diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/bcm87xx.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/micrel.c | 45 | ||||
| -rw-r--r-- | drivers/net/phy/smsc.c | 28 |
3 files changed, 65 insertions, 10 deletions
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c index 2346b38b9837..799789518e87 100644 --- a/drivers/net/phy/bcm87xx.c +++ b/drivers/net/phy/bcm87xx.c @@ -229,3 +229,5 @@ static void __exit bcm87xx_exit(void) ARRAY_SIZE(bcm87xx_driver)); } module_exit(bcm87xx_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index cf287e0eb408..2165d5fdb8c0 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -21,6 +21,12 @@ #include <linux/phy.h> #include <linux/micrel_phy.h> +/* Operation Mode Strap Override */ +#define MII_KSZPHY_OMSO 0x16 +#define KSZPHY_OMSO_B_CAST_OFF (1 << 9) +#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1) +#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0) + /* general Interrupt control/status reg in vendor specific block. */ #define MII_KSZPHY_INTCS 0x1B #define KSZPHY_INTCS_JABBER (1 << 15) @@ -101,6 +107,13 @@ static int kszphy_config_init(struct phy_device *phydev) return 0; } +static int ksz8021_config_init(struct phy_device *phydev) +{ + const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE; + phy_write(phydev, MII_KSZPHY_OMSO, val); + return 0; +} + static int ks8051_config_init(struct phy_device *phydev) { int regval; @@ -128,9 +141,22 @@ static struct phy_driver ksphy_driver[] = { .config_intr = ks8737_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8041, + .phy_id = PHY_ID_KSZ8021, + .phy_id_mask = 0x00ffffff, + .name = "Micrel KSZ8021", + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | + SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = ksz8021_config_init, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .ack_interrupt = kszphy_ack_interrupt, + .config_intr = kszphy_config_intr, + .driver = { .owner = THIS_MODULE,}, +}, { + .phy_id = PHY_ID_KSZ8041, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8041", + .name = "Micrel KSZ8041", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -141,9 +167,9 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8051, + .phy_id = PHY_ID_KSZ8051, .phy_id_mask = 0x00fffff0, - .name = "Micrel KS8051", + .name = "Micrel KSZ8051", .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -154,8 +180,8 @@ static struct phy_driver ksphy_driver[] = { .config_intr = kszphy_config_intr, .driver = { .owner = THIS_MODULE,}, }, { - .phy_id = PHY_ID_KS8001, - .name = "Micrel KS8001 or KS8721", + .phy_id = PHY_ID_KSZ8001, + .name = "Micrel KSZ8001 or KS8721", .phy_id_mask = 0x00ffffff, .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, @@ -201,10 +227,11 @@ MODULE_LICENSE("GPL"); static struct mdio_device_id __maybe_unused micrel_tbl[] = { { PHY_ID_KSZ9021, 0x000ffffe }, - { PHY_ID_KS8001, 0x00ffffff }, + { PHY_ID_KSZ8001, 0x00ffffff }, { PHY_ID_KS8737, 0x00fffff0 }, - { PHY_ID_KS8041, 0x00fffff0 }, - { PHY_ID_KS8051, 0x00fffff0 }, + { PHY_ID_KSZ8021, 0x00ffffff }, + { PHY_ID_KSZ8041, 0x00fffff0 }, + { PHY_ID_KSZ8051, 0x00fffff0 }, { } }; diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 6d6192316b30..88e3991464e7 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -56,6 +56,32 @@ static int smsc_phy_config_init(struct phy_device *phydev) return smsc_phy_ack_interrupt (phydev); } +static int lan87xx_config_init(struct phy_device *phydev) +{ + /* + * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on + * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due + * to a bug on the chip. + * + * When the system is powered on with the network cable being + * disconnected all the way until after ifconfig ethX up is + * issued for the LAN port with this PHY, connecting the cable + * afterwards does not cause LINK change detection, while the + * expected behavior is the Link UP being detected. + */ + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); + if (rc < 0) + return rc; + + rc &= ~MII_LAN83C185_EDPWRDOWN; + + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc); + if (rc < 0) + return rc; + + return smsc_phy_ack_interrupt(phydev); +} + static int lan911x_config_init(struct phy_device *phydev) { return smsc_phy_ack_interrupt(phydev); @@ -162,7 +188,7 @@ static struct phy_driver smsc_phy_driver[] = { /* basic functions */ .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .config_init = smsc_phy_config_init, + .config_init = lan87xx_config_init, /* IRQ related */ .ack_interrupt = smsc_phy_ack_interrupt, |
