summaryrefslogtreecommitdiffstats
path: root/drivers/net/tg3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tg3.c')
-rw-r--r--drivers/net/tg3.c143
1 files changed, 139 insertions, 4 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 9cd8613625f8..d4035de6440e 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -3655,11 +3655,139 @@ static void tg3_set_txd(struct tg3 *tp, int entry,
txd->vlan_tag = vlan_tag << TXD_VLAN_TAG_SHIFT;
}
+/* hard_start_xmit for devices that don't have any bugs and
+ * support TG3_FLG2_HW_TSO_2 only.
+ */
static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct tg3 *tp = netdev_priv(dev);
dma_addr_t mapping;
u32 len, entry, base_flags, mss;
+
+ len = skb_headlen(skb);
+
+ /* No BH disabling for tx_lock here. We are running in BH disabled
+ * context and TX reclaim runs via tp->poll inside of a software
+ * interrupt. Furthermore, IRQ processing runs lockless so we have
+ * no IRQ context deadlocks to worry about either. Rejoice!
+ */
+ if (!spin_trylock(&tp->tx_lock))
+ return NETDEV_TX_LOCKED;
+
+ if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) {
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
+
+ /* This is a hard error, log it. */
+ printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
+ "queue awake!\n", dev->name);
+ }
+ spin_unlock(&tp->tx_lock);
+ return NETDEV_TX_BUSY;
+ }
+
+ entry = tp->tx_prod;
+ base_flags = 0;
+#if TG3_TSO_SUPPORT != 0
+ mss = 0;
+ if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
+ (mss = skb_shinfo(skb)->tso_size) != 0) {
+ int tcp_opt_len, ip_tcp_len;
+
+ if (skb_header_cloned(skb) &&
+ pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
+ dev_kfree_skb(skb);
+ goto out_unlock;
+ }
+
+ tcp_opt_len = ((skb->h.th->doff - 5) * 4);
+ ip_tcp_len = (skb->nh.iph->ihl * 4) + sizeof(struct tcphdr);
+
+ base_flags |= (TXD_FLAG_CPU_PRE_DMA |
+ TXD_FLAG_CPU_POST_DMA);
+
+ skb->nh.iph->check = 0;
+ skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
+
+ skb->h.th->check = 0;
+
+ mss |= (ip_tcp_len + tcp_opt_len) << 9;
+ }
+ else if (skb->ip_summed == CHECKSUM_HW)
+ base_flags |= TXD_FLAG_TCPUDP_CSUM;
+#else
+ mss = 0;
+ if (skb->ip_summed == CHECKSUM_HW)
+ base_flags |= TXD_FLAG_TCPUDP_CSUM;
+#endif
+#if TG3_VLAN_TAG_USED
+ if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
+ base_flags |= (TXD_FLAG_VLAN |
+ (vlan_tx_tag_get(skb) << 16));
+#endif
+
+ /* Queue skb data, a.k.a. the main skb fragment. */
+ mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+
+ tp->tx_buffers[entry].skb = skb;
+ pci_unmap_addr_set(&tp->tx_buffers[entry], mapping, mapping);
+
+ tg3_set_txd(tp, entry, mapping, len, base_flags,
+ (skb_shinfo(skb)->nr_frags == 0) | (mss << 1));
+
+ entry = NEXT_TX(entry);
+
+ /* Now loop through additional data fragments, and queue them. */
+ if (skb_shinfo(skb)->nr_frags > 0) {
+ unsigned int i, last;
+
+ last = skb_shinfo(skb)->nr_frags - 1;
+ for (i = 0; i <= last; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ len = frag->size;
+ mapping = pci_map_page(tp->pdev,
+ frag->page,
+ frag->page_offset,
+ len, PCI_DMA_TODEVICE);
+
+ tp->tx_buffers[entry].skb = NULL;
+ pci_unmap_addr_set(&tp->tx_buffers[entry], mapping, mapping);
+
+ tg3_set_txd(tp, entry, mapping, len,
+ base_flags, (i == last) | (mss << 1));
+
+ entry = NEXT_TX(entry);
+ }
+ }
+
+ /* Packets are ready, update Tx producer idx local and on card. */
+ tw32_tx_mbox((MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW), entry);
+
+ tp->tx_prod = entry;
+ if (TX_BUFFS_AVAIL(tp) <= (MAX_SKB_FRAGS + 1)) {
+ netif_stop_queue(dev);
+ if (TX_BUFFS_AVAIL(tp) > TG3_TX_WAKEUP_THRESH)
+ netif_wake_queue(tp->dev);
+ }
+
+out_unlock:
+ mmiowb();
+ spin_unlock(&tp->tx_lock);
+
+ dev->trans_start = jiffies;
+
+ return NETDEV_TX_OK;
+}
+
+/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
+ * support TG3_FLG2_HW_TSO_1 or firmware TSO only.
+ */
+static int tg3_start_xmit_dma_bug(struct sk_buff *skb, struct net_device *dev)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ dma_addr_t mapping;
+ u32 len, entry, base_flags, mss;
int would_hit_hwbug;
len = skb_headlen(skb);
@@ -9811,8 +9939,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
(tp->tg3_flags2 & TG3_FLG2_5750_PLUS))
tp->tg3_flags2 |= TG3_FLG2_5705_PLUS;
- if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
- tp->tg3_flags2 |= TG3_FLG2_HW_TSO;
+ if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+ tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
+ else
+ tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1;
+ }
if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5705 &&
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 &&
@@ -10163,10 +10295,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
else
tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
- /* It seems all chips can get confused if TX buffers
+ /* All chips before 5787 can get confused if TX buffers
* straddle the 4GB address boundary in some cases.
*/
- tp->dev->hard_start_xmit = tg3_start_xmit;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+ tp->dev->hard_start_xmit = tg3_start_xmit;
+ else
+ tp->dev->hard_start_xmit = tg3_start_xmit_dma_bug;
tp->rx_offset = 2;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 &&
OpenPOWER on IntegriCloud