diff options
Diffstat (limited to 'drivers/net/ethernet/3com/3c59x.c')
| -rw-r--r-- | drivers/net/ethernet/3com/3c59x.c | 3326 |
1 files changed, 3326 insertions, 0 deletions
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c new file mode 100644 index 000000000000..8cc22568ebd3 --- /dev/null +++ b/drivers/net/ethernet/3com/3c59x.c @@ -0,0 +1,3326 @@ +/* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */ +/* + Written 1996-1999 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + This driver is for the 3Com "Vortex" and "Boomerang" series ethercards. + Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597 + and the EtherLink XL 3c900 and 3c905 cards. + + Problem reports and questions should be directed to + vortex@scyld.com + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + +*/ + +/* + * FIXME: This driver _could_ support MTU changing, but doesn't. See Don's hamachi.c implementation + * as well as other drivers + * + * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k + * due to dead code elimination. There will be some performance benefits from this due to + * elimination of all the tests and reduced cache footprint. + */ + + +#define DRV_NAME "3c59x" + + + +/* A few values that may be tweaked. */ +/* Keep the ring sizes a power of two for efficiency. */ +#define TX_RING_SIZE 16 +#define RX_RING_SIZE 32 +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +/* "Knobs" that adjust features and parameters. */ +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1512 effectively disables this feature. */ +#ifndef __arm__ +static int rx_copybreak = 200; +#else +/* ARM systems perform better by disregarding the bus-master + transfer capability of these cards. -- rmk */ +static int rx_copybreak = 1513; +#endif +/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ +static const int mtu = 1500; +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 32; +/* Tx timeout interval (millisecs) */ +static int watchdog = 5000; + +/* Allow aggregation of Tx interrupts. Saves CPU load at the cost + * of possible Tx stalls if the system is blocking interrupts + * somewhere else. Undefine this to disable. + */ +#define tx_interrupt_mitigation 1 + +/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */ +#define vortex_debug debug +#ifdef VORTEX_DEBUG +static int vortex_debug = VORTEX_DEBUG; +#else +static int vortex_debug = 1; +#endif + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/in.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/mii.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/highmem.h> +#include <linux/eisa.h> +#include <linux/bitops.h> +#include <linux/jiffies.h> +#include <linux/gfp.h> +#include <asm/irq.h> /* For nr_irqs only. */ +#include <asm/io.h> +#include <asm/uaccess.h> + +/* Kernel compatibility defines, some common to David Hinds' PCMCIA package. + This is only in the support-all-kernels source code. */ + +#define RUN_AT(x) (jiffies + (x)) + +#include <linux/delay.h> + + +static const char version[] __devinitconst = + DRV_NAME ": Donald Becker and others.\n"; + +MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); +MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver "); +MODULE_LICENSE("GPL"); + + +/* Operational parameter that usually are not changed. */ + +/* The Vortex size is twice that of the original EtherLinkIII series: the + runtime register window, window 1, is now always mapped in. + The Boomerang size is twice as large as the Vortex -- it has additional + bus master control registers. */ +#define VORTEX_TOTAL_SIZE 0x20 +#define BOOMERANG_TOTAL_SIZE 0x40 + +/* Set iff a MII transceiver on any interface requires mdio preamble. + This only set with the original DP83840 on older 3c905 boards, so the extra + code size of a per-interface flag is not worthwhile. */ +static char mii_preamble_required; + +#define PFX DRV_NAME ": " + + + +/* + Theory of Operation + +I. Board Compatibility + +This device driver is designed for the 3Com FastEtherLink and FastEtherLink +XL, 3Com's PCI to 10/100baseT adapters. It also works with the 10Mbs +versions of the FastEtherLink cards. The supported product IDs are + 3c590, 3c592, 3c595, 3c597, 3c900, 3c905 + +The related ISA 3c515 is supported with a separate driver, 3c515.c, included +with the kernel source or available from + cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html + +II. Board-specific settings + +PCI bus devices are configured by the system at boot time, so no jumpers +need to be set on the board. The system BIOS should be set to assign the +PCI INTA signal to an otherwise unused system IRQ line. + +The EEPROM settings for media type and forced-full-duplex are observed. +The EEPROM media type should be left at the default "autoselect" unless using +10base2 or AUI connections which cannot be reliably detected. + +III. Driver operation + +The 3c59x series use an interface that's very similar to the previous 3c5x9 +series. The primary interface is two programmed-I/O FIFOs, with an +alternate single-contiguous-region bus-master transfer (see next). + +The 3c900 "Boomerang" series uses a full-bus-master interface with separate +lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, +DEC Tulip and Intel Speedo3. The first chip version retains a compatible +programmed-I/O interface that has been removed in 'B' and subsequent board +revisions. + +One extension that is advertised in a very large font is that the adapters +are capable of being bus masters. On the Vortex chip this capability was +only for a single contiguous region making it far less useful than the full +bus master capability. There is a significant performance impact of taking +an extra interrupt or polling for the completion of each transfer, as well +as difficulty sharing the single transfer engine between the transmit and +receive threads. Using DMA transfers is a win only with large blocks or +with the flawed versions of the Intel Orion motherboard PCI controller. + +The Boomerang chip's full-bus-master interface is useful, and has the +currently-unused advantages over other similar chips that queued transmit +packets may be reordered and receive buffer groups are associated with a +single frame. + +With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme. +Rather than a fixed intermediate receive buffer, this scheme allocates +full-sized skbuffs as receive buffers. The value RX_COPYBREAK is used as +the copying breakpoint: it is chosen to trade-off the memory wasted by +passing the full-sized skbuff to the queue layer for all frames vs. the +copying cost of copying a frame to a correctly-sized skbuff. + +IIIC. Synchronization +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +dev->tbusy flag. The other thread is the interrupt handler, which is single +threaded by the hardware and other software. + +IV. Notes + +Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development +3c590, 3c595, and 3c900 boards. +The name "Vortex" is the internal 3Com project name for the PCI ASIC, and +the EISA version is called "Demon". According to Terry these names come +from rides at the local amusement park. + +The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes! +This driver only supports ethernet packets because of the skbuff allocation +limit of 4K. +*/ + +/* This table drives the PCI probe routines. It's mostly boilerplate in all + of the drivers, and will likely be provided by some future kernel. +*/ +enum pci_flags_bit { + PCI_USES_MASTER=4, +}; + +enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8, + EEPROM_8BIT=0x10, /* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */ + HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100, + INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800, + EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000, + EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, }; + +enum vortex_chips { + CH_3C590 = 0, + CH_3C592, + CH_3C597, + CH_3C595_1, + CH_3C595_2, + + CH_3C595_3, + CH_3C900_1, + CH_3C900_2, + CH_3C900_3, + CH_3C900_4, + + CH_3C900_5, + CH_3C900B_FL, + CH_3C905_1, + CH_3C905_2, + CH_3C905B_TX, + CH_3C905B_1, + + CH_3C905B_2, + CH_3C905B_FX, + CH_3C905C, + CH_3C9202, + CH_3C980, + CH_3C9805, + + CH_3CSOHO100_TX, + CH_3C555, + CH_3C556, + CH_3C556B, + CH_3C575, + + CH_3C575_1, + CH_3CCFE575, + CH_3CCFE575CT, + CH_3CCFE656, + CH_3CCFEM656, + + CH_3CCFEM656_1, + CH_3C450, + CH_3C920, + CH_3C982A, + CH_3C982B, + + CH_905BT4, + CH_920B_EMB_WNM, +}; + + +/* note: this array directly indexed by above enums, and MUST + * be kept in sync with both the enums above, and the PCI device + * table below + */ +static struct vortex_chip_info { + const char *name; + int flags; + int drv_flags; + int io_size; +} vortex_info_tbl[] __devinitdata = { + {"3c590 Vortex 10Mbps", + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */ + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c595 Vortex 100baseTx", + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c595 Vortex 100baseT4", + PCI_USES_MASTER, IS_VORTEX, 32, }, + + {"3c595 Vortex 100base-MII", + PCI_USES_MASTER, IS_VORTEX, 32, }, + {"3c900 Boomerang 10baseT", + PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, + {"3c900 Boomerang 10Mbps Combo", + PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, }, + {"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */ + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c900 Cyclone 10Mbps Combo", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + + {"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */ + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c900B-FL Cyclone 10base-FL", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c905 Boomerang 100baseTx", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + {"3c905 Boomerang 100baseT4", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + {"3C905B-TX Fast Etherlink XL PCI", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c905B Cyclone 100baseTx", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + + {"3c905B Cyclone 10/100/BNC", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3c905B-FX Cyclone 100baseFx", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, }, + {"3c905C Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c920B-EMB-WNM (ATI Radeon 9100 IGP)", + PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, }, + {"3c980 Cyclone", + PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + + {"3c980C Python-T", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3cSOHO100-TX Hurricane", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c555 Laptop Hurricane", + PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, }, + {"3c556 Laptop Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR| + HAS_HWCKSM, 128, }, + {"3c556B Laptop Hurricane", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR| + WNO_XCVR_PWR|HAS_HWCKSM, 128, }, + + {"3c575 [Megahertz] 10/100 LAN CardBus", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, + {"3c575 Boomerang CardBus", + PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, }, + {"3CCFE575BT Cyclone CardBus", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT| + INVERT_LED_PWR|HAS_HWCKSM, 128, }, + {"3CCFE575CT Tornado CardBus", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, + {"3CCFE656 Cyclone CardBus", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + INVERT_LED_PWR|HAS_HWCKSM, 128, }, + + {"3CCFEM656B Cyclone+Winmodem CardBus", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + INVERT_LED_PWR|HAS_HWCKSM, 128, }, + {"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */ + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR| + MAX_COLLISION_RESET|HAS_HWCKSM, 128, }, + {"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */ + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3c920 Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + {"3c982 Hydra Dual Port A", + PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, + + {"3c982 Hydra Dual Port B", + PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, }, + {"3c905B-T4", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, + {"3c920B-EMB-WNM Tornado", + PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, }, + + {NULL,}, /* NULL terminated list. */ +}; + + +static DEFINE_PCI_DEVICE_TABLE(vortex_pci_tbl) = { + { 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 }, + { 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 }, + { 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 }, + { 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 }, + { 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 }, + + { 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 }, + { 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 }, + { 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 }, + { 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 }, + { 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 }, + + { 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 }, + { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL }, + { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 }, + { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 }, + { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX }, + { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 }, + + { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 }, + { 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX }, + { 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C }, + { 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 }, + { 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 }, + { 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 }, + + { 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX }, + { 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 }, + { 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 }, + { 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B }, + { 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 }, + + { 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 }, + { 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 }, + { 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT }, + { 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 }, + { 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 }, + + { 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 }, + { 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 }, + { 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 }, + { 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A }, + { 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B }, + + { 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 }, + { 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM }, + + {0,} /* 0 terminated list. */ +}; +MODULE_DEVICE_TABLE(pci, vortex_pci_tbl); + + +/* Operational definitions. + These are not used by other compilation units and thus are not + exported in a ".h" file. + + First the windows. There are eight register windows, with the command + and status registers available in each. + */ +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. + Note that 11 parameters bits was fine for ethernet, but the new chip + can handle FDDI length frames (~4500 octets) and now parameters count + 32-bit 'Dwords' rather than octets. */ + +enum vortex_cmd { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, + UpStall = 6<<11, UpUnstall = (6<<11)+1, + DownStall = (6<<11)+2, DownUnstall = (6<<11)+3, + RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, + StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; + +/* Bits in the general status register. */ +enum vortex_status { + IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, + DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10, + DMAInProgress = 1<<11, /* DMA controller is still busy.*/ + CmdInProgress = 1<<12, /* EL3_CMD is still busy.*/ +}; + +/* Register window 1 offsets, the window used in normal operation. + On the Vortex this window is always mapped at offsets 0x10-0x1f. */ +enum Window1 { + TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, + RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B, + TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ +}; +enum Window0 { + Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ + Wn0EepromData = 12, /* Window 0: EEPROM results register. */ + IntrStatus=0x0E, /* Valid in all windows. */ +}; +enum Win0_EEPROM_bits { + EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, + EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ + EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ +}; +/* EEPROM locations. */ +enum eeprom_offset { + PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3, + EtherLink3ID=7, IFXcvrIO=8, IRQLine=9, + NodeAddr01=10, NodeAddr23=11, NodeAddr45=12, + DriverTune=13, Checksum=15}; + +enum Window2 { /* Window 2. */ + Wn2_ResetOptions=12, +}; +enum Window3 { /* Window 3: MAC/config bits. */ + Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8, +}; + +#define BFEXT(value, offset, bitcount) \ + ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1)) + +#define BFINS(lhs, rhs, offset, bitcount) \ + (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \ + (((rhs) & ((1 << (bitcount)) - 1)) << (offset))) + +#define RAM_SIZE(v) BFEXT(v, 0, 3) +#define RAM_WIDTH(v) BFEXT(v, 3, 1) +#define RAM_SPEED(v) BFEXT(v, 4, 2) +#define ROM_SIZE(v) BFEXT(v, 6, 2) +#define RAM_SPLIT(v) BFEXT(v, 16, 2) +#define XCVR(v) BFEXT(v, 20, 4) +#define AUTOSELECT(v) BFEXT(v, 24, 1) + +enum Window4 { /* Window 4: Xcvr/media bits. */ + Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10, +}; +enum Win4_Media_bits { + Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ + Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ + Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ + Media_LnkBeat = 0x0800, +}; +enum Window7 { /* Window 7: Bus Master control. */ + Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6, + Wn7_MasterStatus = 12, +}; +/* Boomerang bus master control registers. */ +enum MasterCtrl { + PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c, + TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38, +}; + +/* The Rx and Tx descriptor lists. + Caution Alpha hackers: these types are 32 bits! Note also the 8 byte + alignment contraint on tx_ring[] and rx_ring[]. */ +#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */ +#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */ +struct boom_rx_desc { + __le32 next; /* Last entry points to 0. */ + __le32 status; + __le32 addr; /* Up to 63 addr/len pairs possible. */ + __le32 length; /* Set LAST_FRAG to indicate last pair. */ +}; +/* Values for the Rx status entry. */ +enum rx_desc_status { + RxDComplete=0x00008000, RxDError=0x4000, + /* See boomerang_rx() for actual error bits */ + IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27, + IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31, +}; + +#ifdef MAX_SKB_FRAGS +#define DO_ZEROCOPY 1 +#else +#define DO_ZEROCOPY 0 +#endif + +struct boom_tx_desc { + __le32 next; /* Last entry points to 0. */ + __le32 status; /* bits 0:12 length, others see below. */ +#if DO_ZEROCOPY + struct { + __le32 addr; + __le32 length; + } frag[1+MAX_SKB_FRAGS]; +#else + __le32 addr; + __le32 length; +#endif +}; + +/* Values for the Tx status entry. */ +enum tx_desc_status { + CRCDisable=0x2000, TxDComplete=0x8000, + AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000, + TxIntrUploaded=0x80000000, /* IRQ when in FIFO, but maybe not sent. */ +}; + +/* Chip features we care about in vp->capabilities, read from the EEPROM. */ +enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 }; + +struct vortex_extra_stats { + unsigned long tx_deferred; + unsigned long tx_max_collisions; + unsigned long tx_multiple_collisions; + unsigned long tx_single_collisions; + unsigned long rx_bad_ssd; +}; + +struct vortex_private { + /* The Rx and Tx rings should be quad-word-aligned. */ + struct boom_rx_desc* rx_ring; + struct boom_tx_desc* tx_ring; + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + /* The addresses of transmit- and receive-in-place skbuffs. */ + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + unsigned int cur_rx, cur_tx; /* The next free ring entry */ + unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */ + struct vortex_extra_stats xstats; /* NIC-specific extra stats */ + struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ + dma_addr_t tx_skb_dma; /* Allocated DMA address for bus master ctrl DMA. */ + + /* PCI configuration space information. */ + struct device *gendev; + void __iomem *ioaddr; /* IO address space */ + void __iomem *cb_fn_base; /* CardBus function status addr space. */ + + /* Some values here only for performance evaluation and path-coverage */ + int rx_nocopy, rx_copy, queued_packet, rx_csumhits; + int card_idx; + + /* The remainder are related to chip state, mostly media selection. */ + struct timer_list timer; /* Media selection timer. */ + struct timer_list rx_oom_timer; /* Rx skb allocation retry timer */ + int options; /* User-settable misc. driver options. */ + unsigned int media_override:4, /* Passed-in media type. */ + default_media:4, /* Read from the EEPROM/Wn3_Config. */ + full_duplex:1, autoselect:1, + bus_master:1, /* Vortex can only do a fragment bus-m. */ + full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */ + flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */ + partner_flow_ctrl:1, /* Partner supports flow control */ + has_nway:1, + enable_wol:1, /* Wake-on-LAN is enabled */ + pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */ + open:1, + medialock:1, + must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ + large_frames:1, /* accept large frames */ + handling_irq:1; /* private in_irq indicator */ + /* {get|set}_wol operations are already serialized by rtnl. + * no additional locking is required for the enable_wol and acpi_set_WOL() + */ + int drv_flags; + u16 status_enable; + u16 intr_enable; + u16 available_media; /* From Wn3_Options. */ + u16 capabilities, info1, info2; /* Various, from EEPROM. */ + u16 advertising; /* NWay media advertisement */ + unsigned char phys[2]; /* MII device addresses. */ + u16 deferred; /* Resend these interrupts when we + * bale from the ISR */ + u16 io_size; /* Size of PCI region (for release_region) */ + + /* Serialises access to hardware other than MII and variables below. + * The lock hierarchy is rtnl_lock > {lock, mii_lock} > window_lock. */ + spinlock_t lock; + + spinlock_t mii_lock; /* Serialises access to MII */ + struct mii_if_info mii; /* MII lib hooks/info */ + spinlock_t window_lock; /* Serialises access to windowed regs */ + int window; /* Register window */ +}; + +static void window_set(struct vortex_private *vp, int window) +{ + if (window != vp->window) { + iowrite16(SelectWindow + window, vp->ioaddr + EL3_CMD); + vp->window = window; + } +} + +#define DEFINE_WINDOW_IO(size) \ +static u ## size \ +window_read ## size(struct vortex_private *vp, int window, int addr) \ +{ \ + unsigned long flags; \ + u ## size ret; \ + spin_lock_irqsave(&vp->window_lock, flags); \ + window_set(vp, window); \ + ret = ioread ## size(vp->ioaddr + addr); \ + spin_unlock_irqrestore(&vp->window_lock, flags); \ + return ret; \ +} \ +static void \ +window_write ## size(struct vortex_private *vp, u ## size value, \ + int window, int addr) \ +{ \ + unsigned long flags; \ + spin_lock_irqsave(&vp->window_lock, flags); \ + window_set(vp, window); \ + iowrite ## size(value, vp->ioaddr + addr); \ + spin_unlock_irqrestore(&vp->window_lock, flags); \ +} +DEFINE_WINDOW_IO(8) +DEFINE_WINDOW_IO(16) +DEFINE_WINDOW_IO(32) + +#ifdef CONFIG_PCI +#define DEVICE_PCI(dev) (((dev)->bus == &pci_bus_type) ? to_pci_dev((dev)) : NULL) +#else +#define DEVICE_PCI(dev) NULL +#endif + +#define VORTEX_PCI(vp) \ + ((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL)) + +#ifdef CONFIG_EISA +#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL) +#else +#define DEVICE_EISA(dev) NULL +#endif + +#define VORTEX_EISA(vp) \ + ((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL)) + +/* The action to take with a media selection timer tick. + Note that we deviate from the 3Com order by checking 10base2 before AUI. + */ +enum xcvr_types { + XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, + XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10, +}; + +static const struct media_table { + char *name; + unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ + mask:8, /* The transceiver-present bit in Wn3_Config.*/ + next:8; /* The media type to try next. */ + int wait; /* Time before we check media status. */ +} media_tbl[] = { + { "10baseT", Media_10TP,0x08, XCVR_10base2, (14*HZ)/10}, + { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10}, + { "undefined", 0, 0x80, XCVR_10baseT, 10000}, + { "10base2", 0, 0x10, XCVR_AUI, (1*HZ)/10}, + { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10}, + { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14*HZ)/10}, + { "MII", 0, 0x41, XCVR_10baseT, 3*HZ }, + { "undefined", 0, 0x01, XCVR_10baseT, 10000}, + { "Autonegotiate", 0, 0x41, XCVR_10baseT, 3*HZ}, + { "MII-External", 0, 0x41, XCVR_10baseT, 3*HZ }, + { "Default", 0, 0xFF, XCVR_10baseT, 10000}, +}; + +static struct { + const char str[ETH_GSTRING_LEN]; +} ethtool_stats_keys[] = { + { "tx_deferred" }, + { "tx_max_collisions" }, + { "tx_multiple_collisions" }, + { "tx_single_collisions" }, + { "rx_bad_ssd" }, +}; + +/* number of ETHTOOL_GSTATS u64's */ +#define VORTEX_NUM_STATS 5 + +static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, + int chip_idx, int card_idx); +static int vortex_up(struct net_device *dev); +static void vortex_down(struct net_device *dev, int final); +static int vortex_open(struct net_device *dev); +static void mdio_sync(struct vortex_private *vp, int bits); +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *vp, int phy_id, int location, int value); +static void vortex_timer(unsigned long arg); +static void rx_oom_timer(unsigned long arg); +static netdev_tx_t vortex_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static int vortex_rx(struct net_device *dev); +static int boomerang_rx(struct net_device *dev); +static irqreturn_t vortex_interrupt(int irq, void *dev_id); +static irqreturn_t boomerang_interrupt(int irq, void *dev_id); +static int vortex_close(struct net_device *dev); +static void dump_tx_ring(struct net_device *dev); +static void update_stats(void __iomem *ioaddr, struct net_device *dev); +static struct net_device_stats *vortex_get_stats(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +#ifdef CONFIG_PCI +static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +#endif +static void vortex_tx_timeout(struct net_device *dev); +static void acpi_set_WOL(struct net_device *dev); +static const struct ethtool_ops vortex_ethtool_ops; +static void set_8021q_mode(struct net_device *dev, int enable); + +/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ +/* Option count limit only -- unlimited interfaces are supported. */ +#define MAX_UNITS 8 +static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 }; +static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 }; +static int global_options = -1; +static int global_full_duplex = -1; +static int global_enable_wol = -1; +static int global_use_mmio = -1; + +/* Variables to work-around the Compaq PCI BIOS32 problem. */ +static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900; +static struct net_device *compaq_net_device; + +static int vortex_cards_found; + +module_param(debug, int, 0); +module_param(global_options, int, 0); +module_param_array(options, int, NULL, 0); +module_param(global_full_duplex, int, 0); +module_param_array(full_duplex, int, NULL, 0); +module_param_array(hw_checksums, int, NULL, 0); +module_param_array(flow_ctrl, int, NULL, 0); +module_param(global_enable_wol, int, 0); +module_param_array(enable_wol, int, NULL, 0); +module_param(rx_copybreak, int, 0); +module_param(max_interrupt_work, int, 0); +module_param(compaq_ioaddr, int, 0); +module_param(compaq_irq, int, 0); +module_param(compaq_device_id, int, 0); +module_param(watchdog, int, 0); +module_param(global_use_mmio, int, 0); +module_param_array(use_mmio, int, NULL, 0); +MODULE_PARM_DESC(debug, "3c59x debug level (0-6)"); +MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex"); +MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset"); +MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)"); +MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset"); +MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)"); +MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)"); +MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)"); +MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset"); +MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt"); +MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)"); +MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)"); +MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)"); +MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds"); +MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset"); +MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)"); + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void poll_vortex(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + unsigned long flags; + local_irq_save(flags); + (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev); + local_irq_restore(flags); +} +#endif + +#ifdef CONFIG_PM + +static int vortex_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + + if (!ndev || !netif_running(ndev)) + return 0; + + netif_device_detach(ndev); + vortex_down(ndev, 1); + + return 0; +} + +static int vortex_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *ndev = pci_get_drvdata(pdev); + int err; + + if (!ndev || !netif_running(ndev)) + return 0; + + err = vortex_up(ndev); + if (err) + return err; + + netif_device_attach(ndev); + + return 0; +} + +static const struct dev_pm_ops vortex_pm_ops = { + .suspend = vortex_suspend, + .resume = vortex_resume, + .freeze = vortex_suspend, + .thaw = vortex_resume, + .poweroff = vortex_suspend, + .restore = vortex_resume, +}; + +#define VORTEX_PM_OPS (&vortex_pm_ops) + +#else /* !CONFIG_PM */ + +#define VORTEX_PM_OPS NULL + +#endif /* !CONFIG_PM */ + +#ifdef CONFIG_EISA +static struct eisa_device_id vortex_eisa_ids[] = { + { "TCM5920", CH_3C592 }, + { "TCM5970", CH_3C597 }, + { "" } +}; +MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids); + +static int __init vortex_eisa_probe(struct device *device) +{ + void __iomem *ioaddr; + struct eisa_device *edev; + + edev = to_eisa_device(device); + + if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME)) + return -EBUSY; + + ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE); + + if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12, + edev->id.driver_data, vortex_cards_found)) { + release_region(edev->base_addr, VORTEX_TOTAL_SIZE); + return -ENODEV; + } + + vortex_cards_found++; + + return 0; +} + +static int __devexit vortex_eisa_remove(struct device *device) +{ + struct eisa_device *edev; + struct net_device *dev; + struct vortex_private *vp; + void __iomem *ioaddr; + + edev = to_eisa_device(device); + dev = eisa_get_drvdata(edev); + + if (!dev) { + pr_err("vortex_eisa_remove called for Compaq device!\n"); + BUG(); + } + + vp = netdev_priv(dev); + ioaddr = vp->ioaddr; + + unregister_netdev(dev); + iowrite16(TotalReset|0x14, ioaddr + EL3_CMD); + release_region(dev->base_addr, VORTEX_TOTAL_SIZE); + + free_netdev(dev); + return 0; +} + +static struct eisa_driver vortex_eisa_driver = { + .id_table = vortex_eisa_ids, + .driver = { + .name = "3c59x", + .probe = vortex_eisa_probe, + .remove = __devexit_p(vortex_eisa_remove) + } +}; + +#endif /* CONFIG_EISA */ + +/* returns count found (>= 0), or negative on error */ +static int __init vortex_eisa_init(void) +{ + int eisa_found = 0; + int orig_cards_found = vortex_cards_found; + +#ifdef CONFIG_EISA + int err; + + err = eisa_driver_register (&vortex_eisa_driver); + if (!err) { + /* + * Because of the way EISA bus is probed, we cannot assume + * any device have been found when we exit from + * eisa_driver_register (the bus root driver may not be + * initialized yet). So we blindly assume something was + * found, and let the sysfs magic happened... + */ + eisa_found = 1; + } +#endif + + /* Special code to work-around the Compaq PCI BIOS32 problem. */ + if (compaq_ioaddr) { + vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE), + compaq_irq, compaq_device_id, vortex_cards_found++); + } + + return vortex_cards_found - orig_cards_found + eisa_found; +} + +/* returns count (>= 0), or negative on error */ +static int __devinit vortex_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc, unit, pci_bar; + struct vortex_chip_info *vci; + void __iomem *ioaddr; + + /* wake up and enable device */ + rc = pci_enable_device(pdev); + if (rc < 0) + goto out; + + unit = vortex_cards_found; + + if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) { + /* Determine the default if the user didn't override us */ + vci = &vortex_info_tbl[ent->driver_data]; + pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0; + } else if (unit < MAX_UNITS && use_mmio[unit] >= 0) + pci_bar = use_mmio[unit] ? 1 : 0; + else + pci_bar = global_use_mmio ? 1 : 0; + + ioaddr = pci_iomap(pdev, pci_bar, 0); + if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */ + ioaddr = pci_iomap(pdev, 0, 0); + if (!ioaddr) { + pci_disable_device(pdev); + rc = -ENOMEM; + goto out; + } + + rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq, + ent->driver_data, unit); + if (rc < 0) { + pci_iounmap(pdev, ioaddr); + pci_disable_device(pdev); + goto out; + } + + vortex_cards_found++; + +out: + return rc; +} + +static const struct net_device_ops boomrang_netdev_ops = { + .ndo_open = vortex_open, + .ndo_stop = vortex_close, + .ndo_start_xmit = boomerang_start_xmit, + .ndo_tx_timeout = vortex_tx_timeout, + .ndo_get_stats = vortex_get_stats, +#ifdef CONFIG_PCI + .ndo_do_ioctl = vortex_ioctl, +#endif + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_vortex, +#endif +}; + +static const struct net_device_ops vortex_netdev_ops = { + .ndo_open = vortex_open, + .ndo_stop = vortex_close, + .ndo_start_xmit = vortex_start_xmit, + .ndo_tx_timeout = vortex_tx_timeout, + .ndo_get_stats = vortex_get_stats, +#ifdef CONFIG_PCI + .ndo_do_ioctl = vortex_ioctl, +#endif + .ndo_set_multicast_list = set_rx_mode, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = poll_vortex, +#endif +}; + +/* + * Start up the PCI/EISA device which is described by *gendev. + * Return 0 on success. + * + * NOTE: pdev can be NULL, for the case of a Compaq device + */ +static int __devinit vortex_probe1(struct device *gendev, + void __iomem *ioaddr, int irq, + int chip_idx, int card_idx) +{ + struct vortex_private *vp; + int option; + unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ + int i, step; + struct net_device *dev; + static int printed_version; + int retval, print_info; + struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx]; + const char *print_name = "3c59x"; + struct pci_dev *pdev = NULL; + struct eisa_device *edev = NULL; + + if (!printed_version) { + pr_info("%s", version); + printed_version = 1; + } + + if (gendev) { + if ((pdev = DEVICE_PCI(gendev))) { + print_name = pci_name(pdev); + } + + if ((edev = DEVICE_EISA(gendev))) { + print_name = dev_name(&edev->dev); + } + } + + dev = alloc_etherdev(sizeof(*vp)); + retval = -ENOMEM; + if (!dev) { + pr_err(PFX "unable to allocate etherdev, aborting\n"); + goto out; + } + SET_NETDEV_DEV(dev, gendev); + vp = netdev_priv(dev); + + option = global_options; + + /* The lower four bits are the media type. */ + if (dev->mem_start) { + /* + * The 'options' param is passed in as the third arg to the + * LILO 'ether=' argument for non-modular use + */ + option = dev->mem_start; + } + else if (card_idx < MAX_UNITS) { + if (options[card_idx] >= 0) + option = options[card_idx]; + } + + if (option > 0) { + if (option & 0x8000) + vortex_debug = 7; + if (option & 0x4000) + vortex_debug = 2; + if (option & 0x0400) + vp->enable_wol = 1; + } + + print_info = (vortex_debug > 1); + if (print_info) + pr_info("See Documentation/networking/vortex.txt\n"); + + pr_info("%s: 3Com %s %s at %p.\n", + print_name, + pdev ? "PCI" : "EISA", + vci->name, + ioaddr); + + dev->base_addr = (unsigned long)ioaddr; + dev->irq = irq; + dev->mtu = mtu; + vp->ioaddr = ioaddr; + vp->large_frames = mtu > 1500; + vp->drv_flags = vci->drv_flags; + vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0; + vp->io_size = vci->io_size; + vp->card_idx = card_idx; + vp->window = -1; + + /* module list only for Compaq device */ + if (gendev == NULL) { + compaq_net_device = dev; + } + + /* PCI-only startup logic */ + if (pdev) { + /* EISA resources already marked, so only PCI needs to do this here */ + /* Ignore return value, because Cardbus drivers already allocate for us */ + if (request_region(dev->base_addr, vci->io_size, print_name) != NULL) + vp->must_free_region = 1; + + /* enable bus-mastering if necessary */ + if (vci->flags & PCI_USES_MASTER) + pci_set_master(pdev); + + if (vci->drv_flags & IS_VORTEX) { + u8 pci_latency; + u8 new_latency = 248; + + /* Check the PCI latency value. On the 3c590 series the latency timer + must be set to the maximum value to avoid data corruption that occurs + when the timer expires during a transfer. This bug exists the Vortex + chip only. */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency); + if (pci_latency < new_latency) { + pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n", + print_name, pci_latency, new_latency); + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency); + } + } + } + + spin_lock_init(&vp->lock); + spin_lock_init(&vp->mii_lock); + spin_lock_init(&vp->window_lock); + vp->gendev = gendev; + vp->mii.dev = dev; + vp->mii.mdio_read = mdio_read; + vp->mii.mdio_write = mdio_write; + vp->mii.phy_id_mask = 0x1f; + vp->mii.reg_num_mask = 0x1f; + + /* Makes sure rings are at least 16 byte aligned. */ + vp->rx_ring = pci_alloc_consistent(pdev, sizeof(struct boom_rx_desc) * RX_RING_SIZE + + sizeof(struct boom_tx_desc) * TX_RING_SIZE, + &vp->rx_ring_dma); + retval = -ENOMEM; + if (!vp->rx_ring) + goto free_region; + + vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE); + vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE; + + /* if we are a PCI driver, we store info in pdev->driver_data + * instead of a module list */ + if (pdev) + pci_set_drvdata(pdev, dev); + if (edev) + eisa_set_drvdata(edev, dev); + + vp->media_override = 7; + if (option >= 0) { + vp->media_override = ((option & 7) == 2) ? 0 : option & 15; + if (vp->media_override != 7) + vp->medialock = 1; + vp->full_duplex = (option & 0x200) ? 1 : 0; + vp->bus_master = (option & 16) ? 1 : 0; + } + + if (global_full_duplex > 0) + vp->full_duplex = 1; + if (global_enable_wol > 0) + vp->enable_wol = 1; + + if (card_idx < MAX_UNITS) { + if (full_duplex[card_idx] > 0) + vp->full_duplex = 1; + if (flow_ctrl[card_idx] > 0) + vp->flow_ctrl = 1; + if (enable_wol[card_idx] > 0) + vp->enable_wol = 1; + } + + vp->mii.force_media = vp->full_duplex; + vp->options = option; + /* Read the station address from the EEPROM. */ + { + int base; + + if (vci->drv_flags & EEPROM_8BIT) + base = 0x230; + else if (vci->drv_flags & EEPROM_OFFSET) + base = EEPROM_Read + 0x30; + else + base = EEPROM_Read; + + for (i = 0; i < 0x40; i++) { + int timer; + window_write16(vp, base + i, 0, Wn0EepromCmd); + /* Pause for at least 162 us. for the read to take place. */ + for (timer = 10; timer >= 0; timer--) { + udelay(162); + if ((window_read16(vp, 0, Wn0EepromCmd) & + 0x8000) == 0) + break; + } + eeprom[i] = window_read16(vp, 0, Wn0EepromData); + } + } + for (i = 0; i < 0x18; i++) + checksum ^= eeprom[i]; + checksum = (checksum ^ (checksum >> 8)) & 0xff; + if (checksum != 0x00) { /* Grrr, needless incompatible change 3Com. */ + while (i < 0x21) + checksum ^= eeprom[i++]; + checksum = (checksum ^ (checksum >> 8)) & 0xff; + } + if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO)) + pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum); + for (i = 0; i < 3; i++) + ((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + if (print_info) + pr_cont(" %pM", dev->dev_addr); + /* Unfortunately an all zero eeprom passes the checksum and this + gets found in the wild in failure cases. Crypto is hard 8) */ + if (!is_valid_ether_addr(dev->dev_addr)) { + retval = -EINVAL; + pr_err("*** EEPROM MAC address is invalid.\n"); + goto free_ring; /* With every pack */ + } + for (i = 0; i < 6; i++) + window_write8(vp, dev->dev_addr[i], 2, i); + + if (print_info) + pr_cont(", IRQ %d\n", dev->irq); + /* Tell them about an invalid IRQ. */ + if (dev->irq <= 0 || dev->irq >= nr_irqs) + pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n", + dev->irq); + + step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1; + if (print_info) { + pr_info(" product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n", + eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14], + step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9); + } + + + if (pdev && vci->drv_flags & HAS_CB_FNS) { + unsigned short n; + + vp->cb_fn_base = pci_iomap(pdev, 2, 0); + if (!vp->cb_fn_base) { + retval = -ENOMEM; + goto free_ring; + } + + if (print_info) { + pr_info("%s: CardBus functions mapped %16.16llx->%p\n", + print_name, + (unsigned long long)pci_resource_start(pdev, 2), + vp->cb_fn_base); + } + + n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010; + if (vp->drv_flags & INVERT_LED_PWR) + n |= 0x10; + if (vp->drv_flags & INVERT_MII_PWR) + n |= 0x4000; + window_write16(vp, n, 2, Wn2_ResetOptions); + if (vp->drv_flags & WNO_XCVR_PWR) { + window_write16(vp, 0x0800, 0, 0); + } + } + + /* Extract our information from the EEPROM data. */ + vp->info1 = eeprom[13]; + vp->info2 = eeprom[15]; + vp->capabilities = eeprom[16]; + + if (vp->info1 & 0x8000) { + vp->full_duplex = 1; + if (print_info) + pr_info("Full duplex capable\n"); + } + + { + static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + unsigned int config; + vp->available_media = window_read16(vp, 3, Wn3_Options); + if ((vp->available_media & 0xff) == 0) /* Broken 3c916 */ + vp->available_media = 0x40; + config = window_read32(vp, 3, Wn3_Config); + if (print_info) { + pr_debug(" Internal config register is %4.4x, transceivers %#x.\n", + config, window_read16(vp, 3, Wn3_Options)); + pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n", + 8 << RAM_SIZE(config), + RAM_WIDTH(config) ? "word" : "byte", + ram_split[RAM_SPLIT(config)], + AUTOSELECT(config) ? "autoselect/" : "", + XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" : + media_tbl[XCVR(config)].name); + } + vp->default_media = XCVR(config); + if (vp->default_media == XCVR_NWAY) + vp->has_nway = 1; + vp->autoselect = AUTOSELECT(config); + } + + if (vp->media_override != 7) { + pr_info("%s: Media override to transceiver type %d (%s).\n", + print_name, vp->media_override, + media_tbl[vp->media_override].name); + dev->if_port = vp->media_override; + } else + dev->if_port = vp->default_media; + + if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) || + dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { + int phy, phy_idx = 0; + mii_preamble_required++; + if (vp->drv_flags & EXTRA_PREAMBLE) + mii_preamble_required++; + mdio_sync(vp, 32); + mdio_read(dev, 24, MII_BMSR); + for (phy = 0; phy < 32 && phy_idx < 1; phy++) { + int mii_status, phyx; + + /* + * For the 3c905CX we look at index 24 first, because it bogusly + * reports an external PHY at all indices + */ + if (phy == 0) + phyx = 24; + else if (phy <= 24) + phyx = phy - 1; + else + phyx = phy; + mii_status = mdio_read(dev, phyx, MII_BMSR); + if (mii_status && mii_status != 0xffff) { + vp->phys[phy_idx++] = phyx; + if (print_info) { + pr_info(" MII transceiver found at address %d, status %4x.\n", + phyx, mii_status); + } + if ((mii_status & 0x0040) == 0) + mii_preamble_required++; + } + } + mii_preamble_required--; + if (phy_idx == 0) { + pr_warning(" ***WARNING*** No MII transceivers found!\n"); + vp->phys[0] = 24; + } else { + vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE); + if (vp->full_duplex) { + /* Only advertise the FD media types. */ + vp->advertising &= ~0x02A0; + mdio_write(dev, vp->phys[0], 4, vp->advertising); + } + } + vp->mii.phy_id = vp->phys[0]; + } + + if (vp->capabilities & CapBusMaster) { + vp->full_bus_master_tx = 1; + if (print_info) { + pr_info(" Enabling bus-master transmits and %s receives.\n", + (vp->info2 & 1) ? "early" : "whole-frame" ); + } + vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2; + vp->bus_master = 0; /* AKPM: vortex only */ + } + + /* The 3c59x-specific entries in the device structure. */ + if (vp->full_bus_master_tx) { + dev->netdev_ops = &boomrang_netdev_ops; + /* Actually, it still should work with iommu. */ + if (card_idx < MAX_UNITS && + ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) || + hw_checksums[card_idx] == 1)) { + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + } + } else + dev->netdev_ops = &vortex_netdev_ops; + + if (print_info) { + pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n", + print_name, + (dev->features & NETIF_F_SG) ? "en":"dis", + (dev->features & NETIF_F_IP_CSUM) ? "en":"dis"); + } + + dev->ethtool_ops = &vortex_ethtool_ops; + dev->watchdog_timeo = (watchdog * HZ) / 1000; + + if (pdev) { + vp->pm_state_valid = 1; + pci_save_state(VORTEX_PCI(vp)); + acpi_set_WOL(dev); + } + retval = register_netdev(dev); + if (retval == 0) + return 0; + +free_ring: + pci_free_consistent(pdev, + sizeof(struct boom_rx_desc) * RX_RING_SIZE + + sizeof(struct boom_tx_desc) * TX_RING_SIZE, + vp->rx_ring, + vp->rx_ring_dma); +free_region: + if (vp->must_free_region) + release_region(dev->base_addr, vci->io_size); + free_netdev(dev); + pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval); +out: + return retval; +} + +static void +issue_and_wait(struct net_device *dev, int cmd) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int i; + + iowrite16(cmd, ioaddr + EL3_CMD); + for (i = 0; i < 2000; i++) { + if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) + return; + } + + /* OK, that didn't work. Do it the slow way. One second */ + for (i = 0; i < 100000; i++) { + if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) { + if (vortex_debug > 1) + pr_info("%s: command 0x%04x took %d usecs\n", + dev->name, cmd, i * 10); + return; + } + udelay(10); + } + pr_err("%s: command 0x%04x did not complete! Status=0x%x\n", + dev->name, cmd, ioread16(ioaddr + EL3_STATUS)); +} + +static void +vortex_set_duplex(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + + pr_info("%s: setting %s-duplex.\n", + dev->name, (vp->full_duplex) ? "full" : "half"); + + /* Set the full-duplex bit. */ + window_write16(vp, + ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) | + (vp->large_frames ? 0x40 : 0) | + ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ? + 0x100 : 0), + 3, Wn3_MAC_Ctrl); +} + +static void vortex_check_media(struct net_device *dev, unsigned int init) +{ + struct vortex_private *vp = netdev_priv(dev); + unsigned int ok_to_print = 0; + + if (vortex_debug > 3) + ok_to_print = 1; + + if (mii_check_media(&vp->mii, ok_to_print, init)) { + vp->full_duplex = vp->mii.full_duplex; + vortex_set_duplex(dev); + } else if (init) { + vortex_set_duplex(dev); + } +} + +static int +vortex_up(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + unsigned int config; + int i, mii_reg1, mii_reg5, err = 0; + + if (VORTEX_PCI(vp)) { + pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ + if (vp->pm_state_valid) + pci_restore_state(VORTEX_PCI(vp)); + err = pci_enable_device(VORTEX_PCI(vp)); + if (err) { + pr_warning("%s: Could not enable device\n", + dev->name); + goto err_out; + } + } + + /* Before initializing select the active media port. */ + config = window_read32(vp, 3, Wn3_Config); + + if (vp->media_override != 7) { + pr_info("%s: Media override to transceiver %d (%s).\n", + dev->name, vp->media_override, + media_tbl[vp->media_override].name); + dev->if_port = vp->media_override; + } else if (vp->autoselect) { + if (vp->has_nway) { + if (vortex_debug > 1) + pr_info("%s: using NWAY device table, not %d\n", + dev->name, dev->if_port); + dev->if_port = XCVR_NWAY; + } else { + /* Find first available media type, starting with 100baseTx. */ + dev->if_port = XCVR_100baseTx; + while (! (vp->available_media & media_tbl[dev->if_port].mask)) + dev->if_port = media_tbl[dev->if_port].next; + if (vortex_debug > 1) + pr_info("%s: first available media type: %s\n", + dev->name, media_tbl[dev->if_port].name); + } + } else { + dev->if_port = vp->default_media; + if (vortex_debug > 1) + pr_info("%s: using default media %s\n", + dev->name, media_tbl[dev->if_port].name); + } + + init_timer(&vp->timer); + vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait); + vp->timer.data = (unsigned long)dev; + vp->timer.function = vortex_timer; /* timer handler */ + add_timer(&vp->timer); + + init_timer(&vp->rx_oom_timer); + vp->rx_oom_timer.data = (unsigned long)dev; + vp->rx_oom_timer.function = rx_oom_timer; + + if (vortex_debug > 1) + pr_debug("%s: Initial media type %s.\n", + dev->name, media_tbl[dev->if_port].name); + + vp->full_duplex = vp->mii.force_media; + config = BFINS(config, dev->if_port, 20, 4); + if (vortex_debug > 6) + pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config); + window_write32(vp, config, 3, Wn3_Config); + + if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) { + mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR); + mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA); + vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0); + vp->mii.full_duplex = vp->full_duplex; + + vortex_check_media(dev, 1); + } + else + vortex_set_duplex(dev); + + issue_and_wait(dev, TxReset); + /* + * Don't reset the PHY - that upsets autonegotiation during DHCP operations. + */ + issue_and_wait(dev, RxReset|0x04); + + + iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + + if (vortex_debug > 1) { + pr_debug("%s: vortex_up() irq %d media status %4.4x.\n", + dev->name, dev->irq, window_read16(vp, 4, Wn4_Media)); + } + + /* Set the station address and mask in window 2 each time opened. */ + for (i = 0; i < 6; i++) + window_write8(vp, dev->dev_addr[i], 2, i); + for (; i < 12; i+=2) + window_write16(vp, 0, 2, i); + + if (vp->cb_fn_base) { + unsigned short n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010; + if (vp->drv_flags & INVERT_LED_PWR) + n |= 0x10; + if (vp->drv_flags & INVERT_MII_PWR) + n |= 0x4000; + window_write16(vp, n, 2, Wn2_ResetOptions); + } + + if (dev->if_port == XCVR_10base2) + /* Start the thinnet transceiver. We should really wait 50ms...*/ + iowrite16(StartCoax, ioaddr + EL3_CMD); + if (dev->if_port != XCVR_NWAY) { + window_write16(vp, + (window_read16(vp, 4, Wn4_Media) & + ~(Media_10TP|Media_SQE)) | + media_tbl[dev->if_port].media_bits, + 4, Wn4_Media); + } + + /* Switch to the stats window, and clear all stats by reading. */ + iowrite16(StatsDisable, ioaddr + EL3_CMD); + for (i = 0; i < 10; i++) + window_read8(vp, 6, i); + window_read16(vp, 6, 10); + window_read16(vp, 6, 12); + /* New: On the Vortex we must also clear the BadSSD counter. */ + window_read8(vp, 4, 12); + /* ..and on the Boomerang we enable the extra statistics bits. */ + window_write16(vp, 0x0040, 4, Wn4_NetDiag); + + if (vp->full_bus_master_rx) { /* Boomerang bus master. */ + vp->cur_rx = vp->dirty_rx = 0; + /* Initialize the RxEarly register as recommended. */ + iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD); + iowrite32(0x0020, ioaddr + PktStatus); + iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr); + } + if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ + vp->cur_tx = vp->dirty_tx = 0; + if (vp->drv_flags & IS_BOOMERANG) + iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */ + /* Clear the Rx, Tx rings. */ + for (i = 0; i < RX_RING_SIZE; i++) /* AKPM: this is done in vortex_open, too */ + vp->rx_ring[i].status = 0; + for (i = 0; i < TX_RING_SIZE; i++) + vp->tx_skbuff[i] = NULL; + iowrite32(0, ioaddr + DownListPtr); + } + /* Set receiver mode: presumably accept b-case and phys addr only. */ + set_rx_mode(dev); + /* enable 802.1q tagged frames */ + set_8021q_mode(dev, 1); + iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + + iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete| + (vp->full_bus_master_tx ? DownComplete : TxAvailable) | + (vp->full_bus_master_rx ? UpComplete : RxComplete) | + (vp->bus_master ? DMADone : 0); + vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable | + (vp->full_bus_master_rx ? 0 : RxComplete) | + StatsFull | HostError | TxComplete | IntReq + | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete; + iowrite16(vp->status_enable, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + iowrite16(vp->intr_enable, ioaddr + EL3_CMD); + if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ + iowrite32(0x8000, vp->cb_fn_base + 4); + netif_start_queue (dev); +err_out: + return err; +} + +static int +vortex_open(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + int i; + int retval; + + /* Use the now-standard shared IRQ implementation. */ + if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ? + boomerang_interrupt : vortex_interrupt, IRQF_SHARED, dev->name, dev))) { + pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq); + goto err; + } + + if (vp->full_bus_master_rx) { /* Boomerang bus master. */ + if (vortex_debug > 2) + pr_debug("%s: Filling in the Rx ring.\n", dev->name); + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb; + vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); + vp->rx_ring[i].status = 0; /* Clear complete bit. */ + vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); + + skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN, + GFP_KERNEL); + vp->rx_skbuff[i] = skb; + if (skb == NULL) + break; /* Bad news! */ + + skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */ + vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); + } + if (i != RX_RING_SIZE) { + int j; + pr_emerg("%s: no memory for rx ring\n", dev->name); + for (j = 0; j < i; j++) { + if (vp->rx_skbuff[j]) { + dev_kfree_skb(vp->rx_skbuff[j]); + vp->rx_skbuff[j] = NULL; + } + } + retval = -ENOMEM; + goto err_free_irq; + } + /* Wrap the ring. */ + vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma); + } + + retval = vortex_up(dev); + if (!retval) + goto out; + +err_free_irq: + free_irq(dev->irq, dev); +err: + if (vortex_debug > 1) + pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval); +out: + return retval; +} + +static void +vortex_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int next_tick = 60*HZ; + int ok = 0; + int media_status; + + if (vortex_debug > 2) { + pr_debug("%s: Media selection timer tick happened, %s.\n", + dev->name, media_tbl[dev->if_port].name); + pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo); + } + + media_status = window_read16(vp, 4, Wn4_Media); + switch (dev->if_port) { + case XCVR_10baseT: case XCVR_100baseTx: case XCVR_100baseFx: + if (media_status & Media_LnkBeat) { + netif_carrier_on(dev); + ok = 1; + if (vortex_debug > 1) + pr_debug("%s: Media %s has link beat, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); + } else { + netif_carrier_off(dev); + if (vortex_debug > 1) { + pr_debug("%s: Media %s has no link beat, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); + } + } + break; + case XCVR_MII: case XCVR_NWAY: + { + ok = 1; + vortex_check_media(dev, 0); + } + break; + default: /* Other media types handled by Tx timeouts. */ + if (vortex_debug > 1) + pr_debug("%s: Media %s has no indication, %x.\n", + dev->name, media_tbl[dev->if_port].name, media_status); + ok = 1; + } + + if (!netif_carrier_ok(dev)) + next_tick = 5*HZ; + + if (vp->medialock) + goto leave_media_alone; + + if (!ok) { + unsigned int config; + + spin_lock_irq(&vp->lock); + + do { + dev->if_port = media_tbl[dev->if_port].next; + } while ( ! (vp->available_media & media_tbl[dev->if_port].mask)); + if (dev->if_port == XCVR_Default) { /* Go back to default. */ + dev->if_port = vp->default_media; + if (vortex_debug > 1) + pr_debug("%s: Media selection failing, using default %s port.\n", + dev->name, media_tbl[dev->if_port].name); + } else { + if (vortex_debug > 1) + pr_debug("%s: Media selection failed, now trying %s port.\n", + dev->name, media_tbl[dev->if_port].name); + next_tick = media_tbl[dev->if_port].wait; + } + window_write16(vp, + (media_status & ~(Media_10TP|Media_SQE)) | + media_tbl[dev->if_port].media_bits, + 4, Wn4_Media); + + config = window_read32(vp, 3, Wn3_Config); + config = BFINS(config, dev->if_port, 20, 4); + window_write32(vp, config, 3, Wn3_Config); + + iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax, + ioaddr + EL3_CMD); + if (vortex_debug > 1) + pr_debug("wrote 0x%08x to Wn3_Config\n", config); + /* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */ + + spin_unlock_irq(&vp->lock); + } + +leave_media_alone: + if (vortex_debug > 2) + pr_debug("%s: Media selection timer finished, %s.\n", + dev->name, media_tbl[dev->if_port].name); + + mod_timer(&vp->timer, RUN_AT(next_tick)); + if (vp->deferred) + iowrite16(FakeIntr, ioaddr + EL3_CMD); +} + +static void vortex_tx_timeout(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n", + dev->name, ioread8(ioaddr + TxStatus), + ioread16(ioaddr + EL3_STATUS)); + pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n", + window_read16(vp, 4, Wn4_NetDiag), + window_read16(vp, 4, Wn4_Media), + ioread32(ioaddr + PktStatus), + window_read16(vp, 4, Wn4_FIFODiag)); + /* Slight code bloat to be user friendly. */ + if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88) + pr_err("%s: Transmitter encountered 16 collisions --" + " network cable problem?\n", dev->name); + if (ioread16(ioaddr + EL3_STATUS) & IntLatch) { + pr_err("%s: Interrupt posted but not delivered --" + " IRQ blocked by another device?\n", dev->name); + /* Bad idea here.. but we might as well handle a few events. */ + { + /* + * Block interrupts because vortex_interrupt does a bare spin_lock() + */ + unsigned long flags; + local_irq_save(flags); + if (vp->full_bus_master_tx) + boomerang_interrupt(dev->irq, dev); + else + vortex_interrupt(dev->irq, dev); + local_irq_restore(flags); + } + } + + if (vortex_debug > 0) + dump_tx_ring(dev); + + issue_and_wait(dev, TxReset); + + dev->stats.tx_errors++; + if (vp->full_bus_master_tx) { + pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name); + if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0) + iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc), + ioaddr + DownListPtr); + if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE) + netif_wake_queue (dev); + if (vp->drv_flags & IS_BOOMERANG) + iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); + iowrite16(DownUnstall, ioaddr + EL3_CMD); + } else { + dev->stats.tx_dropped++; + netif_wake_queue(dev); + } + + /* Issue Tx Enable */ + iowrite16(TxEnable, ioaddr + EL3_CMD); + dev->trans_start = jiffies; /* prevent tx timeout */ +} + +/* + * Handle uncommon interrupt sources. This is a separate routine to minimize + * the cache impact. + */ +static void +vortex_error(struct net_device *dev, int status) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int do_tx_reset = 0, reset_mask = 0; + unsigned char tx_status = 0; + + if (vortex_debug > 2) { + pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status); + } + + if (status & TxComplete) { /* Really "TxError" for us. */ + tx_status = ioread8(ioaddr + TxStatus); + /* Presumably a tx-timeout. We must merely re-enable. */ + if (vortex_debug > 2 || + (tx_status != 0x88 && vortex_debug > 0)) { + pr_err("%s: Transmit error, Tx status register %2.2x.\n", + dev->name, tx_status); + if (tx_status == 0x82) { + pr_err("Probably a duplex mismatch. See " + "Documentation/networking/vortex.txt\n"); + } + dump_tx_ring(dev); + } + if (tx_status & 0x14) dev->stats.tx_fifo_errors++; + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x08) vp->xstats.tx_max_collisions++; + iowrite8(0, ioaddr + TxStatus); + if (tx_status & 0x30) { /* txJabber or txUnderrun */ + do_tx_reset = 1; + } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */ + do_tx_reset = 1; + reset_mask = 0x0108; /* Reset interface logic, but not download logic */ + } else { /* Merely re-enable the transmitter. */ + iowrite16(TxEnable, ioaddr + EL3_CMD); + } + } + + if (status & RxEarly) /* Rx early is unused. */ + iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD); + + if (status & StatsFull) { /* Empty statistics. */ + static int DoneDidThat; + if (vortex_debug > 4) + pr_debug("%s: Updating stats.\n", dev->name); + update_stats(ioaddr, dev); + /* HACK: Disable statistics as an interrupt source. */ + /* This occurs when we have the wrong media type! */ + if (DoneDidThat == 0 && + ioread16(ioaddr + EL3_STATUS) & StatsFull) { + pr_warning("%s: Updating statistics failed, disabling " + "stats as an interrupt source.\n", dev->name); + iowrite16(SetIntrEnb | + (window_read16(vp, 5, 10) & ~StatsFull), + ioaddr + EL3_CMD); + vp->intr_enable &= ~StatsFull; + DoneDidThat++; + } + } + if (status & IntReq) { /* Restore all interrupt sources. */ + iowrite16(vp->status_enable, ioaddr + EL3_CMD); + iowrite16(vp->intr_enable, ioaddr + EL3_CMD); + } + if (status & HostError) { + u16 fifo_diag; + fifo_diag = window_read16(vp, 4, Wn4_FIFODiag); + pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n", + dev->name, fifo_diag); + /* Adapter failure requires Tx/Rx reset and reinit. */ + if (vp->full_bus_master_tx) { + int bus_status = ioread32(ioaddr + PktStatus); + /* 0x80000000 PCI master abort. */ + /* 0x40000000 PCI target abort. */ + if (vortex_debug) + pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status); + + /* In this case, blow the card away */ + /* Must not enter D3 or we can't legally issue the reset! */ + vortex_down(dev, 0); + issue_and_wait(dev, TotalReset | 0xff); + vortex_up(dev); /* AKPM: bug. vortex_up() assumes that the rx ring is full. It may not be. */ + } else if (fifo_diag & 0x0400) + do_tx_reset = 1; + if (fifo_diag & 0x3000) { + /* Reset Rx fifo and upload logic */ + issue_and_wait(dev, RxReset|0x07); + /* Set the Rx filter to the current state. */ + set_rx_mode(dev); + /* enable 802.1q VLAN tagged frames */ + set_8021q_mode(dev, 1); + iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ + iowrite16(AckIntr | HostError, ioaddr + EL3_CMD); + } + } + + if (do_tx_reset) { + issue_and_wait(dev, TxReset|reset_mask); + iowrite16(TxEnable, ioaddr + EL3_CMD); + if (!vp->full_bus_master_tx) + netif_wake_queue(dev); + } +} + +static netdev_tx_t +vortex_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + /* Put out the doubleword header... */ + iowrite32(skb->len, ioaddr + TX_FIFO); + if (vp->bus_master) { + /* Set the bus-master controller to transfer the packet. */ + int len = (skb->len + 3) & ~3; + vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len, + PCI_DMA_TODEVICE); + spin_lock_irq(&vp->window_lock); + window_set(vp, 7); + iowrite32(vp->tx_skb_dma, ioaddr + Wn7_MasterAddr); + iowrite16(len, ioaddr + Wn7_MasterLen); + spin_unlock_irq(&vp->window_lock); + vp->tx_skb = skb; + iowrite16(StartDMADown, ioaddr + EL3_CMD); + /* netif_wake_queue() will be called at the DMADone interrupt. */ + } else { + /* ... and the packet rounded to a doubleword. */ + iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + dev_kfree_skb (skb); + if (ioread16(ioaddr + TxFree) > 1536) { + netif_start_queue (dev); /* AKPM: redundant? */ + } else { + /* Interrupt us when the FIFO has room for max-sized packet. */ + netif_stop_queue(dev); + iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + } + } + + + /* Clear the Tx status stack. */ + { + int tx_status; + int i = 32; + + while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) { + if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ + if (vortex_debug > 2) + pr_debug("%s: Tx error, status %2.2x.\n", + dev->name, tx_status); + if (tx_status & 0x04) dev->stats.tx_fifo_errors++; + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) { + issue_and_wait(dev, TxReset); + } + iowrite16(TxEnable, ioaddr + EL3_CMD); + } + iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */ + } + } + return NETDEV_TX_OK; +} + +static netdev_tx_t +boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + /* Calculate the next Tx descriptor entry. */ + int entry = vp->cur_tx % TX_RING_SIZE; + struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE]; + unsigned long flags; + + if (vortex_debug > 6) { + pr_debug("boomerang_start_xmit()\n"); + pr_debug("%s: Trying to send a packet, Tx index %d.\n", + dev->name, vp->cur_tx); + } + + /* + * We can't allow a recursion from our interrupt handler back into the + * tx routine, as they take the same spin lock, and that causes + * deadlock. Just return NETDEV_TX_BUSY and let the stack try again in + * a bit + */ + if (vp->handling_irq) + return NETDEV_TX_BUSY; + + if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { + if (vortex_debug > 0) + pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n", + dev->name); + netif_stop_queue(dev); + return NETDEV_TX_BUSY; + } + + vp->tx_skbuff[entry] = skb; + + vp->tx_ring[entry].next = 0; +#if DO_ZEROCOPY + if (skb->ip_summed != CHECKSUM_PARTIAL) + vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); + else + vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum); + + if (!skb_shinfo(skb)->nr_frags) { + vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, + skb->len, PCI_DMA_TODEVICE)); + vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG); + } else { + int i; + + vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, + skb_headlen(skb), PCI_DMA_TODEVICE)); + vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb)); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + vp->tx_ring[entry].frag[i+1].addr = + cpu_to_le32(pci_map_single(VORTEX_PCI(vp), + (void*)page_address(frag->page) + frag->page_offset, + frag->size, PCI_DMA_TODEVICE)); + + if (i == skb_shinfo(skb)->nr_frags-1) + vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size|LAST_FRAG); + else + vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(frag->size); + } + } +#else + vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE)); + vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG); + vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded); +#endif + + spin_lock_irqsave(&vp->lock, flags); + /* Wait for the stall to complete. */ + issue_and_wait(dev, DownStall); + prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)); + if (ioread32(ioaddr + DownListPtr) == 0) { + iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr); + vp->queued_packet++; + } + + vp->cur_tx++; + if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) { + netif_stop_queue (dev); + } else { /* Clear previous interrupt enable. */ +#if defined(tx_interrupt_mitigation) + /* Dubious. If in boomeang_interrupt "faster" cyclone ifdef + * were selected, this would corrupt DN_COMPLETE. No? + */ + prev_entry->status &= cpu_to_le32(~TxIntrUploaded); +#endif + } + iowrite16(DownUnstall, ioaddr + EL3_CMD); + spin_unlock_irqrestore(&vp->lock, flags); + return NETDEV_TX_OK; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ + +/* + * This is the ISR for the vortex series chips. + * full_bus_master_tx == 0 && full_bus_master_rx == 0 + */ + +static irqreturn_t +vortex_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr; + int status; + int work_done = max_interrupt_work; + int handled = 0; + + ioaddr = vp->ioaddr; + spin_lock(&vp->lock); + + status = ioread16(ioaddr + EL3_STATUS); + + if (vortex_debug > 6) + pr_debug("vortex_interrupt(). status=0x%4x\n", status); + + if ((status & IntLatch) == 0) + goto handler_exit; /* No interrupt: shared IRQs cause this */ + handled = 1; + + if (status & IntReq) { + status |= vp->deferred; + vp->deferred = 0; + } + + if (status == 0xffff) /* h/w no longer present (hotplug)? */ + goto handler_exit; + + if (vortex_debug > 4) + pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", + dev->name, status, ioread8(ioaddr + Timer)); + + spin_lock(&vp->window_lock); + window_set(vp, 7); + + do { + if (vortex_debug > 5) + pr_debug("%s: In interrupt loop, status %4.4x.\n", + dev->name, status); + if (status & RxComplete) + vortex_rx(dev); + + if (status & TxAvailable) { + if (vortex_debug > 5) + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue (dev); + } + + if (status & DMADone) { + if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) { + iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */ + pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */ + if (ioread16(ioaddr + TxFree) > 1536) { + /* + * AKPM: FIXME: I don't think we need this. If the queue was stopped due to + * insufficient FIFO room, the TxAvailable test will succeed and call + * netif_wake_queue() + */ + netif_wake_queue(dev); + } else { /* Interrupt when FIFO has room for max-sized packet. */ + iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD); + netif_stop_queue(dev); + } + } + } + /* Check for all uncommon interrupts at once. */ + if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) { + if (status == 0xffff) + break; + if (status & RxEarly) + vortex_rx(dev); + spin_unlock(&vp->window_lock); + vortex_error(dev, status); + spin_lock(&vp->window_lock); + window_set(vp, 7); + } + + if (--work_done < 0) { + pr_warning("%s: Too much work in interrupt, status %4.4x.\n", + dev->name, status); + /* Disable all pending interrupts. */ + do { + vp->deferred |= status; + iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), + ioaddr + EL3_CMD); + iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); + } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); + /* The timer will reenable interrupts. */ + mod_timer(&vp->timer, jiffies + 1*HZ); + break; + } + /* Acknowledge the IRQ. */ + iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + } while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); + + spin_unlock(&vp->window_lock); + + if (vortex_debug > 4) + pr_debug("%s: exiting interrupt, status %4.4x.\n", + dev->name, status); +handler_exit: + spin_unlock(&vp->lock); + return IRQ_RETVAL(handled); +} + +/* + * This is the ISR for the boomerang series chips. + * full_bus_master_tx == 1 && full_bus_master_rx == 1 + */ + +static irqreturn_t +boomerang_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr; + int status; + int work_done = max_interrupt_work; + + ioaddr = vp->ioaddr; + + + /* + * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout + * and boomerang_start_xmit + */ + spin_lock(&vp->lock); + vp->handling_irq = 1; + + status = ioread16(ioaddr + EL3_STATUS); + + if (vortex_debug > 6) + pr_debug("boomerang_interrupt. status=0x%4x\n", status); + + if ((status & IntLatch) == 0) + goto handler_exit; /* No interrupt: shared IRQs can cause this */ + + if (status == 0xffff) { /* h/w no longer present (hotplug)? */ + if (vortex_debug > 1) + pr_debug("boomerang_interrupt(1): status = 0xffff\n"); + goto handler_exit; + } + + if (status & IntReq) { + status |= vp->deferred; + vp->deferred = 0; + } + + if (vortex_debug > 4) + pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n", + dev->name, status, ioread8(ioaddr + Timer)); + do { + if (vortex_debug > 5) + pr_debug("%s: In interrupt loop, status %4.4x.\n", + dev->name, status); + if (status & UpComplete) { + iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD); + if (vortex_debug > 5) + pr_debug("boomerang_interrupt->boomerang_rx\n"); + boomerang_rx(dev); + } + + if (status & DownComplete) { + unsigned int dirty_tx = vp->dirty_tx; + + iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD); + while (vp->cur_tx - dirty_tx > 0) { + int entry = dirty_tx % TX_RING_SIZE; +#if 1 /* AKPM: the latter is faster, but cyclone-only */ + if (ioread32(ioaddr + DownListPtr) == + vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc)) + break; /* It still hasn't been processed. */ +#else + if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0) + break; /* It still hasn't been processed. */ +#endif + + if (vp->tx_skbuff[entry]) { + struct sk_buff *skb = vp->tx_skbuff[entry]; +#if DO_ZEROCOPY + int i; + for (i=0; i<=skb_shinfo(skb)->nr_frags; i++) + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[entry].frag[i].addr), + le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF, + PCI_DMA_TODEVICE); +#else + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE); +#endif + dev_kfree_skb_irq(skb); + vp->tx_skbuff[entry] = NULL; + } else { + pr_debug("boomerang_interrupt: no skb!\n"); + } + /* dev->stats.tx_packets++; Counted below. */ + dirty_tx++; + } + vp->dirty_tx = dirty_tx; + if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) { + if (vortex_debug > 6) + pr_debug("boomerang_interrupt: wake queue\n"); + netif_wake_queue (dev); + } + } + + /* Check for all uncommon interrupts at once. */ + if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) + vortex_error(dev, status); + + if (--work_done < 0) { + pr_warning("%s: Too much work in interrupt, status %4.4x.\n", + dev->name, status); + /* Disable all pending interrupts. */ + do { + vp->deferred |= status; + iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable), + ioaddr + EL3_CMD); + iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD); + } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch); + /* The timer will reenable interrupts. */ + mod_timer(&vp->timer, jiffies + 1*HZ); + break; + } + /* Acknowledge the IRQ. */ + iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + if (vp->cb_fn_base) /* The PCMCIA people are idiots. */ + iowrite32(0x8000, vp->cb_fn_base + 4); + + } while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch); + + if (vortex_debug > 4) + pr_debug("%s: exiting interrupt, status %4.4x.\n", + dev->name, status); +handler_exit: + vp->handling_irq = 0; + spin_unlock(&vp->lock); + return IRQ_HANDLED; +} + +static int vortex_rx(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int i; + short rx_status; + + if (vortex_debug > 5) + pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n", + ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus)); + while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) { + if (rx_status & 0x4000) { /* Error, update stats. */ + unsigned char rx_error = ioread8(ioaddr + RxErrors); + if (vortex_debug > 2) + pr_debug(" Rx error: status %2.2x.\n", rx_error); + dev->stats.rx_errors++; + if (rx_error & 0x01) dev->stats.rx_over_errors++; + if (rx_error & 0x02) dev->stats.rx_length_errors++; + if (rx_error & 0x04) dev->stats.rx_frame_errors++; + if (rx_error & 0x08) dev->stats.rx_crc_errors++; + if (rx_error & 0x10) dev->stats.rx_length_errors++; + } else { + /* The packet length: up to 4.5K!. */ + int pkt_len = rx_status & 0x1fff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len + 5); + if (vortex_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + /* 'skb_put()' points to the start of sk_buff data area. */ + if (vp->bus_master && + ! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) { + dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len), + pkt_len, PCI_DMA_FROMDEVICE); + iowrite32(dma, ioaddr + Wn7_MasterAddr); + iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen); + iowrite16(StartDMAUp, ioaddr + EL3_CMD); + while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000) + ; + pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE); + } else { + ioread32_rep(ioaddr + RX_FIFO, + skb_put(skb, pkt_len), + (pkt_len + 3) >> 2); + } + iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + /* Wait a limited time to go to next packet. */ + for (i = 200; i >= 0; i--) + if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) + break; + continue; + } else if (vortex_debug > 0) + pr_notice("%s: No memory to allocate a sk_buff of size %d.\n", + dev->name, pkt_len); + dev->stats.rx_dropped++; + } + issue_and_wait(dev, RxDiscard); + } + + return 0; +} + +static int +boomerang_rx(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + int entry = vp->cur_rx % RX_RING_SIZE; + void __iomem *ioaddr = vp->ioaddr; + int rx_status; + int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx; + + if (vortex_debug > 5) + pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS)); + + while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){ + if (--rx_work_limit < 0) + break; + if (rx_status & RxDError) { /* Error, update stats. */ + unsigned char rx_error = rx_status >> 16; + if (vortex_debug > 2) + pr_debug(" Rx error: status %2.2x.\n", rx_error); + dev->stats.rx_errors++; + if (rx_error & 0x01) dev->stats.rx_over_errors++; + if (rx_error & 0x02) dev->stats.rx_length_errors++; + if (rx_error & 0x04) dev->stats.rx_frame_errors++; + if (rx_error & 0x08) dev->stats.rx_crc_errors++; + if (rx_error & 0x10) dev->stats.rx_length_errors++; + } else { + /* The packet length: up to 4.5K!. */ + int pkt_len = rx_status & 0x1fff; + struct sk_buff *skb; + dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr); + + if (vortex_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + + /* Check if the packet is long enough to just accept without + copying to a properly sized skbuff. */ + if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + pci_dma_sync_single_for_cpu(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + /* 'skb_put()' points to the start of sk_buff data area. */ + memcpy(skb_put(skb, pkt_len), + vp->rx_skbuff[entry]->data, + pkt_len); + pci_dma_sync_single_for_device(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + vp->rx_copy++; + } else { + /* Pass up the skbuff already on the Rx ring. */ + skb = vp->rx_skbuff[entry]; + vp->rx_skbuff[entry] = NULL; + skb_put(skb, pkt_len); + pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + vp->rx_nocopy++; + } + skb->protocol = eth_type_trans(skb, dev); + { /* Use hardware checksum info. */ + int csum_bits = rx_status & 0xee000000; + if (csum_bits && + (csum_bits == (IPChksumValid | TCPChksumValid) || + csum_bits == (IPChksumValid | UDPChksumValid))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + vp->rx_csumhits++; + } + } + netif_rx(skb); + dev->stats.rx_packets++; + } + entry = (++vp->cur_rx) % RX_RING_SIZE; + } + /* Refill the Rx ring buffers. */ + for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { + struct sk_buff *skb; + entry = vp->dirty_rx % RX_RING_SIZE; + if (vp->rx_skbuff[entry] == NULL) { + skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ); + if (skb == NULL) { + static unsigned long last_jif; + if (time_after(jiffies, last_jif + 10 * HZ)) { + pr_warning("%s: memory shortage\n", dev->name); + last_jif = jiffies; + } + if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) + mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); + break; /* Bad news! */ + } + + vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); + vp->rx_skbuff[entry] = skb; + } + vp->rx_ring[entry].status = 0; /* Clear complete bit. */ + iowrite16(UpUnstall, ioaddr + EL3_CMD); + } + return 0; +} + +/* + * If we've hit a total OOM refilling the Rx ring we poll once a second + * for some memory. Otherwise there is no way to restart the rx process. + */ +static void +rx_oom_timer(unsigned long arg) +{ + struct net_device *dev = (struct net_device *)arg; + struct vortex_private *vp = netdev_priv(dev); + + spin_lock_irq(&vp->lock); + if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */ + boomerang_rx(dev); + if (vortex_debug > 1) { + pr_debug("%s: rx_oom_timer %s\n", dev->name, + ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying"); + } + spin_unlock_irq(&vp->lock); +} + +static void +vortex_down(struct net_device *dev, int final_down) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + netif_stop_queue (dev); + + del_timer_sync(&vp->rx_oom_timer); + del_timer_sync(&vp->timer); + + /* Turn off statistics ASAP. We update dev->stats below. */ + iowrite16(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + iowrite16(RxDisable, ioaddr + EL3_CMD); + iowrite16(TxDisable, ioaddr + EL3_CMD); + + /* Disable receiving 802.1q tagged frames */ + set_8021q_mode(dev, 0); + + if (dev->if_port == XCVR_10base2) + /* Turn off thinnet power. Green! */ + iowrite16(StopCoax, ioaddr + EL3_CMD); + + iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + + update_stats(ioaddr, dev); + if (vp->full_bus_master_rx) + iowrite32(0, ioaddr + UpListPtr); + if (vp->full_bus_master_tx) + iowrite32(0, ioaddr + DownListPtr); + + if (final_down && VORTEX_PCI(vp)) { + vp->pm_state_valid = 1; + pci_save_state(VORTEX_PCI(vp)); + acpi_set_WOL(dev); + } +} + +static int +vortex_close(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int i; + + if (netif_device_present(dev)) + vortex_down(dev, 1); + + if (vortex_debug > 1) { + pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n", + dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus)); + pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d" + " tx_queued %d Rx pre-checksummed %d.\n", + dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits); + } + +#if DO_ZEROCOPY + if (vp->rx_csumhits && + (vp->drv_flags & HAS_HWCKSM) == 0 && + (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) { + pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name); + } +#endif + + free_irq(dev->irq, dev); + + if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ + for (i = 0; i < RX_RING_SIZE; i++) + if (vp->rx_skbuff[i]) { + pci_unmap_single( VORTEX_PCI(vp), le32_to_cpu(vp->rx_ring[i].addr), + PKT_BUF_SZ, PCI_DMA_FROMDEVICE); + dev_kfree_skb(vp->rx_skbuff[i]); + vp->rx_skbuff[i] = NULL; + } + } + if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ + for (i = 0; i < TX_RING_SIZE; i++) { + if (vp->tx_skbuff[i]) { + struct sk_buff *skb = vp->tx_skbuff[i]; +#if DO_ZEROCOPY + int k; + + for (k=0; k<=skb_shinfo(skb)->nr_frags; k++) + pci_unmap_single(VORTEX_PCI(vp), + le32_to_cpu(vp->tx_ring[i].frag[k].addr), + le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF, + PCI_DMA_TODEVICE); +#else + pci_unmap_single(VORTEX_PCI(vp), le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE); +#endif + dev_kfree_skb(skb); + vp->tx_skbuff[i] = NULL; + } + } + } + + return 0; +} + +static void +dump_tx_ring(struct net_device *dev) +{ + if (vortex_debug > 0) { + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + if (vp->full_bus_master_tx) { + int i; + int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */ + + pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n", + vp->full_bus_master_tx, + vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE, + vp->cur_tx, vp->cur_tx % TX_RING_SIZE); + pr_err(" Transmit list %8.8x vs. %p.\n", + ioread32(ioaddr + DownListPtr), + &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]); + issue_and_wait(dev, DownStall); + for (i = 0; i < TX_RING_SIZE; i++) { + unsigned int length; + +#if DO_ZEROCOPY + length = le32_to_cpu(vp->tx_ring[i].frag[0].length); +#else + length = le32_to_cpu(vp->tx_ring[i].length); +#endif + pr_err(" %d: @%p length %8.8x status %8.8x\n", + i, &vp->tx_ring[i], length, + le32_to_cpu(vp->tx_ring[i].status)); + } + if (!stalled) + iowrite16(DownUnstall, ioaddr + EL3_CMD); + } + } +} + +static struct net_device_stats *vortex_get_stats(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + unsigned long flags; + + if (netif_device_present(dev)) { /* AKPM: Used to be netif_running */ + spin_lock_irqsave (&vp->lock, flags); + update_stats(ioaddr, dev); + spin_unlock_irqrestore (&vp->lock, flags); + } + return &dev->stats; +} + +/* Update statistics. + Unlike with the EL3 we need not worry about interrupts changing + the window setting from underneath us, but we must still guard + against a race condition with a StatsUpdate interrupt updating the + table. This is done by checking that the ASM (!) code generated uses + atomic updates with '+='. + */ +static void update_stats(void __iomem *ioaddr, struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + + /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ + /* Switch to the stats window, and read everything. */ + dev->stats.tx_carrier_errors += window_read8(vp, 6, 0); + dev->stats.tx_heartbeat_errors += window_read8(vp, 6, 1); + dev->stats.tx_window_errors += window_read8(vp, 6, 4); + dev->stats.rx_fifo_errors += window_read8(vp, 6, 5); + dev->stats.tx_packets += window_read8(vp, 6, 6); + dev->stats.tx_packets += (window_read8(vp, 6, 9) & + 0x30) << 4; + /* Rx packets */ window_read8(vp, 6, 7); /* Must read to clear */ + /* Don't bother with register 9, an extension of registers 6&7. + If we do use the 6&7 values the atomic update assumption above + is invalid. */ + dev->stats.rx_bytes += window_read16(vp, 6, 10); + dev->stats.tx_bytes += window_read16(vp, 6, 12); + /* Extra stats for get_ethtool_stats() */ + vp->xstats.tx_multiple_collisions += window_read8(vp, 6, 2); + vp->xstats.tx_single_collisions += window_read8(vp, 6, 3); + vp->xstats.tx_deferred += window_read8(vp, 6, 8); + vp->xstats.rx_bad_ssd += window_read8(vp, 4, 12); + + dev->stats.collisions = vp->xstats.tx_multiple_collisions + + vp->xstats.tx_single_collisions + + vp->xstats.tx_max_collisions; + + { + u8 up = window_read8(vp, 4, 13); + dev->stats.rx_bytes += (up & 0x0f) << 16; + dev->stats.tx_bytes += (up & 0xf0) << 12; + } +} + +static int vortex_nway_reset(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + + return mii_nway_restart(&vp->mii); +} + +static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct vortex_private *vp = netdev_priv(dev); + + return mii_ethtool_gset(&vp->mii, cmd); +} + +static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct vortex_private *vp = netdev_priv(dev); + + return mii_ethtool_sset(&vp->mii, cmd); +} + +static u32 vortex_get_msglevel(struct net_device *dev) +{ + return vortex_debug; +} + +static void vortex_set_msglevel(struct net_device *dev, u32 dbg) +{ + vortex_debug = dbg; +} + +static int vortex_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return VORTEX_NUM_STATS; + default: + return -EOPNOTSUPP; + } +} + +static void vortex_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + unsigned long flags; + + spin_lock_irqsave(&vp->lock, flags); + update_stats(ioaddr, dev); + spin_unlock_irqrestore(&vp->lock, flags); + + data[0] = vp->xstats.tx_deferred; + data[1] = vp->xstats.tx_max_collisions; + data[2] = vp->xstats.tx_multiple_collisions; + data[3] = vp->xstats.tx_single_collisions; + data[4] = vp->xstats.rx_bad_ssd; +} + + +static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(data, ðtool_stats_keys, sizeof(ethtool_stats_keys)); + break; + default: + WARN_ON(1); + break; + } +} + +static void vortex_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct vortex_private *vp = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + if (VORTEX_PCI(vp)) { + strcpy(info->bus_info, pci_name(VORTEX_PCI(vp))); + } else { + if (VORTEX_EISA(vp)) + strcpy(info->bus_info, dev_name(vp->gendev)); + else + sprintf(info->bus_info, "EISA 0x%lx %d", + dev->base_addr, dev->irq); + } +} + +static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct vortex_private *vp = netdev_priv(dev); + + if (!VORTEX_PCI(vp)) + return; + + wol->supported = WAKE_MAGIC; + + wol->wolopts = 0; + if (vp->enable_wol) + wol->wolopts |= WAKE_MAGIC; +} + +static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct vortex_private *vp = netdev_priv(dev); + + if (!VORTEX_PCI(vp)) + return -EOPNOTSUPP; + + if (wol->wolopts & ~WAKE_MAGIC) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) + vp->enable_wol = 1; + else + vp->enable_wol = 0; + acpi_set_WOL(dev); + + return 0; +} + +static const struct ethtool_ops vortex_ethtool_ops = { + .get_drvinfo = vortex_get_drvinfo, + .get_strings = vortex_get_strings, + .get_msglevel = vortex_get_msglevel, + .set_msglevel = vortex_set_msglevel, + .get_ethtool_stats = vortex_get_ethtool_stats, + .get_sset_count = vortex_get_sset_count, + .get_settings = vortex_get_settings, + .set_settings = vortex_set_settings, + .get_link = ethtool_op_get_link, + .nway_reset = vortex_nway_reset, + .get_wol = vortex_get_wol, + .set_wol = vortex_set_wol, +}; + +#ifdef CONFIG_PCI +/* + * Must power the device up to do MDIO operations + */ +static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + int err; + struct vortex_private *vp = netdev_priv(dev); + pci_power_t state = 0; + + if(VORTEX_PCI(vp)) + state = VORTEX_PCI(vp)->current_state; + + /* The kernel core really should have pci_get_power_state() */ + + if(state != 0) + pci_set_power_state(VORTEX_PCI(vp), PCI_D0); + err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL); + if(state != 0) + pci_set_power_state(VORTEX_PCI(vp), state); + + return err; +} +#endif + + +/* Pre-Cyclone chips have no documented multicast filter, so the only + multicast setting is to receive all multicast frames. At least + the chip has a very clean way to set the mode, unlike many others. */ +static void set_rx_mode(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + int new_mode; + + if (dev->flags & IFF_PROMISC) { + if (vortex_debug > 3) + pr_notice("%s: Setting promiscuous mode.\n", dev->name); + new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm; + } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { + new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast; + } else + new_mode = SetRxFilter | RxStation | RxBroadcast; + + iowrite16(new_mode, ioaddr + EL3_CMD); +} + +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) +/* Setup the card so that it can receive frames with an 802.1q VLAN tag. + Note that this must be done after each RxReset due to some backwards + compatibility logic in the Cyclone and Tornado ASICs */ + +/* The Ethernet Type used for 802.1q tagged frames */ +#define VLAN_ETHER_TYPE 0x8100 + +static void set_8021q_mode(struct net_device *dev, int enable) +{ + struct vortex_private *vp = netdev_priv(dev); + int mac_ctrl; + + if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) { + /* cyclone and tornado chipsets can recognize 802.1q + * tagged frames and treat them correctly */ + + int max_pkt_size = dev->mtu+14; /* MTU+Ethernet header */ + if (enable) + max_pkt_size += 4; /* 802.1Q VLAN tag */ + + window_write16(vp, max_pkt_size, 3, Wn3_MaxPktSize); + + /* set VlanEtherType to let the hardware checksumming + treat tagged frames correctly */ + window_write16(vp, VLAN_ETHER_TYPE, 7, Wn7_VlanEtherType); + } else { + /* on older cards we have to enable large frames */ + + vp->large_frames = dev->mtu > 1500 || enable; + + mac_ctrl = window_read16(vp, 3, Wn3_MAC_Ctrl); + if (vp->large_frames) + mac_ctrl |= 0x40; + else + mac_ctrl &= ~0x40; + window_write16(vp, mac_ctrl, 3, Wn3_MAC_Ctrl); + } +} +#else + +static void set_8021q_mode(struct net_device *dev, int enable) +{ +} + + +#endif + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. */ + +/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back PCI I/O cycles, but we insert a delay to avoid + "overclocking" issues. */ +static void mdio_delay(struct vortex_private *vp) +{ + window_read32(vp, 4, Wn4_PhysicalMgmt); +} + +#define MDIO_SHIFT_CLK 0x01 +#define MDIO_DIR_WRITE 0x04 +#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE) +#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE) +#define MDIO_DATA_READ 0x02 +#define MDIO_ENB_IN 0x00 + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(struct vortex_private *vp, int bits) +{ + /* Establish sync by sending at least 32 logic ones. */ + while (-- bits >= 0) { + window_write16(vp, MDIO_DATA_WRITE1, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } +} + +static int mdio_read(struct net_device *dev, int phy_id, int location) +{ + int i; + struct vortex_private *vp = netdev_priv(dev); + int read_cmd = (0xf6 << 10) | (phy_id << 5) | location; + unsigned int retval = 0; + + spin_lock_bh(&vp->mii_lock); + + if (mii_preamble_required) + mdio_sync(vp, 32); + + /* Shift the read command bits out. */ + for (i = 14; i >= 0; i--) { + int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + window_write16(vp, dataval, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, dataval | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + retval = (retval << 1) | + ((window_read16(vp, 4, Wn4_PhysicalMgmt) & + MDIO_DATA_READ) ? 1 : 0); + window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + + spin_unlock_bh(&vp->mii_lock); + + return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff; +} + +static void mdio_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct vortex_private *vp = netdev_priv(dev); + int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value; + int i; + + spin_lock_bh(&vp->mii_lock); + + if (mii_preamble_required) + mdio_sync(vp, 32); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; + window_write16(vp, dataval, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, dataval | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + /* Leave the interface idle. */ + for (i = 1; i >= 0; i--) { + window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK, + 4, Wn4_PhysicalMgmt); + mdio_delay(vp); + } + + spin_unlock_bh(&vp->mii_lock); +} + +/* ACPI: Advanced Configuration and Power Interface. */ +/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */ +static void acpi_set_WOL(struct net_device *dev) +{ + struct vortex_private *vp = netdev_priv(dev); + void __iomem *ioaddr = vp->ioaddr; + + device_set_wakeup_enable(vp->gendev, vp->enable_wol); + + if (vp->enable_wol) { + /* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */ + window_write16(vp, 2, 7, 0x0c); + /* The RxFilter must accept the WOL frames. */ + iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD); + iowrite16(RxEnable, ioaddr + EL3_CMD); + + if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) { + pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp))); + + vp->enable_wol = 0; + return; + } + + if (VORTEX_PCI(vp)->current_state < PCI_D3hot) + return; + + /* Change the power state to D3; RxEnable doesn't take effect. */ + pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot); + } +} + + +static void __devexit vortex_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct vortex_private *vp; + + if (!dev) { + pr_err("vortex_remove_one called for Compaq device!\n"); + BUG(); + } + + vp = netdev_priv(dev); + + if (vp->cb_fn_base) + pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base); + + unregister_netdev(dev); + + if (VORTEX_PCI(vp)) { + pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */ + if (vp->pm_state_valid) + pci_restore_state(VORTEX_PCI(vp)); + pci_disable_device(VORTEX_PCI(vp)); + } + /* Should really use issue_and_wait() here */ + iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14), + vp->ioaddr + EL3_CMD); + + pci_iounmap(VORTEX_PCI(vp), vp->ioaddr); + + pci_free_consistent(pdev, + sizeof(struct boom_rx_desc) * RX_RING_SIZE + + sizeof(struct boom_tx_desc) * TX_RING_SIZE, + vp->rx_ring, + vp->rx_ring_dma); + if (vp->must_free_region) + release_region(dev->base_addr, vp->io_size); + free_netdev(dev); +} + + +static struct pci_driver vortex_driver = { + .name = "3c59x", + .probe = vortex_init_one, + .remove = __devexit_p(vortex_remove_one), + .id_table = vortex_pci_tbl, + .driver.pm = VORTEX_PM_OPS, +}; + + +static int vortex_have_pci; +static int vortex_have_eisa; + + +static int __init vortex_init(void) +{ + int pci_rc, eisa_rc; + + pci_rc = pci_register_driver(&vortex_driver); + eisa_rc = vortex_eisa_init(); + + if (pci_rc == 0) + vortex_have_pci = 1; + if (eisa_rc > 0) + vortex_have_eisa = 1; + + return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV; +} + + +static void __exit vortex_eisa_cleanup(void) +{ + struct vortex_private *vp; + void __iomem *ioaddr; + +#ifdef CONFIG_EISA + /* Take care of the EISA devices */ + eisa_driver_unregister(&vortex_eisa_driver); +#endif + + if (compaq_net_device) { + vp = netdev_priv(compaq_net_device); + ioaddr = ioport_map(compaq_net_device->base_addr, + VORTEX_TOTAL_SIZE); + + unregister_netdev(compaq_net_device); + iowrite16(TotalReset, ioaddr + EL3_CMD); + release_region(compaq_net_device->base_addr, + VORTEX_TOTAL_SIZE); + + free_netdev(compaq_net_device); + } +} + + +static void __exit vortex_cleanup(void) +{ + if (vortex_have_pci) + pci_unregister_driver(&vortex_driver); + if (vortex_have_eisa) + vortex_eisa_cleanup(); +} + + +module_init(vortex_init); +module_exit(vortex_cleanup); |
