summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/tg3.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/broadcom/tg3.h')
-rw-r--r--drivers/net/ethernet/broadcom/tg3.h47
1 files changed, 45 insertions, 2 deletions
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 93865f899a4f..a1b75cd67b9d 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -2311,10 +2311,11 @@
#define APE_LOCK_REQ_DRIVER 0x00001000
#define TG3_APE_LOCK_GRANT 0x004c
#define APE_LOCK_GRANT_DRIVER 0x00001000
-#define TG3_APE_SEG_SIG 0x4000
-#define APE_SEG_SIG_MAGIC 0x41504521
/* APE shared memory. Accessible through BAR1 */
+#define TG3_APE_SHMEM_BASE 0x4000
+#define TG3_APE_SEG_SIG 0x4000
+#define APE_SEG_SIG_MAGIC 0x41504521
#define TG3_APE_FW_STATUS 0x400c
#define APE_FW_STATUS_READY 0x00000100
#define TG3_APE_FW_FEATURES 0x4010
@@ -2327,6 +2328,8 @@
#define APE_FW_VERSION_REVMSK 0x0000ff00
#define APE_FW_VERSION_REVSFT 8
#define APE_FW_VERSION_BLDMSK 0x000000ff
+#define TG3_APE_SEG_MSG_BUF_OFF 0x401c
+#define TG3_APE_SEG_MSG_BUF_LEN 0x4020
#define TG3_APE_HOST_SEG_SIG 0x4200
#define APE_HOST_SEG_SIG_MAGIC 0x484f5354
#define TG3_APE_HOST_SEG_LEN 0x4204
@@ -2353,6 +2356,8 @@
#define APE_EVENT_STATUS_DRIVER_EVNT 0x00000010
#define APE_EVENT_STATUS_STATE_CHNGE 0x00000500
+#define APE_EVENT_STATUS_SCRTCHPD_READ 0x00001600
+#define APE_EVENT_STATUS_SCRTCHPD_WRITE 0x00001700
#define APE_EVENT_STATUS_STATE_START 0x00010000
#define APE_EVENT_STATUS_STATE_UNLOAD 0x00020000
#define APE_EVENT_STATUS_STATE_WOL 0x00030000
@@ -2671,6 +2676,40 @@ struct tg3_hw_stats {
u8 __reserved4[0xb00-0x9c8];
};
+#define TG3_SD_NUM_RECS 3
+#define TG3_OCIR_LEN (sizeof(struct tg3_ocir))
+#define TG3_OCIR_SIG_MAGIC 0x5253434f
+#define TG3_OCIR_FLAG_ACTIVE 0x00000001
+
+#define TG3_TEMP_CAUTION_OFFSET 0xc8
+#define TG3_TEMP_MAX_OFFSET 0xcc
+#define TG3_TEMP_SENSOR_OFFSET 0xd4
+
+
+struct tg3_ocir {
+ u32 signature;
+ u16 version_flags;
+ u16 refresh_int;
+ u32 refresh_tmr;
+ u32 update_tmr;
+ u32 dst_base_addr;
+ u16 src_hdr_offset;
+ u16 src_hdr_length;
+ u16 src_data_offset;
+ u16 src_data_length;
+ u16 dst_hdr_offset;
+ u16 dst_data_offset;
+ u16 dst_reg_upd_offset;
+ u16 dst_sem_offset;
+ u32 reserved1[2];
+ u32 port0_flags;
+ u32 port1_flags;
+ u32 port2_flags;
+ u32 port3_flags;
+ u32 reserved2[1];
+};
+
+
/* 'mapping' is superfluous as the chip does not write into
* the tx/rx post rings so we could just fetch it from there.
* But the cache behavior is better how we are doing it now.
@@ -3206,6 +3245,10 @@ struct tg3 {
const char *fw_needed;
const struct firmware *fw;
u32 fw_len; /* includes BSS */
+
+#if IS_ENABLED(CONFIG_HWMON)
+ struct device *hwmon_dev;
+#endif
};
#endif /* !(_T3_H) */
OpenPOWER on IntegriCloud