diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/rs.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/rs.h | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h new file mode 100644 index 000000000000..219c6857cc0f --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/rs.h @@ -0,0 +1,393 @@ +/****************************************************************************** + * + * Copyright(c) 2003 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + *****************************************************************************/ + +#ifndef __rs_h__ +#define __rs_h__ + +#include <net/mac80211.h> + +#include "iwl-config.h" + +#include "fw-api.h" +#include "iwl-trans.h" + +struct iwl_rs_rate_info { + u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */ + u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */ + u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */ + u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */ + u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */ + u8 prev_ieee; /* previous rate in IEEE speeds */ + u8 next_ieee; /* next rate in IEEE speeds */ + u8 prev_rs; /* previous rate used in rs algo */ + u8 next_rs; /* next rate used in rs algo */ + u8 prev_rs_tgg; /* previous rate used in TGG rs algo */ + u8 next_rs_tgg; /* next rate used in TGG rs algo */ +}; + +#define IWL_RATE_60M_PLCP 3 + +enum { + IWL_RATE_INVM_INDEX = IWL_RATE_COUNT, + IWL_RATE_INVALID = IWL_RATE_COUNT, +}; + +#define LINK_QUAL_MAX_RETRY_NUM 16 + +enum { + IWL_RATE_6M_INDEX_TABLE = 0, + IWL_RATE_9M_INDEX_TABLE, + IWL_RATE_12M_INDEX_TABLE, + IWL_RATE_18M_INDEX_TABLE, + IWL_RATE_24M_INDEX_TABLE, + IWL_RATE_36M_INDEX_TABLE, + IWL_RATE_48M_INDEX_TABLE, + IWL_RATE_54M_INDEX_TABLE, + IWL_RATE_1M_INDEX_TABLE, + IWL_RATE_2M_INDEX_TABLE, + IWL_RATE_5M_INDEX_TABLE, + IWL_RATE_11M_INDEX_TABLE, + IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1, +}; + +/* #define vs. enum to keep from defaulting to 'large integer' */ +#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX) +#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX) +#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX) +#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX) +#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX) +#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX) +#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX) +#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX) +#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX) +#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX) +#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX) +#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) +#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) + + +/* uCode API values for OFDM high-throughput (HT) bit rates */ +enum { + IWL_RATE_SISO_6M_PLCP = 0, + IWL_RATE_SISO_12M_PLCP = 1, + IWL_RATE_SISO_18M_PLCP = 2, + IWL_RATE_SISO_24M_PLCP = 3, + IWL_RATE_SISO_36M_PLCP = 4, + IWL_RATE_SISO_48M_PLCP = 5, + IWL_RATE_SISO_54M_PLCP = 6, + IWL_RATE_SISO_60M_PLCP = 7, + IWL_RATE_MIMO2_6M_PLCP = 0x8, + IWL_RATE_MIMO2_12M_PLCP = 0x9, + IWL_RATE_MIMO2_18M_PLCP = 0xa, + IWL_RATE_MIMO2_24M_PLCP = 0xb, + IWL_RATE_MIMO2_36M_PLCP = 0xc, + IWL_RATE_MIMO2_48M_PLCP = 0xd, + IWL_RATE_MIMO2_54M_PLCP = 0xe, + IWL_RATE_MIMO2_60M_PLCP = 0xf, + IWL_RATE_MIMO3_6M_PLCP = 0x10, + IWL_RATE_MIMO3_12M_PLCP = 0x11, + IWL_RATE_MIMO3_18M_PLCP = 0x12, + IWL_RATE_MIMO3_24M_PLCP = 0x13, + IWL_RATE_MIMO3_36M_PLCP = 0x14, + IWL_RATE_MIMO3_48M_PLCP = 0x15, + IWL_RATE_MIMO3_54M_PLCP = 0x16, + IWL_RATE_MIMO3_60M_PLCP = 0x17, + IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, + IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP, +}; + +/* MAC header values for bit rates */ +enum { + IWL_RATE_6M_IEEE = 12, + IWL_RATE_9M_IEEE = 18, + IWL_RATE_12M_IEEE = 24, + IWL_RATE_18M_IEEE = 36, + IWL_RATE_24M_IEEE = 48, + IWL_RATE_36M_IEEE = 72, + IWL_RATE_48M_IEEE = 96, + IWL_RATE_54M_IEEE = 108, + IWL_RATE_60M_IEEE = 120, + IWL_RATE_1M_IEEE = 2, + IWL_RATE_2M_IEEE = 4, + IWL_RATE_5M_IEEE = 11, + IWL_RATE_11M_IEEE = 22, +}; + +#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1) + +#define IWL_INVALID_VALUE -1 + +#define IWL_MIN_RSSI_VAL -100 +#define IWL_MAX_RSSI_VAL 0 + +/* These values specify how many Tx frame attempts before + * searching for a new modulation mode */ +#define IWL_LEGACY_FAILURE_LIMIT 160 +#define IWL_LEGACY_SUCCESS_LIMIT 480 +#define IWL_LEGACY_TABLE_COUNT 160 + +#define IWL_NONE_LEGACY_FAILURE_LIMIT 400 +#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500 +#define IWL_NONE_LEGACY_TABLE_COUNT 1500 + +/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */ +#define IWL_RS_GOOD_RATIO 12800 /* 100% */ +#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */ +#define IWL_RATE_HIGH_TH 10880 /* 85% */ +#define IWL_RATE_INCREASE_TH 6400 /* 50% */ +#define IWL_RATE_DECREASE_TH 1920 /* 15% */ + +/* possible actions when in legacy mode */ +#define IWL_LEGACY_SWITCH_ANTENNA1 0 +#define IWL_LEGACY_SWITCH_ANTENNA2 1 +#define IWL_LEGACY_SWITCH_SISO 2 +#define IWL_LEGACY_SWITCH_MIMO2_AB 3 +#define IWL_LEGACY_SWITCH_MIMO2_AC 4 +#define IWL_LEGACY_SWITCH_MIMO2_BC 5 +#define IWL_LEGACY_SWITCH_MIMO3_ABC 6 + +/* possible actions when in siso mode */ +#define IWL_SISO_SWITCH_ANTENNA1 0 +#define IWL_SISO_SWITCH_ANTENNA2 1 +#define IWL_SISO_SWITCH_MIMO2_AB 2 +#define IWL_SISO_SWITCH_MIMO2_AC 3 +#define IWL_SISO_SWITCH_MIMO2_BC 4 +#define IWL_SISO_SWITCH_GI 5 +#define IWL_SISO_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo mode */ +#define IWL_MIMO2_SWITCH_ANTENNA1 0 +#define IWL_MIMO2_SWITCH_ANTENNA2 1 +#define IWL_MIMO2_SWITCH_SISO_A 2 +#define IWL_MIMO2_SWITCH_SISO_B 3 +#define IWL_MIMO2_SWITCH_SISO_C 4 +#define IWL_MIMO2_SWITCH_GI 5 +#define IWL_MIMO2_SWITCH_MIMO3_ABC 6 + + +/* possible actions when in mimo3 mode */ +#define IWL_MIMO3_SWITCH_ANTENNA1 0 +#define IWL_MIMO3_SWITCH_ANTENNA2 1 +#define IWL_MIMO3_SWITCH_SISO_A 2 +#define IWL_MIMO3_SWITCH_SISO_B 3 +#define IWL_MIMO3_SWITCH_SISO_C 4 +#define IWL_MIMO3_SWITCH_MIMO2_AB 5 +#define IWL_MIMO3_SWITCH_MIMO2_AC 6 +#define IWL_MIMO3_SWITCH_MIMO2_BC 7 +#define IWL_MIMO3_SWITCH_GI 8 + + +#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI +#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC + +/*FIXME:RS:add possible actions for MIMO3*/ + +#define IWL_ACTION_LIMIT 3 /* # possible actions */ + +#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */ +#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000) +#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100) + +#define LINK_QUAL_AGG_DISABLE_START_DEF (3) +#define LINK_QUAL_AGG_DISABLE_START_MAX (255) +#define LINK_QUAL_AGG_DISABLE_START_MIN (0) + +#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (63) +#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63) +#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0) + +#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */ + +/* load per tid defines for A-MPDU activation */ +#define IWL_AGG_TPT_THREHOLD 0 +#define IWL_AGG_LOAD_THRESHOLD 10 +#define IWL_AGG_ALL_TID 0xff +#define TID_QUEUE_CELL_SPACING 50 /*mS */ +#define TID_QUEUE_MAX_SIZE 20 +#define TID_ROUND_VALUE 5 /* mS */ + +#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING) +#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y)) + +enum iwl_table_type { + LQ_NONE, + LQ_G, /* legacy types */ + LQ_A, + LQ_SISO, /* high-throughput types */ + LQ_MIMO2, + LQ_MIMO3, + LQ_MAX, +}; + +#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A)) +#define is_siso(tbl) ((tbl) == LQ_SISO) +#define is_mimo2(tbl) ((tbl) == LQ_MIMO2) +#define is_mimo3(tbl) ((tbl) == LQ_MIMO3) +#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl)) +#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl)) +#define is_a_band(tbl) ((tbl) == LQ_A) +#define is_g_and(tbl) ((tbl) == LQ_G) + +#define IWL_MAX_MCS_DISPLAY_SIZE 12 + +struct iwl_rate_mcs_info { + char mbps[IWL_MAX_MCS_DISPLAY_SIZE]; + char mcs[IWL_MAX_MCS_DISPLAY_SIZE]; +}; + +/** + * struct iwl_rate_scale_data -- tx success history for one rate + */ +struct iwl_rate_scale_data { + u64 data; /* bitmap of successful frames */ + s32 success_counter; /* number of frames successful */ + s32 success_ratio; /* per-cent * 128 */ + s32 counter; /* number of frames attempted */ + s32 average_tpt; /* success ratio * expected throughput */ + unsigned long stamp; +}; + +/** + * struct iwl_scale_tbl_info -- tx params and success history for all rates + * + * There are two of these in struct iwl_lq_sta, + * one for "active", and one for "search". + */ +struct iwl_scale_tbl_info { + enum iwl_table_type lq_type; + u8 ant_type; + u8 is_SGI; /* 1 = short guard interval */ + u8 is_ht40; /* 1 = 40 MHz channel width */ + u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ + u8 max_search; /* maximun number of tables we can search */ + s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ + u32 current_rate; /* rate_n_flags, uCode API format */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ +}; + +struct iwl_traffic_load { + unsigned long time_stamp; /* age of the oldest statistics */ + u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time + * slice */ + u32 total; /* total num of packets during the + * last TID_MAX_TIME_DIFF */ + u8 queue_count; /* number of queues that has + * been used since the last cleanup */ + u8 head; /* start of the circular buffer */ +}; + +/** + * struct iwl_lq_sta -- driver's rate scaling private structure + * + * Pointer to this gets passed back and forth between driver and mac80211. + */ +struct iwl_lq_sta { + u8 active_tbl; /* index of active table, range 0-1 */ + u8 enable_counter; /* indicates HT mode */ + u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ + u8 search_better_tbl; /* 1: currently trying alternate mode */ + s32 last_tpt; + + /* The following determine when to search for a new mode */ + u32 table_count_limit; + u32 max_failure_limit; /* # failed frames before new search */ + u32 max_success_limit; /* # successful frames before new search */ + u32 table_count; + u32 total_failed; /* total failed frames, any/all rates */ + u32 total_success; /* total successful frames, any/all rates */ + u64 flush_timer; /* time staying in mode before new search */ + + u8 action_counter; /* # mode-switch actions tried */ + u8 is_green; + enum ieee80211_band band; + + /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */ + u32 supp_rates; + u16 active_legacy_rate; + u16 active_siso_rate; + u16 active_mimo2_rate; + u16 active_mimo3_rate; + s8 max_rate_idx; /* Max rate set by user */ + u8 missed_rate_counter; + + struct iwl_lq_cmd lq; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[IWL_MAX_TID_COUNT]; + u8 tx_agg_tid_en; +#ifdef CONFIG_MAC80211_DEBUGFS + struct dentry *rs_sta_dbgfs_scale_table_file; + struct dentry *rs_sta_dbgfs_stats_table_file; + struct dentry *rs_sta_dbgfs_rate_scale_data_file; + struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file; + u32 dbg_fixed_rate; +#endif + struct iwl_mvm *drv; + + /* used to be in sta_info */ + int last_txrate_idx; + /* last tx rate_n_flags */ + u32 last_rate_n_flags; + /* packets destined for this STA are aggregated */ + u8 is_agg; + /* BT traffic this sta was last updated in */ + u8 last_bt_traffic; +}; + +static inline u8 num_of_ant(u8 mask) +{ + return !!((mask) & ANT_A) + + !!((mask) & ANT_B) + + !!((mask) & ANT_C); +} + +/* Initialize station's rate scaling information after adding station */ +extern void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + enum ieee80211_band band); + +/** + * iwl_rate_control_register - Register the rate control algorithm callbacks + * + * Since the rate control algorithm is hardware specific, there is no need + * or reason to place it as a stand alone module. The driver can call + * iwl_rate_control_register in order to register the rate control callbacks + * with the mac80211 subsystem. This should be performed prior to calling + * ieee80211_register_hw + * + */ +extern int iwl_mvm_rate_control_register(void); + +/** + * iwl_rate_control_unregister - Unregister the rate control callbacks + * + * This should be called after calling ieee80211_unregister_hw, but before + * the driver is unloaded. + */ +extern void iwl_mvm_rate_control_unregister(void); + +#endif /* __rs__ */ |
