diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 81 |
1 files changed, 20 insertions, 61 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index b4eab18e1c16..142ca39a68f6 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4284,6 +4284,7 @@ static int e1000_open(struct net_device *netdev) netif_start_queue(netdev); adapter->idle_check = true; + hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); /* fire a link status change interrupt to start the watchdog */ @@ -4642,6 +4643,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; + pm_runtime_get_sync(&adapter->pdev->dev); ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); @@ -4652,6 +4654,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); + pm_runtime_put_sync(&adapter->pdev->dev); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults @@ -5865,8 +5868,7 @@ release: return retval; } -static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) +static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5890,10 +5892,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } e1000e_reset_interrupt_capability(adapter); - retval = pci_save_state(pdev); - if (retval) - return retval; - status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -5945,13 +5943,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, ew32(WUFC, 0); } - *enable_wake = !!wufc; - - /* make sure adapter isn't asleep if manageability is enabled */ - if ((adapter->flags & FLAG_MNG_PT_ENABLED) || - (hw->mac.ops.check_mng_mode(hw))) - *enable_wake = true; - if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); @@ -5960,27 +5951,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, */ e1000e_release_hw_control(adapter); - pci_disable_device(pdev); - - return 0; -} - -static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) -{ - if (sleep && wake) { - pci_prepare_to_sleep(pdev); - return; - } - - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); -} - -static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, bool wake) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); - /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To * prevent this we need to mask off the correctable errors on the @@ -5994,12 +5964,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, bool wake) pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); - e1000_power_off(pdev, sleep, wake); + pci_save_state(pdev); + pci_prepare_to_sleep(pdev); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); - } else { - e1000_power_off(pdev, sleep, wake); } + + return 0; } #ifdef CONFIG_PCIEASPM @@ -6057,9 +6028,7 @@ static int __e1000_resume(struct pci_dev *pdev) if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); + pci_set_master(pdev); e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { @@ -6125,14 +6094,8 @@ static int __e1000_resume(struct pci_dev *pdev) static int e1000_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - - retval = __e1000_shutdown(pdev, &wake, false); - if (!retval) - e1000_complete_shutdown(pdev, true, wake); - return retval; + return __e1000_shutdown(pdev, false); } static int e1000_resume(struct device *dev) @@ -6155,13 +6118,10 @@ static int e1000_runtime_suspend(struct device *dev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (e1000e_pm_ready(adapter)) { - bool wake; - - __e1000_shutdown(pdev, &wake, true); - } + if (!e1000e_pm_ready(adapter)) + return 0; - return 0; + return __e1000_shutdown(pdev, true); } static int e1000_idle(struct device *dev) @@ -6199,12 +6159,7 @@ static int e1000_runtime_resume(struct device *dev) static void e1000_shutdown(struct pci_dev *pdev) { - bool wake = false; - - __e1000_shutdown(pdev, &wake, false); - - if (system_state == SYSTEM_POWER_OFF) - e1000_complete_shutdown(pdev, false, wake); + __e1000_shutdown(pdev, false); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -6325,9 +6280,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { - pci_set_master(pdev); pdev->state_saved = true; pci_restore_state(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); @@ -6757,7 +6712,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* make sure adapter isn't asleep if manageability is enabled */ + if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) + device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); |
