diff options
Diffstat (limited to 'drivers/net/ethernet/ti/davinci_emac.c')
| -rw-r--r-- | drivers/net/ethernet/ti/davinci_emac.c | 2047 |
1 files changed, 2047 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c new file mode 100644 index 000000000000..3f451e4d8361 --- /dev/null +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -0,0 +1,2047 @@ +/* + * DaVinci Ethernet Medium Access Controller + * + * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine + * + * Copyright (C) 2009 Texas Instruments. + * + * --------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * --------------------------------------------------------------------------- + * History: + * 0-5 A number of folks worked on this driver in bits and pieces but the major + * contribution came from Suraj Iyer and Anant Gole + * 6.0 Anant Gole - rewrote the driver as per Linux conventions + * 6.1 Chaithrika U S - added support for Gigabit and RMII features, + * PHY layer usage + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/in.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/highmem.h> +#include <linux/proc_fs.h> +#include <linux/ctype.h> +#include <linux/spinlock.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/semaphore.h> +#include <linux/phy.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/davinci_emac.h> + +#include <asm/irq.h> +#include <asm/page.h> + +#include "davinci_cpdma.h" + +static int debug_level; +module_param(debug_level, int, 0); +MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); + +/* Netif debug messages possible */ +#define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | \ + NETIF_MSG_IFDOWN | \ + NETIF_MSG_IFUP | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR | \ + NETIF_MSG_TX_QUEUED | \ + NETIF_MSG_INTR | \ + NETIF_MSG_TX_DONE | \ + NETIF_MSG_RX_STATUS | \ + NETIF_MSG_PKTDATA | \ + NETIF_MSG_HW | \ + NETIF_MSG_WOL) + +/* version info */ +#define EMAC_MAJOR_VERSION 6 +#define EMAC_MINOR_VERSION 1 +#define EMAC_MODULE_VERSION "6.1" +MODULE_VERSION(EMAC_MODULE_VERSION); +static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; + +/* Configuration items */ +#define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */ +#define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ +#define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ +#define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ +#define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ +#define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ +#define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */ +#define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */ +#define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ +#define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ +#define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ +#define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */ + +#define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */ +#define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/ + +#define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */ +#define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */ +#define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) +#define EMAC_DEF_TX_CH (0) /* Default 0th channel */ +#define EMAC_DEF_RX_CH (0) /* Default 0th channel */ +#define EMAC_DEF_RX_NUM_DESC (128) +#define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ +#define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ +#define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ + +/* Buffer descriptor parameters */ +#define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */ +#define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */ + +/* EMAC register related defines */ +#define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) +#define EMAC_NUM_MULTICAST_BITS (64) +#define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) +#define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) +#define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) +#define EMAC_RX_UNICAST_CLEAR_ALL (0xFF) +#define EMAC_INT_MASK_CLEAR (0xFF) + +/* RX MBP register bit positions */ +#define EMAC_RXMBP_PASSCRC_MASK BIT(30) +#define EMAC_RXMBP_QOSEN_MASK BIT(29) +#define EMAC_RXMBP_NOCHAIN_MASK BIT(28) +#define EMAC_RXMBP_CMFEN_MASK BIT(24) +#define EMAC_RXMBP_CSFEN_MASK BIT(23) +#define EMAC_RXMBP_CEFEN_MASK BIT(22) +#define EMAC_RXMBP_CAFEN_MASK BIT(21) +#define EMAC_RXMBP_PROMCH_SHIFT (16) +#define EMAC_RXMBP_PROMCH_MASK (0x7 << 16) +#define EMAC_RXMBP_BROADEN_MASK BIT(13) +#define EMAC_RXMBP_BROADCH_SHIFT (8) +#define EMAC_RXMBP_BROADCH_MASK (0x7 << 8) +#define EMAC_RXMBP_MULTIEN_MASK BIT(5) +#define EMAC_RXMBP_MULTICH_SHIFT (0) +#define EMAC_RXMBP_MULTICH_MASK (0x7) +#define EMAC_RXMBP_CHMASK (0x7) + +/* EMAC register definitions/bit maps used */ +# define EMAC_MBP_RXPROMISC (0x00200000) +# define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16) +# define EMAC_MBP_RXBCAST (0x00002000) +# define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8) +# define EMAC_MBP_RXMCAST (0x00000020) +# define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) + +/* EMAC mac_control register */ +#define EMAC_MACCONTROL_TXPTYPE BIT(9) +#define EMAC_MACCONTROL_TXPACEEN BIT(6) +#define EMAC_MACCONTROL_GMIIEN BIT(5) +#define EMAC_MACCONTROL_GIGABITEN BIT(7) +#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) +#define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) + +/* GIGABIT MODE related bits */ +#define EMAC_DM646X_MACCONTORL_GIG BIT(7) +#define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) + +/* EMAC mac_status register */ +#define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000) +#define EMAC_MACSTATUS_TXERRCODE_SHIFT (20) +#define EMAC_MACSTATUS_TXERRCH_MASK (0x7) +#define EMAC_MACSTATUS_TXERRCH_SHIFT (16) +#define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000) +#define EMAC_MACSTATUS_RXERRCODE_SHIFT (12) +#define EMAC_MACSTATUS_RXERRCH_MASK (0x7) +#define EMAC_MACSTATUS_RXERRCH_SHIFT (8) + +/* EMAC RX register masks */ +#define EMAC_RX_MAX_LEN_MASK (0xFFFF) +#define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) + +/* MAC_IN_VECTOR (0x180) register bit fields */ +#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) +#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) +#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) +#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) + +/** NOTE:: For DM646x the IN_VECTOR has changed */ +#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) +#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH) +#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) +#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) + +/* CPPI bit positions */ +#define EMAC_CPPI_SOP_BIT BIT(31) +#define EMAC_CPPI_EOP_BIT BIT(30) +#define EMAC_CPPI_OWNERSHIP_BIT BIT(29) +#define EMAC_CPPI_EOQ_BIT BIT(28) +#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27) +#define EMAC_CPPI_PASS_CRC_BIT BIT(26) +#define EMAC_RX_BD_BUF_SIZE (0xFFFF) +#define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */ +#define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF) + +/* Max hardware defines */ +#define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */ +#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ + +/* EMAC Peripheral Device Register Memory Layout structure */ +#define EMAC_MACINVECTOR 0x90 + +#define EMAC_DM646X_MACEOIVECTOR 0x94 + +#define EMAC_MACINTSTATRAW 0xB0 +#define EMAC_MACINTSTATMASKED 0xB4 +#define EMAC_MACINTMASKSET 0xB8 +#define EMAC_MACINTMASKCLEAR 0xBC + +#define EMAC_RXMBPENABLE 0x100 +#define EMAC_RXUNICASTSET 0x104 +#define EMAC_RXUNICASTCLEAR 0x108 +#define EMAC_RXMAXLEN 0x10C +#define EMAC_RXBUFFEROFFSET 0x110 +#define EMAC_RXFILTERLOWTHRESH 0x114 + +#define EMAC_MACCONTROL 0x160 +#define EMAC_MACSTATUS 0x164 +#define EMAC_EMCONTROL 0x168 +#define EMAC_FIFOCONTROL 0x16C +#define EMAC_MACCONFIG 0x170 +#define EMAC_SOFTRESET 0x174 +#define EMAC_MACSRCADDRLO 0x1D0 +#define EMAC_MACSRCADDRHI 0x1D4 +#define EMAC_MACHASH1 0x1D8 +#define EMAC_MACHASH2 0x1DC +#define EMAC_MACADDRLO 0x500 +#define EMAC_MACADDRHI 0x504 +#define EMAC_MACINDEX 0x508 + +/* EMAC statistics registers */ +#define EMAC_RXGOODFRAMES 0x200 +#define EMAC_RXBCASTFRAMES 0x204 +#define EMAC_RXMCASTFRAMES 0x208 +#define EMAC_RXPAUSEFRAMES 0x20C +#define EMAC_RXCRCERRORS 0x210 +#define EMAC_RXALIGNCODEERRORS 0x214 +#define EMAC_RXOVERSIZED 0x218 +#define EMAC_RXJABBER 0x21C +#define EMAC_RXUNDERSIZED 0x220 +#define EMAC_RXFRAGMENTS 0x224 +#define EMAC_RXFILTERED 0x228 +#define EMAC_RXQOSFILTERED 0x22C +#define EMAC_RXOCTETS 0x230 +#define EMAC_TXGOODFRAMES 0x234 +#define EMAC_TXBCASTFRAMES 0x238 +#define EMAC_TXMCASTFRAMES 0x23C +#define EMAC_TXPAUSEFRAMES 0x240 +#define EMAC_TXDEFERRED 0x244 +#define EMAC_TXCOLLISION 0x248 +#define EMAC_TXSINGLECOLL 0x24C +#define EMAC_TXMULTICOLL 0x250 +#define EMAC_TXEXCESSIVECOLL 0x254 +#define EMAC_TXLATECOLL 0x258 +#define EMAC_TXUNDERRUN 0x25C +#define EMAC_TXCARRIERSENSE 0x260 +#define EMAC_TXOCTETS 0x264 +#define EMAC_NETOCTETS 0x280 +#define EMAC_RXSOFOVERRUNS 0x284 +#define EMAC_RXMOFOVERRUNS 0x288 +#define EMAC_RXDMAOVERRUNS 0x28C + +/* EMAC DM644x control registers */ +#define EMAC_CTRL_EWCTL (0x4) +#define EMAC_CTRL_EWINTTCNT (0x8) + +/* EMAC DM644x control module masks */ +#define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF +#define EMAC_DM644X_INTMIN_INTVL 0x1 +#define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK) + +/* EMAC DM646X control module registers */ +#define EMAC_DM646X_CMINTCTRL 0x0C +#define EMAC_DM646X_CMRXINTEN 0x14 +#define EMAC_DM646X_CMTXINTEN 0x18 +#define EMAC_DM646X_CMRXINTMAX 0x70 +#define EMAC_DM646X_CMTXINTMAX 0x74 + +/* EMAC DM646X control module masks */ +#define EMAC_DM646X_INTPACEEN (0x3 << 16) +#define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0) +#define EMAC_DM646X_CMINTMAX_CNT 63 +#define EMAC_DM646X_CMINTMIN_CNT 2 +#define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT) +#define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1) + + +/* EMAC EOI codes for C0 */ +#define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) +#define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) + +/* EMAC Stats Clear Mask */ +#define EMAC_STATS_CLR_MASK (0xFFFFFFFF) + +/* emac_priv: EMAC private data structure + * + * EMAC adapter private data structure + */ +struct emac_priv { + u32 msg_enable; + struct net_device *ndev; + struct platform_device *pdev; + struct napi_struct napi; + char mac_addr[6]; + void __iomem *remap_addr; + u32 emac_base_phys; + void __iomem *emac_base; + void __iomem *ctrl_base; + struct cpdma_ctlr *dma; + struct cpdma_chan *txchan; + struct cpdma_chan *rxchan; + u32 link; /* 1=link on, 0=link off */ + u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ + u32 duplex; /* Link duplex: 0=Half, 1=Full */ + u32 rx_buf_size; + u32 isr_count; + u32 coal_intvl; + u32 bus_freq_mhz; + u8 rmii_en; + u8 version; + u32 mac_hash1; + u32 mac_hash2; + u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; + u32 rx_addr_type; + const char *phy_id; + struct phy_device *phydev; + spinlock_t lock; + /*platform specific members*/ + void (*int_enable) (void); + void (*int_disable) (void); +}; + +/* clock frequency for EMAC */ +static struct clk *emac_clk; +static unsigned long emac_bus_frequency; + +/* EMAC TX Host Error description strings */ +static char *emac_txhost_errcodes[16] = { + "No error", "SOP error", "Ownership bit not set in SOP buffer", + "Zero Next Buffer Descriptor Pointer Without EOP", + "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error", + "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", + "Reserved", "Reserved", "Reserved", "Reserved" +}; + +/* EMAC RX Host Error description strings */ +static char *emac_rxhost_errcodes[16] = { + "No error", "Reserved", "Ownership bit not set in input buffer", + "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved", + "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", + "Reserved", "Reserved", "Reserved", "Reserved" +}; + +/* Helper macros */ +#define emac_read(reg) ioread32(priv->emac_base + (reg)) +#define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg)) + +#define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) +#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) + +/** + * emac_dump_regs: Dump important EMAC registers to debug terminal + * @priv: The DaVinci EMAC private adapter structure + * + * Executes ethtool set cmd & sets phy mode + * + */ +static void emac_dump_regs(struct emac_priv *priv) +{ + struct device *emac_dev = &priv->ndev->dev; + + /* Print important registers in EMAC */ + dev_info(emac_dev, "EMAC Basic registers\n"); + if (priv->version == EMAC_VERSION_1) { + dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n", + emac_ctrl_read(EMAC_CTRL_EWCTL), + emac_ctrl_read(EMAC_CTRL_EWINTTCNT)); + } + dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n", + emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL)); + dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\ + "RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE), + emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN)); + dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\ + "MacConfig=%08X\n", emac_read(EMAC_MACCONTROL), + emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG)); + dev_info(emac_dev, "EMAC Statistics\n"); + dev_info(emac_dev, "EMAC: rx_good_frames:%d\n", + emac_read(EMAC_RXGOODFRAMES)); + dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n", + emac_read(EMAC_RXBCASTFRAMES)); + dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n", + emac_read(EMAC_RXMCASTFRAMES)); + dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n", + emac_read(EMAC_RXPAUSEFRAMES)); + dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n", + emac_read(EMAC_RXCRCERRORS)); + dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n", + emac_read(EMAC_RXALIGNCODEERRORS)); + dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n", + emac_read(EMAC_RXOVERSIZED)); + dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n", + emac_read(EMAC_RXJABBER)); + dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n", + emac_read(EMAC_RXUNDERSIZED)); + dev_info(emac_dev, "EMAC: rx_fragments:%d\n", + emac_read(EMAC_RXFRAGMENTS)); + dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n", + emac_read(EMAC_RXFILTERED)); + dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n", + emac_read(EMAC_RXQOSFILTERED)); + dev_info(emac_dev, "EMAC: rx_octets:%d\n", + emac_read(EMAC_RXOCTETS)); + dev_info(emac_dev, "EMAC: tx_goodframes:%d\n", + emac_read(EMAC_TXGOODFRAMES)); + dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n", + emac_read(EMAC_TXBCASTFRAMES)); + dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n", + emac_read(EMAC_TXMCASTFRAMES)); + dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n", + emac_read(EMAC_TXPAUSEFRAMES)); + dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n", + emac_read(EMAC_TXDEFERRED)); + dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n", + emac_read(EMAC_TXCOLLISION)); + dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n", + emac_read(EMAC_TXSINGLECOLL)); + dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n", + emac_read(EMAC_TXMULTICOLL)); + dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n", + emac_read(EMAC_TXEXCESSIVECOLL)); + dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n", + emac_read(EMAC_TXLATECOLL)); + dev_info(emac_dev, "EMAC: tx_underrun:%d\n", + emac_read(EMAC_TXUNDERRUN)); + dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n", + emac_read(EMAC_TXCARRIERSENSE)); + dev_info(emac_dev, "EMAC: tx_octets:%d\n", + emac_read(EMAC_TXOCTETS)); + dev_info(emac_dev, "EMAC: net_octets:%d\n", + emac_read(EMAC_NETOCTETS)); + dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n", + emac_read(EMAC_RXSOFOVERRUNS)); + dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n", + emac_read(EMAC_RXMOFOVERRUNS)); + dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n", + emac_read(EMAC_RXDMAOVERRUNS)); + + cpdma_ctlr_dump(priv->dma); +} + +/** + * emac_get_drvinfo: Get EMAC driver information + * @ndev: The DaVinci EMAC network adapter + * @info: ethtool info structure containing name and version + * + * Returns EMAC driver information (name and version) + * + */ +static void emac_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, emac_version_string); + strcpy(info->version, EMAC_MODULE_VERSION); +} + +/** + * emac_get_settings: Get EMAC settings + * @ndev: The DaVinci EMAC network adapter + * @ecmd: ethtool command + * + * Executes ethool get command + * + */ +static int emac_get_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct emac_priv *priv = netdev_priv(ndev); + if (priv->phydev) + return phy_ethtool_gset(priv->phydev, ecmd); + else + return -EOPNOTSUPP; + +} + +/** + * emac_set_settings: Set EMAC settings + * @ndev: The DaVinci EMAC network adapter + * @ecmd: ethtool command + * + * Executes ethool set command + * + */ +static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) +{ + struct emac_priv *priv = netdev_priv(ndev); + if (priv->phydev) + return phy_ethtool_sset(priv->phydev, ecmd); + else + return -EOPNOTSUPP; + +} + +/** + * emac_get_coalesce : Get interrupt coalesce settings for this device + * @ndev : The DaVinci EMAC network adapter + * @coal : ethtool coalesce settings structure + * + * Fetch the current interrupt coalesce settings + * + */ +static int emac_get_coalesce(struct net_device *ndev, + struct ethtool_coalesce *coal) +{ + struct emac_priv *priv = netdev_priv(ndev); + + coal->rx_coalesce_usecs = priv->coal_intvl; + return 0; + +} + +/** + * emac_set_coalesce : Set interrupt coalesce settings for this device + * @ndev : The DaVinci EMAC network adapter + * @coal : ethtool coalesce settings structure + * + * Set interrupt coalesce parameters + * + */ +static int emac_set_coalesce(struct net_device *ndev, + struct ethtool_coalesce *coal) +{ + struct emac_priv *priv = netdev_priv(ndev); + u32 int_ctrl, num_interrupts = 0; + u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0; + + if (!coal->rx_coalesce_usecs) + return -EINVAL; + + coal_intvl = coal->rx_coalesce_usecs; + + switch (priv->version) { + case EMAC_VERSION_2: + int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL); + prescale = priv->bus_freq_mhz * 4; + + if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL) + coal_intvl = EMAC_DM646X_CMINTMIN_INTVL; + + if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) { + /* + * Interrupt pacer works with 4us Pulse, we can + * throttle further by dilating the 4us pulse. + */ + addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale; + + if (addnl_dvdr > 1) { + prescale *= addnl_dvdr; + if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL + * addnl_dvdr)) + coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL + * addnl_dvdr); + } else { + addnl_dvdr = 1; + coal_intvl = EMAC_DM646X_CMINTMAX_INTVL; + } + } + + num_interrupts = (1000 * addnl_dvdr) / coal_intvl; + + int_ctrl |= EMAC_DM646X_INTPACEEN; + int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK); + int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK); + emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl); + + emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts); + emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts); + + break; + default: + int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT); + int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK); + prescale = coal_intvl * priv->bus_freq_mhz; + if (prescale > EMAC_DM644X_EWINTCNT_MASK) { + prescale = EMAC_DM644X_EWINTCNT_MASK; + coal_intvl = prescale / priv->bus_freq_mhz; + } + emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale)); + + break; + } + + printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl); + priv->coal_intvl = coal_intvl; + + return 0; + +} + + +/** + * ethtool_ops: DaVinci EMAC Ethtool structure + * + * Ethtool support for EMAC adapter + * + */ +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = emac_get_drvinfo, + .get_settings = emac_get_settings, + .set_settings = emac_set_settings, + .get_link = ethtool_op_get_link, + .get_coalesce = emac_get_coalesce, + .set_coalesce = emac_set_coalesce, +}; + +/** + * emac_update_phystatus: Update Phy status + * @priv: The DaVinci EMAC private adapter structure + * + * Updates phy status and takes action for network queue if required + * based upon link status + * + */ +static void emac_update_phystatus(struct emac_priv *priv) +{ + u32 mac_control; + u32 new_duplex; + u32 cur_duplex; + struct net_device *ndev = priv->ndev; + + mac_control = emac_read(EMAC_MACCONTROL); + cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? + DUPLEX_FULL : DUPLEX_HALF; + if (priv->phydev) + new_duplex = priv->phydev->duplex; + else + new_duplex = DUPLEX_FULL; + + /* We get called only if link has changed (speed/duplex/status) */ + if ((priv->link) && (new_duplex != cur_duplex)) { + priv->duplex = new_duplex; + if (DUPLEX_FULL == priv->duplex) + mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN); + else + mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN); + } + + if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { + mac_control = emac_read(EMAC_MACCONTROL); + mac_control |= (EMAC_DM646X_MACCONTORL_GIG | + EMAC_DM646X_MACCONTORL_GIGFORCE); + } else { + /* Clear the GIG bit and GIGFORCE bit */ + mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE | + EMAC_DM646X_MACCONTORL_GIG); + + if (priv->rmii_en && (priv->speed == SPEED_100)) + mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK; + else + mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK; + } + + /* Update mac_control if changed */ + emac_write(EMAC_MACCONTROL, mac_control); + + if (priv->link) { + /* link ON */ + if (!netif_carrier_ok(ndev)) + netif_carrier_on(ndev); + /* reactivate the transmit queue if it is stopped */ + if (netif_running(ndev) && netif_queue_stopped(ndev)) + netif_wake_queue(ndev); + } else { + /* link OFF */ + if (netif_carrier_ok(ndev)) + netif_carrier_off(ndev); + if (!netif_queue_stopped(ndev)) + netif_stop_queue(ndev); + } +} + +/** + * hash_get: Calculate hash value from mac address + * @addr: mac address to delete from hash table + * + * Calculates hash value from mac address + * + */ +static u32 hash_get(u8 *addr) +{ + u32 hash; + u8 tmpval; + int cnt; + hash = 0; + + for (cnt = 0; cnt < 2; cnt++) { + tmpval = *addr++; + hash ^= (tmpval >> 2) ^ (tmpval << 4); + tmpval = *addr++; + hash ^= (tmpval >> 4) ^ (tmpval << 2); + tmpval = *addr++; + hash ^= (tmpval >> 6) ^ (tmpval); + } + + return hash & 0x3F; +} + +/** + * hash_add: Hash function to add mac addr from hash table + * @priv: The DaVinci EMAC private adapter structure + * mac_addr: mac address to delete from hash table + * + * Adds mac address to the internal hash table + * + */ +static int hash_add(struct emac_priv *priv, u8 *mac_addr) +{ + struct device *emac_dev = &priv->ndev->dev; + u32 rc = 0; + u32 hash_bit; + u32 hash_value = hash_get(mac_addr); + + if (hash_value >= EMAC_NUM_MULTICAST_BITS) { + if (netif_msg_drv(priv)) { + dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\ + "Hash %08x, should not be greater than %08x", + hash_value, (EMAC_NUM_MULTICAST_BITS - 1)); + } + return -1; + } + + /* set the hash bit only if not previously set */ + if (priv->multicast_hash_cnt[hash_value] == 0) { + rc = 1; /* hash value changed */ + if (hash_value < 32) { + hash_bit = BIT(hash_value); + priv->mac_hash1 |= hash_bit; + } else { + hash_bit = BIT((hash_value - 32)); + priv->mac_hash2 |= hash_bit; + } + } + + /* incr counter for num of mcast addr's mapped to "this" hash bit */ + ++priv->multicast_hash_cnt[hash_value]; + + return rc; +} + +/** + * hash_del: Hash function to delete mac addr from hash table + * @priv: The DaVinci EMAC private adapter structure + * mac_addr: mac address to delete from hash table + * + * Removes mac address from the internal hash table + * + */ +static int hash_del(struct emac_priv *priv, u8 *mac_addr) +{ + u32 hash_value; + u32 hash_bit; + + hash_value = hash_get(mac_addr); + if (priv->multicast_hash_cnt[hash_value] > 0) { + /* dec cntr for num of mcast addr's mapped to this hash bit */ + --priv->multicast_hash_cnt[hash_value]; + } + + /* if counter still > 0, at least one multicast address refers + * to this hash bit. so return 0 */ + if (priv->multicast_hash_cnt[hash_value] > 0) + return 0; + + if (hash_value < 32) { + hash_bit = BIT(hash_value); + priv->mac_hash1 &= ~hash_bit; + } else { + hash_bit = BIT((hash_value - 32)); + priv->mac_hash2 &= ~hash_bit; + } + + /* return 1 to indicate change in mac_hash registers reqd */ + return 1; +} + +/* EMAC multicast operation */ +#define EMAC_MULTICAST_ADD 0 +#define EMAC_MULTICAST_DEL 1 +#define EMAC_ALL_MULTI_SET 2 +#define EMAC_ALL_MULTI_CLR 3 + +/** + * emac_add_mcast: Set multicast address in the EMAC adapter (Internal) + * @priv: The DaVinci EMAC private adapter structure + * @action: multicast operation to perform + * mac_addr: mac address to set + * + * Set multicast addresses in EMAC adapter - internal function + * + */ +static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) +{ + struct device *emac_dev = &priv->ndev->dev; + int update = -1; + + switch (action) { + case EMAC_MULTICAST_ADD: + update = hash_add(priv, mac_addr); + break; + case EMAC_MULTICAST_DEL: + update = hash_del(priv, mac_addr); + break; + case EMAC_ALL_MULTI_SET: + update = 1; + priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE; + priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE; + break; + case EMAC_ALL_MULTI_CLR: + update = 1; + priv->mac_hash1 = 0; + priv->mac_hash2 = 0; + memset(&(priv->multicast_hash_cnt[0]), 0, + sizeof(priv->multicast_hash_cnt[0]) * + EMAC_NUM_MULTICAST_BITS); + break; + default: + if (netif_msg_drv(priv)) + dev_err(emac_dev, "DaVinci EMAC: add_mcast"\ + ": bad operation %d", action); + break; + } + + /* write to the hardware only if the register status chances */ + if (update > 0) { + emac_write(EMAC_MACHASH1, priv->mac_hash1); + emac_write(EMAC_MACHASH2, priv->mac_hash2); + } +} + +/** + * emac_dev_mcast_set: Set multicast address in the EMAC adapter + * @ndev: The DaVinci EMAC network adapter + * + * Set multicast addresses in EMAC adapter + * + */ +static void emac_dev_mcast_set(struct net_device *ndev) +{ + u32 mbp_enable; + struct emac_priv *priv = netdev_priv(ndev); + + mbp_enable = emac_read(EMAC_RXMBPENABLE); + if (ndev->flags & IFF_PROMISC) { + mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH)); + mbp_enable |= (EMAC_MBP_RXPROMISC); + } else { + mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC); + if ((ndev->flags & IFF_ALLMULTI) || + netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) { + mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); + emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); + } + if (!netdev_mc_empty(ndev)) { + struct netdev_hw_addr *ha; + + mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); + emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); + /* program multicast address list into EMAC hardware */ + netdev_for_each_mc_addr(ha, ndev) { + emac_add_mcast(priv, EMAC_MULTICAST_ADD, + (u8 *) ha->addr); + } + } else { + mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST); + emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); + } + } + /* Set mbp config register */ + emac_write(EMAC_RXMBPENABLE, mbp_enable); +} + +/************************************************************************* + * EMAC Hardware manipulation + *************************************************************************/ + +/** + * emac_int_disable: Disable EMAC module interrupt (from adapter) + * @priv: The DaVinci EMAC private adapter structure + * + * Disable EMAC interrupt on the adapter + * + */ +static void emac_int_disable(struct emac_priv *priv) +{ + if (priv->version == EMAC_VERSION_2) { + unsigned long flags; + + local_irq_save(flags); + + /* Program C0_Int_En to zero to turn off + * interrupts to the CPU */ + emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0); + emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0); + /* NOTE: Rx Threshold and Misc interrupts are not disabled */ + if (priv->int_disable) + priv->int_disable(); + + local_irq_restore(flags); + + } else { + /* Set DM644x control registers for interrupt control */ + emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0); + } +} + +/** + * emac_int_enable: Enable EMAC module interrupt (from adapter) + * @priv: The DaVinci EMAC private adapter structure + * + * Enable EMAC interrupt on the adapter + * + */ +static void emac_int_enable(struct emac_priv *priv) +{ + if (priv->version == EMAC_VERSION_2) { + if (priv->int_enable) + priv->int_enable(); + + emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff); + emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff); + + /* In addition to turning on interrupt Enable, we need + * ack by writing appropriate values to the EOI + * register */ + + /* NOTE: Rx Threshold and Misc interrupts are not enabled */ + + /* ack rxen only then a new pulse will be generated */ + emac_write(EMAC_DM646X_MACEOIVECTOR, + EMAC_DM646X_MAC_EOI_C0_RXEN); + + /* ack txen- only then a new pulse will be generated */ + emac_write(EMAC_DM646X_MACEOIVECTOR, + EMAC_DM646X_MAC_EOI_C0_TXEN); + + } else { + /* Set DM644x control registers for interrupt control */ + emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1); + } +} + +/** + * emac_irq: EMAC interrupt handler + * @irq: interrupt number + * @dev_id: EMAC network adapter data structure ptr + * + * EMAC Interrupt handler - we only schedule NAPI and not process any packets + * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function + * + * Returns interrupt handled condition + */ +static irqreturn_t emac_irq(int irq, void *dev_id) +{ + struct net_device *ndev = (struct net_device *)dev_id; + struct emac_priv *priv = netdev_priv(ndev); + + ++priv->isr_count; + if (likely(netif_running(priv->ndev))) { + emac_int_disable(priv); + napi_schedule(&priv->napi); + } else { + /* we are closing down, so dont process anything */ + } + return IRQ_HANDLED; +} + +static struct sk_buff *emac_rx_alloc(struct emac_priv *priv) +{ + struct sk_buff *skb = dev_alloc_skb(priv->rx_buf_size); + if (WARN_ON(!skb)) + return NULL; + skb->dev = priv->ndev; + skb_reserve(skb, NET_IP_ALIGN); + return skb; +} + +static void emac_rx_handler(void *token, int len, int status) +{ + struct sk_buff *skb = token; + struct net_device *ndev = skb->dev; + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &ndev->dev; + int ret; + + /* free and bail if we are shutting down */ + if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) { + dev_kfree_skb_any(skb); + return; + } + + /* recycle on receive error */ + if (status < 0) { + ndev->stats.rx_errors++; + goto recycle; + } + + /* feed received packet up the stack */ + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, ndev); + netif_receive_skb(skb); + ndev->stats.rx_bytes += len; + ndev->stats.rx_packets++; + + /* alloc a new packet for receive */ + skb = emac_rx_alloc(priv); + if (!skb) { + if (netif_msg_rx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "failed rx buffer alloc\n"); + return; + } + +recycle: + ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, + skb_tailroom(skb), GFP_KERNEL); + if (WARN_ON(ret < 0)) + dev_kfree_skb_any(skb); +} + +static void emac_tx_handler(void *token, int len, int status) +{ + struct sk_buff *skb = token; + struct net_device *ndev = skb->dev; + + if (unlikely(netif_queue_stopped(ndev))) + netif_start_queue(ndev); + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += len; + dev_kfree_skb_any(skb); +} + +/** + * emac_dev_xmit: EMAC Transmit function + * @skb: SKB pointer + * @ndev: The DaVinci EMAC network adapter + * + * Called by the system to transmit a packet - we queue the packet in + * EMAC hardware transmit queue + * + * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) + */ +static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct device *emac_dev = &ndev->dev; + int ret_code; + struct emac_priv *priv = netdev_priv(ndev); + + /* If no link, return */ + if (unlikely(!priv->link)) { + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); + goto fail_tx; + } + + ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE); + if (unlikely(ret_code < 0)) { + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: packet pad failed"); + goto fail_tx; + } + + skb_tx_timestamp(skb); + + ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len, + GFP_KERNEL); + if (unlikely(ret_code != 0)) { + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: desc submit failed"); + goto fail_tx; + } + + return NETDEV_TX_OK; + +fail_tx: + ndev->stats.tx_dropped++; + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; +} + +/** + * emac_dev_tx_timeout: EMAC Transmit timeout function + * @ndev: The DaVinci EMAC network adapter + * + * Called when system detects that a skb timeout period has expired + * potentially due to a fault in the adapter in not being able to send + * it out on the wire. We teardown the TX channel assuming a hardware + * error and re-initialize the TX channel for hardware operation + * + */ +static void emac_dev_tx_timeout(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &ndev->dev; + + if (netif_msg_tx_err(priv)) + dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); + + emac_dump_regs(priv); + + ndev->stats.tx_errors++; + emac_int_disable(priv); + cpdma_chan_stop(priv->txchan); + cpdma_chan_start(priv->txchan); + emac_int_enable(priv); +} + +/** + * emac_set_type0addr: Set EMAC Type0 mac address + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * + * Called internally to set Type0 mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) +{ + u32 val; + val = ((mac_addr[5] << 8) | (mac_addr[4])); + emac_write(EMAC_MACSRCADDRLO, val); + + val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0])); + emac_write(EMAC_MACSRCADDRHI, val); + val = emac_read(EMAC_RXUNICASTSET); + val |= BIT(ch); + emac_write(EMAC_RXUNICASTSET, val); + val = emac_read(EMAC_RXUNICASTCLEAR); + val &= ~BIT(ch); + emac_write(EMAC_RXUNICASTCLEAR, val); +} + +/** + * emac_set_type1addr: Set EMAC Type1 mac address + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * + * Called internally to set Type1 mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) +{ + u32 val; + emac_write(EMAC_MACINDEX, ch); + val = ((mac_addr[5] << 8) | mac_addr[4]); + emac_write(EMAC_MACADDRLO, val); + val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0])); + emac_write(EMAC_MACADDRHI, val); + emac_set_type0addr(priv, ch, mac_addr); +} + +/** + * emac_set_type2addr: Set EMAC Type2 mac address + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * @index: index into RX address entries + * @match: match parameter for RX address matching logic + * + * Called internally to set Type2 mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_set_type2addr(struct emac_priv *priv, u32 ch, + char *mac_addr, int index, int match) +{ + u32 val; + emac_write(EMAC_MACINDEX, index); + val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0])); + emac_write(EMAC_MACADDRHI, val); + val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \ + (match << 19) | BIT(20)); + emac_write(EMAC_MACADDRLO, val); + emac_set_type0addr(priv, ch, mac_addr); +} + +/** + * emac_setmac: Set mac address in the adapter (internal function) + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * + * Called internally to set the mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) +{ + struct device *emac_dev = &priv->ndev->dev; + + if (priv->rx_addr_type == 0) { + emac_set_type0addr(priv, ch, mac_addr); + } else if (priv->rx_addr_type == 1) { + u32 cnt; + for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++) + emac_set_type1addr(priv, ch, mac_addr); + } else if (priv->rx_addr_type == 2) { + emac_set_type2addr(priv, ch, mac_addr, ch, 1); + emac_set_type0addr(priv, ch, mac_addr); + } else { + if (netif_msg_drv(priv)) + dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n"); + } +} + +/** + * emac_dev_setmac_addr: Set mac address in the adapter + * @ndev: The DaVinci EMAC network adapter + * @addr: MAC address to set in device + * + * Called by the system to set the mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) +{ + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &priv->ndev->dev; + struct sockaddr *sa = addr; + + if (!is_valid_ether_addr(sa->sa_data)) + return -EINVAL; + + /* Store mac addr in priv and rx channel and set it in EMAC hw */ + memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); + memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); + + /* MAC address is configured only after the interface is enabled. */ + if (netif_running(ndev)) { + memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); + emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); + } + + if (netif_msg_drv(priv)) + dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n", + priv->mac_addr); + + return 0; +} + +/** + * emac_hw_enable: Enable EMAC hardware for packet transmission/reception + * @priv: The DaVinci EMAC private adapter structure + * + * Enables EMAC hardware for packet processing - enables PHY, enables RX + * for packet reception and enables device interrupts and then NAPI + * + * Returns success (0) or appropriate error code (none right now) + */ +static int emac_hw_enable(struct emac_priv *priv) +{ + u32 val, mbp_enable, mac_control; + + /* Soft reset */ + emac_write(EMAC_SOFTRESET, 1); + while (emac_read(EMAC_SOFTRESET)) + cpu_relax(); + + /* Disable interrupt & Set pacing for more interrupts initially */ + emac_int_disable(priv); + + /* Full duplex enable bit set when auto negotiation happens */ + mac_control = + (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) | + ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) | + ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) | + ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0)); + emac_write(EMAC_MACCONTROL, mac_control); + + mbp_enable = + (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) | + ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) | + ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) | + ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) | + ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) | + ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) | + ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) | + ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \ + EMAC_RXMBP_PROMCH_SHIFT) | + ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) | + ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \ + EMAC_RXMBP_BROADCH_SHIFT) | + ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) | + ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \ + EMAC_RXMBP_MULTICH_SHIFT)); + emac_write(EMAC_RXMBPENABLE, mbp_enable); + emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE & + EMAC_RX_MAX_LEN_MASK)); + emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET & + EMAC_RX_BUFFER_OFFSET_MASK)); + emac_write(EMAC_RXFILTERLOWTHRESH, 0); + emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); + priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; + + emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); + + emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr); + + /* Enable MII */ + val = emac_read(EMAC_MACCONTROL); + val |= (EMAC_MACCONTROL_GMIIEN); + emac_write(EMAC_MACCONTROL, val); + + /* Enable NAPI and interrupts */ + napi_enable(&priv->napi); + emac_int_enable(priv); + return 0; + +} + +/** + * emac_poll: EMAC NAPI Poll function + * @ndev: The DaVinci EMAC network adapter + * @budget: Number of receive packets to process (as told by NAPI layer) + * + * NAPI Poll function implemented to process packets as per budget. We check + * the type of interrupt on the device and accordingly call the TX or RX + * packet processing functions. We follow the budget for RX processing and + * also put a cap on number of TX pkts processed through config param. The + * NAPI schedule function is called if more packets pending. + * + * Returns number of packets received (in most cases; else TX pkts - rarely) + */ +static int emac_poll(struct napi_struct *napi, int budget) +{ + unsigned int mask; + struct emac_priv *priv = container_of(napi, struct emac_priv, napi); + struct net_device *ndev = priv->ndev; + struct device *emac_dev = &ndev->dev; + u32 status = 0; + u32 num_tx_pkts = 0, num_rx_pkts = 0; + + /* Check interrupt vectors and call packet processing */ + status = emac_read(EMAC_MACINVECTOR); + + mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC; + + if (priv->version == EMAC_VERSION_2) + mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; + + if (status & mask) { + num_tx_pkts = cpdma_chan_process(priv->txchan, + EMAC_DEF_TX_MAX_SERVICE); + } /* TX processing */ + + mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; + + if (priv->version == EMAC_VERSION_2) + mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; + + if (status & mask) { + num_rx_pkts = cpdma_chan_process(priv->rxchan, budget); + } /* RX processing */ + + mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT; + if (priv->version == EMAC_VERSION_2) + mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT; + + if (unlikely(status & mask)) { + u32 ch, cause; + dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n"); + netif_stop_queue(ndev); + napi_disable(&priv->napi); + + status = emac_read(EMAC_MACSTATUS); + cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >> + EMAC_MACSTATUS_TXERRCODE_SHIFT); + if (cause) { + ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >> + EMAC_MACSTATUS_TXERRCH_SHIFT); + if (net_ratelimit()) { + dev_err(emac_dev, "TX Host error %s on ch=%d\n", + &emac_txhost_errcodes[cause][0], ch); + } + } + cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >> + EMAC_MACSTATUS_RXERRCODE_SHIFT); + if (cause) { + ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >> + EMAC_MACSTATUS_RXERRCH_SHIFT); + if (netif_msg_hw(priv) && net_ratelimit()) + dev_err(emac_dev, "RX Host error %s on ch=%d\n", + &emac_rxhost_errcodes[cause][0], ch); + } + } else if (num_rx_pkts < budget) { + napi_complete(napi); + emac_int_enable(priv); + } + + return num_rx_pkts; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * emac_poll_controller: EMAC Poll controller function + * @ndev: The DaVinci EMAC network adapter + * + * Polled functionality used by netconsole and others in non interrupt mode + * + */ +void emac_poll_controller(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + + emac_int_disable(priv); + emac_irq(ndev->irq, ndev); + emac_int_enable(priv); +} +#endif + +static void emac_adjust_link(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + struct phy_device *phydev = priv->phydev; + unsigned long flags; + int new_state = 0; + + spin_lock_irqsave(&priv->lock, flags); + + if (phydev->link) { + /* check the mode of operation - full/half duplex */ + if (phydev->duplex != priv->duplex) { + new_state = 1; + priv->duplex = phydev->duplex; + } + if (phydev->speed != priv->speed) { + new_state = 1; + priv->speed = phydev->speed; + } + if (!priv->link) { + new_state = 1; + priv->link = 1; + } + + } else if (priv->link) { + new_state = 1; + priv->link = 0; + priv->speed = 0; + priv->duplex = ~0; + } + if (new_state) { + emac_update_phystatus(priv); + phy_print_status(priv->phydev); + } + + spin_unlock_irqrestore(&priv->lock, flags); +} + +/************************************************************************* + * Linux Driver Model + *************************************************************************/ + +/** + * emac_devioctl: EMAC adapter ioctl + * @ndev: The DaVinci EMAC network adapter + * @ifrq: request parameter + * @cmd: command parameter + * + * EMAC driver ioctl function + * + * Returns success(0) or appropriate error code + */ +static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) +{ + struct emac_priv *priv = netdev_priv(ndev); + + if (!(netif_running(ndev))) + return -EINVAL; + + /* TODO: Add phy read and write and private statistics get feature */ + + return phy_mii_ioctl(priv->phydev, ifrq, cmd); +} + +static int match_first_device(struct device *dev, void *data) +{ + return 1; +} + +/** + * emac_dev_open: EMAC device open + * @ndev: The DaVinci EMAC network adapter + * + * Called when system wants to start the interface. We init TX/RX channels + * and enable the hardware for packet reception/transmission and start the + * network queue. + * + * Returns 0 for a successful open, or appropriate error code + */ +static int emac_dev_open(struct net_device *ndev) +{ + struct device *emac_dev = &ndev->dev; + u32 cnt; + struct resource *res; + int q, m, ret; + int i = 0; + int k = 0; + struct emac_priv *priv = netdev_priv(ndev); + + netif_carrier_off(ndev); + for (cnt = 0; cnt < ETH_ALEN; cnt++) + ndev->dev_addr[cnt] = priv->mac_addr[cnt]; + + /* Configuration items */ + priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; + + priv->mac_hash1 = 0; + priv->mac_hash2 = 0; + emac_write(EMAC_MACHASH1, 0); + emac_write(EMAC_MACHASH2, 0); + + for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) { + struct sk_buff *skb = emac_rx_alloc(priv); + + if (!skb) + break; + + ret = cpdma_chan_submit(priv->rxchan, skb, skb->data, + skb_tailroom(skb), GFP_KERNEL); + if (WARN_ON(ret < 0)) + break; + } + + /* Request IRQ */ + + while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, emac_irq, IRQF_DISABLED, + ndev->name, ndev)) + goto rollback; + } + k++; + } + + /* Start/Enable EMAC hardware */ + emac_hw_enable(priv); + + /* Enable Interrupt pacing if configured */ + if (priv->coal_intvl != 0) { + struct ethtool_coalesce coal; + + coal.rx_coalesce_usecs = (priv->coal_intvl << 4); + emac_set_coalesce(ndev, &coal); + } + + cpdma_ctlr_start(priv->dma); + + priv->phydev = NULL; + /* use the first phy on the bus if pdata did not give us a phy id */ + if (!priv->phy_id) { + struct device *phy; + + phy = bus_find_device(&mdio_bus_type, NULL, NULL, + match_first_device); + if (phy) + priv->phy_id = dev_name(phy); + } + + if (priv->phy_id && *priv->phy_id) { + priv->phydev = phy_connect(ndev, priv->phy_id, + &emac_adjust_link, 0, + PHY_INTERFACE_MODE_MII); + + if (IS_ERR(priv->phydev)) { + dev_err(emac_dev, "could not connect to phy %s\n", + priv->phy_id); + priv->phydev = NULL; + return PTR_ERR(priv->phydev); + } + + priv->link = 0; + priv->speed = 0; + priv->duplex = ~0; + + dev_info(emac_dev, "attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, id=%x)\n", + priv->phydev->drv->name, dev_name(&priv->phydev->dev), + priv->phydev->phy_id); + } else { + /* No PHY , fix the link, speed and duplex settings */ + dev_notice(emac_dev, "no phy, defaulting to 100/full\n"); + priv->link = 1; + priv->speed = SPEED_100; + priv->duplex = DUPLEX_FULL; + emac_update_phystatus(priv); + } + + if (!netif_running(ndev)) /* debug only - to avoid compiler warning */ + emac_dump_regs(priv); + + if (netif_msg_drv(priv)) + dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); + + if (priv->phydev) + phy_start(priv->phydev); + + return 0; + +rollback: + + dev_err(emac_dev, "DaVinci EMAC: request_irq() failed"); + + for (q = k; k >= 0; k--) { + for (m = i; m >= res->start; m--) + free_irq(m, ndev); + res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1); + m = res->end; + } + return -EBUSY; +} + +/** + * emac_dev_stop: EMAC device stop + * @ndev: The DaVinci EMAC network adapter + * + * Called when system wants to stop or down the interface. We stop the network + * queue, disable interrupts and cleanup TX/RX channels. + * + * We return the statistics in net_device_stats structure pulled from emac + */ +static int emac_dev_stop(struct net_device *ndev) +{ + struct resource *res; + int i = 0; + int irq_num; + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &ndev->dev; + + /* inform the upper layers. */ + netif_stop_queue(ndev); + napi_disable(&priv->napi); + + netif_carrier_off(ndev); + emac_int_disable(priv); + cpdma_ctlr_stop(priv->dma); + emac_write(EMAC_SOFTRESET, 1); + + if (priv->phydev) + phy_disconnect(priv->phydev); + + /* Free IRQ */ + while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, priv->ndev); + i++; + } + + if (netif_msg_drv(priv)) + dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); + + return 0; +} + +/** + * emac_dev_getnetstats: EMAC get statistics function + * @ndev: The DaVinci EMAC network adapter + * + * Called when system wants to get statistics from the device. + * + * We return the statistics in net_device_stats structure pulled from emac + */ +static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + u32 mac_control; + u32 stats_clear_mask; + + /* update emac hardware stats and reset the registers*/ + + mac_control = emac_read(EMAC_MACCONTROL); + + if (mac_control & EMAC_MACCONTROL_GMIIEN) + stats_clear_mask = EMAC_STATS_CLR_MASK; + else + stats_clear_mask = 0; + + ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES); + emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask); + + ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) + + emac_read(EMAC_TXSINGLECOLL) + + emac_read(EMAC_TXMULTICOLL)); + emac_write(EMAC_TXCOLLISION, stats_clear_mask); + emac_write(EMAC_TXSINGLECOLL, stats_clear_mask); + emac_write(EMAC_TXMULTICOLL, stats_clear_mask); + + ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + + emac_read(EMAC_RXJABBER) + + emac_read(EMAC_RXUNDERSIZED)); + emac_write(EMAC_RXOVERSIZED, stats_clear_mask); + emac_write(EMAC_RXJABBER, stats_clear_mask); + emac_write(EMAC_RXUNDERSIZED, stats_clear_mask); + + ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + + emac_read(EMAC_RXMOFOVERRUNS)); + emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask); + emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask); + + ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); + emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask); + + ndev->stats.tx_carrier_errors += + emac_read(EMAC_TXCARRIERSENSE); + emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask); + + ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN); + emac_write(EMAC_TXUNDERRUN, stats_clear_mask); + + return &ndev->stats; +} + +static const struct net_device_ops emac_netdev_ops = { + .ndo_open = emac_dev_open, + .ndo_stop = emac_dev_stop, + .ndo_start_xmit = emac_dev_xmit, + .ndo_set_multicast_list = emac_dev_mcast_set, + .ndo_set_mac_address = emac_dev_setmac_addr, + .ndo_do_ioctl = emac_devioctl, + .ndo_tx_timeout = emac_dev_tx_timeout, + .ndo_get_stats = emac_dev_getnetstats, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = emac_poll_controller, +#endif +}; + +/** + * davinci_emac_probe: EMAC device probe + * @pdev: The DaVinci EMAC device that we are removing + * + * Called when probing for emac devicesr. We get details of instances and + * resource information from platform init and register a network device + * and allocate resources necessary for driver to perform + */ +static int __devinit davinci_emac_probe(struct platform_device *pdev) +{ + int rc = 0; + struct resource *res; + struct net_device *ndev; + struct emac_priv *priv; + unsigned long size, hw_ram_addr; + struct emac_platform_data *pdata; + struct device *emac_dev; + struct cpdma_params dma_params; + + /* obtain emac clock from kernel */ + emac_clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(emac_clk)) { + dev_err(&pdev->dev, "failed to get EMAC clock\n"); + return -EBUSY; + } + emac_bus_frequency = clk_get_rate(emac_clk); + /* TODO: Probe PHY here if possible */ + + ndev = alloc_etherdev(sizeof(struct emac_priv)); + if (!ndev) { + dev_err(&pdev->dev, "error allocating net_device\n"); + rc = -ENOMEM; + goto free_clk; + } + + platform_set_drvdata(pdev, ndev); + priv = netdev_priv(ndev); + priv->pdev = pdev; + priv->ndev = ndev; + priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); + + spin_lock_init(&priv->lock); + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + rc = -ENODEV; + goto probe_quit; + } + + /* MAC addr and PHY mask , RMII enable info from platform_data */ + memcpy(priv->mac_addr, pdata->mac_addr, 6); + priv->phy_id = pdata->phy_id; + priv->rmii_en = pdata->rmii_en; + priv->version = pdata->version; + priv->int_enable = pdata->interrupt_enable; + priv->int_disable = pdata->interrupt_disable; + + priv->coal_intvl = 0; + priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000); + + emac_dev = &ndev->dev; + /* Get EMAC platform data */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev,"error getting res\n"); + rc = -ENOENT; + goto probe_quit; + } + + priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; + size = resource_size(res); + if (!request_mem_region(res->start, size, ndev->name)) { + dev_err(&pdev->dev, "failed request_mem_region() for regs\n"); + rc = -ENXIO; + goto probe_quit; + } + + priv->remap_addr = ioremap(res->start, size); + if (!priv->remap_addr) { + dev_err(&pdev->dev, "unable to map IO\n"); + rc = -ENOMEM; + release_mem_region(res->start, size); + goto probe_quit; + } + priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset; + ndev->base_addr = (unsigned long)priv->remap_addr; + + priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; + + hw_ram_addr = pdata->hw_ram_addr; + if (!hw_ram_addr) + hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset; + + memset(&dma_params, 0, sizeof(dma_params)); + dma_params.dev = emac_dev; + dma_params.dmaregs = priv->emac_base; + dma_params.rxthresh = priv->emac_base + 0x120; + dma_params.rxfree = priv->emac_base + 0x140; + dma_params.txhdp = priv->emac_base + 0x600; + dma_params.rxhdp = priv->emac_base + 0x620; + dma_params.txcp = priv->emac_base + 0x640; + dma_params.rxcp = priv->emac_base + 0x660; + dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS; + dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE; + dma_params.desc_hw_addr = hw_ram_addr; + dma_params.desc_mem_size = pdata->ctrl_ram_size; + dma_params.desc_align = 16; + + dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 : + (u32 __force)res->start + pdata->ctrl_ram_offset; + + priv->dma = cpdma_ctlr_create(&dma_params); + if (!priv->dma) { + dev_err(&pdev->dev, "error initializing DMA\n"); + rc = -ENOMEM; + goto no_dma; + } + + priv->txchan = cpdma_chan_create(priv->dma, tx_chan_num(EMAC_DEF_TX_CH), + emac_tx_handler); + priv->rxchan = cpdma_chan_create(priv->dma, rx_chan_num(EMAC_DEF_RX_CH), + emac_rx_handler); + if (WARN_ON(!priv->txchan || !priv->rxchan)) { + rc = -ENOMEM; + goto no_irq_res; + } + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, "error getting irq res\n"); + rc = -ENOENT; + goto no_irq_res; + } + ndev->irq = res->start; + + if (!is_valid_ether_addr(priv->mac_addr)) { + /* Use random MAC if none passed */ + random_ether_addr(priv->mac_addr); + dev_warn(&pdev->dev, "using random MAC addr: %pM\n", + priv->mac_addr); + } + + ndev->netdev_ops = &emac_netdev_ops; + SET_ETHTOOL_OPS(ndev, ðtool_ops); + netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); + + clk_enable(emac_clk); + + /* register the network device */ + SET_NETDEV_DEV(ndev, &pdev->dev); + rc = register_netdev(ndev); + if (rc) { + dev_err(&pdev->dev, "error in register_netdev\n"); + rc = -ENODEV; + goto netdev_reg_err; + } + + + if (netif_msg_probe(priv)) { + dev_notice(emac_dev, "DaVinci EMAC Probe found device "\ + "(regs: %p, irq: %d)\n", + (void *)priv->emac_base_phys, ndev->irq); + } + return 0; + +netdev_reg_err: + clk_disable(emac_clk); +no_irq_res: + if (priv->txchan) + cpdma_chan_destroy(priv->txchan); + if (priv->rxchan) + cpdma_chan_destroy(priv->rxchan); + cpdma_ctlr_destroy(priv->dma); +no_dma: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + iounmap(priv->remap_addr); + +probe_quit: + free_netdev(ndev); +free_clk: + clk_put(emac_clk); + return rc; +} + +/** + * davinci_emac_remove: EMAC device remove + * @pdev: The DaVinci EMAC device that we are removing + * + * Called when removing the device driver. We disable clock usage and release + * the resources taken up by the driver and unregister network device + */ +static int __devexit davinci_emac_remove(struct platform_device *pdev) +{ + struct resource *res; + struct net_device *ndev = platform_get_drvdata(pdev); + struct emac_priv *priv = netdev_priv(ndev); + + dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); + + platform_set_drvdata(pdev, NULL); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (priv->txchan) + cpdma_chan_destroy(priv->txchan); + if (priv->rxchan) + cpdma_chan_destroy(priv->rxchan); + cpdma_ctlr_destroy(priv->dma); + + release_mem_region(res->start, resource_size(res)); + + unregister_netdev(ndev); + iounmap(priv->remap_addr); + free_netdev(ndev); + + clk_disable(emac_clk); + clk_put(emac_clk); + + return 0; +} + +static int davinci_emac_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = platform_get_drvdata(pdev); + + if (netif_running(ndev)) + emac_dev_stop(ndev); + + clk_disable(emac_clk); + + return 0; +} + +static int davinci_emac_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = platform_get_drvdata(pdev); + + clk_enable(emac_clk); + + if (netif_running(ndev)) + emac_dev_open(ndev); + + return 0; +} + +static const struct dev_pm_ops davinci_emac_pm_ops = { + .suspend = davinci_emac_suspend, + .resume = davinci_emac_resume, +}; + +/** + * davinci_emac_driver: EMAC platform driver structure + */ +static struct platform_driver davinci_emac_driver = { + .driver = { + .name = "davinci_emac", + .owner = THIS_MODULE, + .pm = &davinci_emac_pm_ops, + }, + .probe = davinci_emac_probe, + .remove = __devexit_p(davinci_emac_remove), +}; + +/** + * davinci_emac_init: EMAC driver module init + * + * Called when initializing the driver. We register the driver with + * the platform. + */ +static int __init davinci_emac_init(void) +{ + return platform_driver_register(&davinci_emac_driver); +} +late_initcall(davinci_emac_init); + +/** + * davinci_emac_exit: EMAC driver module exit + * + * Called when exiting the driver completely. We unregister the driver with + * the platform and exit + */ +static void __exit davinci_emac_exit(void) +{ + platform_driver_unregister(&davinci_emac_driver); +} +module_exit(davinci_emac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>"); +MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>"); +MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver"); |
