diff options
Diffstat (limited to 'drivers/net/wireless/ath5k/phy.c')
| -rw-r--r-- | drivers/net/wireless/ath5k/phy.c | 3197 |
1 files changed, 1645 insertions, 1552 deletions
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 7ba18e09463b..9e2faae5ae94 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -2,8 +2,9 @@ * PHY functions * * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -26,1138 +27,193 @@ #include "ath5k.h" #include "reg.h" #include "base.h" - -/* Struct to hold initial RF register values (RF Banks) */ -struct ath5k_ini_rf { - u8 rf_bank; /* check out ath5k_reg.h */ - u16 rf_register; /* register address */ - u32 rf_value[5]; /* register value for different modes (above) */ -}; - -/* - * Mode-specific RF Gain table (64bytes) for RF5111/5112 - * (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial - * RF Gain values are included in AR5K_AR5210_INI) - */ -struct ath5k_ini_rfgain { - u16 rfg_register; /* RF Gain register address */ - u32 rfg_value[2]; /* [freq (see below)] */ -}; - -struct ath5k_gain_opt { - u32 go_default; - u32 go_steps_count; - const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT]; -}; - -/* RF5111 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5111[] = { - { 0, 0x989c, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 0, 0x989c, - { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } }, - { 0, 0x989c, - { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } }, - { 0, 0x98d4, - { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } }, - { 1, 0x98d4, - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d4, - { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } }, - { 3, 0x98d8, - { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } }, - { 6, 0x989c, - { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } }, - { 6, 0x989c, - { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } }, - { 6, 0x989c, - { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } }, - { 6, 0x989c, - { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } }, - { 6, 0x989c, - { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } }, - { 6, 0x98d4, - { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } }, - { 7, 0x989c, - { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } }, - { 7, 0x989c, - { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } }, - { 7, 0x989c, - { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, - { 7, 0x989c, - { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } }, - { 7, 0x989c, - { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } }, - { 7, 0x989c, - { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } }, - { 7, 0x989c, - { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } }, -}; - -/* Initial RF Gain settings for RF5111 */ -static const struct ath5k_ini_rfgain rfgain_5111[] = { - /* 5Ghz 2Ghz */ - { AR5K_RF_GAIN(0), { 0x000001a9, 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x000001e9, 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000029, 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x00000069, 0x00000150 } }, - { AR5K_RF_GAIN(4), { 0x00000199, 0x00000190 } }, - { AR5K_RF_GAIN(5), { 0x000001d9, 0x000001d0 } }, - { AR5K_RF_GAIN(6), { 0x00000019, 0x00000010 } }, - { AR5K_RF_GAIN(7), { 0x00000059, 0x00000044 } }, - { AR5K_RF_GAIN(8), { 0x00000099, 0x00000084 } }, - { AR5K_RF_GAIN(9), { 0x000001a5, 0x00000148 } }, - { AR5K_RF_GAIN(10), { 0x000001e5, 0x00000188 } }, - { AR5K_RF_GAIN(11), { 0x00000025, 0x000001c8 } }, - { AR5K_RF_GAIN(12), { 0x000001c8, 0x00000014 } }, - { AR5K_RF_GAIN(13), { 0x00000008, 0x00000042 } }, - { AR5K_RF_GAIN(14), { 0x00000048, 0x00000082 } }, - { AR5K_RF_GAIN(15), { 0x00000088, 0x00000178 } }, - { AR5K_RF_GAIN(16), { 0x00000198, 0x000001b8 } }, - { AR5K_RF_GAIN(17), { 0x000001d8, 0x000001f8 } }, - { AR5K_RF_GAIN(18), { 0x00000018, 0x00000012 } }, - { AR5K_RF_GAIN(19), { 0x00000058, 0x00000052 } }, - { AR5K_RF_GAIN(20), { 0x00000098, 0x00000092 } }, - { AR5K_RF_GAIN(21), { 0x000001a4, 0x0000017c } }, - { AR5K_RF_GAIN(22), { 0x000001e4, 0x000001bc } }, - { AR5K_RF_GAIN(23), { 0x00000024, 0x000001fc } }, - { AR5K_RF_GAIN(24), { 0x00000064, 0x0000000a } }, - { AR5K_RF_GAIN(25), { 0x000000a4, 0x0000004a } }, - { AR5K_RF_GAIN(26), { 0x000000e4, 0x0000008a } }, - { AR5K_RF_GAIN(27), { 0x0000010a, 0x0000015a } }, - { AR5K_RF_GAIN(28), { 0x0000014a, 0x0000019a } }, - { AR5K_RF_GAIN(29), { 0x0000018a, 0x000001da } }, - { AR5K_RF_GAIN(30), { 0x000001ca, 0x0000000e } }, - { AR5K_RF_GAIN(31), { 0x0000000a, 0x0000004e } }, - { AR5K_RF_GAIN(32), { 0x0000004a, 0x0000008e } }, - { AR5K_RF_GAIN(33), { 0x0000008a, 0x0000015e } }, - { AR5K_RF_GAIN(34), { 0x000001ba, 0x0000019e } }, - { AR5K_RF_GAIN(35), { 0x000001fa, 0x000001de } }, - { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000009 } }, - { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000049 } }, - { AR5K_RF_GAIN(38), { 0x00000186, 0x00000089 } }, - { AR5K_RF_GAIN(39), { 0x000001c6, 0x00000179 } }, - { AR5K_RF_GAIN(40), { 0x00000006, 0x000001b9 } }, - { AR5K_RF_GAIN(41), { 0x00000046, 0x000001f9 } }, - { AR5K_RF_GAIN(42), { 0x00000086, 0x00000039 } }, - { AR5K_RF_GAIN(43), { 0x000000c6, 0x00000079 } }, - { AR5K_RF_GAIN(44), { 0x000000c6, 0x000000b9 } }, - { AR5K_RF_GAIN(45), { 0x000000c6, 0x000001bd } }, - { AR5K_RF_GAIN(46), { 0x000000c6, 0x000001fd } }, - { AR5K_RF_GAIN(47), { 0x000000c6, 0x0000003d } }, - { AR5K_RF_GAIN(48), { 0x000000c6, 0x0000007d } }, - { AR5K_RF_GAIN(49), { 0x000000c6, 0x000000bd } }, - { AR5K_RF_GAIN(50), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(51), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(52), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(53), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(54), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(55), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(56), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(57), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(58), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(59), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(60), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(61), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(62), { 0x000000c6, 0x000000fd } }, - { AR5K_RF_GAIN(63), { 0x000000c6, 0x000000fd } }, -}; - -static const struct ath5k_gain_opt rfgain_opt_5111 = { - 4, - 9, - { - { { 4, 1, 1, 1 }, 6 }, - { { 4, 0, 1, 1 }, 4 }, - { { 3, 1, 1, 1 }, 3 }, - { { 4, 0, 0, 1 }, 1 }, - { { 4, 1, 1, 0 }, 0 }, - { { 4, 0, 1, 0 }, -2 }, - { { 3, 1, 1, 0 }, -3 }, - { { 4, 0, 0, 0 }, -4 }, - { { 2, 1, 1, 0 }, -6 } - } -}; - -/* RF5112 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5112[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, - { 3, 0x98dc, - { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, - { 6, 0x989c, - { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } }, - { 6, 0x989c, - { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } }, - { 6, 0x989c, - { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } }, - { 6, 0x989c, - { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } }, - { 6, 0x989c, - { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, - { 6, 0x989c, - { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } }, - { 6, 0x989c, - { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } }, - { 6, 0x989c, - { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, - { 6, 0x989c, - { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } }, - { 6, 0x989c, - { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } }, - { 6, 0x989c, - { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } }, - { 6, 0x989c, - { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } }, - { 6, 0x989c, - { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } }, - { 6, 0x989c, - { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } }, - { 6, 0x989c, - { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } }, - { 6, 0x989c, - { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } }, - { 6, 0x989c, - { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } }, - { 6, 0x989c, - { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } }, - { 6, 0x989c, - { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } }, - { 6, 0x989c, - { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } }, - { 6, 0x989c, - { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } }, - { 6, 0x98d0, - { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } }, - { 7, 0x989c, - { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, - { 7, 0x989c, - { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, - { 7, 0x989c, - { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } }, - { 7, 0x989c, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { 7, 0x989c, - { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } }, - { 7, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 7, 0x989c, - { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, 0x989c, - { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } }, - { 7, 0x989c, - { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } }, - { 7, 0x989c, - { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, 0x989c, - { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, 0x989c, - { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, 0x98c4, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, -}; - -/* RF5112A mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5112a[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } }, - { 3, 0x98dc, - { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } }, - { 6, 0x989c, - { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } }, - { 6, 0x989c, - { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } }, - { 6, 0x989c, - { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } }, - { 6, 0x989c, - { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } }, - { 6, 0x989c, - { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } }, - { 6, 0x989c, - { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } }, - { 6, 0x989c, - { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } }, - { 6, 0x989c, - { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } }, - { 6, 0x989c, - { 0x00190000, 0x00190000, 0x00190000, 0x00190000, 0x00190000 } }, - { 6, 0x989c, - { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } }, - { 6, 0x989c, - { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } }, - { 6, 0x989c, - { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } }, - { 6, 0x989c, - { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } }, - { 6, 0x989c, - { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, 0x989c, - { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } }, - { 6, 0x989c, - { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } }, - { 6, 0x989c, - { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } }, - { 6, 0x989c, - { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } }, - { 6, 0x989c, - { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } }, - { 6, 0x989c, - { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } }, - { 6, 0x989c, - { 0x00020080, 0x00020080, 0x00020080, 0x00020080, 0x00020080 } }, - { 6, 0x989c, - { 0x00080009, 0x00080009, 0x00080009, 0x00080009, 0x00080009 } }, - { 6, 0x989c, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } }, - { 6, 0x989c, - { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } }, - { 6, 0x989c, - { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } }, - { 6, 0x989c, - { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } }, - { 6, 0x989c, - { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } }, - { 6, 0x98d8, - { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } }, - { 7, 0x989c, - { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } }, - { 7, 0x989c, - { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } }, - { 7, 0x989c, - { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } }, - { 7, 0x989c, - { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } }, - { 7, 0x989c, - { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } }, - { 7, 0x989c, - { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } }, - { 7, 0x989c, - { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, 0x989c, - { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } }, - { 7, 0x989c, - { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } }, - { 7, 0x989c, - { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, 0x989c, - { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, 0x989c, - { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, 0x98c4, - { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } }, -}; - - -static const struct ath5k_ini_rf rfregs_2112a[] = { - { 1, AR5K_RF_BUFFER_CONTROL_4, - /* mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020 } }, - { 2, AR5K_RF_BUFFER_CONTROL_3, - { 0x03060408, 0x03060408, 0x03070408 } }, - { 3, AR5K_RF_BUFFER_CONTROL_6, - { 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, AR5K_RF_BUFFER, - { 0x0a000000, 0x0a000000, 0x0a000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00800000, 0x00800000, 0x00800000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00010000, 0x00010000, 0x00010000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00180000, 0x00180000, 0x00180000 } }, - { 6, AR5K_RF_BUFFER, - { 0x006e0000, 0x006e0000, 0x006e0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00c70000, 0x00c70000, 0x00c70000 } }, - { 6, AR5K_RF_BUFFER, - { 0x004b0000, 0x004b0000, 0x004b0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x04480000, 0x04480000, 0x04480000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00e40000, 0x00e40000, 0x00e40000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00fc0000, 0x00fc0000, 0x00fc0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x043f0000, 0x043f0000, 0x043f0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x0c0c0000, 0x0c0c0000, 0x0c0c0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x02190000, 0x02190000, 0x02190000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00240000, 0x00240000, 0x00240000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00b40000, 0x00b40000, 0x00b40000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00990000, 0x00990000, 0x00990000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00500000, 0x00500000, 0x00500000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00120000, 0x00120000, 0x00120000 } }, - { 6, AR5K_RF_BUFFER, - { 0xc0320000, 0xc0320000, 0xc0320000 } }, - { 6, AR5K_RF_BUFFER, - { 0x01740000, 0x01740000, 0x01740000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00110000, 0x00110000, 0x00110000 } }, - { 6, AR5K_RF_BUFFER, - { 0x86280000, 0x86280000, 0x86280000 } }, - { 6, AR5K_RF_BUFFER, - { 0x31840000, 0x31840000, 0x31840000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00f20080, 0x00f20080, 0x00f20080 } }, - { 6, AR5K_RF_BUFFER, - { 0x00070019, 0x00070019, 0x00070019 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x000000b2, 0x000000b2, 0x000000b2 } }, - { 6, AR5K_RF_BUFFER, - { 0x00b02184, 0x00b02184, 0x00b02184 } }, - { 6, AR5K_RF_BUFFER, - { 0x004125a4, 0x004125a4, 0x004125a4 } }, - { 6, AR5K_RF_BUFFER, - { 0x00119220, 0x00119220, 0x00119220 } }, - { 6, AR5K_RF_BUFFER, - { 0x001a4800, 0x001a4800, 0x001a4800 } }, - { 6, AR5K_RF_BUFFER_CONTROL_5, - { 0x000b0230, 0x000b0230, 0x000b0230 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000094, 0x00000094, 0x00000094 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000091, 0x00000091, 0x00000091 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000012, 0x00000012, 0x00000012 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000080, 0x00000080, 0x00000080 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000d9, 0x000000d9, 0x000000d9 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000060, 0x00000060, 0x00000060 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000f0, 0x000000f0, 0x000000f0 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000a2, 0x000000a2, 0x000000a2 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000052, 0x00000052, 0x00000052 } }, - { 7, AR5K_RF_BUFFER, - { 0x000000d4, 0x000000d4, 0x000000d4 } }, - { 7, AR5K_RF_BUFFER, - { 0x000014cc, 0x000014cc, 0x000014cc } }, - { 7, AR5K_RF_BUFFER, - { 0x0000048c, 0x0000048c, 0x0000048c } }, - { 7, AR5K_RF_BUFFER_CONTROL_1, - { 0x00000003, 0x00000003, 0x00000003 } }, -}; - -/* RF5413/5414 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_5413[] = { - { 1, 0x98d4, - /* mode a/XR mode aTurbo mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } }, - { 2, 0x98d0, - { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } }, - { 3, 0x98dc, - { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } }, - { 6, 0x989c, - { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } }, - { 6, 0x989c, - { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } }, - { 6, 0x989c, - { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } }, - { 6, 0x989c, - { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } }, - { 6, 0x989c, - { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, - { 6, 0x989c, - { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } }, - { 6, 0x989c, - { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } }, - { 6, 0x989c, - { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } }, - { 6, 0x989c, - { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } }, - { 6, 0x989c, - { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } }, - { 6, 0x989c, - { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } }, - { 6, 0x989c, - { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } }, - { 6, 0x989c, - { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } }, - { 6, 0x989c, - { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } }, - { 6, 0x989c, - { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } }, - { 6, 0x989c, - { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } }, - { 6, 0x989c, - { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } }, - { 6, 0x989c, - { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } }, - { 6, 0x989c, - { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } }, - { 6, 0x989c, - { 0x00510040, 0x00510040, 0x005100a0, 0x005100a0, 0x005100a0 } }, - { 6, 0x989c, - { 0x0050006a, 0x0050006a, 0x005000dd, 0x005000dd, 0x005000dd } }, - { 6, 0x989c, - { 0x00000001, 0x00000001, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } }, - { 6, 0x989c, - { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } }, - { 6, 0x989c, - { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } }, - { 6, 0x989c, - { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00003600 } }, - { 6, 0x98c8, - { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } }, - { 7, 0x989c, - { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } }, - { 7, 0x989c, - { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } }, - { 7, 0x98cc, - { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } }, -}; - -/* RF2413/2414 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_2413[] = { - { 1, AR5K_RF_BUFFER_CONTROL_4, - /* mode b mode g mode gTurbo */ - { 0x00000020, 0x00000020, 0x00000020 } }, - { 2, AR5K_RF_BUFFER_CONTROL_3, - { 0x02001408, 0x02001408, 0x02001408 } }, - { 3, AR5K_RF_BUFFER_CONTROL_6, - { 0x00e020c0, 0x00e020c0, 0x00e020c0 } }, - { 6, AR5K_RF_BUFFER, - { 0xf0000000, 0xf0000000, 0xf0000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x03000000, 0x03000000, 0x03000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x40400000, 0x40400000, 0x40400000 } }, - { 6, AR5K_RF_BUFFER, - { 0x65050000, 0x65050000, 0x65050000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00420000, 0x00420000, 0x00420000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00b50000, 0x00b50000, 0x00b50000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00030000, 0x00030000, 0x00030000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00f70000, 0x00f70000, 0x00f70000 } }, - { 6, AR5K_RF_BUFFER, - { 0x009d0000, 0x009d0000, 0x009d0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00220000, 0x00220000, 0x00220000 } }, - { 6, AR5K_RF_BUFFER, - { 0x04220000, 0x04220000, 0x04220000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00230018, 0x00230018, 0x00230018 } }, - { 6, AR5K_RF_BUFFER, - { 0x00280050, 0x00280050, 0x00280050 } }, - { 6, AR5K_RF_BUFFER, - { 0x005000c3, 0x005000c3, 0x005000c3 } }, - { 6, AR5K_RF_BUFFER, - { 0x0004007f, 0x0004007f, 0x0004007f } }, - { 6, AR5K_RF_BUFFER, - { 0x00000458, 0x00000458, 0x00000458 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x0000c000, 0x0000c000, 0x0000c000 } }, - { 6, AR5K_RF_BUFFER_CONTROL_5, - { 0x00400230, 0x00400230, 0x00400230 } }, - { 7, AR5K_RF_BUFFER, - { 0x00006400, 0x00006400, 0x00006400 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000800, 0x00000800, 0x00000800 } }, - { 7, AR5K_RF_BUFFER_CONTROL_2, - { 0x0000000e, 0x0000000e, 0x0000000e } }, -}; - -/* RF2425 mode-specific init registers */ -static const struct ath5k_ini_rf rfregs_2425[] = { - { 1, AR5K_RF_BUFFER_CONTROL_4, - /* mode g mode gTurbo */ - { 0x00000020, 0x00000020 } }, - { 2, AR5K_RF_BUFFER_CONTROL_3, - { 0x02001408, 0x02001408 } }, - { 3, AR5K_RF_BUFFER_CONTROL_6, - { 0x00e020c0, 0x00e020c0 } }, - { 6, AR5K_RF_BUFFER, - { 0x10000000, 0x10000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x002a0000, 0x002a0000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00100000, 0x00100000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00020000, 0x00020000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00730000, 0x00730000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00f80000, 0x00f80000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00e70000, 0x00e70000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00140000, 0x00140000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00910040, 0x00910040 } }, - { 6, AR5K_RF_BUFFER, - { 0x0007001a, 0x0007001a } }, - { 6, AR5K_RF_BUFFER, - { 0x00410000, 0x00410000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00810060, 0x00810060 } }, - { 6, AR5K_RF_BUFFER, - { 0x00020803, 0x00020803 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00000000, 0x00000000 } }, - { 6, AR5K_RF_BUFFER, - { 0x00001660, 0x00001660 } }, - { 6, AR5K_RF_BUFFER, - { 0x00001688, 0x00001688 } }, - { 6, AR5K_RF_BUFFER_CONTROL_1, - { 0x00000001, 0x00000001 } }, - { 7, AR5K_RF_BUFFER, - { 0x00006400, 0x00006400 } }, - { 7, AR5K_RF_BUFFER, - { 0x00000800, 0x00000800 } }, - { 7, AR5K_RF_BUFFER_CONTROL_2, - { 0x0000000e, 0x0000000e } }, -}; - -/* Initial RF Gain settings for RF5112 */ -static const struct ath5k_ini_rfgain rfgain_5112[] = { - /* 5Ghz 2Ghz */ - { AR5K_RF_GAIN(0), { 0x00000007, 0x00000007 } }, - { AR5K_RF_GAIN(1), { 0x00000047, 0x00000047 } }, - { AR5K_RF_GAIN(2), { 0x00000087, 0x00000087 } }, - { AR5K_RF_GAIN(3), { 0x000001a0, 0x000001a0 } }, - { AR5K_RF_GAIN(4), { 0x000001e0, 0x000001e0 } }, - { AR5K_RF_GAIN(5), { 0x00000020, 0x00000020 } }, - { AR5K_RF_GAIN(6), { 0x00000060, 0x00000060 } }, - { AR5K_RF_GAIN(7), { 0x000001a1, 0x000001a1 } }, - { AR5K_RF_GAIN(8), { 0x000001e1, 0x000001e1 } }, - { AR5K_RF_GAIN(9), { 0x00000021, 0x00000021 } }, - { AR5K_RF_GAIN(10), { 0x00000061, 0x00000061 } }, - { AR5K_RF_GAIN(11), { 0x00000162, 0x00000162 } }, - { AR5K_RF_GAIN(12), { 0x000001a2, 0x000001a2 } }, - { AR5K_RF_GAIN(13), { 0x000001e2, 0x000001e2 } }, - { AR5K_RF_GAIN(14), { 0x00000022, 0x00000022 } }, - { AR5K_RF_GAIN(15), { 0x00000062, 0x00000062 } }, - { AR5K_RF_GAIN(16), { 0x00000163, 0x00000163 } }, - { AR5K_RF_GAIN(17), { 0x000001a3, 0x000001a3 } }, - { AR5K_RF_GAIN(18), { 0x000001e3, 0x000001e3 } }, - { AR5K_RF_GAIN(19), { 0x00000023, 0x00000023 } }, - { AR5K_RF_GAIN(20), { 0x00000063, 0x00000063 } }, - { AR5K_RF_GAIN(21), { 0x00000184, 0x00000184 } }, - { AR5K_RF_GAIN(22), { 0x000001c4, 0x000001c4 } }, - { AR5K_RF_GAIN(23), { 0x00000004, 0x00000004 } }, - { AR5K_RF_GAIN(24), { 0x000001ea, 0x0000000b } }, - { AR5K_RF_GAIN(25), { 0x0000002a, 0x0000004b } }, - { AR5K_RF_GAIN(26), { 0x0000006a, 0x0000008b } }, - { AR5K_RF_GAIN(27), { 0x000000aa, 0x000001ac } }, - { AR5K_RF_GAIN(28), { 0x000001ab, 0x000001ec } }, - { AR5K_RF_GAIN(29), { 0x000001eb, 0x0000002c } }, - { AR5K_RF_GAIN(30), { 0x0000002b, 0x00000012 } }, - { AR5K_RF_GAIN(31), { 0x0000006b, 0x00000052 } }, - { AR5K_RF_GAIN(32), { 0x000000ab, 0x00000092 } }, - { AR5K_RF_GAIN(33), { 0x000001ac, 0x00000193 } }, - { AR5K_RF_GAIN(34), { 0x000001ec, 0x000001d3 } }, - { AR5K_RF_GAIN(35), { 0x0000002c, 0x00000013 } }, - { AR5K_RF_GAIN(36), { 0x0000003a, 0x00000053 } }, - { AR5K_RF_GAIN(37), { 0x0000007a, 0x00000093 } }, - { AR5K_RF_GAIN(38), { 0x000000ba, 0x00000194 } }, - { AR5K_RF_GAIN(39), { 0x000001bb, 0x000001d4 } }, - { AR5K_RF_GAIN(40), { 0x000001fb, 0x00000014 } }, - { AR5K_RF_GAIN(41), { 0x0000003b, 0x0000003a } }, - { AR5K_RF_GAIN(42), { 0x0000007b, 0x0000007a } }, - { AR5K_RF_GAIN(43), { 0x000000bb, 0x000000ba } }, - { AR5K_RF_GAIN(44), { 0x000001bc, 0x000001bb } }, - { AR5K_RF_GAIN(45), { 0x000001fc, 0x000001fb } }, - { AR5K_RF_GAIN(46), { 0x0000003c, 0x0000003b } }, - { AR5K_RF_GAIN(47), { 0x0000007c, 0x0000007b } }, - { AR5K_RF_GAIN(48), { 0x000000bc, 0x000000bb } }, - { AR5K_RF_GAIN(49), { 0x000000fc, 0x000001bc } }, - { AR5K_RF_GAIN(50), { 0x000000fc, 0x000001fc } }, - { AR5K_RF_GAIN(51), { 0x000000fc, 0x0000003c } }, - { AR5K_RF_GAIN(52), { 0x000000fc, 0x0000007c } }, - { AR5K_RF_GAIN(53), { 0x000000fc, 0x000000bc } }, - { AR5K_RF_GAIN(54), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(55), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(56), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(57), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(58), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(59), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(60), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(61), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(62), { 0x000000fc, 0x000000fc } }, - { AR5K_RF_GAIN(63), { 0x000000fc, 0x000000fc } }, -}; - -/* Initial RF Gain settings for RF5413 */ -static const struct ath5k_ini_rfgain rfgain_5413[] = { - /* 5Ghz 2Ghz */ - { AR5K_RF_GAIN(0), { 0x00000000, 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x00000040, 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000080, 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x000001a1, 0x00000161 } }, - { AR5K_RF_GAIN(4), { 0x000001e1, 0x000001a1 } }, - { AR5K_RF_GAIN(5), { 0x00000021, 0x000001e1 } }, - { AR5K_RF_GAIN(6), { 0x00000061, 0x00000021 } }, - { AR5K_RF_GAIN(7), { 0x00000188, 0x00000061 } }, - { AR5K_RF_GAIN(8), { 0x000001c8, 0x00000188 } }, - { AR5K_RF_GAIN(9), { 0x00000008, 0x000001c8 } }, - { AR5K_RF_GAIN(10), { 0x00000048, 0x00000008 } }, - { AR5K_RF_GAIN(11), { 0x00000088, 0x00000048 } }, - { AR5K_RF_GAIN(12), { 0x000001a9, 0x00000088 } }, - { AR5K_RF_GAIN(13), { 0x000001e9, 0x00000169 } }, - { AR5K_RF_GAIN(14), { 0x00000029, 0x000001a9 } }, - { AR5K_RF_GAIN(15), { 0x00000069, 0x000001e9 } }, - { AR5K_RF_GAIN(16), { 0x000001d0, 0x00000029 } }, - { AR5K_RF_GAIN(17), { 0x00000010, 0x00000069 } }, - { AR5K_RF_GAIN(18), { 0x00000050, 0x00000190 } }, - { AR5K_RF_GAIN(19), { 0x00000090, 0x000001d0 } }, - { AR5K_RF_GAIN(20), { 0x000001b1, 0x00000010 } }, - { AR5K_RF_GAIN(21), { 0x000001f1, 0x00000050 } }, - { AR5K_RF_GAIN(22), { 0x00000031, 0x00000090 } }, - { AR5K_RF_GAIN(23), { 0x00000071, 0x00000171 } }, - { AR5K_RF_GAIN(24), { 0x000001b8, 0x000001b1 } }, - { AR5K_RF_GAIN(25), { 0x000001f8, 0x000001f1 } }, - { AR5K_RF_GAIN(26), { 0x00000038, 0x00000031 } }, - { AR5K_RF_GAIN(27), { 0x00000078, 0x00000071 } }, - { AR5K_RF_GAIN(28), { 0x00000199, 0x00000198 } }, - { AR5K_RF_GAIN(29), { 0x000001d9, 0x000001d8 } }, - { AR5K_RF_GAIN(30), { 0x00000019, 0x00000018 } }, - { AR5K_RF_GAIN(31), { 0x00000059, 0x00000058 } }, - { AR5K_RF_GAIN(32), { 0x00000099, 0x00000098 } }, - { AR5K_RF_GAIN(33), { 0x000000d9, 0x00000179 } }, - { AR5K_RF_GAIN(34), { 0x000000f9, 0x000001b9 } }, - { AR5K_RF_GAIN(35), { 0x000000f9, 0x000001f9 } }, - { AR5K_RF_GAIN(36), { 0x000000f9, 0x00000039 } }, - { AR5K_RF_GAIN(37), { 0x000000f9, 0x00000079 } }, - { AR5K_RF_GAIN(38), { 0x000000f9, 0x000000b9 } }, - { AR5K_RF_GAIN(39), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(40), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(41), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(42), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(43), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(44), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(45), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(46), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(47), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(48), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(49), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(50), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(51), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(52), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(53), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(54), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(55), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(56), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(57), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(58), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(59), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(60), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(61), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(62), { 0x000000f9, 0x000000f9 } }, - { AR5K_RF_GAIN(63), { 0x000000f9, 0x000000f9 } }, -}; - -/* Initial RF Gain settings for RF2413 */ -static const struct ath5k_ini_rfgain rfgain_2413[] = { - { AR5K_RF_GAIN(0), { 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x00000181 } }, - { AR5K_RF_GAIN(4), { 0x000001c1 } }, - { AR5K_RF_GAIN(5), { 0x00000001 } }, - { AR5K_RF_GAIN(6), { 0x00000041 } }, - { AR5K_RF_GAIN(7), { 0x00000081 } }, - { AR5K_RF_GAIN(8), { 0x00000168 } }, - { AR5K_RF_GAIN(9), { 0x000001a8 } }, - { AR5K_RF_GAIN(10), { 0x000001e8 } }, - { AR5K_RF_GAIN(11), { 0x00000028 } }, - { AR5K_RF_GAIN(12), { 0x00000068 } }, - { AR5K_RF_GAIN(13), { 0x00000189 } }, - { AR5K_RF_GAIN(14), { 0x000001c9 } }, - { AR5K_RF_GAIN(15), { 0x00000009 } }, - { AR5K_RF_GAIN(16), { 0x00000049 } }, - { AR5K_RF_GAIN(17), { 0x00000089 } }, - { AR5K_RF_GAIN(18), { 0x00000190 } }, - { AR5K_RF_GAIN(19), { 0x000001d0 } }, - { AR5K_RF_GAIN(20), { 0x00000010 } }, - { AR5K_RF_GAIN(21), { 0x00000050 } }, - { AR5K_RF_GAIN(22), { 0x00000090 } }, - { AR5K_RF_GAIN(23), { 0x00000191 } }, - { AR5K_RF_GAIN(24), { 0x000001d1 } }, - { AR5K_RF_GAIN(25), { 0x00000011 } }, - { AR5K_RF_GAIN(26), { 0x00000051 } }, - { AR5K_RF_GAIN(27), { 0x00000091 } }, - { AR5K_RF_GAIN(28), { 0x00000178 } }, - { AR5K_RF_GAIN(29), { 0x000001b8 } }, - { AR5K_RF_GAIN(30), { 0x000001f8 } }, - { AR5K_RF_GAIN(31), { 0x00000038 } }, - { AR5K_RF_GAIN(32), { 0x00000078 } }, - { AR5K_RF_GAIN(33), { 0x00000199 } }, - { AR5K_RF_GAIN(34), { 0x000001d9 } }, - { AR5K_RF_GAIN(35), { 0x00000019 } }, - { AR5K_RF_GAIN(36), { 0x00000059 } }, - { AR5K_RF_GAIN(37), { 0x00000099 } }, - { AR5K_RF_GAIN(38), { 0x000000d9 } }, - { AR5K_RF_GAIN(39), { 0x000000f9 } }, - { AR5K_RF_GAIN(40), { 0x000000f9 } }, - { AR5K_RF_GAIN(41), { 0x000000f9 } }, - { AR5K_RF_GAIN(42), { 0x000000f9 } }, - { AR5K_RF_GAIN(43), { 0x000000f9 } }, - { AR5K_RF_GAIN(44), { 0x000000f9 } }, - { AR5K_RF_GAIN(45), { 0x000000f9 } }, - { AR5K_RF_GAIN(46), { 0x000000f9 } }, - { AR5K_RF_GAIN(47), { 0x000000f9 } }, - { AR5K_RF_GAIN(48), { 0x000000f9 } }, - { AR5K_RF_GAIN(49), { 0x000000f9 } }, - { AR5K_RF_GAIN(50), { 0x000000f9 } }, - { AR5K_RF_GAIN(51), { 0x000000f9 } }, - { AR5K_RF_GAIN(52), { 0x000000f9 } }, - { AR5K_RF_GAIN(53), { 0x000000f9 } }, - { AR5K_RF_GAIN(54), { 0x000000f9 } }, - { AR5K_RF_GAIN(55), { 0x000000f9 } }, - { AR5K_RF_GAIN(56), { 0x000000f9 } }, - { AR5K_RF_GAIN(57), { 0x000000f9 } }, - { AR5K_RF_GAIN(58), { 0x000000f9 } }, - { AR5K_RF_GAIN(59), { 0x000000f9 } }, - { AR5K_RF_GAIN(60), { 0x000000f9 } }, - { AR5K_RF_GAIN(61), { 0x000000f9 } }, - { AR5K_RF_GAIN(62), { 0x000000f9 } }, - { AR5K_RF_GAIN(63), { 0x000000f9 } }, -}; - -/* Initial RF Gain settings for RF2425 */ -static const struct ath5k_ini_rfgain rfgain_2425[] = { - { AR5K_RF_GAIN(0), { 0x00000000 } }, - { AR5K_RF_GAIN(1), { 0x00000040 } }, - { AR5K_RF_GAIN(2), { 0x00000080 } }, - { AR5K_RF_GAIN(3), { 0x00000181 } }, - { AR5K_RF_GAIN(4), { 0x000001c1 } }, - { AR5K_RF_GAIN(5), { 0x00000001 } }, - { AR5K_RF_GAIN(6), { 0x00000041 } }, - { AR5K_RF_GAIN(7), { 0x00000081 } }, - { AR5K_RF_GAIN(8), { 0x00000188 } }, - { AR5K_RF_GAIN(9), { 0x000001c8 } }, - { AR5K_RF_GAIN(10), { 0x00000008 } }, - { AR5K_RF_GAIN(11), { 0x00000048 } }, - { AR5K_RF_GAIN(12), { 0x00000088 } }, - { AR5K_RF_GAIN(13), { 0x00000189 } }, - { AR5K_RF_GAIN(14), { 0x000001c9 } }, - { AR5K_RF_GAIN(15), { 0x00000009 } }, - { AR5K_RF_GAIN(16), { 0x00000049 } }, - { AR5K_RF_GAIN(17), { 0x00000089 } }, - { AR5K_RF_GAIN(18), { 0x000001b0 } }, - { AR5K_RF_GAIN(19), { 0x000001f0 } }, - { AR5K_RF_GAIN(20), { 0x00000030 } }, - { AR5K_RF_GAIN(21), { 0x00000070 } }, - { AR5K_RF_GAIN(22), { 0x00000171 } }, - { AR5K_RF_GAIN(23), { 0x000001b1 } }, - { AR5K_RF_GAIN(24), { 0x000001f1 } }, - { AR5K_RF_GAIN(25), { 0x00000031 } }, - { AR5K_RF_GAIN(26), { 0x00000071 } }, - { AR5K_RF_GAIN(27), { 0x000001b8 } }, - { AR5K_RF_GAIN(28), { 0x000001f8 } }, - { AR5K_RF_GAIN(29), { 0x00000038 } }, - { AR5K_RF_GAIN(30), { 0x00000078 } }, - { AR5K_RF_GAIN(31), { 0x000000b8 } }, - { AR5K_RF_GAIN(32), { 0x000001b9 } }, - { AR5K_RF_GAIN(33), { 0x000001f9 } }, - { AR5K_RF_GAIN(34), { 0x00000039 } }, - { AR5K_RF_GAIN(35), { 0x00000079 } }, - { AR5K_RF_GAIN(36), { 0x000000b9 } }, - { AR5K_RF_GAIN(37), { 0x000000f9 } }, - { AR5K_RF_GAIN(38), { 0x000000f9 } }, - { AR5K_RF_GAIN(39), { 0x000000f9 } }, - { AR5K_RF_GAIN(40), { 0x000000f9 } }, - { AR5K_RF_GAIN(41), { 0x000000f9 } }, - { AR5K_RF_GAIN(42), { 0x000000f9 } }, - { AR5K_RF_GAIN(43), { 0x000000f9 } }, - { AR5K_RF_GAIN(44), { 0x000000f9 } }, - { AR5K_RF_GAIN(45), { 0x000000f9 } }, - { AR5K_RF_GAIN(46), { 0x000000f9 } }, - { AR5K_RF_GAIN(47), { 0x000000f9 } }, - { AR5K_RF_GAIN(48), { 0x000000f9 } }, - { AR5K_RF_GAIN(49), { 0x000000f9 } }, - { AR5K_RF_GAIN(50), { 0x000000f9 } }, - { AR5K_RF_GAIN(51), { 0x000000f9 } }, - { AR5K_RF_GAIN(52), { 0x000000f9 } }, - { AR5K_RF_GAIN(53), { 0x000000f9 } }, - { AR5K_RF_GAIN(54), { 0x000000f9 } }, - { AR5K_RF_GAIN(55), { 0x000000f9 } }, - { AR5K_RF_GAIN(56), { 0x000000f9 } }, - { AR5K_RF_GAIN(57), { 0x000000f9 } }, - { AR5K_RF_GAIN(58), { 0x000000f9 } }, - { AR5K_RF_GAIN(59), { 0x000000f9 } }, - { AR5K_RF_GAIN(60), { 0x000000f9 } }, - { AR5K_RF_GAIN(61), { 0x000000f9 } }, - { AR5K_RF_GAIN(62), { 0x000000f9 } }, - { AR5K_RF_GAIN(63), { 0x000000f9 } }, -}; - -static const struct ath5k_gain_opt rfgain_opt_5112 = { - 1, - 8, - { - { { 3, 0, 0, 0, 0, 0, 0 }, 6 }, - { { 2, 0, 0, 0, 0, 0, 0 }, 0 }, - { { 1, 0, 0, 0, 0, 0, 0 }, -3 }, - { { 0, 0, 0, 0, 0, 0, 0 }, -6 }, - { { 0, 1, 1, 0, 0, 0, 0 }, -8 }, - { { 0, 1, 1, 0, 1, 1, 0 }, -10 }, - { { 0, 1, 0, 1, 1, 1, 0 }, -13 }, - { { 0, 1, 0, 1, 1, 0, 1 }, -16 }, - } -}; +#include "rfbuffer.h" +#include "rfgain.h" /* * Used to modify RF Banks before writing them to AR5K_RF_BUFFER */ -static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits, - u32 first, u32 col, bool set) +static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah, + const struct ath5k_rf_reg *rf_regs, + u32 val, u8 reg_id, bool set) { - u32 mask, entry, last, data, shift, position; - s32 left; + const struct ath5k_rf_reg *rfreg = NULL; + u8 offset, bank, num_bits, col, position; + u16 entry; + u32 mask, data, last_bit, bits_shifted, first_bit; + u32 *rfb; + s32 bits_left; int i; data = 0; + rfb = ah->ah_rf_banks; - if (rf == NULL) + for (i = 0; i < ah->ah_rf_regs_count; i++) { + if (rf_regs[i].index == reg_id) { + rfreg = &rf_regs[i]; + break; + } + } + + if (rfb == NULL || rfreg == NULL) { + ATH5K_PRINTF("Rf register not found!\n"); /* should not happen */ return 0; + } - if (!(col <= 3 && bits <= 32 && first + bits <= 319)) { + bank = rfreg->bank; + num_bits = rfreg->field.len; + first_bit = rfreg->field.pos; + col = rfreg->field.col; + + /* first_bit is an offset from bank's + * start. Since we have all banks on + * the same array, we use this offset + * to mark each bank's start */ + offset = ah->ah_offset[bank]; + + /* Boundary check */ + if (!(col <= 3 && num_bits <= 32 && first_bit + num_bits <= 319)) { ATH5K_PRINTF("invalid values at offset %u\n", offset); return 0; } - entry = ((first - 1) / 8) + offset; - position = (first - 1) % 8; + entry = ((first_bit - 1) / 8) + offset; + position = (first_bit - 1) % 8; if (set) - data = ath5k_hw_bitswap(reg, bits); + data = ath5k_hw_bitswap(val, num_bits); + + for (bits_shifted = 0, bits_left = num_bits; bits_left > 0; + position = 0, entry++) { + + last_bit = (position + bits_left > 8) ? 8 : + position + bits_left; - for (i = shift = 0, left = bits; left > 0; position = 0, entry++, i++) { - last = (position + left > 8) ? 8 : position + left; - mask = (((1 << last) - 1) ^ ((1 << position) - 1)) << (col * 8); + mask = (((1 << last_bit) - 1) ^ ((1 << position) - 1)) << + (col * 8); if (set) { - rf[entry] &= ~mask; - rf[entry] |= ((data << position) << (col * 8)) & mask; + rfb[entry] &= ~mask; + rfb[entry] |= ((data << position) << (col * 8)) & mask; data >>= (8 - position); } else { - data = (((rf[entry] & mask) >> (col * 8)) >> position) - << shift; - shift += last - position; + data |= (((rfb[entry] & mask) >> (col * 8)) >> position) + << bits_shifted; + bits_shifted += last_bit - position; } - left -= 8 - position; + bits_left -= 8 - position; } - data = set ? 1 : ath5k_hw_bitswap(data, bits); + data = set ? 1 : ath5k_hw_bitswap(data, num_bits); return data; } -static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) +/**********************\ +* RF Gain optimization * +\**********************/ + +/* + * This code is used to optimize rf gain on different environments + * (temprature mostly) based on feedback from a power detector. + * + * It's only used on RF5111 and RF5112, later RF chips seem to have + * auto adjustment on hw -notice they have a much smaller BANK 7 and + * no gain optimization ladder-. + * + * For more infos check out this patent doc + * http://www.freepatentsonline.com/7400691.html + * + * This paper describes power drops as seen on the receiver due to + * probe packets + * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues + * %20of%20Power%20Control.pdf + * + * And this is the MadWiFi bug entry related to the above + * http://madwifi-project.org/ticket/1659 + * with various measurements and diagrams + * + * TODO: Deal with power drops due to probes by setting an apropriate + * tx power on the probe packets ! Make this part of the calibration process. + */ + +/* Initialize ah_gain durring attach */ +int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah) +{ + /* Initialize the gain optimization values */ + switch (ah->ah_radio) { + case AR5K_RF5111: + ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 35; + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + break; + case AR5K_RF5112: + ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default; + ah->ah_gain.g_low = 20; + ah->ah_gain.g_high = 85; + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* Schedule a gain probe check on the next transmited packet. + * That means our next packet is going to be sent with lower + * tx power and a Peak to Average Power Detector (PAPD) will try + * to measure the gain. + * + * TODO: Use propper tx power setting for the probe packet so + * that we don't observe a serious power drop on the receiver + * + * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc) + * just after we enable the probe so that we don't mess with + * standard traffic ? Maybe it's time to use sw interrupts and + * a probe tasklet !!! + */ +static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) +{ + + /* Skip if gain calibration is inactive or + * we already handle a probe request */ + if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE) + return; + + /* Send the packet with 2dB below max power as + * patent doc suggest */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4, + AR5K_PHY_PAPD_PROBE_TXPOWER) | + AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); + + ah->ah_gain.g_state = AR5K_RFGAIN_READ_REQUESTED; + +} + +/* Calculate gain_F measurement correction + * based on the current step for RF5112 rev. 2 */ +static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah) { u32 mix, step; u32 *rf; + const struct ath5k_gain_opt *go; + const struct ath5k_gain_opt_step *g_step; + const struct ath5k_rf_reg *rf_regs; + + /* Only RF5112 Rev. 2 supports it */ + if ((ah->ah_radio != AR5K_RF5112) || + (ah->ah_radio_5ghz_revision <= AR5K_SREV_RAD_5112A)) + return 0; + + go = &rfgain_opt_5112; + rf_regs = rf_regs_5112a; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a); + + g_step = &go->go_step[ah->ah_gain.g_step_idx]; if (ah->ah_rf_banks == NULL) return 0; @@ -1165,11 +221,15 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) rf = ah->ah_rf_banks; ah->ah_gain.g_f_corr = 0; - if (ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, false) != 1) + /* No VGA (Variable Gain Amplifier) override, skip */ + if (ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, false) != 1) return 0; - step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 4, 32, 0, false); - mix = ah->ah_gain.g_step->gos_param[0]; + /* Mix gain stepping */ + step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXGAIN_STEP, false); + + /* Mix gain override */ + mix = g_step->gos_param[0]; switch (mix) { case 3: @@ -1189,9 +249,14 @@ static u32 ath5k_hw_rfregs_gainf_corr(struct ath5k_hw *ah) return ah->ah_gain.g_f_corr; } -static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) +/* Check if current gain_F measurement is in the range of our + * power detector windows. If we get a measurement outside range + * we know it's not accurate (detectors can't measure anything outside + * their detection window) so we must ignore it */ +static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah) { - u32 step, mix, level[4]; + const struct ath5k_rf_reg *rf_regs; + u32 step, mix_ovr, level[4]; u32 *rf; if (ah->ah_rf_banks == NULL) @@ -1200,23 +265,33 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) rf = ah->ah_rf_banks; if (ah->ah_radio == AR5K_RF5111) { - step = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 6, 37, 0, - false); + + rf_regs = rf_regs_5111; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111); + + step = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_RFGAIN_STEP, + false); + level[0] = 0; - level[1] = (step == 0x3f) ? 0x32 : step + 4; - level[2] = (step != 0x3f) ? 0x40 : level[0]; - level[3] = level[2] + 0x32; + level[1] = (step == 63) ? 50 : step + 4; + level[2] = (step != 63) ? 64 : level[0]; + level[3] = level[2] + 50 ; ah->ah_gain.g_high = level[3] - - (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); + (step == 63 ? AR5K_GAIN_DYN_ADJUST_HI_MARGIN : -5); ah->ah_gain.g_low = level[0] + - (step == 0x3f ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0); + (step == 63 ? AR5K_GAIN_DYN_ADJUST_LO_MARGIN : 0); } else { - mix = ath5k_hw_rfregs_op(rf, ah->ah_offset[7], 0, 1, 36, 0, - false); + + rf_regs = rf_regs_5112; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112); + + mix_ovr = ath5k_hw_rfb_op(ah, rf_regs, 0, AR5K_RF_MIXVGA_OVR, + false); + level[0] = level[2] = 0; - if (mix == 1) { + if (mix_ovr == 1) { level[1] = level[3] = 83; } else { level[1] = level[3] = 107; @@ -1230,9 +305,12 @@ static bool ath5k_hw_rfregs_gain_readback(struct ath5k_hw *ah) ah->ah_gain.g_current <= level[3]); } -static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah) +/* Perform gain_F adjustment by choosing the right set + * of parameters from rf gain optimization ladder */ +static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah) { const struct ath5k_gain_opt *go; + const struct ath5k_gain_opt_step *g_step; int ret = 0; switch (ah->ah_radio) { @@ -1246,35 +324,39 @@ static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah) return 0; } - ah->ah_gain.g_step = &go->go_step[ah->ah_gain.g_step_idx]; + g_step = &go->go_step[ah->ah_gain.g_step_idx]; if (ah->ah_gain.g_current >= ah->ah_gain.g_high) { + + /* Reached maximum */ if (ah->ah_gain.g_step_idx == 0) return -1; + for (ah->ah_gain.g_target = ah->ah_gain.g_current; ah->ah_gain.g_target >= ah->ah_gain.g_high && ah->ah_gain.g_step_idx > 0; - ah->ah_gain.g_step = - &go->go_step[ah->ah_gain.g_step_idx]) + g_step = &go->go_step[ah->ah_gain.g_step_idx]) ah->ah_gain.g_target -= 2 * (go->go_step[--(ah->ah_gain.g_step_idx)].gos_gain - - ah->ah_gain.g_step->gos_gain); + g_step->gos_gain); ret = 1; goto done; } if (ah->ah_gain.g_current <= ah->ah_gain.g_low) { + + /* Reached minimum */ if (ah->ah_gain.g_step_idx == (go->go_steps_count - 1)) return -2; + for (ah->ah_gain.g_target = ah->ah_gain.g_current; ah->ah_gain.g_target <= ah->ah_gain.g_low && ah->ah_gain.g_step_idx < go->go_steps_count-1; - ah->ah_gain.g_step = - &go->go_step[ah->ah_gain.g_step_idx]) + g_step = &go->go_step[ah->ah_gain.g_step_idx]) ah->ah_gain.g_target -= 2 * (go->go_step[++ah->ah_gain.g_step_idx].gos_gain - - ah->ah_gain.g_step->gos_gain); + g_step->gos_gain); ret = 2; goto done; @@ -1289,468 +371,449 @@ done: return ret; } -/* - * Read EEPROM Calibration data, modify RF Banks and Initialize RF5111 - */ -static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) +/* Main callback for thermal rf gain calibration engine + * Check for a new gain reading and schedule an adjustment + * if needed. + * + * TODO: Use sw interrupt to schedule reset if gain_F needs + * adjustment */ +enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah) { + u32 data, type; struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 *rf; - const unsigned int rf_size = ARRAY_SIZE(rfregs_5111); - unsigned int i; - int obdb = -1, bank = -1; - u32 ee_mode; - - AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); - - rf = ah->ah_rf_banks; - - /* Copy values to modify them */ - for (i = 0; i < rf_size; i++) { - if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) { - ATH5K_ERR(ah->ah_sc, "invalid bank\n"); - return -EINVAL; - } - if (bank != rfregs_5111[i].rf_bank) { - bank = rfregs_5111[i].rf_bank; - ah->ah_offset[bank] = i; - } + ATH5K_TRACE(ah->ah_sc); - rf[i] = rfregs_5111[i].rf_value[mode]; - } + if (ah->ah_rf_banks == NULL || + ah->ah_gain.g_state == AR5K_RFGAIN_INACTIVE) + return AR5K_RFGAIN_INACTIVE; - /* Modify bank 0 */ - if (channel->hw_value & CHANNEL_2GHZ) { - if (channel->hw_value & CHANNEL_CCK) - ee_mode = AR5K_EEPROM_MODE_11B; - else - ee_mode = AR5K_EEPROM_MODE_11G; - obdb = 0; + /* No check requested, either engine is inactive + * or an adjustment is already requested */ + if (ah->ah_gain.g_state != AR5K_RFGAIN_READ_REQUESTED) + goto done; - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0], - ee->ee_ob[ee_mode][obdb], 3, 119, 0, true)) - return -EINVAL; + /* Read the PAPD (Peak to Average Power Detector) + * register */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE); - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[0], - ee->ee_ob[ee_mode][obdb], 3, 122, 0, true)) - return -EINVAL; + /* No probe is scheduled, read gain_F measurement */ + if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) { + ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S; + type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE); - obdb = 1; - /* Modify bank 6 */ - } else { - /* For 11a, Turbo and XR */ - ee_mode = AR5K_EEPROM_MODE_11A; - obdb = channel->center_freq >= 5725 ? 3 : - (channel->center_freq >= 5500 ? 2 : - (channel->center_freq >= 5260 ? 1 : - (channel->center_freq > 4000 ? 0 : -1))); + /* If tx packet is CCK correct the gain_F measurement + * by cck ofdm gain delta */ + if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) { + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) + ah->ah_gain.g_current += + ee->ee_cck_ofdm_gain_delta; + else + ah->ah_gain.g_current += + AR5K_GAIN_CCK_PROBE_CORR; + } - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_pwd_84, 1, 51, 3, true)) - return -EINVAL; + /* Further correct gain_F measurement for + * RF5112A radios */ + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + ath5k_hw_rf_gainf_corr(ah); + ah->ah_gain.g_current = + ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? + (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : + 0; + } - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_pwd_90, 1, 45, 3, true)) - return -EINVAL; + /* Check if measurement is ok and if we need + * to adjust gain, schedule a gain adjustment, + * else switch back to the acive state */ + if (ath5k_hw_rf_check_gainf_readback(ah) && + AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && + ath5k_hw_rf_gainf_adjust(ah)) { + ah->ah_gain.g_state = AR5K_RFGAIN_NEED_CHANGE; + } else { + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; + } } - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - !ee->ee_xpd[ee_mode], 1, 95, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_x_gain[ee_mode], 4, 96, 0, true)) - return -EINVAL; - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ? - ee->ee_ob[ee_mode][obdb] : 0, 3, 104, 0, true)) - return -EINVAL; +done: + return ah->ah_gain.g_state; +} - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], obdb >= 0 ? - ee->ee_db[ee_mode][obdb] : 0, 3, 107, 0, true)) - return -EINVAL; +/* Write initial rf gain table to set the RF sensitivity + * this one works on all RF chips and has nothing to do + * with gain_F calibration */ +int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq) +{ + const struct ath5k_ini_rfgain *ath5k_rfg; + unsigned int i, size; - /* Modify bank 7 */ - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], - ee->ee_i_gain[ee_mode], 6, 29, 0, true)) + switch (ah->ah_radio) { + case AR5K_RF5111: + ath5k_rfg = rfgain_5111; + size = ARRAY_SIZE(rfgain_5111); + break; + case AR5K_RF5112: + ath5k_rfg = rfgain_5112; + size = ARRAY_SIZE(rfgain_5112); + break; + case AR5K_RF2413: + ath5k_rfg = rfgain_2413; + size = ARRAY_SIZE(rfgain_2413); + break; + case AR5K_RF2316: + ath5k_rfg = rfgain_2316; + size = ARRAY_SIZE(rfgain_2316); + break; + case AR5K_RF5413: + ath5k_rfg = rfgain_5413; + size = ARRAY_SIZE(rfgain_5413); + break; + case AR5K_RF2317: + case AR5K_RF2425: + ath5k_rfg = rfgain_2425; + size = ARRAY_SIZE(rfgain_2425); + break; + default: return -EINVAL; + } - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], - ee->ee_xpd[ee_mode], 1, 4, 0, true)) + switch (freq) { + case AR5K_INI_RFGAIN_2GHZ: + case AR5K_INI_RFGAIN_5GHZ: + break; + default: return -EINVAL; + } - /* Write RF values */ - for (i = 0; i < rf_size; i++) { + for (i = 0; i < size; i++) { AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, rf[i], rfregs_5111[i].rf_register); + ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], + (u32)ath5k_rfg[i].rfg_register); } return 0; } + + +/********************\ +* RF Registers setup * +\********************/ + + /* - * Read EEPROM Calibration data, modify RF Banks and Initialize RF5112 + * Setup RF registers by writing rf buffer on hw */ -static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) +int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, + unsigned int mode) { - const struct ath5k_ini_rf *rf_ini; + const struct ath5k_rf_reg *rf_regs; + const struct ath5k_ini_rfbuffer *ini_rfb; + const struct ath5k_gain_opt *go = NULL; + const struct ath5k_gain_opt_step *g_step; struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - u32 *rf; - unsigned int rf_size, i; - int obdb = -1, bank = -1; - u32 ee_mode; - - AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); + u8 ee_mode = 0; + u32 *rfb; + int i, obdb = -1, bank = -1; - rf = ah->ah_rf_banks; + switch (ah->ah_radio) { + case AR5K_RF5111: + rf_regs = rf_regs_5111; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5111); + ini_rfb = rfb_5111; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5111); + go = &rfgain_opt_5111; + break; + case AR5K_RF5112: + if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { + rf_regs = rf_regs_5112a; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112a); + ini_rfb = rfb_5112a; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112a); + } else { + rf_regs = rf_regs_5112; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5112); + ini_rfb = rfb_5112; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5112); + } + go = &rfgain_opt_5112; + break; + case AR5K_RF2413: + rf_regs = rf_regs_2413; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2413); + ini_rfb = rfb_2413; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2413); + break; + case AR5K_RF2316: + rf_regs = rf_regs_2316; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2316); + ini_rfb = rfb_2316; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2316); + break; + case AR5K_RF5413: + rf_regs = rf_regs_5413; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_5413); + ini_rfb = rfb_5413; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_5413); + break; + case AR5K_RF2317: + rf_regs = rf_regs_2425; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425); + ini_rfb = rfb_2317; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2317); + break; + case AR5K_RF2425: + rf_regs = rf_regs_2425; + ah->ah_rf_regs_count = ARRAY_SIZE(rf_regs_2425); + if (ah->ah_mac_srev < AR5K_SREV_AR2417) { + ini_rfb = rfb_2425; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2425); + } else { + ini_rfb = rfb_2417; + ah->ah_rf_banks_size = ARRAY_SIZE(rfb_2417); + } + break; + default: + return -EINVAL; + } - if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A - && !test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) { - rf_ini = rfregs_2112a; - rf_size = ARRAY_SIZE(rfregs_5112a); - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, "invalid channel mode: %i\n", - mode); - return -EINVAL; + /* If it's the first time we set rf buffer, allocate + * ah->ah_rf_banks based on ah->ah_rf_banks_size + * we set above */ + if (ah->ah_rf_banks == NULL) { + ah->ah_rf_banks = kmalloc(sizeof(u32) * ah->ah_rf_banks_size, + GFP_KERNEL); + if (ah->ah_rf_banks == NULL) { + ATH5K_ERR(ah->ah_sc, "out of memory\n"); + return -ENOMEM; } - mode = mode - 2; /*no a/turboa modes for 2112*/ - } else if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) { - rf_ini = rfregs_5112a; - rf_size = ARRAY_SIZE(rfregs_5112a); - } else { - rf_ini = rfregs_5112; - rf_size = ARRAY_SIZE(rfregs_5112); } /* Copy values to modify them */ - for (i = 0; i < rf_size; i++) { - if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) { + rfb = ah->ah_rf_banks; + + for (i = 0; i < ah->ah_rf_banks_size; i++) { + if (ini_rfb[i].rfb_bank >= AR5K_MAX_RF_BANKS) { ATH5K_ERR(ah->ah_sc, "invalid bank\n"); return -EINVAL; } - if (bank != rf_ini[i].rf_bank) { - bank = rf_ini[i].rf_bank; + /* Bank changed, write down the offset */ + if (bank != ini_rfb[i].rfb_bank) { + bank = ini_rfb[i].rfb_bank; ah->ah_offset[bank] = i; } - rf[i] = rf_ini[i].rf_value[mode]; + rfb[i] = ini_rfb[i].rfb_mode_data[mode]; } - /* Modify bank 6 */ + /* Set Output and Driver bias current (OB/DB) */ if (channel->hw_value & CHANNEL_2GHZ) { - if (channel->hw_value & CHANNEL_OFDM) + + if (channel->hw_value & CHANNEL_CCK) + ee_mode = AR5K_EEPROM_MODE_11B; + else ee_mode = AR5K_EEPROM_MODE_11G; + + /* For RF511X/RF211X combination we + * use b_OB and b_DB parameters stored + * in eeprom on ee->ee_ob[ee_mode][0] + * + * For all other chips we use OB/DB for 2Ghz + * stored in the b/g modal section just like + * 802.11a on ee->ee_ob[ee_mode][1] */ + if ((ah->ah_radio == AR5K_RF5111) || + (ah->ah_radio == AR5K_RF5112)) + obdb = 0; else - ee_mode = AR5K_EEPROM_MODE_11B; - obdb = 0; + obdb = 1; - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 287, 0, true)) - return -EINVAL; + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb], + AR5K_RF_OB_2GHZ, true); - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 290, 0, true)) - return -EINVAL; - } else { - /* For 11a, Turbo and XR */ + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb], + AR5K_RF_DB_2GHZ, true); + + /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */ + } else if ((channel->hw_value & CHANNEL_5GHZ) || + (ah->ah_radio == AR5K_RF5111)) { + + /* For 11a, Turbo and XR we need to choose + * OB/DB based on frequency range */ ee_mode = AR5K_EEPROM_MODE_11A; - obdb = channel->center_freq >= 5725 ? 3 : - (channel->center_freq >= 5500 ? 2 : + obdb = channel->center_freq >= 5725 ? 3 : + (channel->center_freq >= 5500 ? 2 : (channel->center_freq >= 5260 ? 1 : - (channel->center_freq > 4000 ? 0 : -1))); + (channel->center_freq > 4000 ? 0 : -1))); - if (obdb == -1) + if (obdb < 0) return -EINVAL; - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 279, 0, true)) - return -EINVAL; + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_ob[ee_mode][obdb], + AR5K_RF_OB_5GHZ, true); - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_ob[ee_mode][obdb], 3, 282, 0, true)) - return -EINVAL; + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_db[ee_mode][obdb], + AR5K_RF_DB_5GHZ, true); } - ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_x_gain[ee_mode], 2, 270, 0, true); - ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_x_gain[ee_mode], 2, 257, 0, true); - - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[6], - ee->ee_xpd[ee_mode], 1, 302, 0, true)) - return -EINVAL; + g_step = &go->go_step[ah->ah_gain.g_step_idx]; - /* Modify bank 7 */ - if (!ath5k_hw_rfregs_op(rf, ah->ah_offset[7], - ee->ee_i_gain[ee_mode], 6, 14, 0, true)) - return -EINVAL; + /* Bank Modifications (chip-specific) */ + if (ah->ah_radio == AR5K_RF5111) { - /* Write RF values */ - for (i = 0; i < rf_size; i++) - ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register); + /* Set gain_F settings according to current step */ + if (channel->hw_value & CHANNEL_OFDM) { - return 0; -} + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL, + AR5K_PHY_FRAME_CTL_TX_CLIP, + g_step->gos_param[0]); -/* - * Initialize RF5413/5414 and future chips - * (until we come up with a better solution) - */ -static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah, - struct ieee80211_channel *channel, unsigned int mode) -{ - const struct ath5k_ini_rf *rf_ini; - u32 *rf; - unsigned int rf_size, i; - int bank = -1; + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1], + AR5K_RF_PWD_90, true); - AR5K_ASSERT_ENTRY(mode, AR5K_MODE_MAX); + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2], + AR5K_RF_PWD_84, true); - rf = ah->ah_rf_banks; + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3], + AR5K_RF_RFGAIN_SEL, true); - switch (ah->ah_radio) { - case AR5K_RF5413: - rf_ini = rfregs_5413; - rf_size = ARRAY_SIZE(rfregs_5413); - break; - case AR5K_RF2413: - rf_ini = rfregs_2413; - rf_size = ARRAY_SIZE(rfregs_2413); + /* We programmed gain_F parameters, switch back + * to active state */ + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, - "invalid channel mode: %i\n", mode); - return -EINVAL; } - mode = mode - 2; - break; - case AR5K_RF2425: - rf_ini = rfregs_2425; - rf_size = ARRAY_SIZE(rfregs_2425); + /* Bank 6/7 setup */ - if (mode < 2) { - ATH5K_ERR(ah->ah_sc, - "invalid channel mode: %i\n", mode); - return -EINVAL; - } + ath5k_hw_rfb_op(ah, rf_regs, !ee->ee_xpd[ee_mode], + AR5K_RF_PWD_XPD, true); - /* Map b to g */ - if (mode == 2) - mode = 0; - else - mode = mode - 3; + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_x_gain[ee_mode], + AR5K_RF_XPD_GAIN, true); - break; - default: - return -EINVAL; + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], + AR5K_RF_GAIN_I, true); + + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], + AR5K_RF_PLO_SEL, true); + + /* TODO: Half/quarter channel support */ } - /* Copy values to modify them */ - for (i = 0; i < rf_size; i++) { - if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) { - ATH5K_ERR(ah->ah_sc, "invalid bank\n"); - return -EINVAL; - } + if (ah->ah_radio == AR5K_RF5112) { - if (bank != rf_ini[i].rf_bank) { - bank = rf_ini[i].rf_bank; - ah->ah_offset[bank] = i; - } + /* Set gain_F settings according to current step */ + if (channel->hw_value & CHANNEL_OFDM) { - rf[i] = rf_ini[i].rf_value[mode]; - } + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[0], + AR5K_RF_MIXGAIN_OVR, true); - /* - * After compairing dumps from different cards - * we get the same RF_BUFFER settings (diff returns - * 0 lines). It seems that RF_BUFFER settings are static - * and are written unmodified (no EEPROM stuff - * is used because calibration data would be - * different between different cards and would result - * different RF_BUFFER settings) - */ + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[1], + AR5K_RF_PWD_138, true); - /* Write RF values */ - for (i = 0; i < rf_size; i++) - ath5k_hw_reg_write(ah, rf[i], rf_ini[i].rf_register); + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[2], + AR5K_RF_PWD_137, true); - return 0; -} + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[3], + AR5K_RF_PWD_136, true); -/* - * Initialize RF - */ -int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int mode) -{ - int (*func)(struct ath5k_hw *, struct ieee80211_channel *, unsigned int); - int ret; + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[4], + AR5K_RF_PWD_132, true); - switch (ah->ah_radio) { - case AR5K_RF5111: - ah->ah_rf_banks_size = sizeof(rfregs_5111); - func = ath5k_hw_rf5111_rfregs; - break; - case AR5K_RF5112: - if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_5112A) - ah->ah_rf_banks_size = sizeof(rfregs_5112a); - else - ah->ah_rf_banks_size = sizeof(rfregs_5112); - func = ath5k_hw_rf5112_rfregs; - break; - case AR5K_RF5413: - ah->ah_rf_banks_size = sizeof(rfregs_5413); - func = ath5k_hw_rf5413_rfregs; - break; - case AR5K_RF2413: - ah->ah_rf_banks_size = sizeof(rfregs_2413); - func = ath5k_hw_rf5413_rfregs; - break; - case AR5K_RF2425: - ah->ah_rf_banks_size = sizeof(rfregs_2425); - func = ath5k_hw_rf5413_rfregs; - break; - default: - return -EINVAL; - } + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[5], + AR5K_RF_PWD_131, true); - if (ah->ah_rf_banks == NULL) { - /* XXX do extra checks? */ - ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL); - if (ah->ah_rf_banks == NULL) { - ATH5K_ERR(ah->ah_sc, "out of memory\n"); - return -ENOMEM; + ath5k_hw_rfb_op(ah, rf_regs, g_step->gos_param[6], + AR5K_RF_PWD_130, true); + + /* We programmed gain_F parameters, switch back + * to active state */ + ah->ah_gain.g_state = AR5K_RFGAIN_ACTIVE; } - } - ret = func(ah, channel, mode); - if (!ret) - ah->ah_rf_gain = AR5K_RFGAIN_INACTIVE; + /* Bank 6/7 setup */ - return ret; -} + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode], + AR5K_RF_XPD_SEL, true); -int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq) -{ - const struct ath5k_ini_rfgain *ath5k_rfg; - unsigned int i, size; + if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) { + /* Rev. 1 supports only one xpd */ + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_XPD_GAIN, true); - switch (ah->ah_radio) { - case AR5K_RF5111: - ath5k_rfg = rfgain_5111; - size = ARRAY_SIZE(rfgain_5111); - break; - case AR5K_RF5112: - ath5k_rfg = rfgain_5112; - size = ARRAY_SIZE(rfgain_5112); - break; - case AR5K_RF5413: - ath5k_rfg = rfgain_5413; - size = ARRAY_SIZE(rfgain_5413); - break; - case AR5K_RF2413: - ath5k_rfg = rfgain_2413; - size = ARRAY_SIZE(rfgain_2413); - freq = 0; /* only 2Ghz */ - break; - case AR5K_RF2425: - ath5k_rfg = rfgain_2425; - size = ARRAY_SIZE(rfgain_2425); - freq = 0; /* only 2Ghz */ - break; - default: - return -EINVAL; - } + } else { + /* TODO: Set high and low gain bits */ + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_PD_GAIN_LO, true); + ath5k_hw_rfb_op(ah, rf_regs, + ee->ee_x_gain[ee_mode], + AR5K_RF_PD_GAIN_HI, true); - switch (freq) { - case AR5K_INI_RFGAIN_2GHZ: - case AR5K_INI_RFGAIN_5GHZ: - break; - default: - return -EINVAL; - } + /* Lower synth voltage on Rev 2 */ + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_HIGH_VC_CP, true); - for (i = 0; i < size; i++) { - AR5K_REG_WAIT(i); - ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq], - (u32)ath5k_rfg[i].rfg_register); - } + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_MID_VC_CP, true); - return 0; -} + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_LOW_VC_CP, true); -enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah) -{ - u32 data, type; + ath5k_hw_rfb_op(ah, rf_regs, 2, + AR5K_RF_PUSH_UP, true); - ATH5K_TRACE(ah->ah_sc); + /* Decrease power consumption on 5213+ BaseBand */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PAD2GND, true); - if (ah->ah_rf_banks == NULL || !ah->ah_gain.g_active || - ah->ah_version <= AR5K_AR5211) - return AR5K_RFGAIN_INACTIVE; + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_XB2_LVL, true); - if (ah->ah_rf_gain != AR5K_RFGAIN_READ_REQUESTED) - goto done; + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_XB5_LVL, true); - data = ath5k_hw_reg_read(ah, AR5K_PHY_PAPD_PROBE); + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PWD_167, true); - if (!(data & AR5K_PHY_PAPD_PROBE_TX_NEXT)) { - ah->ah_gain.g_current = data >> AR5K_PHY_PAPD_PROBE_GAINF_S; - type = AR5K_REG_MS(data, AR5K_PHY_PAPD_PROBE_TYPE); + ath5k_hw_rfb_op(ah, rf_regs, 1, + AR5K_RF_PWD_166, true); + } + } - if (type == AR5K_PHY_PAPD_PROBE_TYPE_CCK) - ah->ah_gain.g_current += AR5K_GAIN_CCK_PROBE_CORR; + ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode], + AR5K_RF_GAIN_I, true); - if (ah->ah_radio >= AR5K_RF5112) { - ath5k_hw_rfregs_gainf_corr(ah); - ah->ah_gain.g_current = - ah->ah_gain.g_current >= ah->ah_gain.g_f_corr ? - (ah->ah_gain.g_current-ah->ah_gain.g_f_corr) : - 0; - } + /* TODO: Half/quarter channel support */ - if (ath5k_hw_rfregs_gain_readback(ah) && - AR5K_GAIN_CHECK_ADJUST(&ah->ah_gain) && - ath5k_hw_rfregs_gain_adjust(ah)) - ah->ah_rf_gain = AR5K_RFGAIN_NEED_CHANGE; } -done: - return ah->ah_rf_gain; -} + if (ah->ah_radio == AR5K_RF5413 && + channel->hw_value & CHANNEL_2GHZ) { -int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah) -{ - /* Initialize the gain optimization values */ - switch (ah->ah_radio) { - case AR5K_RF5111: - ah->ah_gain.g_step_idx = rfgain_opt_5111.go_default; - ah->ah_gain.g_step = - &rfgain_opt_5111.go_step[ah->ah_gain.g_step_idx]; - ah->ah_gain.g_low = 20; - ah->ah_gain.g_high = 35; - ah->ah_gain.g_active = 1; - break; - case AR5K_RF5112: - ah->ah_gain.g_step_idx = rfgain_opt_5112.go_default; - ah->ah_gain.g_step = - &rfgain_opt_5112.go_step[ah->ah_gain.g_step_idx]; - ah->ah_gain.g_low = 20; - ah->ah_gain.g_high = 85; - ah->ah_gain.g_active = 1; - break; - default: - return -EINVAL; + ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE, + true); + + /* Set optimum value for early revisions (on pci-e chips) */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424 && + ah->ah_mac_srev < AR5K_SREV_AR5413) + ath5k_hw_rfb_op(ah, rf_regs, ath5k_hw_bitswap(6, 3), + AR5K_RF_PWD_ICLOBUF_2G, true); + + } + + /* Write RF banks on hw */ + for (i = 0; i < ah->ah_rf_banks_size; i++) { + AR5K_REG_WAIT(i); + ath5k_hw_reg_write(ah, rfb[i], ini_rfb[i].rfb_ctrl_register); } return 0; } + /**************************\ PHY/RF channel functions \**************************/ @@ -2271,13 +1334,8 @@ done: * as often as I/Q calibration.*/ ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - /* Request RF gain */ - if (channel->hw_value & CHANNEL_5GHZ) { - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max, - AR5K_PHY_PAPD_PROBE_TXPOWER) | - AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); - ah->ah_rf_gain = AR5K_RFGAIN_READ_REQUESTED; - } + /* Initiate a gain_F calibration */ + ath5k_hw_request_rfgain_probe(ah); return 0; } @@ -2378,93 +1436,1120 @@ unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah) return false; /*XXX: What do we return for 5210 ?*/ } + +/****************\ +* TX power setup * +\****************/ + +/* + * Helper functions + */ + +/* + * Do linear interpolation between two given (x, y) points + */ +static s16 +ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, + s16 y_left, s16 y_right) +{ + s16 ratio, result; + + /* Avoid divide by zero and skip interpolation + * if we have the same point */ + if ((x_left == x_right) || (y_left == y_right)) + return y_left; + + /* + * Since we use ints and not fps, we need to scale up in + * order to get a sane ratio value (or else we 'll eg. get + * always 1 instead of 1.25, 1.75 etc). We scale up by 100 + * to have some accuracy both for 0.5 and 0.25 steps. + */ + ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left)); + + /* Now scale down to be in range */ + result = y_left + (ratio * (target - x_left) / 100); + + return result; +} + +/* + * Find vertical boundary (min pwr) for the linear PCDAC curve. + * + * Since we have the top of the curve and we draw the line below + * until we reach 1 (1 pcdac step) we need to know which point + * (x value) that is so that we don't go below y axis and have negative + * pcdac values when creating the curve, or fill the table with zeroes. + */ +static s16 +ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, + const s16 *pwrL, const s16 *pwrR) +{ + s8 tmp; + s16 min_pwrL, min_pwrR; + s16 pwr_i = pwrL[0]; + + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + + } while (tmp > 1); + + min_pwrL = pwr_i; + + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + + } while (tmp > 1); + + min_pwrR = pwr_i; + + /* Keep the right boundary so that it works for both curves */ + return max(min_pwrL, min_pwrR); +} + +/* + * Interpolate (pwr,vpd) points to create a Power to PDADC or a + * Power to PCDAC curve. + * + * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC + * steps (offsets) on y axis. Power can go up to 31.5dB and max + * PCDAC/PDADC step for each curve is 64 but we can write more than + * one curves on hw so we can go up to 128 (which is the max step we + * can write on the final table). + * + * We write y values (PCDAC/PDADC steps) on hw. + */ +static void +ath5k_create_power_curve(s16 pmin, s16 pmax, + const s16 *pwr, const u8 *vpd, + u8 num_points, + u8 *vpd_table, u8 type) +{ + u8 idx[2] = { 0, 1 }; + s16 pwr_i = 2*pmin; + int i; + + if (num_points < 2) + return; + + /* We want the whole line, so adjust boundaries + * to cover the entire power range. Note that + * power values are already 0.25dB so no need + * to multiply pwr_i by 2 */ + if (type == AR5K_PWRTABLE_LINEAR_PCDAC) { + pwr_i = pmin; + pmin = 0; + pmax = 63; + } + + /* Find surrounding turning points (TPs) + * and interpolate between them */ + for (i = 0; (i <= (u16) (pmax - pmin)) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + + /* We passed the right TP, move to the next set of TPs + * if we pass the last TP, extrapolate above using the last + * two TPs for ratio */ + if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) { + idx[0]++; + idx[1]++; + } + + vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i, + pwr[idx[0]], pwr[idx[1]], + vpd[idx[0]], vpd[idx[1]]); + + /* Increase by 0.5dB + * (0.25 dB units) */ + pwr_i += 2; + } +} + +/* + * Get the surrounding per-channel power calibration piers + * for a given frequency so that we can interpolate between + * them and come up with an apropriate dataset for our current + * channel. + */ +static void +ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + struct ath5k_chan_pcal_info **pcinfo_l, + struct ath5k_chan_pcal_info **pcinfo_r) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + if (!(channel->hw_value & CHANNEL_OFDM)) { + pcinfo = ee->ee_pwr_cal_b; + mode = AR5K_EEPROM_MODE_11B; + } else if (channel->hw_value & CHANNEL_2GHZ) { + pcinfo = ee->ee_pwr_cal_g; + mode = AR5K_EEPROM_MODE_11G; + } else { + pcinfo = ee->ee_pwr_cal_a; + mode = AR5K_EEPROM_MODE_11A; + } + max = ee->ee_n_piers[mode] - 1; + + /* Frequency is below our calibrated + * range. Use the lowest power curve + * we have */ + if (target < pcinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + /* Frequency is above our calibrated + * range. Use the highest power curve + * we have */ + if (target > pcinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + /* Frequency is inside our calibrated + * channel range. Pick the surrounding + * calibration piers so that we can + * interpolate */ + for (i = 0; i <= max; i++) { + + /* Frequency matches one of our calibration + * piers, no need to interpolate, just use + * that calibration pier */ + if (pcinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + /* We found a calibration pier that's above + * frequency, use this pier and the previous + * one to interpolate */ + if (target < pcinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + *pcinfo_l = &pcinfo[idx_l]; + *pcinfo_r = &pcinfo[idx_r]; + + return; +} + +/* + * Get the surrounding per-rate power calibration data + * for a given frequency and interpolate between power + * values to set max target power supported by hw for + * each rate. + */ +static void +ath5k_get_rate_pcal_data(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + struct ath5k_rate_pcal_info *rates) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rpinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + if (!(channel->hw_value & CHANNEL_OFDM)) { + rpinfo = ee->ee_rate_tpwr_b; + mode = AR5K_EEPROM_MODE_11B; + } else if (channel->hw_value & CHANNEL_2GHZ) { + rpinfo = ee->ee_rate_tpwr_g; + mode = AR5K_EEPROM_MODE_11G; + } else { + rpinfo = ee->ee_rate_tpwr_a; + mode = AR5K_EEPROM_MODE_11A; + } + max = ee->ee_rate_target_pwr_num[mode] - 1; + + /* Get the surrounding calibration + * piers - same as above */ + if (target < rpinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + if (target > rpinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + for (i = 0; i <= max; i++) { + + if (rpinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + if (target < rpinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + /* Now interpolate power value, based on the frequency */ + rates->freq = target; + + rates->target_power_6to24 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_6to24, + rpinfo[idx_r].target_power_6to24); + + rates->target_power_36 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_36, + rpinfo[idx_r].target_power_36); + + rates->target_power_48 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_48, + rpinfo[idx_r].target_power_48); + + rates->target_power_54 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_54, + rpinfo[idx_r].target_power_54); +} + +/* + * Get the max edge power for this channel if + * we have such data from EEPROM's Conformance Test + * Limits (CTL), and limit max power if needed. + * + * FIXME: Only works for world regulatory domains + */ +static void +ath5k_get_max_ctl_power(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep = ee->ee_ctl_pwr; + u8 *ctl_val = ee->ee_ctl; + s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4; + s16 edge_pwr = 0; + u8 rep_idx; + u8 i, ctl_mode; + u8 ctl_idx = 0xFF; + u32 target = channel->center_freq; + + /* Find out a CTL for our mode that's not mapped + * on a specific reg domain. + * + * TODO: Map our current reg domain to one of the 3 available + * reg domain ids so that we can support more CTLs. */ + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_G: + ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_B: + ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_T: + ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_TG: + ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_XR: + /* Fall through */ + default: + return; + } + + for (i = 0; i < ee->ee_ctls; i++) { + if (ctl_val[i] == ctl_mode) { + ctl_idx = i; + break; + } + } + + /* If we have a CTL dataset available grab it and find the + * edge power for our frequency */ + if (ctl_idx == 0xFF) + return; + + /* Edge powers are sorted by frequency from lower + * to higher. Each CTL corresponds to 8 edge power + * measurements. */ + rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES; + + /* Don't do boundaries check because we + * might have more that one bands defined + * for this mode */ + + /* Get the edge power that's closer to our + * frequency */ + for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) { + rep_idx += i; + if (target <= rep[rep_idx].freq) + edge_pwr = (s16) rep[rep_idx].edge; + } + + if (edge_pwr) + ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr); +} + + /* - * TX power setup + * Power to PCDAC table functions + */ + +/* + * Fill Power to PCDAC table on RF5111 + * + * No further processing is needed for RF5111, the only thing we have to + * do is fill the values below and above calibration range since eeprom data + * may not cover the entire PCDAC table. */ +static void +ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, + s16 *table_max) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_tmp = ah->ah_txpower.tmpL[0]; + u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i; + s16 min_pwr, max_pwr; + + /* Get table boundaries */ + min_pwr = table_min[0]; + pcdac_0 = pcdac_tmp[0]; + + max_pwr = table_max[0]; + pcdac_n = pcdac_tmp[table_max[0] - table_min[0]]; + + /* Extrapolate below minimum using pcdac_0 */ + pcdac_i = 0; + for (i = 0; i < min_pwr; i++) + pcdac_out[pcdac_i++] = pcdac_0; + + /* Copy values from pcdac_tmp */ + pwr_idx = min_pwr; + for (i = 0 ; pwr_idx <= max_pwr && + pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { + pcdac_out[pcdac_i++] = pcdac_tmp[i]; + pwr_idx++; + } + + /* Extrapolate above maximum */ + while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE) + pcdac_out[pcdac_i++] = pcdac_n; + +} /* - * Initialize the tx power table (not fully implemented) + * Combine available XPD Curves and fill Linear Power to PCDAC table + * on RF5112 + * + * RFX112 can have up to 2 curves (one for low txpower range and one for + * higher txpower range). We need to put them both on pcdac_out and place + * them in the correct location. In case we only have one curve available + * just fit it on pcdac_out (it's supposed to cover the entire range of + * available pwr levels since it's always the higher power curve). Extrapolate + * below and above final table if needed. */ -static void ath5k_txpower_table(struct ath5k_hw *ah, - struct ieee80211_channel *channel, s16 max_power) +static void +ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, + s16 *table_max, u8 pdcurves) { - unsigned int i, min, max, n; - u16 txpower, *rates; - - rates = ah->ah_txpower.txp_rates; - - txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2; - if (max_power > txpower) - txpower = max_power > AR5K_TUNE_MAX_TXPOWER ? - AR5K_TUNE_MAX_TXPOWER : max_power; - - for (i = 0; i < AR5K_MAX_RATES; i++) - rates[i] = txpower; - - /* XXX setup target powers by rate */ - - ah->ah_txpower.txp_min = rates[7]; - ah->ah_txpower.txp_max = rates[0]; - ah->ah_txpower.txp_ofdm = rates[0]; - - /* Calculate the power table */ - n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac); - min = AR5K_EEPROM_PCDAC_START; - max = AR5K_EEPROM_PCDAC_STOP; - for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP) - ah->ah_txpower.txp_pcdac[i] = -#ifdef notyet - min + ((i * (max - min)) / n); -#else - min; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_low_pwr; + u8 *pcdac_high_pwr; + u8 *pcdac_tmp; + u8 pwr; + s16 max_pwr_idx; + s16 min_pwr_idx; + s16 mid_pwr_idx = 0; + /* Edge flag turs on the 7nth bit on the PCDAC + * to delcare the higher power curve (force values + * to be greater than 64). If we only have one curve + * we don't need to set this, if we have 2 curves and + * fill the table backwards this can also be used to + * switch from higher power curve to lower power curve */ + u8 edge_flag; + int i; + + /* When we have only one curve available + * that's the higher power curve. If we have + * two curves the first is the high power curve + * and the next is the low power curve. */ + if (pdcurves > 1) { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + mid_pwr_idx = table_max[1] - table_min[1] - 1; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + + /* If table size goes beyond 31.5dB, keep the + * upper 31.5dB range when setting tx power. + * Note: 126 = 31.5 dB in quarter dB steps */ + if (table_max[0] - table_min[1] > 126) + min_pwr_idx = table_max[0] - 126; + else + min_pwr_idx = table_min[1]; + + /* Since we fill table backwards + * start from high power curve */ + pcdac_tmp = pcdac_high_pwr; + + edge_flag = 0x40; +#if 0 + /* If both min and max power limits are in lower + * power curve's range, only use the low power curve. + * TODO: min/max levels are related to target + * power values requested from driver/user + * XXX: Is this really needed ? */ + if (min_pwr < table_max[1] && + max_pwr < table_max[1]) { + edge_flag = 0; + pcdac_tmp = pcdac_low_pwr; + max_pwr_idx = (table_max[1] - table_min[1])/2; + } #endif + } else { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */ + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + min_pwr_idx = table_min[0]; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + pcdac_tmp = pcdac_high_pwr; + edge_flag = 0; + } + + /* This is used when setting tx power*/ + ah->ah_txpower.txp_min_idx = min_pwr_idx/2; + + /* Fill Power to PCDAC table backwards */ + pwr = max_pwr_idx; + for (i = 63; i >= 0; i--) { + /* Entering lower power range, reset + * edge flag and set pcdac_tmp to lower + * power curve.*/ + if (edge_flag == 0x40 && + (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { + edge_flag = 0x00; + pcdac_tmp = pcdac_low_pwr; + pwr = mid_pwr_idx/2; + } + + /* Don't go below 1, extrapolate below if we have + * already swithced to the lower power curve -or + * we only have one curve and edge_flag is zero + * anyway */ + if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { + while (i >= 0) { + pcdac_out[i] = pcdac_out[i + 1]; + i--; + } + break; + } + + pcdac_out[i] = pcdac_tmp[pwr] | edge_flag; + + /* Extrapolate above if pcdac is greater than + * 126 -this can happen because we OR pcdac_out + * value with edge_flag on high power curve */ + if (pcdac_out[i] > 126) + pcdac_out[i] = 126; + + /* Decrease by a 0.5dB step */ + pwr--; + } +} + +/* Write PCDAC values on hw */ +static void +ath5k_setup_pcdac_table(struct ath5k_hw *ah) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + int i; + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + ath5k_hw_reg_write(ah, + (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) | + (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16), + AR5K_PHY_PCDAC_TXPOWER(i)); + } } + /* - * Set transmition power + * Power to PDADC table functions */ -int /*O.K. - txpower_table is unimplemented so this doesn't work*/ -ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int txpower) + +/* + * Set the gain boundaries and create final Power to PDADC table + * + * We can have up to 4 pd curves, we need to do a simmilar process + * as we do for RF5112. This time we don't have an edge_flag but we + * set the gain boundaries on a separate register. + */ +static void +ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, + s16 *pwr_min, s16 *pwr_max, u8 pdcurves) { - bool tpc = ah->ah_txpower.txp_tpc; - unsigned int i; + u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS]; + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdadc_tmp; + s16 pdadc_0; + u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size; + u8 pd_gain_overlap; + + /* Note: Register value is initialized on initvals + * there is no feedback from hw. + * XXX: What about pd_gain_overlap from EEPROM ? */ + pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) & + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP; + + /* Create final PDADC table */ + for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) { + pdadc_tmp = ah->ah_txpower.tmpL[pdg]; + + if (pdg == pdcurves - 1) + /* 2 dB boundary stretch for last + * (higher power) curve */ + gain_boundaries[pdg] = pwr_max[pdg] + 4; + else + /* Set gain boundary in the middle + * between this curve and the next one */ + gain_boundaries[pdg] = + (pwr_max[pdg] + pwr_min[pdg + 1]) / 2; + + /* Sanity check in case our 2 db stretch got out of + * range. */ + if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER) + gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER; + + /* For the first curve (lower power) + * start from 0 dB */ + if (pdg == 0) + pdadc_0 = 0; + else + /* For the other curves use the gain overlap */ + pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) - + pd_gain_overlap; - ATH5K_TRACE(ah->ah_sc); - if (txpower > AR5K_TUNE_MAX_TXPOWER) { - ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); - return -EINVAL; + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1) + pwr_step = pdadc_tmp[1] - pdadc_tmp[0]; + else + pwr_step = 1; + + /* If pdadc_0 is negative, we need to extrapolate + * below this pdgain by a number of pwr_steps */ + while ((pdadc_0 < 0) && (pdadc_i < 128)) { + s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step; + pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp; + pdadc_0++; + } + + /* Set last pwr level, using gain boundaries */ + pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg]; + /* Limit it to be inside pwr range */ + table_size = pwr_max[pdg] - pwr_min[pdg]; + max_idx = (pdadc_n < table_size) ? pdadc_n : table_size; + + /* Fill pdadc_out table */ + while (pdadc_0 < max_idx) + pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++]; + + /* Need to extrapolate above this pdgain? */ + if (pdadc_n <= max_idx) + continue; + + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1) + pwr_step = pdadc_tmp[table_size - 1] - + pdadc_tmp[table_size - 2]; + else + pwr_step = 1; + + /* Extrapolate above */ + while ((pdadc_0 < (s16) pdadc_n) && + (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) { + s16 tmp = pdadc_tmp[table_size - 1] + + (pdadc_0 - max_idx) * pwr_step; + pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp; + pdadc_0++; + } + } + + while (pdg < AR5K_EEPROM_N_PD_GAINS) { + gain_boundaries[pdg] = gain_boundaries[pdg - 1]; + pdg++; + } + + while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) { + pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1]; + pdadc_i++; } + /* Set gain boundaries */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(pd_gain_overlap, + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) | + AR5K_REG_SM(gain_boundaries[0], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) | + AR5K_REG_SM(gain_boundaries[1], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) | + AR5K_REG_SM(gain_boundaries[2], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) | + AR5K_REG_SM(gain_boundaries[3], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4), + AR5K_PHY_TPC_RG5); + + /* Used for setting rate power table */ + ah->ah_txpower.txp_min_idx = pwr_min[0]; + +} + +/* Write PDADC values on hw */ +static void +ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, + u8 pdcurves, u8 *pdg_to_idx) +{ + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u32 reg; + u8 i; + + /* Select the right pdgain curves */ + + /* Clear current settings */ + reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1); + reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 | + AR5K_PHY_TPC_RG1_PDGAIN_2 | + AR5K_PHY_TPC_RG1_PDGAIN_3 | + AR5K_PHY_TPC_RG1_NUM_PD_GAIN); + /* - * RF2413 for some reason can't - * transmit anything if we call - * this funtion, so we skip it - * until we fix txpower. + * Use pd_gains curve from eeprom * - * XXX: Assume same for RF2425 - * to be safe. + * This overrides the default setting from initvals + * in case some vendors (e.g. Zcomax) don't use the default + * curves. If we don't honor their settings we 'll get a + * 5dB (1 * gain overlap ?) drop. */ - if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425)) - return 0; - - /* Reset TX power values */ - memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); - ah->ah_txpower.txp_tpc = tpc; + reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN); - /* Initialize TX power table */ - ath5k_txpower_table(ah, channel, txpower); + switch (pdcurves) { + case 3: + reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3); + /* Fall through */ + case 2: + reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2); + /* Fall through */ + case 1: + reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1); + break; + } + ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1); /* * Write TX power values */ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { ath5k_hw_reg_write(ah, - ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) | - (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff), - AR5K_PHY_PCDAC_TXPOWER(i)); + ((pdadc_out[4*i + 0] & 0xff) << 0) | + ((pdadc_out[4*i + 1] & 0xff) << 8) | + ((pdadc_out[4*i + 2] & 0xff) << 16) | + ((pdadc_out[4*i + 3] & 0xff) << 24), + AR5K_PHY_PDADC_TXPOWER(i)); + } +} + + +/* + * Common code for PCDAC/PDADC tables + */ + +/* + * This is the main function that uses all of the above + * to set PCDAC/PDADC table on hw for the current channel. + * This table is used for tx power calibration on the basband, + * without it we get weird tx power levels and in some cases + * distorted spectral mask + */ +static int +ath5k_setup_channel_powertable(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + u8 ee_mode, u8 type) +{ + struct ath5k_pdgain_info *pdg_L, *pdg_R; + struct ath5k_chan_pcal_info *pcinfo_L; + struct ath5k_chan_pcal_info *pcinfo_R; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode]; + s16 table_min[AR5K_EEPROM_N_PD_GAINS]; + s16 table_max[AR5K_EEPROM_N_PD_GAINS]; + u8 *tmpL; + u8 *tmpR; + u32 target = channel->center_freq; + int pdg, i; + + /* Get surounding freq piers for this channel */ + ath5k_get_chan_pcal_surrounding_piers(ah, channel, + &pcinfo_L, + &pcinfo_R); + + /* Loop over pd gain curves on + * surounding freq piers by index */ + for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) { + + /* Fill curves in reverse order + * from lower power (max gain) + * to higher power. Use curve -> idx + * backmaping we did on eeprom init */ + u8 idx = pdg_curve_to_idx[pdg]; + + /* Grab the needed curves by index */ + pdg_L = &pcinfo_L->pd_curves[idx]; + pdg_R = &pcinfo_R->pd_curves[idx]; + + /* Initialize the temp tables */ + tmpL = ah->ah_txpower.tmpL[pdg]; + tmpR = ah->ah_txpower.tmpR[pdg]; + + /* Set curve's x boundaries and create + * curves so that they cover the same + * range (if we don't do that one table + * will have values on some range and the + * other one won't have any so interpolation + * will fail) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]) / 2; + + table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2; + + /* Now create the curves on surrounding channels + * and interpolate if needed to get the final + * curve for this gain on this channel */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* Override min/max so that we don't loose + * accuracy (don't divide by 2) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]); + + table_max[pdg] = + max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]); + + /* Override minimum so that we don't get + * out of bounds while extrapolating + * below. Don't do this when we have 2 + * curves and we are on the high power curve + * because table_min is ok in this case */ + if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) { + + table_min[pdg] = + ath5k_get_linear_pcdac_min(pdg_L->pd_step, + pdg_R->pd_step, + pdg_L->pd_pwr, + pdg_R->pd_pwr); + + /* Don't go too low because we will + * miss the upper part of the curve. + * Note: 126 = 31.5dB (max power supported) + * in 0.25dB units */ + if (table_max[pdg] - table_min[pdg] > 126) + table_min[pdg] = table_max[pdg] - 126; + } + + /* Fall through */ + case AR5K_PWRTABLE_PWR_TO_PCDAC: + case AR5K_PWRTABLE_PWR_TO_PDADC: + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_L->pd_pwr, + pdg_L->pd_step, + pdg_L->pd_points, tmpL, type); + + /* We are in a calibration + * pier, no need to interpolate + * between freq piers */ + if (pcinfo_L == pcinfo_R) + continue; + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_R->pd_pwr, + pdg_R->pd_step, + pdg_R->pd_points, tmpR, type); + break; + default: + return -EINVAL; + } + + /* Interpolate between curves + * of surounding freq piers to + * get the final curve for this + * pd gain. Re-use tmpL for interpolation + * output */ + for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + tmpL[i] = (u8) ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + (s16) tmpL[i], + (s16) tmpR[i]); + } + } + + /* Now we have a set of curves for this + * channel on tmpL (x range is table_max - table_min + * and y values are tmpL[pdg][]) sorted in the same + * order as EEPROM (because we've used the backmaping). + * So for RF5112 it's from higher power to lower power + * and for RF2413 it's from lower power to higher power. + * For RF5111 we only have one curve. */ + + /* Fill min and max power levels for this + * channel by interpolating the values on + * surounding channels to complete the dataset */ + ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->min_pwr, pcinfo_R->min_pwr); + + ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->max_pwr, pcinfo_R->max_pwr); + + /* We are ready to go, fill PCDAC/PDADC + * table and write settings on hardware */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* For RF5112 we can have one or two curves + * and each curve covers a certain power lvl + * range so we need to do some more processing */ + ath5k_combine_linear_pcdac_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Set txp.offset so that we can + * match max power value with max + * table index */ + ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); + + /* Write settings on hw */ + ath5k_setup_pcdac_table(ah); + break; + case AR5K_PWRTABLE_PWR_TO_PCDAC: + /* We are done for RF5111 since it has only + * one curve, just fit the curve on the table */ + ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max); + + /* No rate powertable adjustment for RF5111 */ + ah->ah_txpower.txp_min_idx = 0; + ah->ah_txpower.txp_offset = 0; + + /* Write settings on hw */ + ath5k_setup_pcdac_table(ah); + break; + case AR5K_PWRTABLE_PWR_TO_PDADC: + /* Set PDADC boundaries and fill + * final PDADC table */ + ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Write settings on hw */ + ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx); + + /* Set txp.offset, note that table_min + * can be negative */ + ah->ah_txpower.txp_offset = table_min[0]; + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* + * Per-rate tx power setting + * + * This is the code that sets the desired tx power (below + * maximum) on hw for each rate (we also have TPC that sets + * power per packet). We do that by providing an index on the + * PCDAC/PDADC table we set up. + */ + +/* + * Set rate power table + * + * For now we only limit txpower based on maximum tx power + * supported by hw (what's inside rate_info). We need to limit + * this even more, based on regulatory domain etc. + * + * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps) + * and is indexed as follows: + * rates[0] - rates[7] -> OFDM rates + * rates[8] - rates[14] -> CCK rates + * rates[15] -> XR rates (they all have the same power) + */ +static void +ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, + struct ath5k_rate_pcal_info *rate_info, + u8 ee_mode) +{ + unsigned int i; + u16 *rates; + + /* max_pwr is power level we got from driver/user in 0.5dB + * units, switch to 0.25dB units so we can compare */ + max_pwr *= 2; + max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2; + + /* apply rate limits */ + rates = ah->ah_txpower.txp_rates_power_table; + + /* OFDM rates 6 to 24Mb/s */ + for (i = 0; i < 5; i++) + rates[i] = min(max_pwr, rate_info->target_power_6to24); + + /* Rest OFDM rates */ + rates[5] = min(rates[0], rate_info->target_power_36); + rates[6] = min(rates[0], rate_info->target_power_48); + rates[7] = min(rates[0], rate_info->target_power_54); + + /* CCK rates */ + /* 1L */ + rates[8] = min(rates[0], rate_info->target_power_6to24); + /* 2L */ + rates[9] = min(rates[0], rate_info->target_power_36); + /* 2S */ + rates[10] = min(rates[0], rate_info->target_power_36); + /* 5L */ + rates[11] = min(rates[0], rate_info->target_power_48); + /* 5S */ + rates[12] = min(rates[0], rate_info->target_power_48); + /* 11L */ + rates[13] = min(rates[0], rate_info->target_power_54); + /* 11S */ + rates[14] = min(rates[0], rate_info->target_power_54); + + /* XR rates */ + rates[15] = min(rates[0], rate_info->target_power_6to24); + + /* CCK rates have different peak to average ratio + * so we have to tweak their power so that gainf + * correction works ok. For this we use OFDM to + * CCK delta from eeprom */ + if ((ee_mode == AR5K_EEPROM_MODE_11G) && + (ah->ah_phy_revision < AR5K_SREV_PHY_5212A)) + for (i = 8; i <= 15; i++) + rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + + ah->ah_txpower.txp_min_pwr = rates[7]; + ah->ah_txpower.txp_max_pwr = rates[0]; + ah->ah_txpower.txp_ofdm = rates[7]; +} + + +/* + * Set transmition power + */ +int +ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 ee_mode, u8 txpower) +{ + struct ath5k_rate_pcal_info rate_info; + u8 type; + int ret; + + ATH5K_TRACE(ah->ah_sc); + if (txpower > AR5K_TUNE_MAX_TXPOWER) { + ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); + return -EINVAL; + } + if (txpower == 0) + txpower = AR5K_TUNE_DEFAULT_TXPOWER; + + /* Reset TX power values */ + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_txpower.txp_min_pwr = 0; + ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER; + + /* Initialize TX power table */ + switch (ah->ah_radio) { + case AR5K_RF5111: + type = AR5K_PWRTABLE_PWR_TO_PCDAC; + break; + case AR5K_RF5112: + type = AR5K_PWRTABLE_LINEAR_PCDAC; + break; + case AR5K_RF2413: + case AR5K_RF5413: + case AR5K_RF2316: + case AR5K_RF2317: + case AR5K_RF2425: + type = AR5K_PWRTABLE_PWR_TO_PDADC; + break; + default: + return -EINVAL; } + /* FIXME: Only on channel/mode change */ + ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); + if (ret) + return ret; + + /* Limit max power if we have a CTL available */ + ath5k_get_max_ctl_power(ah, channel); + + /* FIXME: Tx power limit for this regdomain + * XXX: Mac80211/CRDA will do that anyway ? */ + + /* FIXME: Antenna reduction stuff */ + + /* FIXME: Limit power on turbo modes */ + + /* FIXME: TPC scale reduction */ + + /* Get surounding channels for per-rate power table + * calibration */ + ath5k_get_rate_pcal_data(ah, channel, &rate_info); + + /* Setup rate power table */ + ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode); + + /* Write rate power table on hw */ ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) | AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1); @@ -2481,26 +2566,34 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); - if (ah->ah_txpower.txp_tpc) + /* FIXME: TPC support */ + if (ah->ah_txpower.txp_tpc) { ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); - else + + ath5k_hw_reg_write(ah, + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), + AR5K_TPC); + } else { ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + } return 0; } -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower) { /*Just a try M.F.*/ struct ieee80211_channel *channel = &ah->ah_current_channel; ATH5K_TRACE(ah->ah_sc); ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, - "changing txpower to %d\n", power); + "changing txpower to %d\n", txpower); - return ath5k_hw_txpower(ah, channel, power); + return ath5k_hw_txpower(ah, channel, mode, txpower); } #undef _ATH5K_PHY |
