diff options
Diffstat (limited to 'drivers/net/qlcnic')
-rw-r--r-- | drivers/net/qlcnic/qlcnic.h | 9 | ||||
-rw-r--r-- | drivers/net/qlcnic/qlcnic_ctx.c | 26 | ||||
-rw-r--r-- | drivers/net/qlcnic/qlcnic_ethtool.c | 68 |
3 files changed, 40 insertions, 63 deletions
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h index 1934ed9a1aad..f729363b3fc3 100644 --- a/drivers/net/qlcnic/qlcnic.h +++ b/drivers/net/qlcnic/qlcnic.h @@ -36,8 +36,8 @@ #define _QLCNIC_LINUX_MAJOR 5 #define _QLCNIC_LINUX_MINOR 0 -#define _QLCNIC_LINUX_SUBVERSION 16 -#define QLCNIC_LINUX_VERSIONID "5.0.16" +#define _QLCNIC_LINUX_SUBVERSION 17 +#define QLCNIC_LINUX_VERSIONID "5.0.17" #define QLCNIC_DRV_IDC_VER 0x01 #define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\ (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION)) @@ -573,8 +573,10 @@ struct qlcnic_recv_context { #define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH 0x00000028 #define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG 0x00000029 #define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS 0x0000002a +#define QLCNIC_CDRP_CMD_CONFIG_PORT 0x0000002E #define QLCNIC_RCODE_SUCCESS 0 +#define QLCNIC_RCODE_NOT_SUPPORTED 9 #define QLCNIC_RCODE_TIMEOUT 17 #define QLCNIC_DESTROY_CTX_RESET 0 @@ -1155,8 +1157,7 @@ struct qlcnic_esw_statistics { struct __qlcnic_esw_statistics tx; }; -int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val); -int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val); +int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config); u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off); int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data); diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c index 050fa5a99ff7..3a99886e4736 100644 --- a/drivers/net/qlcnic/qlcnic_ctx.c +++ b/drivers/net/qlcnic/qlcnic_ctx.c @@ -359,33 +359,15 @@ qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter) } int -qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val) -{ - - if (qlcnic_issue_cmd(adapter, - adapter->ahw->pci_func, - adapter->fw_hal_version, - reg, - 0, - 0, - QLCNIC_CDRP_CMD_READ_PHY)) { - - return -EIO; - } - - return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET); -} - -int -qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val) +qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config) { return qlcnic_issue_cmd(adapter, adapter->ahw->pci_func, adapter->fw_hal_version, - reg, - val, + config, + 0, 0, - QLCNIC_CDRP_CMD_WRITE_PHY); + QLCNIC_CDRP_CMD_CONFIG_PORT); } int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter) diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c index 8db1d1983cfe..27726ebfba2a 100644 --- a/drivers/net/qlcnic/qlcnic_ethtool.c +++ b/drivers/net/qlcnic/qlcnic_ethtool.c @@ -284,50 +284,44 @@ skip: static int qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { + u32 config = 0; + u32 ret = 0; struct qlcnic_adapter *adapter = netdev_priv(dev); - __u32 status; + + if (adapter->ahw->port_type != QLCNIC_GBE) + return -EOPNOTSUPP; /* read which mode */ - if (adapter->ahw->port_type == QLCNIC_GBE) { - /* autonegotiation */ - if (qlcnic_fw_cmd_set_phy(adapter, - QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG, - ecmd->autoneg) != 0) - return -EIO; - else - adapter->link_autoneg = ecmd->autoneg; + if (ecmd->duplex) + config |= 0x1; - if (qlcnic_fw_cmd_query_phy(adapter, - QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, - &status) != 0) - return -EIO; + if (ecmd->autoneg) + config |= 0x2; - switch (ecmd->speed) { - case SPEED_10: - qlcnic_set_phy_speed(status, 0); - break; - case SPEED_100: - qlcnic_set_phy_speed(status, 1); - break; - case SPEED_1000: - qlcnic_set_phy_speed(status, 2); - break; - } + switch (ethtool_cmd_speed(ecmd)) { + case SPEED_10: + config |= (0 << 8); + break; + case SPEED_100: + config |= (1 << 8); + break; + case SPEED_1000: + config |= (10 << 8); + break; + default: + return -EIO; + } - if (ecmd->duplex == DUPLEX_HALF) - qlcnic_clear_phy_duplex(status); - if (ecmd->duplex == DUPLEX_FULL) - qlcnic_set_phy_duplex(status); - if (qlcnic_fw_cmd_set_phy(adapter, - QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, - *((int *)&status)) != 0) - return -EIO; - else { - adapter->link_speed = ecmd->speed; - adapter->link_duplex = ecmd->duplex; - } - } else + ret = qlcnic_fw_cmd_set_port(adapter, config); + + if (ret == QLCNIC_RCODE_NOT_SUPPORTED) return -EOPNOTSUPP; + else if (ret) + return -EIO; + + adapter->link_speed = ethtool_cmd_speed(ecmd); + adapter->link_duplex = ecmd->duplex; + adapter->link_autoneg = ecmd->autoneg; if (!netif_running(dev)) return 0; |