summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/smsc/smsc911x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/smsc/smsc911x.c')
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.c17
1 files changed, 15 insertions, 2 deletions
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 62d1baf111ea..c53c0f4e2ce3 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2110,7 +2110,7 @@ static void __devinit smsc911x_read_mac_address(struct net_device *dev)
static int __devinit smsc911x_init(struct net_device *dev)
{
struct smsc911x_data *pdata = netdev_priv(dev);
- unsigned int byte_test;
+ unsigned int byte_test, mask;
unsigned int to = 100;
SMSC_TRACE(pdata, probe, "Driver Parameters:");
@@ -2130,9 +2130,22 @@ static int __devinit smsc911x_init(struct net_device *dev)
/*
* poll the READY bit in PMT_CTRL. Any other access to the device is
* forbidden while this bit isn't set. Try for 100ms
+ *
+ * Note that this test is done before the WORD_SWAP register is
+ * programmed. So in some configurations the READY bit is at 16 before
+ * WORD_SWAP is written to. This issue is worked around by waiting
+ * until either bit 0 or bit 16 gets set in PMT_CTRL.
+ *
+ * SMSC has confirmed that checking bit 16 (marked as reserved in
+ * the datasheet) is fine since these bits "will either never be set
+ * or can only go high after READY does (so also indicate the device
+ * is ready)".
*/
- while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to)
+
+ mask = PMT_CTRL_READY_ | swahw32(PMT_CTRL_READY_);
+ while (!(smsc911x_reg_read(pdata, PMT_CTRL) & mask) && --to)
udelay(1000);
+
if (to == 0) {
pr_err("Device not READY in 100ms aborting\n");
return -ENODEV;
OpenPOWER on IntegriCloud