diff options
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/dec/tulip/tulip_core.c | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/lantiq_etop.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/marvell/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlx4/en_tx.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 330 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 5 | ||||
| -rw-r--r-- | drivers/net/ethernet/ti/cpsw.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/tile/tilegx.c | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 13 |
17 files changed, 384 insertions, 23 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 9d7419e0390b..66c0df78c3ff 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1873,7 +1873,7 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) } u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv) + void *accel_priv, select_queue_fallback_t fallback) { struct bnx2x *bp = netdev_priv(dev); @@ -1895,7 +1895,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, } /* select a non-FCoE queue */ - return __netdev_pick_tx(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp); + return fallback(dev, skb) % BNX2X_NUM_ETH_QUEUES(bp); } void bnx2x_set_num_queues(struct bnx2x *bp) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index bfc58d488bb5..a89a40f88c25 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -496,7 +496,7 @@ int bnx2x_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos); /* select_queue callback */ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv); + void *accel_priv, select_queue_fallback_t fallback); static inline void bnx2x_update_rx_prod(struct bnx2x *bp, struct bnx2x_fastpath *fp, diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c index add05f14b38b..1642de78aac8 100644 --- a/drivers/net/ethernet/dec/tulip/tulip_core.c +++ b/drivers/net/ethernet/dec/tulip/tulip_core.c @@ -1939,6 +1939,7 @@ static void tulip_remove_one(struct pci_dev *pdev) pci_iounmap(pdev, tp->base_addr); free_netdev (dev); pci_release_regions (pdev); + pci_disable_device(pdev); /* pci_power_off (pdev, -1); */ } diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index d4782b42401b..903362a7b584 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1778,8 +1778,6 @@ fec_enet_open(struct net_device *ndev) struct fec_enet_private *fep = netdev_priv(ndev); int ret; - napi_enable(&fep->napi); - /* I should reset the ring buffers here, but I don't yet know * a simple way to do that. */ @@ -1794,6 +1792,8 @@ fec_enet_open(struct net_device *ndev) fec_enet_free_buffers(ndev); return ret; } + + napi_enable(&fep->napi); phy_start(fep->phy_dev); netif_start_queue(ndev); fep->opened = 1; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 6d4ada72dfd0..18076c4178b4 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6881,7 +6881,7 @@ static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) } static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv) + void *accel_priv, select_queue_fallback_t fallback) { struct ixgbe_fwd_adapter *fwd_adapter = accel_priv; #ifdef IXGBE_FCOE @@ -6907,7 +6907,7 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb, if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) break; default: - return __netdev_pick_tx(dev, skb); + return fallback(dev, skb); } f = &adapter->ring_feature[RING_F_FCOE]; @@ -6920,7 +6920,7 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb, return txq + f->offset; #else - return __netdev_pick_tx(dev, skb); + return fallback(dev, skb); #endif } diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c index 8f9266c64c75..fd4b6aecf6ee 100644 --- a/drivers/net/ethernet/lantiq_etop.c +++ b/drivers/net/ethernet/lantiq_etop.c @@ -619,7 +619,7 @@ ltq_etop_set_multicast_list(struct net_device *dev) static u16 ltq_etop_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv) + void *accel_priv, select_queue_fallback_t fallback) { /* we are currently only using the first queue */ return 0; diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index 6300fd27f2db..68e6a6613e9a 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -43,12 +43,12 @@ config MVMDIO This driver is used by the MV643XX_ETH and MVNETA drivers. config MVNETA - tristate "Marvell Armada 370/XP network interface support" - depends on MACH_ARMADA_370_XP + tristate "Marvell Armada 370/38x/XP network interface support" + depends on PLAT_ORION select MVMDIO ---help--- This driver supports the network interface units in the - Marvell ARMADA XP and ARMADA 370 SoC family. + Marvell ARMADA XP, ARMADA 370 and ARMADA 38x SoC family. Note that this driver is distinct from the mv643xx_eth driver, which should be used for the older Marvell SoCs diff --git a/drivers/net/ethernet/mellanox/mlx4/en_tx.c b/drivers/net/ethernet/mellanox/mlx4/en_tx.c index 8e8a7eb43a2c..13457032d15f 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_tx.c @@ -629,7 +629,7 @@ static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *sk } u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv) + void *accel_priv, select_queue_fallback_t fallback) { struct mlx4_en_priv *priv = netdev_priv(dev); u16 rings_p_up = priv->num_tx_rings_p_up; @@ -641,7 +641,7 @@ u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb, if (vlan_tx_tag_present(skb)) up = vlan_tx_tag_get(skb) >> VLAN_PRIO_SHIFT; - return __netdev_pick_tx(dev, skb) % rings_p_up + up * rings_p_up; + return fallback(dev, skb) % rings_p_up + up * rings_p_up; } static void mlx4_bf_copy(void __iomem *dst, unsigned long *src, unsigned bytecnt) diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h index 3af04c3f42ea..9ca223bc90fc 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -723,7 +723,7 @@ int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); void mlx4_en_tx_irq(struct mlx4_cq *mcq); u16 mlx4_en_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv); + void *accel_priv, select_queue_fallback_t fallback); netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev); int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index e2f202e3932f..f2d7c702c77f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -37,6 +37,17 @@ config DWMAC_SUNXI stmmac device driver. This driver is used for A20/A31 GMAC ethernet controller. +config DWMAC_STI + bool "STi GMAC support" + depends on STMMAC_PLATFORM && ARCH_STI + default y + ---help--- + Support for ethernet controller on STi SOCs. + + This selects STi SoC glue layer support for the stmmac + device driver. This driver is used on for the STi series + SOCs GMAC ethernet controller. + config STMMAC_PCI bool "STMMAC PCI bus support" depends on STMMAC_ETH && PCI diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index ecadecea79b2..dcef28775dad 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_STMMAC_ETH) += stmmac.o stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o +stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \ chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c new file mode 100644 index 000000000000..552bbc17863c --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c @@ -0,0 +1,330 @@ +/** + * dwmac-sti.c - STMicroelectronics DWMAC Specific Glue layer + * + * Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/stmmac.h> +#include <linux/phy.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_net.h> + +/** + * STi GMAC glue logic. + * -------------------- + * + * _ + * | \ + * --------|0 \ ETH_SEL_INTERNAL_NOTEXT_PHYCLK + * phyclk | |___________________________________________ + * | | | (phyclk-in) + * --------|1 / | + * int-clk |_ / | + * | _ + * | | \ + * |_______|1 \ ETH_SEL_TX_RETIME_CLK + * | |___________________________ + * | | (tx-retime-clk) + * _______|0 / + * | |_ / + * _ | + * | \ | + * --------|0 \ | + * clk_125 | |__| + * | | ETH_SEL_TXCLK_NOT_CLK125 + * --------|1 / + * txclk |_ / + * + * + * ETH_SEL_INTERNAL_NOTEXT_PHYCLK is valid only for RMII where PHY can + * generate 50MHz clock or MAC can generate it. + * This bit is configured by "st,ext-phyclk" property. + * + * ETH_SEL_TXCLK_NOT_CLK125 is only valid for gigabit modes, where the 125Mhz + * clock either comes from clk-125 pin or txclk pin. This configuration is + * totally driven by the board wiring. This bit is configured by + * "st,tx-retime-src" property. + * + * TXCLK configuration is different for different phy interface modes + * and changes according to link speed in modes like RGMII. + * + * Below table summarizes the clock requirement and clock sources for + * supported phy interface modes with link speeds. + * ________________________________________________ + *| PHY_MODE | 1000 Mbit Link | 100 Mbit Link | + * ------------------------------------------------ + *| MII | n/a | 25Mhz | + *| | | txclk | + * ------------------------------------------------ + *| GMII | 125Mhz | 25Mhz | + *| | clk-125/txclk | txclk | + * ------------------------------------------------ + *| RGMII | 125Mhz | 25Mhz | + *| | clk-125/txclk | clkgen | + * ------------------------------------------------ + *| RMII | n/a | 25Mhz | + *| | |clkgen/phyclk-in | + * ------------------------------------------------ + * + * TX lines are always retimed with a clk, which can vary depending + * on the board configuration. Below is the table of these bits + * in eth configuration register depending on source of retime clk. + * + *--------------------------------------------------------------- + * src | tx_rt_clk | int_not_ext_phyclk | txclk_n_clk125| + *--------------------------------------------------------------- + * txclk | 0 | n/a | 1 | + *--------------------------------------------------------------- + * ck_125| 0 | n/a | 0 | + *--------------------------------------------------------------- + * phyclk| 1 | 0 | n/a | + *--------------------------------------------------------------- + * clkgen| 1 | 1 | n/a | + *--------------------------------------------------------------- + */ + + /* Register definition */ + + /* 3 bits [8:6] + * [6:6] ETH_SEL_TXCLK_NOT_CLK125 + * [7:7] ETH_SEL_INTERNAL_NOTEXT_PHYCLK + * [8:8] ETH_SEL_TX_RETIME_CLK + * + */ + +#define TX_RETIME_SRC_MASK GENMASK(8, 6) +#define ETH_SEL_TX_RETIME_CLK BIT(8) +#define ETH_SEL_INTERNAL_NOTEXT_PHYCLK BIT(7) +#define ETH_SEL_TXCLK_NOT_CLK125 BIT(6) + +#define ENMII_MASK GENMASK(5, 5) +#define ENMII BIT(5) + +/** + * 3 bits [4:2] + * 000-GMII/MII + * 001-RGMII + * 010-SGMII + * 100-RMII +*/ +#define MII_PHY_SEL_MASK GENMASK(4, 2) +#define ETH_PHY_SEL_RMII BIT(4) +#define ETH_PHY_SEL_SGMII BIT(3) +#define ETH_PHY_SEL_RGMII BIT(2) +#define ETH_PHY_SEL_GMII 0x0 +#define ETH_PHY_SEL_MII 0x0 + +#define IS_PHY_IF_MODE_RGMII(iface) (iface == PHY_INTERFACE_MODE_RGMII || \ + iface == PHY_INTERFACE_MODE_RGMII_ID || \ + iface == PHY_INTERFACE_MODE_RGMII_RXID || \ + iface == PHY_INTERFACE_MODE_RGMII_TXID) + +#define IS_PHY_IF_MODE_GBIT(iface) (IS_PHY_IF_MODE_RGMII(iface) || \ + iface == PHY_INTERFACE_MODE_GMII) + +struct sti_dwmac { + int interface; + bool ext_phyclk; + bool is_tx_retime_src_clk_125; + struct clk *clk; + int reg; + struct device *dev; + struct regmap *regmap; +}; + +static u32 phy_intf_sels[] = { + [PHY_INTERFACE_MODE_MII] = ETH_PHY_SEL_MII, + [PHY_INTERFACE_MODE_GMII] = ETH_PHY_SEL_GMII, + [PHY_INTERFACE_MODE_RGMII] = ETH_PHY_SEL_RGMII, + [PHY_INTERFACE_MODE_RGMII_ID] = ETH_PHY_SEL_RGMII, + [PHY_INTERFACE_MODE_SGMII] = ETH_PHY_SEL_SGMII, + [PHY_INTERFACE_MODE_RMII] = ETH_PHY_SEL_RMII, +}; + +enum { + TX_RETIME_SRC_NA = 0, + TX_RETIME_SRC_TXCLK = 1, + TX_RETIME_SRC_CLK_125, + TX_RETIME_SRC_PHYCLK, + TX_RETIME_SRC_CLKGEN, +}; + +static const char *const tx_retime_srcs[] = { + [TX_RETIME_SRC_NA] = "", + [TX_RETIME_SRC_TXCLK] = "txclk", + [TX_RETIME_SRC_CLK_125] = "clk_125", + [TX_RETIME_SRC_PHYCLK] = "phyclk", + [TX_RETIME_SRC_CLKGEN] = "clkgen", +}; + +static u32 tx_retime_val[] = { + [TX_RETIME_SRC_TXCLK] = ETH_SEL_TXCLK_NOT_CLK125, + [TX_RETIME_SRC_CLK_125] = 0x0, + [TX_RETIME_SRC_PHYCLK] = ETH_SEL_TX_RETIME_CLK, + [TX_RETIME_SRC_CLKGEN] = ETH_SEL_TX_RETIME_CLK | + ETH_SEL_INTERNAL_NOTEXT_PHYCLK, +}; + +static void setup_retime_src(struct sti_dwmac *dwmac, u32 spd) +{ + u32 src = 0, freq = 0; + + if (spd == SPEED_100) { + if (dwmac->interface == PHY_INTERFACE_MODE_MII || + dwmac->interface == PHY_INTERFACE_MODE_GMII) { + src = TX_RETIME_SRC_TXCLK; + } else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) { + if (dwmac->ext_phyclk) { + src = TX_RETIME_SRC_PHYCLK; + } else { + src = TX_RETIME_SRC_CLKGEN; + freq = 50000000; + } + + } else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) { + src = TX_RETIME_SRC_CLKGEN; + freq = 25000000; + } + + if (src == TX_RETIME_SRC_CLKGEN && dwmac->clk) + clk_set_rate(dwmac->clk, freq); + + } else if (spd == SPEED_1000) { + if (dwmac->is_tx_retime_src_clk_125) + src = TX_RETIME_SRC_CLK_125; + else + src = TX_RETIME_SRC_TXCLK; + } + + regmap_update_bits(dwmac->regmap, dwmac->reg, + TX_RETIME_SRC_MASK, tx_retime_val[src]); +} + +static void sti_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct sti_dwmac *dwmac = priv; + + if (dwmac->clk) + clk_disable_unprepare(dwmac->clk); +} + +static void sti_fix_mac_speed(void *priv, unsigned int spd) +{ + struct sti_dwmac *dwmac = priv; + + setup_retime_src(dwmac, spd); + + return; +} + +static int sti_dwmac_parse_data(struct sti_dwmac *dwmac, + struct platform_device *pdev) +{ + struct resource *res; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct regmap *regmap; + int err; + + if (!np) + return -EINVAL; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-ethconf"); + if (!res) + return -ENODATA; + + regmap = syscon_regmap_lookup_by_phandle(np, "st,syscon"); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + dwmac->dev = dev; + dwmac->interface = of_get_phy_mode(np); + dwmac->regmap = regmap; + dwmac->reg = res->start; + dwmac->ext_phyclk = of_property_read_bool(np, "st,ext-phyclk"); + dwmac->is_tx_retime_src_clk_125 = false; + + if (IS_PHY_IF_MODE_GBIT(dwmac->interface)) { + const char *rs; + + err = of_property_read_string(np, "st,tx-retime-src", &rs); + if (err < 0) { + dev_err(dev, "st,tx-retime-src not specified\n"); + return err; + } + + if (!strcasecmp(rs, "clk_125")) + dwmac->is_tx_retime_src_clk_125 = true; + } + + dwmac->clk = devm_clk_get(dev, "sti-ethclk"); + + if (IS_ERR(dwmac->clk)) + dwmac->clk = NULL; + + return 0; +} + +static int sti_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct sti_dwmac *dwmac = priv; + struct regmap *regmap = dwmac->regmap; + int iface = dwmac->interface; + u32 reg = dwmac->reg; + u32 val, spd; + + if (dwmac->clk) + clk_prepare_enable(dwmac->clk); + + regmap_update_bits(regmap, reg, MII_PHY_SEL_MASK, phy_intf_sels[iface]); + + val = (iface == PHY_INTERFACE_MODE_REVMII) ? 0 : ENMII; + regmap_update_bits(regmap, reg, ENMII_MASK, val); + + if (IS_PHY_IF_MODE_GBIT(iface)) + spd = SPEED_1000; + else + spd = SPEED_100; + + setup_retime_src(dwmac, spd); + + return 0; +} + +static void *sti_dwmac_setup(struct platform_device *pdev) +{ + struct sti_dwmac *dwmac; + int ret; + + dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL); + if (!dwmac) + return ERR_PTR(-ENOMEM); + + ret = sti_dwmac_parse_data(dwmac, pdev); + if (ret) { + dev_err(&pdev->dev, "Unable to parse OF data\n"); + return ERR_PTR(ret); + } + + return dwmac; +} + +const struct stmmac_of_data sti_gmac_data = { + .fix_mac_speed = sti_fix_mac_speed, + .setup = sti_dwmac_setup, + .init = sti_dwmac_init, + .exit = sti_dwmac_exit, +}; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index d9af26ed58ee..f9e60d7918c4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -133,6 +133,9 @@ bool stmmac_eee_init(struct stmmac_priv *priv); #ifdef CONFIG_DWMAC_SUNXI extern const struct stmmac_of_data sun7i_gmac_data; #endif +#ifdef CONFIG_DWMAC_STI +extern const struct stmmac_of_data sti_gmac_data; +#endif extern struct platform_driver stmmac_pltfr_driver; static inline int stmmac_register_platform(void) { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 5884a7d2063b..c61bc72b8e90 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -33,6 +33,11 @@ static const struct of_device_id stmmac_dt_ids[] = { #ifdef CONFIG_DWMAC_SUNXI { .compatible = "allwinner,sun7i-a20-gmac", .data = &sun7i_gmac_data}, #endif +#ifdef CONFIG_DWMAC_STI + { .compatible = "st,stih415-dwmac", .data = &sti_gmac_data}, + { .compatible = "st,stih416-dwmac", .data = &sti_gmac_data}, + { .compatible = "st,stih127-dwmac", .data = &sti_gmac_data}, +#endif /* SoC specific glue layers should come before generic bindings */ { .compatible = "st,spear600-gmac"}, { .compatible = "snps,dwmac-3.610"}, diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 1d860ce914ed..651087b5c8da 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -554,7 +554,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable) * common for both the interface as the interface shares * the same hardware resource. */ - for (i = 0; i <= priv->data.slaves; i++) + for (i = 0; i < priv->data.slaves; i++) if (priv->slaves[i].ndev->flags & IFF_PROMISC) flag = true; @@ -578,7 +578,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable) unsigned long timeout = jiffies + HZ; /* Disable Learn for all ports */ - for (i = 0; i <= priv->data.slaves; i++) { + for (i = 0; i < priv->data.slaves; i++) { cpsw_ale_control_set(ale, i, ALE_PORT_NOLEARN, 1); cpsw_ale_control_set(ale, i, @@ -606,7 +606,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable) cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0); /* Enable Learn for all ports */ - for (i = 0; i <= priv->data.slaves; i++) { + for (i = 0; i < priv->data.slaves; i++) { cpsw_ale_control_set(ale, i, ALE_PORT_NOLEARN, 0); cpsw_ale_control_set(ale, i, @@ -1896,6 +1896,11 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN); slave_data->phy_if = of_get_phy_mode(slave_node); + if (slave_data->phy_if < 0) { + pr_err("Missing or malformed slave[%d] phy-mode property\n", + i); + return slave_data->phy_if; + } if (data->dual_emac) { if (of_property_read_u32(slave_node, "dual_emac_res_vlan", diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c index 023237a65720..17503da9f7a5 100644 --- a/drivers/net/ethernet/tile/tilegx.c +++ b/drivers/net/ethernet/tile/tilegx.c @@ -2071,7 +2071,7 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev) /* Return subqueue id on this core (one per core). */ static u16 tile_net_select_queue(struct net_device *dev, struct sk_buff *skb, - void *accel_priv) + void *accel_priv, select_queue_fallback_t fallback) { return smp_processor_id(); } diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 1ec65feebb9e..4bfdf8c7ada0 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -26,6 +26,7 @@ #include <linux/netdevice.h> #include <linux/of_mdio.h> #include <linux/of_platform.h> +#include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/skbuff.h> #include <linux/spinlock.h> @@ -600,7 +601,8 @@ static void axienet_start_xmit_done(struct net_device *ndev) size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; packets++; - lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM; + ++lp->tx_bd_ci; + lp->tx_bd_ci %= TX_BD_NUM; cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; status = cur_p->status; } @@ -686,7 +688,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) skb_headlen(skb), DMA_TO_DEVICE); for (ii = 0; ii < num_frag; ii++) { - lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM; + ++lp->tx_bd_tail; + lp->tx_bd_tail %= TX_BD_NUM; cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; frag = &skb_shinfo(skb)->frags[ii]; cur_p->phys = dma_map_single(ndev->dev.parent, @@ -702,7 +705,8 @@ static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; /* Start the transfer */ axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p); - lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM; + ++lp->tx_bd_tail; + lp->tx_bd_tail %= TX_BD_NUM; return NETDEV_TX_OK; } @@ -774,7 +778,8 @@ static void axienet_recv(struct net_device *ndev) cur_p->status = 0; cur_p->sw_id_offset = (u32) new_skb; - lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM; + ++lp->rx_bd_ci; + lp->rx_bd_ci %= RX_BD_NUM; cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; } |
