diff options
Diffstat (limited to 'drivers/net/ethernet/atheros')
| -rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 188 | ||||
| -rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 335 | ||||
| -rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 23 |
3 files changed, 346 insertions, 200 deletions
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c index a17b5311dcec..9a5b0f398f78 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c @@ -457,6 +457,32 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, return atl1c_write_phy_core(hw, true, dev_addr, reg_addr, phy_data); } +int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data) +{ + int err; + + err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr); + if (unlikely(err)) + return err; + else + err = atl1c_read_phy_reg(hw, MII_DBG_DATA, phy_data); + + return err; +} + +int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data) +{ + int err; + + err = atl1c_write_phy_reg(hw, MII_DBG_ADDR, reg_addr); + if (unlikely(err)) + return err; + else + err = atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data); + + return err; +} + /* * Configures PHY autoneg and flow control advertisement settings * @@ -499,119 +525,107 @@ static int atl1c_phy_setup_adv(struct atl1c_hw *hw) void atl1c_phy_disable(struct atl1c_hw *hw) { - AT_WRITE_REGW(hw, REG_GPHY_CTRL, - GPHY_CTRL_PW_WOL_DIS | GPHY_CTRL_EXT_RESET); + u32 phy_ctrl_data; + + AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data); + phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS); + phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE | + GPHY_CTRL_HIB_EN | GPHY_CTRL_PHY_IDDQ | + GPHY_CTRL_PWDOWN_HW; + AT_WRITE_REGW(hw, REG_GPHY_CTRL, phy_ctrl_data); } -static void atl1c_phy_magic_data(struct atl1c_hw *hw) -{ - u16 data; - - data = ANA_LOOP_SEL_10BT | ANA_EN_MASK_TB | ANA_EN_10BT_IDLE | - ((1 & ANA_INTERVAL_SEL_TIMER_MASK) << - ANA_INTERVAL_SEL_TIMER_SHIFT); - - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_18); - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - - data = (2 & ANA_SERDES_CDR_BW_MASK) | ANA_MS_PAD_DBG | - ANA_SERDES_EN_DEEM | ANA_SERDES_SEL_HSP | ANA_SERDES_EN_PLL | - ANA_SERDES_EN_LCKDT; - - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_5); - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - - data = (44 & ANA_LONG_CABLE_TH_100_MASK) | - ((33 & ANA_SHORT_CABLE_TH_100_MASK) << - ANA_SHORT_CABLE_TH_100_SHIFT) | ANA_BP_BAD_LINK_ACCUM | - ANA_BP_SMALL_BW; - - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_54); - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - - data = (11 & ANA_IECHO_ADJ_MASK) | ((11 & ANA_IECHO_ADJ_MASK) << - ANA_IECHO_ADJ_2_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << - ANA_IECHO_ADJ_1_SHIFT) | ((8 & ANA_IECHO_ADJ_MASK) << - ANA_IECHO_ADJ_0_SHIFT); - - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_4); - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - - data = ANA_RESTART_CAL | ((7 & ANA_MANUL_SWICH_ON_MASK) << - ANA_MANUL_SWICH_ON_SHIFT) | ANA_MAN_ENABLE | - ANA_SEL_HSP | ANA_EN_HB | ANA_OEN_125M; - - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_0); - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - - if (hw->ctrl_flags & ATL1C_HIB_DISABLE) { - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_41); - if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) - return; - data &= ~ANA_TOP_PS_EN; - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - - atl1c_write_phy_reg(hw, MII_DBG_ADDR, MII_ANA_CTRL_11); - if (atl1c_read_phy_reg(hw, MII_DBG_DATA, &data) != 0) - return; - data &= ~ANA_PS_HIB_EN; - atl1c_write_phy_reg(hw, MII_DBG_DATA, data); - } -} int atl1c_phy_reset(struct atl1c_hw *hw) { struct atl1c_adapter *adapter = hw->adapter; struct pci_dev *pdev = adapter->pdev; u16 phy_data; - u32 phy_ctrl_data = GPHY_CTRL_DEFAULT; - u32 mii_ier_data = IER_LINK_UP | IER_LINK_DOWN; + u32 phy_ctrl_data, lpi_ctrl; int err; - if (hw->ctrl_flags & ATL1C_HIB_DISABLE) - phy_ctrl_data &= ~GPHY_CTRL_HIB_EN; - + /* reset PHY core */ + AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data); + phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_PHY_IDDQ | + GPHY_CTRL_GATE_25M_EN | GPHY_CTRL_PWDOWN_HW | GPHY_CTRL_CLS); + phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST; + if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) + phy_ctrl_data |= (GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE); + else + phy_ctrl_data &= ~(GPHY_CTRL_HIB_EN | GPHY_CTRL_HIB_PULSE); AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); AT_WRITE_FLUSH(hw); - msleep(40); - phy_ctrl_data |= GPHY_CTRL_EXT_RESET; - AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + udelay(10); + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data | GPHY_CTRL_EXT_RESET); AT_WRITE_FLUSH(hw); - msleep(10); + udelay(10 * GPHY_CTRL_EXT_RST_TO); /* delay 800us */ + /* switch clock */ if (hw->nic_type == athr_l2c_b) { - atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x0A); - atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data); - atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xDFFF); + atl1c_read_phy_dbg(hw, MIIDBG_CFGLPSPD, &phy_data); + atl1c_write_phy_dbg(hw, MIIDBG_CFGLPSPD, + phy_data & ~CFGLPSPD_RSTCNT_CLK125SW); } - if (hw->nic_type == athr_l2c_b || - hw->nic_type == athr_l2c_b2 || - hw->nic_type == athr_l1d || - hw->nic_type == athr_l1d_2) { - atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x3B); - atl1c_read_phy_reg(hw, MII_DBG_DATA, &phy_data); - atl1c_write_phy_reg(hw, MII_DBG_DATA, phy_data & 0xFFF7); - msleep(20); + /* tx-half amplitude issue fix */ + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { + atl1c_read_phy_dbg(hw, MIIDBG_CABLE1TH_DET, &phy_data); + phy_data |= CABLE1TH_DET_EN; + atl1c_write_phy_dbg(hw, MIIDBG_CABLE1TH_DET, phy_data); } - if (hw->nic_type == athr_l1d) { - atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29); - atl1c_write_phy_reg(hw, MII_DBG_DATA, 0x929D); + + /* clear bit3 of dbgport 3B to lower voltage */ + if (!(hw->ctrl_flags & ATL1C_HIB_DISABLE)) { + if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2) { + atl1c_read_phy_dbg(hw, MIIDBG_VOLT_CTRL, &phy_data); + phy_data &= ~VOLT_CTRL_SWLOWEST; + atl1c_write_phy_dbg(hw, MIIDBG_VOLT_CTRL, phy_data); + } + /* power saving config */ + phy_data = + hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 ? + L1D_LEGCYPS_DEF : L1C_LEGCYPS_DEF; + atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, phy_data); + /* hib */ + atl1c_write_phy_dbg(hw, MIIDBG_SYSMODCTRL, + SYSMODCTRL_IECHOADJ_DEF); + } else { + /* disable pws */ + atl1c_read_phy_dbg(hw, MIIDBG_LEGCYPS, &phy_data); + atl1c_write_phy_dbg(hw, MIIDBG_LEGCYPS, + phy_data & ~LEGCYPS_EN); + /* disable hibernate */ + atl1c_read_phy_dbg(hw, MIIDBG_HIBNEG, &phy_data); + atl1c_write_phy_dbg(hw, MIIDBG_HIBNEG, + phy_data & HIBNEG_PSHIB_EN); } - if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b2 - || hw->nic_type == athr_l2c) { - atl1c_write_phy_reg(hw, MII_DBG_ADDR, 0x29); - atl1c_write_phy_reg(hw, MII_DBG_DATA, 0xB6DD); + /* disable AZ(EEE) by default */ + if (hw->nic_type == athr_l1d || hw->nic_type == athr_l1d_2 || + hw->nic_type == athr_l2c_b2) { + AT_READ_REG(hw, REG_LPI_CTRL, &lpi_ctrl); + AT_WRITE_REG(hw, REG_LPI_CTRL, lpi_ctrl & ~LPI_CTRL_EN); + atl1c_write_phy_ext(hw, MIIEXT_ANEG, MIIEXT_LOCAL_EEEADV, 0); + atl1c_write_phy_ext(hw, MIIEXT_PCS, MIIEXT_CLDCTRL3, + L2CB_CLDCTRL3); } - err = atl1c_write_phy_reg(hw, MII_IER, mii_ier_data); + + /* other debug port to set */ + atl1c_write_phy_dbg(hw, MIIDBG_ANACTRL, ANACTRL_DEF); + atl1c_write_phy_dbg(hw, MIIDBG_SRDSYSMOD, SRDSYSMOD_DEF); + atl1c_write_phy_dbg(hw, MIIDBG_TST10BTCFG, TST10BTCFG_DEF); + /* UNH-IOL test issue, set bit7 */ + atl1c_write_phy_dbg(hw, MIIDBG_TST100BTCFG, + TST100BTCFG_DEF | TST100BTCFG_LITCH_EN); + + /* set phy interrupt mask */ + phy_data = IER_LINK_UP | IER_LINK_DOWN; + err = atl1c_write_phy_reg(hw, MII_IER, phy_data); if (err) { if (netif_msg_hw(adapter)) dev_err(&pdev->dev, "Error enable PHY linkChange Interrupt\n"); return err; } - if (!(hw->ctrl_flags & ATL1C_FPGA_VERSION)) - atl1c_phy_magic_data(hw); return 0; } diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index 113e67bf179b..fba7eb5db2ed 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h @@ -60,6 +60,9 @@ int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr, u16 reg_addr, u16 *phy_data); int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, u16 reg_addr, u16 phy_data); +int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data); +int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data); + /* register definition */ #define REG_DEVICE_CAP 0x5C #define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 @@ -222,41 +225,32 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, #define IRQ_MODRT_RX_TIMER_SHIFT 16 #define REG_GPHY_CTRL 0x140C -#define GPHY_CTRL_EXT_RESET 0x1 -#define GPHY_CTRL_RTL_MODE 0x2 -#define GPHY_CTRL_LED_MODE 0x4 -#define GPHY_CTRL_ANEG_NOW 0x8 -#define GPHY_CTRL_REV_ANEG 0x10 -#define GPHY_CTRL_GATE_25M_EN 0x20 -#define GPHY_CTRL_LPW_EXIT 0x40 -#define GPHY_CTRL_PHY_IDDQ 0x80 -#define GPHY_CTRL_PHY_IDDQ_DIS 0x100 -#define GPHY_CTRL_GIGA_DIS 0x200 -#define GPHY_CTRL_HIB_EN 0x400 -#define GPHY_CTRL_HIB_PULSE 0x800 -#define GPHY_CTRL_SEL_ANA_RST 0x1000 -#define GPHY_CTRL_PHY_PLL_ON 0x2000 -#define GPHY_CTRL_PWDOWN_HW 0x4000 -#define GPHY_CTRL_PHY_PLL_BYPASS 0x8000 - -#define GPHY_CTRL_DEFAULT ( \ - GPHY_CTRL_SEL_ANA_RST |\ - GPHY_CTRL_HIB_PULSE |\ - GPHY_CTRL_HIB_EN) - -#define GPHY_CTRL_PW_WOL_DIS ( \ - GPHY_CTRL_SEL_ANA_RST |\ - GPHY_CTRL_HIB_PULSE |\ - GPHY_CTRL_HIB_EN |\ - GPHY_CTRL_PWDOWN_HW |\ - GPHY_CTRL_PHY_IDDQ) - -#define GPHY_CTRL_POWER_SAVING ( \ - GPHY_CTRL_SEL_ANA_RST |\ - GPHY_CTRL_HIB_EN |\ - GPHY_CTRL_HIB_PULSE |\ - GPHY_CTRL_PWDOWN_HW |\ - GPHY_CTRL_PHY_IDDQ) +#define GPHY_CTRL_ADDR_MASK 0x1FUL +#define GPHY_CTRL_ADDR_SHIFT 19 +#define GPHY_CTRL_BP_VLTGSW BIT(18) +#define GPHY_CTRL_100AB_EN BIT(17) +#define GPHY_CTRL_10AB_EN BIT(16) +#define GPHY_CTRL_PHY_PLL_BYPASS BIT(15) +#define GPHY_CTRL_PWDOWN_HW BIT(14) /* affect MAC&PHY, to low pw */ +#define GPHY_CTRL_PHY_PLL_ON BIT(13) /* 1:pll always on, 0:can sw */ +#define GPHY_CTRL_SEL_ANA_RST BIT(12) +#define GPHY_CTRL_HIB_PULSE BIT(11) +#define GPHY_CTRL_HIB_EN BIT(10) +#define GPHY_CTRL_GIGA_DIS BIT(9) +#define GPHY_CTRL_PHY_IDDQ_DIS BIT(8) /* pw on RST */ +#define GPHY_CTRL_PHY_IDDQ BIT(7) /* bit8 affect bit7 while rb */ +#define GPHY_CTRL_LPW_EXIT BIT(6) +#define GPHY_CTRL_GATE_25M_EN BIT(5) +#define GPHY_CTRL_REV_ANEG BIT(4) +#define GPHY_CTRL_ANEG_NOW BIT(3) +#define GPHY_CTRL_LED_MODE BIT(2) +#define GPHY_CTRL_RTL_MODE BIT(1) +#define GPHY_CTRL_EXT_RESET BIT(0) /* 1:out of DSP RST status */ +#define GPHY_CTRL_EXT_RST_TO 80 /* 800us atmost */ +#define GPHY_CTRL_CLS (\ + GPHY_CTRL_LED_MODE |\ + GPHY_CTRL_100AB_EN |\ + GPHY_CTRL_PHY_PLL_ON) /* Block IDLE Status Register */ #define REG_IDLE_STATUS 0x1410 @@ -350,6 +344,26 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, #define SERDES_LOCK_DETECT_EN BIT(1) #define SERDES_LOCK_DETECT BIT(0) +#define REG_LPI_DECISN_TIMER 0x143C +#define L2CB_LPI_DESISN_TIMER 0x7D00 + +#define REG_LPI_CTRL 0x1440 +#define LPI_CTRL_CHK_DA BIT(31) +#define LPI_CTRL_ENH_TO_MASK 0x1FFFUL +#define LPI_CTRL_ENH_TO_SHIFT 12 +#define LPI_CTRL_ENH_TH_MASK 0x1FUL +#define LPI_CTRL_ENH_TH_SHIFT 6 +#define LPI_CTRL_ENH_EN BIT(5) +#define LPI_CTRL_CHK_RX BIT(4) +#define LPI_CTRL_CHK_STATE BIT(3) +#define LPI_CTRL_GMII BIT(2) +#define LPI_CTRL_TO_PHY BIT(1) +#define LPI_CTRL_EN BIT(0) + +#define REG_LPI_WAIT 0x1444 +#define LPI_WAIT_TIMER_MASK 0xFFFFUL +#define LPI_WAIT_TIMER_SHIFT 0 + /* MAC Control Register */ #define REG_MAC_CTRL 0x1480 #define MAC_CTRL_TX_EN 0x1 @@ -813,73 +827,188 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, #define MII_DBG_ADDR 0x1D #define MII_DBG_DATA 0x1E -#define MII_ANA_CTRL_0 0x0 -#define ANA_RESTART_CAL 0x0001 -#define ANA_MANUL_SWICH_ON_SHIFT 0x1 -#define ANA_MANUL_SWICH_ON_MASK 0xF -#define ANA_MAN_ENABLE 0x0020 -#define ANA_SEL_HSP 0x0040 -#define ANA_EN_HB 0x0080 -#define ANA_EN_HBIAS 0x0100 -#define ANA_OEN_125M 0x0200 -#define ANA_EN_LCKDT 0x0400 -#define ANA_LCKDT_PHY 0x0800 -#define ANA_AFE_MODE 0x1000 -#define ANA_VCO_SLOW 0x2000 -#define ANA_VCO_FAST 0x4000 -#define ANA_SEL_CLK125M_DSP 0x8000 - -#define MII_ANA_CTRL_4 0x4 -#define ANA_IECHO_ADJ_MASK 0xF -#define ANA_IECHO_ADJ_3_SHIFT 0 -#define ANA_IECHO_ADJ_2_SHIFT 4 -#define ANA_IECHO_ADJ_1_SHIFT 8 -#define ANA_IECHO_ADJ_0_SHIFT 12 - -#define MII_ANA_CTRL_5 0x5 -#define ANA_SERDES_CDR_BW_SHIFT 0 -#define ANA_SERDES_CDR_BW_MASK 0x3 -#define ANA_MS_PAD_DBG 0x0004 -#define ANA_SPEEDUP_DBG 0x0008 -#define ANA_SERDES_TH_LOS_SHIFT 4 -#define ANA_SERDES_TH_LOS_MASK 0x3 -#define ANA_SERDES_EN_DEEM 0x0040 -#define ANA_SERDES_TXELECIDLE 0x0080 -#define ANA_SERDES_BEACON 0x0100 -#define ANA_SERDES_HALFTXDR 0x0200 -#define ANA_SERDES_SEL_HSP 0x0400 -#define ANA_SERDES_EN_PLL 0x0800 -#define ANA_SERDES_EN 0x1000 -#define ANA_SERDES_EN_LCKDT 0x2000 - -#define MII_ANA_CTRL_11 0xB -#define ANA_PS_HIB_EN 0x8000 - -#define MII_ANA_CTRL_18 0x12 -#define ANA_TEST_MODE_10BT_01SHIFT 0 -#define ANA_TEST_MODE_10BT_01MASK 0x3 -#define ANA_LOOP_SEL_10BT 0x0004 -#define ANA_RGMII_MODE_SW 0x0008 -#define ANA_EN_LONGECABLE 0x0010 -#define ANA_TEST_MODE_10BT_2 0x0020 -#define ANA_EN_10BT_IDLE 0x0400 -#define ANA_EN_MASK_TB 0x0800 -#define ANA_TRIGGER_SEL_TIMER_SHIFT 12 -#define ANA_TRIGGER_SEL_TIMER_MASK 0x3 -#define ANA_INTERVAL_SEL_TIMER_SHIFT 14 -#define ANA_INTERVAL_SEL_TIMER_MASK 0x3 - -#define MII_ANA_CTRL_41 0x29 -#define ANA_TOP_PS_EN 0x8000 - -#define MII_ANA_CTRL_54 0x36 -#define ANA_LONG_CABLE_TH_100_SHIFT 0 -#define ANA_LONG_CABLE_TH_100_MASK 0x3F -#define ANA_DESERVED 0x0040 -#define ANA_EN_LIT_CH 0x0080 -#define ANA_SHORT_CABLE_TH_100_SHIFT 8 -#define ANA_SHORT_CABLE_TH_100_MASK 0x3F -#define ANA_BP_BAD_LINK_ACCUM 0x4000 -#define ANA_BP_SMALL_BW 0x8000 +/***************************** debug port *************************************/ + +#define MIIDBG_ANACTRL 0x00 +#define ANACTRL_CLK125M_DELAY_EN 0x8000 +#define ANACTRL_VCO_FAST 0x4000 +#define ANACTRL_VCO_SLOW 0x2000 +#define ANACTRL_AFE_MODE_EN 0x1000 +#define ANACTRL_LCKDET_PHY 0x800 +#define ANACTRL_LCKDET_EN 0x400 +#define ANACTRL_OEN_125M 0x200 +#define ANACTRL_HBIAS_EN 0x100 +#define ANACTRL_HB_EN 0x80 +#define ANACTRL_SEL_HSP 0x40 +#define ANACTRL_CLASSA_EN 0x20 +#define ANACTRL_MANUSWON_SWR_MASK 3U +#define ANACTRL_MANUSWON_SWR_SHIFT 2 +#define ANACTRL_MANUSWON_SWR_2V 0 +#define ANACTRL_MANUSWON_SWR_1P9V 1 +#define ANACTRL_MANUSWON_SWR_1P8V 2 +#define ANACTRL_MANUSWON_SWR_1P7V 3 +#define ANACTRL_MANUSWON_BW3_4M 0x2 +#define ANACTRL_RESTART_CAL 0x1 +#define ANACTRL_DEF 0x02EF + +#define MIIDBG_SYSMODCTRL 0x04 +#define SYSMODCTRL_IECHOADJ_PFMH_PHY 0x8000 +#define SYSMODCTRL_IECHOADJ_BIASGEN 0x4000 +#define SYSMODCTRL_IECHOADJ_PFML_PHY 0x2000 +#define SYSMODCTRL_IECHOADJ_PS_MASK 3U +#define SYSMODCTRL_IECHOADJ_PS_SHIFT 10 +#define SYSMODCTRL_IECHOADJ_PS_40 3 +#define SYSMODCTRL_IECHOADJ_PS_20 2 +#define SYSMODCTRL_IECHOADJ_PS_0 1 +#define SYSMODCTRL_IECHOADJ_10BT_100MV 0x40 /* 1:100mv, 0:200mv */ +#define SYSMODCTRL_IECHOADJ_HLFAP_MASK 3U +#define SYSMODCTRL_IECHOADJ_HLFAP_SHIFT 4 +#define SYSMODCTRL_IECHOADJ_VDFULBW 0x8 +#define SYSMODCTRL_IECHOADJ_VDBIASHLF 0x4 +#define SYSMODCTRL_IECHOADJ_VDAMPHLF 0x2 +#define SYSMODCTRL_IECHOADJ_VDLANSW 0x1 +#define SYSMODCTRL_IECHOADJ_DEF 0x88BB /* ???? */ + +/* for l1d & l2cb */ +#define SYSMODCTRL_IECHOADJ_CUR_ADD 0x8000 +#define SYSMODCTRL_IECHOADJ_CUR_MASK 7U +#define SYSMODCTRL_IECHOADJ_CUR_SHIFT 12 +#define SYSMODCTRL_IECHOADJ_VOL_MASK 0xFU +#define SYSMODCTRL_IECHOADJ_VOL_SHIFT 8 +#define SYSMODCTRL_IECHOADJ_VOL_17ALL 3 +#define SYSMODCTRL_IECHOADJ_VOL_100M15 1 +#define SYSMODCTRL_IECHOADJ_VOL_10M17 0 +#define SYSMODCTRL_IECHOADJ_BIAS1_MASK 0xFU +#define SYSMODCTRL_IECHOADJ_BIAS1_SHIFT 4 +#define SYSMODCTRL_IECHOADJ_BIAS2_MASK 0xFU +#define SYSMODCTRL_IECHOADJ_BIAS2_SHIFT 0 +#define L1D_SYSMODCTRL_IECHOADJ_DEF 0x4FBB + +#define MIIDBG_SRDSYSMOD 0x05 +#define SRDSYSMOD_LCKDET_EN 0x2000 +#define SRDSYSMOD_PLL_EN 0x800 +#define SRDSYSMOD_SEL_HSP 0x400 +#define SRDSYSMOD_HLFTXDR 0x200 +#define SRDSYSMOD_TXCLK_DELAY_EN 0x100 +#define SRDSYSMOD_TXELECIDLE 0x80 +#define SRDSYSMOD_DEEMP_EN 0x40 +#define SRDSYSMOD_MS_PAD 0x4 +#define SRDSYSMOD_CDR_ADC_VLTG 0x2 +#define SRDSYSMOD_CDR_DAC_1MA 0x1 +#define SRDSYSMOD_DEF 0x2C46 + +#define MIIDBG_CFGLPSPD 0x0A +#define CFGLPSPD_RSTCNT_MASK 3U +#define CFGLPSPD_RSTCNT_SHIFT 14 +#define CFGLPSPD_RSTCNT_CLK125SW 0x2000 + +#define MIIDBG_HIBNEG 0x0B +#define HIBNEG_PSHIB_EN 0x8000 +#define HIBNEG_WAKE_BOTH 0x4000 +#define HIBNEG_ONOFF_ANACHG_SUDEN 0x2000 +#define HIBNEG_HIB_PULSE 0x1000 +#define HIBNEG_GATE_25M_EN 0x800 +#define HIBNEG_RST_80U 0x400 +#define HIBNEG_RST_TIMER_MASK 3U +#define HIBNEG_RST_TIMER_SHIFT 8 +#define HIBNEG_GTX_CLK_DELAY_MASK 3U +#define HIBNEG_GTX_CLK_DELAY_SHIFT 5 +#define HIBNEG_BYPSS_BRKTIMER 0x10 +#define HIBNEG_DEF 0xBC40 + +#define MIIDBG_TST10BTCFG 0x12 +#define TST10BTCFG_INTV_TIMER_MASK 3U +#define TST10BTCFG_INTV_TIMER_SHIFT 14 +#define TST10BTCFG_TRIGER_TIMER_MASK 3U +#define TST10BTCFG_TRIGER_TIMER_SHIFT 12 +#define TST10BTCFG_DIV_MAN_MLT3_EN 0x800 +#define TST10BTCFG_OFF_DAC_IDLE 0x400 +#define TST10BTCFG_LPBK_DEEP 0x4 /* 1:deep,0:shallow */ +#define TST10BTCFG_DEF 0x4C04 + +#define MIIDBG_AZ_ANADECT 0x15 +#define AZ_ANADECT_10BTRX_TH 0x8000 +#define AZ_ANADECT_BOTH_01CHNL 0x4000 +#define AZ_ANADECT_INTV_MASK 0x3FU +#define AZ_ANADECT_INTV_SHIFT 8 +#define AZ_ANADECT_THRESH_MASK 0xFU +#define AZ_ANADECT_THRESH_SHIFT 4 +#define AZ_ANADECT_CHNL_MASK 0xFU +#define AZ_ANADECT_CHNL_SHIFT 0 +#define AZ_ANADECT_DEF 0x3220 +#define AZ_ANADECT_LONG 0xb210 + +#define MIIDBG_MSE16DB 0x18 /* l1d */ +#define L1D_MSE16DB_UP 0x05EA +#define L1D_MSE16DB_DOWN 0x02EA + +#define MIIDBG_LEGCYPS 0x29 +#define LEGCYPS_EN 0x8000 +#define LEGCYPS_DAC_AMP1000_MASK 7U +#define LEGCYPS_DAC_AMP1000_SHIFT 12 +#define LEGCYPS_DAC_AMP100_MASK 7U +#define LEGCYPS_DAC_AMP100_SHIFT 9 +#define LEGCYPS_DAC_AMP10_MASK 7U +#define LEGCYPS_DAC_AMP10_SHIFT 6 +#define LEGCYPS_UNPLUG_TIMER_MASK 7U +#define LEGCYPS_UNPLUG_TIMER_SHIFT 3 +#define LEGCYPS_UNPLUG_DECT_EN 0x4 +#define LEGCYPS_ECNC_PS_EN 0x1 +#define L1D_LEGCYPS_DEF 0x129D +#define L1C_LEGCYPS_DEF 0x36DD + +#define MIIDBG_TST100BTCFG 0x36 +#define TST100BTCFG_NORMAL_BW_EN 0x8000 +#define TST100BTCFG_BADLNK_BYPASS 0x4000 +#define TST100BTCFG_SHORTCABL_TH_MASK 0x3FU +#define TST100BTCFG_SHORTCABL_TH_SHIFT 8 +#define TST100BTCFG_LITCH_EN 0x80 +#define TST100BTCFG_VLT_SW 0x40 +#define TST100BTCFG_LONGCABL_TH_MASK 0x3FU +#define TST100BTCFG_LONGCABL_TH_SHIFT 0 +#define TST100BTCFG_DEF 0xE12C + +#define MIIDBG_VOLT_CTRL 0x3B /* only for l2cb 1 & 2 */ +#define VOLT_CTRL_CABLE1TH_MASK 0x1FFU +#define VOLT_CTRL_CABLE1TH_SHIFT 7 +#define VOLT_CTRL_AMPCTRL_MASK 3U +#define VOLT_CTRL_AMPCTRL_SHIFT 5 +#define VOLT_CTRL_SW_BYPASS 0x10 +#define VOLT_CTRL_SWLOWEST 0x8 +#define VOLT_CTRL_DACAMP10_MASK 7U +#define VOLT_CTRL_DACAMP10_SHIFT 0 + +#define MIIDBG_CABLE1TH_DET 0x3E +#define CABLE1TH_DET_EN 0x8000 + + +/******* dev 3 *********/ +#define MIIEXT_PCS 3 + +#define MIIEXT_CLDCTRL3 0x8003 +#define CLDCTRL3_BP_CABLE1TH_DET_GT 0x8000 +#define CLDCTRL3_AZ_DISAMP 0x1000 +#define L2CB_CLDCTRL3 0x4D19 +#define L1D_CLDCTRL3 0xDD19 + +#define MIIEXT_CLDCTRL6 0x8006 +#define CLDCTRL6_CAB_LEN_MASK 0x1FFU +#define CLDCTRL6_CAB_LEN_SHIFT 0 +#define CLDCTRL6_CAB_LEN_SHORT 0x50 + +/********* dev 7 **********/ +#define MIIEXT_ANEG 7 + +#define MIIEXT_LOCAL_EEEADV 0x3C +#define LOCAL_EEEADV_1000BT 0x4 +#define LOCAL_EEEADV_100BT 0x2 + +#define MIIEXT_REMOTE_EEEADV 0x3D +#define REMOTE_EEEADV_1000BT 0x4 +#define REMOTE_EEEADV_100BT 0x2 + +#define MIIEXT_EEE_ANEG 0x8000 +#define EEE_ANEG_1000M 0x4 +#define EEE_ANEG_100M 0x2 #endif /*_ATL1C_HW_H_*/ diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 8a1d2f90eb1a..995da221fc5a 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -2314,6 +2314,7 @@ static int atl1c_suspend(struct device *dev) u32 wol_ctrl_data = 0; u16 mii_intr_status_data = 0; u32 wufc = adapter->wol; + u32 phy_ctrl_data; atl1c_disable_l0s_l1(hw); if (netif_running(netdev)) { @@ -2328,6 +2329,7 @@ static int atl1c_suspend(struct device *dev) AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data); + AT_READ_REG(hw, REG_GPHY_CTRL, &phy_ctrl_data); master_ctrl_data &= ~MASTER_CTRL_CLK_SEL_DIS; mac_ctrl_data &= ~(MAC_CTRL_PRMLEN_MASK << MAC_CTRL_PRMLEN_SHIFT); @@ -2336,9 +2338,13 @@ static int atl1c_suspend(struct device *dev) MAC_CTRL_PRMLEN_SHIFT); mac_ctrl_data &= ~(MAC_CTRL_SPEED_MASK << MAC_CTRL_SPEED_SHIFT); mac_ctrl_data &= ~MAC_CTRL_DUPLX; + phy_ctrl_data &= ~(GPHY_CTRL_EXT_RESET | GPHY_CTRL_CLS); + phy_ctrl_data |= GPHY_CTRL_SEL_ANA_RST | GPHY_CTRL_HIB_PULSE | + GPHY_CTRL_HIB_EN; if (wufc) { mac_ctrl_data |= MAC_CTRL_RX_EN; + phy_ctrl_data |= GPHY_CTRL_EXT_RESET; if (adapter->link_speed == SPEED_1000 || adapter->link_speed == SPEED_0) { mac_ctrl_data |= atl1c_mac_speed_1000 << @@ -2381,23 +2387,20 @@ static int atl1c_suspend(struct device *dev) dev_dbg(&pdev->dev, "%s: suspend MAC=0x%x\n", atl1c_driver_name, mac_ctrl_data); - AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); - AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); - AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); - - AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT | - GPHY_CTRL_EXT_RESET); } else { - AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING); master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS; mac_ctrl_data |= atl1c_mac_speed_10_100 << MAC_CTRL_SPEED_SHIFT; mac_ctrl_data |= MAC_CTRL_DUPLX; - AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); - AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); - AT_WRITE_REG(hw, REG_WOL_CTRL, 0); + phy_ctrl_data |= GPHY_CTRL_PHY_IDDQ | GPHY_CTRL_PWDOWN_HW; + wol_ctrl_data = 0; hw->phy_configured = false; /* re-init PHY when resume */ } + AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); + AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data); + AT_WRITE_REG(hw, REG_GPHY_CTRL, phy_ctrl_data); + AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data); + return 0; } |
