diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/mvm/fw-api-power.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/mvm/fw-api-power.h | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h new file mode 100644 index 000000000000..be36b7604b7f --- /dev/null +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -0,0 +1,140 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless <ilw@linux.intel.com> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ + +#ifndef __fw_api_power_h__ +#define __fw_api_power_h__ + +/* Power Management Commands, Responses, Notifications */ + +/** + * enum iwl_scan_flags - masks for power table command flags + * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, + * '1' Driver enables PM (use rest of parameters) + * @POWER_FLAGS_SLEEP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, + * '1' PM could sleep over DTIM till listen Interval. + * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. + * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all + * access categories are both delivery and trigger enabled. + * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and + * PBW Snoozing enabled + * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask +*/ +enum iwl_power_flags { + POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(0), + POWER_FLAGS_SLEEP_OVER_DTIM_MSK = BIT(1), + POWER_FLAGS_LPRX_ENA_MSK = BIT(2), + POWER_FLAGS_SNOOZE_ENA_MSK = BIT(3), + POWER_FLAGS_BT_SCO_ENA = BIT(4), + POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(5) +}; + +/** + * struct iwl_powertable_cmd - Power Table Command + * POWER_TABLE_CMD = 0x77 (command, has simple generic response) + * + * @id_and_color: MAC contex identifier + * @action: Action on context - no action, add new, + * modify existent, remove + * @flags: Power table command flags from POWER_FLAGS_* + * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. + * Minimum allowed:- 3 * DTIM + * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to + * PSM transition - legacy PM + * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to + * PSM transition - legacy PM + * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to + * PSM transition - uAPSD + * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to + * PSM transition - uAPSD + * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. + * Default: 80dbm + * @num_skip_dtim: Number of DTIMs to skip if Skip over DTIM flag is set + * @snooze_interval: TBD + * @snooze_window: TBD + * @snooze_step: TBD + * @qndp_tid: TBD + * @uapsd_ac_flags: TBD + * @uapsd_max_sp: TBD + */ +struct iwl_powertable_cmd { + /* COMMON_INDEX_HDR_API_S_VER_1 */ + __le32 id_and_color; + __le32 action; + __le16 flags; + u8 reserved; + __le16 keep_alive_seconds; + __le32 rx_data_timeout; + __le32 tx_data_timeout; + __le32 rx_data_timeout_uapsd; + __le32 tx_data_timeout_uapsd; + u8 lprx_rssi_threshold; + u8 num_skip_dtim; + __le16 snooze_interval; + __le16 snooze_window; + u8 snooze_step; + u8 qndp_tid; + u8 uapsd_ac_flags; + u8 uapsd_max_sp; +} __packed; + +#endif |
