summaryrefslogtreecommitdiffstats
path: root/drivers/net/skge.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/skge.c')
-rw-r--r--drivers/net/skge.c54
1 files changed, 19 insertions, 35 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 220e0398f1d5..42daf98ba736 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -1191,7 +1191,7 @@ static void genesis_init(struct skge_hw *hw)
static void genesis_reset(struct skge_hw *hw, int port)
{
- const u8 zero[8] = { 0 };
+ static const u8 zero[8] = { 0 };
u32 reg;
skge_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
@@ -1557,7 +1557,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
int jumbo = hw->dev[port]->mtu > ETH_DATA_LEN;
int i;
u32 r;
- const u8 zero[6] = { 0 };
+ static const u8 zero[6] = { 0 };
for (i = 0; i < 10; i++) {
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -2764,7 +2764,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
td->dma_hi = map >> 32;
if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const int offset = skb_transport_offset(skb);
+ const int offset = skb_checksum_start_offset(skb);
/* This seems backwards, but it is what the sk98lin
* does. Looks like hardware is wrong?
@@ -4012,8 +4012,6 @@ static void __devexit skge_remove(struct pci_dev *pdev)
if (!hw)
return;
- flush_scheduled_work();
-
dev1 = hw->dev[1];
if (dev1)
unregister_netdev(dev1);
@@ -4044,53 +4042,40 @@ static void __devexit skge_remove(struct pci_dev *pdev)
}
#ifdef CONFIG_PM
-static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+static int skge_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, err, wol = 0;
+ int i;
if (!hw)
return 0;
- err = pci_save_state(pdev);
- if (err)
- return err;
-
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct skge_port *skge = netdev_priv(dev);
if (netif_running(dev))
skge_down(dev);
+
if (skge->wol)
skge_wol_init(skge);
-
- wol |= skge->wol;
}
skge_write32(hw, B0_IMSK, 0);
- pci_prepare_to_sleep(pdev);
-
return 0;
}
-static int skge_resume(struct pci_dev *pdev)
+static int skge_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
if (!hw)
return 0;
- err = pci_back_from_sleep(pdev);
- if (err)
- goto out;
-
- err = pci_restore_state(pdev);
- if (err)
- goto out;
-
err = skge_reset(hw);
if (err)
goto out;
@@ -4111,12 +4096,19 @@ static int skge_resume(struct pci_dev *pdev)
out:
return err;
}
+
+static SIMPLE_DEV_PM_OPS(skge_pm_ops, skge_suspend, skge_resume);
+#define SKGE_PM_OPS (&skge_pm_ops)
+
+#else
+
+#define SKGE_PM_OPS NULL
#endif
static void skge_shutdown(struct pci_dev *pdev)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, wol = 0;
+ int i;
if (!hw)
return;
@@ -4127,15 +4119,10 @@ static void skge_shutdown(struct pci_dev *pdev)
if (skge->wol)
skge_wol_init(skge);
- wol |= skge->wol;
}
- if (pci_enable_wake(pdev, PCI_D3cold, wol))
- pci_enable_wake(pdev, PCI_D3hot, wol);
-
- pci_disable_device(pdev);
+ pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
pci_set_power_state(pdev, PCI_D3hot);
-
}
static struct pci_driver skge_driver = {
@@ -4143,11 +4130,8 @@ static struct pci_driver skge_driver = {
.id_table = skge_id_table,
.probe = skge_probe,
.remove = __devexit_p(skge_remove),
-#ifdef CONFIG_PM
- .suspend = skge_suspend,
- .resume = skge_resume,
-#endif
.shutdown = skge_shutdown,
+ .driver.pm = SKGE_PM_OPS,
};
static struct dmi_system_id skge_32bit_dma_boards[] = {
OpenPOWER on IntegriCloud