summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath5k/reg.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/reg.h')
-rw-r--r--drivers/net/wireless/ath/ath5k/reg.h89
1 files changed, 45 insertions, 44 deletions
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index d12b827033c1..f5c1000045d3 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -72,7 +72,7 @@
#define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */
#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */
#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */
-#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */
+#define AR5K_CFG_IBSS 0x00000020 /* 0-BSS, 1-IBSS [5211+] */
#define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */
#define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */
#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */
@@ -170,7 +170,7 @@
#define AR5K_TXCFG_SDMAMR_S 0
#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */
#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */
-#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */
+#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Trigger level mask */
#define AR5K_TXCFG_TXFULL_S 4
#define AR5K_TXCFG_TXFULL_0B 0x00000000
#define AR5K_TXCFG_TXFULL_64B 0x00000010
@@ -283,16 +283,16 @@
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
-#define AR5K_ISR_RXOK 0x00000001 /* Frame successfuly received */
+#define AR5K_ISR_RXOK 0x00000001 /* Frame successfully received */
#define AR5K_ISR_RXDESC 0x00000002 /* RX descriptor request */
#define AR5K_ISR_RXERR 0x00000004 /* Receive error */
#define AR5K_ISR_RXNOFRM 0x00000008 /* No frame received (receive timeout) */
#define AR5K_ISR_RXEOL 0x00000010 /* Empty RX descriptor */
#define AR5K_ISR_RXORN 0x00000020 /* Receive FIFO overrun */
-#define AR5K_ISR_TXOK 0x00000040 /* Frame successfuly transmited */
+#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
-#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout) */
+#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
@@ -303,7 +303,7 @@
#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
-#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
+#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
@@ -377,16 +377,16 @@
*/
#define AR5K_IMR 0x0020 /* Register Address [5210] */
#define AR5K_PIMR 0x00a0 /* Register Address [5211+] */
-#define AR5K_IMR_RXOK 0x00000001 /* Frame successfuly received*/
+#define AR5K_IMR_RXOK 0x00000001 /* Frame successfully received*/
#define AR5K_IMR_RXDESC 0x00000002 /* RX descriptor request*/
#define AR5K_IMR_RXERR 0x00000004 /* Receive error*/
#define AR5K_IMR_RXNOFRM 0x00000008 /* No frame received (receive timeout)*/
#define AR5K_IMR_RXEOL 0x00000010 /* Empty RX descriptor*/
#define AR5K_IMR_RXORN 0x00000020 /* Receive FIFO overrun*/
-#define AR5K_IMR_TXOK 0x00000040 /* Frame successfuly transmited*/
+#define AR5K_IMR_TXOK 0x00000040 /* Frame successfully transmitted*/
#define AR5K_IMR_TXDESC 0x00000080 /* TX descriptor request*/
#define AR5K_IMR_TXERR 0x00000100 /* Transmit error*/
-#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmited (transmit timeout)*/
+#define AR5K_IMR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)*/
#define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/
#define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/
#define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/
@@ -397,7 +397,7 @@
#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
-#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
+#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
@@ -601,7 +601,7 @@
* QCU misc registers
*/
#define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */
-#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
+#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame scheduling mask */
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
@@ -653,13 +653,13 @@
* registers [5211+]
*
* These registers control the various characteristics of each queue
- * for 802.11e (WME) combatibility so they go together with
+ * for 802.11e (WME) compatibility so they go together with
* QCU registers in pairs. For each queue we have a QCU mask register,
* (0x1000 - 0x102c), a local-IFS settings register (0x1040 - 0x106c),
* a retry limit register (0x1080 - 0x10ac), a channel time register
* (0x10c0 - 0x10ec), a misc-settings register (0x1100 - 0x112c) and
* a sequence number register (0x1140 - 0x116c). It seems that "global"
- * registers here afect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
+ * registers here affect all queues (see use of DCU_GBL_IFS_SLOT in ar5k).
* We use the same macros here for easier register access.
*
*/
@@ -779,7 +779,7 @@
* and it's used for generating pseudo-random
* number sequences.
*
- * (If i understand corectly, random numbers are
+ * (If i understand correctly, random numbers are
* used for idle sensing -multiplied with cwmin/max etc-)
*/
#define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */
@@ -1007,7 +1007,7 @@
#define AR5K_PCIE_WAEN 0x407c
/*
- * PCI-E Serializer/Desirializer
+ * PCI-E Serializer/Deserializer
* registers
*/
#define AR5K_PCIE_SERDES 0x4080
@@ -1227,7 +1227,7 @@
AR5K_USEC_5210 : AR5K_USEC_5211)
#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */
#define AR5K_USEC_1_S 0
-#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */
+#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32MHz clock */
#define AR5K_USEC_32_S 7
#define AR5K_USEC_TX_LATENCY_5211 0x007fc000
#define AR5K_USEC_TX_LATENCY_5211_S 14
@@ -1328,16 +1328,16 @@
#define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */
#define AR5K_RX_FILTER (ah->ah_version == AR5K_AR5210 ? \
AR5K_RX_FILTER_5210 : AR5K_RX_FILTER_5211)
-#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */
-#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */
-#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */
-#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */
-#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */
-#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */
-#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */
+#define AR5K_RX_FILTER_UCAST 0x00000001 /* Don't filter unicast frames */
+#define AR5K_RX_FILTER_MCAST 0x00000002 /* Don't filter multicast frames */
+#define AR5K_RX_FILTER_BCAST 0x00000004 /* Don't filter broadcast frames */
+#define AR5K_RX_FILTER_CONTROL 0x00000008 /* Don't filter control frames */
+#define AR5K_RX_FILTER_BEACON 0x00000010 /* Don't filter beacon frames */
+#define AR5K_RX_FILTER_PROM 0x00000020 /* Set promiscuous mode */
+#define AR5K_RX_FILTER_XRPOLL 0x00000040 /* Don't filter XR poll frame [5212+] */
#define AR5K_RX_FILTER_PROBEREQ 0x00000080 /* Don't filter probe requests [5212+] */
#define AR5K_RX_FILTER_PHYERR_5212 0x00000100 /* Don't filter phy errors [5212+] */
-#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */
+#define AR5K_RX_FILTER_RADARERR_5212 0x00000200 /* Don't filter phy radar errors [5212+] */
#define AR5K_RX_FILTER_PHYERR_5211 0x00000040 /* [5211] */
#define AR5K_RX_FILTER_RADARERR_5211 0x00000080 /* [5211] */
#define AR5K_RX_FILTER_PHYERR \
@@ -1461,7 +1461,7 @@
* ADDAC test register [5211+]
*/
#define AR5K_ADDAC_TEST 0x8054 /* Register Address */
-#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */
+#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */
#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */
#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */
#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */
@@ -1632,7 +1632,7 @@
#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */
#define AR5K_SLEEP0_NEXT_DTIM_S 0
#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */
-#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */
+#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enhanced sleep control */
#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */
#define AR5K_SLEEP0_CABTO_S 24
@@ -1657,7 +1657,7 @@
/*
* TX power control (TPC) register
*
- * XXX: PCDAC steps (0.5dbm) or DBM ?
+ * XXX: PCDAC steps (0.5dBm) or dBm ?
*
*/
#define AR5K_TXPC 0x80e8 /* Register Address */
@@ -1673,7 +1673,7 @@
/*
* Profile count registers
*
- * These registers can be cleared and freezed with ATH5K_MIBC, but they do not
+ * These registers can be cleared and frozen with ATH5K_MIBC, but they do not
* generate a MIB interrupt.
* Instead of overflowing, they shift by one bit to the right. All registers
* shift together, i.e. when one reaches the max, all shift at the same time by
@@ -1838,7 +1838,7 @@
#define AR5K_PHY_TST2_TRIG_SEL 0x00000007 /* Trigger select (?)*/
#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) */
#define AR5K_PHY_TST2_CBUS_MODE 0x00000060 /* Cardbus mode (?) */
-#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */
+#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32kHz external) */
#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */
#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */
#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */
@@ -2002,7 +2002,7 @@
#define AR5K_PHY_AGCCTL_OFDM_DIV_DIS 0x00000008 /* Disable antenna diversity on OFDM modes */
#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
#define AR5K_PHY_AGCTL_FLTR_CAL 0x00010000 /* Allow filter calibration (?) */
-#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automatically */
/*
* PHY noise floor status register (CCA = Clear Channel Assessment)
@@ -2038,7 +2038,7 @@
#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24
/* Low thresholds */
-#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c
+#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c
#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00
#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8
@@ -2089,7 +2089,7 @@
*
* It's obvious from the code that 0x989c is the buffer register but
* for the other special registers that we write to after sending each
- * packet, i have no idea. So i'll name them BUFFER_CONTROL_X registers
+ * packet, i have no idea. So I'll name them BUFFER_CONTROL_X registers
* for now. It's interesting that they are also used for some other operations.
*/
@@ -2259,12 +2259,13 @@
#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */
#define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000
#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */
-#define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
- AR5K_PHY_FRAME_CTL_TXURN_ERR | \
- AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
- AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
- AR5K_PHY_FRAME_CTL_PARITY_ERR | \
- AR5K_PHY_FRAME_CTL_TIMING_ERR
+#define AR5K_PHY_FRAME_CTL_INI \
+ (AR5K_PHY_FRAME_CTL_SERVICE_ERR | \
+ AR5K_PHY_FRAME_CTL_TXURN_ERR | \
+ AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \
+ AR5K_PHY_FRAME_CTL_ILLRATE_ERR | \
+ AR5K_PHY_FRAME_CTL_PARITY_ERR | \
+ AR5K_PHY_FRAME_CTL_TIMING_ERR)
/*
* PHY Tx Power adjustment register [5212A+]
@@ -2281,22 +2282,22 @@
#define AR5K_PHY_RADAR 0x9954
#define AR5K_PHY_RADAR_ENABLE 0x00000001
#define AR5K_PHY_RADAR_DISABLE 0x00000000
-#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
+#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
5-bits, units unknown {0..31}
(? MHz ?) */
#define AR5K_PHY_RADAR_INBANDTHR_S 1
-#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
+#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
6-bits, dBm range {0..63}
in dBm units. */
#define AR5K_PHY_RADAR_PRSSI_THR_S 6
-#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
+#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
6-bits, dBm range {0..63}
in dBm units. */
#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
-#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
+#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
6-bits, dBm range {0..63}
in dBm units. */
#define AR5K_PHY_RADAR_RSSI_THR_S 18
@@ -2339,7 +2340,7 @@
#define AR5K_PHY_RESTART_DIV_GC_S 18
/*
- * RF Bus access request register (for synth-oly channel switching)
+ * RF Bus access request register (for synth-only channel switching)
*/
#define AR5K_PHY_RFBUS_REQ 0x997C
#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
@@ -2381,7 +2382,7 @@
*/
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
-#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */
+#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplifier Gain table base address */
#define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2))
/*
OpenPOWER on IntegriCloud