JOIN: + ret = mwifiex_cmd_802_11_ad_hoc_join(priv, cmd_ptr, + data_buf); + break; + case HostCmd_CMD_802_11_AD_HOC_STOP: + ret = mwifiex_cmd_802_11_ad_hoc_stop(priv, cmd_ptr); + break; + case HostCmd_CMD_RSSI_INFO: + ret = mwifiex_cmd_802_11_rssi_info(priv, cmd_ptr, cmd_action); + break; + case HostCmd_CMD_802_11_SNMP_MIB: + ret = mwifiex_cmd_802_11_snmp_mib(priv, cmd_ptr, cmd_action, + cmd_oid, data_buf); + break; + case HostCmd_CMD_802_11_TX_RATE_QUERY: + cmd_ptr->command = + cpu_to_le16(HostCmd_CMD_802_11_TX_RATE_QUERY); + cmd_ptr->size = + cpu_to_le16(sizeof(struct host_cmd_ds_tx_rate_query) + + S_DS_GEN); + priv->tx_rate = 0; + ret = 0; + break; + case HostCmd_CMD_VERSION_EXT: + cmd_ptr->command = cpu_to_le16(cmd_no); + cmd_ptr->params.verext.version_str_sel = + (u8) (*((u32 *) data_buf)); + memcpy(&cmd_ptr->params, data_buf, + sizeof(struct host_cmd_ds_version_ext)); + cmd_ptr->size = + cpu_to_le16(sizeof(struct host_cmd_ds_version_ext) + + S_DS_GEN); + ret = 0; + break; + case HostCmd_CMD_802_11_RF_CHANNEL: + ret = mwifiex_cmd_802_11_rf_channel(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_FUNC_INIT: + if (priv->adapter->hw_status == MWIFIEX_HW_STATUS_RESET) + priv->adapter->hw_status = MWIFIEX_HW_STATUS_READY; + cmd_ptr->command = cpu_to_le16(cmd_no); + cmd_ptr->size = cpu_to_le16(S_DS_GEN); + break; + case HostCmd_CMD_FUNC_SHUTDOWN: + priv->adapter->hw_status = MWIFIEX_HW_STATUS_RESET; + cmd_ptr->command = cpu_to_le16(cmd_no); + cmd_ptr->size = cpu_to_le16(S_DS_GEN); + break; + case HostCmd_CMD_11N_ADDBA_REQ: + ret = mwifiex_cmd_11n_addba_req(priv, cmd_ptr, data_buf); + break; + case HostCmd_CMD_11N_DELBA: + ret = mwifiex_cmd_11n_delba(priv, cmd_ptr, data_buf); + break; + case HostCmd_CMD_11N_ADDBA_RSP: + ret = mwifiex_cmd_11n_addba_rsp_gen(priv, cmd_ptr, data_buf); + break; + case HostCmd_CMD_802_11_KEY_MATERIAL: + ret = mwifiex_cmd_802_11_key_material(priv, cmd_ptr, + cmd_action, cmd_oid, + data_buf); + break; + case HostCmd_CMD_802_11D_DOMAIN_INFO: + ret = mwifiex_cmd_802_11d_domain_info(priv, cmd_ptr, + cmd_action); + break; + case HostCmd_CMD_RECONFIGURE_TX_BUFF: + ret = mwifiex_cmd_recfg_tx_buf(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_AMSDU_AGGR_CTRL: + ret = mwifiex_cmd_amsdu_aggr_ctrl(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_11N_CFG: + ret = mwifiex_cmd_11n_cfg(priv, cmd_ptr, cmd_action, + data_buf); + break; + case HostCmd_CMD_WMM_GET_STATUS: + dev_dbg(priv->adapter->dev, + "cmd: WMM: WMM_GET_STATUS cmd sent\n"); + cmd_ptr->command = cpu_to_le16(HostCmd_CMD_WMM_GET_STATUS); + cmd_ptr->size = + cpu_to_le16(sizeof(struct host_cmd_ds_wmm_get_status) + + S_DS_GEN); + ret = 0; + break; + case HostCmd_CMD_802_11_IBSS_COALESCING_STATUS: + ret = mwifiex_cmd_ibss_coalescing_status(priv, cmd_ptr, + cmd_action, data_buf); + break; + case HostCmd_CMD_MAC_REG_ACCESS: + case HostCmd_CMD_BBP_REG_ACCESS: + case HostCmd_CMD_RF_REG_ACCESS: + case HostCmd_CMD_PMIC_REG_ACCESS: + case HostCmd_CMD_CAU_REG_ACCESS: + case HostCmd_CMD_802_11_EEPROM_ACCESS: + ret = mwifiex_cmd_reg_access(cmd_ptr, cmd_action, data_buf); + break; + case HostCmd_CMD_SET_BSS_MODE: + cmd_ptr->command = cpu_to_le16(cmd_no); + if (priv->bss_mode == NL80211_IFTYPE_ADHOC) + cmd_ptr->params.bss_mode.con_type = + CONNECTION_TYPE_ADHOC; + else if (priv->bss_mode == NL80211_IFTYPE_STATION) + cmd_ptr->params.bss_mode.con_type = + CONNECTION_TYPE_INFRA; + cmd_ptr->size = cpu_to_le16(sizeof(struct + host_cmd_ds_set_bss_mode) + S_DS_GEN); + ret = 0; + break; + default: + dev_err(priv->adapter->dev, + "PREP_CMD: unknown cmd- %#x\n", cmd_no); + ret = -1; + break; + } + return ret; +} + +/* + * This function issues commands to initialize firmware. + * + * This is called after firmware download to bring the card to + * working state. + * + * The following commands are issued sequentially - + * - Function init (for first interface only) + * - Read MAC address (for first interface only) + * - Reconfigure Tx buffer size (for first interface only) + * - Enable auto deep sleep (for first interface only) + * - Get Tx rate + * - Get Tx power + * - Set IBSS coalescing status + * - Set AMSDU aggregation control + * - Set 11d control + * - Set MAC control (this must be the last command to initialize firmware) + */ +int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta) +{ + int ret = 0; + u16 enable = true; + struct mwifiex_ds_11n_amsdu_aggr_ctrl amsdu_aggr_ctrl; + struct mwifiex_ds_auto_ds auto_ds; + enum state_11d_t state_11d; + + if (first_sta) { + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_FUNC_INIT, + HostCmd_ACT_GEN_SET, 0, NULL, NULL); + if (ret) + return -1; + /* Read MAC address from HW */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_GET_HW_SPEC, + HostCmd_ACT_GEN_GET, 0, NULL, NULL); + if (ret) + return -1; + + /* Reconfigure tx buf size */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_RECONFIGURE_TX_BUFF, + HostCmd_ACT_GEN_SET, 0, NULL, + &priv->adapter->tx_buf_size); + if (ret) + return -1; + + /* Enable IEEE PS by default */ + priv->adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP; + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH, + EN_AUTO_PS, BITMAP_STA_PS, NULL, + NULL); + if (ret) + return -1; + } + + /* get tx rate */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TX_RATE_CFG, + HostCmd_ACT_GEN_GET, 0, NULL, NULL); + if (ret) + return -1; + priv->data_rate = 0; + + /* get tx power */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TXPWR_CFG, + HostCmd_ACT_GEN_GET, 0, NULL, NULL); + if (ret) + return -1; + + /* set ibss coalescing_status */ + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_IBSS_COALESCING_STATUS, + HostCmd_ACT_GEN_SET, 0, NULL, &enable); + if (ret) + return -1; + + memset(&amsdu_aggr_ctrl, 0, sizeof(amsdu_aggr_ctrl)); + amsdu_aggr_ctrl.enable = true; + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_AMSDU_AGGR_CTRL, + HostCmd_ACT_GEN_SET, 0, NULL, + (void *) &amsdu_aggr_ctrl); + if (ret) + return -1; + /* MAC Control must be the last command in init_fw */ + /* set MAC Control */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL, + HostCmd_ACT_GEN_SET, 0, NULL, + &priv->curr_pkt_filter); + if (ret) + return -1; + + if (first_sta) { + /* Enable auto deep sleep */ + auto_ds.auto_ds = DEEP_SLEEP_ON; + auto_ds.idle_time = DEEP_SLEEP_IDLE_TIME; + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_PS_MODE_ENH, + EN_AUTO_PS, BITMAP_AUTO_DS, NULL, + &auto_ds); + if (ret) + return -1; + } + + /* Send cmd to FW to enable/disable 11D function */ + state_11d = ENABLE_11D; + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, + HostCmd_ACT_GEN_SET, DOT11D_I, + NULL, &state_11d); + if (ret) + dev_err(priv->adapter->dev, "11D: failed to enable 11D\n"); + + /* set last_init_cmd */ + priv->adapter->last_init_cmd = HostCmd_CMD_802_11_SNMP_MIB; + ret = -EINPROGRESS; + + return ret; +} diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c new file mode 100644 index 000000000000..74add45b99b6 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c @@ -0,0 +1,983 @@ +/* + * Marvell Wireless LAN device driver: station command response handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + + +/* + * This function handles the command response error case. + * + * For scan response error, the function cancels all the pending + * scan commands and generates an event to inform the applications + * of the scan completion. + * + * For Power Save command failure, we do not retry enter PS + * command in case of Ad-hoc mode. + * + * For all other response errors, the current command buffer is freed + * and returned to the free command queue. + */ +static void +mwifiex_process_cmdresp_error(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + struct mwifiex_wait_queue *wq_buf) +{ + struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL; + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_802_11_ps_mode_enh *pm; + unsigned long flags; + + dev_err(adapter->dev, "CMD_RESP: cmd %#x error, result=%#x\n", + resp->command, resp->result); + if (wq_buf) + wq_buf->status = MWIFIEX_ERROR_FW_CMDRESP; + + switch (le16_to_cpu(resp->command)) { + case HostCmd_CMD_802_11_PS_MODE_ENH: + pm = &resp->params.psmode_enh; + dev_err(adapter->dev, "PS_MODE_ENH cmd failed: " + "result=0x%x action=0x%X\n", + resp->result, le16_to_cpu(pm->action)); + /* We do not re-try enter-ps command in ad-hoc mode. */ + if (le16_to_cpu(pm->action) == EN_AUTO_PS && + (le16_to_cpu(pm->params.ps_bitmap) & BITMAP_STA_PS) && + priv->bss_mode == NL80211_IFTYPE_ADHOC) + adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM; + + break; + case HostCmd_CMD_802_11_SCAN: + /* Cancel all pending scan command */ + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + list_for_each_entry_safe(cmd_node, tmp_node, + &adapter->scan_pending_q, list) { + list_del(&cmd_node->list); + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, + flags); + mwifiex_insert_cmd_to_free_q(adapter, cmd_node); + spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); + } + spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->scan_processing = false; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + if (priv->report_scan_result) + priv->report_scan_result = false; + if (priv->scan_pending_on_block) { + priv->scan_pending_on_block = false; + up(&priv->async_sem); + } + break; + + case HostCmd_CMD_MAC_CONTROL: + break; + + default: + break; + } + /* Handling errors here */ + mwifiex_insert_cmd_to_free_q(adapter, adapter->curr_cmd); + + spin_lock_irqsave(&adapter->mwifiex_cmd_lock, flags); + adapter->curr_cmd = NULL; + spin_unlock_irqrestore(&adapter->mwifiex_cmd_lock, flags); + + return; +} + +/* + * This function handles the command response of get RSSI info. + * + * Handling includes changing the header fields into CPU format + * and saving the following parameters in driver - + * - Last data and beacon RSSI value + * - Average data and beacon RSSI value + * - Last data and beacon NF value + * - Average data and beacon NF value + * + * The parameters are send to the application as well, along with + * calculated SNR values. + */ +static int mwifiex_ret_802_11_rssi_info(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct host_cmd_ds_802_11_rssi_info_rsp *rssi_info_rsp = + &resp->params.rssi_info_rsp; + struct mwifiex_ds_get_signal *signal = NULL; + + priv->data_rssi_last = le16_to_cpu(rssi_info_rsp->data_rssi_last); + priv->data_nf_last = le16_to_cpu(rssi_info_rsp->data_nf_last); + + priv->data_rssi_avg = le16_to_cpu(rssi_info_rsp->data_rssi_avg); + priv->data_nf_avg = le16_to_cpu(rssi_info_rsp->data_nf_avg); + + priv->bcn_rssi_last = le16_to_cpu(rssi_info_rsp->bcn_rssi_last); + priv->bcn_nf_last = le16_to_cpu(rssi_info_rsp->bcn_nf_last); + + priv->bcn_rssi_avg = le16_to_cpu(rssi_info_rsp->bcn_rssi_avg); + priv->bcn_nf_avg = le16_to_cpu(rssi_info_rsp->bcn_nf_avg); + + /* Need to indicate IOCTL complete */ + if (data_buf) { + signal = (struct mwifiex_ds_get_signal *) data_buf; + memset(signal, 0, sizeof(struct mwifiex_ds_get_signal)); + + signal->selector = ALL_RSSI_INFO_MASK; + + /* RSSI */ + signal->bcn_rssi_last = priv->bcn_rssi_last; + signal->bcn_rssi_avg = priv->bcn_rssi_avg; + signal->data_rssi_last = priv->data_rssi_last; + signal->data_rssi_avg = priv->data_rssi_avg; + + /* SNR */ + signal->bcn_snr_last = + CAL_SNR(priv->bcn_rssi_last, priv->bcn_nf_last); + signal->bcn_snr_avg = + CAL_SNR(priv->bcn_rssi_avg, priv->bcn_nf_avg); + signal->data_snr_last = + CAL_SNR(priv->data_rssi_last, priv->data_nf_last); + signal->data_snr_avg = + CAL_SNR(priv->data_rssi_avg, priv->data_nf_avg); + + /* NF */ + signal->bcn_nf_last = priv->bcn_nf_last; + signal->bcn_nf_avg = priv->bcn_nf_avg; + signal->data_nf_last = priv->data_nf_last; + signal->data_nf_avg = priv->data_nf_avg; + } + + return 0; +} + +/* + * This function handles the command response of set/get SNMP + * MIB parameters. + * + * Handling includes changing the header fields into CPU format + * and saving the parameter in driver. + * + * The following parameters are supported - + * - Fragmentation threshold + * - RTS threshold + * - Short retry limit + */ +static int mwifiex_ret_802_11_snmp_mib(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct host_cmd_ds_802_11_snmp_mib *smib = &resp->params.smib; + u16 oid = le16_to_cpu(smib->oid); + u16 query_type = le16_to_cpu(smib->query_type); + u32 ul_temp; + + dev_dbg(priv->adapter->dev, "info: SNMP_RESP: oid value = %#x," + " query_type = %#x, buf size = %#x\n", + oid, query_type, le16_to_cpu(smib->buf_size)); + if (query_type == HostCmd_ACT_GEN_GET) { + ul_temp = le16_to_cpu(*((__le16 *) (smib->value))); + if (data_buf) + *(u32 *)data_buf = ul_temp; + switch (oid) { + case FRAG_THRESH_I: + dev_dbg(priv->adapter->dev, + "info: SNMP_RESP: FragThsd =%u\n", ul_temp); + break; + case RTS_THRESH_I: + dev_dbg(priv->adapter->dev, + "info: SNMP_RESP: RTSThsd =%u\n", ul_temp); + break; + case SHORT_RETRY_LIM_I: + dev_dbg(priv->adapter->dev, + "info: SNMP_RESP: TxRetryCount=%u\n", ul_temp); + break; + default: + break; + } + } + + return 0; +} + +/* + * This function handles the command response of get log request + * + * Handling includes changing the header fields into CPU format + * and sending the received parameters to application. + */ +static int mwifiex_ret_get_log(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct host_cmd_ds_802_11_get_log *get_log = + (struct host_cmd_ds_802_11_get_log *) &resp->params.get_log; + struct mwifiex_ds_get_stats *stats = NULL; + + if (data_buf) { + stats = (struct mwifiex_ds_get_stats *) data_buf; + stats->mcast_tx_frame = le32_to_cpu(get_log->mcast_tx_frame); + stats->failed = le32_to_cpu(get_log->failed); + stats->retry = le32_to_cpu(get_log->retry); + stats->multi_retry = le32_to_cpu(get_log->multi_retry); + stats->frame_dup = le32_to_cpu(get_log->frame_dup); + stats->rts_success = le32_to_cpu(get_log->rts_success); + stats->rts_failure = le32_to_cpu(get_log->rts_failure); + stats->ack_failure = le32_to_cpu(get_log->ack_failure); + stats->rx_frag = le32_to_cpu(get_log->rx_frag); + stats->mcast_rx_frame = le32_to_cpu(get_log->mcast_rx_frame); + stats->fcs_error = le32_to_cpu(get_log->fcs_error); + stats->tx_frame = le32_to_cpu(get_log->tx_frame); + stats->wep_icv_error[0] = + le32_to_cpu(get_log->wep_icv_err_cnt[0]); + stats->wep_icv_error[1] = + le32_to_cpu(get_log->wep_icv_err_cnt[1]); + stats->wep_icv_error[2] = + le32_to_cpu(get_log->wep_icv_err_cnt[2]); + stats->wep_icv_error[3] = + le32_to_cpu(get_log->wep_icv_err_cnt[3]); + } + + return 0; +} + +/* + * This function handles the command response of set/get Tx rate + * configurations. + * + * Handling includes changing the header fields into CPU format + * and saving the following parameters in driver - + * - DSSS rate bitmap + * - OFDM rate bitmap + * - HT MCS rate bitmaps + * + * Based on the new rate bitmaps, the function re-evaluates if + * auto data rate has been activated. If not, it sends another + * query to the firmware to get the current Tx data rate and updates + * the driver value. + */ +static int mwifiex_ret_tx_rate_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_rate_cfg *ds_rate = NULL; + struct host_cmd_ds_tx_rate_cfg *rate_cfg = &resp->params.tx_rate_cfg; + struct mwifiex_rate_scope *rate_scope; + struct mwifiex_ie_types_header *head = NULL; + u16 tlv, tlv_buf_len; + u8 *tlv_buf; + u32 i; + int ret = 0; + + tlv_buf = (u8 *) ((u8 *) rate_cfg) + + sizeof(struct host_cmd_ds_tx_rate_cfg); + tlv_buf_len = *(u16 *) (tlv_buf + sizeof(u16)); + + while (tlv_buf && tlv_buf_len > 0) { + tlv = (*tlv_buf); + tlv = tlv | (*(tlv_buf + 1) << 8); + + switch (tlv) { + case TLV_TYPE_RATE_SCOPE: + rate_scope = (struct mwifiex_rate_scope *) tlv_buf; + priv->bitmap_rates[0] = + le16_to_cpu(rate_scope->hr_dsss_rate_bitmap); + priv->bitmap_rates[1] = + le16_to_cpu(rate_scope->ofdm_rate_bitmap); + for (i = 0; + i < + sizeof(rate_scope->ht_mcs_rate_bitmap) / + sizeof(u16); i++) + priv->bitmap_rates[2 + i] = + le16_to_cpu(rate_scope-> + ht_mcs_rate_bitmap[i]); + break; + /* Add RATE_DROP tlv here */ + } + + head = (struct mwifiex_ie_types_header *) tlv_buf; + tlv_buf += le16_to_cpu(head->len) + sizeof(*head); + tlv_buf_len -= le16_to_cpu(head->len); + } + + priv->is_data_rate_auto = mwifiex_is_rate_auto(priv); + + if (priv->is_data_rate_auto) + priv->data_rate = 0; + else + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_TX_RATE_QUERY, + HostCmd_ACT_GEN_GET, 0, NULL, NULL); + + if (data_buf) { + ds_rate = (struct mwifiex_rate_cfg *) data_buf; + if (le16_to_cpu(rate_cfg->action) == HostCmd_ACT_GEN_GET) { + if (priv->is_data_rate_auto) { + ds_rate->is_rate_auto = 1; + } else { + ds_rate->rate = + mwifiex_get_rate_index(adapter, + priv-> + bitmap_rates, + sizeof(priv-> + bitmap_rates)); + if (ds_rate->rate >= + MWIFIEX_RATE_BITMAP_OFDM0 + && ds_rate->rate <= + MWIFIEX_RATE_BITMAP_OFDM7) + ds_rate->rate -= + (MWIFIEX_RATE_BITMAP_OFDM0 - + MWIFIEX_RATE_INDEX_OFDM0); + if (ds_rate->rate >= + MWIFIEX_RATE_BITMAP_MCS0 + && ds_rate->rate <= + MWIFIEX_RATE_BITMAP_MCS127) + ds_rate->rate -= + (MWIFIEX_RATE_BITMAP_MCS0 - + MWIFIEX_RATE_INDEX_MCS0); + } + } + } + + return ret; +} + +/* + * This function handles the command response of get Tx power level. + * + * Handling includes saving the maximum and minimum Tx power levels + * in driver, as well as sending the values to user. + */ +static int mwifiex_get_power_level(struct mwifiex_private *priv, void *data_buf) +{ + int length = -1, max_power = -1, min_power = -1; + struct mwifiex_types_power_group *pg_tlv_hdr = NULL; + struct mwifiex_power_group *pg = NULL; + + if (data_buf) { + pg_tlv_hdr = + (struct mwifiex_types_power_group *) ((u8 *) data_buf + + sizeof(struct host_cmd_ds_txpwr_cfg)); + pg = (struct mwifiex_power_group *) ((u8 *) pg_tlv_hdr + + sizeof(struct mwifiex_types_power_group)); + length = pg_tlv_hdr->length; + if (length > 0) { + max_power = pg->power_max; + min_power = pg->power_min; + length -= sizeof(struct mwifiex_power_group); + } + while (length) { + pg++; + if (max_power < pg->power_max) + max_power = pg->power_max; + + if (min_power > pg->power_min) + min_power = pg->power_min; + + length -= sizeof(struct mwifiex_power_group); + } + if (pg_tlv_hdr->length > 0) { + priv->min_tx_power_level = (u8) min_power; + priv->max_tx_power_level = (u8) max_power; + } + } else { + return -1; + } + + return 0; +} + +/* + * This function handles the command response of set/get Tx power + * configurations. + * + * Handling includes changing the header fields into CPU format + * and saving the current Tx power level in driver. + */ +static int mwifiex_ret_tx_power_cfg(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_txpwr_cfg *txp_cfg = &resp->params.txp_cfg; + struct mwifiex_types_power_group *pg_tlv_hdr = NULL; + struct mwifiex_power_group *pg = NULL; + u16 action = le16_to_cpu(txp_cfg->action); + + switch (action) { + case HostCmd_ACT_GEN_GET: + { + pg_tlv_hdr = + (struct mwifiex_types_power_group *) ((u8 *) + txp_cfg + + sizeof + (struct + host_cmd_ds_txpwr_cfg)); + pg = (struct mwifiex_power_group *) ((u8 *) + pg_tlv_hdr + + sizeof(struct + mwifiex_types_power_group)); + if (adapter->hw_status == + MWIFIEX_HW_STATUS_INITIALIZING) + mwifiex_get_power_level(priv, txp_cfg); + priv->tx_power_level = (u16) pg->power_min; + break; + } + case HostCmd_ACT_GEN_SET: + if (le32_to_cpu(txp_cfg->mode)) { + pg_tlv_hdr = + (struct mwifiex_types_power_group *) ((u8 *) + txp_cfg + + sizeof + (struct + host_cmd_ds_txpwr_cfg)); + pg = (struct mwifiex_power_group *) ((u8 *) pg_tlv_hdr + + + sizeof(struct + mwifiex_types_power_group)); + if (pg->power_max == pg->power_min) + priv->tx_power_level = (u16) pg->power_min; + } + break; + default: + dev_err(adapter->dev, "CMD_RESP: unknown cmd action %d\n", + action); + return 0; + } + dev_dbg(adapter->dev, + "info: Current TxPower Level = %d, Max Power=%d, Min Power=%d\n", + priv->tx_power_level, priv->max_tx_power_level, + priv->min_tx_power_level); + + return 0; +} + +/* + * This function handles the command response of set/get MAC address. + * + * Handling includes saving the MAC address in driver. + */ +static int mwifiex_ret_802_11_mac_address(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct host_cmd_ds_802_11_mac_address *cmd_mac_addr = + &resp->params.mac_addr; + + memcpy(priv->curr_addr, cmd_mac_addr->mac_addr, ETH_ALEN); + + dev_dbg(priv->adapter->dev, + "info: set mac address: %pM\n", priv->curr_addr); + + return 0; +} + +/* + * This function handles the command response of set/get MAC multicast + * address. + */ +static int mwifiex_ret_mac_multicast_adr(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + return 0; +} + +/* + * This function handles the command response of get Tx rate query. + * + * Handling includes changing the header fields into CPU format + * and saving the Tx rate and HT information parameters in driver. + * + * Both rate configuration and current data rate can be retrieved + * with this request. + */ +static int mwifiex_ret_802_11_tx_rate_query(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + priv->tx_rate = resp->params.tx_rate.tx_rate; + priv->tx_htinfo = resp->params.tx_rate.ht_info; + if (!priv->is_data_rate_auto) + priv->data_rate = + mwifiex_index_to_data_rate(adapter, priv->tx_rate, + priv->tx_htinfo); + + return 0; +} + +/* + * This function handles the command response of a deauthenticate + * command. + * + * If the deauthenticated MAC matches the current BSS MAC, the connection + * state is reset. + */ +static int mwifiex_ret_802_11_deauthenticate(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + adapter->dbg.num_cmd_deauth++; + if (!memcmp(resp->params.deauth.mac_addr, + &priv->curr_bss_params.bss_descriptor.mac_address, + sizeof(resp->params.deauth.mac_addr))) + mwifiex_reset_connect_state(priv); + + return 0; +} + +/* + * This function handles the command response of ad-hoc stop. + * + * The function resets the connection state in driver. + */ +static int mwifiex_ret_802_11_ad_hoc_stop(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + mwifiex_reset_connect_state(priv); + return 0; +} + +/* + * This function handles the command response of set/get key material. + * + * Handling includes updating the driver parameters to reflect the + * changes. + */ +static int mwifiex_ret_802_11_key_material(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct host_cmd_ds_802_11_key_material *key = + &resp->params.key_material; + + if (le16_to_cpu(key->action) == HostCmd_ACT_GEN_SET) { + if ((le16_to_cpu(key->key_param_set.key_info) & + KEY_INFO_TKIP_MCAST)) { + dev_dbg(priv->adapter->dev, "info: key: GTK is set\n"); + priv->wpa_is_gtk_set = true; + priv->scan_block = false; + } + } + + memset(priv->aes_key.key_param_set.key, 0, + sizeof(key->key_param_set.key)); + priv->aes_key.key_param_set.key_len = key->key_param_set.key_len; + memcpy(priv->aes_key.key_param_set.key, key->key_param_set.key, + le16_to_cpu(priv->aes_key.key_param_set.key_len)); + + return 0; +} + +/* + * This function handles the command response of get 11d domain information. + */ +static int mwifiex_ret_802_11d_domain_info(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct host_cmd_ds_802_11d_domain_info_rsp *domain_info = + &resp->params.domain_info_resp; + struct mwifiex_ietypes_domain_param_set *domain = &domain_info->domain; + u16 action = le16_to_cpu(domain_info->action); + u8 no_of_triplet = 0; + + no_of_triplet = (u8) ((le16_to_cpu(domain->header.len) - + IEEE80211_COUNTRY_STRING_LEN) / + sizeof(struct ieee80211_country_ie_triplet)); + + dev_dbg(priv->adapter->dev, "info: 11D Domain Info Resp:" + " no_of_triplet=%d\n", no_of_triplet); + + if (no_of_triplet > MWIFIEX_MAX_TRIPLET_802_11D) { + dev_warn(priv->adapter->dev, + "11D: invalid number of triplets %d " + "returned!!\n", no_of_triplet); + return -1; + } + + switch (action) { + case HostCmd_ACT_GEN_SET: /* Proc Set Action */ + break; + case HostCmd_ACT_GEN_GET: + break; + default: + dev_err(priv->adapter->dev, + "11D: invalid action:%d\n", domain_info->action); + return -1; + } + + return 0; +} + +/* + * This function handles the command response of get RF channel. + * + * Handling includes changing the header fields into CPU format + * and saving the new channel in driver. + */ +static int mwifiex_ret_802_11_rf_channel(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct host_cmd_ds_802_11_rf_channel *rf_channel = + &resp->params.rf_channel; + u16 new_channel = le16_to_cpu(rf_channel->current_channel); + + if (priv->curr_bss_params.bss_descriptor.channel != new_channel) { + dev_dbg(priv->adapter->dev, "cmd: Channel Switch: %d to %d\n", + priv->curr_bss_params.bss_descriptor.channel, + new_channel); + /* Update the channel again */ + priv->curr_bss_params.bss_descriptor.channel = new_channel; + } + if (data_buf) + *((u16 *)data_buf) = new_channel; + + return 0; +} + +/* + * This function handles the command response of get extended version. + * + * Handling includes forming the extended version string and sending it + * to application. + */ +static int mwifiex_ret_ver_ext(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct host_cmd_ds_version_ext *ver_ext = &resp->params.verext; + struct host_cmd_ds_version_ext *version_ext = NULL; + + if (data_buf) { + version_ext = (struct host_cmd_ds_version_ext *)data_buf; + version_ext->version_str_sel = ver_ext->version_str_sel; + memcpy(version_ext->version_str, ver_ext->version_str, + sizeof(char) * 128); + memcpy(priv->version_str, ver_ext->version_str, 128); + } + return 0; +} + +/* + * This function handles the command response of register access. + * + * The register value and offset are returned to the user. For EEPROM + * access, the byte count is also returned. + */ +static int mwifiex_ret_reg_access(u16 type, struct host_cmd_ds_command *resp, + void *data_buf) +{ + struct mwifiex_ds_reg_rw *reg_rw = NULL; + struct mwifiex_ds_read_eeprom *eeprom = NULL; + + if (data_buf) { + reg_rw = (struct mwifiex_ds_reg_rw *) data_buf; + eeprom = (struct mwifiex_ds_read_eeprom *) data_buf; + switch (type) { + case HostCmd_CMD_MAC_REG_ACCESS: + { + struct host_cmd_ds_mac_reg_access *reg; + reg = (struct host_cmd_ds_mac_reg_access *) + &resp->params.mac_reg; + reg_rw->offset = cpu_to_le32( + (u32) le16_to_cpu(reg->offset)); + reg_rw->value = reg->value; + break; + } + case HostCmd_CMD_BBP_REG_ACCESS: + { + struct host_cmd_ds_bbp_reg_access *reg; + reg = (struct host_cmd_ds_bbp_reg_access *) + &resp->params.bbp_reg; + reg_rw->offset = cpu_to_le32( + (u32) le16_to_cpu(reg->offset)); + reg_rw->value = cpu_to_le32((u32) reg->value); + break; + } + + case HostCmd_CMD_RF_REG_ACCESS: + { + struct host_cmd_ds_rf_reg_access *reg; + reg = (struct host_cmd_ds_rf_reg_access *) + &resp->params.rf_reg; + reg_rw->offset = cpu_to_le32( + (u32) le16_to_cpu(reg->offset)); + reg_rw->value = cpu_to_le32((u32) reg->value); + break; + } + case HostCmd_CMD_PMIC_REG_ACCESS: + { + struct host_cmd_ds_pmic_reg_access *reg; + reg = (struct host_cmd_ds_pmic_reg_access *) + &resp->params.pmic_reg; + reg_rw->offset = cpu_to_le32( + (u32) le16_to_cpu(reg->offset)); + reg_rw->value = cpu_to_le32((u32) reg->value); + break; + } + case HostCmd_CMD_CAU_REG_ACCESS: + { + struct host_cmd_ds_rf_reg_access *reg; + reg = (struct host_cmd_ds_rf_reg_access *) + &resp->params.rf_reg; + reg_rw->offset = cpu_to_le32( + (u32) le16_to_cpu(reg->offset)); + reg_rw->value = cpu_to_le32((u32) reg->value); + break; + } + case HostCmd_CMD_802_11_EEPROM_ACCESS: + { + struct host_cmd_ds_802_11_eeprom_access + *cmd_eeprom = + (struct host_cmd_ds_802_11_eeprom_access + *) &resp->params.eeprom; + pr_debug("info: EEPROM read len=%x\n", + cmd_eeprom->byte_count); + if (le16_to_cpu(eeprom->byte_count) < + le16_to_cpu( + cmd_eeprom->byte_count)) { + eeprom->byte_count = cpu_to_le16(0); + pr_debug("info: EEPROM read " + "length is too big\n"); + return -1; + } + eeprom->offset = cmd_eeprom->offset; + eeprom->byte_count = cmd_eeprom->byte_count; + if (le16_to_cpu(eeprom->byte_count) > 0) + memcpy(&eeprom->value, + &cmd_eeprom->value, + le16_to_cpu(eeprom->byte_count)); + + break; + } + default: + return -1; + } + } + return 0; +} + +/* + * This function handles the command response of get IBSS coalescing status. + * + * If the received BSSID is different than the current one, the current BSSID, + * beacon interval, ATIM window and ERP information are updated, along with + * changing the ad-hoc state accordingly. + */ +static int mwifiex_ret_ibss_coalescing_status(struct mwifiex_private *priv, + struct host_cmd_ds_command *resp) +{ + struct host_cmd_ds_802_11_ibss_status *ibss_coal_resp = + &(resp->params.ibss_coalescing); + u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 }; + + if (le16_to_cpu(ibss_coal_resp->action) == HostCmd_ACT_GEN_SET) + return 0; + + dev_dbg(priv->adapter->dev, + "info: new BSSID %pM\n", ibss_coal_resp->bssid); + + /* If rsp has NULL BSSID, Just return..... No Action */ + if (!memcmp(ibss_coal_resp->bssid, zero_mac, ETH_ALEN)) { + dev_warn(priv->adapter->dev, "new BSSID is NULL\n"); + return 0; + } + + /* If BSSID is diff, modify current BSS parameters */ + if (memcmp(priv->curr_bss_params.bss_descriptor.mac_address, + ibss_coal_resp->bssid, ETH_ALEN)) { + /* BSSID */ + memcpy(priv->curr_bss_params.bss_descriptor.mac_address, + ibss_coal_resp->bssid, ETH_ALEN); + + /* Beacon Interval */ + priv->curr_bss_params.bss_descriptor.beacon_period + = le16_to_cpu(ibss_coal_resp->beacon_interval); + + /* ERP Information */ + priv->curr_bss_params.bss_descriptor.erp_flags = + (u8) le16_to_cpu(ibss_coal_resp->use_g_rate_protect); + + priv->adhoc_state = ADHOC_COALESCED; + } + + return 0; +} + +/* + * This function handles the command responses. + * + * This is a generic function, which calls command specific + * response handlers based on the command ID. + */ +int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, + u16 cmdresp_no, void *cmd_buf, void *wq_buf) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + struct host_cmd_ds_command *resp = + (struct host_cmd_ds_command *) cmd_buf; + struct mwifiex_wait_queue *wait_queue = + (struct mwifiex_wait_queue *) wq_buf; + void *data_buf = adapter->curr_cmd->data_buf; + + /* If the command is not successful, cleanup and return failure */ + if (resp->result != HostCmd_RESULT_OK) { + mwifiex_process_cmdresp_error(priv, resp, wait_queue); + return -1; + } + /* Command successful, handle response */ + switch (cmdresp_no) { + case HostCmd_CMD_GET_HW_SPEC: + ret = mwifiex_ret_get_hw_spec(priv, resp); + break; + case HostCmd_CMD_MAC_CONTROL: + break; + case HostCmd_CMD_802_11_MAC_ADDRESS: + ret = mwifiex_ret_802_11_mac_address(priv, resp); + break; + case HostCmd_CMD_MAC_MULTICAST_ADR: + ret = mwifiex_ret_mac_multicast_adr(priv, resp); + break; + case HostCmd_CMD_TX_RATE_CFG: + ret = mwifiex_ret_tx_rate_cfg(priv, resp, data_buf); + break; + case HostCmd_CMD_802_11_SCAN: + ret = mwifiex_ret_802_11_scan(priv, resp, wait_queue); + wait_queue = NULL; + adapter->curr_cmd->wq_buf = NULL; + break; + case HostCmd_CMD_802_11_BG_SCAN_QUERY: + ret = mwifiex_ret_802_11_scan(priv, resp, wait_queue); + dev_dbg(adapter->dev, + "info: CMD_RESP: BG_SCAN result is ready!\n"); + break; + case HostCmd_CMD_TXPWR_CFG: + ret = mwifiex_ret_tx_power_cfg(priv, resp, data_buf); + break; + case HostCmd_CMD_802_11_PS_MODE_ENH: + ret = mwifiex_ret_enh_power_mode(priv, resp, data_buf); + break; + case HostCmd_CMD_802_11_HS_CFG_ENH: + ret = mwifiex_ret_802_11_hs_cfg(priv, resp); + break; + case HostCmd_CMD_802_11_ASSOCIATE: + ret = mwifiex_ret_802_11_associate(priv, resp, wait_queue); + break; + case HostCmd_CMD_802_11_DEAUTHENTICATE: + ret = mwifiex_ret_802_11_deauthenticate(priv, resp); + break; + case HostCmd_CMD_802_11_AD_HOC_START: + case HostCmd_CMD_802_11_AD_HOC_JOIN: + ret = mwifiex_ret_802_11_ad_hoc(priv, resp, wait_queue); + break; + case HostCmd_CMD_802_11_AD_HOC_STOP: + ret = mwifiex_ret_802_11_ad_hoc_stop(priv, resp); + break; + case HostCmd_CMD_802_11_GET_LOG: + ret = mwifiex_ret_get_log(priv, resp, data_buf); + break; + case HostCmd_CMD_RSSI_INFO: + ret = mwifiex_ret_802_11_rssi_info(priv, resp, data_buf); + break; + case HostCmd_CMD_802_11_SNMP_MIB: + ret = mwifiex_ret_802_11_snmp_mib(priv, resp, data_buf); + break; + case HostCmd_CMD_802_11_TX_RATE_QUERY: + ret = mwifiex_ret_802_11_tx_rate_query(priv, resp); + break; + case HostCmd_CMD_802_11_RF_CHANNEL: + ret = mwifiex_ret_802_11_rf_channel(priv, resp, data_buf); + break; + case HostCmd_CMD_VERSION_EXT: + ret = mwifiex_ret_ver_ext(priv, resp, data_buf); + break; + case HostCmd_CMD_FUNC_INIT: + case HostCmd_CMD_FUNC_SHUTDOWN: + break; + case HostCmd_CMD_802_11_KEY_MATERIAL: + ret = mwifiex_ret_802_11_key_material(priv, resp); + break; + case HostCmd_CMD_802_11D_DOMAIN_INFO: + ret = mwifiex_ret_802_11d_domain_info(priv, resp); + break; + case HostCmd_CMD_11N_ADDBA_REQ: + ret = mwifiex_ret_11n_addba_req(priv, resp); + break; + case HostCmd_CMD_11N_DELBA: + ret = mwifiex_ret_11n_delba(priv, resp); + break; + case HostCmd_CMD_11N_ADDBA_RSP: + ret = mwifiex_ret_11n_addba_resp(priv, resp); + break; + case HostCmd_CMD_RECONFIGURE_TX_BUFF: + adapter->tx_buf_size = (u16) le16_to_cpu(resp->params. + tx_buf.buff_size); + adapter->tx_buf_size = (adapter->tx_buf_size / + MWIFIEX_SDIO_BLOCK_SIZE) * + MWIFIEX_SDIO_BLOCK_SIZE; + adapter->curr_tx_buf_size = adapter->tx_buf_size; + dev_dbg(adapter->dev, + "cmd: max_tx_buf_size=%d, tx_buf_size=%d\n", + adapter->max_tx_buf_size, adapter->tx_buf_size); + + if (adapter->if_ops.update_mp_end_port) + adapter->if_ops.update_mp_end_port(adapter, + le16_to_cpu(resp-> + params. + tx_buf. + mp_end_port)); + break; + case HostCmd_CMD_AMSDU_AGGR_CTRL: + ret = mwifiex_ret_amsdu_aggr_ctrl(priv, resp, data_buf); + break; + case HostCmd_CMD_WMM_GET_STATUS: + ret = mwifiex_ret_wmm_get_status(priv, resp); + break; + case HostCmd_CMD_802_11_IBSS_COALESCING_STATUS: + ret = mwifiex_ret_ibss_coalescing_status(priv, resp); + break; + case HostCmd_CMD_MAC_REG_ACCESS: + case HostCmd_CMD_BBP_REG_ACCESS: + case HostCmd_CMD_RF_REG_ACCESS: + case HostCmd_CMD_PMIC_REG_ACCESS: + case HostCmd_CMD_CAU_REG_ACCESS: + case HostCmd_CMD_802_11_EEPROM_ACCESS: + ret = mwifiex_ret_reg_access(cmdresp_no, resp, data_buf); + break; + case HostCmd_CMD_SET_BSS_MODE: + break; + case HostCmd_CMD_11N_CFG: + ret = mwifiex_ret_11n_cfg(priv, resp, data_buf); + break; + default: + dev_err(adapter->dev, "CMD_RESP: unknown cmd response %#x\n", + resp->command); + break; + } + + return ret; +} diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c new file mode 100644 index 000000000000..936d7c175e75 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_event.c @@ -0,0 +1,405 @@ +/* + * Marvell Wireless LAN device driver: station event handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +/* + * This function resets the connection state. + * + * The function is invoked after receiving a disconnect event from firmware, + * and performs the following actions - + * - Set media status to disconnected + * - Clean up Tx and Rx packets + * - Resets SNR/NF/RSSI value in driver + * - Resets security configurations in driver + * - Enables auto data rate + * - Saves the previous SSID and BSSID so that they can + * be used for re-association, if required + * - Erases current SSID and BSSID information + * - Sends a disconnect event to upper layers/applications. + */ +void +mwifiex_reset_connect_state(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + if (!priv->media_connected) + return; + + dev_dbg(adapter->dev, "info: handles disconnect event\n"); + + priv->media_connected = false; + + priv->scan_block = false; + + /* Free Tx and Rx packets, report disconnect to upper layer */ + mwifiex_clean_txrx(priv); + + /* Reset SNR/NF/RSSI values */ + priv->data_rssi_last = 0; + priv->data_nf_last = 0; + priv->data_rssi_avg = 0; + priv->data_nf_avg = 0; + priv->bcn_rssi_last = 0; + priv->bcn_nf_last = 0; + priv->bcn_rssi_avg = 0; + priv->bcn_nf_avg = 0; + priv->rxpd_rate = 0; + priv->rxpd_htinfo = 0; + priv->sec_info.wpa_enabled = false; + priv->sec_info.wpa2_enabled = false; + priv->wpa_ie_len = 0; + + priv->sec_info.wapi_enabled = false; + priv->wapi_ie_len = 0; + priv->sec_info.wapi_key_on = false; + + priv->sec_info.encryption_mode = 0; + + /* Enable auto data rate */ + priv->is_data_rate_auto = true; + priv->data_rate = 0; + + if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + priv->adhoc_state = ADHOC_IDLE; + priv->adhoc_is_link_sensed = false; + } + + /* + * Memorize the previous SSID and BSSID so + * it could be used for re-assoc + */ + + dev_dbg(adapter->dev, "info: previous SSID=%s, SSID len=%u\n", + priv->prev_ssid.ssid, priv->prev_ssid.ssid_len); + + dev_dbg(adapter->dev, "info: current SSID=%s, SSID len=%u\n", + priv->curr_bss_params.bss_descriptor.ssid.ssid, + priv->curr_bss_params.bss_descriptor.ssid.ssid_len); + + memcpy(&priv->prev_ssid, + &priv->curr_bss_params.bss_descriptor.ssid, + sizeof(struct mwifiex_802_11_ssid)); + + memcpy(priv->prev_bssid, + priv->curr_bss_params.bss_descriptor.mac_address, ETH_ALEN); + + /* Need to erase the current SSID and BSSID info */ + memset(&priv->curr_bss_params, 0x00, sizeof(priv->curr_bss_params)); + + adapter->tx_lock_flag = false; + adapter->pps_uapsd_mode = false; + + if (adapter->num_cmd_timeout && adapter->curr_cmd) + return; + priv->media_connected = false; + if (!priv->disconnect) { + priv->disconnect = 1; + dev_dbg(adapter->dev, "info: successfully disconnected from" + " %pM: reason code %d\n", priv->cfg_bssid, + WLAN_REASON_DEAUTH_LEAVING); + cfg80211_disconnected(priv->netdev, + WLAN_REASON_DEAUTH_LEAVING, NULL, 0, + GFP_KERNEL); + queue_work(priv->workqueue, &priv->cfg_workqueue); + } + if (!netif_queue_stopped(priv->netdev)) + netif_stop_queue(priv->netdev); + if (netif_carrier_ok(priv->netdev)) + netif_carrier_off(priv->netdev); + /* Reset wireless stats signal info */ + priv->w_stats.qual.level = 0; + priv->w_stats.qual.noise = 0; +} + +/* + * This function handles events generated by firmware. + * + * This is a generic function and handles all events. + * + * Event specific routines are called by this function based + * upon the generated event cause. + * + * For the following events, the function just forwards them to upper + * layers, optionally recording the change - + * - EVENT_LINK_SENSED + * - EVENT_MIC_ERR_UNICAST + * - EVENT_MIC_ERR_MULTICAST + * - EVENT_PORT_RELEASE + * - EVENT_RSSI_LOW + * - EVENT_SNR_LOW + * - EVENT_MAX_FAIL + * - EVENT_RSSI_HIGH + * - EVENT_SNR_HIGH + * - EVENT_DATA_RSSI_LOW + * - EVENT_DATA_SNR_LOW + * - EVENT_DATA_RSSI_HIGH + * - EVENT_DATA_SNR_HIGH + * - EVENT_LINK_QUALITY + * - EVENT_PRE_BEACON_LOST + * - EVENT_IBSS_COALESCED + * - EVENT_WEP_ICV_ERR + * - EVENT_BW_CHANGE + * - EVENT_HOSTWAKE_STAIE + * + * For the following events, no action is taken - + * - EVENT_MIB_CHANGED + * - EVENT_INIT_DONE + * - EVENT_DUMMY_HOST_WAKEUP_SIGNAL + * + * Rest of the supported events requires driver handling - + * - EVENT_DEAUTHENTICATED + * - EVENT_DISASSOCIATED + * - EVENT_LINK_LOST + * - EVENT_PS_SLEEP + * - EVENT_PS_AWAKE + * - EVENT_DEEP_SLEEP_AWAKE + * - EVENT_HS_ACT_REQ + * - EVENT_ADHOC_BCN_LOST + * - EVENT_BG_SCAN_REPORT + * - EVENT_WMM_STATUS_CHANGE + * - EVENT_ADDBA + * - EVENT_DELBA + * - EVENT_BA_STREAM_TIEMOUT + * - EVENT_AMSDU_AGGR_CTRL + */ +int mwifiex_process_sta_event(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + int ret = 0; + u32 eventcause = adapter->event_cause; + + switch (eventcause) { + case EVENT_DUMMY_HOST_WAKEUP_SIGNAL: + dev_err(adapter->dev, "invalid EVENT: DUMMY_HOST_WAKEUP_SIGNAL," + " ignoring it\n"); + break; + case EVENT_LINK_SENSED: + dev_dbg(adapter->dev, "event: LINK_SENSED\n"); + if (!netif_carrier_ok(priv->netdev)) + netif_carrier_on(priv->netdev); + if (netif_queue_stopped(priv->netdev)) + netif_wake_queue(priv->netdev); + break; + + case EVENT_DEAUTHENTICATED: + dev_dbg(adapter->dev, "event: Deauthenticated\n"); + adapter->dbg.num_event_deauth++; + if (priv->media_connected) + mwifiex_reset_connect_state(priv); + break; + + case EVENT_DISASSOCIATED: + dev_dbg(adapter->dev, "event: Disassociated\n"); + adapter->dbg.num_event_disassoc++; + if (priv->media_connected) + mwifiex_reset_connect_state(priv); + break; + + case EVENT_LINK_LOST: + dev_dbg(adapter->dev, "event: Link lost\n"); + adapter->dbg.num_event_link_lost++; + if (priv->media_connected) + mwifiex_reset_connect_state(priv); + break; + + case EVENT_PS_SLEEP: + dev_dbg(adapter->dev, "info: EVENT: SLEEP\n"); + + adapter->ps_state = PS_STATE_PRE_SLEEP; + + mwifiex_check_ps_cond(adapter); + break; + + case EVENT_PS_AWAKE: + dev_dbg(adapter->dev, "info: EVENT: AWAKE\n"); + if (!adapter->pps_uapsd_mode && + priv->media_connected && + adapter->sleep_period.period) { + adapter->pps_uapsd_mode = true; + dev_dbg(adapter->dev, + "event: PPS/UAPSD mode activated\n"); + } + adapter->tx_lock_flag = false; + if (adapter->pps_uapsd_mode && adapter->gen_null_pkt) { + if (mwifiex_check_last_packet_indication(priv)) { + if (!adapter->data_sent) { + if (!mwifiex_send_null_packet(priv, + MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET + | + MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET)) + adapter->ps_state = + PS_STATE_SLEEP; + return 0; + } + } + } + adapter->ps_state = PS_STATE_AWAKE; + adapter->pm_wakeup_card_req = false; + adapter->pm_wakeup_fw_try = false; + + break; + + case EVENT_DEEP_SLEEP_AWAKE: + adapter->if_ops.wakeup_complete(adapter); + dev_dbg(adapter->dev, "event: DS_AWAKE\n"); + if (adapter->is_deep_sleep) + adapter->is_deep_sleep = false; + break; + + case EVENT_HS_ACT_REQ: + dev_dbg(adapter->dev, "event: HS_ACT_REQ\n"); + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_HS_CFG_ENH, + 0, 0, NULL, NULL); + break; + + case EVENT_MIC_ERR_UNICAST: + dev_dbg(adapter->dev, "event: UNICAST MIC ERROR\n"); + break; + + case EVENT_MIC_ERR_MULTICAST: + dev_dbg(adapter->dev, "event: MULTICAST MIC ERROR\n"); + break; + case EVENT_MIB_CHANGED: + case EVENT_INIT_DONE: + break; + + case EVENT_ADHOC_BCN_LOST: + dev_dbg(adapter->dev, "event: ADHOC_BCN_LOST\n"); + priv->adhoc_is_link_sensed = false; + mwifiex_clean_txrx(priv); + if (!netif_queue_stopped(priv->netdev)) + netif_stop_queue(priv->netdev); + if (netif_carrier_ok(priv->netdev)) + netif_carrier_off(priv->netdev); + break; + + case EVENT_BG_SCAN_REPORT: + dev_dbg(adapter->dev, "event: BGS_REPORT\n"); + /* Clear the previous scan result */ + memset(adapter->scan_table, 0x00, + sizeof(struct mwifiex_bssdescriptor) * IW_MAX_AP); + adapter->num_in_scan_table = 0; + adapter->bcn_buf_end = adapter->bcn_buf; + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_BG_SCAN_QUERY, + HostCmd_ACT_GEN_GET, 0, NULL, NULL); + break; + + case EVENT_PORT_RELEASE: + dev_dbg(adapter->dev, "event: PORT RELEASE\n"); + break; + + case EVENT_WMM_STATUS_CHANGE: + dev_dbg(adapter->dev, "event: WMM status changed\n"); + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_WMM_GET_STATUS, + 0, 0, NULL, NULL); + break; + + case EVENT_RSSI_LOW: + dev_dbg(adapter->dev, "event: Beacon RSSI_LOW\n"); + break; + case EVENT_SNR_LOW: + dev_dbg(adapter->dev, "event: Beacon SNR_LOW\n"); + break; + case EVENT_MAX_FAIL: + dev_dbg(adapter->dev, "event: MAX_FAIL\n"); + break; + case EVENT_RSSI_HIGH: + dev_dbg(adapter->dev, "event: Beacon RSSI_HIGH\n"); + break; + case EVENT_SNR_HIGH: + dev_dbg(adapter->dev, "event: Beacon SNR_HIGH\n"); + break; + case EVENT_DATA_RSSI_LOW: + dev_dbg(adapter->dev, "event: Data RSSI_LOW\n"); + break; + case EVENT_DATA_SNR_LOW: + dev_dbg(adapter->dev, "event: Data SNR_LOW\n"); + break; + case EVENT_DATA_RSSI_HIGH: + dev_dbg(adapter->dev, "event: Data RSSI_HIGH\n"); + break; + case EVENT_DATA_SNR_HIGH: + dev_dbg(adapter->dev, "event: Data SNR_HIGH\n"); + break; + case EVENT_LINK_QUALITY: + dev_dbg(adapter->dev, "event: Link Quality\n"); + break; + case EVENT_PRE_BEACON_LOST: + dev_dbg(adapter->dev, "event: Pre-Beacon Lost\n"); + break; + case EVENT_IBSS_COALESCED: + dev_dbg(adapter->dev, "event: IBSS_COALESCED\n"); + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_IBSS_COALESCING_STATUS, + HostCmd_ACT_GEN_GET, 0, NULL, NULL); + break; + case EVENT_ADDBA: + dev_dbg(adapter->dev, "event: ADDBA Request\n"); + mwifiex_prepare_cmd(priv, HostCmd_CMD_11N_ADDBA_RSP, + HostCmd_ACT_GEN_SET, 0, NULL, + adapter->event_body); + break; + case EVENT_DELBA: + dev_dbg(adapter->dev, "event: DELBA Request\n"); + mwifiex_11n_delete_ba_stream(priv, adapter->event_body); + break; + case EVENT_BA_STREAM_TIEMOUT: + dev_dbg(adapter->dev, "event: BA Stream timeout\n"); + mwifiex_11n_ba_stream_timeout(priv, + (struct host_cmd_ds_11n_batimeout + *) + adapter->event_body); + break; + case EVENT_AMSDU_AGGR_CTRL: + dev_dbg(adapter->dev, "event: AMSDU_AGGR_CTRL %d\n", + *(u16 *) adapter->event_body); + adapter->tx_buf_size = + min(adapter->curr_tx_buf_size, + le16_to_cpu(*(__le16 *) adapter->event_body)); + dev_dbg(adapter->dev, "event: tx_buf_size %d\n", + adapter->tx_buf_size); + break; + + case EVENT_WEP_ICV_ERR: + dev_dbg(adapter->dev, "event: WEP ICV error\n"); + break; + + case EVENT_BW_CHANGE: + dev_dbg(adapter->dev, "event: BW Change\n"); + break; + + case EVENT_HOSTWAKE_STAIE: + dev_dbg(adapter->dev, "event: HOSTWAKE_STAIE %d\n", eventcause); + break; + default: + dev_dbg(adapter->dev, "event: unknown event id: %#x\n", + eventcause); + break; + } + + return ret; +} diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c new file mode 100644 index 000000000000..b163507b1fe0 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -0,0 +1,2360 @@ +/* + * Marvell Wireless LAN device driver: functions for station ioctl + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" +#include "cfg80211.h" + +/* + * Copies the multicast address list from device to driver. + * + * This function does not validate the destination memory for + * size, and the calling function must ensure enough memory is + * available. + */ +static int +mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist, + struct net_device *dev) +{ + int i = 0; + struct netdev_hw_addr *ha; + + netdev_for_each_mc_addr(ha, dev) + memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN); + + return i; +} + +/* + * Allocate and fills a wait queue with proper parameters. + * + * This function needs to be called before an IOCTL request can be made. + * It can handle the following wait options: + * MWIFIEX_NO_WAIT - Waiting is disabled + * MWIFIEX_IOCTL_WAIT - Waiting is done on IOCTL wait queue + * MWIFIEX_CMD_WAIT - Waiting is done on command wait queue + * MWIFIEX_WSTATS_WAIT - Waiting is done on stats wait queue + */ +struct mwifiex_wait_queue * +mwifiex_alloc_fill_wait_queue(struct mwifiex_private *priv, + u8 wait_option) +{ + struct mwifiex_wait_queue *wait = NULL; + + wait = (struct mwifiex_wait_queue *) + kzalloc(sizeof(struct mwifiex_wait_queue), GFP_ATOMIC); + if (!wait) { + dev_err(priv->adapter->dev, "%s: fail to alloc buffer\n", + __func__); + return wait; + } + + wait->bss_index = priv->bss_index; + + switch (wait_option) { + case MWIFIEX_NO_WAIT: + wait->enabled = 0; + break; + case MWIFIEX_IOCTL_WAIT: + priv->ioctl_wait_q_woken = false; + wait->start_time = jiffies; + wait->wait = &priv->ioctl_wait_q; + wait->condition = &priv->ioctl_wait_q_woken; + wait->enabled = 1; + break; + case MWIFIEX_CMD_WAIT: + priv->cmd_wait_q_woken = false; + wait->start_time = jiffies; + wait->wait = &priv->cmd_wait_q; + wait->condition = &priv->cmd_wait_q_woken; + wait->enabled = 1; + break; + case MWIFIEX_WSTATS_WAIT: + priv->w_stats_wait_q_woken = false; + wait->start_time = jiffies; + wait->wait = &priv->w_stats_wait_q; + wait->condition = &priv->w_stats_wait_q_woken; + wait->enabled = 1; + break; + } + + return wait; +} + +/* + * Wait queue completion handler. + * + * This function waits on a particular wait queue. + * For NO_WAIT option, it returns immediately. It also cancels the + * pending IOCTL request after waking up, in case of errors. + */ +static void +mwifiex_wait_ioctl_complete(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u8 wait_option) +{ + bool cancel_flag = false; + + switch (wait_option) { + case MWIFIEX_NO_WAIT: + break; + case MWIFIEX_IOCTL_WAIT: + wait_event_interruptible(priv->ioctl_wait_q, + priv->ioctl_wait_q_woken); + if (!priv->ioctl_wait_q_woken) + cancel_flag = true; + break; + case MWIFIEX_CMD_WAIT: + wait_event_interruptible(priv->cmd_wait_q, + priv->cmd_wait_q_woken); + if (!priv->cmd_wait_q_woken) + cancel_flag = true; + break; + case MWIFIEX_WSTATS_WAIT: + wait_event_interruptible(priv->w_stats_wait_q, + priv->w_stats_wait_q_woken); + if (!priv->w_stats_wait_q_woken) + cancel_flag = true; + break; + } + if (cancel_flag) { + mwifiex_cancel_pending_ioctl(priv->adapter, wait); + dev_dbg(priv->adapter->dev, "cmd: IOCTL cancel: wait=%p, wait_option=%d\n", + wait, wait_option); + } + + return; +} + +/* + * The function waits for the request to complete and issues the + * completion handler, if required. + */ +int mwifiex_request_ioctl(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + int status, u8 wait_option) +{ + switch (status) { + case -EINPROGRESS: + dev_dbg(priv->adapter->dev, "cmd: IOCTL pending: wait=%p, wait_option=%d\n", + wait, wait_option); + atomic_inc(&priv->adapter->ioctl_pending); + /* Status pending, wake up main process */ + queue_work(priv->adapter->workqueue, &priv->adapter->main_work); + + /* Wait for completion */ + if (wait_option) { + mwifiex_wait_ioctl_complete(priv, wait, wait_option); + status = wait->status; + } + break; + case 0: + case -1: + case -EBUSY: + default: + break; + } + return status; +} +EXPORT_SYMBOL_GPL(mwifiex_request_ioctl); + +/* + * IOCTL request handler to set/get MAC address. + * + * This function prepares the correct firmware command and + * issues it to get the extended version information. + */ +static int mwifiex_bss_ioctl_mac_address(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u8 action, u8 *mac) +{ + int ret = 0; + + if ((action == HostCmd_ACT_GEN_GET) && mac) { + memcpy(mac, priv->curr_addr, ETH_ALEN); + return 0; + } + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS, + action, 0, wait, mac); + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * Sends IOCTL request to set MAC address. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_request_set_mac_address(struct mwifiex_private *priv) +{ + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + u8 wait_option = MWIFIEX_CMD_WAIT; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_bss_ioctl_mac_address(priv, wait, HostCmd_ACT_GEN_SET, + NULL); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + if (!status) + memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN); + else + dev_err(priv->adapter->dev, "set mac address failed: status=%d" + " error_code=%#x\n", status, wait->status); + + kfree(wait); + return status; +} + +/* + * IOCTL request handler to set multicast list. + * + * This function prepares the correct firmware command and + * issues it to set the multicast list. + * + * This function can be used to enable promiscuous mode, or enable all + * multicast packets, or to enable selective multicast. + */ +static int +mwifiex_bss_ioctl_multicast_list(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u16 action, + struct mwifiex_multicast_list *mcast_list) +{ + int ret = 0; + u16 old_pkt_filter; + + old_pkt_filter = priv->curr_pkt_filter; + if (action == HostCmd_ACT_GEN_GET) + return -1; + + if (mcast_list->mode == MWIFIEX_PROMISC_MODE) { + dev_dbg(priv->adapter->dev, "info: Enable Promiscuous mode\n"); + priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE; + priv->curr_pkt_filter &= + ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE; + } else { + /* Multicast */ + priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE; + if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) { + dev_dbg(priv->adapter->dev, + "info: Enabling All Multicast!\n"); + priv->curr_pkt_filter |= + HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE; + } else { + priv->curr_pkt_filter &= + ~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE; + if (mcast_list->num_multicast_addr) { + dev_dbg(priv->adapter->dev, + "info: Set multicast list=%d\n", + mcast_list->num_multicast_addr); + /* Set multicast addresses to firmware */ + if (old_pkt_filter == priv->curr_pkt_filter) { + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_MAC_MULTICAST_ADR, + action, 0, wait, mcast_list); + if (!ret) + ret = -EINPROGRESS; + } else { + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_MAC_MULTICAST_ADR, + action, 0, NULL, + mcast_list); + } + } + } + } + dev_dbg(priv->adapter->dev, + "info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n", + old_pkt_filter, priv->curr_pkt_filter); + if (old_pkt_filter != priv->curr_pkt_filter) { + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL, action, + 0, wait, &priv->curr_pkt_filter); + if (!ret) + ret = -EINPROGRESS; + } + + return ret; +} + +/* + * Sends IOCTL request to set multicast list. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +void +mwifiex_request_set_multicast_list(struct mwifiex_private *priv, + struct net_device *dev) +{ + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_multicast_list mcast_list; + u8 wait_option = MWIFIEX_NO_WAIT; + int status = 0; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return; + + if (dev->flags & IFF_PROMISC) { + mcast_list.mode = MWIFIEX_PROMISC_MODE; + } else if (dev->flags & IFF_ALLMULTI || + netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) { + mcast_list.mode = MWIFIEX_ALL_MULTI_MODE; + } else { + mcast_list.mode = MWIFIEX_MULTICAST_MODE; + if (netdev_mc_count(dev)) + mcast_list.num_multicast_addr = + mwifiex_copy_mcast_addr(&mcast_list, dev); + } + status = mwifiex_bss_ioctl_multicast_list(priv, wait, + HostCmd_ACT_GEN_SET, + &mcast_list); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + if (wait && status != -EINPROGRESS) + kfree(wait); + + return; +} + +/* + * IOCTL request handler to disconnect from a BSS/IBSS. + */ +static int mwifiex_bss_ioctl_stop(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, u8 *mac) +{ + return mwifiex_deauthenticate(priv, wait, mac); +} + +/* + * Sends IOCTL request to disconnect from a BSS. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_disconnect(struct mwifiex_private *priv, u8 wait_option, u8 *mac) +{ + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_bss_ioctl_stop(priv, wait, mac); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + + kfree(wait); + return status; +} +EXPORT_SYMBOL_GPL(mwifiex_disconnect); + +/* + * IOCTL request handler to join a BSS/IBSS. + * + * In Ad-Hoc mode, the IBSS is created if not found in scan list. + * In both Ad-Hoc and infra mode, an deauthentication is performed + * first. + */ +static int mwifiex_bss_ioctl_start(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ssid_bssid *ssid_bssid) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + s32 i = -1; + + priv->scan_block = false; + if (!ssid_bssid) + return -1; + + if (priv->bss_mode == NL80211_IFTYPE_STATION) { + /* Infra mode */ + ret = mwifiex_deauthenticate(priv, NULL, NULL); + if (ret) + return ret; + + /* Search for the requested SSID in the scan table */ + if (ssid_bssid->ssid.ssid_len) + i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid, + NULL, NL80211_IFTYPE_STATION); + else + i = mwifiex_find_bssid_in_list(priv, + (u8 *) &ssid_bssid->bssid, + NL80211_IFTYPE_STATION); + if (i < 0) + return -1; + + dev_dbg(adapter->dev, + "info: SSID found in scan list ... associating...\n"); + + /* Clear any past association response stored for + * application retrieval */ + priv->assoc_rsp_size = 0; + ret = mwifiex_associate(priv, wait, &adapter->scan_table[i]); + if (ret) + return ret; + } else { + /* Adhoc mode */ + /* If the requested SSID matches current SSID, return */ + if (ssid_bssid->ssid.ssid_len && + (!mwifiex_ssid_cmp + (&priv->curr_bss_params.bss_descriptor.ssid, + &ssid_bssid->ssid))) + return 0; + + /* Exit Adhoc mode first */ + dev_dbg(adapter->dev, "info: Sending Adhoc Stop\n"); + ret = mwifiex_deauthenticate(priv, NULL, NULL); + if (ret) + return ret; + + priv->adhoc_is_link_sensed = false; + + /* Search for the requested network in the scan table */ + if (ssid_bssid->ssid.ssid_len) + i = mwifiex_find_ssid_in_list(priv, + &ssid_bssid->ssid, NULL, + NL80211_IFTYPE_ADHOC); + else + i = mwifiex_find_bssid_in_list(priv, + (u8 *)&ssid_bssid->bssid, + NL80211_IFTYPE_ADHOC); + + if (i >= 0) { + dev_dbg(adapter->dev, "info: network found in scan" + " list. Joining...\n"); + ret = mwifiex_adhoc_join(priv, wait, + &adapter->scan_table[i]); + if (ret) + return ret; + } else { /* i >= 0 */ + dev_dbg(adapter->dev, "info: Network not found in " + "the list, creating adhoc with ssid = %s\n", + ssid_bssid->ssid.ssid); + ret = mwifiex_adhoc_start(priv, wait, + &ssid_bssid->ssid); + if (ret) + return ret; + } + } + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * Sends IOCTL request to connect with a BSS. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_bss_start(struct mwifiex_private *priv, u8 wait_option, + struct mwifiex_ssid_bssid *ssid_bssid) +{ + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ssid_bssid tmp_ssid_bssid; + int status = 0; + + /* Stop the O.S. TX queue if needed */ + if (!netif_queue_stopped(priv->netdev)) + netif_stop_queue(priv->netdev); + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + if (ssid_bssid) + memcpy(&tmp_ssid_bssid, ssid_bssid, + sizeof(struct mwifiex_ssid_bssid)); + status = mwifiex_bss_ioctl_start(priv, wait, &tmp_ssid_bssid); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + + kfree(wait); + return status; +} + +/* + * IOCTL request handler to set host sleep configuration. + * + * This function prepares the correct firmware command and + * issues it. + */ +static int +mwifiex_pm_ioctl_hs_cfg(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u16 action, struct mwifiex_ds_hs_cfg *hs_cfg) +{ + struct mwifiex_adapter *adapter = priv->adapter; + int status = 0; + u32 prev_cond = 0; + + switch (action) { + case HostCmd_ACT_GEN_SET: + if (adapter->pps_uapsd_mode) { + dev_dbg(adapter->dev, "info: Host Sleep IOCTL" + " is blocked in UAPSD/PPS mode\n"); + status = -1; + break; + } + if (hs_cfg->is_invoke_hostcmd) { + if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL) { + if (!adapter->is_hs_configured) + /* Already cancelled */ + break; + /* Save previous condition */ + prev_cond = le32_to_cpu(adapter->hs_cfg + .conditions); + adapter->hs_cfg.conditions = + cpu_to_le32(hs_cfg->conditions); + } else if (hs_cfg->conditions) { + adapter->hs_cfg.conditions = + cpu_to_le32(hs_cfg->conditions); + adapter->hs_cfg.gpio = (u8)hs_cfg->gpio; + if (hs_cfg->gap) + adapter->hs_cfg.gap = (u8)hs_cfg->gap; + } else if (adapter->hs_cfg.conditions == + cpu_to_le32( + HOST_SLEEP_CFG_CANCEL)) { + /* Return failure if no parameters for HS + enable */ + status = -1; + break; + } + status = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_HS_CFG_ENH, + HostCmd_ACT_GEN_SET, + 0, wait, &adapter->hs_cfg); + if (!status) + status = -EINPROGRESS; + if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL) + /* Restore previous condition */ + adapter->hs_cfg.conditions = + cpu_to_le32(prev_cond); + } else { + adapter->hs_cfg.conditions = + cpu_to_le32(hs_cfg->conditions); + adapter->hs_cfg.gpio = (u8)hs_cfg->gpio; + adapter->hs_cfg.gap = (u8)hs_cfg->gap; + } + break; + case HostCmd_ACT_GEN_GET: + hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions); + hs_cfg->gpio = adapter->hs_cfg.gpio; + hs_cfg->gap = adapter->hs_cfg.gap; + break; + default: + status = -1; + break; + } + + return status; +} + +/* + * Sends IOCTL request to set Host Sleep parameters. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action, + u8 wait_option, + struct mwifiex_ds_hs_cfg *hscfg) +{ + int ret = 0; + struct mwifiex_wait_queue *wait = NULL; + + if (!hscfg) + return -ENOMEM; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + ret = mwifiex_pm_ioctl_hs_cfg(priv, wait, action, hscfg); + + ret = mwifiex_request_ioctl(priv, wait, ret, wait_option); + + if (wait && (ret != -EINPROGRESS)) + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to cancel the existing Host Sleep configuration. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_cancel_hs(struct mwifiex_private *priv, u8 wait_option) +{ + int ret = 0; + struct mwifiex_ds_hs_cfg hscfg; + + /* Cancel Host Sleep */ + hscfg.conditions = HOST_SLEEP_CFG_CANCEL; + hscfg.is_invoke_hostcmd = true; + ret = mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET, + wait_option, &hscfg); + + return ret; +} +EXPORT_SYMBOL_GPL(mwifiex_cancel_hs); + +/* + * Sends IOCTL request to cancel the existing Host Sleep configuration. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_enable_hs(struct mwifiex_adapter *adapter) +{ + struct mwifiex_ds_hs_cfg hscfg; + + if (adapter->hs_activated) { + dev_dbg(adapter->dev, "cmd: HS Already actived\n"); + return true; + } + + /* Enable Host Sleep */ + adapter->hs_activate_wait_q_woken = false; + + memset(&hscfg, 0, sizeof(struct mwifiex_hs_config_param)); + hscfg.is_invoke_hostcmd = true; + + if (mwifiex_set_hs_params(mwifiex_get_priv(adapter, + MWIFIEX_BSS_ROLE_STA), + HostCmd_ACT_GEN_SET, + MWIFIEX_IOCTL_WAIT, &hscfg)) { + dev_err(adapter->dev, "IOCTL request HS enable failed\n"); + return false; + } + + wait_event_interruptible(adapter->hs_activate_wait_q, + adapter->hs_activate_wait_q_woken); + + return true; +} +EXPORT_SYMBOL_GPL(mwifiex_enable_hs); + +/* + * IOCTL request handler to get signal information. + * + * This function prepares the correct firmware command and + * issues it to get the signal (RSSI) information. + * + * This only works in the connected mode. + */ +static int mwifiex_get_info_signal(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_get_signal *signal) +{ + int ret = 0; + + if (!wait) { + dev_err(priv->adapter->dev, "WAIT information is not present\n"); + return -1; + } + + /* Signal info can be obtained only if connected */ + if (!priv->media_connected) { + dev_dbg(priv->adapter->dev, + "info: Can not get signal in disconnected state\n"); + return -1; + } + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_RSSI_INFO, + HostCmd_ACT_GEN_GET, 0, wait, signal); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to get statistics. + * + * This function prepares the correct firmware command and + * issues it to get the statistics (RSSI) information. + */ +static int mwifiex_get_info_stats(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_get_stats *log) +{ + int ret = 0; + + if (!wait) { + dev_err(priv->adapter->dev, "MWIFIEX IOCTL information is not present\n"); + return -1; + } + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_GET_LOG, + HostCmd_ACT_GEN_GET, 0, wait, log); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to get BSS information. + * + * This function collates the information from different driver structures + * to send to the user. + */ +int mwifiex_get_bss_info(struct mwifiex_private *priv, + struct mwifiex_bss_info *info) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_bssdescriptor *bss_desc; + s32 tbl_idx = 0; + + if (!info) + return -1; + + /* Get current BSS info */ + bss_desc = &priv->curr_bss_params.bss_descriptor; + + /* BSS mode */ + info->bss_mode = priv->bss_mode; + + /* SSID */ + memcpy(&info->ssid, &bss_desc->ssid, + sizeof(struct mwifiex_802_11_ssid)); + + /* BSSID */ + memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN); + + /* Channel */ + info->bss_chan = bss_desc->channel; + + /* Region code */ + info->region_code = adapter->region_code; + + /* Scan table index if connected */ + info->scan_table_idx = 0; + if (priv->media_connected) { + tbl_idx = + mwifiex_find_ssid_in_list(priv, &bss_desc->ssid, + bss_desc->mac_address, + priv->bss_mode); + if (tbl_idx >= 0) + info->scan_table_idx = tbl_idx; + } + + /* Connection status */ + info->media_connected = priv->media_connected; + + /* Tx power information */ + info->max_power_level = priv->max_tx_power_level; + info->min_power_level = priv->min_tx_power_level; + + /* AdHoc state */ + info->adhoc_state = priv->adhoc_state; + + /* Last beacon NF */ + info->bcn_nf_last = priv->bcn_nf_last; + + /* wep status */ + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED) + info->wep_status = true; + else + info->wep_status = false; + + info->is_hs_configured = adapter->is_hs_configured; + info->is_deep_sleep = adapter->is_deep_sleep; + + return 0; +} + +/* + * IOCTL request handler to get extended version information. + * + * This function prepares the correct firmware command and + * issues it to get the extended version information. + */ +static int mwifiex_get_info_ver_ext(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ver_ext *ver_ext) +{ + int ret = 0; + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_VERSION_EXT, + HostCmd_ACT_GEN_GET, 0, wait, ver_ext); + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set/get SNMP MIB parameters. + * + * This function prepares the correct firmware command and + * issues it. + * + * Currently the following parameters are supported - + * Set/get RTS Threshold + * Set/get fragmentation threshold + * Set/get retry count + */ +int mwifiex_snmp_mib_ioctl(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u32 cmd_oid, u16 action, u32 *value) +{ + int ret = 0; + + if (!value) + return -1; + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB, + action, cmd_oid, wait, value); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set/get band configurations. + * + * For SET operation, it performs extra checks to make sure the Ad-Hoc + * band and channel are compatible. Otherwise it returns an error. + * + * For GET operation, this function retrieves the following information - + * - Infra bands + * - Ad-hoc band + * - Ad-hoc channel + * - Secondary channel offset + */ +int mwifiex_radio_ioctl_band_cfg(struct mwifiex_private *priv, + u16 action, + struct mwifiex_ds_band_cfg *radio_cfg) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u8 infra_band = 0; + u8 adhoc_band = 0; + u32 adhoc_channel = 0; + + if (action == HostCmd_ACT_GEN_GET) { + /* Infra Bands */ + radio_cfg->config_bands = adapter->config_bands; + /* Adhoc Band */ + radio_cfg->adhoc_start_band = adapter->adhoc_start_band; + /* Adhoc channel */ + radio_cfg->adhoc_channel = priv->adhoc_channel; + /* Secondary channel offset */ + radio_cfg->sec_chan_offset = adapter->chan_offset; + return 0; + } + + /* For action = SET */ + infra_band = (u8) radio_cfg->config_bands; + adhoc_band = (u8) radio_cfg->adhoc_start_band; + adhoc_channel = radio_cfg->adhoc_channel; + + /* SET Infra band */ + if ((infra_band | adapter->fw_bands) & ~adapter->fw_bands) + return -1; + + adapter->config_bands = infra_band; + + /* SET Ad-hoc Band */ + if ((adhoc_band | adapter->fw_bands) & ~adapter->fw_bands) + return -1; + + if (adhoc_band) + adapter->adhoc_start_band = adhoc_band; + adapter->chan_offset = (u8) radio_cfg->sec_chan_offset; + /* + * If no adhoc_channel is supplied verify if the existing adhoc + * channel compiles with new adhoc_band + */ + if (!adhoc_channel) { + if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, adapter->adhoc_start_band, + priv->adhoc_channel)) { + /* Pass back the default channel */ + radio_cfg->adhoc_channel = DEFAULT_AD_HOC_CHANNEL; + if ((adapter->adhoc_start_band & BAND_A) + || (adapter->adhoc_start_band & BAND_AN)) + radio_cfg->adhoc_channel = + DEFAULT_AD_HOC_CHANNEL_A; + } + } else { /* Retrurn error if adhoc_band and + adhoc_channel combination is invalid */ + if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, adapter->adhoc_start_band, (u16) adhoc_channel)) + return -1; + priv->adhoc_channel = (u8) adhoc_channel; + } + if ((adhoc_band & BAND_GN) || (adhoc_band & BAND_AN)) + adapter->adhoc_11n_enabled = true; + else + adapter->adhoc_11n_enabled = false; + + return 0; +} + +/* + * IOCTL request handler to set/get active channel. + * + * This function performs validity checking on channel/frequency + * compatibility and returns failure if not valid. + */ +int mwifiex_bss_ioctl_channel(struct mwifiex_private *priv, u16 action, + struct mwifiex_chan_freq_power *chan) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct mwifiex_chan_freq_power *cfp = NULL; + + if (!chan) + return -1; + + if (action == HostCmd_ACT_GEN_GET) { + cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv, + priv->curr_bss_params.band, + (u16) priv->curr_bss_params.bss_descriptor. + channel); + chan->channel = cfp->channel; + chan->freq = cfp->freq; + + return 0; + } + if (!chan->channel && !chan->freq) + return -1; + if (adapter->adhoc_start_band & BAND_AN) + adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN; + else if (adapter->adhoc_start_band & BAND_A) + adapter->adhoc_start_band = BAND_G | BAND_B; + if (chan->channel) { + if (chan->channel <= MAX_CHANNEL_BAND_BG) + cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, 0, (u16) chan->channel); + if (!cfp) { + cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211 + (priv, BAND_A, (u16) chan->channel); + if (cfp) { + if (adapter->adhoc_11n_enabled) + adapter->adhoc_start_band = BAND_A + | BAND_AN; + else + adapter->adhoc_start_band = BAND_A; + } + } + } else { + if (chan->freq <= MAX_FREQUENCY_BAND_BG) + cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211( + priv, 0, chan->freq); + if (!cfp) { + cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211 + (priv, BAND_A, chan->freq); + if (cfp) { + if (adapter->adhoc_11n_enabled) + adapter->adhoc_start_band = BAND_A + | BAND_AN; + else + adapter->adhoc_start_band = BAND_A; + } + } + } + if (!cfp || !cfp->channel) { + dev_err(adapter->dev, "invalid channel/freq\n"); + return -1; + } + priv->adhoc_channel = (u8) cfp->channel; + chan->channel = cfp->channel; + chan->freq = cfp->freq; + + return 0; +} + +/* + * IOCTL request handler to set/get Ad-Hoc channel. + * + * This function prepares the correct firmware command and + * issues it to set or get the ad-hoc channel. + */ +static int mwifiex_bss_ioctl_ibss_channel(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u16 action, u16 *channel) +{ + int ret = 0; + + if (action == HostCmd_ACT_GEN_GET) { + if (!priv->media_connected) { + *channel = priv->adhoc_channel; + return ret; + } + } else { + priv->adhoc_channel = (u8) *channel; + } + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_RF_CHANNEL, + action, 0, wait, channel); + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to find a particular BSS. + * + * The BSS can be searched with either a BSSID or a SSID. If none of + * these are provided, just the best BSS (best RSSI) is returned. + */ +int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ssid_bssid *ssid_bssid) +{ + struct mwifiex_adapter *adapter = priv->adapter; + int ret = 0; + struct mwifiex_bssdescriptor *bss_desc; + u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 }; + u8 mac[ETH_ALEN]; + int i = 0; + + if (memcmp(ssid_bssid->bssid, zero_mac, sizeof(zero_mac))) { + i = mwifiex_find_bssid_in_list(priv, + (u8 *) ssid_bssid->bssid, + priv->bss_mode); + if (i < 0) { + memcpy(mac, ssid_bssid->bssid, sizeof(mac)); + dev_err(adapter->dev, "cannot find bssid %pM\n", mac); + return -1; + } + bss_desc = &adapter->scan_table[i]; + memcpy(&ssid_bssid->ssid, &bss_desc->ssid, + sizeof(struct mwifiex_802_11_ssid)); + } else if (ssid_bssid->ssid.ssid_len) { + i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid, NULL, + priv->bss_mode); + if (i < 0) { + dev_err(adapter->dev, "cannot find ssid %s\n", + ssid_bssid->ssid.ssid); + return -1; + } + bss_desc = &adapter->scan_table[i]; + memcpy(ssid_bssid->bssid, bss_desc->mac_address, ETH_ALEN); + } else { + ret = mwifiex_find_best_network(priv, ssid_bssid); + } + + return ret; +} + +/* + * IOCTL request handler to change Ad-Hoc channel. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + * + * The function follows the following steps to perform the change - + * - Get current IBSS information + * - Get current channel + * - If no change is required, return + * - If not connected, change channel and return + * - If connected, + * - Disconnect + * - Change channel + * - Perform specific SSID scan with same SSID + * - Start/Join the IBSS + */ +int +mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel) +{ + int ret = 0; + int status = 0; + struct mwifiex_bss_info bss_info; + struct mwifiex_wait_queue *wait = NULL; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + struct mwifiex_ssid_bssid ssid_bssid; + u16 curr_chan = 0; + + memset(&bss_info, 0, sizeof(bss_info)); + + /* Get BSS information */ + if (mwifiex_get_bss_info(priv, &bss_info)) + return -1; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + /* Get current channel */ + status = mwifiex_bss_ioctl_ibss_channel(priv, wait, HostCmd_ACT_GEN_GET, + &curr_chan); + + if (mwifiex_request_ioctl(priv, wait, status, wait_option)) { + ret = -1; + goto done; + } + if (curr_chan == channel) { + ret = 0; + goto done; + } + dev_dbg(priv->adapter->dev, "cmd: updating channel from %d to %d\n", + curr_chan, channel); + + if (!bss_info.media_connected) { + ret = 0; + goto done; + } + + /* Do disonnect */ + memset(&ssid_bssid, 0, ETH_ALEN); + status = mwifiex_bss_ioctl_stop(priv, wait, ssid_bssid.bssid); + + if (mwifiex_request_ioctl(priv, wait, status, wait_option)) { + ret = -1; + goto done; + } + + status = mwifiex_bss_ioctl_ibss_channel(priv, wait, HostCmd_ACT_GEN_SET, + (u16 *) &channel); + + if (mwifiex_request_ioctl(priv, wait, status, wait_option)) { + ret = -1; + goto done; + } + + /* Do specific SSID scanning */ + if (mwifiex_request_scan(priv, wait_option, &bss_info.ssid)) { + ret = -1; + goto done; + } + /* Start/Join Adhoc network */ + memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid)); + memcpy(&ssid_bssid.ssid, &bss_info.ssid, + sizeof(struct mwifiex_802_11_ssid)); + + status = mwifiex_bss_ioctl_start(priv, wait, &ssid_bssid); + + if (mwifiex_request_ioctl(priv, wait, status, wait_option)) + ret = -1; + +done: + kfree(wait); + return ret; +} + +/* + * IOCTL request handler to get rate. + * + * This function prepares the correct firmware command and + * issues it to get the current rate if it is connected, + * otherwise, the function returns the lowest supported rate + * for the band. + */ +static int mwifiex_rate_ioctl_get_rate_value(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_rate_cfg *rate_cfg) +{ + struct mwifiex_adapter *adapter = priv->adapter; + int ret = 0; + + rate_cfg->is_rate_auto = priv->is_data_rate_auto; + if (!priv->media_connected) { + switch (adapter->config_bands) { + case BAND_B: + /* Return the lowest supported rate for B band */ + rate_cfg->rate = supported_rates_b[0] & 0x7f; + break; + case BAND_G: + case BAND_G | BAND_GN: + /* Return the lowest supported rate for G band */ + rate_cfg->rate = supported_rates_g[0] & 0x7f; + break; + case BAND_B | BAND_G: + case BAND_A | BAND_B | BAND_G: + case BAND_A | BAND_B: + case BAND_A | BAND_B | BAND_G | BAND_AN | BAND_GN: + case BAND_B | BAND_G | BAND_GN: + /* Return the lowest supported rate for BG band */ + rate_cfg->rate = supported_rates_bg[0] & 0x7f; + break; + case BAND_A: + case BAND_A | BAND_G: + case BAND_A | BAND_G | BAND_AN | BAND_GN: + case BAND_A | BAND_AN: + /* Return the lowest supported rate for A band */ + rate_cfg->rate = supported_rates_a[0] & 0x7f; + break; + case BAND_GN: + /* Return the lowest supported rate for N band */ + rate_cfg->rate = supported_rates_n[0] & 0x7f; + break; + default: + dev_warn(adapter->dev, "invalid band %#x\n", + adapter->config_bands); + break; + } + } else { + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_TX_RATE_QUERY, + HostCmd_ACT_GEN_GET, 0, wait, NULL); + if (!ret) + ret = -EINPROGRESS; + } + + return ret; +} + +/* + * IOCTL request handler to set rate. + * + * This function prepares the correct firmware command and + * issues it to set the current rate. + * + * The function also performs validation checking on the supplied value. + */ +static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_rate_cfg *rate_cfg) +{ + u8 rates[MWIFIEX_SUPPORTED_RATES]; + u8 *rate = NULL; + int rate_index = 0; + u16 bitmap_rates[MAX_BITMAP_RATES_SIZE]; + u32 i = 0; + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + + if (rate_cfg->is_rate_auto) { + memset(bitmap_rates, 0, sizeof(bitmap_rates)); + /* Support all HR/DSSS rates */ + bitmap_rates[0] = 0x000F; + /* Support all OFDM rates */ + bitmap_rates[1] = 0x00FF; + /* Support all HT-MCSs rate */ + for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates) - 3; i++) + bitmap_rates[i + 2] = 0xFFFF; + bitmap_rates[9] = 0x3FFF; + } else { + memset(rates, 0, sizeof(rates)); + mwifiex_get_active_data_rates(priv, rates); + rate = rates; + for (i = 0; (rate[i] && i < MWIFIEX_SUPPORTED_RATES); i++) { + dev_dbg(adapter->dev, "info: rate=%#x wanted=%#x\n", + rate[i], rate_cfg->rate); + if ((rate[i] & 0x7f) == (rate_cfg->rate & 0x7f)) + break; + } + if (!rate[i] || (i == MWIFIEX_SUPPORTED_RATES)) { + dev_err(adapter->dev, "fixed data rate %#x is out " + "of range\n", rate_cfg->rate); + return -1; + } + memset(bitmap_rates, 0, sizeof(bitmap_rates)); + + rate_index = + mwifiex_data_rate_to_index(adapter, rate_cfg->rate); + + /* Only allow b/g rates to be set */ + if (rate_index >= MWIFIEX_RATE_INDEX_HRDSSS0 && + rate_index <= MWIFIEX_RATE_INDEX_HRDSSS3) { + bitmap_rates[0] = 1 << rate_index; + } else { + rate_index -= 1; /* There is a 0x00 in the table */ + if (rate_index >= MWIFIEX_RATE_INDEX_OFDM0 && + rate_index <= MWIFIEX_RATE_INDEX_OFDM7) + bitmap_rates[1] = 1 << (rate_index - + MWIFIEX_RATE_INDEX_OFDM0); + } + } + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TX_RATE_CFG, + HostCmd_ACT_GEN_SET, 0, wait, bitmap_rates); + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set/get rate. + * + * This function can be used to set/get either the rate value or the + * rate index. + */ +static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_rate_cfg *rate_cfg) +{ + int status = 0; + + if (!rate_cfg) + return -1; + + if (rate_cfg->action == HostCmd_ACT_GEN_GET) + status = mwifiex_rate_ioctl_get_rate_value( + priv, wait, rate_cfg); + else + status = mwifiex_rate_ioctl_set_rate_value( + priv, wait, rate_cfg); + + return status; +} + +/* + * Sends IOCTL request to get the data rate. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_drv_get_data_rate(struct mwifiex_private *priv, + struct mwifiex_rate_cfg *rate) +{ + int ret = 0; + struct mwifiex_wait_queue *wait = NULL; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + memset(rate, 0, sizeof(struct mwifiex_rate_cfg)); + rate->action = HostCmd_ACT_GEN_GET; + ret = mwifiex_rate_ioctl_cfg(priv, wait, rate); + + ret = mwifiex_request_ioctl(priv, wait, ret, wait_option); + if (!ret) { + if (rate && rate->is_rate_auto) + rate->rate = mwifiex_index_to_data_rate(priv->adapter, + priv->tx_rate, priv->tx_htinfo); + else if (rate) + rate->rate = priv->data_rate; + } else { + ret = -1; + } + + kfree(wait); + return ret; +} + +/* + * IOCTL request handler to set tx power configuration. + * + * This function prepares the correct firmware command and + * issues it. + * + * For non-auto power mode, all the following power groups are set - + * - Modulation class HR/DSSS + * - Modulation class OFDM + * - Modulation class HTBW20 + * - Modulation class HTBW40 + */ +static int mwifiex_power_ioctl_set_power(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_power_cfg *power_cfg) +{ + int ret = 0; + struct host_cmd_ds_txpwr_cfg *txp_cfg = NULL; + struct mwifiex_types_power_group *pg_tlv = NULL; + struct mwifiex_power_group *pg = NULL; + u8 *buf = NULL; + u16 dbm = 0; + + if (!power_cfg->is_power_auto) { + dbm = (u16) power_cfg->power_level; + if ((dbm < priv->min_tx_power_level) || + (dbm > priv->max_tx_power_level)) { + dev_err(priv->adapter->dev, "txpower value %d dBm" + " is out of range (%d dBm-%d dBm)\n", + dbm, priv->min_tx_power_level, + priv->max_tx_power_level); + return -1; + } + } + buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL); + if (!buf) { + dev_err(priv->adapter->dev, "%s: failed to alloc cmd buffer\n", + __func__); + return -1; + } + + txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf; + txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET); + if (!power_cfg->is_power_auto) { + txp_cfg->mode = cpu_to_le32(1); + pg_tlv = (struct mwifiex_types_power_group *) (buf + + sizeof(struct host_cmd_ds_txpwr_cfg)); + pg_tlv->type = TLV_TYPE_POWER_GROUP; + pg_tlv->length = 4 * sizeof(struct mwifiex_power_group); + pg = (struct mwifiex_power_group *) (buf + + sizeof(struct host_cmd_ds_txpwr_cfg) + + sizeof(struct mwifiex_types_power_group)); + /* Power group for modulation class HR/DSSS */ + pg->first_rate_code = 0x00; + pg->last_rate_code = 0x03; + pg->modulation_class = MOD_CLASS_HR_DSSS; + pg->power_step = 0; + pg->power_min = (s8) dbm; + pg->power_max = (s8) dbm; + pg++; + /* Power group for modulation class OFDM */ + pg->first_rate_code = 0x00; + pg->last_rate_code = 0x07; + pg->modulation_class = MOD_CLASS_OFDM; + pg->power_step = 0; + pg->power_min = (s8) dbm; + pg->power_max = (s8) dbm; + pg++; + /* Power group for modulation class HTBW20 */ + pg->first_rate_code = 0x00; + pg->last_rate_code = 0x20; + pg->modulation_class = MOD_CLASS_HT; + pg->power_step = 0; + pg->power_min = (s8) dbm; + pg->power_max = (s8) dbm; + pg->ht_bandwidth = HT_BW_20; + pg++; + /* Power group for modulation class HTBW40 */ + pg->first_rate_code = 0x00; + pg->last_rate_code = 0x20; + pg->modulation_class = MOD_CLASS_HT; + pg->power_step = 0; + pg->power_min = (s8) dbm; + pg->power_max = (s8) dbm; + pg->ht_bandwidth = HT_BW_40; + } + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TXPWR_CFG, + HostCmd_ACT_GEN_SET, 0, wait, buf); + if (!ret) + ret = -EINPROGRESS; + kfree(buf); + + return ret; +} + +/* + * IOCTL request handler to get power save mode. + * + * This function prepares the correct firmware command and + * issues it. + */ +static int mwifiex_pm_ioctl_ps_mode(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + u32 *ps_mode, u16 action) +{ + int ret = 0; + struct mwifiex_adapter *adapter = priv->adapter; + u16 sub_cmd; + + if (action == HostCmd_ACT_GEN_SET) { + if (*ps_mode) + adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP; + else + adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM; + sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS; + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH, + sub_cmd, BITMAP_STA_PS, wait, NULL); + if ((!ret) && (sub_cmd == DIS_AUTO_PS)) + ret = mwifiex_prepare_cmd(priv, + HostCmd_CMD_802_11_PS_MODE_ENH, GET_PS, + 0, NULL, NULL); + } else { + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH, + GET_PS, 0, wait, NULL); + } + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set/reset WPA IE. + * + * The supplied WPA IE is treated as a opaque buffer. Only the first field + * is checked to determine WPA version. If buffer length is zero, the existing + * WPA IE is reset. + */ +static int mwifiex_set_wpa_ie_helper(struct mwifiex_private *priv, + u8 *ie_data_ptr, u16 ie_len) +{ + if (ie_len) { + if (ie_len > sizeof(priv->wpa_ie)) { + dev_err(priv->adapter->dev, + "failed to copy WPA IE, too big\n"); + return -1; + } + memcpy(priv->wpa_ie, ie_data_ptr, ie_len); + priv->wpa_ie_len = (u8) ie_len; + dev_dbg(priv->adapter->dev, "cmd: Set Wpa_ie_len=%d IE=%#x\n", + priv->wpa_ie_len, priv->wpa_ie[0]); + + if (priv->wpa_ie[0] == WLAN_EID_WPA) { + priv->sec_info.wpa_enabled = true; + } else if (priv->wpa_ie[0] == WLAN_EID_RSN) { + priv->sec_info.wpa2_enabled = true; + } else { + priv->sec_info.wpa_enabled = false; + priv->sec_info.wpa2_enabled = false; + } + } else { + memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie)); + priv->wpa_ie_len = 0; + dev_dbg(priv->adapter->dev, "info: reset wpa_ie_len=%d IE=%#x\n", + priv->wpa_ie_len, priv->wpa_ie[0]); + priv->sec_info.wpa_enabled = false; + priv->sec_info.wpa2_enabled = false; + } + + return 0; +} + +/* + * IOCTL request handler to set/reset WAPI IE. + * + * The supplied WAPI IE is treated as a opaque buffer. Only the first field + * is checked to internally enable WAPI. If buffer length is zero, the existing + * WAPI IE is reset. + */ +static int mwifiex_set_wapi_ie(struct mwifiex_private *priv, + u8 *ie_data_ptr, u16 ie_len) +{ + if (ie_len) { + if (ie_len > sizeof(priv->wapi_ie)) { + dev_dbg(priv->adapter->dev, + "info: failed to copy WAPI IE, too big\n"); + return -1; + } + memcpy(priv->wapi_ie, ie_data_ptr, ie_len); + priv->wapi_ie_len = ie_len; + dev_dbg(priv->adapter->dev, "cmd: Set wapi_ie_len=%d IE=%#x\n", + priv->wapi_ie_len, priv->wapi_ie[0]); + + if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY) + priv->sec_info.wapi_enabled = true; + } else { + memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie)); + priv->wapi_ie_len = ie_len; + dev_dbg(priv->adapter->dev, + "info: Reset wapi_ie_len=%d IE=%#x\n", + priv->wapi_ie_len, priv->wapi_ie[0]); + priv->sec_info.wapi_enabled = false; + } + return 0; +} + +/* + * IOCTL request handler to set WAPI key. + * + * This function prepares the correct firmware command and + * issues it. + */ +static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_encrypt_key *encrypt_key) +{ + int ret = 0; + struct mwifiex_private *priv = adapter->priv[wait->bss_index]; + + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, + HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED, + wait, encrypt_key); + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set WEP network key. + * + * This function prepares the correct firmware command and + * issues it, after validation checks. + */ +static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_encrypt_key *encrypt_key) +{ + int ret = 0; + struct mwifiex_private *priv = adapter->priv[wait->bss_index]; + struct mwifiex_wep_key *wep_key = NULL; + int index; + + if (priv->wep_key_curr_index >= NUM_WEP_KEYS) + priv->wep_key_curr_index = 0; + wep_key = &priv->wep_key[priv->wep_key_curr_index]; + index = encrypt_key->key_index; + if (encrypt_key->key_disable) { + priv->sec_info.wep_status = MWIFIEX_802_11_WEP_DISABLED; + } else if (!encrypt_key->key_len) { + /* Copy the required key as the current key */ + wep_key = &priv->wep_key[index]; + if (!wep_key->key_length) { + dev_err(adapter->dev, + "key not set, so cannot enable it\n"); + return -1; + } + priv->wep_key_curr_index = (u16) index; + priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED; + } else { + wep_key = &priv->wep_key[index]; + /* Cleanup */ + memset(wep_key, 0, sizeof(struct mwifiex_wep_key)); + /* Copy the key in the driver */ + memcpy(wep_key->key_material, + encrypt_key->key_material, + encrypt_key->key_len); + wep_key->key_index = index; + wep_key->key_length = encrypt_key->key_len; + priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED; + } + if (wep_key->key_length) { + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, + HostCmd_ACT_GEN_SET, 0, NULL, NULL); + if (ret) + return ret; + } + if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED) + priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE; + else + priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE; + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL, + HostCmd_ACT_GEN_SET, 0, wait, + &priv->curr_pkt_filter); + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set WPA key. + * + * This function prepares the correct firmware command and + * issues it, after validation checks. + * + * Current driver only supports key length of up to 32 bytes. + * + * This function can also be used to disable a currently set key. + */ +static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_encrypt_key *encrypt_key) +{ + int ret = 0; + struct mwifiex_private *priv = adapter->priv[wait->bss_index]; + u8 remove_key = false; + struct host_cmd_ds_802_11_key_material *ibss_key; + + /* Current driver only supports key length of up to 32 bytes */ + if (encrypt_key->key_len > MWIFIEX_MAX_KEY_LENGTH) { + dev_err(adapter->dev, "key length too long\n"); + return -1; + } + + if (priv->bss_mode == NL80211_IFTYPE_ADHOC) { + /* + * IBSS/WPA-None uses only one key (Group) for both receiving + * and sending unicast and multicast packets. + */ + /* Send the key as PTK to firmware */ + encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST; + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, + HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED, + NULL, encrypt_key); + if (ret) + return ret; + + ibss_key = &priv->aes_key; + memset(ibss_key, 0, + sizeof(struct host_cmd_ds_802_11_key_material)); + /* Copy the key in the driver */ + memcpy(ibss_key->key_param_set.key, encrypt_key->key_material, + encrypt_key->key_len); + memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len, + sizeof(ibss_key->key_param_set.key_len)); + ibss_key->key_param_set.key_type_id + = cpu_to_le16(KEY_TYPE_ID_TKIP); + ibss_key->key_param_set.key_info + = cpu_to_le16(KEY_INFO_TKIP_ENABLED); + + /* Send the key as GTK to firmware */ + encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST; + } + + if (!encrypt_key->key_index) + encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST; + + if (remove_key) + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, + HostCmd_ACT_GEN_SET, + !(KEY_INFO_ENABLED), + wait, encrypt_key); + else + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL, + HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED, + wait, encrypt_key); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set/get network keys. + * + * This is a generic key handling function which supports WEP, WPA + * and WAPI. + */ +static int +mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_encrypt_key *encrypt_key) +{ + int status = 0; + struct mwifiex_adapter *adapter = priv->adapter; + + if (encrypt_key->is_wapi_key) + status = mwifiex_sec_ioctl_set_wapi_key(adapter, wait, + encrypt_key); + else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104) + status = mwifiex_sec_ioctl_set_wpa_key(adapter, wait, + encrypt_key); + else + status = mwifiex_sec_ioctl_set_wep_key(adapter, wait, + encrypt_key); + return status; +} + +/* + * This function returns the driver version. + */ +int +mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version, + int max_len) +{ + union { + u32 l; + u8 c[4]; + } ver; + char fw_ver[32]; + + ver.l = adapter->fw_release_number; + sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]); + + snprintf(version, max_len, driver_version, fw_ver); + + dev_dbg(adapter->dev, "info: MWIFIEX VERSION: %s\n", version); + + return 0; +} + +/* + * Sends IOCTL request to set Tx power. It can be set to either auto + * or a fixed value. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_set_tx_power(struct mwifiex_private *priv, int type, int dbm) +{ + struct mwifiex_power_cfg power_cfg; + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + int ret = 0; + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + if (type == NL80211_TX_POWER_FIXED) { + power_cfg.is_power_auto = 0; + power_cfg.power_level = dbm; + } else { + power_cfg.is_power_auto = 1; + } + status = mwifiex_power_ioctl_set_power(priv, wait, &power_cfg); + + ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT); + + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to get scan table. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_get_scan_table(struct mwifiex_private *priv, u8 wait_option, + struct mwifiex_scan_resp *scan_resp) +{ + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_scan_resp scan; + int status = 0; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + status = mwifiex_scan_networks(priv, wait, HostCmd_ACT_GEN_GET, + NULL, &scan); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + if (!status) { + if (scan_resp) + memcpy(scan_resp, &scan, + sizeof(struct mwifiex_scan_resp)); + } + + if (wait && (status != -EINPROGRESS)) + kfree(wait); + return status; +} + +/* + * Sends IOCTL request to get signal information. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_get_signal_info(struct mwifiex_private *priv, u8 wait_option, + struct mwifiex_ds_get_signal *signal) +{ + struct mwifiex_ds_get_signal info; + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + info.selector = ALL_RSSI_INFO_MASK; + + status = mwifiex_get_info_signal(priv, wait, &info); + + status = mwifiex_request_ioctl(priv, wait, status, wait_option); + if (!status) { + if (signal) + memcpy(signal, &info, + sizeof(struct mwifiex_ds_get_signal)); + if (info.selector & BCN_RSSI_AVG_MASK) + priv->w_stats.qual.level = info.bcn_rssi_avg; + if (info.selector & BCN_NF_AVG_MASK) + priv->w_stats.qual.noise = info.bcn_nf_avg; + } + + if (wait && (status != -EINPROGRESS)) + kfree(wait); + return status; +} + +/* + * Sends IOCTL request to set encoding parameters. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int mwifiex_set_encode(struct mwifiex_private *priv, const u8 *key, + int key_len, u8 key_index, int disable) +{ + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ds_encrypt_key encrypt_key; + int status = 0; + int ret = 0; + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key)); + encrypt_key.key_len = key_len; + if (!disable) { + encrypt_key.key_index = key_index; + if (key_len) + memcpy(encrypt_key.key_material, key, key_len); + } else { + encrypt_key.key_disable = true; + } + + status = mwifiex_sec_ioctl_encrypt_key(priv, wait, &encrypt_key); + + if (mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT)) + ret = -EFAULT; + + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to set power management parameters. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_drv_set_power(struct mwifiex_private *priv, bool power_on) +{ + int ret = 0; + int status = 0; + struct mwifiex_wait_queue *wait = NULL; + u32 ps_mode; + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + ps_mode = power_on; + status = mwifiex_pm_ioctl_ps_mode(priv, wait, &ps_mode, + HostCmd_ACT_GEN_SET); + + ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT); + + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to get extended version. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_get_ver_ext(struct mwifiex_private *priv) +{ + struct mwifiex_ver_ext ver_ext; + struct mwifiex_wait_queue *wait = NULL; + int status = 0; + int ret = 0; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + /* get fw version */ + memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext)); + status = mwifiex_get_info_ver_ext(priv, wait, &ver_ext); + + ret = mwifiex_request_ioctl(priv, wait, status, wait_option); + + if (ret) + ret = -1; + + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to get statistics information. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_get_stats_info(struct mwifiex_private *priv, + struct mwifiex_ds_get_stats *log) +{ + int ret = 0; + int status = 0; + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ds_get_stats get_log; + u8 wait_option = MWIFIEX_IOCTL_WAIT; + + /* Allocate wait buffer */ + wait = mwifiex_alloc_fill_wait_queue(priv, wait_option); + if (!wait) + return -ENOMEM; + + memset(&get_log, 0, sizeof(struct mwifiex_ds_get_stats)); + status = mwifiex_get_info_stats(priv, wait, &get_log); + + /* Send IOCTL request to MWIFIEX */ + ret = mwifiex_request_ioctl(priv, wait, status, wait_option); + if (!ret) { + if (log) + memcpy(log, &get_log, sizeof(struct + mwifiex_ds_get_stats)); + priv->w_stats.discard.fragment = get_log.fcs_error; + priv->w_stats.discard.retries = get_log.retry; + priv->w_stats.discard.misc = get_log.ack_failure; + } + + kfree(wait); + return ret; +} + +/* + * IOCTL request handler to read/write register. + * + * This function prepares the correct firmware command and + * issues it. + * + * Access to the following registers are supported - + * - MAC + * - BBP + * - RF + * - PMIC + * - CAU + */ +static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_reg_rw *reg_rw, + u16 action) +{ + int ret = 0; + u16 cmd_no; + + switch (le32_to_cpu(reg_rw->type)) { + case MWIFIEX_REG_MAC: + cmd_no = HostCmd_CMD_MAC_REG_ACCESS; + break; + case MWIFIEX_REG_BBP: + cmd_no = HostCmd_CMD_BBP_REG_ACCESS; + break; + case MWIFIEX_REG_RF: + cmd_no = HostCmd_CMD_RF_REG_ACCESS; + break; + case MWIFIEX_REG_PMIC: + cmd_no = HostCmd_CMD_PMIC_REG_ACCESS; + break; + case MWIFIEX_REG_CAU: + cmd_no = HostCmd_CMD_CAU_REG_ACCESS; + break; + default: + return -1; + } + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, cmd_no, action, 0, wait, reg_rw); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * Sends IOCTL request to write to a register. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type, + u32 reg_offset, u32 reg_value) +{ + int ret = 0; + int status = 0; + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ds_reg_rw reg_rw; + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + reg_rw.type = cpu_to_le32(reg_type); + reg_rw.offset = cpu_to_le32(reg_offset); + reg_rw.value = cpu_to_le32(reg_value); + status = mwifiex_reg_mem_ioctl_reg_rw(priv, wait, ®_rw, + HostCmd_ACT_GEN_SET); + + ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT); + + kfree(wait); + return ret; +} + +/* + * Sends IOCTL request to read from a register. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type, + u32 reg_offset, u32 *value) +{ + int ret = 0; + int status = 0; + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ds_reg_rw reg_rw; + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + reg_rw.type = cpu_to_le32(reg_type); + reg_rw.offset = cpu_to_le32(reg_offset); + status = mwifiex_reg_mem_ioctl_reg_rw(priv, wait, ®_rw, + HostCmd_ACT_GEN_GET); + + ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT); + if (ret) + goto done; + + *value = le32_to_cpu(reg_rw.value); + +done: + kfree(wait); + return ret; +} + +/* + * IOCTL request handler to read EEPROM. + * + * This function prepares the correct firmware command and + * issues it. + */ +static int +mwifiex_reg_mem_ioctl_read_eeprom(struct mwifiex_private *priv, + struct mwifiex_wait_queue *wait, + struct mwifiex_ds_read_eeprom *rd_eeprom) +{ + int ret = 0; + + /* Send request to firmware */ + ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_EEPROM_ACCESS, + HostCmd_ACT_GEN_GET, 0, wait, rd_eeprom); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * Sends IOCTL request to read from EEPROM. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes, + u8 *value) +{ + int ret = 0; + int status = 0; + struct mwifiex_wait_queue *wait = NULL; + struct mwifiex_ds_read_eeprom rd_eeprom; + + wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT); + if (!wait) + return -ENOMEM; + + rd_eeprom.offset = cpu_to_le16((u16) offset); + rd_eeprom.byte_count = cpu_to_le16((u16) bytes); + status = mwifiex_reg_mem_ioctl_read_eeprom(priv, wait, &rd_eeprom); + + ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT); + if (ret) + goto done; + + memcpy(value, rd_eeprom.value, MAX_EEPROM_DATA); +done: + kfree(wait); + return ret; +} + +/* + * This function sets a generic IE. In addition to generic IE, it can + * also handle WPA, WPA2 and WAPI IEs. + */ +static int +mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr, + u16 ie_len) +{ + int ret = 0; + struct ieee_types_vendor_header *pvendor_ie; + const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 }; + const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 }; + + /* If the passed length is zero, reset the buffer */ + if (!ie_len) { + priv->gen_ie_buf_len = 0; + priv->wps.session_enable = false; + + return 0; + } else if (!ie_data_ptr) { + return -1; + } + pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr; + /* Test to see if it is a WPA IE, if not, then it is a gen IE */ + if (((pvendor_ie->element_id == WLAN_EID_WPA) + && (!memcmp(pvendor_ie->oui, wpa_oui, sizeof(wpa_oui)))) + || (pvendor_ie->element_id == WLAN_EID_RSN)) { + + /* IE is a WPA/WPA2 IE so call set_wpa function */ + ret = mwifiex_set_wpa_ie_helper(priv, ie_data_ptr, ie_len); + priv->wps.session_enable = false; + + return ret; + } else if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) { + /* IE is a WAPI IE so call set_wapi function */ + ret = mwifiex_set_wapi_ie(priv, ie_data_ptr, ie_len); + + return ret; + } + /* + * Verify that the passed length is not larger than the + * available space remaining in the buffer + */ + if (ie_len < (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) { + + /* Test to see if it is a WPS IE, if so, enable + * wps session flag + */ + pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr; + if ((pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC) + && (!memcmp(pvendor_ie->oui, wps_oui, + sizeof(wps_oui)))) { + priv->wps.session_enable = true; + dev_dbg(priv->adapter->dev, + "info: WPS Session Enabled.\n"); + } + + /* Append the passed data to the end of the + genIeBuffer */ + memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len, ie_data_ptr, + ie_len); + /* Increment the stored buffer length by the + size passed */ + priv->gen_ie_buf_len += ie_len; + } else { + /* Passed data does not fit in the remaining + buffer space */ + ret = -1; + } + + /* Return 0, or -1 for error case */ + return ret; +} + +/* + * IOCTL request handler to set/get generic IE. + * + * In addition to various generic IEs, this function can also be + * used to set the ARP filter. + */ +static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv, + struct mwifiex_ds_misc_gen_ie *gen_ie, + u16 action) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + switch (gen_ie->type) { + case MWIFIEX_IE_TYPE_GEN_IE: + if (action == HostCmd_ACT_GEN_GET) { + gen_ie->len = priv->wpa_ie_len; + memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len); + } else { + mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data, + (u16) gen_ie->len); + } + break; + case MWIFIEX_IE_TYPE_ARP_FILTER: + memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter)); + if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) { + adapter->arp_filter_size = 0; + dev_err(adapter->dev, "invalid ARP filter size\n"); + return -1; + } else { + memcpy(adapter->arp_filter, gen_ie->ie_data, + gen_ie->len); + adapter->arp_filter_size = gen_ie->len; + } + break; + default: + dev_err(adapter->dev, "invalid IE type\n"); + return -1; + } + return 0; +} + +/* + * Sends IOCTL request to set a generic IE. + * + * This function allocates the IOCTL request buffer, fills it + * with requisite parameters and calls the IOCTL handler. + */ +int +mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len) +{ + struct mwifiex_ds_misc_gen_ie gen_ie; + int status = 0; + + if (ie_len > IW_CUSTOM_MAX) + return -EFAULT; + + gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE; + gen_ie.len = ie_len; + memcpy(gen_ie.ie_data, ie, ie_len); + status = mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET); + if (status) + return -EFAULT; + + return 0; +} diff --git a/drivers/net/wireless/mwifiex/sta_rx.c b/drivers/net/wireless/mwifiex/sta_rx.c new file mode 100644 index 000000000000..8282679e64fd --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_rx.c @@ -0,0 +1,182 @@ +/* + * Marvell Wireless LAN device driver: station RX data handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "11n_aggr.h" +#include "11n_rxreorder.h" + +/* + * This function processes the received packet and forwards it + * to kernel/upper layer. + * + * This function parses through the received packet and determines + * if it is a debug packet or normal packet. + * + * For non-debug packets, the function chops off unnecessary leading + * header bytes, reconstructs the packet as an ethernet frame or + * 802.2/llc/snap frame as required, and sends it to kernel/upper layer. + * + * The completion callback is called after processing in complete. + */ +int mwifiex_process_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + int ret = 0; + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + struct mwifiex_private *priv = adapter->priv[rx_info->bss_index]; + struct rx_packet_hdr *rx_pkt_hdr; + struct rxpd *local_rx_pd; + int hdr_chop; + struct ethhdr *eth_hdr; + u8 rfc1042_eth_hdr[ETH_ALEN] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; + + local_rx_pd = (struct rxpd *) (skb->data); + + rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd + + local_rx_pd->rx_pkt_offset); + + if (!memcmp(&rx_pkt_hdr->rfc1042_hdr, + rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr))) { + /* + * Replace the 803 header and rfc1042 header (llc/snap) with an + * EthernetII header, keep the src/dst and snap_type + * (ethertype). + * The firmware only passes up SNAP frames converting + * all RX Data from 802.11 to 802.2/LLC/SNAP frames. + * To create the Ethernet II, just move the src, dst address + * right before the snap_type. + */ + eth_hdr = (struct ethhdr *) + ((u8 *) &rx_pkt_hdr->eth803_hdr + + sizeof(rx_pkt_hdr->eth803_hdr) + + sizeof(rx_pkt_hdr->rfc1042_hdr) + - sizeof(rx_pkt_hdr->eth803_hdr.h_dest) + - sizeof(rx_pkt_hdr->eth803_hdr.h_source) + - sizeof(rx_pkt_hdr->rfc1042_hdr.snap_type)); + + memcpy(eth_hdr->h_source, rx_pkt_hdr->eth803_hdr.h_source, + sizeof(eth_hdr->h_source)); + memcpy(eth_hdr->h_dest, rx_pkt_hdr->eth803_hdr.h_dest, + sizeof(eth_hdr->h_dest)); + + /* Chop off the rxpd + the excess memory from the 802.2/llc/snap + header that was removed. */ + hdr_chop = (u8 *) eth_hdr - (u8 *) local_rx_pd; + } else { + /* Chop off the rxpd */ + hdr_chop = (u8 *) &rx_pkt_hdr->eth803_hdr - + (u8 *) local_rx_pd; + } + + /* Chop off the leading header bytes so the it points to the start of + either the reconstructed EthII frame or the 802.2/llc/snap frame */ + skb_pull(skb, hdr_chop); + + priv->rxpd_rate = local_rx_pd->rx_rate; + + priv->rxpd_htinfo = local_rx_pd->ht_info; + + ret = mwifiex_recv_packet(adapter, skb); + if (ret == -1) + dev_err(adapter->dev, "recv packet failed\n"); + + return ret; +} + +/* + * This function processes the received buffer. + * + * The function looks into the RxPD and performs sanity tests on the + * received buffer to ensure its a valid packet, before processing it + * further. If the packet is determined to be aggregated, it is + * de-aggregated accordingly. Non-unicast packets are sent directly to + * the kernel/upper layers. Unicast packets are handed over to the + * Rx reordering routine if 11n is enabled. + * + * The completion callback is called after processing in complete. + */ +int mwifiex_process_sta_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + int ret = 0; + struct rxpd *local_rx_pd; + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + struct rx_packet_hdr *rx_pkt_hdr; + u8 ta[ETH_ALEN]; + u16 rx_pkt_type = 0; + struct mwifiex_private *priv = adapter->priv[rx_info->bss_index]; + + local_rx_pd = (struct rxpd *) (skb->data); + rx_pkt_type = local_rx_pd->rx_pkt_type; + + rx_pkt_hdr = (struct rx_packet_hdr *) ((u8 *) local_rx_pd + + local_rx_pd->rx_pkt_offset); + + if ((local_rx_pd->rx_pkt_offset + local_rx_pd->rx_pkt_length) > + (u16) skb->len) { + dev_err(adapter->dev, "wrong rx packet: len=%d," + " rx_pkt_offset=%d, rx_pkt_length=%d\n", skb->len, + local_rx_pd->rx_pkt_offset, local_rx_pd->rx_pkt_length); + priv->stats.rx_dropped++; + dev_kfree_skb_any(skb); + return ret; + } + if (local_rx_pd->rx_pkt_type == PKT_TYPE_AMSDU) { + mwifiex_11n_deaggregate_pkt(priv, skb); + return ret; + } + /* + * If the packet is not an unicast packet then send the packet + * directly to os. Don't pass thru rx reordering + */ + if (!IS_11N_ENABLED(priv) || + memcmp(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest, ETH_ALEN)) { + mwifiex_process_rx_packet(adapter, skb); + return ret; + } + + if (mwifiex_queuing_ra_based(priv)) { + memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN); + } else { + if (rx_pkt_type != PKT_TYPE_BAR) + priv->rx_seq[local_rx_pd->priority] = + local_rx_pd->seq_num; + memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address, + ETH_ALEN); + } + + /* Reorder and send to OS */ + ret = mwifiex_11n_rx_reorder_pkt(priv, local_rx_pd->seq_num, + local_rx_pd->priority, ta, + (u8) local_rx_pd->rx_pkt_type, + (void *) skb); + + if (ret || (rx_pkt_type == PKT_TYPE_BAR)) { + if (priv && (ret == -1)) + priv->stats.rx_dropped++; + + dev_kfree_skb_any(skb); + } + + return ret; +} diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c new file mode 100644 index 000000000000..e8db6bd021c6 --- /dev/null +++ b/drivers/net/wireless/mwifiex/sta_tx.c @@ -0,0 +1,202 @@ +/* + * Marvell Wireless LAN device driver: station TX data handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" + +/* + * This function fills the TxPD for tx packets. + * + * The Tx buffer received by this function should already have the + * header space allocated for TxPD. + * + * This function inserts the TxPD in between interface header and actual + * data and adjusts the buffer pointers accordingly. + * + * The following TxPD fields are set by this function, as required - + * - BSS number + * - Tx packet length and offset + * - Priority + * - Packet delay + * - Priority specific Tx control + * - Flags + */ +void *mwifiex_process_sta_txpd(struct mwifiex_private *priv, + struct sk_buff *skb) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct txpd *local_tx_pd; + struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb); + + if (!skb->len) { + dev_err(adapter->dev, "Tx: bad packet length: %d\n", + skb->len); + tx_info->status_code = MWIFIEX_ERROR_PKT_SIZE_INVALID; + return skb->data; + } + + BUG_ON(skb_headroom(skb) < (sizeof(*local_tx_pd) + INTF_HEADER_LEN)); + skb_push(skb, sizeof(*local_tx_pd)); + + local_tx_pd = (struct txpd *) skb->data; + memset(local_tx_pd, 0, sizeof(struct txpd)); + local_tx_pd->bss_num = priv->bss_num; + local_tx_pd->bss_type = priv->bss_type; + local_tx_pd->tx_pkt_length = cpu_to_le16((u16) (skb->len - + sizeof(struct txpd))); + + local_tx_pd->priority = (u8) skb->priority; + local_tx_pd->pkt_delay_2ms = + mwifiex_wmm_compute_drv_pkt_delay(priv, skb); + + if (local_tx_pd->priority < + ARRAY_SIZE(priv->wmm.user_pri_pkt_tx_ctrl)) + /* + * Set the priority specific tx_control field, setting of 0 will + * cause the default value to be used later in this function + */ + local_tx_pd->tx_control = + cpu_to_le32(priv->wmm.user_pri_pkt_tx_ctrl[local_tx_pd-> + priority]); + + if (adapter->pps_uapsd_mode) { + if (mwifiex_check_last_packet_indication(priv)) { + adapter->tx_lock_flag = true; + local_tx_pd->flags = + MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET; + } + } + + /* Offset of actual data */ + local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd)); + + /* make space for INTF_HEADER_LEN */ + skb_push(skb, INTF_HEADER_LEN); + + if (!local_tx_pd->tx_control) + /* TxCtrl set by user or default */ + local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl); + + return skb->data; +} + +/* + * This function tells firmware to send a NULL data packet. + * + * The function creates a NULL data packet with TxPD and sends to the + * firmware for transmission, with highest priority setting. + */ +int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct txpd *local_tx_pd; +/* sizeof(struct txpd) + Interface specific header */ +#define NULL_PACKET_HDR 64 + u32 data_len = NULL_PACKET_HDR; + struct sk_buff *skb = NULL; + int ret = 0; + struct mwifiex_txinfo *tx_info = NULL; + + if (adapter->surprise_removed) + return -1; + + if (!priv->media_connected) + return -1; + + if (adapter->data_sent) + return -1; + + skb = dev_alloc_skb(data_len); + if (!skb) + return -1; + + tx_info = MWIFIEX_SKB_TXCB(skb); + tx_info->bss_index = priv->bss_index; + skb_reserve(skb, sizeof(struct txpd) + INTF_HEADER_LEN); + skb_push(skb, sizeof(struct txpd)); + + local_tx_pd = (struct txpd *) skb->data; + local_tx_pd->tx_control = cpu_to_le32(priv->pkt_tx_ctrl); + local_tx_pd->flags = flags; + local_tx_pd->priority = WMM_HIGHEST_PRIORITY; + local_tx_pd->tx_pkt_offset = cpu_to_le16(sizeof(struct txpd)); + local_tx_pd->bss_num = priv->bss_num; + local_tx_pd->bss_type = priv->bss_type; + + skb_push(skb, INTF_HEADER_LEN); + + ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA, + skb->data, skb->len, NULL); + switch (ret) { + case -EBUSY: + adapter->data_sent = true; + /* Fall through FAILURE handling */ + case -1: + dev_kfree_skb_any(skb); + dev_err(adapter->dev, "%s: host_to_card failed: ret=%d\n", + __func__, ret); + adapter->dbg.num_tx_host_to_card_failure++; + break; + case 0: + dev_kfree_skb_any(skb); + dev_dbg(adapter->dev, "data: %s: host_to_card succeeded\n", + __func__); + adapter->tx_lock_flag = true; + break; + case -EINPROGRESS: + break; + default: + break; + } + + return ret; +} + +/* + * This function checks if we need to send last packet indication. + */ +u8 +mwifiex_check_last_packet_indication(struct mwifiex_private *priv) +{ + struct mwifiex_adapter *adapter = priv->adapter; + u8 ret = false; + u8 prop_ps = true; + + if (!adapter->sleep_period.period) + return ret; + if (mwifiex_wmm_lists_empty(adapter)) { + if ((priv->curr_bss_params.wmm_uapsd_enabled && + priv->wmm_qosinfo) || prop_ps) + ret = true; + } + + if (ret && !adapter->cmd_sent && !adapter->curr_cmd + && !is_command_pending(adapter)) { + adapter->delay_null_pkt = false; + ret = true; + } else { + ret = false; + adapter->delay_null_pkt = true; + } + return ret; +} diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c new file mode 100644 index 000000000000..f06923cb1c4b --- /dev/null +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -0,0 +1,202 @@ +/* + * Marvell Wireless LAN device driver: generic TX/RX data handling + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" + +/* + * This function processes the received buffer. + * + * Main responsibility of this function is to parse the RxPD to + * identify the correct interface this packet is headed for and + * forwarding it to the associated handling function, where the + * packet will be further processed and sent to kernel/upper layer + * if required. + */ +int mwifiex_handle_rx_packet(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + int ret = 0; + struct mwifiex_private *priv = + mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + struct rxpd *local_rx_pd; + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + + local_rx_pd = (struct rxpd *) (skb->data); + /* Get the BSS number from rxpd, get corresponding priv */ + priv = mwifiex_get_priv_by_id(adapter, local_rx_pd->bss_num & + BSS_NUM_MASK, local_rx_pd->bss_type); + if (!priv) + priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY); + + rx_info->bss_index = priv->bss_index; + ret = mwifiex_process_sta_rx_packet(adapter, skb); + + return ret; +} +EXPORT_SYMBOL_GPL(mwifiex_handle_rx_packet); + +/* + * This function sends a packet to device. + * + * It processes the packet to add the TxPD, checks condition and + * sends the processed packet to firmware for transmission. + * + * On successful completion, the function calls the completion callback + * and logs the time. + */ +int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb, + struct mwifiex_tx_param *tx_param) +{ + int ret = -1; + struct mwifiex_adapter *adapter = priv->adapter; + u8 *head_ptr = NULL; + struct txpd *local_tx_pd = NULL; + + head_ptr = (u8 *) mwifiex_process_sta_txpd(priv, skb); + if (head_ptr) { + if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) + local_tx_pd = + (struct txpd *) (head_ptr + INTF_HEADER_LEN); + + ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA, + skb->data, skb->len, tx_param); + } + + switch (ret) { + case -EBUSY: + if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) && + (adapter->pps_uapsd_mode) && + (adapter->tx_lock_flag)) { + priv->adapter->tx_lock_flag = false; + local_tx_pd->flags = 0; + } + dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); + break; + case -1: + adapter->data_sent = false; + dev_err(adapter->dev, "mwifiex_write_data_async failed: 0x%X\n", + ret); + adapter->dbg.num_tx_host_to_card_failure++; + mwifiex_write_data_complete(adapter, skb, ret); + break; + case -EINPROGRESS: + adapter->data_sent = false; + break; + case 0: + mwifiex_write_data_complete(adapter, skb, ret); + break; + default: + break; + } + + return ret; +} + +/* + * Packet send completion callback handler. + * + * It either frees the buffer directly or forwards it to another + * completion callback which checks conditions, updates statistics, + * wakes up stalled traffic queue if required, and then frees the buffer. + */ +int mwifiex_write_data_complete(struct mwifiex_adapter *adapter, + struct sk_buff *skb, int status) +{ + struct mwifiex_private *priv = NULL, *tpriv = NULL; + struct mwifiex_txinfo *tx_info = NULL; + int i; + + if (!skb) + return 0; + + tx_info = MWIFIEX_SKB_TXCB(skb); + priv = mwifiex_bss_index_to_priv(adapter, tx_info->bss_index); + if (!priv) + goto done; + + priv->netdev->trans_start = jiffies; + if (!status) { + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len; + } else { + priv->stats.tx_errors++; + } + atomic_dec(&adapter->tx_pending); + + for (i = 0; i < adapter->priv_num; i++) { + + tpriv = adapter->priv[i]; + + if ((GET_BSS_ROLE(tpriv) == MWIFIEX_BSS_ROLE_STA) + && (tpriv->media_connected)) { + if (netif_queue_stopped(tpriv->netdev)) + netif_wake_queue(tpriv->netdev); + } + } +done: + dev_kfree_skb_any(skb); + + return 0; +} + +/* + * Packet receive completion callback handler. + * + * This function calls another completion callback handler which + * updates the statistics, and optionally updates the parent buffer + * use count before freeing the received packet. + */ +int mwifiex_recv_packet_complete(struct mwifiex_adapter *adapter, + struct sk_buff *skb, int status) +{ + struct mwifiex_rxinfo *rx_info = MWIFIEX_SKB_RXCB(skb); + struct mwifiex_rxinfo *rx_info_parent = NULL; + struct mwifiex_private *priv; + struct sk_buff *skb_parent = NULL; + unsigned long flags; + + priv = adapter->priv[rx_info->bss_index]; + + if (priv && (status == -1)) + priv->stats.rx_dropped++; + + if (rx_info->parent) { + skb_parent = rx_info->parent; + rx_info_parent = MWIFIEX_SKB_RXCB(skb_parent); + + spin_lock_irqsave(&priv->rx_pkt_lock, flags); + --rx_info_parent->use_count; + + if (!rx_info_parent->use_count) { + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + dev_kfree_skb_any(skb_parent); + } else { + spin_unlock_irqrestore(&priv->rx_pkt_lock, flags); + } + } else { + dev_kfree_skb_any(skb); + } + + return 0; +} diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c new file mode 100644 index 000000000000..205022aa52f5 --- /dev/null +++ b/drivers/net/wireless/mwifiex/util.c @@ -0,0 +1,252 @@ +/* + * Marvell Wireless LAN device driver: utility functions + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + +/* + * Firmware initialization complete callback handler. + * + * This function wakes up the function waiting on the init + * wait queue for the firmware initialization to complete. + */ +int mwifiex_init_fw_complete(struct mwifiex_adapter *adapter) +{ + + adapter->init_wait_q_woken = true; + wake_up_interruptible(&adapter->init_wait_q); + return 0; +} + +/* + * Firmware shutdown complete callback handler. + * + * This function sets the hardware status to not ready and wakes up + * the function waiting on the init wait queue for the firmware + * shutdown to complete. + */ +int mwifiex_shutdown_fw_complete(struct mwifiex_adapter *adapter) +{ + adapter->hw_status = MWIFIEX_HW_STATUS_NOT_READY; + adapter->init_wait_q_woken = true; + wake_up_interruptible(&adapter->init_wait_q); + return 0; +} + +/* + * IOCTL request handler to send function init/shutdown command + * to firmware. + * + * This function prepares the correct firmware command and + * issues it. + */ +int mwifiex_misc_ioctl_init_shutdown(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait, + u32 func_init_shutdown) +{ + struct mwifiex_private *priv = adapter->priv[wait->bss_index]; + int ret; + u16 cmd; + + if (func_init_shutdown == MWIFIEX_FUNC_INIT) { + cmd = HostCmd_CMD_FUNC_INIT; + } else if (func_init_shutdown == MWIFIEX_FUNC_SHUTDOWN) { + cmd = HostCmd_CMD_FUNC_SHUTDOWN; + } else { + dev_err(adapter->dev, "unsupported parameter\n"); + return -1; + } + + /* Send command to firmware */ + ret = mwifiex_prepare_cmd(priv, cmd, HostCmd_ACT_GEN_SET, + 0, wait, NULL); + + if (!ret) + ret = -EINPROGRESS; + + return ret; +} + +/* + * IOCTL request handler to set/get debug information. + * + * This function collates/sets the information from/to different driver + * structures. + */ +int mwifiex_get_debug_info(struct mwifiex_private *priv, + struct mwifiex_debug_info *info) +{ + struct mwifiex_adapter *adapter = priv->adapter; + + if (info) { + memcpy(info->packets_out, + priv->wmm.packets_out, + sizeof(priv->wmm.packets_out)); + info->max_tx_buf_size = (u32) adapter->max_tx_buf_size; + info->tx_buf_size = (u32) adapter->tx_buf_size; + info->rx_tbl_num = mwifiex_get_rx_reorder_tbl( + priv, info->rx_tbl); + info->tx_tbl_num = mwifiex_get_tx_ba_stream_tbl( + priv, info->tx_tbl); + info->ps_mode = adapter->ps_mode; + info->ps_state = adapter->ps_state; + info->is_deep_sleep = adapter->is_deep_sleep; + info->pm_wakeup_card_req = adapter->pm_wakeup_card_req; + info->pm_wakeup_fw_try = adapter->pm_wakeup_fw_try; + info->is_hs_configured = adapter->is_hs_configured; + info->hs_activated = adapter->hs_activated; + info->num_cmd_host_to_card_failure + = adapter->dbg.num_cmd_host_to_card_failure; + info->num_cmd_sleep_cfm_host_to_card_failure + = adapter->dbg.num_cmd_sleep_cfm_host_to_card_failure; + info->num_tx_host_to_card_failure + = adapter->dbg.num_tx_host_to_card_failure; + info->num_event_deauth = adapter->dbg.num_event_deauth; + info->num_event_disassoc = adapter->dbg.num_event_disassoc; + info->num_event_link_lost = adapter->dbg.num_event_link_lost; + info->num_cmd_deauth = adapter->dbg.num_cmd_deauth; + info->num_cmd_assoc_success = + adapter->dbg.num_cmd_assoc_success; + info->num_cmd_assoc_failure = + adapter->dbg.num_cmd_assoc_failure; + info->num_tx_timeout = adapter->dbg.num_tx_timeout; + info->num_cmd_timeout = adapter->dbg.num_cmd_timeout; + info->timeout_cmd_id = adapter->dbg.timeout_cmd_id; + info->timeout_cmd_act = adapter->dbg.timeout_cmd_act; + memcpy(info->last_cmd_id, adapter->dbg.last_cmd_id, + sizeof(adapter->dbg.last_cmd_id)); + memcpy(info->last_cmd_act, adapter->dbg.last_cmd_act, + sizeof(adapter->dbg.last_cmd_act)); + info->last_cmd_index = adapter->dbg.last_cmd_index; + memcpy(info->last_cmd_resp_id, adapter->dbg.last_cmd_resp_id, + sizeof(adapter->dbg.last_cmd_resp_id)); + info->last_cmd_resp_index = adapter->dbg.last_cmd_resp_index; + memcpy(info->last_event, adapter->dbg.last_event, + sizeof(adapter->dbg.last_event)); + info->last_event_index = adapter->dbg.last_event_index; + info->data_sent = adapter->data_sent; + info->cmd_sent = adapter->cmd_sent; + info->cmd_resp_received = adapter->cmd_resp_received; + } + + return 0; +} + +/* + * This function processes the received packet before sending it to the + * kernel. + * + * It extracts the SKB from the received buffer and sends it to kernel. + * In case the received buffer does not contain the data in SKB format, + * the function creates a blank SKB, fills it with the data from the + * received buffer and then sends this new SKB to the kernel. + */ +int mwifiex_recv_packet(struct mwifiex_adapter *adapter, struct sk_buff *skb) +{ + struct mwifiex_rxinfo *rx_info = NULL; + struct mwifiex_private *priv = NULL; + + if (!skb) + return -1; + + rx_info = MWIFIEX_SKB_RXCB(skb); + priv = mwifiex_bss_index_to_priv(adapter, rx_info->bss_index); + if (!priv) + return -1; + + skb->dev = priv->netdev; + skb->protocol = eth_type_trans(skb, priv->netdev); + skb->ip_summed = CHECKSUM_NONE; + priv->stats.rx_bytes += skb->len; + priv->stats.rx_packets++; + if (in_interrupt()) + netif_rx(skb); + else + netif_rx_ni(skb); + + return 0; +} + +/* + * Receive packet completion callback handler. + * + * This function updates the statistics and frees the buffer SKB. + */ +int mwifiex_recv_complete(struct mwifiex_adapter *adapter, + struct sk_buff *skb, int status) +{ + struct mwifiex_private *priv = NULL; + struct mwifiex_rxinfo *rx_info = NULL; + + if (!skb) + return 0; + + rx_info = MWIFIEX_SKB_RXCB(skb); + priv = mwifiex_bss_index_to_priv(adapter, rx_info->bss_index); + + if (priv && (status == -1)) + priv->stats.rx_dropped++; + + dev_kfree_skb_any(skb); + + return 0; +} + +/* + * IOCTL completion callback handler. + * + * This function is called when a pending IOCTL is completed. + * + * If work queue support is enabled, the function wakes up the + * corresponding waiting function. Otherwise, it processes the + * IOCTL response and frees the response buffer. + */ +int mwifiex_ioctl_complete(struct mwifiex_adapter *adapter, + struct mwifiex_wait_queue *wait_queue, + int status) +{ + enum mwifiex_error_code status_code = + (enum mwifiex_error_code) wait_queue->status; + + atomic_dec(&adapter->ioctl_pending); + + dev_dbg(adapter->dev, "cmd: IOCTL completed: status=%d," + " status_code=%#x\n", status, status_code); + + if (wait_queue->enabled) { + *wait_queue->condition = true; + wait_queue->status = status; + if (status && (status_code == MWIFIEX_ERROR_CMD_TIMEOUT)) + dev_err(adapter->dev, "cmd timeout\n"); + else + wake_up_interruptible(wait_queue->wait); + } else { + if (status) + dev_err(adapter->dev, "cmd failed: status_code=%#x\n", + status_code); + kfree(wait_queue); + } + + return 0; +} diff --git a/drivers/net/wireless/mwifiex/util.h b/drivers/net/wireless/mwifiex/util.h new file mode 100644 index 000000000000..9506afc6c0e4 --- /dev/null +++ b/drivers/net/wireless/mwifiex/util.h @@ -0,0 +1,32 @@ +/* + * Marvell Wireless LAN device driver: utility functions + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_UTIL_H_ +#define _MWIFIEX_UTIL_H_ + +static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb) +{ + return (struct mwifiex_rxinfo *)skb->cb; +} + +static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb) +{ + return (struct mwifiex_txinfo *)skb->cb; +} +#endif /* !_MWIFIEX_UTIL_H_ */ diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c new file mode 100644 index 000000000000..1cfbc6bed692 --- /dev/null +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -0,0 +1,1237 @@ +/* + * Marvell Wireless LAN device driver: WMM + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#include "decl.h" +#include "ioctl.h" +#include "util.h" +#include "fw.h" +#include "main.h" +#include "wmm.h" +#include "11n.h" + + +/* Maximum value FW can accept for driver delay in packet transmission */ +#define DRV_PKT_DELAY_TO_FW_MAX 512 + + +#define WMM_QUEUED_PACKET_LOWER_LIMIT 180 + +#define WMM_QUEUED_PACKET_UPPER_LIMIT 200 + +/* Offset for TOS field in the IP header */ +#define IPTOS_OFFSET 5 + +/* WMM information IE */ +static const u8 wmm_info_ie[] = { WLAN_EID_VENDOR_SPECIFIC, 0x07, + 0x00, 0x50, 0xf2, 0x02, + 0x00, 0x01, 0x00 +}; + +static const u8 wmm_aci_to_qidx_map[] = { WMM_AC_BE, + WMM_AC_BK, + WMM_AC_VI, + WMM_AC_VO +}; + +static u8 tos_to_tid[] = { + /* TID DSCP_P2 DSCP_P1 DSCP_P0 WMM_AC */ + 0x01, /* 0 1 0 AC_BK */ + 0x02, /* 0 0 0 AC_BK */ + 0x00, /* 0 0 1 AC_BE */ + 0x03, /* 0 1 1 AC_BE */ + 0x04, /* 1 0 0 AC_VI */ + 0x05, /* 1 0 1 AC_VI */ + 0x06, /* 1 1 0 AC_VO */ + 0x07 /* 1 1 1 AC_VO */ +}; + +/* + * This table inverses the tos_to_tid operation to get a priority + * which is in sequential order, and can be compared. + * Use this to compare the priority of two different TIDs. + */ +static u8 tos_to_tid_inv[] = { + 0x02, /* from tos_to_tid[2] = 0 */ + 0x00, /* from tos_to_tid[0] = 1 */ + 0x01, /* from tos_to_tid[1] = 2 */ + 0x03, + 0x04, + 0x05, + 0x06, + 0x07}; + +static u8 ac_to_tid[4][2] = { {1, 2}, {0, 3}, {4, 5}, {6, 7} }; + +/* + * This function debug prints the priority parameters for a WMM AC. + */ +static void +mwifiex_wmm_ac_debug_print(const struct ieee_types_wmm_ac_parameters *ac_param) +{ + const char *ac_str[] = { "BK", "BE", "VI", "VO" }; + + pr_debug("info: WMM AC_%s: ACI=%d, ACM=%d, Aifsn=%d, " + "EcwMin=%d, EcwMax=%d, TxopLimit=%d\n", + ac_str[wmm_aci_to_qidx_map[(ac_param->aci_aifsn_bitmap + & MWIFIEX_ACI) >> 5]], + (ac_param->aci_aifsn_bitmap & MWIFIEX_ACI) >> 5, + (ac_param->aci_aifsn_bitmap & MWIFIEX_ACM) >> 4, + ac_param->aci_aifsn_bitmap & MWIFIEX_AIFSN, + ac_param->ecw_bitmap & MWIFIEX_ECW_MIN, + (ac_param->ecw_bitmap & MWIFIEX_ECW_MAX) >> 4, + le16_to_cpu(ac_param->tx_op_limit)); +} + +/* + * This function allocates a route address list. + * + * The function also initializes the list with the provided RA. + */ +static struct mwifiex_ra_list_tbl * +mwifiex_wmm_allocate_ralist_node(struct mwifiex_adapter *adapter, u8 *ra) +{ + struct mwifiex_ra_list_tbl *ra_list; + + ra_list = kzalloc(sizeof(struct mwifiex_ra_list_tbl), GFP_ATOMIC); + + if (!ra_list) { + dev_err(adapter->dev, "%s: failed to alloc ra_list\n", + __func__); + return NULL; + } + INIT_LIST_HEAD(&ra_list->list); + skb_queue_head_init(&ra_list->skb_head); + + memcpy(ra_list->ra, ra, ETH_ALEN); + + ra_list->total_pkts_size = 0; + + dev_dbg(adapter->dev, "info: allocated ra_list %p\n", ra_list); + + return ra_list; +} + +/* + * This function allocates and adds a RA list for all TIDs + * with the given RA. + */ +void +mwifiex_ralist_add(struct mwifiex_private *priv, u8 *ra) +{ + int i; + struct mwifiex_ra_list_tbl *ra_list; + struct mwifiex_adapter *adapter = priv->adapter; + + for (i = 0; i < MAX_NUM_TID; ++i) { + ra_list = mwifiex_wmm_allocate_ralist_node(adapter, ra); + dev_dbg(adapter->dev, "info: created ra_list %p\n", ra_list); + + if (!ra_list) + break; + + if (!mwifiex_queuing_ra_based(priv)) + ra_list->is_11n_enabled = IS_11N_ENABLED(priv); + else + ra_list->is_11n_enabled = false; + + dev_dbg(adapter->dev, "data: ralist %p: is_11n_enabled=%d\n", + ra_list, ra_list->is_11n_enabled); + + list_add_tail(&ra_list->list, + &priv->wmm.tid_tbl_ptr[i].ra_list); + + if (!priv->wmm.tid_tbl_ptr[i].ra_list_curr) + priv->wmm.tid_tbl_ptr[i].ra_list_curr = ra_list; + } +} + +/* + * This function sets the WMM queue priorities to their default values. + */ +static void mwifiex_wmm_default_queue_priorities(struct mwifiex_private *priv) +{ + /* Default queue priorities: VO->VI->BE->BK */ + priv->wmm.queue_priority[0] = WMM_AC_VO; + priv->wmm.queue_priority[1] = WMM_AC_VI; + priv->wmm.queue_priority[2] = WMM_AC_BE; + priv->wmm.queue_priority[3] = WMM_AC_BK; +} + +/* + * This function map ACs to TIDs. + */ +static void +mwifiex_wmm_queue_priorities_tid(struct mwifiex_private *priv, + u8 queue_priority[]) +{ + int i; + + for (i = 0; i < 4; ++i) { + tos_to_tid[7 - (i * 2)] = ac_to_tid[queue_priority[i]][1]; + tos_to_tid[6 - (i * 2)] = ac_to_tid[queue_priority[i]][0]; + } +} + +/* + * This function initializes WMM priority queues. + */ +void +mwifiex_wmm_setup_queue_priorities(struct mwifiex_private *priv, + struct ieee_types_wmm_parameter *wmm_ie) +{ + u16 cw_min, avg_back_off, tmp[4]; + u32 i, j, num_ac; + u8 ac_idx; + + if (!wmm_ie || !priv->wmm_enabled) { + /* WMM is not enabled, just set the defaults and return */ + mwifiex_wmm_default_queue_priorities(priv); + return; + } + + dev_dbg(priv->adapter->dev, "info: WMM Parameter IE: version=%d, " + "qos_info Parameter Set Count=%d, Reserved=%#x\n", + wmm_ie->vend_hdr.version, wmm_ie->qos_info_bitmap & + IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK, + wmm_ie->reserved); + + for (num_ac = 0; num_ac < ARRAY_SIZE(wmm_ie->ac_params); num_ac++) { + cw_min = (1 << (wmm_ie->ac_params[num_ac].ecw_bitmap & + MWIFIEX_ECW_MIN)) - 1; + avg_back_off = (cw_min >> 1) + + (wmm_ie->ac_params[num_ac].aci_aifsn_bitmap & + MWIFIEX_AIFSN); + + ac_idx = wmm_aci_to_qidx_map[(wmm_ie->ac_params[num_ac]. + aci_aifsn_bitmap & + MWIFIEX_ACI) >> 5]; + priv->wmm.queue_priority[ac_idx] = ac_idx; + tmp[ac_idx] = avg_back_off; + + dev_dbg(priv->adapter->dev, "info: WMM: CWmax=%d CWmin=%d Avg Back-off=%d\n", + (1 << ((wmm_ie->ac_params[num_ac].ecw_bitmap & + MWIFIEX_ECW_MAX) >> 4)) - 1, + cw_min, avg_back_off); + mwifiex_wmm_ac_debug_print(&wmm_ie->ac_params[num_ac]); + } + + /* Bubble sort */ + for (i = 0; i < num_ac; i++) { + for (j = 1; j < num_ac - i; j++) { + if (tmp[j - 1] > tmp[j]) { + swap(tmp[j - 1], tmp[j]); + swap(priv->wmm.queue_priority[j - 1], + priv->wmm.queue_priority[j]); + } else if (tmp[j - 1] == tmp[j]) { + if (priv->wmm.queue_priority[j - 1] + < priv->wmm.queue_priority[j]) + swap(priv->wmm.queue_priority[j - 1], + priv->wmm.queue_priority[j]); + } + } + } + + mwifiex_wmm_queue_priorities_tid(priv, priv->wmm.queue_priority); +} + +/* + * This function evaluates whether or not an AC is to be downgraded. + * + * In case the AC is not enabled, the highest AC is returned that is + * enabled and does not require admission control. + */ +static enum mwifiex_wmm_ac_e +mwifiex_wmm_eval_downgrade_ac(struct mwifiex_private *priv, + enum mwifiex_wmm_ac_e eval_ac) +{ + int down_ac; + enum mwifiex_wmm_ac_e ret_ac; + struct mwifiex_wmm_ac_status *ac_status; + + ac_status = &priv->wmm.ac_status[eval_ac]; + + if (!ac_status->disabled) + /* Okay to use this AC, its enabled */ + return eval_ac; + + /* Setup a default return value of the lowest priority */ + ret_ac = WMM_AC_BK; + + /* + * Find the highest AC that is enabled and does not require + * admission control. The spec disallows downgrading to an AC, + * which is enabled due to a completed admission control. + * Unadmitted traffic is not to be sent on an AC with admitted + * traffic. + */ + for (down_ac = WMM_AC_BK; down_ac < eval_ac; down_ac++) { + ac_status = &priv->wmm.ac_status[down_ac]; + + if (!ac_status->disabled && !ac_status->flow_required) + /* AC is enabled and does not require admission + control */ + ret_ac = (enum mwifiex_wmm_ac_e) down_ac; + } + + return ret_ac; +} + +/* + * This function downgrades WMM priority queue. + */ +void +mwifiex_wmm_setup_ac_downgrade(struct mwifiex_private *priv) +{ + int ac_val; + + dev_dbg(priv->adapter->dev, "info: WMM: AC Priorities:" + "BK(0), BE(1), VI(2), VO(3)\n"); + + if (!priv->wmm_enabled) { + /* WMM is not enabled, default priorities */ + for (ac_val = WMM_AC_BK; ac_val <= WMM_AC_VO; ac_val++) + priv->wmm.ac_down_graded_vals[ac_val] = + (enum mwifiex_wmm_ac_e) ac_val; + } else { + for (ac_val = WMM_AC_BK; ac_val <= WMM_AC_VO; ac_val++) { + priv->wmm.ac_down_graded_vals[ac_val] + = mwifiex_wmm_eval_downgrade_ac(priv, + (enum mwifiex_wmm_ac_e) ac_val); + dev_dbg(priv->adapter->dev, "info: WMM: AC PRIO %d maps to %d\n", + ac_val, priv->wmm.ac_down_graded_vals[ac_val]); + } + } +} + +/* + * This function converts the IP TOS field to an WMM AC + * Queue assignment. + */ +static enum mwifiex_wmm_ac_e +mwifiex_wmm_convert_tos_to_ac(struct mwifiex_adapter *adapter, u32 tos) +{ + /* Map of TOS UP values to WMM AC */ + const enum mwifiex_wmm_ac_e tos_to_ac[] = { WMM_AC_BE, + WMM_AC_BK, + WMM_AC_BK, + WMM_AC_BE, + WMM_AC_VI, + WMM_AC_VI, + WMM_AC_VO, + WMM_AC_VO + }; + + if (tos >= ARRAY_SIZE(tos_to_ac)) + return WMM_AC_BE; + + return tos_to_ac[tos]; +} + +/* + * This function evaluates a given TID and downgrades it to a lower + * TID if the WMM Parameter IE received from the AP indicates that the + * AP is disabled (due to call admission control (ACM bit). Mapping + * of TID to AC is taken care of internally. + */ +static u8 +mwifiex_wmm_downgrade_tid(struct mwifiex_private *priv, u32 tid) +{ + enum mwifiex_wmm_ac_e ac, ac_down; + u8 new_tid; + + ac = mwifiex_wmm_convert_tos_to_ac(priv->adapter, tid); + ac_down = priv->wmm.ac_down_graded_vals[ac]; + + /* Send the index to tid array, picking from the array will be + * taken care by dequeuing function + */ + new_tid = ac_to_tid[ac_down][tid % 2]; + + return new_tid; +} + +/* + * This function initializes the WMM state information and the + * WMM data path queues. + */ +void +mwifiex_wmm_init(struct mwifiex_adapter *adapter) +{ + int i, j; + struct mwifiex_private *priv; + + for (j = 0; j < adapter->priv_num; ++j) { + priv = adapter->priv[j]; + if (!priv) + continue; + + for (i = 0; i < MAX_NUM_TID; ++i) { + priv->aggr_prio_tbl[i].amsdu = tos_to_tid_inv[i]; + priv->aggr_prio_tbl[i].ampdu_ap = tos_to_tid_inv[i]; + priv->aggr_prio_tbl[i].ampdu_user = tos_to_tid_inv[i]; + priv->wmm.tid_tbl_ptr[i].ra_list_curr = NULL; + } + + priv->aggr_prio_tbl[6].amsdu + = priv->aggr_prio_tbl[6].ampdu_ap + = priv->aggr_prio_tbl[6].ampdu_user + = BA_STREAM_NOT_ALLOWED; + + priv->aggr_prio_tbl[7].amsdu = priv->aggr_prio_tbl[7].ampdu_ap + = priv->aggr_prio_tbl[7].ampdu_user + = BA_STREAM_NOT_ALLOWED; + + priv->add_ba_param.timeout = MWIFIEX_DEFAULT_BLOCK_ACK_TIMEOUT; + priv->add_ba_param.tx_win_size = MWIFIEX_AMPDU_DEF_TXWINSIZE; + priv->add_ba_param.rx_win_size = MWIFIEX_AMPDU_DEF_RXWINSIZE; + } +} + +/* + * This function checks if WMM Tx queue is empty. + */ +int +mwifiex_wmm_lists_empty(struct mwifiex_adapter *adapter) +{ + int i, j; + struct mwifiex_private *priv; + + for (j = 0; j < adapter->priv_num; ++j) { + priv = adapter->priv[j]; + if (priv) { + for (i = 0; i < MAX_NUM_TID; i++) + if (!mwifiex_wmm_is_ra_list_empty(adapter, + &priv->wmm.tid_tbl_ptr[i].ra_list)) + return false; + } + } + + return true; +} + +/* + * This function deletes all packets in an RA list node. + * + * The packet sent completion callback handler are called with + * status failure, after they are dequeued to ensure proper + * cleanup. The RA list node itself is freed at the end. + */ +static void +mwifiex_wmm_del_pkts_in_ralist_node(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ra_list) +{ + struct mwifiex_adapter *adapter = priv->adapter; + struct sk_buff *skb, *tmp; + + skb_queue_walk_safe(&ra_list->skb_head, skb, tmp) + mwifiex_write_data_complete(adapter, skb, -1); +} + +/* + * This function deletes all packets in an RA list. + * + * Each nodes in the RA list are freed individually first, and then + * the RA list itself is freed. + */ +static void +mwifiex_wmm_del_pkts_in_ralist(struct mwifiex_private *priv, + struct list_head *ra_list_head) +{ + struct mwifiex_ra_list_tbl *ra_list; + + list_for_each_entry(ra_list, ra_list_head, list) + mwifiex_wmm_del_pkts_in_ralist_node(priv, ra_list); +} + +/* + * This function deletes all packets in all RA lists. + */ +static void mwifiex_wmm_cleanup_queues(struct mwifiex_private *priv) +{ + int i; + + for (i = 0; i < MAX_NUM_TID; i++) + mwifiex_wmm_del_pkts_in_ralist(priv, &priv->wmm.tid_tbl_ptr[i]. + ra_list); +} + +/* + * This function deletes all route addresses from all RA lists. + */ +static void mwifiex_wmm_delete_all_ralist(struct mwifiex_private *priv) +{ + struct mwifiex_ra_list_tbl *ra_list, *tmp_node; + int i; + + for (i = 0; i < MAX_NUM_TID; ++i) { + dev_dbg(priv->adapter->dev, + "info: ra_list: freeing buf for tid %d\n", i); + list_for_each_entry_safe(ra_list, tmp_node, + &priv->wmm.tid_tbl_ptr[i].ra_list, list) { + list_del(&ra_list->list); + kfree(ra_list); + } + + INIT_LIST_HEAD(&priv->wmm.tid_tbl_ptr[i].ra_list); + + priv->wmm.tid_tbl_ptr[i].ra_list_curr = NULL; + } +} + +/* + * This function cleans up the Tx and Rx queues. + * + * Cleanup includes - + * - All packets in RA lists + * - All entries in Rx reorder table + * - All entries in Tx BA stream table + * - MPA buffer (if required) + * - All RA lists + */ +void +mwifiex_clean_txrx(struct mwifiex_private *priv) +{ + unsigned long flags; + + mwifiex_11n_cleanup_reorder_tbl(priv); + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags); + + mwifiex_wmm_cleanup_queues(priv); + mwifiex_11n_delete_all_tx_ba_stream_tbl(priv); + + if (priv->adapter->if_ops.cleanup_mpa_buf) + priv->adapter->if_ops.cleanup_mpa_buf(priv->adapter); + + mwifiex_wmm_delete_all_ralist(priv); + memcpy(tos_to_tid, ac_to_tid, sizeof(tos_to_tid)); + + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); +} + +/* + * This function retrieves a particular RA list node, matching with the + * given TID and RA address. + */ +static struct mwifiex_ra_list_tbl * +mwifiex_wmm_get_ralist_node(struct mwifiex_private *priv, u8 tid, + u8 *ra_addr) +{ + struct mwifiex_ra_list_tbl *ra_list; + + list_for_each_entry(ra_list, &priv->wmm.tid_tbl_ptr[tid].ra_list, + list) { + if (!memcmp(ra_list->ra, ra_addr, ETH_ALEN)) + return ra_list; + } + + return NULL; +} + +/* + * This function retrieves an RA list node for a given TID and + * RA address pair. + * + * If no such node is found, a new node is added first and then + * retrieved. + */ +static struct mwifiex_ra_list_tbl * +mwifiex_wmm_get_queue_raptr(struct mwifiex_private *priv, u8 tid, u8 *ra_addr) +{ + struct mwifiex_ra_list_tbl *ra_list; + + ra_list = mwifiex_wmm_get_ralist_node(priv, tid, ra_addr); + if (ra_list) + return ra_list; + mwifiex_ralist_add(priv, ra_addr); + + return mwifiex_wmm_get_ralist_node(priv, tid, ra_addr); +} + +/* + * This function checks if a particular RA list node exists in a given TID + * table index. + */ +int +mwifiex_is_ralist_valid(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ra_list, int ptr_index) +{ + struct mwifiex_ra_list_tbl *rlist; + + list_for_each_entry(rlist, &priv->wmm.tid_tbl_ptr[ptr_index].ra_list, + list) { + if (rlist == ra_list) + return true; + } + + return false; +} + +/* + * This function adds a packet to WMM queue. + * + * In disconnected state the packet is immediately dropped and the + * packet send completion callback is called with status failure. + * + * Otherwise, the correct RA list node is located and the packet + * is queued at the list tail. + */ +void +mwifiex_wmm_add_buf_txqueue(struct mwifiex_adapter *adapter, + struct sk_buff *skb) +{ + struct mwifiex_txinfo *tx_info = MWIFIEX_SKB_TXCB(skb); + struct mwifiex_private *priv = adapter->priv[tx_info->bss_index]; + u32 tid; + struct mwifiex_ra_list_tbl *ra_list; + u8 ra[ETH_ALEN], tid_down; + unsigned long flags; + + if (!priv->media_connected) { + dev_dbg(adapter->dev, "data: drop packet in disconnect\n"); + mwifiex_write_data_complete(adapter, skb, -1); + return; + } + + tid = skb->priority; + + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags); + + tid_down = mwifiex_wmm_downgrade_tid(priv, tid); + + /* In case of infra as we have already created the list during + association we just don't have to call get_queue_raptr, we will + have only 1 raptr for a tid in case of infra */ + if (!mwifiex_queuing_ra_based(priv)) { + if (!list_empty(&priv->wmm.tid_tbl_ptr[tid_down].ra_list)) + ra_list = list_first_entry( + &priv->wmm.tid_tbl_ptr[tid_down].ra_list, + struct mwifiex_ra_list_tbl, list); + else + ra_list = NULL; + } else { + memcpy(ra, skb->data, ETH_ALEN); + ra_list = mwifiex_wmm_get_queue_raptr(priv, tid_down, ra); + } + + if (!ra_list) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); + mwifiex_write_data_complete(adapter, skb, -1); + return; + } + + skb_queue_tail(&ra_list->skb_head, skb); + + ra_list->total_pkts_size += skb->len; + + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); +} + +/* + * This function processes the get WMM status command response from firmware. + * + * The response may contain multiple TLVs - + * - AC Queue status TLVs + * - Current WMM Parameter IE TLV + * - Admission Control action frame TLVs + * + * This function parses the TLVs and then calls further specific functions + * to process any changes in the queue prioritize or state. + */ +int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv, + const struct host_cmd_ds_command *resp) +{ + u8 *curr = (u8 *) &resp->params.get_wmm_status; + uint16_t resp_len = le16_to_cpu(resp->size), tlv_len; + int valid = true; + + struct mwifiex_ie_types_data *tlv_hdr; + struct mwifiex_ie_types_wmm_queue_status *tlv_wmm_qstatus; + struct ieee_types_wmm_parameter *wmm_param_ie = NULL; + struct mwifiex_wmm_ac_status *ac_status; + + dev_dbg(priv->adapter->dev, "info: WMM: WMM_GET_STATUS cmdresp received: %d\n", + resp_len); + + while ((resp_len >= sizeof(tlv_hdr->header)) && valid) { + tlv_hdr = (struct mwifiex_ie_types_data *) curr; + tlv_len = le16_to_cpu(tlv_hdr->header.len); + + switch (le16_to_cpu(tlv_hdr->header.type)) { + case TLV_TYPE_WMMQSTATUS: + tlv_wmm_qstatus = + (struct mwifiex_ie_types_wmm_queue_status *) + tlv_hdr; + dev_dbg(priv->adapter->dev, + "info: CMD_RESP: WMM_GET_STATUS:" + " QSTATUS TLV: %d, %d, %d\n", + tlv_wmm_qstatus->queue_index, + tlv_wmm_qstatus->flow_required, + tlv_wmm_qstatus->disabled); + + ac_status = &priv->wmm.ac_status[tlv_wmm_qstatus-> + queue_index]; + ac_status->disabled = tlv_wmm_qstatus->disabled; + ac_status->flow_required = + tlv_wmm_qstatus->flow_required; + ac_status->flow_created = tlv_wmm_qstatus->flow_created; + break; + + case WLAN_EID_VENDOR_SPECIFIC: + /* + * Point the regular IEEE IE 2 bytes into the Marvell IE + * and setup the IEEE IE type and length byte fields + */ + + wmm_param_ie = + (struct ieee_types_wmm_parameter *) (curr + + 2); + wmm_param_ie->vend_hdr.len = (u8) tlv_len; + wmm_param_ie->vend_hdr.element_id = + WLAN_EID_VENDOR_SPECIFIC; + + dev_dbg(priv->adapter->dev, + "info: CMD_RESP: WMM_GET_STATUS:" + " WMM Parameter Set Count: %d\n", + wmm_param_ie->qos_info_bitmap & + IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK); + + memcpy((u8 *) &priv->curr_bss_params.bss_descriptor. + wmm_ie, wmm_param_ie, + wmm_param_ie->vend_hdr.len + 2); + + break; + + default: + valid = false; + break; + } + + curr += (tlv_len + sizeof(tlv_hdr->header)); + resp_len -= (tlv_len + sizeof(tlv_hdr->header)); + } + + mwifiex_wmm_setup_queue_priorities(priv, wmm_param_ie); + mwifiex_wmm_setup_ac_downgrade(priv); + + return 0; +} + +/* + * Callback handler from the command module to allow insertion of a WMM TLV. + * + * If the BSS we are associating to supports WMM, this function adds the + * required WMM Information IE to the association request command buffer in + * the form of a Marvell extended IEEE IE. + */ +u32 +mwifiex_wmm_process_association_req(struct mwifiex_private *priv, + u8 **assoc_buf, + struct ieee_types_wmm_parameter *wmm_ie, + struct ieee80211_ht_cap *ht_cap) +{ + struct mwifiex_ie_types_wmm_param_set *wmm_tlv; + u32 ret_len = 0; + + /* Null checks */ + if (!assoc_buf) + return 0; + if (!(*assoc_buf)) + return 0; + + if (!wmm_ie) + return 0; + + dev_dbg(priv->adapter->dev, "info: WMM: process assoc req:" + "bss->wmmIe=0x%x\n", + wmm_ie->vend_hdr.element_id); + + if ((priv->wmm_required + || (ht_cap && (priv->adapter->config_bands & BAND_GN + || priv->adapter->config_bands & BAND_AN)) + ) + && wmm_ie->vend_hdr.element_id == WLAN_EID_VENDOR_SPECIFIC) { + wmm_tlv = (struct mwifiex_ie_types_wmm_param_set *) *assoc_buf; + wmm_tlv->header.type = cpu_to_le16((u16) wmm_info_ie[0]); + wmm_tlv->header.len = cpu_to_le16((u16) wmm_info_ie[1]); + memcpy(wmm_tlv->wmm_ie, &wmm_info_ie[2], + le16_to_cpu(wmm_tlv->header.len)); + if (wmm_ie->qos_info_bitmap & IEEE80211_WMM_IE_AP_QOSINFO_UAPSD) + memcpy((u8 *) (wmm_tlv->wmm_ie + + le16_to_cpu(wmm_tlv->header.len) + - sizeof(priv->wmm_qosinfo)), + &priv->wmm_qosinfo, + sizeof(priv->wmm_qosinfo)); + + ret_len = sizeof(wmm_tlv->header) + + le16_to_cpu(wmm_tlv->header.len); + + *assoc_buf += ret_len; + } + + return ret_len; +} + +/* + * This function computes the time delay in the driver queues for a + * given packet. + * + * When the packet is received at the OS/Driver interface, the current + * time is set in the packet structure. The difference between the present + * time and that received time is computed in this function and limited + * based on pre-compiled limits in the driver. + */ +u8 +mwifiex_wmm_compute_drv_pkt_delay(struct mwifiex_private *priv, + const struct sk_buff *skb) +{ + u8 ret_val = 0; + struct timeval out_tstamp, in_tstamp; + u32 queue_delay; + + do_gettimeofday(&out_tstamp); + in_tstamp = ktime_to_timeval(skb->tstamp); + + queue_delay = (out_tstamp.tv_sec - in_tstamp.tv_sec) * 1000; + queue_delay += (out_tstamp.tv_usec - in_tstamp.tv_usec) / 1000; + + /* + * Queue delay is passed as a uint8 in units of 2ms (ms shifted + * by 1). Min value (other than 0) is therefore 2ms, max is 510ms. + * + * Pass max value if queue_delay is beyond the uint8 range + */ + ret_val = (u8) (min(queue_delay, priv->wmm.drv_pkt_delay_max) >> 1); + + dev_dbg(priv->adapter->dev, "data: WMM: Pkt Delay: %d ms," + " %d ms sent to FW\n", queue_delay, ret_val); + + return ret_val; +} + +/* + * This function retrieves the highest priority RA list table pointer. + */ +static struct mwifiex_ra_list_tbl * +mwifiex_wmm_get_highest_priolist_ptr(struct mwifiex_adapter *adapter, + struct mwifiex_private **priv, int *tid) +{ + struct mwifiex_private *priv_tmp; + struct mwifiex_ra_list_tbl *ptr, *head; + struct mwifiex_bss_prio_node *bssprio_node, *bssprio_head; + struct mwifiex_tid_tbl *tid_ptr; + int is_list_empty; + unsigned long flags; + int i, j; + + for (j = adapter->priv_num - 1; j >= 0; --j) { + spin_lock_irqsave(&adapter->bss_prio_tbl[j].bss_prio_lock, + flags); + is_list_empty = list_empty(&adapter->bss_prio_tbl[j] + .bss_prio_head); + spin_unlock_irqrestore(&adapter->bss_prio_tbl[j].bss_prio_lock, + flags); + if (is_list_empty) + continue; + + if (adapter->bss_prio_tbl[j].bss_prio_cur == + (struct mwifiex_bss_prio_node *) + &adapter->bss_prio_tbl[j].bss_prio_head) { + bssprio_node = + list_first_entry(&adapter->bss_prio_tbl[j] + .bss_prio_head, + struct mwifiex_bss_prio_node, + list); + bssprio_head = bssprio_node; + } else { + bssprio_node = adapter->bss_prio_tbl[j].bss_prio_cur; + bssprio_head = bssprio_node; + } + + do { + priv_tmp = bssprio_node->priv; + + for (i = HIGH_PRIO_TID; i >= LOW_PRIO_TID; --i) { + + tid_ptr = &(priv_tmp)->wmm. + tid_tbl_ptr[tos_to_tid[i]]; + + spin_lock_irqsave(&tid_ptr->tid_tbl_lock, + flags); + is_list_empty = + list_empty(&adapter->bss_prio_tbl[j] + .bss_prio_head); + spin_unlock_irqrestore(&tid_ptr->tid_tbl_lock, + flags); + if (is_list_empty) + continue; + + /* + * Always choose the next ra we transmitted + * last time, this way we pick the ra's in + * round robin fashion. + */ + ptr = list_first_entry( + &tid_ptr->ra_list_curr->list, + struct mwifiex_ra_list_tbl, + list); + + head = ptr; + if (ptr == (struct mwifiex_ra_list_tbl *) + &tid_ptr->ra_list) { + /* Get next ra */ + ptr = list_first_entry(&ptr->list, + struct mwifiex_ra_list_tbl, list); + head = ptr; + } + + do { + is_list_empty = + skb_queue_empty(&ptr->skb_head); + if (!is_list_empty) { + *priv = priv_tmp; + *tid = tos_to_tid[i]; + return ptr; + } + /* Get next ra */ + ptr = list_first_entry(&ptr->list, + struct mwifiex_ra_list_tbl, + list); + if (ptr == + (struct mwifiex_ra_list_tbl *) + &tid_ptr->ra_list) + ptr = list_first_entry( + &ptr->list, + struct mwifiex_ra_list_tbl, + list); + } while (ptr != head); + } + + /* Get next bss priority node */ + bssprio_node = list_first_entry(&bssprio_node->list, + struct mwifiex_bss_prio_node, + list); + + if (bssprio_node == + (struct mwifiex_bss_prio_node *) + &adapter->bss_prio_tbl[j].bss_prio_head) + /* Get next bss priority node */ + bssprio_node = list_first_entry( + &bssprio_node->list, + struct mwifiex_bss_prio_node, + list); + } while (bssprio_node != bssprio_head); + } + return NULL; +} + +/* + * This function gets the number of packets in the Tx queue of a + * particular RA list. + */ +static int +mwifiex_num_pkts_in_txq(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int max_buf_size) +{ + int count = 0, total_size = 0; + struct sk_buff *skb, *tmp; + + skb_queue_walk_safe(&ptr->skb_head, skb, tmp) { + total_size += skb->len; + if (total_size < max_buf_size) + ++count; + else + break; + } + + return count; +} + +/* + * This function sends a single packet to firmware for transmission. + */ +static void +mwifiex_send_single_packet(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int ptr_index, + unsigned long ra_list_flags) + __releases(&priv->wmm.ra_list_spinlock) +{ + struct sk_buff *skb, *skb_next; + struct mwifiex_tx_param tx_param; + struct mwifiex_adapter *adapter = priv->adapter; + int status = 0; + struct mwifiex_txinfo *tx_info; + + if (skb_queue_empty(&ptr->skb_head)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + dev_dbg(adapter->dev, "data: nothing to send\n"); + return; + } + + skb = skb_dequeue(&ptr->skb_head); + + tx_info = MWIFIEX_SKB_TXCB(skb); + dev_dbg(adapter->dev, "data: dequeuing the packet %p %p\n", ptr, skb); + + ptr->total_pkts_size -= skb->len; + + if (!skb_queue_empty(&ptr->skb_head)) + skb_next = skb_peek(&ptr->skb_head); + else + skb_next = NULL; + + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, ra_list_flags); + + tx_param.next_pkt_len = ((skb_next) ? skb_next->len + + sizeof(struct txpd) : 0); + + status = mwifiex_process_tx(priv, skb, &tx_param); + + if (status == -EBUSY) { + /* Queue the packet back at the head */ + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + + if (!mwifiex_is_ralist_valid(priv, ptr, ptr_index)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + mwifiex_write_data_complete(adapter, skb, -1); + return; + } + + skb_queue_tail(&ptr->skb_head, skb); + + ptr->total_pkts_size += skb->len; + tx_info->flags |= MWIFIEX_BUF_FLAG_REQUEUED_PKT; + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + } else { + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + if (mwifiex_is_ralist_valid(priv, ptr, ptr_index)) { + priv->wmm.packets_out[ptr_index]++; + priv->wmm.tid_tbl_ptr[ptr_index].ra_list_curr = ptr; + } + adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur = + list_first_entry( + &adapter->bss_prio_tbl[priv->bss_priority] + .bss_prio_cur->list, + struct mwifiex_bss_prio_node, + list); + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + } +} + +/* + * This function checks if the first packet in the given RA list + * is already processed or not. + */ +static int +mwifiex_is_ptr_processed(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr) +{ + struct sk_buff *skb; + struct mwifiex_txinfo *tx_info; + + if (skb_queue_empty(&ptr->skb_head)) + return false; + + skb = skb_peek(&ptr->skb_head); + + tx_info = MWIFIEX_SKB_TXCB(skb); + if (tx_info->flags & MWIFIEX_BUF_FLAG_REQUEUED_PKT) + return true; + + return false; +} + +/* + * This function sends a single processed packet to firmware for + * transmission. + */ +static void +mwifiex_send_processed_packet(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ptr, int ptr_index, + unsigned long ra_list_flags) + __releases(&priv->wmm.ra_list_spinlock) +{ + struct mwifiex_tx_param tx_param; + struct mwifiex_adapter *adapter = priv->adapter; + int ret = -1; + struct sk_buff *skb, *skb_next; + struct mwifiex_txinfo *tx_info; + + if (skb_queue_empty(&ptr->skb_head)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + return; + } + + skb = skb_dequeue(&ptr->skb_head); + + if (!skb_queue_empty(&ptr->skb_head)) + skb_next = skb_peek(&ptr->skb_head); + else + skb_next = NULL; + + tx_info = MWIFIEX_SKB_TXCB(skb); + + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, ra_list_flags); + tx_param.next_pkt_len = + ((skb_next) ? skb_next->len + + sizeof(struct txpd) : 0); + ret = adapter->if_ops.host_to_card(adapter, MWIFIEX_TYPE_DATA, + skb->data, skb->len, &tx_param); + switch (ret) { + case -EBUSY: + dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + + if (!mwifiex_is_ralist_valid(priv, ptr, ptr_index)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + mwifiex_write_data_complete(adapter, skb, -1); + return; + } + + skb_queue_tail(&ptr->skb_head, skb); + + tx_info->flags |= MWIFIEX_BUF_FLAG_REQUEUED_PKT; + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + break; + case -1: + adapter->data_sent = false; + dev_err(adapter->dev, "host_to_card failed: %#x\n", ret); + adapter->dbg.num_tx_host_to_card_failure++; + mwifiex_write_data_complete(adapter, skb, ret); + break; + case -EINPROGRESS: + adapter->data_sent = false; + default: + break; + } + if (ret != -EBUSY) { + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, ra_list_flags); + if (mwifiex_is_ralist_valid(priv, ptr, ptr_index)) { + priv->wmm.packets_out[ptr_index]++; + priv->wmm.tid_tbl_ptr[ptr_index].ra_list_curr = ptr; + } + adapter->bss_prio_tbl[priv->bss_priority].bss_prio_cur = + list_first_entry( + &adapter->bss_prio_tbl[priv->bss_priority] + .bss_prio_cur->list, + struct mwifiex_bss_prio_node, + list); + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, + ra_list_flags); + } +} + +/* + * This function dequeues a packet from the highest priority list + * and transmits it. + */ +static int +mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter) +{ + struct mwifiex_ra_list_tbl *ptr; + struct mwifiex_private *priv = NULL; + int ptr_index = 0; + u8 ra[ETH_ALEN]; + int tid_del = 0, tid = 0; + unsigned long flags; + + ptr = mwifiex_wmm_get_highest_priolist_ptr(adapter, &priv, &ptr_index); + if (!ptr) + return -1; + + tid = mwifiex_get_tid(priv->adapter, ptr); + + dev_dbg(adapter->dev, "data: tid=%d\n", tid); + + spin_lock_irqsave(&priv->wmm.ra_list_spinlock, flags); + if (!mwifiex_is_ralist_valid(priv, ptr, ptr_index)) { + spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); + return -1; + } + + if (mwifiex_is_ptr_processed(priv, ptr)) { + mwifiex_send_processed_packet(priv, ptr, ptr_index, flags); + /* ra_list_spinlock has been freed in + mwifiex_send_processed_packet() */ + return 0; + } + + if (!ptr->is_11n_enabled || mwifiex_is_ba_stream_setup(priv, ptr, tid) + || ((priv->sec_info.wpa_enabled + || priv->sec_info.wpa2_enabled) && !priv->wpa_is_gtk_set) + ) { + mwifiex_send_single_packet(priv, ptr, ptr_index, flags); + /* ra_list_spinlock has been freed in + mwifiex_send_single_packet() */ + } else { + if (mwifiex_is_ampdu_allowed(priv, ptr, tid)) { + if (mwifiex_is_ba_stream_avail(priv)) { + mwifiex_11n_create_tx_ba_stream_tbl(priv, + ptr->ra, tid, + BA_STREAM_SETUP_INPROGRESS); + mwifiex_send_addba(priv, tid, ptr->ra); + } else if (mwifiex_find_stream_to_delete + (priv, ptr, tid, &tid_del, ra)) { + mwifiex_11n_create_tx_ba_stream_tbl(priv, + ptr->ra, tid, + BA_STREAM_SETUP_INPROGRESS); + mwifiex_send_delba(priv, tid_del, ra, 1); + } + } +/* Minimum number of AMSDU */ +#define MIN_NUM_AMSDU 2 + if (mwifiex_is_amsdu_allowed(priv, ptr, tid) && + (mwifiex_num_pkts_in_txq(priv, ptr, adapter->tx_buf_size) >= + MIN_NUM_AMSDU)) + mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN, + ptr_index, flags); + /* ra_list_spinlock has been freed in + mwifiex_11n_aggregate_pkt() */ + else + mwifiex_send_single_packet(priv, ptr, ptr_index, flags); + /* ra_list_spinlock has been freed in + mwifiex_send_single_packet() */ + } + return 0; +} + +/* + * This function transmits the highest priority packet awaiting in the + * WMM Queues. + */ +void +mwifiex_wmm_process_tx(struct mwifiex_adapter *adapter) +{ + do { + /* Check if busy */ + if (adapter->data_sent || adapter->tx_lock_flag) + break; + + if (mwifiex_dequeue_tx_packet(adapter)) + break; + } while (true); + + return; +} diff --git a/drivers/net/wireless/mwifiex/wmm.h b/drivers/net/wireless/mwifiex/wmm.h new file mode 100644 index 000000000000..241f1b0b77f9 --- /dev/null +++ b/drivers/net/wireless/mwifiex/wmm.h @@ -0,0 +1,112 @@ +/* + * Marvell Wireless LAN device driver: WMM + * + * Copyright (C) 2011, Marvell International Ltd. + * + * This software file (the "File") is distributed by Marvell International + * Ltd. under the terms of the GNU General Public License Version 2, June 1991 + * (the "License"). You may use, redistribute and/or modify this File in + * accordance with the terms and conditions of the License, a copy of which + * is available by writing to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the + * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. + * + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE + * ARE EXPRESSLY DISCLAIMED. The License provides additional details about + * this warranty disclaimer. + */ + +#ifndef _MWIFIEX_WMM_H_ +#define _MWIFIEX_WMM_H_ + +enum ieee_types_wmm_aciaifsn_bitmasks { + MWIFIEX_AIFSN = (BIT(0) | BIT(1) | BIT(2) | BIT(3)), + MWIFIEX_ACM = BIT(4), + MWIFIEX_ACI = (BIT(5) | BIT(6)), +}; + +enum ieee_types_wmm_ecw_bitmasks { + MWIFIEX_ECW_MIN = (BIT(0) | BIT(1) | BIT(2) | BIT(3)), + MWIFIEX_ECW_MAX = (BIT(4) | BIT(5) | BIT(6) | BIT(7)), +}; + +/* + * This function retrieves the TID of the given RA list. + */ +static inline int +mwifiex_get_tid(struct mwifiex_adapter *adapter, + struct mwifiex_ra_list_tbl *ptr) +{ + struct sk_buff *skb; + + if (skb_queue_empty(&ptr->skb_head)) + return 0; + + skb = skb_peek(&ptr->skb_head); + + return skb->priority; +} + +/* + * This function gets the length of a list. + */ +static inline int +mwifiex_wmm_list_len(struct mwifiex_adapter *adapter, struct list_head *head) +{ + struct list_head *pos; + int count = 0; + + list_for_each(pos, head) + ++count; + + return count; +} + +/* + * This function checks if a RA list is empty or not. + */ +static inline u8 +mwifiex_wmm_is_ra_list_empty(struct mwifiex_adapter *adapter, + struct list_head *ra_list_hhead) +{ + struct mwifiex_ra_list_tbl *ra_list; + int is_list_empty; + + list_for_each_entry(ra_list, ra_list_hhead, list) { + is_list_empty = skb_queue_empty(&ra_list->skb_head); + if (!is_list_empty) + return false; + } + + return true; +} + +void mwifiex_wmm_add_buf_txqueue(struct mwifiex_adapter *adapter, + struct sk_buff *skb); +void mwifiex_ralist_add(struct mwifiex_private *priv, u8 *ra); + +int mwifiex_wmm_lists_empty(struct mwifiex_adapter *adapter); +void mwifiex_wmm_process_tx(struct mwifiex_adapter *adapter); +int mwifiex_is_ralist_valid(struct mwifiex_private *priv, + struct mwifiex_ra_list_tbl *ra_list, int tid); + +u8 mwifiex_wmm_compute_drv_pkt_delay(struct mwifiex_private *priv, + const struct sk_buff *skb); +void mwifiex_wmm_init(struct mwifiex_adapter *adapter); + +extern u32 mwifiex_wmm_process_association_req(struct mwifiex_private *priv, + u8 **assoc_buf, + struct ieee_types_wmm_parameter + *wmmie, + struct ieee80211_ht_cap + *htcap); + +void mwifiex_wmm_setup_queue_priorities(struct mwifiex_private *priv, + struct ieee_types_wmm_parameter + *wmm_ie); +void mwifiex_wmm_setup_ac_downgrade(struct mwifiex_private *priv); +extern int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv, + const struct host_cmd_ds_command *resp); + +#endif /* !_MWIFIEX_WMM_H_ */ |
