diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlx4/main.c')
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlx4/main.c | 147 |
1 files changed, 118 insertions, 29 deletions
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index ee6f4fe00837..e8f8ebb4ae65 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -41,6 +41,7 @@ #include <linux/slab.h> #include <linux/io-mapping.h> #include <linux/delay.h> +#include <linux/netdevice.h> #include <linux/mlx4/device.h> #include <linux/mlx4/doorbell.h> @@ -90,7 +91,9 @@ module_param_named(log_num_mgm_entry_size, MODULE_PARM_DESC(log_num_mgm_entry_size, "log mgm size, that defines the num" " of qp per mcg, for example:" " 10 gives 248.range: 9<=" - " log_num_mgm_entry_size <= 12"); + " log_num_mgm_entry_size <= 12." + " Not in use with device managed" + " flow steering"); #define MLX4_VF (1 << 0) @@ -215,6 +218,10 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) for (i = 1; i <= dev->caps.num_ports; ++i) { dev->caps.vl_cap[i] = dev_cap->max_vl[i]; dev->caps.ib_mtu_cap[i] = dev_cap->ib_mtu[i]; + dev->phys_caps.gid_phys_table_len[i] = dev_cap->max_gids[i]; + dev->phys_caps.pkey_phys_table_len[i] = dev_cap->max_pkeys[i]; + /* set gid and pkey table operating lengths by default + * to non-sriov values */ dev->caps.gid_table_len[i] = dev_cap->max_gids[i]; dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i]; dev->caps.port_width_cap[i] = dev_cap->max_port_width[i]; @@ -243,7 +250,6 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.reserved_srqs = dev_cap->reserved_srqs; dev->caps.max_sq_desc_sz = dev_cap->max_sq_desc_sz; dev->caps.max_rq_desc_sz = dev_cap->max_rq_desc_sz; - dev->caps.num_qp_per_mgm = mlx4_get_qp_per_mgm(dev); /* * Subtract 1 from the limit because we need to allocate a * spare CQE so the HCA HW can tell the difference between an @@ -274,6 +280,28 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.max_gso_sz = dev_cap->max_gso_sz; dev->caps.max_rss_tbl_sz = dev_cap->max_rss_tbl_sz; + if (dev_cap->flags2 & MLX4_DEV_CAP_FLAG2_FS_EN) { + dev->caps.steering_mode = MLX4_STEERING_MODE_DEVICE_MANAGED; + dev->caps.num_qp_per_mgm = dev_cap->fs_max_num_qp_per_entry; + dev->caps.fs_log_max_ucast_qp_range_size = + dev_cap->fs_log_max_ucast_qp_range_size; + } else { + if (dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER && + dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER) { + dev->caps.steering_mode = MLX4_STEERING_MODE_B0; + } else { + dev->caps.steering_mode = MLX4_STEERING_MODE_A0; + + if (dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_UC_STEER || + dev->caps.flags & MLX4_DEV_CAP_FLAG_VEP_MC_STEER) + mlx4_warn(dev, "Must have UC_STEER and MC_STEER flags " + "set to use B0 steering. Falling back to A0 steering mode.\n"); + } + dev->caps.num_qp_per_mgm = mlx4_get_qp_per_mgm(dev); + } + mlx4_dbg(dev, "Steering mode is: %s\n", + mlx4_steering_mode_str(dev->caps.steering_mode)); + /* Sense port always allowed on supported devices for ConnectX1 and 2 */ if (dev->pdev->device != 0x1003) dev->caps.flags |= MLX4_DEV_CAP_FLAG_SENSE_SUPPORT; @@ -288,29 +316,19 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) /* if only ETH is supported - assign ETH */ if (dev->caps.supported_type[i] == MLX4_PORT_TYPE_ETH) dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; - /* if only IB is supported, - * assign IB only if SRIOV is off*/ + /* if only IB is supported, assign IB */ else if (dev->caps.supported_type[i] == - MLX4_PORT_TYPE_IB) { - if (dev->flags & MLX4_FLAG_SRIOV) - dev->caps.port_type[i] = - MLX4_PORT_TYPE_NONE; - else - dev->caps.port_type[i] = - MLX4_PORT_TYPE_IB; - /* if IB and ETH are supported, - * first of all check if SRIOV is on */ - } else if (dev->flags & MLX4_FLAG_SRIOV) - dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; + MLX4_PORT_TYPE_IB) + dev->caps.port_type[i] = MLX4_PORT_TYPE_IB; else { - /* In non-SRIOV mode, we set the port type - * according to user selection of port type, - * if usere selected none, take the FW hint */ - if (port_type_array[i-1] == MLX4_PORT_TYPE_NONE) + /* if IB and ETH are supported, we set the port + * type according to user selection of port type; + * if user selected none, take the FW hint */ + if (port_type_array[i - 1] == MLX4_PORT_TYPE_NONE) dev->caps.port_type[i] = dev->caps.suggested_type[i] ? MLX4_PORT_TYPE_ETH : MLX4_PORT_TYPE_IB; else - dev->caps.port_type[i] = port_type_array[i-1]; + dev->caps.port_type[i] = port_type_array[i - 1]; } } /* @@ -391,6 +409,23 @@ static int mlx4_how_many_lives_vf(struct mlx4_dev *dev) return ret; } +int mlx4_get_parav_qkey(struct mlx4_dev *dev, u32 qpn, u32 *qkey) +{ + u32 qk = MLX4_RESERVED_QKEY_BASE; + if (qpn >= dev->caps.base_tunnel_sqpn + 8 * MLX4_MFUNC_MAX || + qpn < dev->caps.sqp_start) + return -EINVAL; + + if (qpn >= dev->caps.base_tunnel_sqpn) + /* tunnel qp */ + qk += qpn - dev->caps.base_tunnel_sqpn; + else + qk += qpn - dev->caps.sqp_start; + *qkey = qk; + return 0; +} +EXPORT_SYMBOL(mlx4_get_parav_qkey); + int mlx4_is_slave_active(struct mlx4_dev *dev, int slave) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -491,8 +526,13 @@ static int mlx4_slave_cap(struct mlx4_dev *dev) return -ENODEV; } - for (i = 1; i <= dev->caps.num_ports; ++i) + for (i = 1; i <= dev->caps.num_ports; ++i) { dev->caps.port_mask[i] = dev->caps.port_type[i]; + if (mlx4_get_slave_pkey_gid_tbl_len(dev, i, + &dev->caps.gid_table_len[i], + &dev->caps.pkey_table_len[i])) + return -ENODEV; + } if (dev->caps.uar_page_size * (dev->caps.num_uars - dev->caps.reserved_uars) > @@ -529,7 +569,7 @@ int mlx4_change_port_types(struct mlx4_dev *dev, for (port = 1; port <= dev->caps.num_ports; port++) { mlx4_CLOSE_PORT(dev, port); dev->caps.port_type[port] = port_types[port - 1]; - err = mlx4_SET_PORT(dev, port); + err = mlx4_SET_PORT(dev, port, -1); if (err) { mlx4_err(dev, "Failed to set port %d, " "aborting\n", port); @@ -715,7 +755,7 @@ static ssize_t set_port_ib_mtu(struct device *dev, mlx4_unregister_device(mdev); for (port = 1; port <= mdev->caps.num_ports; port++) { mlx4_CLOSE_PORT(mdev, port); - err = mlx4_SET_PORT(mdev, port); + err = mlx4_SET_PORT(mdev, port, -1); if (err) { mlx4_err(mdev, "Failed to set port %d, " "aborting\n", port); @@ -967,9 +1007,11 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, } /* - * It's not strictly required, but for simplicity just map the - * whole multicast group table now. The table isn't very big - * and it's a lot easier than trying to track ref counts. + * For flow steering device managed mode it is required to use + * mlx4_init_icm_table. For B0 steering mode it's not strictly + * required, but for simplicity just map the whole multicast + * group table now. The table isn't very big and it's a lot + * easier than trying to track ref counts. */ err = mlx4_init_icm_table(dev, &priv->mcg_table.table, init_hca->mc_base, @@ -1166,6 +1208,17 @@ err: return -EIO; } +static void mlx4_parav_master_pf_caps(struct mlx4_dev *dev) +{ + int i; + + for (i = 1; i <= dev->caps.num_ports; i++) { + dev->caps.gid_table_len[i] = 1; + dev->caps.pkey_table_len[i] = + dev->phys_caps.pkey_phys_table_len[i] - 1; + } +} + static int mlx4_init_hca(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -1205,7 +1258,29 @@ static int mlx4_init_hca(struct mlx4_dev *dev) goto err_stop_fw; } + if (mlx4_is_master(dev)) + mlx4_parav_master_pf_caps(dev); + + priv->fs_hash_mode = MLX4_FS_L2_HASH; + + switch (priv->fs_hash_mode) { + case MLX4_FS_L2_HASH: + init_hca.fs_hash_enable_bits = 0; + break; + + case MLX4_FS_L2_L3_L4_HASH: + /* Enable flow steering with + * udp unicast and tcp unicast + */ + init_hca.fs_hash_enable_bits = + MLX4_FS_UDP_UC_EN | MLX4_FS_TCP_UC_EN; + break; + } + profile = default_profile; + if (dev->caps.steering_mode == + MLX4_STEERING_MODE_DEVICE_MANAGED) + profile.num_mcg = MLX4_FS_NUM_MCG; icm_size = mlx4_make_profile(dev, &profile, &dev_cap, &init_hca); @@ -1477,12 +1552,24 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) "with caps = 0\n", port, err); dev->caps.ib_port_def_cap[port] = ib_port_default_caps; + /* initialize per-slave default ib port capabilities */ + if (mlx4_is_master(dev)) { + int i; + for (i = 0; i < dev->num_slaves; i++) { + if (i == mlx4_master_func_num(dev)) + continue; + priv->mfunc.master.slave_state[i].ib_cap_mask[port] = + ib_port_default_caps; + } + } + if (mlx4_is_mfunc(dev)) dev->caps.port_ib_mtu[port] = IB_MTU_2048; else dev->caps.port_ib_mtu[port] = IB_MTU_4096; - err = mlx4_SET_PORT(dev, port); + err = mlx4_SET_PORT(dev, port, mlx4_is_master(dev) ? + dev->caps.pkey_table_len[port] : -1); if (err) { mlx4_err(dev, "Failed to set port %d, aborting\n", port); @@ -1539,8 +1626,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); struct msix_entry *entries; int nreq = min_t(int, dev->caps.num_ports * - min_t(int, num_online_cpus() + 1, MAX_MSIX_P_PORT) - + MSIX_LEGACY_SZ, MAX_MSIX); + min_t(int, netif_get_num_default_rss_queues() + 1, + MAX_MSIX_P_PORT) + MSIX_LEGACY_SZ, MAX_MSIX); int err; int i; @@ -1975,6 +2062,8 @@ slave_start: if (err == -EBUSY && (dev->flags & MLX4_FLAG_MSI_X) && !mlx4_is_mfunc(dev)) { dev->flags &= ~MLX4_FLAG_MSI_X; + dev->caps.num_comp_vectors = 1; + dev->caps.comp_pool = 0; pci_disable_msix(pdev); err = mlx4_setup_hca(dev); } |
