diff options
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/adi/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 30 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 60 | ||||
| -rw-r--r-- | drivers/net/ethernet/emulex/benet/be.h | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/emulex/benet/be_main.c | 29 | ||||
| -rw-r--r-- | drivers/net/ethernet/nvidia/forcedeth.c | 35 | ||||
| -rw-r--r-- | drivers/net/ethernet/qlogic/qlge/qlge_main.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 |
10 files changed, 141 insertions, 23 deletions
diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig index e49c0eff040b..a9481606bbcd 100644 --- a/drivers/net/ethernet/adi/Kconfig +++ b/drivers/net/ethernet/adi/Kconfig @@ -61,6 +61,7 @@ config BFIN_RX_DESC_NUM config BFIN_MAC_USE_HWSTAMP bool "Use IEEE 1588 hwstamp" + depends on BFIN_MAC && BF518 select PTP_1588_CLOCK default y ---help--- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 01588b66a38c..f771ddfba646 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -80,12 +80,37 @@ static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to) new_txdata_index = new_max_eth_txqs + FCOE_TXQ_IDX_OFFSET; } - memcpy(&bp->bnx2x_txq[old_txdata_index], - &bp->bnx2x_txq[new_txdata_index], + memcpy(&bp->bnx2x_txq[new_txdata_index], + &bp->bnx2x_txq[old_txdata_index], sizeof(struct bnx2x_fp_txdata)); to_fp->txdata_ptr[0] = &bp->bnx2x_txq[new_txdata_index]; } +/** + * bnx2x_shrink_eth_fp - guarantees fastpath structures stay intact + * + * @bp: driver handle + * @delta: number of eth queues which were not allocated + */ +static void bnx2x_shrink_eth_fp(struct bnx2x *bp, int delta) +{ + int i, cos, old_eth_num = BNX2X_NUM_ETH_QUEUES(bp); + + /* Queue pointer cannot be re-set on an fp-basis, as moving pointer + * backward along the array could cause memory to be overriden + */ + for (cos = 1; cos < bp->max_cos; cos++) { + for (i = 0; i < old_eth_num - delta; i++) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + int new_idx = cos * (old_eth_num - delta) + i; + + memcpy(&bp->bnx2x_txq[new_idx], fp->txdata_ptr[cos], + sizeof(struct bnx2x_fp_txdata)); + fp->txdata_ptr[cos] = &bp->bnx2x_txq[new_idx]; + } + } +} + int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */ /* free skb in the packet ring at pos idx @@ -3863,6 +3888,7 @@ int bnx2x_alloc_fp_mem(struct bnx2x *bp) int delta = BNX2X_NUM_ETH_QUEUES(bp) - i; WARN_ON(delta < 0); + bnx2x_shrink_eth_fp(bp, delta); if (CNIC_SUPPORT(bp)) /* move non eth FPs next to last eth FP * must be done in that order diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 277f17e3c8f8..a427b49a886c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -2777,10 +2777,10 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) } else if ((info->flow_type == UDP_V6_FLOW) && (bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) { bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested; - return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0); DP(BNX2X_MSG_ETHTOOL, "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); + return bnx2x_config_rss_pf(bp, &bp->rss_conf_obj, 0); } else { return 0; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 940ef859dc60..5523da3afcdc 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -127,6 +127,17 @@ MODULE_PARM_DESC(debug, " Default debug msglevel"); struct workqueue_struct *bnx2x_wq; +struct bnx2x_mac_vals { + u32 xmac_addr; + u32 xmac_val; + u32 emac_addr; + u32 emac_val; + u32 umac_addr; + u32 umac_val; + u32 bmac_addr; + u32 bmac_val[2]; +}; + enum bnx2x_board_type { BCM57710 = 0, BCM57711, @@ -9420,12 +9431,19 @@ static inline void bnx2x_undi_int_disable(struct bnx2x *bp) bnx2x_undi_int_disable_e1h(bp); } -static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) +static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, + struct bnx2x_mac_vals *vals) { u32 val, base_addr, offset, mask, reset_reg; bool mac_stopped = false; u8 port = BP_PORT(bp); + /* reset addresses as they also mark which values were changed */ + vals->bmac_addr = 0; + vals->umac_addr = 0; + vals->xmac_addr = 0; + vals->emac_addr = 0; + reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2); if (!CHIP_IS_E3(bp)) { @@ -9447,14 +9465,18 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) */ wb_data[0] = REG_RD(bp, base_addr + offset); wb_data[1] = REG_RD(bp, base_addr + offset + 0x4); + vals->bmac_addr = base_addr + offset; + vals->bmac_val[0] = wb_data[0]; + vals->bmac_val[1] = wb_data[1]; wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE; - REG_WR(bp, base_addr + offset, wb_data[0]); - REG_WR(bp, base_addr + offset + 0x4, wb_data[1]); + REG_WR(bp, vals->bmac_addr, wb_data[0]); + REG_WR(bp, vals->bmac_addr + 0x4, wb_data[1]); } BNX2X_DEV_INFO("Disable emac Rx\n"); - REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0); - + vals->emac_addr = NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4; + vals->emac_val = REG_RD(bp, vals->emac_addr); + REG_WR(bp, vals->emac_addr, 0); mac_stopped = true; } else { if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) { @@ -9465,14 +9487,18 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp) val & ~(1 << 1)); REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI, val | (1 << 1)); - REG_WR(bp, base_addr + XMAC_REG_CTRL, 0); + vals->xmac_addr = base_addr + XMAC_REG_CTRL; + vals->xmac_val = REG_RD(bp, vals->xmac_addr); + REG_WR(bp, vals->xmac_addr, 0); mac_stopped = true; } mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port; if (mask & reset_reg) { BNX2X_DEV_INFO("Disable umac Rx\n"); base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0); + vals->umac_addr = base_addr + UMAC_REG_COMMAND_CONFIG; + vals->umac_val = REG_RD(bp, vals->umac_addr); + REG_WR(bp, vals->umac_addr, 0); mac_stopped = true; } } @@ -9664,12 +9690,16 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) { u32 reset_reg, tmp_reg = 0, rc; bool prev_undi = false; + struct bnx2x_mac_vals mac_vals; + /* It is possible a previous function received 'common' answer, * but hasn't loaded yet, therefore creating a scenario of * multiple functions receiving 'common' on the same path. */ BNX2X_DEV_INFO("Common unload Flow\n"); + memset(&mac_vals, 0, sizeof(mac_vals)); + if (bnx2x_prev_is_path_marked(bp)) return bnx2x_prev_mcp_done(bp); @@ -9680,7 +9710,10 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) u32 timer_count = 1000; /* Close the MAC Rx to prevent BRB from filling up */ - bnx2x_prev_unload_close_mac(bp); + bnx2x_prev_unload_close_mac(bp, &mac_vals); + + /* close LLH filters towards the BRB */ + bnx2x_set_rx_filter(&bp->link_params, 0); /* Check if the UNDI driver was previously loaded * UNDI driver initializes CID offset for normal bell to 0x7 @@ -9727,6 +9760,17 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* No packets are in the pipeline, path is ready for reset */ bnx2x_reset_common(bp); + if (mac_vals.xmac_addr) + REG_WR(bp, mac_vals.xmac_addr, mac_vals.xmac_val); + if (mac_vals.umac_addr) + REG_WR(bp, mac_vals.umac_addr, mac_vals.umac_val); + if (mac_vals.emac_addr) + REG_WR(bp, mac_vals.emac_addr, mac_vals.emac_val); + if (mac_vals.bmac_addr) { + REG_WR(bp, mac_vals.bmac_addr, mac_vals.bmac_val[0]); + REG_WR(bp, mac_vals.bmac_addr + 4, mac_vals.bmac_val[1]); + } + rc = bnx2x_prev_mark_path(bp, prev_undi); if (rc) { bnx2x_prev_mcp_done(bp); diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 3bc1912afba9..4eba17b83ba8 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -190,6 +190,7 @@ struct be_eq_obj { u8 idx; /* array index */ u16 tx_budget; + u16 spurious_intr; struct napi_struct napi; struct be_adapter *adapter; } ____cacheline_aligned_in_smp; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 9dca22be8125..5c995700e534 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2026,19 +2026,30 @@ static irqreturn_t be_intx(int irq, void *dev) struct be_adapter *adapter = eqo->adapter; int num_evts = 0; - /* On Lancer, clear-intr bit of the EQ DB does not work. - * INTx is de-asserted only on notifying num evts. + /* IRQ is not expected when NAPI is scheduled as the EQ + * will not be armed. + * But, this can happen on Lancer INTx where it takes + * a while to de-assert INTx or in BE2 where occasionaly + * an interrupt may be raised even when EQ is unarmed. + * If NAPI is already scheduled, then counting & notifying + * events will orphan them. */ - if (lancer_chip(adapter)) + if (napi_schedule_prep(&eqo->napi)) { num_evts = events_get(eqo); + __napi_schedule(&eqo->napi); + if (num_evts) + eqo->spurious_intr = 0; + } + be_eq_notify(adapter, eqo->q.id, false, true, num_evts); - /* The EQ-notify may not de-assert INTx rightaway, causing - * the ISR to be invoked again. So, return HANDLED even when - * num_evts is zero. + /* Return IRQ_HANDLED only for the the first spurious intr + * after a valid intr to stop the kernel from branding + * this irq as a bad one! */ - be_eq_notify(adapter, eqo->q.id, false, true, num_evts); - napi_schedule(&eqo->napi); - return IRQ_HANDLED; + if (num_evts || eqo->spurious_intr++ == 0) + return IRQ_HANDLED; + else + return IRQ_NONE; } static irqreturn_t be_msix(int irq, void *dev) diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c index 653487dc7b52..87fa5919c455 100644 --- a/drivers/net/ethernet/nvidia/forcedeth.c +++ b/drivers/net/ethernet/nvidia/forcedeth.c @@ -1821,6 +1821,11 @@ static int nv_alloc_rx(struct net_device *dev) skb->data, skb_tailroom(skb), PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(np->pci_dev, + np->put_rx_ctx->dma)) { + kfree_skb(skb); + goto packet_dropped; + } np->put_rx_ctx->dma_len = skb_tailroom(skb); np->put_rx.orig->buf = cpu_to_le32(np->put_rx_ctx->dma); wmb(); @@ -1830,6 +1835,7 @@ static int nv_alloc_rx(struct net_device *dev) if (unlikely(np->put_rx_ctx++ == np->last_rx_ctx)) np->put_rx_ctx = np->first_rx_ctx; } else { +packet_dropped: u64_stats_update_begin(&np->swstats_rx_syncp); np->stat_rx_dropped++; u64_stats_update_end(&np->swstats_rx_syncp); @@ -1856,6 +1862,11 @@ static int nv_alloc_rx_optimized(struct net_device *dev) skb->data, skb_tailroom(skb), PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(np->pci_dev, + np->put_rx_ctx->dma)) { + kfree_skb(skb); + goto packet_dropped; + } np->put_rx_ctx->dma_len = skb_tailroom(skb); np->put_rx.ex->bufhigh = cpu_to_le32(dma_high(np->put_rx_ctx->dma)); np->put_rx.ex->buflow = cpu_to_le32(dma_low(np->put_rx_ctx->dma)); @@ -1866,6 +1877,7 @@ static int nv_alloc_rx_optimized(struct net_device *dev) if (unlikely(np->put_rx_ctx++ == np->last_rx_ctx)) np->put_rx_ctx = np->first_rx_ctx; } else { +packet_dropped: u64_stats_update_begin(&np->swstats_rx_syncp); np->stat_rx_dropped++; u64_stats_update_end(&np->swstats_rx_syncp); @@ -2217,6 +2229,15 @@ static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev) bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size; np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(np->pci_dev, + np->put_tx_ctx->dma)) { + /* on DMA mapping error - drop the packet */ + kfree_skb(skb); + u64_stats_update_begin(&np->swstats_tx_syncp); + np->stat_tx_dropped++; + u64_stats_update_end(&np->swstats_tx_syncp); + return NETDEV_TX_OK; + } np->put_tx_ctx->dma_len = bcnt; np->put_tx_ctx->dma_single = 1; put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma); @@ -2337,6 +2358,15 @@ static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb, bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size; np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(np->pci_dev, + np->put_tx_ctx->dma)) { + /* on DMA mapping error - drop the packet */ + kfree_skb(skb); + u64_stats_update_begin(&np->swstats_tx_syncp); + np->stat_tx_dropped++; + u64_stats_update_end(&np->swstats_tx_syncp); + return NETDEV_TX_OK; + } np->put_tx_ctx->dma_len = bcnt; np->put_tx_ctx->dma_single = 1; put_tx->bufhigh = cpu_to_le32(dma_high(np->put_tx_ctx->dma)); @@ -5003,6 +5033,11 @@ static int nv_loopback_test(struct net_device *dev) test_dma_addr = pci_map_single(np->pci_dev, tx_skb->data, skb_tailroom(tx_skb), PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(np->pci_dev, + test_dma_addr)) { + dev_kfree_skb_any(tx_skb); + goto out; + } pkt_data = skb_put(tx_skb, pkt_len); for (i = 0; i < pkt_len; i++) pkt_data[i] = (u8)(i & 0xff); diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index f80cd975daed..3e73742024b0 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4678,7 +4678,7 @@ static int qlge_probe(struct pci_dev *pdev, qdev = netdev_priv(ndev); SET_NETDEV_DEV(ndev, &pdev->dev); ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | - NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN | + NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM; ndev->features = ndev->hw_features | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index 5778a4ae1164..122d60c0481b 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -27,7 +27,7 @@ config XILINX_EMACLITE config XILINX_AXI_EMAC tristate "Xilinx 10/100/1000 AXI Ethernet support" - depends on (PPC32 || MICROBLAZE) + depends on MICROBLAZE select PHYLIB ---help--- This driver supports the 10/100/1000 Ethernet from Xilinx for the diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index d9f69b82cc4f..6f47100e58d7 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1590,7 +1590,7 @@ static int axienet_of_probe(struct platform_device *op) lp->rx_irq = irq_of_parse_and_map(np, 1); lp->tx_irq = irq_of_parse_and_map(np, 0); of_node_put(np); - if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) { + if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { dev_err(&op->dev, "could not determine irqs\n"); ret = -ENOMEM; goto err_iounmap_2; |
