diff options
Diffstat (limited to 'drivers/net/ethernet/dec/tulip/interrupt.c')
| -rw-r--r-- | drivers/net/ethernet/dec/tulip/interrupt.c | 811 |
1 files changed, 811 insertions, 0 deletions
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c new file mode 100644 index 000000000000..5350d753e0ff --- /dev/null +++ b/drivers/net/ethernet/dec/tulip/interrupt.c @@ -0,0 +1,811 @@ +/* + drivers/net/tulip/interrupt.c + + Copyright 2000,2001 The Linux Kernel Team + Written/copyright 1994-2001 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} + for more information on this driver. + Please submit bugs to http://bugzilla.kernel.org/ . + +*/ + +#include <linux/pci.h> +#include "tulip.h" +#include <linux/etherdevice.h> + +int tulip_rx_copybreak; +unsigned int tulip_max_interrupt_work; + +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION +#define MIT_SIZE 15 +#define MIT_TABLE 15 /* We use 0 or max */ + +static unsigned int mit_table[MIT_SIZE+1] = +{ + /* CRS11 21143 hardware Mitigation Control Interrupt + We use only RX mitigation we other techniques for + TX intr. mitigation. + + 31 Cycle Size (timer control) + 30:27 TX timer in 16 * Cycle size + 26:24 TX No pkts before Int. + 23:20 RX timer in Cycle size + 19:17 RX No pkts before Int. + 16 Continues Mode (CM) + */ + + 0x0, /* IM disabled */ + 0x80150000, /* RX time = 1, RX pkts = 2, CM = 1 */ + 0x80150000, + 0x80270000, + 0x80370000, + 0x80490000, + 0x80590000, + 0x80690000, + 0x807B0000, + 0x808B0000, + 0x809D0000, + 0x80AD0000, + 0x80BD0000, + 0x80CF0000, + 0x80DF0000, +// 0x80FF0000 /* RX time = 16, RX pkts = 7, CM = 1 */ + 0x80F10000 /* RX time = 16, RX pkts = 0, CM = 1 */ +}; +#endif + + +int tulip_refill_rx(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int entry; + int refilled = 0; + + /* Refill the Rx ring buffers. */ + for (; tp->cur_rx - tp->dirty_rx > 0; tp->dirty_rx++) { + entry = tp->dirty_rx % RX_RING_SIZE; + if (tp->rx_buffers[entry].skb == NULL) { + struct sk_buff *skb; + dma_addr_t mapping; + + skb = tp->rx_buffers[entry].skb = dev_alloc_skb(PKT_BUF_SZ); + if (skb == NULL) + break; + + mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ, + PCI_DMA_FROMDEVICE); + tp->rx_buffers[entry].mapping = mapping; + + skb->dev = dev; /* Mark as being used by this device. */ + tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping); + refilled++; + } + tp->rx_ring[entry].status = cpu_to_le32(DescOwned); + } + if(tp->chip_id == LC82C168) { + if(((ioread32(tp->base_addr + CSR5)>>17)&0x07) == 4) { + /* Rx stopped due to out of buffers, + * restart it + */ + iowrite32(0x01, tp->base_addr + CSR2); + } + } + return refilled; +} + +#ifdef CONFIG_TULIP_NAPI + +void oom_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = netdev_priv(dev); + napi_schedule(&tp->napi); +} + +int tulip_poll(struct napi_struct *napi, int budget) +{ + struct tulip_private *tp = container_of(napi, struct tulip_private, napi); + struct net_device *dev = tp->dev; + int entry = tp->cur_rx % RX_RING_SIZE; + int work_done = 0; +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + int received = 0; +#endif + +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + +/* that one buffer is needed for mit activation; or might be a + bug in the ring buffer code; check later -- JHS*/ + + if (budget >=RX_RING_SIZE) budget--; +#endif + + if (tulip_debug > 4) + netdev_dbg(dev, " In tulip_rx(), entry %d %08x\n", + entry, tp->rx_ring[entry].status); + + do { + if (ioread32(tp->base_addr + CSR5) == 0xffffffff) { + netdev_dbg(dev, " In tulip_poll(), hardware disappeared\n"); + break; + } + /* Acknowledge current RX interrupt sources. */ + iowrite32((RxIntr | RxNoBuf), tp->base_addr + CSR5); + + + /* If we own the next entry, it is a new packet. Send it up. */ + while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { + s32 status = le32_to_cpu(tp->rx_ring[entry].status); + short pkt_len; + + if (tp->dirty_rx + RX_RING_SIZE == tp->cur_rx) + break; + + if (tulip_debug > 5) + netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n", + entry, status); + + if (++work_done >= budget) + goto not_done; + + /* + * Omit the four octet CRC from the length. + * (May not be considered valid until we have + * checked status for RxLengthOver2047 bits) + */ + pkt_len = ((status >> 16) & 0x7ff) - 4; + + /* + * Maximum pkt_len is 1518 (1514 + vlan header) + * Anything higher than this is always invalid + * regardless of RxLengthOver2047 bits + */ + + if ((status & (RxLengthOver2047 | + RxDescCRCError | + RxDescCollisionSeen | + RxDescRunt | + RxDescDescErr | + RxWholePkt)) != RxWholePkt || + pkt_len > 1518) { + if ((status & (RxLengthOver2047 | + RxWholePkt)) != RxWholePkt) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + if (tulip_debug > 1) + dev_warn(&dev->dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); + dev->stats.rx_length_errors++; + } + } else { + /* There was a fatal error. */ + if (tulip_debug > 2) + netdev_dbg(dev, "Receive error, Rx status %08x\n", + status); + dev->stats.rx_errors++; /* end of a packet.*/ + if (pkt_len > 1518 || + (status & RxDescRunt)) + dev->stats.rx_length_errors++; + + if (status & 0x0004) + dev->stats.rx_frame_errors++; + if (status & 0x0002) + dev->stats.rx_crc_errors++; + if (status & 0x0001) + dev->stats.rx_fifo_errors++; + } + } else { + struct sk_buff *skb; + + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < tulip_rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single_for_cpu(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); +#if ! defined(__alpha__) + skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data, + pkt_len); + skb_put(skb, pkt_len); +#else + memcpy(skb_put(skb, pkt_len), + tp->rx_buffers[entry].skb->data, + pkt_len); +#endif + pci_dma_sync_single_for_device(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); + } else { /* Pass up the skb already on the Rx ring. */ + char *temp = skb_put(skb = tp->rx_buffers[entry].skb, + pkt_len); + +#ifndef final_version + if (tp->rx_buffers[entry].mapping != + le32_to_cpu(tp->rx_ring[entry].buffer1)) { + dev_err(&dev->dev, + "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %08llx %p / %p\n", + le32_to_cpu(tp->rx_ring[entry].buffer1), + (unsigned long long)tp->rx_buffers[entry].mapping, + skb->head, temp); + } +#endif + + pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + + tp->rx_buffers[entry].skb = NULL; + tp->rx_buffers[entry].mapping = 0; + } + skb->protocol = eth_type_trans(skb, dev); + + netif_receive_skb(skb); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } +#ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + received++; +#endif + + entry = (++tp->cur_rx) % RX_RING_SIZE; + if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/4) + tulip_refill_rx(dev); + + } + + /* New ack strategy... irq does not ack Rx any longer + hopefully this helps */ + + /* Really bad things can happen here... If new packet arrives + * and an irq arrives (tx or just due to occasionally unset + * mask), it will be acked by irq handler, but new thread + * is not scheduled. It is major hole in design. + * No idea how to fix this if "playing with fire" will fail + * tomorrow (night 011029). If it will not fail, we won + * finally: amount of IO did not increase at all. */ + } while ((ioread32(tp->base_addr + CSR5) & RxIntr)); + + #ifdef CONFIG_TULIP_NAPI_HW_MITIGATION + + /* We use this simplistic scheme for IM. It's proven by + real life installations. We can have IM enabled + continuesly but this would cause unnecessary latency. + Unfortunely we can't use all the NET_RX_* feedback here. + This would turn on IM for devices that is not contributing + to backlog congestion with unnecessary latency. + + We monitor the device RX-ring and have: + + HW Interrupt Mitigation either ON or OFF. + + ON: More then 1 pkt received (per intr.) OR we are dropping + OFF: Only 1 pkt received + + Note. We only use min and max (0, 15) settings from mit_table */ + + + if( tp->flags & HAS_INTR_MITIGATION) { + if( received > 1 ) { + if( ! tp->mit_on ) { + tp->mit_on = 1; + iowrite32(mit_table[MIT_TABLE], tp->base_addr + CSR11); + } + } + else { + if( tp->mit_on ) { + tp->mit_on = 0; + iowrite32(0, tp->base_addr + CSR11); + } + } + } + +#endif /* CONFIG_TULIP_NAPI_HW_MITIGATION */ + + tulip_refill_rx(dev); + + /* If RX ring is not full we are out of memory. */ + if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) + goto oom; + + /* Remove us from polling list and enable RX intr. */ + + napi_complete(napi); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, tp->base_addr+CSR7); + + /* The last op happens after poll completion. Which means the following: + * 1. it can race with disabling irqs in irq handler + * 2. it can race with dise/enabling irqs in other poll threads + * 3. if an irq raised after beginning loop, it will be immediately + * triggered here. + * + * Summarizing: the logic results in some redundant irqs both + * due to races in masking and due to too late acking of already + * processed irqs. But it must not result in losing events. + */ + + return work_done; + + not_done: + if (tp->cur_rx - tp->dirty_rx > RX_RING_SIZE/2 || + tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) + tulip_refill_rx(dev); + + if (tp->rx_buffers[tp->dirty_rx % RX_RING_SIZE].skb == NULL) + goto oom; + + return work_done; + + oom: /* Executed with RX ints disabled */ + + /* Start timer, stop polling, but do not enable rx interrupts. */ + mod_timer(&tp->oom_timer, jiffies+1); + + /* Think: timer_pending() was an explicit signature of bug. + * Timer can be pending now but fired and completed + * before we did napi_complete(). See? We would lose it. */ + + /* remove ourselves from the polling list */ + napi_complete(napi); + + return work_done; +} + +#else /* CONFIG_TULIP_NAPI */ + +static int tulip_rx(struct net_device *dev) +{ + struct tulip_private *tp = netdev_priv(dev); + int entry = tp->cur_rx % RX_RING_SIZE; + int rx_work_limit = tp->dirty_rx + RX_RING_SIZE - tp->cur_rx; + int received = 0; + + if (tulip_debug > 4) + netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n", + entry, tp->rx_ring[entry].status); + /* If we own the next entry, it is a new packet. Send it up. */ + while ( ! (tp->rx_ring[entry].status & cpu_to_le32(DescOwned))) { + s32 status = le32_to_cpu(tp->rx_ring[entry].status); + short pkt_len; + + if (tulip_debug > 5) + netdev_dbg(dev, "In tulip_rx(), entry %d %08x\n", + entry, status); + if (--rx_work_limit < 0) + break; + + /* + Omit the four octet CRC from the length. + (May not be considered valid until we have + checked status for RxLengthOver2047 bits) + */ + pkt_len = ((status >> 16) & 0x7ff) - 4; + /* + Maximum pkt_len is 1518 (1514 + vlan header) + Anything higher than this is always invalid + regardless of RxLengthOver2047 bits + */ + + if ((status & (RxLengthOver2047 | + RxDescCRCError | + RxDescCollisionSeen | + RxDescRunt | + RxDescDescErr | + RxWholePkt)) != RxWholePkt || + pkt_len > 1518) { + if ((status & (RxLengthOver2047 | + RxWholePkt)) != RxWholePkt) { + /* Ingore earlier buffers. */ + if ((status & 0xffff) != 0x7fff) { + if (tulip_debug > 1) + netdev_warn(dev, + "Oversized Ethernet frame spanned multiple buffers, status %08x!\n", + status); + dev->stats.rx_length_errors++; + } + } else { + /* There was a fatal error. */ + if (tulip_debug > 2) + netdev_dbg(dev, "Receive error, Rx status %08x\n", + status); + dev->stats.rx_errors++; /* end of a packet.*/ + if (pkt_len > 1518 || + (status & RxDescRunt)) + dev->stats.rx_length_errors++; + if (status & 0x0004) + dev->stats.rx_frame_errors++; + if (status & 0x0002) + dev->stats.rx_crc_errors++; + if (status & 0x0001) + dev->stats.rx_fifo_errors++; + } + } else { + struct sk_buff *skb; + + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < tulip_rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + pci_dma_sync_single_for_cpu(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); +#if ! defined(__alpha__) + skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data, + pkt_len); + skb_put(skb, pkt_len); +#else + memcpy(skb_put(skb, pkt_len), + tp->rx_buffers[entry].skb->data, + pkt_len); +#endif + pci_dma_sync_single_for_device(tp->pdev, + tp->rx_buffers[entry].mapping, + pkt_len, PCI_DMA_FROMDEVICE); + } else { /* Pass up the skb already on the Rx ring. */ + char *temp = skb_put(skb = tp->rx_buffers[entry].skb, + pkt_len); + +#ifndef final_version + if (tp->rx_buffers[entry].mapping != + le32_to_cpu(tp->rx_ring[entry].buffer1)) { + dev_err(&dev->dev, + "Internal fault: The skbuff addresses do not match in tulip_rx: %08x vs. %Lx %p / %p\n", + le32_to_cpu(tp->rx_ring[entry].buffer1), + (long long)tp->rx_buffers[entry].mapping, + skb->head, temp); + } +#endif + + pci_unmap_single(tp->pdev, tp->rx_buffers[entry].mapping, + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + + tp->rx_buffers[entry].skb = NULL; + tp->rx_buffers[entry].mapping = 0; + } + skb->protocol = eth_type_trans(skb, dev); + + netif_rx(skb); + + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + received++; + entry = (++tp->cur_rx) % RX_RING_SIZE; + } + return received; +} +#endif /* CONFIG_TULIP_NAPI */ + +static inline unsigned int phy_interrupt (struct net_device *dev) +{ +#ifdef __hppa__ + struct tulip_private *tp = netdev_priv(dev); + int csr12 = ioread32(tp->base_addr + CSR12) & 0xff; + + if (csr12 != tp->csr12_shadow) { + /* ack interrupt */ + iowrite32(csr12 | 0x02, tp->base_addr + CSR12); + tp->csr12_shadow = csr12; + /* do link change stuff */ + spin_lock(&tp->lock); + tulip_check_duplex(dev); + spin_unlock(&tp->lock); + /* clear irq ack bit */ + iowrite32(csr12 & ~0x02, tp->base_addr + CSR12); + + return 1; + } +#endif + + return 0; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +irqreturn_t tulip_interrupt(int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *)dev_instance; + struct tulip_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->base_addr; + int csr5; + int missed; + int rx = 0; + int tx = 0; + int oi = 0; + int maxrx = RX_RING_SIZE; + int maxtx = TX_RING_SIZE; + int maxoi = TX_RING_SIZE; +#ifdef CONFIG_TULIP_NAPI + int rxd = 0; +#else + int entry; +#endif + unsigned int work_count = tulip_max_interrupt_work; + unsigned int handled = 0; + + /* Let's see whether the interrupt really is for us */ + csr5 = ioread32(ioaddr + CSR5); + + if (tp->flags & HAS_PHY_IRQ) + handled = phy_interrupt (dev); + + if ((csr5 & (NormalIntr|AbnormalIntr)) == 0) + return IRQ_RETVAL(handled); + + tp->nir++; + + do { + +#ifdef CONFIG_TULIP_NAPI + + if (!rxd && (csr5 & (RxIntr | RxNoBuf))) { + rxd++; + /* Mask RX intrs and add the device to poll list. */ + iowrite32(tulip_tbl[tp->chip_id].valid_intrs&~RxPollInt, ioaddr + CSR7); + napi_schedule(&tp->napi); + + if (!(csr5&~(AbnormalIntr|NormalIntr|RxPollInt|TPLnkPass))) + break; + } + + /* Acknowledge the interrupt sources we handle here ASAP + the poll function does Rx and RxNoBuf acking */ + + iowrite32(csr5 & 0x0001ff3f, ioaddr + CSR5); + +#else + /* Acknowledge all of the current interrupt sources ASAP. */ + iowrite32(csr5 & 0x0001ffff, ioaddr + CSR5); + + + if (csr5 & (RxIntr | RxNoBuf)) { + rx += tulip_rx(dev); + tulip_refill_rx(dev); + } + +#endif /* CONFIG_TULIP_NAPI */ + + if (tulip_debug > 4) + netdev_dbg(dev, "interrupt csr5=%#8.8x new csr5=%#8.8x\n", + csr5, ioread32(ioaddr + CSR5)); + + + if (csr5 & (TxNoBuf | TxDied | TxIntr | TimerInt)) { + unsigned int dirty_tx; + + spin_lock(&tp->lock); + + for (dirty_tx = tp->dirty_tx; tp->cur_tx - dirty_tx > 0; + dirty_tx++) { + int entry = dirty_tx % TX_RING_SIZE; + int status = le32_to_cpu(tp->tx_ring[entry].status); + + if (status < 0) + break; /* It still has not been Txed */ + + /* Check for Rx filter setup frames. */ + if (tp->tx_buffers[entry].skb == NULL) { + /* test because dummy frames not mapped */ + if (tp->tx_buffers[entry].mapping) + pci_unmap_single(tp->pdev, + tp->tx_buffers[entry].mapping, + sizeof(tp->setup_frame), + PCI_DMA_TODEVICE); + continue; + } + + if (status & 0x8000) { + /* There was an major error, log it. */ +#ifndef final_version + if (tulip_debug > 1) + netdev_dbg(dev, "Transmit error, Tx status %08x\n", + status); +#endif + dev->stats.tx_errors++; + if (status & 0x4104) + dev->stats.tx_aborted_errors++; + if (status & 0x0C00) + dev->stats.tx_carrier_errors++; + if (status & 0x0200) + dev->stats.tx_window_errors++; + if (status & 0x0002) + dev->stats.tx_fifo_errors++; + if ((status & 0x0080) && tp->full_duplex == 0) + dev->stats.tx_heartbeat_errors++; + } else { + dev->stats.tx_bytes += + tp->tx_buffers[entry].skb->len; + dev->stats.collisions += (status >> 3) & 15; + dev->stats.tx_packets++; + } + + pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping, + tp->tx_buffers[entry].skb->len, + PCI_DMA_TODEVICE); + + /* Free the original skb. */ + dev_kfree_skb_irq(tp->tx_buffers[entry].skb); + tp->tx_buffers[entry].skb = NULL; + tp->tx_buffers[entry].mapping = 0; + tx++; + } + +#ifndef final_version + if (tp->cur_tx - dirty_tx > TX_RING_SIZE) { + dev_err(&dev->dev, + "Out-of-sync dirty pointer, %d vs. %d\n", + dirty_tx, tp->cur_tx); + dirty_tx += TX_RING_SIZE; + } +#endif + + if (tp->cur_tx - dirty_tx < TX_RING_SIZE - 2) + netif_wake_queue(dev); + + tp->dirty_tx = dirty_tx; + if (csr5 & TxDied) { + if (tulip_debug > 2) + dev_warn(&dev->dev, + "The transmitter stopped. CSR5 is %x, CSR6 %x, new CSR6 %x\n", + csr5, ioread32(ioaddr + CSR6), + tp->csr6); + tulip_restart_rxtx(tp); + } + spin_unlock(&tp->lock); + } + + /* Log errors. */ + if (csr5 & AbnormalIntr) { /* Abnormal error summary bit. */ + if (csr5 == 0xffffffff) + break; + if (csr5 & TxJabber) + dev->stats.tx_errors++; + if (csr5 & TxFIFOUnderflow) { + if ((tp->csr6 & 0xC000) != 0xC000) + tp->csr6 += 0x4000; /* Bump up the Tx threshold */ + else + tp->csr6 |= 0x00200000; /* Store-n-forward. */ + /* Restart the transmit process. */ + tulip_restart_rxtx(tp); + iowrite32(0, ioaddr + CSR1); + } + if (csr5 & (RxDied | RxNoBuf)) { + if (tp->flags & COMET_MAC_ADDR) { + iowrite32(tp->mc_filter[0], ioaddr + 0xAC); + iowrite32(tp->mc_filter[1], ioaddr + 0xB0); + } + } + if (csr5 & RxDied) { /* Missed a Rx frame. */ + dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff; + dev->stats.rx_errors++; + tulip_start_rxtx(tp); + } + /* + * NB: t21142_lnk_change() does a del_timer_sync(), so be careful if this + * call is ever done under the spinlock + */ + if (csr5 & (TPLnkPass | TPLnkFail | 0x08000000)) { + if (tp->link_change) + (tp->link_change)(dev, csr5); + } + if (csr5 & SystemError) { + int error = (csr5 >> 23) & 7; + /* oops, we hit a PCI error. The code produced corresponds + * to the reason: + * 0 - parity error + * 1 - master abort + * 2 - target abort + * Note that on parity error, we should do a software reset + * of the chip to get it back into a sane state (according + * to the 21142/3 docs that is). + * -- rmk + */ + dev_err(&dev->dev, + "(%lu) System Error occurred (%d)\n", + tp->nir, error); + } + /* Clear all error sources, included undocumented ones! */ + iowrite32(0x0800f7ba, ioaddr + CSR5); + oi++; + } + if (csr5 & TimerInt) { + + if (tulip_debug > 2) + dev_err(&dev->dev, + "Re-enabling interrupts, %08x\n", + csr5); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7); + tp->ttimer = 0; + oi++; + } + if (tx > maxtx || rx > maxrx || oi > maxoi) { + if (tulip_debug > 1) + dev_warn(&dev->dev, "Too much work during an interrupt, csr5=0x%08x. (%lu) (%d,%d,%d)\n", + csr5, tp->nir, tx, rx, oi); + + /* Acknowledge all interrupt sources. */ + iowrite32(0x8001ffff, ioaddr + CSR5); + if (tp->flags & HAS_INTR_MITIGATION) { + /* Josip Loncaric at ICASE did extensive experimentation + to develop a good interrupt mitigation setting.*/ + iowrite32(0x8b240000, ioaddr + CSR11); + } else if (tp->chip_id == LC82C168) { + /* the LC82C168 doesn't have a hw timer.*/ + iowrite32(0x00, ioaddr + CSR7); + mod_timer(&tp->timer, RUN_AT(HZ/50)); + } else { + /* Mask all interrupting sources, set timer to + re-enable. */ + iowrite32(((~csr5) & 0x0001ebef) | AbnormalIntr | TimerInt, ioaddr + CSR7); + iowrite32(0x0012, ioaddr + CSR11); + } + break; + } + + work_count--; + if (work_count == 0) + break; + + csr5 = ioread32(ioaddr + CSR5); + +#ifdef CONFIG_TULIP_NAPI + if (rxd) + csr5 &= ~RxPollInt; + } while ((csr5 & (TxNoBuf | + TxDied | + TxIntr | + TimerInt | + /* Abnormal intr. */ + RxDied | + TxFIFOUnderflow | + TxJabber | + TPLnkFail | + SystemError )) != 0); +#else + } while ((csr5 & (NormalIntr|AbnormalIntr)) != 0); + + tulip_refill_rx(dev); + + /* check if the card is in suspend mode */ + entry = tp->dirty_rx % RX_RING_SIZE; + if (tp->rx_buffers[entry].skb == NULL) { + if (tulip_debug > 1) + dev_warn(&dev->dev, + "in rx suspend mode: (%lu) (tp->cur_rx = %u, ttimer = %d, rx = %d) go/stay in suspend mode\n", + tp->nir, tp->cur_rx, tp->ttimer, rx); + if (tp->chip_id == LC82C168) { + iowrite32(0x00, ioaddr + CSR7); + mod_timer(&tp->timer, RUN_AT(HZ/50)); + } else { + if (tp->ttimer == 0 || (ioread32(ioaddr + CSR11) & 0xffff) == 0) { + if (tulip_debug > 1) + dev_warn(&dev->dev, + "in rx suspend mode: (%lu) set timer\n", + tp->nir); + iowrite32(tulip_tbl[tp->chip_id].valid_intrs | TimerInt, + ioaddr + CSR7); + iowrite32(TimerInt, ioaddr + CSR5); + iowrite32(12, ioaddr + CSR11); + tp->ttimer = 1; + } + } + } +#endif /* CONFIG_TULIP_NAPI */ + + if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) { + dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed; + } + + if (tulip_debug > 4) + netdev_dbg(dev, "exiting interrupt, csr5=%#04x\n", + ioread32(ioaddr + CSR5)); + + return IRQ_HANDLED; +} |
