summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/8390/ne3210.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/8390/ne3210.c')
-rw-r--r--drivers/net/ethernet/8390/ne3210.c346
1 files changed, 0 insertions, 346 deletions
diff --git a/drivers/net/ethernet/8390/ne3210.c b/drivers/net/ethernet/8390/ne3210.c
deleted file mode 100644
index ebcdb52ec739..000000000000
--- a/drivers/net/ethernet/8390/ne3210.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- ne3210.c
-
- Linux driver for Novell NE3210 EISA Network Adapter
-
- Copyright (C) 1998, Paul Gortmaker.
-
- This software may be used and distributed according to the terms
- of the GNU General Public License, incorporated herein by reference.
-
- Information and Code Sources:
-
- 1) Based upon my other EISA 8390 drivers (lne390, es3210, smc-ultra32)
- 2) The existing myriad of other Linux 8390 drivers by Donald Becker.
- 3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
-
- The NE3210 is an EISA shared memory NS8390 implementation. Shared
- memory address > 1MB should work with this driver.
-
- Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
- around (or perhaps there are some defective/backwards cards ???)
-
- This driver WILL NOT WORK FOR THE NE3200 - it is completely different
- and does not use an 8390 at all.
-
- Updated to EISA probing API 5/2003 by Marc Zyngier.
-*/
-
-#include <linux/module.h>
-#include <linux/eisa.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-
-#include "8390.h"
-
-#define DRV_NAME "ne3210"
-
-static void ne3210_reset_8390(struct net_device *dev);
-
-static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page);
-static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset);
-static void ne3210_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page);
-
-#define NE3210_START_PG 0x00 /* First page of TX buffer */
-#define NE3210_STOP_PG 0x80 /* Last page +1 of RX ring */
-
-#define NE3210_IO_EXTENT 0x20
-#define NE3210_SA_PROM 0x16 /* Start of e'net addr. */
-#define NE3210_RESET_PORT 0xc84
-#define NE3210_NIC_OFFSET 0x00 /* Hello, the 8390 is *here* */
-
-#define NE3210_ADDR0 0x00 /* 3 byte vendor prefix */
-#define NE3210_ADDR1 0x00
-#define NE3210_ADDR2 0x1b
-
-#define NE3210_CFG1 0xc84 /* NB: 0xc84 is also "reset" port. */
-#define NE3210_CFG2 0xc90
-#define NE3210_CFG_EXTENT (NE3210_CFG2 - NE3210_CFG1 + 1)
-
-/*
- * You can OR any of the following bits together and assign it
- * to NE3210_DEBUG to get verbose driver info during operation.
- * Currently only the probe one is implemented.
- */
-
-#define NE3210_D_PROBE 0x01
-#define NE3210_D_RX_PKT 0x02
-#define NE3210_D_TX_PKT 0x04
-#define NE3210_D_IRQ 0x08
-
-#define NE3210_DEBUG 0x0
-
-static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
-static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0};
-static const char * const ifmap[] __initconst = {"UTP", "?", "BNC", "AUI"};
-static int ifmap_val[] __initdata = {
- IF_PORT_10BASET,
- IF_PORT_UNKNOWN,
- IF_PORT_10BASE2,
- IF_PORT_AUI,
-};
-
-static int __init ne3210_eisa_probe (struct device *device)
-{
- unsigned long ioaddr, phys_mem;
- int i, retval, port_index;
- struct eisa_device *edev = to_eisa_device (device);
- struct net_device *dev;
-
- /* Allocate dev->priv and fill in 8390 specific dev fields. */
- if (!(dev = alloc_ei_netdev ())) {
- printk ("ne3210.c: unable to allocate memory for dev!\n");
- return -ENOMEM;
- }
-
- SET_NETDEV_DEV(dev, device);
- dev_set_drvdata(device, dev);
- ioaddr = edev->base_addr;
-
- if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) {
- retval = -EBUSY;
- goto out;
- }
-
- if (!request_region(ioaddr + NE3210_CFG1,
- NE3210_CFG_EXTENT, DRV_NAME)) {
- retval = -EBUSY;
- goto out1;
- }
-
-#if NE3210_DEBUG & NE3210_D_PROBE
- printk("ne3210-debug: probe at %#x, ID %s\n", ioaddr, edev->id.sig);
- printk("ne3210-debug: config regs: %#x %#x\n",
- inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2));
-#endif
-
- port_index = inb(ioaddr + NE3210_CFG2) >> 6;
- for (i = 0; i < ETH_ALEN; i++)
- dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
- printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n",
- edev->slot, ifmap[port_index], dev->dev_addr);
-
- /* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
- dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
- printk("ne3210.c: using IRQ %d, ", dev->irq);
-
- retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
- if (retval) {
- printk (" unable to get IRQ %d.\n", dev->irq);
- goto out2;
- }
-
- phys_mem = shmem_map[inb(ioaddr + NE3210_CFG2) & 0x07] * 0x1000;
-
- /*
- BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
- the card mem within the region covered by `normal' RAM !!!
- */
- if (phys_mem > 1024*1024) { /* phys addr > 1MB */
- if (phys_mem < virt_to_phys(high_memory)) {
- printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n");
- printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n");
- printk(KERN_CRIT "ne3210.c: or to an address above 0x%llx.\n",
- (u64)virt_to_phys(high_memory));
- printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n");
- retval = -EINVAL;
- goto out3;
- }
- }
-
- if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
- printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
- phys_mem);
- goto out3;
- }
-
- printk("%dkB memory at physical address %#lx\n",
- NE3210_STOP_PG/4, phys_mem);
-
- ei_status.mem = ioremap(phys_mem, NE3210_STOP_PG*0x100);
- if (!ei_status.mem) {
- printk(KERN_ERR "ne3210.c: Unable to remap card memory !!\n");
- printk(KERN_ERR "ne3210.c: Driver NOT installed.\n");
- retval = -EAGAIN;
- goto out4;
- }
- printk("ne3210.c: remapped %dkB card memory to virtual address %p\n",
- NE3210_STOP_PG/4, ei_status.mem);
- dev->mem_start = (unsigned long)ei_status.mem;
- dev->mem_end = dev->mem_start + (NE3210_STOP_PG - NE3210_START_PG)*256;
-
- /* The 8390 offset is zero for the NE3210 */
- dev->base_addr = ioaddr;
-
- ei_status.name = "NE3210";
- ei_status.tx_start_page = NE3210_START_PG;
- ei_status.rx_start_page = NE3210_START_PG + TX_PAGES;
- ei_status.stop_page = NE3210_STOP_PG;
- ei_status.word16 = 1;
- ei_status.priv = phys_mem;
-
- if (ei_debug > 0)
- printk("ne3210 loaded.\n");
-
- ei_status.reset_8390 = &ne3210_reset_8390;
- ei_status.block_input = &ne3210_block_input;
- ei_status.block_output = &ne3210_block_output;
- ei_status.get_8390_hdr = &ne3210_get_8390_hdr;
-
- dev->netdev_ops = &ei_netdev_ops;
-
- dev->if_port = ifmap_val[port_index];
-
- if ((retval = register_netdev (dev)))
- goto out5;
-
- NS8390_init(dev, 0);
- return 0;
-
- out5:
- iounmap(ei_status.mem);
- out4:
- release_mem_region (phys_mem, NE3210_STOP_PG*0x100);
- out3:
- free_irq (dev->irq, dev);
- out2:
- release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
- out1:
- release_region (ioaddr, NE3210_IO_EXTENT);
- out:
- free_netdev (dev);
-
- return retval;
-}
-
-static int ne3210_eisa_remove(struct device *device)
-{
- struct net_device *dev = dev_get_drvdata(device);
- unsigned long ioaddr = to_eisa_device (device)->base_addr;
-
- unregister_netdev (dev);
- iounmap(ei_status.mem);
- release_mem_region (ei_status.priv, NE3210_STOP_PG*0x100);
- free_irq (dev->irq, dev);
- release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
- release_region (ioaddr, NE3210_IO_EXTENT);
- free_netdev (dev);
-
- return 0;
-}
-
-/*
- * Reset by toggling the "Board Enable" bits (bit 2 and 0).
- */
-
-static void ne3210_reset_8390(struct net_device *dev)
-{
- unsigned short ioaddr = dev->base_addr;
-
- outb(0x04, ioaddr + NE3210_RESET_PORT);
- if (ei_debug > 1) printk("%s: resetting the NE3210...", dev->name);
-
- mdelay(2);
-
- ei_status.txing = 0;
- outb(0x01, ioaddr + NE3210_RESET_PORT);
- if (ei_debug > 1) printk("reset done\n");
-}
-
-/*
- * Note: In the following three functions is the implicit assumption
- * that the associated memcpy will only use "rep; movsl" as long as
- * we keep the counts as some multiple of doublewords. This is a
- * requirement of the hardware, and also prevents us from using
- * eth_io_copy_and_sum() since we can't guarantee it will limit
- * itself to doubleword access.
- */
-
-/*
- * Grab the 8390 specific header. Similar to the block_input routine, but
- * we don't need to be concerned with ring wrap as the header will be at
- * the start of a page, so we optimize accordingly. (A single doubleword.)
- */
-
-static void
-ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
- void __iomem *hdr_start = ei_status.mem + ((ring_page - NE3210_START_PG)<<8);
- memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
- hdr->count = (hdr->count + 3) & ~3; /* Round up allocation. */
-}
-
-/*
- * Block input and output are easy on shared memory ethercards, the only
- * complication is when the ring buffer wraps. The count will already
- * be rounded up to a doubleword value via ne3210_get_8390_hdr() above.
- */
-
-static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb,
- int ring_offset)
-{
- void __iomem *start = ei_status.mem + ring_offset - NE3210_START_PG*256;
-
- if (ring_offset + count > NE3210_STOP_PG*256) {
- /* Packet wraps over end of ring buffer. */
- int semi_count = NE3210_STOP_PG*256 - ring_offset;
- memcpy_fromio(skb->data, start, semi_count);
- count -= semi_count;
- memcpy_fromio(skb->data + semi_count,
- ei_status.mem + TX_PAGES*256, count);
- } else {
- /* Packet is in one chunk. */
- memcpy_fromio(skb->data, start, count);
- }
-}
-
-static void ne3210_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- void __iomem *shmem = ei_status.mem + ((start_page - NE3210_START_PG)<<8);
-
- count = (count + 3) & ~3; /* Round up to doubleword */
- memcpy_toio(shmem, buf, count);
-}
-
-static struct eisa_device_id ne3210_ids[] = {
- { "EGL0101" },
- { "NVL1801" },
- { "" },
-};
-MODULE_DEVICE_TABLE(eisa, ne3210_ids);
-
-static struct eisa_driver ne3210_eisa_driver = {
- .id_table = ne3210_ids,
- .driver = {
- .name = "ne3210",
- .probe = ne3210_eisa_probe,
- .remove = ne3210_eisa_remove,
- },
-};
-
-MODULE_DESCRIPTION("NE3210 EISA Ethernet driver");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(eisa, ne3210_ids);
-
-static int ne3210_init(void)
-{
- return eisa_driver_register (&ne3210_eisa_driver);
-}
-
-static void ne3210_cleanup(void)
-{
- eisa_driver_unregister (&ne3210_eisa_driver);
-}
-
-module_init (ne3210_init);
-module_exit (ne3210_cleanup);
OpenPOWER on IntegriCloud