summaryrefslogtreecommitdiffstats
path: root/drivers/net/sky2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r--drivers/net/sky2.c143
1 files changed, 67 insertions, 76 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 39996bf3b247..7d85a38377a1 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -46,10 +46,6 @@
#include <asm/irq.h>
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-#define SKY2_VLAN_TAG_USED 1
-#endif
-
#include "sky2.h"
#define DRV_NAME "sky2"
@@ -1326,40 +1322,35 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return err;
}
-#ifdef SKY2_VLAN_TAG_USED
-static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
+#define NETIF_F_ALL_VLAN (NETIF_F_HW_VLAN_TX|NETIF_F_HW_VLAN_RX)
+
+static void sky2_vlan_mode(struct net_device *dev)
{
- if (onoff) {
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ if (dev->features & NETIF_F_HW_VLAN_RX)
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
- sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
- TX_VLAN_TAG_ON);
- } else {
+ else
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_OFF);
+
+ dev->vlan_features = dev->features &~ NETIF_F_ALL_VLAN;
+ if (dev->features & NETIF_F_HW_VLAN_TX)
+ sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+ TX_VLAN_TAG_ON);
+ else {
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
+
+ /* Can't do transmit offload of vlan without hw vlan */
+ dev->vlan_features &= ~(NETIF_F_TSO | NETIF_F_SG
+ | NETIF_F_ALL_CSUM);
}
}
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
-{
- struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- u16 port = sky2->port;
-
- netif_tx_lock_bh(dev);
- napi_disable(&hw->napi);
-
- sky2->vlgrp = grp;
- sky2_set_vlan_mode(hw, port, grp != NULL);
-
- sky2_read32(hw, B0_Y2_SP_LISR);
- napi_enable(&hw->napi);
- netif_tx_unlock_bh(dev);
-}
-#endif
-
/* Amount of required worst case padding in rx buffer */
static inline unsigned sky2_rx_pad(const struct sky2_hw *hw)
{
@@ -1635,9 +1626,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
sky2->tx_ring_size - 1);
-#ifdef SKY2_VLAN_TAG_USED
- sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
-#endif
+ sky2_vlan_mode(sky2->netdev);
sky2_rx_start(sky2);
}
@@ -1780,7 +1769,7 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
}
ctrl = 0;
-#ifdef SKY2_VLAN_TAG_USED
+
/* Add VLAN tag, can piggyback on LRGLEN or ADDR64 */
if (vlan_tx_tag_present(skb)) {
if (!le) {
@@ -1792,7 +1781,6 @@ static netdev_tx_t sky2_xmit_frame(struct sk_buff *skb,
le->length = cpu_to_be16(vlan_tx_tag_get(skb));
ctrl |= INS_VLAN;
}
-#endif
/* Handle TCP checksum offload */
if (skb->ip_summed == CHECKSUM_PARTIAL) {
@@ -2432,11 +2420,8 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
struct sk_buff *skb = NULL;
u16 count = (status & GMR_FS_LEN) >> 16;
-#ifdef SKY2_VLAN_TAG_USED
- /* Account for vlan tag */
- if (sky2->vlgrp && (status & GMR_FS_VLAN))
- count -= VLAN_HLEN;
-#endif
+ if (status & GMR_FS_VLAN)
+ count -= VLAN_HLEN; /* Account for vlan tag */
netif_printk(sky2, rx_status, KERN_DEBUG, dev,
"rx slot %u status 0x%x len %d\n",
@@ -2504,17 +2489,9 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
static inline void sky2_skb_rx(const struct sky2_port *sky2,
u32 status, struct sk_buff *skb)
{
-#ifdef SKY2_VLAN_TAG_USED
- u16 vlan_tag = be16_to_cpu(sky2->rx_tag);
- if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
- if (skb->ip_summed == CHECKSUM_NONE)
- vlan_hwaccel_receive_skb(skb, sky2->vlgrp, vlan_tag);
- else
- vlan_gro_receive(&sky2->hw->napi, sky2->vlgrp,
- vlan_tag, skb);
- return;
- }
-#endif
+ if (status & GMR_FS_VLAN)
+ __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag));
+
if (skb->ip_summed == CHECKSUM_NONE)
netif_receive_skb(skb);
else
@@ -2631,7 +2608,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
goto exit_loop;
break;
-#ifdef SKY2_VLAN_TAG_USED
case OP_RXVLAN:
sky2->rx_tag = length;
break;
@@ -2639,7 +2615,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
case OP_RXCHKSVLAN:
sky2->rx_tag = length;
/* fall through */
-#endif
case OP_RXCHKS:
if (likely(sky2->flags & SKY2_FLAG_RX_CHECKSUM))
sky2_rx_checksum(sky2, status);
@@ -3042,6 +3017,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
| SKY2_HW_NEW_LE
| SKY2_HW_AUTO_TX_SUM
| SKY2_HW_ADV_POWER_CTL;
+
+ /* The workaround for status conflicts VLAN tag detection. */
+ if (hw->chip_rev == CHIP_REV_YU_FE2_A0)
+ hw->flags |= SKY2_HW_VLAN_BROKEN;
break;
case CHIP_ID_YUKON_SUPR:
@@ -3411,18 +3390,15 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw)
u32 modes = SUPPORTED_10baseT_Half
| SUPPORTED_10baseT_Full
| SUPPORTED_100baseT_Half
- | SUPPORTED_100baseT_Full
- | SUPPORTED_Autoneg | SUPPORTED_TP;
+ | SUPPORTED_100baseT_Full;
if (hw->flags & SKY2_HW_GIGABIT)
modes |= SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full;
return modes;
} else
- return SUPPORTED_1000baseT_Half
- | SUPPORTED_1000baseT_Full
- | SUPPORTED_Autoneg
- | SUPPORTED_FIBRE;
+ return SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full;
}
static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
@@ -3436,9 +3412,11 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
if (sky2_is_copper(hw)) {
ecmd->port = PORT_TP;
ecmd->speed = sky2->speed;
+ ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
} else {
ecmd->speed = SPEED_1000;
ecmd->port = PORT_FIBRE;
+ ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
}
ecmd->advertising = sky2->advertising;
@@ -3455,8 +3433,19 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
u32 supported = sky2_supported_modes(hw);
if (ecmd->autoneg == AUTONEG_ENABLE) {
+ if (ecmd->advertising & ~supported)
+ return -EINVAL;
+
+ if (sky2_is_copper(hw))
+ sky2->advertising = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ else
+ sky2->advertising = ecmd->advertising |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+
sky2->flags |= SKY2_FLAG_AUTO_SPEED;
- ecmd->advertising = supported;
sky2->duplex = -1;
sky2->speed = -1;
} else {
@@ -3500,8 +3489,6 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
}
- sky2->advertising = ecmd->advertising;
-
if (netif_running(dev)) {
sky2_phy_reinit(sky2);
sky2_set_multicast(dev);
@@ -4229,15 +4216,28 @@ static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
static int sky2_set_flags(struct net_device *dev, u32 data)
{
struct sky2_port *sky2 = netdev_priv(dev);
- u32 supported =
- (sky2->hw->flags & SKY2_HW_RSS_BROKEN) ? 0 : ETH_FLAG_RXHASH;
+ unsigned long old_feat = dev->features;
+ u32 supported = 0;
int rc;
+ if (!(sky2->hw->flags & SKY2_HW_RSS_BROKEN))
+ supported |= ETH_FLAG_RXHASH;
+
+ if (!(sky2->hw->flags & SKY2_HW_VLAN_BROKEN))
+ supported |= ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN;
+
+ printk(KERN_DEBUG "sky2 set_flags: supported %x data %x\n",
+ supported, data);
+
rc = ethtool_op_set_flags(dev, data, supported);
if (rc)
return rc;
- rx_set_rss(dev);
+ if ((old_feat ^ dev->features) & NETIF_F_RXHASH)
+ rx_set_rss(dev);
+
+ if ((old_feat ^ dev->features) & NETIF_F_ALL_VLAN)
+ sky2_vlan_mode(dev);
return 0;
}
@@ -4273,6 +4273,7 @@ static const struct ethtool_ops sky2_ethtool_ops = {
.get_sset_count = sky2_get_sset_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
.set_flags = sky2_set_flags,
+ .get_flags = ethtool_op_get_flags,
};
#ifdef CONFIG_SKY2_DEBUG
@@ -4554,9 +4555,6 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
.ndo_change_mtu = sky2_change_mtu,
.ndo_tx_timeout = sky2_tx_timeout,
.ndo_get_stats64 = sky2_get_stats,
-#ifdef SKY2_VLAN_TAG_USED
- .ndo_vlan_rx_register = sky2_vlan_rx_register,
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = sky2_netpoll,
#endif
@@ -4572,9 +4570,6 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
.ndo_change_mtu = sky2_change_mtu,
.ndo_tx_timeout = sky2_tx_timeout,
.ndo_get_stats64 = sky2_get_stats,
-#ifdef SKY2_VLAN_TAG_USED
- .ndo_vlan_rx_register = sky2_vlan_rx_register,
-#endif
},
};
@@ -4625,7 +4620,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
sky2->port = port;
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG
- | NETIF_F_TSO | NETIF_F_GRO;
+ | NETIF_F_TSO | NETIF_F_GRO;
+
if (highmem)
dev->features |= NETIF_F_HIGHDMA;
@@ -4633,13 +4629,8 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
if (!(hw->flags & SKY2_HW_RSS_BROKEN))
dev->features |= NETIF_F_RXHASH;
-#ifdef SKY2_VLAN_TAG_USED
- /* The workaround for FE+ status conflicts with VLAN tag detection. */
- if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
- sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+ if (!(hw->flags & SKY2_HW_VLAN_BROKEN))
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
- }
-#endif
/* read the mac address */
memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
OpenPOWER on IntegriCloud