summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/ath10k/hw.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/hw.h')
-rw-r--r--drivers/net/wireless/ath/ath10k/hw.h79
1 files changed, 65 insertions, 14 deletions
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 44ed5af0a204..8aeb46d9b534 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -20,28 +20,37 @@
#include "targaddrs.h"
-/* Supported FW version */
-#define SUPPORTED_FW_MAJOR 1
-#define SUPPORTED_FW_MINOR 0
-#define SUPPORTED_FW_RELEASE 0
-#define SUPPORTED_FW_BUILD 629
-
-/* QCA988X 1.0 definitions */
-#define QCA988X_HW_1_0_VERSION 0x4000002c
-#define QCA988X_HW_1_0_FW_DIR "ath10k/QCA988X/hw1.0"
-#define QCA988X_HW_1_0_FW_FILE "firmware.bin"
-#define QCA988X_HW_1_0_OTP_FILE "otp.bin"
-#define QCA988X_HW_1_0_BOARD_DATA_FILE "board.bin"
-#define QCA988X_HW_1_0_PATCH_LOAD_ADDR 0x1234
+/* QCA988X 1.0 definitions (unsupported) */
+#define QCA988X_HW_1_0_CHIP_ID_REV 0x0
/* QCA988X 2.0 definitions */
#define QCA988X_HW_2_0_VERSION 0x4100016c
+#define QCA988X_HW_2_0_CHIP_ID_REV 0x2
#define QCA988X_HW_2_0_FW_DIR "ath10k/QCA988X/hw2.0"
#define QCA988X_HW_2_0_FW_FILE "firmware.bin"
#define QCA988X_HW_2_0_OTP_FILE "otp.bin"
#define QCA988X_HW_2_0_BOARD_DATA_FILE "board.bin"
#define QCA988X_HW_2_0_PATCH_LOAD_ADDR 0x1234
+#define ATH10K_FW_API2_FILE "firmware-2.bin"
+
+/* includes also the null byte */
+#define ATH10K_FIRMWARE_MAGIC "QCA-ATH10K"
+
+struct ath10k_fw_ie {
+ __le32 id;
+ __le32 len;
+ u8 data[0];
+};
+
+enum ath10k_fw_ie_type {
+ ATH10K_FW_IE_FW_VERSION = 0,
+ ATH10K_FW_IE_TIMESTAMP = 1,
+ ATH10K_FW_IE_FEATURES = 2,
+ ATH10K_FW_IE_FW_IMAGE = 3,
+ ATH10K_FW_IE_OTP_IMAGE = 4,
+};
+
/* Known pecularities:
* - current FW doesn't support raw rx mode (last tested v599)
* - current FW dumps upon raw tx mode (last tested v599)
@@ -53,6 +62,9 @@ enum ath10k_hw_txrx_mode {
ATH10K_HW_TXRX_RAW = 0,
ATH10K_HW_TXRX_NATIVE_WIFI = 1,
ATH10K_HW_TXRX_ETHERNET = 2,
+
+ /* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */
+ ATH10K_HW_TXRX_MGMT = 3,
};
enum ath10k_mcast2ucast_mode {
@@ -60,6 +72,7 @@ enum ath10k_mcast2ucast_mode {
ATH10K_MCAST2UCAST_ENABLED = 1,
};
+/* Target specific defines for MAIN firmware */
#define TARGET_NUM_VDEVS 8
#define TARGET_NUM_PEER_AST 2
#define TARGET_NUM_WDS_ENTRIES 32
@@ -75,7 +88,11 @@ enum ath10k_mcast2ucast_mode {
#define TARGET_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
#define TARGET_RX_TIMEOUT_LO_PRI 100
#define TARGET_RX_TIMEOUT_HI_PRI 40
-#define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_ETHERNET
+
+/* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and
+ * avoid a very expensive re-alignment in mac80211. */
+#define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI
+
#define TARGET_SCAN_MAX_PENDING_REQS 4
#define TARGET_BMISS_OFFLOAD_MAX_VDEV 3
#define TARGET_ROAM_OFFLOAD_MAX_VDEV 3
@@ -90,6 +107,36 @@ enum ath10k_mcast2ucast_mode {
#define TARGET_NUM_MSDU_DESC (1024 + 400)
#define TARGET_MAX_FRAG_ENTRIES 0
+/* Target specific defines for 10.X firmware */
+#define TARGET_10X_NUM_VDEVS 16
+#define TARGET_10X_NUM_PEER_AST 2
+#define TARGET_10X_NUM_WDS_ENTRIES 32
+#define TARGET_10X_DMA_BURST_SIZE 0
+#define TARGET_10X_MAC_AGGR_DELIM 0
+#define TARGET_10X_AST_SKID_LIMIT 16
+#define TARGET_10X_NUM_PEERS (128 + (TARGET_10X_NUM_VDEVS))
+#define TARGET_10X_NUM_OFFLOAD_PEERS 0
+#define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS 0
+#define TARGET_10X_NUM_PEER_KEYS 2
+#define TARGET_10X_NUM_TIDS 256
+#define TARGET_10X_TX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_10X_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2))
+#define TARGET_10X_RX_TIMEOUT_LO_PRI 100
+#define TARGET_10X_RX_TIMEOUT_HI_PRI 40
+#define TARGET_10X_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI
+#define TARGET_10X_SCAN_MAX_PENDING_REQS 4
+#define TARGET_10X_BMISS_OFFLOAD_MAX_VDEV 2
+#define TARGET_10X_ROAM_OFFLOAD_MAX_VDEV 2
+#define TARGET_10X_ROAM_OFFLOAD_MAX_AP_PROFILES 8
+#define TARGET_10X_GTK_OFFLOAD_MAX_VDEV 3
+#define TARGET_10X_NUM_MCAST_GROUPS 0
+#define TARGET_10X_NUM_MCAST_TABLE_ELEMS 0
+#define TARGET_10X_MCAST2UCAST_MODE ATH10K_MCAST2UCAST_DISABLED
+#define TARGET_10X_TX_DBG_LOG_SIZE 1024
+#define TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK 1
+#define TARGET_10X_VOW_CONFIG 0
+#define TARGET_10X_NUM_MSDU_DESC (1024 + 400)
+#define TARGET_10X_MAX_FRAG_ENTRIES 0
/* Number of Copy Engines supported */
#define CE_COUNT 8
@@ -169,6 +216,10 @@ enum ath10k_mcast2ucast_mode {
#define SOC_LPO_CAL_ENABLE_LSB 20
#define SOC_LPO_CAL_ENABLE_MASK 0x00100000
+#define SOC_CHIP_ID_ADDRESS 0x000000ec
+#define SOC_CHIP_ID_REV_LSB 8
+#define SOC_CHIP_ID_REV_MASK 0x00000f00
+
#define WLAN_RESET_CONTROL_COLD_RST_MASK 0x00000008
#define WLAN_RESET_CONTROL_WARM_RST_MASK 0x00000004
#define WLAN_SYSTEM_SLEEP_DISABLE_LSB 0
OpenPOWER on IntegriCloud