summaryrefslogtreecommitdiffstats
path: root/drivers/net/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb')
-rw-r--r--drivers/net/usb/asix_common.c8
-rw-r--r--drivers/net/usb/ax88179_178a.c17
-rw-r--r--drivers/net/usb/kalmia.c2
-rw-r--r--drivers/net/usb/qmi_wwan.c30
-rw-r--r--drivers/net/usb/r8152.c21
5 files changed, 62 insertions, 16 deletions
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
index f79eb12c326a..125cff57c759 100644
--- a/drivers/net/usb/asix_common.c
+++ b/drivers/net/usb/asix_common.c
@@ -433,13 +433,13 @@ int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
mutex_lock(&dev->phy_mutex);
do {
ret = asix_set_sw_mii(dev, 0);
- if (ret == -ENODEV)
+ if (ret == -ENODEV || ret == -ETIMEDOUT)
break;
usleep_range(1000, 1100);
ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
0, 0, 1, &smsr, 0);
} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
- if (ret == -ENODEV) {
+ if (ret == -ENODEV || ret == -ETIMEDOUT) {
mutex_unlock(&dev->phy_mutex);
return ret;
}
@@ -497,13 +497,13 @@ int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
mutex_lock(&dev->phy_mutex);
do {
ret = asix_set_sw_mii(dev, 1);
- if (ret == -ENODEV)
+ if (ret == -ENODEV || ret == -ETIMEDOUT)
break;
usleep_range(1000, 1100);
ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
0, 0, 1, &smsr, 1);
} while (!(smsr & AX_HOST_EN) && (i++ < 30) && (ret != -ENODEV));
- if (ret == -ENODEV) {
+ if (ret == -ENODEV || ret == -ETIMEDOUT) {
mutex_unlock(&dev->phy_mutex);
return ret;
}
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c16081a..8a6675d92b98 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = {
.tx_fixup = ax88179_tx_fixup,
};
+static const struct driver_info cypress_GX3_info = {
+ .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+ .bind = ax88179_bind,
+ .unbind = ax88179_unbind,
+ .status = ax88179_status,
+ .link_reset = ax88179_link_reset,
+ .reset = ax88179_reset,
+ .stop = ax88179_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+ .rx_fixup = ax88179_rx_fixup,
+ .tx_fixup = ax88179_tx_fixup,
+};
+
static const struct driver_info dlink_dub1312_info = {
.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@ static const struct usb_device_id products[] = {
USB_DEVICE(0x0b95, 0x178a),
.driver_info = (unsigned long)&ax88178a_info,
}, {
+ /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+ USB_DEVICE(0x04b4, 0x3610),
+ .driver_info = (unsigned long)&cypress_GX3_info,
+}, {
/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
USB_DEVICE(0x2001, 0x4a00),
.driver_info = (unsigned long)&dlink_dub1312_info,
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index 5662babf0583..3e37724d30ae 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -151,7 +151,7 @@ kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
- if (status < 0) {
+ if (status) {
usb_set_intfdata(intf, NULL);
usb_driver_release_interface(driver_of(intf), intf);
return status;
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 9d1fce8a6e84..3ff76c6db4f6 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -59,6 +59,10 @@ enum qmi_wwan_flags {
QMI_WWAN_FLAG_RAWIP = 1 << 0,
};
+enum qmi_wwan_quirks {
+ QMI_WWAN_QUIRK_DTR = 1 << 0, /* needs "set DTR" request */
+};
+
static void qmi_wwan_netdev_setup(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
@@ -411,9 +415,14 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
* clearing out state the clients might need.
*
* MDM9x30 is the first QMI chipset with USB3 support. Abuse
- * this fact to enable the quirk.
+ * this fact to enable the quirk for all USB3 devices.
+ *
+ * There are also chipsets with the same "set DTR" requirement
+ * but without USB3 support. Devices based on these chips
+ * need a quirk flag in the device ID table.
*/
- if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
+ if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR ||
+ le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
qmi_wwan_manage_power(dev, 1);
qmi_wwan_change_dtr(dev, true);
}
@@ -526,6 +535,16 @@ static const struct driver_info qmi_wwan_info = {
.rx_fixup = qmi_wwan_rx_fixup,
};
+static const struct driver_info qmi_wwan_info_quirk_dtr = {
+ .description = "WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind,
+ .unbind = qmi_wwan_unbind,
+ .manage_power = qmi_wwan_manage_power,
+ .rx_fixup = qmi_wwan_rx_fixup,
+ .data = QMI_WWAN_QUIRK_DTR,
+};
+
#define HUAWEI_VENDOR_ID 0x12D1
/* map QMI/wwan function by a fixed interface number */
@@ -533,6 +552,11 @@ static const struct driver_info qmi_wwan_info = {
USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
.driver_info = (unsigned long)&qmi_wwan_info
+/* devices requiring "set DTR" quirk */
+#define QMI_QUIRK_SET_DTR(vend, prod, num) \
+ USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
+ .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
+
/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
#define QMI_GOBI1K_DEVICE(vend, prod) \
QMI_FIXED_INTF(vend, prod, 3)
@@ -895,6 +919,8 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
{QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */
{QMI_FIXED_INTF(0x1e0e, 0x9001, 5)}, /* SIMCom 7230E */
+ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */
+ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 44d439f50961..efb84f092492 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1730,7 +1730,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
u8 checksum = CHECKSUM_NONE;
u32 opts2, opts3;
- if (tp->version == RTL_VER_01)
+ if (tp->version == RTL_VER_01 || tp->version == RTL_VER_02)
goto return_result;
opts2 = le32_to_cpu(rx_desc->opts2);
@@ -1745,7 +1745,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
checksum = CHECKSUM_NONE;
else
checksum = CHECKSUM_UNNECESSARY;
- } else if (RD_IPV6_CS) {
+ } else if (opts2 & RD_IPV6_CS) {
if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
checksum = CHECKSUM_UNNECESSARY;
else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
@@ -3266,10 +3266,8 @@ static int rtl8152_open(struct net_device *netdev)
goto out;
res = usb_autopm_get_interface(tp->intf);
- if (res < 0) {
- free_all_mem(tp);
- goto out;
- }
+ if (res < 0)
+ goto out_free;
mutex_lock(&tp->control);
@@ -3285,10 +3283,9 @@ static int rtl8152_open(struct net_device *netdev)
netif_device_detach(tp->netdev);
netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
res);
- free_all_mem(tp);
- } else {
- napi_enable(&tp->napi);
+ goto out_unlock;
}
+ napi_enable(&tp->napi);
mutex_unlock(&tp->control);
@@ -3297,7 +3294,13 @@ static int rtl8152_open(struct net_device *netdev)
tp->pm_notifier.notifier_call = rtl_notifier;
register_pm_notifier(&tp->pm_notifier);
#endif
+ return 0;
+out_unlock:
+ mutex_unlock(&tp->control);
+ usb_autopm_put_interface(tp->intf);
+out_free:
+ free_all_mem(tp);
out:
return res;
}
OpenPOWER on IntegriCloud