diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 134 |
1 files changed, 98 insertions, 36 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 50b399c1e87f..b3f4e96a018c 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -1177,53 +1177,98 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) { u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; u8 comp_codes_10g = 0; - switch (hw->device_id) { - case IXGBE_DEV_ID_82599: - case IXGBE_DEV_ID_82599_KX4: - /* Default device ID is mezzanine card KX/KX4 */ - physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | - IXGBE_PHYSICAL_LAYER_1000BASE_KX); + hw->phy.ops.identify(hw); + + if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_cu_unknown) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; break; - case IXGBE_DEV_ID_82599_SFP: - hw->phy.ops.identify_sfp(hw); + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } - switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_da_cu: - case ixgbe_sfp_type_da_cu_core0: - case ixgbe_sfp_type_da_cu_core1: - physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; - break; - case ixgbe_sfp_type_sr: +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_tw_tyco: + case ixgbe_phy_tw_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; - break; - case ixgbe_sfp_type_lr: + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; - break; - case ixgbe_sfp_type_srlr_core0: - case ixgbe_sfp_type_srlr_core1: - hw->phy.ops.read_i2c_eeprom(hw, - IXGBE_SFF_10GBE_COMP_CODES, - &comp_codes_10g); - if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) - physical_layer = - IXGBE_PHYSICAL_LAYER_10GBASE_SR; - else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) - physical_layer = - IXGBE_PHYSICAL_LAYER_10GBASE_LR; - else - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - break; - } break; default: - physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; break; } +out: return physical_layer; } @@ -1271,6 +1316,22 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) return 0; } +/** + * ixgbe_get_device_caps_82599 - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities + * + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. + **/ +s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps) +{ + hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); + + return 0; +} + + static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -1280,6 +1341,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, .enable_rx_dma = &ixgbe_enable_rx_dma_82599, .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_device_caps = &ixgbe_get_device_caps_82599, .stop_adapter = &ixgbe_stop_adapter_generic, .get_bus_info = &ixgbe_get_bus_info_generic, .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, |
