diff options
Diffstat (limited to 'drivers/net/wireless/ath/carl9170/usb.c')
| -rw-r--r-- | drivers/net/wireless/ath/carl9170/usb.c | 1136 |
1 files changed, 1136 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c new file mode 100644 index 000000000000..c7f6193934ea --- /dev/null +++ b/drivers/net/wireless/ath/carl9170/usb.c @@ -0,0 +1,1136 @@ +/* + * Atheros CARL9170 driver + * + * USB - frontend + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * Copyright 2009, 2010, Christian Lamparter <chunkeey@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <linux/device.h> +#include <net/mac80211.h> +#include "carl9170.h" +#include "cmd.h" +#include "hw.h" +#include "fwcmd.h" + +MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); +MODULE_AUTHOR("Christian Lamparter <chunkeey@googlemail.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); +MODULE_FIRMWARE(CARL9170FW_NAME); +MODULE_ALIAS("ar9170usb"); +MODULE_ALIAS("arusb_lnx"); + +/* + * Note: + * + * Always update our wiki's device list (located at: + * http://wireless.kernel.org/en/users/Drivers/ar9170/devices ), + * whenever you add a new device. + */ +static struct usb_device_id carl9170_usb_ids[] = { + /* Atheros 9170 */ + { USB_DEVICE(0x0cf3, 0x9170) }, + /* Atheros TG121N */ + { USB_DEVICE(0x0cf3, 0x1001) }, + /* TP-Link TL-WN821N v2 */ + { USB_DEVICE(0x0cf3, 0x1002), .driver_info = CARL9170_WPS_BUTTON | + CARL9170_ONE_LED }, + /* 3Com Dual Band 802.11n USB Adapter */ + { USB_DEVICE(0x0cf3, 0x1010) }, + /* H3C Dual Band 802.11n USB Adapter */ + { USB_DEVICE(0x0cf3, 0x1011) }, + /* Cace Airpcap NX */ + { USB_DEVICE(0xcace, 0x0300) }, + /* D-Link DWA 160 A1 */ + { USB_DEVICE(0x07d1, 0x3c10) }, + /* D-Link DWA 160 A2 */ + { USB_DEVICE(0x07d1, 0x3a09) }, + /* Netgear WNA1000 */ + { USB_DEVICE(0x0846, 0x9040) }, + /* Netgear WNDA3100 */ + { USB_DEVICE(0x0846, 0x9010) }, + /* Netgear WN111 v2 */ + { USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED }, + /* Zydas ZD1221 */ + { USB_DEVICE(0x0ace, 0x1221) }, + /* Proxim ORiNOCO 802.11n USB */ + { USB_DEVICE(0x1435, 0x0804) }, + /* WNC Generic 11n USB Dongle */ + { USB_DEVICE(0x1435, 0x0326) }, + /* ZyXEL NWD271N */ + { USB_DEVICE(0x0586, 0x3417) }, + /* Z-Com UB81 BG */ + { USB_DEVICE(0x0cde, 0x0023) }, + /* Z-Com UB82 ABG */ + { USB_DEVICE(0x0cde, 0x0026) }, + /* Sphairon Homelink 1202 */ + { USB_DEVICE(0x0cde, 0x0027) }, + /* Arcadyan WN7512 */ + { USB_DEVICE(0x083a, 0xf522) }, + /* Planex GWUS300 */ + { USB_DEVICE(0x2019, 0x5304) }, + /* IO-Data WNGDNUS2 */ + { USB_DEVICE(0x04bb, 0x093f) }, + /* NEC WL300NU-G */ + { USB_DEVICE(0x0409, 0x0249) }, + /* AVM FRITZ!WLAN USB Stick N */ + { USB_DEVICE(0x057c, 0x8401) }, + /* AVM FRITZ!WLAN USB Stick N 2.4 */ + { USB_DEVICE(0x057c, 0x8402) }, + /* Qwest/Actiontec 802AIN Wireless N USB Network Adapter */ + { USB_DEVICE(0x1668, 0x1200) }, + + /* terminate */ + {} +}; +MODULE_DEVICE_TABLE(usb, carl9170_usb_ids); + +static void carl9170_usb_submit_data_urb(struct ar9170 *ar) +{ + struct urb *urb; + int err; + + if (atomic_inc_return(&ar->tx_anch_urbs) > AR9170_NUM_TX_URBS) + goto err_acc; + + urb = usb_get_from_anchor(&ar->tx_wait); + if (!urb) + goto err_acc; + + usb_anchor_urb(urb, &ar->tx_anch); + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (unlikely(err)) { + if (net_ratelimit()) { + dev_err(&ar->udev->dev, "tx submit failed (%d)\n", + urb->status); + } + + usb_unanchor_urb(urb); + usb_anchor_urb(urb, &ar->tx_err); + } + + usb_free_urb(urb); + + if (likely(err == 0)) + return; + +err_acc: + atomic_dec(&ar->tx_anch_urbs); +} + +static void carl9170_usb_tx_data_complete(struct urb *urb) +{ + struct ar9170 *ar = (struct ar9170 *) + usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); + + if (WARN_ON_ONCE(!ar)) { + dev_kfree_skb_irq(urb->context); + return; + } + + atomic_dec(&ar->tx_anch_urbs); + + switch (urb->status) { + /* everything is fine */ + case 0: + carl9170_tx_callback(ar, (void *)urb->context); + break; + + /* disconnect */ + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + /* + * Defer the frame clean-up to the tasklet worker. + * This is necessary, because carl9170_tx_drop + * does not work in an irqsave context. + */ + usb_anchor_urb(urb, &ar->tx_err); + return; + + /* a random transmission error has occurred? */ + default: + if (net_ratelimit()) { + dev_err(&ar->udev->dev, "tx failed (%d)\n", + urb->status); + } + + usb_anchor_urb(urb, &ar->tx_err); + break; + } + + if (likely(IS_STARTED(ar))) + carl9170_usb_submit_data_urb(ar); +} + +static int carl9170_usb_submit_cmd_urb(struct ar9170 *ar) +{ + struct urb *urb; + int err; + + if (atomic_inc_return(&ar->tx_cmd_urbs) != 1) { + atomic_dec(&ar->tx_cmd_urbs); + return 0; + } + + urb = usb_get_from_anchor(&ar->tx_cmd); + if (!urb) { + atomic_dec(&ar->tx_cmd_urbs); + return 0; + } + + usb_anchor_urb(urb, &ar->tx_anch); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (unlikely(err)) { + usb_unanchor_urb(urb); + atomic_dec(&ar->tx_cmd_urbs); + } + usb_free_urb(urb); + + return err; +} + +static void carl9170_usb_cmd_complete(struct urb *urb) +{ + struct ar9170 *ar = urb->context; + int err = 0; + + if (WARN_ON_ONCE(!ar)) + return; + + atomic_dec(&ar->tx_cmd_urbs); + + switch (urb->status) { + /* everything is fine */ + case 0: + break; + + /* disconnect */ + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + return; + + default: + err = urb->status; + break; + } + + if (!IS_INITIALIZED(ar)) + return; + + if (err) + dev_err(&ar->udev->dev, "submit cmd cb failed (%d).\n", err); + + err = carl9170_usb_submit_cmd_urb(ar); + if (err) + dev_err(&ar->udev->dev, "submit cmd failed (%d).\n", err); +} + +static void carl9170_usb_rx_irq_complete(struct urb *urb) +{ + struct ar9170 *ar = urb->context; + + if (WARN_ON_ONCE(!ar)) + return; + + switch (urb->status) { + /* everything is fine */ + case 0: + break; + + /* disconnect */ + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + return; + + default: + goto resubmit; + } + + carl9170_handle_command_response(ar, urb->transfer_buffer, + urb->actual_length); + +resubmit: + usb_anchor_urb(urb, &ar->rx_anch); + if (unlikely(usb_submit_urb(urb, GFP_ATOMIC))) + usb_unanchor_urb(urb); +} + +static int carl9170_usb_submit_rx_urb(struct ar9170 *ar, gfp_t gfp) +{ + struct urb *urb; + int err = 0, runs = 0; + + while ((atomic_read(&ar->rx_anch_urbs) < AR9170_NUM_RX_URBS) && + (runs++ < AR9170_NUM_RX_URBS)) { + err = -ENOSPC; + urb = usb_get_from_anchor(&ar->rx_pool); + if (urb) { + usb_anchor_urb(urb, &ar->rx_anch); + err = usb_submit_urb(urb, gfp); + if (unlikely(err)) { + usb_unanchor_urb(urb); + usb_anchor_urb(urb, &ar->rx_pool); + } else { + atomic_dec(&ar->rx_pool_urbs); + atomic_inc(&ar->rx_anch_urbs); + } + usb_free_urb(urb); + } + } + + return err; +} + +static void carl9170_usb_rx_work(struct ar9170 *ar) +{ + struct urb *urb; + int i; + + for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { + urb = usb_get_from_anchor(&ar->rx_work); + if (!urb) + break; + + atomic_dec(&ar->rx_work_urbs); + if (IS_INITIALIZED(ar)) { + carl9170_rx(ar, urb->transfer_buffer, + urb->actual_length); + } + + usb_anchor_urb(urb, &ar->rx_pool); + atomic_inc(&ar->rx_pool_urbs); + + usb_free_urb(urb); + + carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); + } +} + +void carl9170_usb_handle_tx_err(struct ar9170 *ar) +{ + struct urb *urb; + + while ((urb = usb_get_from_anchor(&ar->tx_err))) { + struct sk_buff *skb = (void *)urb->context; + + carl9170_tx_drop(ar, skb); + carl9170_tx_callback(ar, skb); + usb_free_urb(urb); + } +} + +static void carl9170_usb_tasklet(unsigned long data) +{ + struct ar9170 *ar = (struct ar9170 *) data; + + if (!IS_INITIALIZED(ar)) + return; + + carl9170_usb_rx_work(ar); + + /* + * Strictly speaking: The tx scheduler is not part of the USB system. + * But the rx worker returns frames back to the mac80211-stack and + * this is the _perfect_ place to generate the next transmissions. + */ + if (IS_STARTED(ar)) + carl9170_tx_scheduler(ar); +} + +static void carl9170_usb_rx_complete(struct urb *urb) +{ + struct ar9170 *ar = (struct ar9170 *)urb->context; + int err; + + if (WARN_ON_ONCE(!ar)) + return; + + atomic_dec(&ar->rx_anch_urbs); + + switch (urb->status) { + case 0: + /* rx path */ + usb_anchor_urb(urb, &ar->rx_work); + atomic_inc(&ar->rx_work_urbs); + break; + + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + /* handle disconnect events*/ + return; + + default: + /* handle all other errors */ + usb_anchor_urb(urb, &ar->rx_pool); + atomic_inc(&ar->rx_pool_urbs); + break; + } + + err = carl9170_usb_submit_rx_urb(ar, GFP_ATOMIC); + if (unlikely(err)) { + /* + * usb_submit_rx_urb reported a problem. + * In case this is due to a rx buffer shortage, + * elevate the tasklet worker priority to + * the highest available level. + */ + tasklet_hi_schedule(&ar->usb_tasklet); + + if (atomic_read(&ar->rx_anch_urbs) == 0) { + /* + * The system is too slow to cope with + * the enormous workload. We have simply + * run out of active rx urbs and this + * unfortunatly leads to an unpredictable + * device. + */ + + carl9170_restart(ar, CARL9170_RR_SLOW_SYSTEM); + } + } else { + /* + * Using anything less than _high_ priority absolutely + * kills the rx performance my UP-System... + */ + tasklet_hi_schedule(&ar->usb_tasklet); + } +} + +static struct urb *carl9170_usb_alloc_rx_urb(struct ar9170 *ar, gfp_t gfp) +{ + struct urb *urb; + void *buf; + + buf = kmalloc(ar->fw.rx_size, gfp); + if (!buf) + return NULL; + + urb = usb_alloc_urb(0, gfp); + if (!urb) { + kfree(buf); + return NULL; + } + + usb_fill_bulk_urb(urb, ar->udev, usb_rcvbulkpipe(ar->udev, + AR9170_USB_EP_RX), buf, ar->fw.rx_size, + carl9170_usb_rx_complete, ar); + + urb->transfer_flags |= URB_FREE_BUFFER; + + return urb; +} + +static int carl9170_usb_send_rx_irq_urb(struct ar9170 *ar) +{ + struct urb *urb = NULL; + void *ibuf; + int err = -ENOMEM; + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto out; + + ibuf = kmalloc(AR9170_USB_EP_CTRL_MAX, GFP_KERNEL); + if (!ibuf) + goto out; + + usb_fill_int_urb(urb, ar->udev, usb_rcvintpipe(ar->udev, + AR9170_USB_EP_IRQ), ibuf, AR9170_USB_EP_CTRL_MAX, + carl9170_usb_rx_irq_complete, ar, 1); + + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_anchor_urb(urb, &ar->rx_anch); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) + usb_unanchor_urb(urb); + +out: + usb_free_urb(urb); + return err; +} + +static int carl9170_usb_init_rx_bulk_urbs(struct ar9170 *ar) +{ + struct urb *urb; + int i, err = -EINVAL; + + /* + * The driver actively maintains a second shadow + * pool for inactive, but fully-prepared rx urbs. + * + * The pool should help the driver to master huge + * workload spikes without running the risk of + * undersupplying the hardware or wasting time by + * processing rx data (streams) inside the urb + * completion (hardirq context). + */ + for (i = 0; i < AR9170_NUM_RX_URBS_POOL; i++) { + urb = carl9170_usb_alloc_rx_urb(ar, GFP_KERNEL); + if (!urb) { + err = -ENOMEM; + goto err_out; + } + + usb_anchor_urb(urb, &ar->rx_pool); + atomic_inc(&ar->rx_pool_urbs); + usb_free_urb(urb); + } + + err = carl9170_usb_submit_rx_urb(ar, GFP_KERNEL); + if (err) + goto err_out; + + /* the device now waiting for the firmware. */ + carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); + return 0; + +err_out: + + usb_scuttle_anchored_urbs(&ar->rx_pool); + usb_scuttle_anchored_urbs(&ar->rx_work); + usb_kill_anchored_urbs(&ar->rx_anch); + return err; +} + +static int carl9170_usb_flush(struct ar9170 *ar) +{ + struct urb *urb; + int ret, err = 0; + + while ((urb = usb_get_from_anchor(&ar->tx_wait))) { + struct sk_buff *skb = (void *)urb->context; + carl9170_tx_drop(ar, skb); + carl9170_tx_callback(ar, skb); + usb_free_urb(urb); + } + + ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ); + if (ret == 0) + err = -ETIMEDOUT; + + /* lets wait a while until the tx - queues are dried out */ + ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ); + if (ret == 0) + err = -ETIMEDOUT; + + usb_kill_anchored_urbs(&ar->tx_anch); + carl9170_usb_handle_tx_err(ar); + + return err; +} + +static void carl9170_usb_cancel_urbs(struct ar9170 *ar) +{ + int err; + + carl9170_set_state(ar, CARL9170_UNKNOWN_STATE); + + err = carl9170_usb_flush(ar); + if (err) + dev_err(&ar->udev->dev, "stuck tx urbs!\n"); + + usb_poison_anchored_urbs(&ar->tx_anch); + carl9170_usb_handle_tx_err(ar); + usb_poison_anchored_urbs(&ar->rx_anch); + + tasklet_kill(&ar->usb_tasklet); + + usb_scuttle_anchored_urbs(&ar->rx_work); + usb_scuttle_anchored_urbs(&ar->rx_pool); + usb_scuttle_anchored_urbs(&ar->tx_cmd); +} + +int __carl9170_exec_cmd(struct ar9170 *ar, struct carl9170_cmd *cmd, + const bool free_buf) +{ + struct urb *urb; + + if (!IS_INITIALIZED(ar)) + return -EPERM; + + if (WARN_ON(cmd->hdr.len > CARL9170_MAX_CMD_LEN - 4)) + return -EINVAL; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + return -ENOMEM; + + usb_fill_int_urb(urb, ar->udev, usb_sndintpipe(ar->udev, + AR9170_USB_EP_CMD), cmd, cmd->hdr.len + 4, + carl9170_usb_cmd_complete, ar, 1); + + if (free_buf) + urb->transfer_flags |= URB_FREE_BUFFER; + + usb_anchor_urb(urb, &ar->tx_cmd); + usb_free_urb(urb); + + return carl9170_usb_submit_cmd_urb(ar); +} + +int carl9170_exec_cmd(struct ar9170 *ar, const enum carl9170_cmd_oids cmd, + unsigned int plen, void *payload, unsigned int outlen, void *out) +{ + int err = -ENOMEM; + + if (!IS_ACCEPTING_CMD(ar)) + return -EIO; + + if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) + might_sleep(); + + ar->cmd.hdr.len = plen; + ar->cmd.hdr.cmd = cmd; + /* writing multiple regs fills this buffer already */ + if (plen && payload != (u8 *)(ar->cmd.data)) + memcpy(ar->cmd.data, payload, plen); + + spin_lock_bh(&ar->cmd_lock); + ar->readbuf = (u8 *)out; + ar->readlen = outlen; + spin_unlock_bh(&ar->cmd_lock); + + err = __carl9170_exec_cmd(ar, &ar->cmd, false); + + if (!(cmd & CARL9170_CMD_ASYNC_FLAG)) { + err = wait_for_completion_timeout(&ar->cmd_wait, HZ); + if (err == 0) { + err = -ETIMEDOUT; + goto err_unbuf; + } + + if (ar->readlen != outlen) { + err = -EMSGSIZE; + goto err_unbuf; + } + } + + return 0; + +err_unbuf: + /* Maybe the device was removed in the moment we were waiting? */ + if (IS_STARTED(ar)) { + dev_err(&ar->udev->dev, "no command feedback " + "received (%d).\n", err); + + /* provide some maybe useful debug information */ + print_hex_dump_bytes("carl9170 cmd: ", DUMP_PREFIX_NONE, + &ar->cmd, plen + 4); + + carl9170_restart(ar, CARL9170_RR_COMMAND_TIMEOUT); + } + + /* invalidate to avoid completing the next command prematurely */ + spin_lock_bh(&ar->cmd_lock); + ar->readbuf = NULL; + ar->readlen = 0; + spin_unlock_bh(&ar->cmd_lock); + + return err; +} + +void carl9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb) +{ + struct urb *urb; + struct ar9170_stream *tx_stream; + void *data; + unsigned int len; + + if (!IS_STARTED(ar)) + goto err_drop; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + goto err_drop; + + if (ar->fw.tx_stream) { + tx_stream = (void *) (skb->data - sizeof(*tx_stream)); + + len = skb->len + sizeof(*tx_stream); + tx_stream->length = cpu_to_le16(len); + tx_stream->tag = cpu_to_le16(AR9170_TX_STREAM_TAG); + data = tx_stream; + } else { + data = skb->data; + len = skb->len; + } + + usb_fill_bulk_urb(urb, ar->udev, usb_sndbulkpipe(ar->udev, + AR9170_USB_EP_TX), data, len, + carl9170_usb_tx_data_complete, skb); + + urb->transfer_flags |= URB_ZERO_PACKET; + + usb_anchor_urb(urb, &ar->tx_wait); + + usb_free_urb(urb); + + carl9170_usb_submit_data_urb(ar); + return; + +err_drop: + carl9170_tx_drop(ar, skb); + carl9170_tx_callback(ar, skb); +} + +static void carl9170_release_firmware(struct ar9170 *ar) +{ + if (ar->fw.fw) { + release_firmware(ar->fw.fw); + memset(&ar->fw, 0, sizeof(ar->fw)); + } +} + +void carl9170_usb_stop(struct ar9170 *ar) +{ + int ret; + + carl9170_set_state_when(ar, CARL9170_IDLE, CARL9170_STOPPED); + + ret = carl9170_usb_flush(ar); + if (ret) + dev_err(&ar->udev->dev, "kill pending tx urbs.\n"); + + usb_poison_anchored_urbs(&ar->tx_anch); + carl9170_usb_handle_tx_err(ar); + + /* kill any pending command */ + spin_lock_bh(&ar->cmd_lock); + ar->readlen = 0; + spin_unlock_bh(&ar->cmd_lock); + complete_all(&ar->cmd_wait); + + /* This is required to prevent an early completion on _start */ + INIT_COMPLETION(ar->cmd_wait); + + /* + * Note: + * So far we freed all tx urbs, but we won't dare to touch any rx urbs. + * Else we would end up with a unresponsive device... + */ +} + +int carl9170_usb_open(struct ar9170 *ar) +{ + usb_unpoison_anchored_urbs(&ar->tx_anch); + + carl9170_set_state_when(ar, CARL9170_STOPPED, CARL9170_IDLE); + return 0; +} + +static int carl9170_usb_load_firmware(struct ar9170 *ar) +{ + const u8 *data; + u8 *buf; + unsigned int transfer; + size_t len; + u32 addr; + int err = 0; + + buf = kmalloc(4096, GFP_KERNEL); + if (!buf) { + err = -ENOMEM; + goto err_out; + } + + data = ar->fw.fw->data; + len = ar->fw.fw->size; + addr = ar->fw.address; + + /* this removes the miniboot image */ + data += ar->fw.offset; + len -= ar->fw.offset; + + while (len) { + transfer = min_t(unsigned int, len, 4096u); + memcpy(buf, data, transfer); + + err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), + 0x30 /* FW DL */, 0x40 | USB_DIR_OUT, + addr >> 8, 0, buf, transfer, 100); + + if (err < 0) { + kfree(buf); + goto err_out; + } + + len -= transfer; + data += transfer; + addr += transfer; + } + kfree(buf); + + err = usb_control_msg(ar->udev, usb_sndctrlpipe(ar->udev, 0), + 0x31 /* FW DL COMPLETE */, + 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 200); + + if (wait_for_completion_timeout(&ar->fw_boot_wait, HZ) == 0) { + err = -ETIMEDOUT; + goto err_out; + } + + err = carl9170_echo_test(ar, 0x4a110123); + if (err) + goto err_out; + + /* firmware restarts cmd counter */ + ar->cmd_seq = -1; + + return 0; + +err_out: + dev_err(&ar->udev->dev, "firmware upload failed (%d).\n", err); + return err; +} + +int carl9170_usb_restart(struct ar9170 *ar) +{ + int err = 0; + + if (ar->intf->condition != USB_INTERFACE_BOUND) + return 0; + + /* Disable command response sequence counter. */ + ar->cmd_seq = -2; + + err = carl9170_reboot(ar); + + carl9170_usb_stop(ar); + + if (err) + goto err_out; + + tasklet_schedule(&ar->usb_tasklet); + + /* The reboot procedure can take quite a while to complete. */ + msleep(1100); + + err = carl9170_usb_open(ar); + if (err) + goto err_out; + + err = carl9170_usb_load_firmware(ar); + if (err) + goto err_out; + + return 0; + +err_out: + carl9170_usb_cancel_urbs(ar); + return err; +} + +void carl9170_usb_reset(struct ar9170 *ar) +{ + /* + * This is the last resort to get the device going again + * without any *user replugging action*. + * + * But there is a catch: usb_reset really is like a physical + * *reconnect*. The mac80211 state will be lost in the process. + * Therefore a userspace application, which is monitoring + * the link must step in. + */ + carl9170_usb_cancel_urbs(ar); + + carl9170_usb_stop(ar); + + usb_queue_reset_device(ar->intf); +} + +static int carl9170_usb_init_device(struct ar9170 *ar) +{ + int err; + + err = carl9170_usb_send_rx_irq_urb(ar); + if (err) + goto err_out; + + err = carl9170_usb_init_rx_bulk_urbs(ar); + if (err) + goto err_unrx; + + mutex_lock(&ar->mutex); + err = carl9170_usb_load_firmware(ar); + mutex_unlock(&ar->mutex); + if (err) + goto err_unrx; + + return 0; + +err_unrx: + carl9170_usb_cancel_urbs(ar); + +err_out: + return err; +} + +static void carl9170_usb_firmware_failed(struct ar9170 *ar) +{ + struct device *parent = ar->udev->dev.parent; + struct usb_device *udev; + + /* + * Store a copy of the usb_device pointer locally. + * This is because device_release_driver initiates + * carl9170_usb_disconnect, which in turn frees our + * driver context (ar). + */ + udev = ar->udev; + + complete(&ar->fw_load_wait); + + /* unbind anything failed */ + if (parent) + device_lock(parent); + + device_release_driver(&udev->dev); + if (parent) + device_unlock(parent); + + usb_put_dev(udev); +} + +static void carl9170_usb_firmware_finish(struct ar9170 *ar) +{ + int err; + + err = carl9170_parse_firmware(ar); + if (err) + goto err_freefw; + + err = carl9170_usb_init_device(ar); + if (err) + goto err_freefw; + + err = carl9170_usb_open(ar); + if (err) + goto err_unrx; + + err = carl9170_register(ar); + + carl9170_usb_stop(ar); + if (err) + goto err_unrx; + + complete(&ar->fw_load_wait); + usb_put_dev(ar->udev); + return; + +err_unrx: + carl9170_usb_cancel_urbs(ar); + +err_freefw: + carl9170_release_firmware(ar); + carl9170_usb_firmware_failed(ar); +} + +static void carl9170_usb_firmware_step2(const struct firmware *fw, + void *context) +{ + struct ar9170 *ar = context; + + if (fw) { + ar->fw.fw = fw; + carl9170_usb_firmware_finish(ar); + return; + } + + dev_err(&ar->udev->dev, "firmware not found.\n"); + carl9170_usb_firmware_failed(ar); +} + +static int carl9170_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct ar9170 *ar; + struct usb_device *udev; + int err; + + err = usb_reset_device(interface_to_usbdev(intf)); + if (err) + return err; + + ar = carl9170_alloc(sizeof(*ar)); + if (IS_ERR(ar)) + return PTR_ERR(ar); + + udev = interface_to_usbdev(intf); + usb_get_dev(udev); + ar->udev = udev; + ar->intf = intf; + ar->features = id->driver_info; + + usb_set_intfdata(intf, ar); + SET_IEEE80211_DEV(ar->hw, &intf->dev); + + init_usb_anchor(&ar->rx_anch); + init_usb_anchor(&ar->rx_pool); + init_usb_anchor(&ar->rx_work); + init_usb_anchor(&ar->tx_wait); + init_usb_anchor(&ar->tx_anch); + init_usb_anchor(&ar->tx_cmd); + init_usb_anchor(&ar->tx_err); + init_completion(&ar->cmd_wait); + init_completion(&ar->fw_boot_wait); + init_completion(&ar->fw_load_wait); + tasklet_init(&ar->usb_tasklet, carl9170_usb_tasklet, + (unsigned long)ar); + + atomic_set(&ar->tx_cmd_urbs, 0); + atomic_set(&ar->tx_anch_urbs, 0); + atomic_set(&ar->rx_work_urbs, 0); + atomic_set(&ar->rx_anch_urbs, 0); + atomic_set(&ar->rx_pool_urbs, 0); + ar->cmd_seq = -2; + + usb_get_dev(ar->udev); + + carl9170_set_state(ar, CARL9170_STOPPED); + + return request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME, + &ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2); +} + +static void carl9170_usb_disconnect(struct usb_interface *intf) +{ + struct ar9170 *ar = usb_get_intfdata(intf); + struct usb_device *udev; + + if (WARN_ON(!ar)) + return; + + udev = ar->udev; + wait_for_completion(&ar->fw_load_wait); + + if (IS_INITIALIZED(ar)) { + carl9170_reboot(ar); + carl9170_usb_stop(ar); + } + + carl9170_usb_cancel_urbs(ar); + carl9170_unregister(ar); + + usb_set_intfdata(intf, NULL); + + carl9170_release_firmware(ar); + carl9170_free(ar); + usb_put_dev(udev); +} + +#ifdef CONFIG_PM +static int carl9170_usb_suspend(struct usb_interface *intf, + pm_message_t message) +{ + struct ar9170 *ar = usb_get_intfdata(intf); + + if (!ar) + return -ENODEV; + + carl9170_usb_cancel_urbs(ar); + + /* + * firmware automatically reboots for usb suspend. + */ + + return 0; +} + +static int carl9170_usb_resume(struct usb_interface *intf) +{ + struct ar9170 *ar = usb_get_intfdata(intf); + int err; + + if (!ar) + return -ENODEV; + + usb_unpoison_anchored_urbs(&ar->rx_anch); + + err = carl9170_usb_init_device(ar); + if (err) + goto err_unrx; + + err = carl9170_usb_open(ar); + if (err) + goto err_unrx; + + return 0; + +err_unrx: + carl9170_usb_cancel_urbs(ar); + + return err; +} +#endif /* CONFIG_PM */ + +static struct usb_driver carl9170_driver = { + .name = KBUILD_MODNAME, + .probe = carl9170_usb_probe, + .disconnect = carl9170_usb_disconnect, + .id_table = carl9170_usb_ids, + .soft_unbind = 1, +#ifdef CONFIG_PM + .suspend = carl9170_usb_suspend, + .resume = carl9170_usb_resume, +#endif /* CONFIG_PM */ +}; + +static int __init carl9170_usb_init(void) +{ + return usb_register(&carl9170_driver); +} + +static void __exit carl9170_usb_exit(void) +{ + usb_deregister(&carl9170_driver); +} + +module_init(carl9170_usb_init); +module_exit(carl9170_usb_exit); |
