diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 81 |
1 files changed, 79 insertions, 2 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 1663e0b6b5a0..77ebae0ac64a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -8647,7 +8647,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params) MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC6, &rx_tx_in_reset); - if (!rx_tx_in_reset) { + if ((!rx_tx_in_reset) && + (params->link_flags & + PHY_INITIALIZED)) { bnx2x_warpcore_reset_lane(bp, phy, 1); bnx2x_warpcore_config_sfi(phy, params); bnx2x_warpcore_reset_lane(bp, phy, 0); @@ -10422,6 +10424,28 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x0); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) { + /* Disable MI_INT interrupt before setting LED4 + * source to constant off. + */ + if (REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4) & + NIG_MASK_MI_INT) { + params->link_flags |= + LINK_FLAGS_INT_DISABLED; + + bnx2x_bits_dis( + bp, + NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4, + NIG_MASK_MI_INT); + } + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x0); + } } break; case LED_MODE_ON: @@ -10468,6 +10492,28 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x20); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) { + /* Disable MI_INT interrupt before setting LED4 + * source to constant on. + */ + if (REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4) & + NIG_MASK_MI_INT) { + params->link_flags |= + LINK_FLAGS_INT_DISABLED; + + bnx2x_bits_dis( + bp, + NIG_REG_MASK_INTERRUPT_PORT0 + + params->port*4, + NIG_MASK_MI_INT); + } + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x20); + } } break; @@ -10532,6 +10578,22 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, val); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84834) { + /* Restore LED4 source to external link, + * and re-enable interrupts. + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x40); + if (params->link_flags & + LINK_FLAGS_INT_DISABLED) { + bnx2x_link_int_enable(params); + params->link_flags &= + ~LINK_FLAGS_INT_DISABLED; + } + } } break; } @@ -11791,6 +11853,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, phy->media_type = ETH_PHY_KR; phy->flags |= FLAGS_WC_DUAL_MODE; phy->supported &= (SUPPORTED_20000baseKR2_Full | + SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_FIBRE | SUPPORTED_Pause | @@ -12465,6 +12529,8 @@ int bnx2x_phy_init(struct link_params *params, struct link_vars *vars) vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; vars->mac_type = MAC_TYPE_NONE; vars->phy_flags = 0; + vars->check_kr2_recovery_cnt = 0; + params->link_flags = PHY_INITIALIZED; /* Driver opens NIG-BRB filters */ bnx2x_set_rx_filter(params, 1); /* Check if link flap can be avoided */ @@ -12629,6 +12695,7 @@ int bnx2x_lfa_reset(struct link_params *params, struct bnx2x *bp = params->bp; vars->link_up = 0; vars->phy_flags = 0; + params->link_flags &= ~PHY_INITIALIZED; if (!params->lfa_base) return bnx2x_link_reset(params, vars, 1); /* @@ -13349,6 +13416,7 @@ static void bnx2x_disable_kr2(struct link_params *params, vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; bnx2x_update_link_attr(params, vars->link_attr_sync); + vars->check_kr2_recovery_cnt = CHECK_KR2_RECOVERY_CNT; /* Restart AN on leading lane */ bnx2x_warpcore_restart_AN_KR(phy, params); } @@ -13377,6 +13445,15 @@ static void bnx2x_check_kr2_wa(struct link_params *params, return; } + /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery + * since some switches tend to reinit the AN process and clear the + * advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * and recovered many times + */ + if (vars->check_kr2_recovery_cnt > 0) { + vars->check_kr2_recovery_cnt--; + return; + } lane = bnx2x_get_warpcore_lane(phy, params); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, lane); @@ -13437,7 +13514,7 @@ void bnx2x_period_func(struct link_params *params, struct link_vars *vars) struct bnx2x_phy *phy = ¶ms->phy[INT_PHY]; bnx2x_set_aer_mmd(params, phy); if ((phy->supported & SUPPORTED_20000baseKR2_Full) && - (phy->speed_cap_mask & SPEED_20000)) + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) bnx2x_check_kr2_wa(params, vars, phy); bnx2x_check_over_curr(params, vars); if (vars->rx_tx_asic_rst) |
