summaryrefslogtreecommitdiffstats
path: root/drivers/net/via-velocity.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/via-velocity.c')
-rw-r--r--drivers/net/via-velocity.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 317aa34b21cf..3a486f3bad3d 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -361,7 +361,7 @@ static struct velocity_info_tbl chip_info_table[] = {
* Describe the PCI device identifiers that we support in this
* device driver. Used for hotplug autoloading.
*/
-static const struct pci_device_id velocity_id_table[] __devinitdata = {
+static DEFINE_PCI_DEVICE_TABLE(velocity_id_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
{ }
};
@@ -1132,7 +1132,7 @@ static void velocity_set_multi(struct net_device *dev)
writel(0xffffffff, &regs->MARCAM[0]);
writel(0xffffffff, &regs->MARCAM[4]);
rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
- } else if ((dev->mc_count > vptr->multicast_limit) ||
+ } else if ((netdev_mc_count(dev) > vptr->multicast_limit) ||
(dev->flags & IFF_ALLMULTI)) {
writel(0xffffffff, &regs->MARCAM[0]);
writel(0xffffffff, &regs->MARCAM[4]);
@@ -1141,9 +1141,11 @@ static void velocity_set_multi(struct net_device *dev)
int offset = MCAM_SIZE - vptr->multicast_limit;
mac_get_cam_mask(regs, vptr->mCAMmask);
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ i = 0;
+ netdev_for_each_mc_addr(mclist, dev) {
mac_set_cam(regs, i + offset, mclist->dmi_addr);
vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+ i++;
}
mac_set_cam_mask(regs, vptr->mCAMmask);
@@ -2698,10 +2700,8 @@ static void __devinit velocity_print_info(struct velocity_info *vptr)
struct net_device *dev = vptr->dev;
printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
- printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
- dev->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ printk(KERN_INFO "%s: Ethernet Address: %pM\n",
+ dev->name, dev->dev_addr);
}
static u32 velocity_get_link(struct net_device *dev)
@@ -2825,7 +2825,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
- NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
+ NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM | NETIF_F_SG;
ret = register_netdev(dev);
if (ret < 0)
OpenPOWER on IntegriCloud