diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_main.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 64 |
1 files changed, 43 insertions, 21 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 881bbf97ff0c..76fd5c6db02b 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -808,10 +808,14 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) /* if this is a tx only vector halve the interrupt rate */ if (q_vector->txr_count && !q_vector->rxr_count) q_vector->eitr = (adapter->eitr_param >> 1); - else + else if (q_vector->rxr_count) /* rx only */ q_vector->eitr = adapter->eitr_param; + /* + * since ths is initial set up don't need to call + * ixgbe_write_eitr helper + */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), EITR_INTS_PER_SEC_TO_REG(q_vector->eitr)); } @@ -896,10 +900,35 @@ update_itr_done: return retval; } +/** + * ixgbe_write_eitr - write EITR register in hardware specific way + * @adapter: pointer to adapter struct + * @v_idx: vector index into q_vector array + * @itr_reg: new value to be written in *register* format, not ints/s + * + * This function is made to be called by ethtool and by the driver + * when it needs to update EITR registers at runtime. Hardware + * specific quirks/differences are taken care of here. + */ +void ixgbe_write_eitr(struct ixgbe_adapter *adapter, int v_idx, u32 itr_reg) +{ + struct ixgbe_hw *hw = &adapter->hw; + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + /* must write high and low 16 bits to reset counter */ + itr_reg |= (itr_reg << 16); + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + /* + * set the WDIS bit to not clear the timer bits and cause an + * immediate assertion of the interrupt + */ + itr_reg |= IXGBE_EITR_CNT_WDIS; + } + IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg); +} + static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) { struct ixgbe_adapter *adapter = q_vector->adapter; - struct ixgbe_hw *hw = &adapter->hw; u32 new_itr; u8 current_itr, ret_itr; int i, r_idx, v_idx = ((void *)q_vector - (void *)(adapter->q_vector)) / @@ -954,17 +983,13 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) if (new_itr != q_vector->eitr) { u32 itr_reg; + + /* save the algorithm value here, not the smoothed one */ + q_vector->eitr = new_itr; /* do an exponential smoothing */ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); - q_vector->eitr = new_itr; itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); - if (adapter->hw.mac.type == ixgbe_mac_82599EB) - /* Resolution is 2 usec on 82599, so halve the rate */ - itr_reg >>= 1; - /* must write high and low 16 bits to reset counter */ - DPRINTK(TX_ERR, DEBUG, "writing eitr(%d): %08X\n", v_idx, - itr_reg); - IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg | (itr_reg)<<16); + ixgbe_write_eitr(adapter, v_idx, itr_reg); } return; @@ -1141,7 +1166,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 3) + if (adapter->itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, rx_ring->v_idx); @@ -1190,7 +1215,7 @@ static int ixgbe_clean_rxonly_many(struct napi_struct *napi, int budget) /* If all Rx work done, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 3) + if (adapter->itr_setting & 1) ixgbe_set_itr_msix(q_vector); if (!test_bit(__IXGBE_DOWN, &adapter->state)) IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, enable_mask); @@ -1360,7 +1385,6 @@ out: static void ixgbe_set_itr(struct ixgbe_adapter *adapter) { - struct ixgbe_hw *hw = &adapter->hw; struct ixgbe_q_vector *q_vector = adapter->q_vector; u8 current_itr; u32 new_itr = q_vector->eitr; @@ -1395,15 +1419,13 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter) if (new_itr != q_vector->eitr) { u32 itr_reg; + + /* save the algorithm value here, not the smoothed one */ + q_vector->eitr = new_itr; /* do an exponential smoothing */ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100); - q_vector->eitr = new_itr; itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr); - if (adapter->hw.mac.type == ixgbe_mac_82599EB) - /* Resolution is 2 usec on 82599, so halve the rate */ - itr_reg >>= 1; - /* must write high and low 16 bits to reset counter */ - IXGBE_WRITE_REG(hw, IXGBE_EITR(0), itr_reg | (itr_reg)<<16); + ixgbe_write_eitr(adapter, 0, itr_reg); } return; @@ -1701,7 +1723,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE, 0x6A3E67EA, 0x14364D17, 0x3BED200D}; u32 fctrl, hlreg0; - u32 reta = 0, mrqc; + u32 reta = 0, mrqc = 0; u32 rdrxctl; int rx_buf_len; @@ -2589,7 +2611,7 @@ static int ixgbe_poll(struct napi_struct *napi, int budget) /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { napi_complete(napi); - if (adapter->itr_setting & 3) + if (adapter->itr_setting & 1) ixgbe_set_itr(adapter); if (!test_bit(__IXGBE_DOWN, &adapter->state)) ixgbe_irq_enable(adapter); |
