diff options
Diffstat (limited to 'drivers/net/sfc/sfe4001.c')
| -rw-r--r-- | drivers/net/sfc/sfe4001.c | 126 |
1 files changed, 66 insertions, 60 deletions
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 66a0d1442aba..b27849523990 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -106,28 +106,27 @@ static const u8 xgphy_max_temperature = 90; -void sfe4001_poweroff(struct efx_nic *efx) +static void sfe4001_poweroff(struct efx_nic *efx) { - struct efx_i2c_interface *i2c = &efx->i2c; + struct i2c_client *ioexp_client = efx->board_info.ioexp_client; + struct i2c_client *hwmon_client = efx->board_info.hwmon_client; - u8 cfg, out, in; + /* Turn off all power rails and disable outputs */ + i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff); + i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff); + i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff); - EFX_INFO(efx, "%s\n", __func__); - - /* Turn off all power rails */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); - - /* Disable port 1 outputs on IO expander */ - cfg = 0xff; - efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + /* Clear any over-temperature alert */ + i2c_smbus_read_byte_data(hwmon_client, RSL); +} - /* Disable port 0 outputs on IO expander */ - cfg = 0xff; - efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); +static void sfe4001_fini(struct efx_nic *efx) +{ + EFX_INFO(efx, "%s\n", __func__); - /* Clear any over-temperature alert */ - efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + sfe4001_poweroff(efx); + i2c_unregister_device(efx->board_info.ioexp_client); + i2c_unregister_device(efx->board_info.hwmon_client); } /* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected @@ -143,14 +142,26 @@ MODULE_PARM_DESC(phy_flash_cfg, * be turned on before the PHY can be used. * Context: Process context, rtnl lock held */ -int sfe4001_poweron(struct efx_nic *efx) +int sfe4001_init(struct efx_nic *efx) { - struct efx_i2c_interface *i2c = &efx->i2c; + struct i2c_client *hwmon_client, *ioexp_client; unsigned int count; int rc; - u8 out, in, cfg; + u8 out; efx_dword_t reg; + hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647); + if (!hwmon_client) + return -EIO; + efx->board_info.hwmon_client = hwmon_client; + + ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539); + if (!ioexp_client) { + rc = -EIO; + goto fail_hwmon; + } + efx->board_info.ioexp_client = ioexp_client; + /* 10Xpress has fixed-function LED pins, so there is no board-specific * blink code. */ efx->board_info.blink = tenxpress_phy_blink; @@ -166,44 +177,45 @@ int sfe4001_poweron(struct efx_nic *efx) falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); udelay(10); + efx->board_info.fini = sfe4001_fini; + /* Set DSP over-temperature alert threshold */ EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); - rc = efx_i2c_write(i2c, MAX6647, WLHO, - &xgphy_max_temperature, 1); + rc = i2c_smbus_write_byte_data(hwmon_client, WLHO, + xgphy_max_temperature); if (rc) - goto fail1; + goto fail_ioexp; /* Read it back and verify */ - rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1); - if (rc) - goto fail1; - if (in != xgphy_max_temperature) { + rc = i2c_smbus_read_byte_data(hwmon_client, RLHN); + if (rc < 0) + goto fail_ioexp; + if (rc != xgphy_max_temperature) { rc = -EFAULT; - goto fail1; + goto fail_ioexp; } /* Clear any previous over-temperature alert */ - rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1); - if (rc) - goto fail1; + rc = i2c_smbus_read_byte_data(hwmon_client, RSL); + if (rc < 0) + goto fail_ioexp; /* Enable port 0 and port 1 outputs on IO expander */ - cfg = 0x00; - rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00); if (rc) - goto fail1; - cfg = 0xff & ~(1 << P1_SPARE_LBN); - rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + goto fail_ioexp; + rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, + 0xff & ~(1 << P1_SPARE_LBN)); if (rc) - goto fail2; + goto fail_on; /* Turn all power off then wait 1 sec. This ensures PHY is reset */ out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) | (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) | (0 << P0_EN_1V0X_LBN)); - rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); if (rc) - goto fail3; + goto fail_on; schedule_timeout_uninterruptible(HZ); count = 0; @@ -215,26 +227,26 @@ int sfe4001_poweron(struct efx_nic *efx) if (sfe4001_phy_flash_cfg) out |= 1 << P0_EN_3V3X_LBN; - rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); if (rc) - goto fail3; + goto fail_on; msleep(10); /* Turn on 1V power rail */ out &= ~(1 << P0_EN_1V0X_LBN); - rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); if (rc) - goto fail3; + goto fail_on; EFX_INFO(efx, "waiting for power (attempt %d)...\n", count); schedule_timeout_uninterruptible(HZ); /* Check DSP is powered */ - rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1); - if (rc) - goto fail3; - if (in & (1 << P1_AFE_PWD_LBN)) + rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN); + if (rc < 0) + goto fail_on; + if (rc & (1 << P1_AFE_PWD_LBN)) goto done; /* DSP doesn't look powered in flash config mode */ @@ -244,23 +256,17 @@ int sfe4001_poweron(struct efx_nic *efx) EFX_INFO(efx, "timed out waiting for power\n"); rc = -ETIMEDOUT; - goto fail3; + goto fail_on; done: EFX_INFO(efx, "PHY is powered on\n"); return 0; -fail3: - /* Turn off all power rails */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); - /* Disable port 1 outputs on IO expander */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); -fail2: - /* Disable port 0 outputs on IO expander */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); -fail1: +fail_on: + sfe4001_poweroff(efx); +fail_ioexp: + i2c_unregister_device(ioexp_client); +fail_hwmon: + i2c_unregister_device(hwmon_client); return rc; } |
