diff options
Diffstat (limited to 'drivers/net/wireless/hostap/hostap_plx.c')
| -rw-r--r-- | drivers/net/wireless/hostap/hostap_plx.c | 645 |
1 files changed, 645 insertions, 0 deletions
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c new file mode 100644 index 000000000000..474ef83d813e --- /dev/null +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -0,0 +1,645 @@ +#define PRISM2_PLX + +/* Host AP driver's support for PC Cards on PCI adapters using PLX9052 is + * based on: + * - Host AP driver patch from james@madingley.org + * - linux-wlan-ng driver, Copyright (C) AbsoluteValue Systems, Inc. + */ + + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/if.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/workqueue.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> + +#include <linux/ioport.h> +#include <linux/pci.h> +#include <asm/io.h> + +#include "hostap_wlan.h" + + +static char *version = PRISM2_VERSION " (Jouni Malinen <jkmaline@cc.hut.fi>)"; +static char *dev_info = "hostap_plx"; + + +MODULE_AUTHOR("Jouni Malinen"); +MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN " + "cards (PLX)."); +MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(PRISM2_VERSION); + + +static int ignore_cis; +module_param(ignore_cis, int, 0444); +MODULE_PARM_DESC(ignore_cis, "Do not verify manfid information in CIS"); + + +/* struct local_info::hw_priv */ +struct hostap_plx_priv { + void __iomem *attr_mem; + unsigned int cor_offset; +}; + + +#define PLX_MIN_ATTR_LEN 512 /* at least 2 x 256 is needed for CIS */ +#define COR_SRESET 0x80 +#define COR_LEVLREQ 0x40 +#define COR_ENABLE_FUNC 0x01 +/* PCI Configuration Registers */ +#define PLX_PCIIPR 0x3d /* PCI Interrupt Pin */ +/* Local Configuration Registers */ +#define PLX_INTCSR 0x4c /* Interrupt Control/Status Register */ +#define PLX_INTCSR_PCI_INTEN BIT(6) /* PCI Interrupt Enable */ +#define PLX_CNTRL 0x50 +#define PLX_CNTRL_SERIAL_EEPROM_PRESENT BIT(28) + + +#define PLXDEV(vendor,dev,str) { vendor, dev, PCI_ANY_ID, PCI_ANY_ID } + +static struct pci_device_id prism2_plx_id_table[] __devinitdata = { + PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"), + PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"), + PLXDEV(0x126c, 0x8030, "Nortel emobility"), + PLXDEV(0x1385, 0x4100, "Netgear MA301"), + PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"), + PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"), + PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"), + PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"), + PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"), + PLXDEV(0x16ab, 0x1103, "Longshine 8031"), + PLXDEV(0x16ec, 0x3685, "US Robotics USR2415"), + PLXDEV(0xec80, 0xec00, "Belkin F5D6000"), + { 0 } +}; + + +/* Array of known Prism2/2.5 PC Card manufactured ids. If your card's manfid + * is not listed here, you will need to add it here to get the driver + * initialized. */ +static struct prism2_plx_manfid { + u16 manfid1, manfid2; +} prism2_plx_known_manfids[] = { + { 0x000b, 0x7110 } /* D-Link DWL-650 Rev. P1 */, + { 0x000b, 0x7300 } /* Philips 802.11b WLAN PCMCIA */, + { 0x0101, 0x0777 } /* 3Com AirConnect PCI 777A */, + { 0x0126, 0x8000 } /* Proxim RangeLAN */, + { 0x0138, 0x0002 } /* Compaq WL100 */, + { 0x0156, 0x0002 } /* Intersil Prism II Ref. Design (and others) */, + { 0x026f, 0x030b } /* Buffalo WLI-CF-S11G */, + { 0x0274, 0x1612 } /* Linksys WPC11 Ver 2.5 */, + { 0x0274, 0x1613 } /* Linksys WPC11 Ver 3 */, + { 0x028a, 0x0002 } /* D-Link DRC-650 */, + { 0x0250, 0x0002 } /* Samsung SWL2000-N */, + { 0xc250, 0x0002 } /* EMTAC A2424i */, + { 0xd601, 0x0002 } /* Z-Com XI300 */, + { 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */, + { 0, 0} +}; + + +#ifdef PRISM2_IO_DEBUG + +static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v); + outb(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u8 hfa384x_inb_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u8 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = inb(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v); + outw(v, dev->base_addr + a); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline u16 hfa384x_inw_debug(struct net_device *dev, int a) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + u16 v; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + v = inw(dev->base_addr + a); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v); + spin_unlock_irqrestore(&local->lock, flags); + return v; +} + +static inline void hfa384x_outsw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc); + outsw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +static inline void hfa384x_insw_debug(struct net_device *dev, int a, + u8 *buf, int wc) +{ + struct hostap_interface *iface; + local_info_t *local; + unsigned long flags; + + iface = netdev_priv(dev); + local = iface->local; + + spin_lock_irqsave(&local->lock, flags); + prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc); + insw(dev->base_addr + a, buf, wc); + spin_unlock_irqrestore(&local->lock, flags); +} + +#define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v)) +#define HFA384X_INB(a) hfa384x_inb_debug(dev, (a)) +#define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v)) +#define HFA384X_INW(a) hfa384x_inw_debug(dev, (a)) +#define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc)) +#define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc)) + +#else /* PRISM2_IO_DEBUG */ + +#define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a)) +#define HFA384X_INB(a) inb(dev->base_addr + (a)) +#define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a)) +#define HFA384X_INW(a) inw(dev->base_addr + (a)) +#define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc) +#define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc) + +#endif /* PRISM2_IO_DEBUG */ + + +static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf, + int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_INSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + *((char *) pos) = HFA384X_INB(d_off); + + return 0; +} + + +static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len) +{ + u16 d_off; + u16 *pos; + + d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF; + pos = (u16 *) buf; + + if (len / 2) + HFA384X_OUTSW(d_off, buf, len / 2); + pos += len / 2; + + if (len & 1) + HFA384X_OUTB(*((char *) pos), d_off); + + return 0; +} + + +/* FIX: This might change at some point.. */ +#include "hostap_hw.c" + + +static void prism2_plx_cor_sreset(local_info_t *local) +{ + unsigned char corsave; + struct hostap_plx_priv *hw_priv = local->hw_priv; + + printk(KERN_DEBUG "%s: Doing reset via direct COR access.\n", + dev_info); + + /* Set sreset bit of COR and clear it after hold time */ + + if (hw_priv->attr_mem == NULL) { + /* TMD7160 - COR at card's first I/O addr */ + corsave = inb(hw_priv->cor_offset); + outb(corsave | COR_SRESET, hw_priv->cor_offset); + mdelay(2); + outb(corsave & ~COR_SRESET, hw_priv->cor_offset); + mdelay(2); + } else { + /* PLX9052 */ + corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); + writeb(corsave | COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(2); + writeb(corsave & ~COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(2); + } +} + + +static void prism2_plx_genesis_reset(local_info_t *local, int hcr) +{ + unsigned char corsave; + struct hostap_plx_priv *hw_priv = local->hw_priv; + + if (hw_priv->attr_mem == NULL) { + /* TMD7160 - COR at card's first I/O addr */ + corsave = inb(hw_priv->cor_offset); + outb(corsave | COR_SRESET, hw_priv->cor_offset); + mdelay(10); + outb(hcr, hw_priv->cor_offset + 2); + mdelay(10); + outb(corsave & ~COR_SRESET, hw_priv->cor_offset); + mdelay(10); + } else { + /* PLX9052 */ + corsave = readb(hw_priv->attr_mem + hw_priv->cor_offset); + writeb(corsave | COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(10); + writeb(hcr, hw_priv->attr_mem + hw_priv->cor_offset + 2); + mdelay(10); + writeb(corsave & ~COR_SRESET, + hw_priv->attr_mem + hw_priv->cor_offset); + mdelay(10); + } +} + + +static struct prism2_helper_functions prism2_plx_funcs = +{ + .card_present = NULL, + .cor_sreset = prism2_plx_cor_sreset, + .dev_open = NULL, + .dev_close = NULL, + .genesis_reset = prism2_plx_genesis_reset, + .hw_type = HOSTAP_HW_PLX, +}; + + +static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, + unsigned int *cor_offset, + unsigned int *cor_index) +{ +#define CISTPL_CONFIG 0x1A +#define CISTPL_MANFID 0x20 +#define CISTPL_END 0xFF +#define CIS_MAX_LEN 256 + u8 *cis; + int i, pos; + unsigned int rmsz, rasz, manfid1, manfid2; + struct prism2_plx_manfid *manfid; + + cis = kmalloc(CIS_MAX_LEN, GFP_KERNEL); + if (cis == NULL) + return -ENOMEM; + + /* read CIS; it is in even offsets in the beginning of attr_mem */ + for (i = 0; i < CIS_MAX_LEN; i++) + cis[i] = readb(attr_mem + 2 * i); + printk(KERN_DEBUG "%s: CIS: %02x %02x %02x %02x %02x %02x ...\n", + dev_info, cis[0], cis[1], cis[2], cis[3], cis[4], cis[5]); + + /* set reasonable defaults for Prism2 cards just in case CIS parsing + * fails */ + *cor_offset = 0x3e0; + *cor_index = 0x01; + manfid1 = manfid2 = 0; + + pos = 0; + while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { + if (pos + cis[pos + 1] >= CIS_MAX_LEN) + goto cis_error; + + switch (cis[pos]) { + case CISTPL_CONFIG: + if (cis[pos + 1] < 1) + goto cis_error; + rmsz = (cis[pos + 2] & 0x3c) >> 2; + rasz = cis[pos + 2] & 0x03; + if (4 + rasz + rmsz > cis[pos + 1]) + goto cis_error; + *cor_index = cis[pos + 3] & 0x3F; + *cor_offset = 0; + for (i = 0; i <= rasz; i++) + *cor_offset += cis[pos + 4 + i] << (8 * i); + printk(KERN_DEBUG "%s: cor_index=0x%x " + "cor_offset=0x%x\n", dev_info, + *cor_index, *cor_offset); + if (*cor_offset > attr_len) { + printk(KERN_ERR "%s: COR offset not within " + "attr_mem\n", dev_info); + kfree(cis); + return -1; + } + break; + + case CISTPL_MANFID: + if (cis[pos + 1] < 4) + goto cis_error; + manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); + manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); + printk(KERN_DEBUG "%s: manfid=0x%04x, 0x%04x\n", + dev_info, manfid1, manfid2); + break; + } + + pos += cis[pos + 1] + 2; + } + + if (pos >= CIS_MAX_LEN || cis[pos] != CISTPL_END) + goto cis_error; + + for (manfid = prism2_plx_known_manfids; manfid->manfid1 != 0; manfid++) + if (manfid1 == manfid->manfid1 && manfid2 == manfid->manfid2) { + kfree(cis); + return 0; + } + + printk(KERN_INFO "%s: unknown manfid 0x%04x, 0x%04x - assuming this is" + " not supported card\n", dev_info, manfid1, manfid2); + goto fail; + + cis_error: + printk(KERN_WARNING "%s: invalid CIS data\n", dev_info); + + fail: + kfree(cis); + if (ignore_cis) { + printk(KERN_INFO "%s: ignore_cis parameter set - ignoring " + "errors during CIS verification\n", dev_info); + return 0; + } + return -1; +} + + +static int prism2_plx_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned int pccard_ioaddr, plx_ioaddr; + unsigned long pccard_attr_mem; + unsigned int pccard_attr_len; + void __iomem *attr_mem = NULL; + unsigned int cor_offset, cor_index; + u32 reg; + local_info_t *local = NULL; + struct net_device *dev = NULL; + struct hostap_interface *iface; + static int cards_found /* = 0 */; + int irq_registered = 0; + int tmd7160; + struct hostap_plx_priv *hw_priv; + + hw_priv = kmalloc(sizeof(*hw_priv), GFP_KERNEL); + if (hw_priv == NULL) + return -ENOMEM; + memset(hw_priv, 0, sizeof(*hw_priv)); + + if (pci_enable_device(pdev)) + return -EIO; + + /* National Datacomm NCP130 based on TMD7160, not PLX9052. */ + tmd7160 = (pdev->vendor == 0x15e8) && (pdev->device == 0x0131); + + plx_ioaddr = pci_resource_start(pdev, 1); + pccard_ioaddr = pci_resource_start(pdev, tmd7160 ? 2 : 3); + + if (tmd7160) { + /* TMD7160 */ + attr_mem = NULL; /* no access to PC Card attribute memory */ + + printk(KERN_INFO "TMD7160 PCI/PCMCIA adapter: io=0x%x, " + "irq=%d, pccard_io=0x%x\n", + plx_ioaddr, pdev->irq, pccard_ioaddr); + + cor_offset = plx_ioaddr; + cor_index = 0x04; + + outb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, plx_ioaddr); + mdelay(1); + reg = inb(plx_ioaddr); + if (reg != (cor_index | COR_LEVLREQ | COR_ENABLE_FUNC)) { + printk(KERN_ERR "%s: Error setting COR (expected=" + "0x%02x, was=0x%02x)\n", dev_info, + cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, reg); + goto fail; + } + } else { + /* PLX9052 */ + pccard_attr_mem = pci_resource_start(pdev, 2); + pccard_attr_len = pci_resource_len(pdev, 2); + if (pccard_attr_len < PLX_MIN_ATTR_LEN) + goto fail; + + + attr_mem = ioremap(pccard_attr_mem, pccard_attr_len); + if (attr_mem == NULL) { + printk(KERN_ERR "%s: cannot remap attr_mem\n", + dev_info); + goto fail; + } + + printk(KERN_INFO "PLX9052 PCI/PCMCIA adapter: " + "mem=0x%lx, plx_io=0x%x, irq=%d, pccard_io=0x%x\n", + pccard_attr_mem, plx_ioaddr, pdev->irq, pccard_ioaddr); + + if (prism2_plx_check_cis(attr_mem, pccard_attr_len, + &cor_offset, &cor_index)) { + printk(KERN_INFO "Unknown PC Card CIS - not a " + "Prism2/2.5 card?\n"); + goto fail; + } + + printk(KERN_DEBUG "Prism2/2.5 PC Card detected in PLX9052 " + "adapter\n"); + + /* Write COR to enable PC Card */ + writeb(cor_index | COR_LEVLREQ | COR_ENABLE_FUNC, + attr_mem + cor_offset); + + /* Enable PCI interrupts if they are not already enabled */ + reg = inl(plx_ioaddr + PLX_INTCSR); + printk(KERN_DEBUG "PLX_INTCSR=0x%x\n", reg); + if (!(reg & PLX_INTCSR_PCI_INTEN)) { + outl(reg | PLX_INTCSR_PCI_INTEN, + plx_ioaddr + PLX_INTCSR); + if (!(inl(plx_ioaddr + PLX_INTCSR) & + PLX_INTCSR_PCI_INTEN)) { + printk(KERN_WARNING "%s: Could not enable " + "Local Interrupts\n", dev_info); + goto fail; + } + } + + reg = inl(plx_ioaddr + PLX_CNTRL); + printk(KERN_DEBUG "PLX_CNTRL=0x%x (Serial EEPROM " + "present=%d)\n", + reg, (reg & PLX_CNTRL_SERIAL_EEPROM_PRESENT) != 0); + /* should set PLX_PCIIPR to 0x01 (INTA#) if Serial EEPROM is + * not present; but are there really such cards in use(?) */ + } + + dev = prism2_init_local_data(&prism2_plx_funcs, cards_found, + &pdev->dev); + if (dev == NULL) + goto fail; + iface = netdev_priv(dev); + local = iface->local; + local->hw_priv = hw_priv; + cards_found++; + + dev->irq = pdev->irq; + dev->base_addr = pccard_ioaddr; + hw_priv->attr_mem = attr_mem; + hw_priv->cor_offset = cor_offset; + + pci_set_drvdata(pdev, dev); + + if (request_irq(dev->irq, prism2_interrupt, SA_SHIRQ, dev->name, + dev)) { + printk(KERN_WARNING "%s: request_irq failed\n", dev->name); + goto fail; + } else + irq_registered = 1; + + if (prism2_hw_config(dev, 1)) { + printk(KERN_DEBUG "%s: hardware initialization failed\n", + dev_info); + goto fail; + } + + return hostap_hw_ready(dev); + + fail: + kfree(hw_priv); + if (local) + local->hw_priv = NULL; + prism2_free_local_data(dev); + + if (irq_registered && dev) + free_irq(dev->irq, dev); + + if (attr_mem) + iounmap(attr_mem); + + pci_disable_device(pdev); + + return -ENODEV; +} + + +static void prism2_plx_remove(struct pci_dev *pdev) +{ + struct net_device *dev; + struct hostap_interface *iface; + struct hostap_plx_priv *hw_priv; + + dev = pci_get_drvdata(pdev); + iface = netdev_priv(dev); + hw_priv = iface->local->hw_priv; + + /* Reset the hardware, and ensure interrupts are disabled. */ + prism2_plx_cor_sreset(iface->local); + hfa384x_disable_interrupts(dev); + + if (hw_priv->attr_mem) + iounmap(hw_priv->attr_mem); + if (dev->irq) + free_irq(dev->irq, dev); + + kfree(iface->local->hw_priv); + iface->local->hw_priv = NULL; + prism2_free_local_data(dev); + pci_disable_device(pdev); +} + + +MODULE_DEVICE_TABLE(pci, prism2_plx_id_table); + +static struct pci_driver prism2_plx_drv_id = { + .name = "prism2_plx", + .id_table = prism2_plx_id_table, + .probe = prism2_plx_probe, + .remove = prism2_plx_remove, + .suspend = NULL, + .resume = NULL, + .enable_wake = NULL +}; + + +static int __init init_prism2_plx(void) +{ + printk(KERN_INFO "%s: %s\n", dev_info, version); + + return pci_register_driver(&prism2_plx_drv_id); +} + + +static void __exit exit_prism2_plx(void) +{ + pci_unregister_driver(&prism2_plx_drv_id); + printk(KERN_INFO "%s: Driver unloaded\n", dev_info); +} + + +module_init(init_prism2_plx); +module_exit(exit_prism2_plx); |
