diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/hw.c')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/hw.c | 185 |
1 files changed, 21 insertions, 164 deletions
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ee7759575050..8c840cad3ac2 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -23,6 +23,7 @@ #include "hw-ops.h" #include "rc.h" #include "ar9003_mac.h" +#include "ar9003_mci.h" static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type); @@ -1037,13 +1038,16 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) /* * Workaround for early ACK timeouts, add an offset to match the - * initval's 64us ack timeout value. + * initval's 64us ack timeout value. Use 48us for the CTS timeout. * This was initially only meant to work around an issue with delayed * BA frames in some implementations, but it has been found to fix ACK * timeout issues in other cases as well. */ - if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) + if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) { acktimeout += 64 - sifstime - ah->slottime; + ctstimeout += 48 - sifstime - ah->slottime; + } + ath9k_hw_set_sifs_time(ah, sifstime); ath9k_hw_setslottime(ah, slottime); @@ -1515,61 +1519,22 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, struct ath9k_hw_cal_data *caldata, bool bChannelChange) { struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci; u32 saveLedState; struct ath9k_channel *curchan = ah->curchan; u32 saveDefAntenna; u32 macStaId1; u64 tsf = 0; int i, r; - bool allow_fbs = false; + bool allow_fbs = false, start_mci_reset = false; bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI); bool save_fullsleep = ah->chip_fullsleep; if (mci) { - - ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan)); - - if (mci_hw->bt_state == MCI_BT_CAL_START) { - u32 payload[4] = {0, 0, 0, 0}; - - ath_dbg(common, MCI, "MCI stop rx for BT CAL\n"); - - mci_hw->bt_state = MCI_BT_CAL; - - /* - * MCI FIX: disable mci interrupt here. This is to avoid - * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and - * lead to mci_intr reentry. - */ - - ar9003_mci_disable_interrupt(ah); - - ath_dbg(common, MCI, "send WLAN_CAL_GRANT\n"); - MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT); - ar9003_mci_send_message(ah, MCI_GPM, 0, payload, - 16, true, false); - - ath_dbg(common, MCI, "\nMCI BT is calibrating\n"); - - /* Wait BT calibration to be completed for 25ms */ - - if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE, - 0, 25000)) - ath_dbg(common, MCI, - "MCI got BT_CAL_DONE\n"); - else - ath_dbg(common, MCI, - "MCI ### BT cal takes to long, force bt_state to be bt_awake\n"); - mci_hw->bt_state = MCI_BT_AWAKE; - /* MCI FIX: enable mci interrupt here */ - ar9003_mci_enable_interrupt(ah); - - return true; - } + start_mci_reset = ar9003_mci_start_reset(ah, chan); + if (start_mci_reset) + return 0; } - if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) return -EIO; @@ -1606,7 +1571,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ath9k_hw_channel_change(ah, chan)) { ath9k_hw_loadnf(ah, ah->curchan); ath9k_hw_start_nfcal(ah, true); - if (mci && mci_hw->ready) + if (mci && ar9003_mci_is_ready(ah)) ar9003_mci_2g5g_switch(ah, true); if (AR_SREV_9271(ah)) @@ -1615,19 +1580,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, } } - if (mci) { - ar9003_mci_disable_interrupt(ah); - - if (mci_hw->ready && !save_fullsleep) { - ar9003_mci_mute_bt(ah); - udelay(20); - REG_WRITE(ah, AR_BTCOEX_CTRL, 0); - } - - mci_hw->bt_state = MCI_BT_SLEEP; - mci_hw->ready = false; - } - + if (mci) + ar9003_mci_stop_bt(ah, save_fullsleep); saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA); if (saveDefAntenna == 0) @@ -1804,53 +1758,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_loadnf(ah, chan); ath9k_hw_start_nfcal(ah, true); - if (mci && mci_hw->ready) { - - if (IS_CHAN_2GHZ(chan) && - (mci_hw->bt_state == MCI_BT_SLEEP)) { - - if (ar9003_mci_check_int(ah, - AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) || - ar9003_mci_check_int(ah, - AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) { - - /* - * BT is sleeping. Check if BT wakes up during - * WLAN calibration. If BT wakes up during - * WLAN calibration, need to go through all - * message exchanges again and recal. - */ - - ath_dbg(common, MCI, - "MCI BT wakes up during WLAN calibration\n"); - - REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW, - AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET | - AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE); - ath_dbg(common, MCI, "MCI send REMOTE_RESET\n"); - ar9003_mci_remote_reset(ah, true); - ar9003_mci_send_sys_waking(ah, true); - udelay(1); - if (IS_CHAN_2GHZ(chan)) - ar9003_mci_send_lna_transfer(ah, true); - - mci_hw->bt_state = MCI_BT_AWAKE; - - ath_dbg(common, MCI, "MCI re-cal\n"); - - if (caldata) { - caldata->done_txiqcal_once = false; - caldata->done_txclcal_once = false; - caldata->rtt_hist.num_readings = 0; - } - - if (!ath9k_hw_init_cal(ah, chan)) - return -EIO; - - } - } - ar9003_mci_enable_interrupt(ah); - } + if (mci && ar9003_mci_end_reset(ah, chan, caldata)) + return -EIO; ENABLE_REGWRITE_BUFFER(ah); @@ -1891,24 +1800,11 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, #endif } - if (ah->btcoex_hw.enabled && - ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) + if (ath9k_hw_btcoex_is_enabled(ah)) ath9k_hw_btcoex_enable(ah); - if (mci && mci_hw->ready) { - /* - * check BT state again to make - * sure it's not changed. - */ - - ar9003_mci_sync_bt_state(ah); - ar9003_mci_2g5g_switch(ah, true); - - if ((mci_hw->bt_state == MCI_BT_AWAKE) && - (mci_hw->query_bt == true)) { - mci_hw->need_flush_btinfo = true; - } - } + if (mci) + ar9003_mci_check_bt(ah); if (AR_SREV_9300_20_OR_LATER(ah)) { ar9003_hw_bb_watchdog_config(ah); @@ -1959,8 +1855,7 @@ static void ath9k_set_power_sleep(struct ath_hw *ah, int setChip) REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF); /* Shutdown chip. Active low */ - if (!AR_SREV_5416(ah) && - !AR_SREV_9271(ah) && !AR_SREV_9462_10(ah)) { + if (!AR_SREV_5416(ah) && !AR_SREV_9271(ah)) { REG_CLR_BIT(ah, AR_RTC_RESET, AR_RTC_RESET_EN); udelay(2); } @@ -2074,7 +1969,6 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip) bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode) { struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci; int status = true, setChip = true; static const char *modes[] = { "AWAKE", @@ -2098,20 +1992,8 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode) break; case ATH9K_PM_FULL_SLEEP: - - if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) { - if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) && - (mci->bt_state != MCI_BT_SLEEP) && - !mci->halted_bt_gpm) { - ath_dbg(common, MCI, - "MCI halt BT GPM (full_sleep)\n"); - ar9003_mci_send_coex_halt_bt_gpm(ah, - true, true); - } - - mci->ready = false; - REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2); - } + if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) + ar9003_mci_set_full_sleep(ah); ath9k_set_power_sleep(ah, setChip); ah->chip_fullsleep = true; @@ -2301,7 +2183,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) struct ath9k_hw_capabilities *pCap = &ah->caps; struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah); struct ath_common *common = ath9k_hw_common(ah); - struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw; unsigned int chip_chainmask; u16 eeval; @@ -2420,30 +2301,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) else pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS; - if (common->btcoex_enabled) { - if (AR_SREV_9462(ah)) - btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI; - else if (AR_SREV_9300_20_OR_LATER(ah)) { - btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE; - btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300; - btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300; - btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO_9300; - } else if (AR_SREV_9280_20_OR_LATER(ah)) { - btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9280; - btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9280; - - if (AR_SREV_9285(ah)) { - btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE; - btcoex_hw->btpriority_gpio = - ATH_BTPRIORITY_GPIO_9285; - } else { - btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE; - } - } - } else { - btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE; - } - if (AR_SREV_9300_20_OR_LATER(ah)) { pCap->hw_caps |= ATH9K_HW_CAP_EDMA | ATH9K_HW_CAP_FASTCLOCK; if (!AR_SREV_9330(ah) && !AR_SREV_9485(ah)) |