summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlx4/en_netdev.c')
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_netdev.c46
1 files changed, 46 insertions, 0 deletions
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index e0de2fd1ce12..4726122ea76b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2184,6 +2184,25 @@ static int mlx4_en_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
}
}
+static netdev_features_t mlx4_en_fix_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct mlx4_en_priv *en_priv = netdev_priv(netdev);
+ struct mlx4_en_dev *mdev = en_priv->mdev;
+
+ /* Since there is no support for separate RX C-TAG/S-TAG vlan accel
+ * enable/disable make sure S-TAG flag is always in same state as
+ * C-TAG.
+ */
+ if (features & NETIF_F_HW_VLAN_CTAG_RX &&
+ !(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_SKIP_OUTER_VLAN))
+ features |= NETIF_F_HW_VLAN_STAG_RX;
+ else
+ features &= ~NETIF_F_HW_VLAN_STAG_RX;
+
+ return features;
+}
+
static int mlx4_en_set_features(struct net_device *netdev,
netdev_features_t features)
{
@@ -2218,6 +2237,10 @@ static int mlx4_en_set_features(struct net_device *netdev,
en_info(priv, "Turn %s TX vlan strip offload\n",
(features & NETIF_F_HW_VLAN_CTAG_TX) ? "ON" : "OFF");
+ if (DEV_FEATURE_CHANGED(netdev, features, NETIF_F_HW_VLAN_STAG_TX))
+ en_info(priv, "Turn %s TX S-VLAN strip offload\n",
+ (features & NETIF_F_HW_VLAN_STAG_TX) ? "ON" : "OFF");
+
if (DEV_FEATURE_CHANGED(netdev, features, NETIF_F_LOOPBACK)) {
en_info(priv, "Turn %s loopback\n",
(features & NETIF_F_LOOPBACK) ? "ON" : "OFF");
@@ -2460,6 +2483,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
.ndo_poll_controller = mlx4_en_netpoll,
#endif
.ndo_set_features = mlx4_en_set_features,
+ .ndo_fix_features = mlx4_en_fix_features,
.ndo_setup_tc = mlx4_en_setup_tc,
#ifdef CONFIG_RFS_ACCEL
.ndo_rx_flow_steer = mlx4_en_filter_rfs,
@@ -2500,6 +2524,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = {
.ndo_poll_controller = mlx4_en_netpoll,
#endif
.ndo_set_features = mlx4_en_set_features,
+ .ndo_fix_features = mlx4_en_fix_features,
.ndo_setup_tc = mlx4_en_setup_tc,
#ifdef CONFIG_RFS_ACCEL
.ndo_rx_flow_steer = mlx4_en_filter_rfs,
@@ -2931,6 +2956,27 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
dev->hw_features |= NETIF_F_LOOPBACK |
NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
+ if (!(mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_SKIP_OUTER_VLAN)) {
+ dev->features |= NETIF_F_HW_VLAN_STAG_RX |
+ NETIF_F_HW_VLAN_STAG_FILTER;
+ dev->hw_features |= NETIF_F_HW_VLAN_STAG_RX;
+ }
+
+ if (mlx4_is_slave(mdev->dev)) {
+ int phv;
+
+ err = get_phv_bit(mdev->dev, port, &phv);
+ if (!err && phv) {
+ dev->hw_features |= NETIF_F_HW_VLAN_STAG_TX;
+ priv->pflags |= MLX4_EN_PRIV_FLAGS_PHV;
+ }
+ } else {
+ if (mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_PHV_EN &&
+ !(mdev->dev->caps.flags2 &
+ MLX4_DEV_CAP_FLAG2_SKIP_OUTER_VLAN))
+ dev->hw_features |= NETIF_F_HW_VLAN_STAG_TX;
+ }
+
if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_FCS_KEEP)
dev->hw_features |= NETIF_F_RXFCS;
OpenPOWER on IntegriCloud