summaryrefslogtreecommitdiffstats
path: root/drivers/net/stmmac/stmmac_mdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/stmmac/stmmac_mdio.c')
-rw-r--r--drivers/net/stmmac/stmmac_mdio.c26
1 files changed, 12 insertions, 14 deletions
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
index 40b2c7929719..d7441616357d 100644
--- a/drivers/net/stmmac/stmmac_mdio.c
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -47,21 +47,20 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned long ioaddr = ndev->base_addr;
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
int data;
u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
((phyreg << 6) & (0x000007C0)));
- regValue |= MII_BUSY; /* in case of GMAC */
+ regValue |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
- do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
- writel(regValue, ioaddr + mii_address);
- do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+ do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
+ writel(regValue, priv->ioaddr + mii_address);
+ do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
/* Read the data from the MII data register */
- data = (int)readl(ioaddr + mii_data);
+ data = (int)readl(priv->ioaddr + mii_data);
return data;
}
@@ -79,7 +78,6 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned long ioaddr = ndev->base_addr;
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
@@ -87,17 +85,18 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
(((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
| MII_WRITE;
- value |= MII_BUSY;
+ value |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
+
/* Wait until any existing MII operation is complete */
- do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+ do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
/* Set the MII address register to write */
- writel(phydata, ioaddr + mii_data);
- writel(value, ioaddr + mii_address);
+ writel(phydata, priv->ioaddr + mii_data);
+ writel(value, priv->ioaddr + mii_address);
/* Wait until any existing MII operation is complete */
- do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+ do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
return 0;
}
@@ -111,7 +110,6 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
- unsigned long ioaddr = ndev->base_addr;
unsigned int mii_address = priv->hw->mii.addr;
if (priv->phy_reset) {
@@ -123,7 +121,7 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
* It doesn't complete its reset until at least one clock cycle
* on MDC, so perform a dummy mdio read.
*/
- writel(0, ioaddr + mii_address);
+ writel(0, priv->ioaddr + mii_address);
return 0;
}
OpenPOWER on IntegriCloud