diff options
Diffstat (limited to 'drivers/net/wireless/ath/wil6210/pcie_bus.c')
| -rw-r--r-- | drivers/net/wireless/ath/wil6210/pcie_bus.c | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c new file mode 100644 index 000000000000..0fc83edd6bad --- /dev/null +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -0,0 +1,223 @@ +/* + * Copyright (c) 2012 Qualcomm Atheros, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/netdevice.h> +#include <linux/debugfs.h> +#include <linux/pci.h> +#include <linux/moduleparam.h> + +#include "wil6210.h" + +static int use_msi = 1; +module_param(use_msi, int, S_IRUGO); +MODULE_PARM_DESC(use_msi, + " Use MSI interrupt: " + "0 - don't, 1 - (default) - single, or 3"); + +/* Bus ops */ +static int wil_if_pcie_enable(struct wil6210_priv *wil) +{ + struct pci_dev *pdev = wil->pdev; + int rc; + + pci_set_master(pdev); + + /* + * how many MSI interrupts to request? + */ + switch (use_msi) { + case 3: + case 1: + case 0: + break; + default: + wil_err(wil, "Invalid use_msi=%d, default to 1\n", + use_msi); + use_msi = 1; + } + wil->n_msi = use_msi; + if (wil->n_msi) { + wil_dbg(wil, "Setup %d MSI interrupts\n", use_msi); + rc = pci_enable_msi_block(pdev, wil->n_msi); + if (rc && (wil->n_msi == 3)) { + wil_err(wil, "3 MSI mode failed, try 1 MSI\n"); + wil->n_msi = 1; + rc = pci_enable_msi_block(pdev, wil->n_msi); + } + if (rc) { + wil_err(wil, "pci_enable_msi failed, use INTx\n"); + wil->n_msi = 0; + } + } else { + wil_dbg(wil, "MSI interrupts disabled, use INTx\n"); + } + + rc = wil6210_init_irq(wil, pdev->irq); + if (rc) + goto stop_master; + + /* need reset here to obtain MAC */ + rc = wil_reset(wil); + if (rc) + goto release_irq; + + return 0; + + release_irq: + wil6210_fini_irq(wil, pdev->irq); + /* safe to call if no MSI */ + pci_disable_msi(pdev); + stop_master: + pci_clear_master(pdev); + return rc; +} + +static int wil_if_pcie_disable(struct wil6210_priv *wil) +{ + struct pci_dev *pdev = wil->pdev; + + pci_clear_master(pdev); + /* disable and release IRQ */ + wil6210_fini_irq(wil, pdev->irq); + /* safe to call if no MSI */ + pci_disable_msi(pdev); + /* TODO: disable HW */ + + return 0; +} + +static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct wil6210_priv *wil; + struct device *dev = &pdev->dev; + void __iomem *csr; + int rc; + + /* check HW */ + dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n", + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); + + if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) { + dev_err(&pdev->dev, "Not " WIL_NAME "? " + "BAR0 size is %lu while expecting %lu\n", + (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE); + return -ENODEV; + } + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "pci_enable_device failed\n"); + return -ENODEV; + } + /* rollback to err_disable_pdev */ + + rc = pci_request_region(pdev, 0, WIL_NAME); + if (rc) { + dev_err(&pdev->dev, "pci_request_region failed\n"); + goto err_disable_pdev; + } + /* rollback to err_release_reg */ + + csr = pci_ioremap_bar(pdev, 0); + if (!csr) { + dev_err(&pdev->dev, "pci_ioremap_bar failed\n"); + rc = -ENODEV; + goto err_release_reg; + } + /* rollback to err_iounmap */ + dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr); + + wil = wil_if_alloc(dev, csr); + if (IS_ERR(wil)) { + rc = (int)PTR_ERR(wil); + dev_err(dev, "wil_if_alloc failed: %d\n", rc); + goto err_iounmap; + } + /* rollback to if_free */ + + pci_set_drvdata(pdev, wil); + wil->pdev = pdev; + + /* FW should raise IRQ when ready */ + rc = wil_if_pcie_enable(wil); + if (rc) { + wil_err(wil, "Enable device failed\n"); + goto if_free; + } + /* rollback to bus_disable */ + + rc = wil_if_add(wil); + if (rc) { + wil_err(wil, "wil_if_add failed: %d\n", rc); + goto bus_disable; + } + + wil6210_debugfs_init(wil); + + /* check FW is alive */ + wmi_echo(wil); + + return 0; + + bus_disable: + wil_if_pcie_disable(wil); + if_free: + wil_if_free(wil); + err_iounmap: + pci_iounmap(pdev, csr); + err_release_reg: + pci_release_region(pdev, 0); + err_disable_pdev: + pci_disable_device(pdev); + + return rc; +} + +static void wil_pcie_remove(struct pci_dev *pdev) +{ + struct wil6210_priv *wil = pci_get_drvdata(pdev); + + wil6210_debugfs_remove(wil); + wil_if_pcie_disable(wil); + wil_if_remove(wil); + wil_if_free(wil); + pci_iounmap(pdev, wil->csr); + pci_release_region(pdev, 0); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = { + { PCI_DEVICE(0x1ae9, 0x0301) }, + { /* end: all zeroes */ }, +}; +MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids); + +static struct pci_driver wil6210_driver = { + .probe = wil_pcie_probe, + .remove = wil_pcie_remove, + .id_table = wil6210_pcie_ids, + .name = WIL_NAME, +}; + +module_pci_driver(wil6210_driver); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>"); +MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card"); |
